-
7fe84ea5
by Zubin Duggal at 2026-04-07T19:11:52+05:30
compiler: Warn when -finfo-table-map is used with -fllvm
These are currently not supported together.
Fixes #26435
-
4a45a7da
by Matthew Pickering at 2026-04-08T04:37:29-04:00
packaging: correctly propagate build/host/target to bindist configure script
At the moment the host and target which we will produce a compiler for
is fixed at the initial configure time. Therefore we need to persist
the choice made at this time into the installation bindist as well so we
look for the right tools, with the right prefixes at install time.
In the future, we want to provide a bit more control about what kind of
bindist we produce so the logic about what the host/target will have to
be written by hadrian rather than persisted by the configure script. In
particular with cross compilers we want to either build a normal stage 2
cross bindist or a stage 3 bindist, which creates a bindist which has a
native compiler for the target platform.
Fixes #21970
Co-authored-by: Sven Tennie <sven.tennie@gmail.com>
-
b0950df6
by Sven Tennie at 2026-04-08T04:37:29-04:00
Cross --host and --target no longer required for cross (#21970)
We set sane defaults in the configure script. Thus, these paramenters
aren't required any longer.
-
fef35216
by Sven Tennie at 2026-04-08T04:37:30-04:00
ci: Define USER_CONF_CC_OPTS_STAGE2 for aarch64/mingw
ghc-toolchain doesn't see $CONF_CC_OPTS_STAGE2 when the bindist gets
configured. So, the hack to override the compiler gets lost.
-
8dd6f453
by Cheng Shao at 2026-04-08T04:38:11-04:00
ghci: use ShortByteString for LookupSymbol/LookupSymbolInDLL/LookupClosure messages
This patch refactors ghci to use `ShortByteString` for
`LookupSymbol`/`LookupSymbolInDLL`/`LookupClosure` messages as the
first part of #27147.
Co-authored-by: Codex <codex@openai.com>
-
371ef200
by Cheng Shao at 2026-04-08T04:38:11-04:00
ghci: use ShortByteString for MkCostCentres message
This patch refactors ghci to use `ShortByteString` for `MkCostCentres`
messages as a first part of #27147. This also considerably lowers the
memory overhead of breakpoints when cost center profiling is enabled.
-------------------------
Metric Decrease:
interpreter_steplocal
-------------------------
Co-authored-by: Codex <codex@openai.com>
-
4a122bb6
by Phil Hazelden at 2026-04-08T20:49:42-04:00
Implement modifiers syntax.
The `%m` syntax of linear types is now accepted in more places, to allow
use by future extensions, though so far linear types is still the only
consumer.
This may break existing code where it
* Uses -XLinearTypes.
* Has code of the form `a %m -> b`, where `m` can't be inferred to be
kind Multiplicity.
The code can be fixed either by adding a kind annotation, or by setting
`-XLinearTypes -XNoModifiers`.
Proposal:
https://github.com/ghc-proposals/ghc-proposals/blob/master/proposals/0370-modifiers.rst
-
07267f79
by Zubin Duggal at 2026-04-08T20:50:25-04:00
hadrian: Don't include the package hash in the haddock directory
Since GHC 9.8 and hash_unit_ids, haddock urls have looked like`ghc-9.10.3/doc/html/libraries/base-4.20.2.0-39f9/**/*.html`
The inclusion of the hash makes it hard for downstream non-boot packages to properly link to these files, as the hash is not
part of a standard cabal substitution.
Since we only build one version of each package, we don't need the hash to disambiguate anything, we can just remove it.
Fixes #26635
-
0a83b95b
by ARATA Mizuki at 2026-04-08T20:51:18-04:00
testsuite: Allow multiple ways to be run by setting multiple command-line options
This patch allows multiple `--test-way`s to take effect, like:
$ hadrian/build test --test-way=normal --test-way=llvm
Previously, only one way was run if the test speed was 'normal' or 'fast'.
Closes #26926
Co-authored-by: sheaf <sam.derbyshire@gmail.com>
-
e841931c
by Teo Camarasu at 2026-04-08T20:52:00-04:00
doc: improve eventlog-flush-interval flag documentation
We mention the performance cost and how this flag can be turned off.
Resolves #27056
-
e332db25
by Teo Camarasu at 2026-04-08T20:52:01-04:00
docs/user_guide: fix typo
-
5b82080a
by Simon Jakobi at 2026-04-08T20:52:44-04:00
Fix -dsuppress-uniques for free variables in demand signatures
Before: Str=b{sXyZ->S}
With this patch: Str=b{S}
T13143.stderr is updated accordingly.
