-
6c78de2d
by Sylvain Henry at 2025-09-01T08:46:19-04:00
Driver: substitute virtual Prim module in --make mode too
When we build ghc-internal with --make (e.g. with cabal-install), we
need to be careful to substitute the virtual interface file for
GHC.Internal.Prim:
- after code generation (we generate code for an empty module, so we get
an empty interface)
- when we try to reload its .hi file
-
26e0db16
by fendor at 2025-09-01T08:47:01-04:00
Expose Stack Annotation frames in IPE backtraces by default
When decoding the Haskell-native call stack and displaying the IPE information
for the stack frames, we print the `StackAnnotation` of the `AnnFrame` by default.
This means, when an exception is thrown, any intermediate stack annotations will
be displayed in the `IPE Backtrace`.
Example backtrace:
```
Exception: ghc-internal:GHC.Internal.Exception.ErrorCall:
Oh no!
IPE backtrace:
annotateCallStackIO, called at app/Main.hs:48:10 in backtrace-0.1.0.0-inplace-server:Main
annotateCallStackIO, called at app/Main.hs:46:13 in backtrace-0.1.0.0-inplace-server:Main
Main.handler (app/Main.hs:(46,1)-(49,30))
Main.liftIO (src/Servant/Server/Internal/Handler.hs:30:36-42)
Servant.Server.Internal.Delayed.runHandler' (src/Servant/Server/Internal/Handler.hs:27:31-41)
Control.Monad.Trans.Resource.runResourceT (./Control/Monad/Trans/Resource.hs:(192,14)-(197,18))
Network.Wai.Handler.Warp.HTTP1.processRequest (./Network/Wai/Handler/Warp/HTTP1.hs:195:20-22)
Network.Wai.Handler.Warp.HTTP1.processRequest (./Network/Wai/Handler/Warp/HTTP1.hs:(195,5)-(203,31))
Network.Wai.Handler.Warp.HTTP1.http1server.loop (./Network/Wai/Handler/Warp/HTTP1.hs:(141,9)-(157,42))
HasCallStack backtrace:
error, called at app/Main.hs:48:32 in backtrace-0.1.0.0-inplace-server:Main
```
The first two entries have been added by `annotateCallStackIO`, defined in `annotateCallStackIO`.
-
a1567efd
by Sylvain Henry at 2025-09-01T23:01:35-04:00
RTS: rely less on Hadrian for flag setting (#25843)
Hadrian used to pass -Dfoo command-line flags directly to build the rts.
We can replace most of these flags with CPP based on cabal flags.
It makes building boot libraries with cabal-install simpler (cf #25843).
-
ca5b0283
by Sergey Vinokurov at 2025-09-01T23:02:23-04:00
Remove unnecessary irrefutable patterns from Bifunctor instances for tuples
Implementation of https://github.com/haskell/core-libraries-committee/issues/339
Metric Decrease:
mhu-perf
-
2da84b7a
by sheaf at 2025-09-01T23:03:23-04:00
Only use active rules when simplifying rule RHSs
When we are simplifying the RHS of a rule, we make sure to only apply
rewrites from rules that are active throughout the original rule's
range of active phases.
For example, if a rule is always active, we only fire rules that are
themselves always active when simplifying the RHS. Ditto for inline
activations.
This is achieved by setting the simplifier phase to a range of phases,
using the new SimplPhaseRange constructor. Then:
1. When simplifying the RHS of a rule, or of a stable unfolding,
we set the simplifier phase to a range of phases, computed from
the activation of the RULE/unfolding activation, using the
function 'phaseFromActivation'.
The details are explained in Note [What is active in the RHS of a RULE?]
in GHC.Core.Opt.Simplify.Utils.
2. The activation check for other rules and inlinings is then:
does the activation of the other rule/inlining cover the whole
phase range set in sm_phase? This continues to use the 'isActive'
function, which now accounts for phase ranges.
On the way, this commit also moves the exact-print SourceText annotation
from the Activation datatype to the ActivationAnn type. This keeps the
main Activation datatype free of any extra cruft.
Fixes #26323
-
79816cc4
by Rodrigo Mesquita at 2025-09-02T12:19:59-04:00
cleanup: Move dehydrateCgBreakInfo to Stg2Bc
This no longer has anything to do with Core.
-
53da94ff
by Rodrigo Mesquita at 2025-09-02T12:19:59-04:00
rts/Disassembler: Fix spacing of BRK_FUN
-
08c0cf85
by Rodrigo Mesquita at 2025-09-02T12:19:59-04:00
debugger: Fix bciPtr in Step-out
We need to use `BCO_NEXT` to move bciPtr to ix=1, because ix=0 points to
the instruction itself!
