-
2ecabb4f
by Zubin Duggal at 2026-07-09T09:23:25-04:00
hadrian: binary-dist-dir should not be the default target
Revert behaviour to pre 23c9b6c392f52ec9d7a8618b204ff6b885f5fba2
In 23c9b6c392f52ec9d7a8618b204ff6b885f5fba2, we applied the following behaviour change:
```
hadrian: Build stage 2 cross compilers
...
* hadrian: Make binary-dist-dir the default build target. This allows us
to have the logic in one place about which libraries/stages to build
with cross compilers. Fixes #24192
```
This is a major regression to development experience, a plain hadrian/build
--freeze1 now takes ages because we rebuild all docs (which need to go in the
binary dist dir).
`binary-dist-dir` is the wrong default target for regular GHC development work
Fixes #27445
-
e16388e3
by Zubin Duggal at 2026-07-09T09:23:25-04:00
.gitignore: Add the hadrian system.config introduced by commit 23c9b6c392f52ec9d7a8618b204ff6b885f5fba2
Since
commit 23c9b6c392f52ec9d7a8618b204ff6b885f5fba2
Author: Matthew Pickering <matthewtpickering@gmail.com>
Date: Thu Dec 21 16:17:41 2023 +0000
hadrian: Build stage 2 cross compilers
./configure produces /hadrian/cfg/system.config.{host,target}
Add these to .gitignore
-
7e8abf41
by Alan Zimmerman at 2026-07-09T09:24:12-04:00
EPA: Replace AnnListItem with simply [TrailingAnn]
Remove the unnecessary wrapper around a single field.
-
29032f17
by Zubin Duggal at 2026-07-09T09:24:58-04:00
testsuite: Keep real reason for fragile test failures
-
c34e03a7
by Zubin Duggal at 2026-07-09T09:24:58-04:00
testsuite: Fall back to the failure reason for empty JUnit bodies
-
409d40f0
by Zubin Duggal at 2026-07-09T09:24:58-04:00
testsuite: Show output diffs in JUnit output
Also refactor compare_outputs to return essentially a `Maybe Diff`
(`CompareOutput`) instead of a bool, but more pythonic. This
allows us to pass the diff through nice.
-
06fee1ab
by Zubin Duggal at 2026-07-09T09:24:58-04:00
perf notes: include stat deviation and acceptance window in notes so they show up in gitlab
-
57c0f32c
by mangoiv at 2026-07-10T11:08:38-04:00
driver: enable -finter-module-far-jumps by default
this fixes a compatibility bug with certain binutils/gcc versions where
we were seeing jump offset overflow errors.
This commit can probably reverted if we stop supporting the problematic
binutils/gcc verions (2.44 and 14.2, respectively)
Reolves #26994
-
4396a6f2
by Andrea Vezzosi at 2026-07-10T11:09:25-04:00
[Fix #27287] preserve ModBreaks in ModIface
-
ed261a7e
by Cheng Shao at 2026-07-14T17:59:38-04:00
hadrian: fix HLS support
This patch fixes hadrian's HLS support so one can rely on HLS when
working on the hadrian codebase. Fixes #27480.
Not building/linking shared libraries for hadrian is a severely
premature optimization; this top-level setting in `cabal.project` only
affects home packages while the dependencies in the cabal store are
built with vanilla/dynamic anyway, and even adding dynamic builds to
home packages would not be costly due to cabal's usage of
`-dynamic-too`.
-
eee8ec5b
by Cheng Shao at 2026-07-14T18:00:20-04:00
compiler: fix miscompiled %load_relaxed, add missing %store_relaxed
This patch fixes the %load_relaxed cmm primop compilation logic to
correctly use relaxed memory ordering, and adds the missing
%store_relaxed primop. Parsing logic of %load/%store with explicit
ordering is covered in the AtomicFetch test case. Fixes #27483.