Fixes #27106.
-
b7a084cc
by Simon Jakobi at 2026-04-08T20:53:27-04:00
Documentation fixes for demand signature notation
Fixes #27115.
-
59391132
by Simon Jakobi at 2026-04-08T20:54:08-04:00
Use upsert for non-deleting map updates
Some compiler functions were using `alter`, despite never removing
any entries: they only update an existing entry or insert a new one.
These functions are converted to using `upsert`:
alter :: (Maybe a -> Maybe a) -> Key -> Map a -> Map a
upsert :: (Maybe a -> a) -> Key -> Map a -> Map a
`upsert` variants are also added to APIs of the various Word64Map
wrapper types.
The precedent for this `upsert` operation is in the containers library:
see https://github.com/haskell/containers/pull/1145
Metrics: compile_time/bytes allocated
-------------------------------------
geo. mean: -0.1%
minimum: -0.5%
maximum: +0.0%
Resolves #27140.
-
da7e82f4
by Cheng Shao at 2026-04-08T20:54:49-04:00
testsuite: fix testsuite run for +ipe again
This patch makes the +ipe flavour transformer pass the entire
testsuite again by dropping stdout/stderr checks of certain tests that
are sensitive to stack layout changes with `+ipe`. Related: #26799.
-
b135a87d
by Zubin Duggal at 2026-04-09T19:36:50+05:30
Bump directory submodule to 1.3.11.0 (unreleased)
-
3a291d07
by Zubin Duggal at 2026-04-09T19:36:50+05:30
Bump file-io submodule to 0.2.0
-
e0ab606d
by Zubin Duggal at 2026-04-10T18:40:20+05:30
Release notes for GHC 10.0
-
e08b9b34
by Zubin Duggal at 2026-04-10T18:40:20+05:30
Bump ghc-prim version to 0.14.0
-
a92aac6e
by Zubin Duggal at 2026-04-10T18:40:20+05:30
Bump template-haskell to 2.25.0.0; update submodule exceptions for TH 2.25
-
f254d9e8
by Zubin Duggal at 2026-04-10T18:40:20+05:30
Bump GHC version to 10.0
-
6ce0368a
by Zubin Duggal at 2026-04-10T18:40:28+05:30
Bump base to 4.23.0.0; update submodules for base 4.24 upper bound
-
702fb8a5
by Zubin Duggal at 2026-04-10T18:40:28+05:30
Bump GHC version to 10.1; update submodules template-haskell-lift and template-haskell-quasiquoter for ghc-internal 10.200
-
75df1ca4
by Zubin Duggal at 2026-04-10T18:40:28+05:30
Use changelog.d for release notes (#26002)
GHC now uses a fragment-based changelog workflow using a custom script adapted from https://codeberg.org/fgaz/changelog-d.
Contributors add a file in changelog.d/ for each user-facing change.
At release time, these are assembled into release notes for sphinx (in RST) format, using
the tool.
New hadrian `changelog` target to generate changelogs
CI job to validate changelog entries for MRs unless skipped with ~"no-changelog" label
Teach sphinx about ghc-mr: extlink to link to MRs
Remove `ghc-package-list` from sphinx, and implement it in changelog-d instead (Fixes #26476).
(cherry picked from commit 989c07249978f418dfde1353abfad453f024d61a)
-
585d7450
by Luite Stegeman at 2026-04-11T02:17:13-04:00
tc: discard warnings in tcUserStmt Plan C
We typecheck let_stmt twice, but we don't want the warnings twice!
see #26233
-
2df604e9
by Sylvain Henry at 2026-04-11T02:19:30-04:00
Introduce TargetInt to represent target's Int (#15973)
GHC was using host 'Int' in several places to represent values that
live in the target machine's 'Int' type. This is silently wrong when
cross-compiling from a 32-bit host to a 64-bit target: the host Int
is 32 bits while the target Int is 64 bits.
See Note [TargetInt] in GHC.Platform.
Also used the opportunity to make DynTag = Word8.