I do not understand how this didn't crash before.
-
e7e021fa
by Rodrigo Mesquita at 2025-09-02T12:19:59-04:00
debugger: Allow BRK_FUNs to head case continuation BCOs
When we start executing a BCO, we may want to yield to the scheduler:
this may be triggered by a heap/stack check, context switch, or a
breakpoint. To yield, we need to put the stack in a state such that
when execution is resumed we are back to where we yielded from.
Previously, a BKR_FUN could only head a function BCO because we only
knew how to construct a valid stack for yielding from one -- simply add
`apply_interp_info` + the BCO to resume executing. This is valid because
the stack at the start of run_BCO is headed by that BCO's arguments.
However, in case continuation BCOs (as per Note [Case continuation BCOs]),
we couldn't easily reconstruct a valid stack that could be resumed
because we dropped too soon the stack frames regarding the value
returned (stg_ret) and received (stg_ctoi) by that continuation.
This is especially tricky because of the variable type and size return
frames (e.g. pointer ret_p/ctoi_R1p vs a tuple ret_t/ctoi_t2).
The trick to being able to yield from a BRK_FUN at the start of a case
cont BCO is to stop removing the ret frame headers eagerly and instead
keep them until the BCO starts executing. The new layout at the start of
a case cont. BCO is described by the new Note [Stack layout when entering run_BCO].
Now, we keep the ret_* and ctoi_* frames when entering run_BCO.
A BRK_FUN is then executed if found, and the stack is yielded as-is with
the preserved ret and ctoi frames.
Then, a case cont BCO's instructions always SLIDE off the headers of the
ret and ctoi frames, in StgToByteCode.doCase, turning a stack like
| .... |
+---------------+
| fv2 |
+---------------+
| fv1 |
+---------------+
| BCO |
+---------------+
| stg_ctoi_ret_ |
+---------------+
| retval |
+---------------+
| stg_ret_..... |
+---------------+
into
| .... |
+---------------+
| fv2 |
+---------------+
| fv1 |
+---------------+
| retval |
+---------------+
for the remainder of the BCO.
Moreover, this more uniform approach of keeping the ret and ctoi frames
means we need less ad-hoc logic concerning the variable size of
ret_tuple vs ret_p/np frames in the code generator and interpreter:
Always keep the return to cont. stack intact at the start of run_BCO,
and the statically generated instructions will take care of adjusting
it.
Unlocks BRK_FUNs at the start of case cont. BCOs which will enable a
better user-facing step-out (#26042) which is free of the bugs the
current BRK_ALTS implementation suffers from (namely, using BRK_FUN
rather than BRK_ALTS in a case cont. means we'll never accidentally end
up in a breakpoint "deeper" than the continuation, because we stop at
the case cont itself rather than on the first breakpoint we evaluate
after it).
-
ade3c1e6
by Rodrigo Mesquita at 2025-09-02T12:19:59-04:00
BRK_FUN with InternalBreakLocs for code-generation time breakpoints
At the start of a case continuation BCO, place a BRK_FUN.
This BRK_FUN uses the new "internal breakpoint location" -- allowing us
to come up with a valid source location for this breakpoint that is not associated with a source-level tick.
For case continuation BCOs, we use the last tick seen before it as the
source location. The reasoning is described in Note [Debugger: Stepout internal break locs].
Note how T26042c, which was broken because it displayed the incorrect
behavior of the previous step out when we'd end up at a deeper level
than the one from which we initiated step-out, is now fixed.
As of this commit, BRK_ALTS is now dead code and is thus dropped.
Note [Debugger: Stepout internal break locs]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Step-out tells the interpreter to run until the current function
returns to where it was called from, and stop there.
This is achieved by enabling the BRK_FUN found on the first RET_BCO
frame on the stack (See [Note Debugger: Step-out]).
Case continuation BCOs (which select an alternative branch) must
therefore be headed by a BRK_FUN. An example:
f x = case g x of <--- end up here
1 -> ...
2 -> ...
g y = ... <--- step out from here
- `g` will return a value to the case continuation BCO in `f`
- The case continuation BCO will receive the value returned from g
- Match on it and push the alternative continuation for that branch
- And then enter that alternative.