Co-authored-by: Codex <codex@openai.com>
-
1718230f
by Alan Zimmerman at 2026-07-14T18:01:06-04:00
EPA: Keep binds and sigs together in HsValBindsLR
We combine them into a single list for GhcPs, wrapped in the
ValBind data type, which is the bind equivalent of ValD, having
constructors for binds and sigs.
This simplifies exact print processing, especially when using it to
update the contents of local binds, as we no longer need AnnSortKey
BindTag
-
6bd1ad2a
by Andreas Klebinger at 2026-07-14T18:01:49-04:00
Bump nofib submodule to account for MonoLocalBinds.
New versions of GHC enable MonoLocalBinds by default.
This breaks some of the benchmarks. I've fixed this and
this bump pulls in that fix.
-
7eb0f1c9
by Cheng Shao at 2026-07-14T18:02:31-04:00
testsuite: fix bytecodeIPE test under +ipe flavours
This patch fixes the bytecodeIPE test under +ipe flavours. It used to
fail under +ipe because the RTS is built with IPE info, then
stg_AP_info in RTS carries IPE info, so whereFrom wouldn't return
Nothing. Now the test checks IPE info of a datacon in the ghci-loaded
module which is not affected by whether the RTS is built with IPE info
or not. Fixes #27498.
Co-authored-by: Codex <codex@openai.com>
-
ef038aae
by cydparser at 2026-07-15T04:35:41-04:00
Reduce bytes allocated for `capabilities` in RTS (fixes #27487)
In rts/Capability.c, `capabilities` is an array of pointers, but it was allocated as if it were an
array of Capability's.
-
d377e83e
by Cheng Shao at 2026-07-15T04:36:27-04:00
rts: fix missing UNTAG in stg_readTVarIOzh
This patch fixes missing UNTAG on the current value closure read from
StgTVar. UNTAG is a no-op when it's stg_TREC_HEADER_info which is word
aligned; it may be a tagged closure, and reading info table from the
tagged address is an unaligned load which may cause issues on
platforms with strict alignment requirements.
Co-authored-by: Codex <codex@openai.com>
-
8ed03842
by Cheng Shao at 2026-07-15T04:36:27-04:00
rts: fix missing UNTAG in stg_control0zh_ll
This patch fixes missing UNTAG on the cont closure returned by
captureContinuationAndAbort. In case it's not NULL,
captureContinuationAndAbort returns a tagged StgContinuation closure,
in which case it must be untagged before accessing the
apply_mask_frame field.
In the past it worked out of luck: when apply_mask_frame was NULL then
mask_frame_offset is also 0 so the control flow didn't diverge to a
wrong path. Still, this is horribly wrong and will crash once
StgContinuation struct is refactored and fields are shuffled around.
Co-authored-by: Codex <codex@openai.com>
-
5aa7000a
by Cheng Shao at 2026-07-15T04:37:08-04:00
compiler: fix redundant AP thunk codegen when not using -ticky-ap-thunk
This patch fixes a double negation confusion in !7525 that results in
some redundant AP thunk code generation when not using
-ticky-ap-thunk. Now, we use `stgToCmmUseStdApThunk` to indicate
whether precomputed AP thunks in the RTS should be used, which
defaults to `True`, unless `-ticky-ap-thunk` is passed.
`-finfo-table-map` now also implies `-ticky-ap-thunk`, since when
doing IPE profiling we want the generated AP thunks to be unique.
Fixes #27502.
-------------------------
Metric Decrease:
T3064
-------------------------
Co-authored-by: Codex <codex@openai.com>
-
d43a7b7a
by Brian McKenna at 2026-07-15T20:10:04+02:00
Strip ticks when desugaring bool guards
The special `considerAccessible` pattern was broken when compiling
with debug info. Compiling with debug info wraps expressions with
`SourceNote` ticks, which broke the internals of the
`desugarBoolGuard` function. Ticks are now ignored within this
function.