Fixes #15973
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
-
d419e972
by Luite Stegeman at 2026-04-13T15:16:04-04:00
Suppress desugaring warnings in the pattern match checker
Avoid duplicating warnings from the actual desugaring pass.
fixes #25996
-
c5b80dd0
by Phil de Joux at 2026-04-13T15:16:51-04:00
Typo ~/ghc/arch-os-version/environments
-
71462fff
by Luite Stegeman at 2026-04-13T15:17:38-04:00
add changelog entry for #26233
-
d1ddfd4b
by Rodrigo Mesquita at 2026-04-14T18:41:12-04:00
Add test for #25636
The existing test behaviour of "T23146_liftedeq" changed because the
simplifier now does a bit more inlining. We can restore the previous bad
behavior by using an OPAQUE pragma.
This test doubles as a test for #25636 when run in ghci, so we add it as
such.
-
b9df40ee
by Rodrigo Mesquita at 2026-04-14T18:41:12-04:00
refactor: protoBCOName is always a Name
Simplifies the code by removing the unnecessary type argument to
ProtoBCO which was always 'Name'
-
5c2a179e
by Rodrigo Mesquita at 2026-04-14T18:41:12-04:00
Allocate static constructors for bytecode
This commit adds support for static constructors when compiling and
linking ByteCode objects.
Top-level StgRhsCon get lowered to ProtoStaticCons rather than to
ProtoBCOs. A ProtoStaticCon gets allocated directly as a data con
application on the heap (using the new primop newConApp#).
Previously, we would allocate a ProtoBCO which, when evaluated, would
PACK and return the constructor.
A few more details are given in Note [Static constructors in Bytecode].
Secondly, this commit also fixes issue #25636 which was caused by
linking *unlifted* constructors in BCO instructions as
- (1) a thunk indexing the array of BCOs in a module
- (2) which evaluated to a BCO which still had to be evaluated to
return the unlifted constructor proper.
The (2) issue has been resolved by allocating the static constructors
directly. The (1) issue can be resolved by ensuring that we allocate all
unlifted top-level constructors eagerly, and leave the knot-tying for
the lifted BCOs and top-level constructors only.
The top-level unlifted constructors are never mutually recursive, so we
can allocate them all in one go as long as we do it in topological
order. Lifted fields of unlifted constructors can still be filled by the
knot-tied lifted variables since in those fields it is fine to keep
those thunks. See Note [Tying the knot in createBCOs] for more details.
Fixes #25636
-------------------------
Metric Decrease:
LinkableUsage01
-------------------------
-
cde47053
by Rodrigo Mesquita at 2026-04-14T18:41:12-04:00
Revert "StgToByteCode: Assert that PUSH_G'd values are lifted"
This reverts commit ec26c54d818e0cd328276196930313f66b780905.
Ever since f7a22c0f4e9ae0dc767115d4c53fddbd8372b777, we now do support
and will link top-level unlifted constructors into evaluated and
properly tagged values which we can reference with PUSH_G.
This assertion is no longer true and triggered a failure in T25636
-
c7a7e5b8
by Rodrigo Mesquita at 2026-04-14T18:41:12-04:00
refactor: Tag more remote Ptrs as RemotePtr
Pure refactor which improves the API of
- GHC.ByteCode.Linker
- GHC.Runtime.Interpreter
- GHC.Runtime.Interpreter.Types.SymbolCache
by using `RemotePtr` for more functions which used to return `Ptr`s that
could potentially be in a foreign process. E.g. `lookupIE`,
`lookupStaticPtr`, etc...
-
fc59494c
by Rodrigo Mesquita at 2026-04-14T18:41:12-04:00
Add float# and subword tests for #25636
These tests cover that static constructors in bytecode work correctly
for Float# and subword values (Word8#, Word16#)
-
477f521b
by Rodrigo Mesquita at 2026-04-14T18:41:12-04:00
test: Validate topoSort logic in createBCOs
This test validates that the topological sorting and ordering of the
unlifted constructors and lifted constructors in `createBCOs` is
correct.
See `Note [Tying the knot in createBCOs]` for why tying the knot for the
created BCOs is slightly difficult and why the topological sorting is
necessary.
This test fails when `let topoSortedObjs = topSortObjs objs` is
substituted by `let topoSortedObjs = zip [0..] objs`, thus witnessing
the toposort logic is correct and necessary.
The test calls the ghci `createBCOs` directly because it is currently
impossible to construct in Source Haskell a situation where a top-level
static unlifted constructor depends on another (we don't have top-level
unlifted constructors except for nullary constructors like `Leaf ::
(UTree :: UnliftedType)`).