If we step-out of `g`, the first RET_BCO on the stack is the case
continuation of `f` -- execution should stop at its start, before
selecting an alternative. (One might ask, "why not enable the breakpoint
in the alternative instead?", because the alternative continuation is
only pushed to the stack *after* it is selected by the case cont. BCO)
However, the case cont. BCO is not associated with any source-level
tick, it is merely the glue code which selects alternatives which do
have source level ticks. Therefore, we have to come up at code
generation time with a breakpoint location ('InternalBreakLoc') to
display to the user when it is stopped there.
Our solution is to use the last tick seen just before reaching the case
continuation. This is robust because a case continuation will thus
always have a relevant breakpoint location:
- The source location will be the last source-relevant expression
executed before the continuation is pushed
- So the source location will point to the thing you've just stepped
out of
- Doing :step-local from there will put you on the selected
alternative (which at the source level may also be the e.g. next
line in a do-block)
Examples, using angle brackets (<<...>>) to denote the breakpoint span:
f x = case <<g x>> {- step in here -} of
1 -> ...
2 -> ...>
g y = <<...>> <--- step out from here
...
f x = <<case g x of <--- end up here, whole case highlighted
1 -> ...
2 -> ...>>
doing :step-local ...
f x = case g x of
1 -> <<...>> <--- stop in the alternative
2 -> ...
A second example based on T26042d2, where the source is a do-block IO
action, optimised to a chain of `case expressions`.
main = do
putStrLn "hello1"
<<f>> <--- step-in here
putStrLn "hello3"
putStrLn "hello4"
f = do
<<putStrLn "hello2.1">> <--- step-out from here
putStrLn "hello2.2"
...
main = do
putStrLn "hello1"
<<f>> <--- end up here again, the previously executed expression
putStrLn "hello3"
putStrLn "hello4"
doing step/step-local ...
main = do
putStrLn "hello1"
f
<<putStrLn "hello3">> <--- straight to the next line
putStrLn "hello4"
Finishes #26042
-
c66910c0
by Rodrigo Mesquita at 2025-09-02T12:19:59-04:00
debugger: Re-use the last BreakpointId whole in step-out
Previously, to come up with a location to stop at for `:stepout`, we
would store the location of the last BreakpointId surrounding the
continuation, as described by Note [Debugger: Stepout internal break locs].
However, re-using just the location from the last source breakpoint
isn't sufficient to provide the necessary information in the break
location. Specifically, it wouldn't bind any variables at that location.
Really, there is no reason not to re-use the last breakpoint wholesale,
and re-use all the information we had there. Step-out should behave just
as if we had stopped at the call, but s.t. continuing will not
re-execute the call.
This commit updates the CgBreakInfo to always store a BreakpointId, be
it the original one or the one we're emulating (for step-out).
It makes variable bindings on :stepout work
-
e4abed7b
by sheaf at 2025-09-02T12:20:40-04:00
Revert accidental changes to hie.yaml
-
003b715b
by meooow25 at 2025-09-02T23:48:51+02:00
Adjust the strictness of Data.List.iterate'
* Don't force the next element in advance when generating a (:).
* Force the first element to WHNF like every other element.
Now every element in the output list is forced to WHNF when the (:)
containing it is forced.
CLC proposal:
https://github.com/haskell/core-libraries-committee/issues/335
-
b2f6aad0
by Simon Hengel at 2025-09-03T04:36:10-04:00
Refactoring: More consistently use logOutput, logInfo, fatalErrorMsg
-
60a16db7
by Rodrigo Mesquita at 2025-09-03T10:55:50+01:00
bytecode: Don't PUSH_L 0; SLIDE 1 1
While looking through bytecode I noticed a quite common unfortunate
pattern:
...
PUSH_L 0
SLIDE 1 1
We do this often by generically constructing a tail call from a function
atom that may be somewhere arbitrary on the stack.
However, for the special case that the function can be found directly on
top of the stack, as part of the arguments, it's plain redundant to push
then slide it.
In this commit we add a small optimisation to the generation of
tailcalls in bytecode. Simply: lookahead for the function in the stack.
If it is the first thing on the stack and it is part of the arguments
which would be dropped as we entered the tail call, then don't push then
slide it.
In a simple example (T26042b), this already produced a drastic
improvement in generated code (left is old, right is with this patch):
```diff
3c3
< 2025-07-29 10:14:02.081277 UTC
---
> 2025-07-29 10:50:36.560949 UTC
160,161c160
< PUSH_L 0
< SLIDE 1 2
---
> SLIDE 1 1
164,165d162
< PUSH_L 0
< SLIDE 1 1
175,176c172
< PUSH_L 0
< SLIDE 1 2
---
> SLIDE 1 1
179,180d174
< PUSH_L 0
< SLIDE 1 1
206,207d199
< PUSH_L 0
< SLIDE 1 1
210,211d201
< PUSH_L 0
< SLIDE 1 1
214,215d203
< PUSH_L 0
< SLIDE 1 1
218,219d205
< PUSH_L 0
< SLIDE 1 1
222,223d207
< PUSH_L 0
< SLIDE 1 1
...