Fixes #27360
-
ede4b17b
by Ben Gamari at 2026-07-15T22:59:53-04:00
base: Display ExceptionContext in WhileHandling's textual description
As originally-implemented the implementation for
`WhileHandling(displayExceptionAnnotation)` would display the
`ExceptionContext` of the exception which it carries (as this was the
behavior of `displayException`, in terms of which
`displayExceptionAnnotation` was implemented).
However, in 284ffab3 the definition of `SomeException(displayException)`
was changed to exclude the `ExceptionContext`. This means that
`WhileHandling(displayExceptionAnnotation)` fails to describe the
provenance of the exception which it captures, greatly limiting its
utility.
Return the implementation to its originally-specified behavior by
implementing `WhileHandling(displayExceptionAnnotation)` in terms of
`displayExceptionWithInfo`.
Fixes #27456.
-
0f64f348
by Cheng Shao at 2026-07-16T15:41:08+00:00
ci: add missing docker permission workaround in abi-test job
-
660cb239
by Cheng Shao at 2026-07-16T19:37:48+00:00
bindist: Fix make install -j race condition on macos/freebsd
This patch fixes make install -j race condition on macos/freebsd. BSD
install fails with EEXIST when multiple install processes concurrently
create the same prefix directory. So we add an `install_dirs`
prerequisite job that sequentially creates the directories for
subsequent jobs to work with. Fixes #27499.
Co-authored-by: Codex <codex@openai.com>
-
08130257
by Cheng Shao at 2026-07-16T19:37:48+00:00
ci: run bindist make install with -j
This patch makes the ci scripts run `make install` with `-j` to reduce
wall clock time when installing the bindist, see related issue for
benchmark numbers. This only affects ghc ci logic, the user-facing
default is up to distributors and is still `-j1`. Closes #27029.
-
d5ae6906
by Adam Gundry at 2026-07-17T04:57:43-04:00
Mark various language extension flags as deprecated (see #27329)
The following language extensions are now deprecated:
- AlternativeLayoutRule
- AlternativeLayoutRuleTransitional
- ParallelArrays
- PolymorphicComponents
- Rank2Types
In addition, the warning `-Walternative-layout-rule-transitional`
has been marked as deprecated, as it is emitted only under the
deprecated extension `XAlternativeLayoutRuleTransitional`.
-
fe3b059c
by Andrew Lelechenko at 2026-07-17T04:58:26-04:00
base: re-export GHC.Environment.getFullArgs from System.Environment
CLC proposal https://github.com/haskell/core-libraries-committee/issues/431
-
722236dd
by sheaf at 2026-07-18T08:48:31-04:00
Coercion optimisation: avoid double-Sym for InstCo
Ticket #27374 pointed out an issue with GHC.Core.Coercion.Opt.optCoercion's
handling of InstCo: it contravened (LC2) in Note [The LiftingContext in optCoercion]
because it applied the ambient 'sym' to a coercion that was then added
to the lifting context substitution.
Fixes #27374
Co-authored-by: Simon Jakobi <simon.jakobi@gmail.com>
-
ff70fc75
by sheaf at 2026-07-18T08:48:31-04:00
Coercion optimisation: avoid exponential behaviour
The change to coercion optimisation of 'InstCo' in the previous commit
introduces exponential behaviour to the coercion optimiser. To avoid
this, this commit provides a way to push in 'Sym' of an already-optimised
coercion: GHC.Core.Coercion.Opt.mkDeepSymCo.
See Note [Pushing Sym without re-optimising] in GHC.Core.Coercion.Opt.
-
dfef27f0
by Duncan Coutts at 2026-07-18T08:49:12-04:00
Move THREADED_RTS-conditional struct members to end of Capability
Accessing members of the Capability struct from CMM code rely on
accessor macros. (The macros are generated by deriveConstants).
These macros have a single definition. This means that the offsets of
all struct members must *not* vary based on THREADED_RTS vs
!THREADED_RTS. This requires that any struct members that are
conditional on THREADED_RTS must occur after the unconditional struct
members. Hence we move all the ones that are conditional on
THREADED_RTS to the end.