This is another test for fix for #25636
-
2d9c30be
by Simon Jakobi at 2026-04-14T18:42:00-04:00
Improve tests for `elem`
...in order to simplify the work on #27096.
* Improve T17752 by including the Core output in golden files, checking
both -O1 and -O2.
* Add tests for fusion and no-fusion cases.
Fixes #27101.
-
2dadf3b0
by sheaf at 2026-04-16T13:28:39-04:00
Simplify mkTick
This commit simplifies 'GHC.Core.Utils.mkTick', removing the
accumulating parameter 'rest' which was suspiciously treating a bunch of
different ticks as a group, and moving the group as a whole around the
AST, ignoring that the ticks in the group might have different placement
properties.
The most important change is that we revert the logic (added in 85b0aae2)
that allowed ticks to be placed around coercions, which caused serious
issues (e.g. #27121). It was just a mistake, as it doesn't make sense
to put a tick around a coercion.
Also adds Note [Pushing SCCs inwards] which clarifies the logic for
pushing SCCs into lambdas, constructor applications, and dropping SCCs
around non-function variables (in particular the treatment of splittable
ticks).
A few other changes are also implemented:
- simplify 'can_split' predicate (no functional change)
- combine profiling ticks into one when possible
Fixes #26878, #26941 and #27121
Co-authored-by: simonpj <simon.peytonjones@gmail.com>
-
a0d6f1f4
by Simon Jakobi at 2026-04-16T13:29:28-04:00
Add regression test for #9074
Closes #9074.
-
d178ee89
by Sylvain Henry at 2026-04-16T13:30:25-04:00
Add changelog for #15973
-
e8a196c6
by sheaf at 2026-04-16T13:31:19-04:00
Deal with 'noSpec' in 'coreExprToPmLit'
This commit makes two separate changes relating to
'GHC.HsToCore.Pmc.Solver.Types.coreExprAsPmLit':
1. Commit 7124e4ad mistakenly marked deferred errors as non-canonical,
which led to the introduction of 'nospec' wrappers in the
generated Core. This reverts that accident by declaring deferred
errors as being canonical, avoiding spurious 'nospec' wrapping.
2. Look through magic identity-like Ids such as 'nospec', 'inline' and
'lazy' in 'coreExprAsPmLit', just like Core Prep does.
There might genuinely be incoherent evidence, but that shouldn't
obstruct the pattern match checker. See test T27124a.
Fixes #25926 #27124
-------------------------
Metric Decrease:
T3294
-------------------------
-
8cb99552
by Sylvain Henry at 2026-04-16T19:22:43-04:00
hadrian: warn when package index is missing (#16484)
Since cabal-install 3.0 we can query the path of remote-repo-cache and
check if hackage package index is present.
Fixes #16484
-
d6ce7477
by Richard Eisenberg at 2026-04-16T19:23:25-04:00
Teach hadrian to --skip-test.
Fixes #27188.
This adds the --skip-test flag to `hadrian build`, as documented in the
patch.
-
7666f4a9
by Fendor at 2026-04-17T22:29:51-04:00
Migrate `ghc-pkg` to use `OsPath` and `file-io`
`ghc-pkg` should use UNC paths as much as possible to avoid MAX_PATH
issues on windows.
`file-io` uses UNC Paths by default on windows, ensuring we use the
correct APIs and that we finally are no longer plagued by MAX_PATH
issues in CI and private machines.
On top of it, the higher correctness of `OsPath` is appreciated in this
small codebase. Also, we improve memory usage very slightly, due to the
more efficient memory representation of `OsPath` over `FilePath`
Adds `ghc-pkg` regression test for MAX_PATH on windows
Make sure `ghc-pkg` behaves as expected when long paths (> 255) are
involved on windows.
Let's generate a testcase where we can actually observe that `ghc-pkg`
behaves as epxected.
See the documentation for windows on Maximum Path Length Limitation:
* `https://learn.microsoft.com/en-us/windows/win32/fileio/maximum-file-path-limitation`
Adds changelog entry for long path support in ghc-pkg.
-
78434e8c
by Simon Peyton Jones at 2026-04-17T22:30:38-04:00
Kill off the substitution in Lint
Now that we have invariant (NoTypeShadowing) we no longer
need Lint to carry an ambient substitution. This makes it
simpler and faster. A really worthwhile refactor.