600,601c566
< PUSH_L 0
< SLIDE 1 2
---
> SLIDE 1 1
604,605d568
< PUSH_L 0
< SLIDE 1 1
632,633d594
< PUSH_L 0
< SLIDE 1 1
636,637d596
< PUSH_L 0
< SLIDE 1 1
640,641d598
< PUSH_L 0
< SLIDE 1 1
644,645d600
< PUSH_L 0
< SLIDE 1 1
648,649d602
< PUSH_L 0
< SLIDE 1 1
652,653d604
< PUSH_L 0
< SLIDE 1 1
656,657d606
< PUSH_L 0
< SLIDE 1 1
660,661d608
< PUSH_L 0
< SLIDE 1 1
664,665d610
< PUSH_L 0
< SLIDE 1 1
```
I also compiled lib:Cabal to bytecode and counted the number of bytecode
lines with `find dist-newstyle -name "*.dump-BCOs" -exec wc {} +`:
with unoptimized core:
1190689 lines (before) - 1172891 lines (now)
= 17798 less redundant instructions (-1.5% lines)
with optimized core:
1924818 lines (before) - 1864836 lines (now)
= 59982 less redundant instructions (-3.1% lines)
-
8b2c72c0
by L0neGamer at 2025-09-04T06:32:03-04:00
Add Control.Monad.thenM and Control.Applicative.thenA
-
39e1b7cb
by Teo Camarasu at 2025-09-04T06:32:46-04:00
ghc-internal: invert dependency of GHC.Internal.TH.Syntax on Data.Data
This means that Data.Data no longer blocks building TH.Syntax, which
allows greater parallelism in our builds.
We move the Data.Data.Data instances to Data.Data. Quasi depends on
Data.Data for one of its methods, so,
we split the Quasi/Q, etc definition out of GHC.Internal.TH.Syntax
into its own module. This has the added benefit of splitting up this
quite large module.
Previously TH.Syntax was a bottleneck when compiling ghc-internal. Now
it is less of a bottle-neck and is also slightly quicker to
compile (since it no longer contains these instances) at the cost of
making Data.Data slightly more expensive to compile.
TH.Lift which depends on TH.Syntax can also compile quicker and no
longer blocks ghc-internal finishing to compile.
Resolves #26217
-------------------------
Metric Decrease:
MultiLayerModulesTH_OneShot
T13253
T21839c
T24471
Metric Increase:
T12227
-------------------------
-
bdf82fd2
by Teo Camarasu at 2025-09-04T06:32:46-04:00
compiler: delete unused names in Builtins.Names.TH
returnQ and bindQ are no longer used in the compiler.
There was also a very old comment that referred to them that I have modernized
-
41a448e5
by Ben Gamari at 2025-09-04T19:21:43-04:00
hadrian: Pass lib & include directories to ghc `Setup configure`
-
46bb9a79
by Ben Gamari at 2025-09-04T19:21:44-04:00
rts/IPE: Fix compilation when zstd is enabled
This was broken by the refactoring undertaken in
c80dd91c0bf6ac034f0c592f16c548b9408a8481.
Closes #26312.
-
138a6e34
by sheaf at 2025-09-04T19:22:46-04:00
Make mkCast assertion a bit clearer
This commit changes the assertion message that gets printed when one
calls mkCast with a coercion whose kind does not match the type of the
inner expression. I always found the assertion message a bit confusing,
as it didn't clearly state what exactly was the error.
-
9d626be1
by sheaf at 2025-09-04T19:22:46-04:00
Simplifier/rules: fix mistakes in Notes & comments
-
94b62aa7
by Simon Peyton Jones at 2025-09-08T03:37:14-04:00
Refactor ForAllCo
This is a pure refactor, addressing #26389.
It arranges that the kind coercion in a ForAllCo is a MCoercion, rather
than a plain Coercion, thus removing redundancy in the common case.
See (FC8) in Note [ForAllCo]
It's a nice cleanup.
-
624afa4a
by sheaf at 2025-09-08T03:38:05-04:00
Use tcMkScaledFunTys in matchExpectedFunTys
We should use tcMkScaledFunTys rather than mkScaledFunTys in
GHC.Tc.Utils.Unify.matchExpectedFunTys, as the latter crashes
when the kind of the result type is a bare metavariable.