There are some knock-on effects
* Linting join points after worker/wrapper. See
Note [Join points and beta redexes]
* Running a type substitution after the desugarer.
See Note [Substituting type-lets] in
the new module GHC.Core.SubstTypeLets
Implements #27078
Most perf tests don't use Lint so we won't see a perf incresae.
But T1969, which uses -O0 and Lint, gets 1.3% worse because it has
to run the SubstTypeLets pass which is a somewhat expensive no-op
Overall though compile-time allocations are down 0.1%.
Metric Increase:
T1969
-
86ca6c2c
by mangoiv at 2026-04-17T22:31:22-04:00
testsuite: inline elemCoreTest
Some weird (probably python scoping) rule caused elemCoreTest, a regex
being out of scope on ubuntu, presumably because of a newer python version.
This patch just inlines the regex, which fixes the issue.
Fixes #27193
-
72d6dc74
by aparker at 2026-04-20T20:15:44-04:00
NCG: Implement constant folding for vector simd ops (Issue #25030)
-
b9cab907
by sheaf at 2026-04-20T20:15:44-04:00
Mark some SIMD tests as broken on i386 optllvm
As seen in #25498, several SIMD tests are broken on i386 in the optllvm
way. This commit marks them as "expect_broken".
-
76528cc3
by Wolfgang Jeltsch at 2026-04-20T20:16:25-04:00
Move most of the `System.IO` implementation into `base`
This involves a rewrite of the `combine` helper function to avoid the
use of `last`, which would now be flagged as an error.
Metric Decrease:
LinkableUsage01
T3294
Metric Increase:
T12227
T12707
T5642
-
04d143c0
by Luite Stegeman at 2026-04-21T14:05:33-04:00
rts: add a few missing i386 relocations in the rts linker
-
014087e7
by Luite Stegeman at 2026-04-21T14:05:34-04:00
CodeOutput: Fix finalizers on multiple platforms
- ELF platforms: emit .fini_array section
- wasm32/Darwin: emit initializer with __cxa_atexit call
- Windows: use -Wl,--whole-archive to prevent dropping finalizer symbols
- rts linker: fix crash/assertion failure unloading objects with finalizers
fixes #27072
-
915bba6f
by Simon Jakobi at 2026-04-21T14:06:16-04:00
Add regression test for #10531
Closes #10531.
-
86a646a6
by Andreas Klebinger at 2026-04-22T13:00:05-04:00
Revert use of generic instances for compiler time perf reasons.
Revert "Derive Semigroup/Monoid for instances believed could be derived in #25871"
This reverts commit 11a04cbb221cc404fe00d65d7c951558ede4caa9.
Revert "add Ghc.Data.Pair deriving"
This reverts commit 15d9ce449e1be8c01b89fd39bdf1e700ea7d1dce.
-
bc9ee1cf
by Wen Kokke at 2026-04-22T13:00:51-04:00
hadrian: Fix docs to remove static flavour
In 638f6548, the static flavour was turned into into the fully_static
flavour transformer. However, this commit did not update flavours.md.
-
cc9cc6d5
by Cheng Shao at 2026-04-23T09:40:46+00:00
configure: bump LlvmMaxVersion to 23
This patch bumps `LlvmMaxVersion` to 23 to support LLVM 22.x releases.
-
2ea7ef8e
by Cheng Shao at 2026-04-23T09:46:26+00:00
changelog: add llvm 22.x support
-
5574ee10
by Cheng Shao at 2026-04-24T08:24:30-04:00
compiler: avoid unused temporary `appendFS` operands
This patch fixes unused temporary `appendFS` operands in the codebase
that are retained in the `FastString` table after concatenation.
Rewrite rules are added so that if an operand is
`fsLit`/`mkFastString`, the `appendFS` application is rewritten to
append the `ShortByteString` operands first. The patch also fixes
`sconcat` behavior to align with `mconcat` for the same reason. Fixes #27205.
-
4ed78760
by mangoiv at 2026-04-24T08:25:13-04:00
contributing: adjust MR template to be less verbose
- MR template only shows text that is relevant for submissiong
- MR template was rewritten so it's readable from a user's and reviewer's
perspective
Resolves #27165
Co-Authored-By: @sheaf
-
87db83e2
by Cheng Shao at 2026-04-24T14:37:21-04:00
ci: bump freebsd boot ghc to 9.10.3
This commit bumps freebsd boot ghc to 9.10.3 to align with other
platforms and prevent outdated boot libs in boot ghc to block the
freebsd job.