We know the result is always Type-like, so we don't need scaledFunTys
to try to rediscover that from the kind.
Fixes #26277
-
0975d2b6
by sheaf at 2025-09-08T03:38:54-04:00
Revert "Remove hptAllFamInstances usage during upsweep"
This reverts commit 3bf6720eff5e86e673568e756161e6d6150eb440.
-
0cf34176
by soulomoon at 2025-09-08T03:38:54-04:00
Family consistency checks: add test for #26154
This commit adds the test T26154, to make sure that GHC doesn't crash
when performing type family consistency checks. This test case
was extracted from Agda.
Fixes #26154
-
ba210d98
by Simon Peyton Jones at 2025-09-08T16:26:36+01:00
Report solid equality errors before custom errors
This MR fixes #26255 by
* Reporting solid equality errors like
Int ~ Bool
before "custom type errors". See comments in `report1` in
`reportWanteds`
* Suppressing errors that arise from superclasses of
Wanteds. See (SCE1) in Note [Suppressing confusing errors]
More details in #26255.
-
b6249140
by Simon Peyton Jones at 2025-09-10T10:42:38-04:00
Fix a scoping error in Specialise
This small patch fixes #26329, which triggered a scoping error.
Test is in T21391, with -fpolymorphic-specialisation enabled
-
45305ab8
by sheaf at 2025-09-10T10:43:29-04:00
Make rationalTo{Float,Double} inline in phase 0
We hold off on inlining these until phase 0 to allow constant-folding
rules to fire. However, once we get to phase 0, we should inline them,
e.g. to expose unboxing opportunities.
See CLC proposal #356.
-
0959d4bc
by Andreas Klebinger at 2025-09-10T10:44:12-04:00
Add regression test for #26056
-
dc79593d
by sheaf at 2025-09-10T10:45:01-04:00
Deep subsumption: unify mults without tcEqMult
As seen in #26332, we may well end up with a non-reflexive multiplicity
coercion when doing deep subsumption. We should do the same thing that
we do without deep subsumption: unify the multiplicities normally,
without requiring that the coercion is reflexive (which is what
'tcEqMult' was doing).
Fixes #26332
-
4bfe2269
by sheaf at 2025-09-10T10:45:50-04:00
lint-codes: fixup MSYS drive letter on Windows
This change ensures that System.Directory.listDirectory doesn't trip up
on an MSYS-style path like '/c/Foo' when trying to list all testsuite
stdout/stderr files as required for testing coverage of GHC diagnostic
codes in the testsuite.
Fixes #25178
-
56540775
by Ben Gamari at 2025-09-10T10:46:32-04:00
gitlab-ci: Disable split sections on FreeBSD
Due to #26303.
-
1537784b
by Moritz Angermann at 2025-09-10T10:47:13-04:00
Improve mach-o relocation information
This change adds more information about the symbol and addresses
we try to relocate in the linker. This significantly helps when
deubbging relocation issues reported by users.
-
4e67855b
by Moritz Angermann at 2025-09-10T10:47:54-04:00
test.mk expect GhcLeadingUnderscore, not LeadingUnderscore (in line with the other Ghc prefixed variables.
-
c1cdd265
by Moritz Angermann at 2025-09-10T10:48:35-04:00
testsuite: Fix broken exec_signals_child.c
There is no signal 0. The signal mask is 1-32.
-
99ac335c
by Moritz Angermann at 2025-09-10T10:49:15-04:00
testsuite: clarify Windows/Darwin locale rationale for skipping T6037 T2507 T8959a
-
0e8fa77a
by Moritz Angermann at 2025-09-10T10:49:56-04:00
Skip broken tests on macOS (due to leading underscore not handled properly in the expected output.)
-
28570c59
by Zubin Duggal at 2025-09-10T10:50:37-04:00
docs(sphinx): fix links to reverse flags when using the :ghc-flag:`-fno-<flag>` syntax
This solution is rather hacky and I suspect there is a better way to do this but I don't know
enough about Sphinx to do better.
Fixes #26352
-
0f75c199
by Luite Stegeman at 2025-09-11T12:37:18+02:00
Support larger unboxed sums
Change known constructor encoding for sums in interfaces to use
11 bits for both the arity and the alternative (up from 8 and 6,
respectively)
-
fb8bb8fe
by Luite Stegeman at 2025-09-11T12:37:18+02:00
Use slots smaller than word as tag for smaller unboxed sums
This packs unboxed sums more efficiently by allowing
Word8, Word16 and Word32 for the tag field if the number of
constructors is small enough