-
17e3a0b7
by Cheng Shao at 2026-04-24T14:37:21-04:00
compiler: improve Binary instance of Array
This patch improves the `Binary` instance of `Array`:
- We no longer allocate intermediate lists. When serializing an
`Array`, we iterate over the elements directly; when deserializing
it, we allocate the result `Array` and fill it in a loop.
- Now we only serialize the array bounds tuple; the length field is
not needed.
Closes #27109.
-
2d30f7d3
by sheaf at 2026-04-24T14:38:23-04:00
Vendor mini-QuickCheck for testsuite
This commit extracts the vendored QuickCheck implementation from the
foundation testsuite to make it more broadly available in the GHC
testsuite, and makes use of it in the simd006 test (which also used
a vendored QuickCheck implementation).
On the way, we update the linear congruential generator to avoid the
shortcoming of only generating 31 bit large numbers.
Fixes #25990 and #25969.
-
dba5c7c1
by Duncan Coutts at 2026-04-27T13:00:39+01:00
Make cmm 'import "package" name;' syntax use consistent label types
There is a little-used syntactic form in cmm imports:
import "package" foo;
Which means to import foo from the given package (unit id, specified as
a string). This syntax is somewhat reminiscent of GHC's package import
extension.
This syntax form is not used in the rts cmm code, nor any of the boot
libraries. It may not be used at all. Unclear.
Change the kind of CLabel this syntax generates to be consistent with
the others. The other cmm imports use ForeignLabel with
ForeignLabelInExternalPackage. For some reason this form was using
CmmLabel. Change that to also be ForeignLabel but with
ForeignLabelInPackage. This specifies a specific package, rather
than an unnamed external package.
-
73b665ba
by Duncan Coutts at 2026-04-27T13:00:39+01:00
Change default cmm import statements to be internal
Previously a cmm statement like:
import foo;
meant to expect the symbol from a different shared library than the
current one.
Now it means to expect the symbol from the same shared library as the
current one. We'll add explicit syntax to indicate that it's a foreign
import. Most existing uses are in fact intenal (rts to rts), so few
imports will need to be annotated foreign. Examples would include cmm
code in libraries (other than the rts) that need to access RTS APIs.
In practice, this makes no difference whatsoever at the moment on any
platform other than windows (where building Haskell libs as shared libs
does not fully work yet), since the 'labelDynamic' treats all such
labels as foreign, irrespective of the foreign label source.
-
9a10fcb7
by Duncan Coutts at 2026-04-27T13:00:39+01:00
Add cmm import syntax 'import DATA foo;' as better name for CLOSURE
The existing syntax is:
import CLOSURE foo;
The new syntax is
import DATA foo;
This means to interpret the symbol foo as refering to data (i.e. a
global constant or variable) rather than to code (a function). The
historical syntax for this uses CLOSURE, which is rather misleading.
Presumably this was done to avoid introducing new reserved words.
Be less squemish about new reserved words and add DATA and use that.
Keep the existing CLOSURE syntax as an alias for compatibility.
-
aaff9414
by Duncan Coutts at 2026-04-27T13:00:40+01:00
Add cmm 'import extern name;' syntax
Since the default for cmm imports is now for symbols within the same
shared object, we need a way to indicate we want a symbol from an
external shared object:
import extern foo; -- for a function
import extern DATA foo; -- for data
This adds a new reserved word 'extern'.
We don't expect to have to use this much. Most cmm imports are
intra-DSO.
This makes no difference currently on ELF and MachO platforms, but does
make a difference to the linking conventions on PE (Windows).
In future it's plausible we could take make distinctions on ELF or
MachO, so it's worth trying to get it right. Windows can be the guinea
pig.
-
0d1e9296
by Duncan Coutts at 2026-04-27T13:00:40+01:00
Add cmm syntax 'import "package" DATA foo;' for completeness
We already have:
import DATA foo; -- for data imports
import "package" foo; -- for imports from a given unitid
There's no reason not to have both at once:
import "package" DATA foo;
So add that.
-
67950a03
by Duncan Coutts at 2026-04-27T13:00:40+01:00
Improve the commentary for the cmm import grammar.
AFAIK, this is the only place where GHC-style Cmm syntax is documented.
-
9eb3b377
by Duncan Coutts at 2026-04-27T13:16:31+01:00
Add a changelog.d entry for the .cmm import syntax changes