Add a deriveConstants entry for the iomgr member of the Capability
struct, which was the motivation for this change.
Add warning messages to help our future selves. Debugging this took me
a couple hours in gdb!
-
c254e022
by Duncan Coutts at 2026-07-18T08:49:12-04:00
Make the IOManager API use CapIOManager rather than Capability
This makes the API somewhat more self-contained and more consistent.
Now the IOManager API and each of the backends takes just the I/O
manager structure. Previously we had a bit of a mixture, depending on
whether the function needed access to the Capability or just the
CapIOManager.
We still need access to the cap, so we introduce a back reference to
reach the capability, via iomgr->cap.
Convert all uses in select and poll backends, but not win32 ones.
Convert callers in the scheduler and elsewhere.
Also convert the three CMM primops that call IOManager APIs. They just
need to use Capability_iomgr(MyCapability()).
-
4f3d8f31
by Duncan Coutts at 2026-07-18T08:49:12-04:00
Split posix/MIO.c out of posix/Signals.c
The MIO I/O manager was secretly living inside the Signals file.
Now it gets its own file, like any other self-respecting I/O manager.
-
52ce04a9
by Duncan Coutts at 2026-07-18T08:49:12-04:00
Rationalise some scheduler run queue utilities
Move them all to the same place in the file.
Make some static that were used only internally.
Also remove a redundant assignment after calling truncateRunQueue that
is already done within truncateRunQueue.
-
75bbdebc
by Duncan Coutts at 2026-07-18T08:49:12-04:00
Rename initIOManager{AfterFork} to {re}startIOManager
These are more accurate names, since these actions happen after
initialisation and are really about starting (or restarting) background
threads.
-
724c0517
by Duncan Coutts at 2026-07-18T08:49:12-04:00
Free per-cap I/O managers during shutdown and forkProcess
Historically this was not strictly necessary. The select and win32
legacy I/O managers did not maintain any dynamically allocated
resources. The new poll one does (an auxillary table), and so this
should be freed.
After forkProcess, all threads get deleted. This includes threads
waiting on I/O or timers. So as of this patch, resetting the I/O
manager is just about tidying things up. For example, for the poll
I/O manager this will reset the size of the AIOP table (which
otherwise grows but never shrinks).
In future however the re-initialising will become neeecessary for
functionality, since some I/O managers will need to re-initialise
wakeup fds that are set CLOEXEC.
-
c007d122
by Duncan Coutts at 2026-07-18T08:49:12-04:00
Add a TODO to the MIO I/O manager
The direction of travel is to make I/O managers per-capability and have
all their state live in the struct CapIOManager. The MIO I/O manager
however still has a number of global variables.
It's not obvious how handle these globals however.
-
b65ab7b3
by Duncan Coutts at 2026-07-18T08:49:12-04:00
Add a FIXME note in the Poll I/O manager
-
daf2bd6f
by Duncan Coutts at 2026-07-18T08:49:12-04:00
Add missing updateRemembSetPushClosure in poll I/O manager
For the non-moving GC.
-
e33ca830
by Duncan Coutts at 2026-07-18T08:49:12-04:00
Minor doc improvement to struct StgAsyncIOOp member outcome
Mention the enumeration names, as well as their numeric values. The rest
of the code uses the enum names.
-
4edd2579
by Duncan Coutts at 2026-07-18T08:49:12-04:00
Minor doc improvements for StgTSOBlockInfo
Clarify that certain union members are used only by certain legacy
I/O managers. Hopefully we will be able to remove these at some point.
-
536bedbb
by Duncan Coutts at 2026-07-18T08:49:12-04:00
Avoid exporting various win32-specific rts symbols
The BeginPrivate.h / EndPrivate.h scheme works perfectly well on
Windows, but all of the rts/win32/*.h files were not using it.
-
8139b5ac
by Duncan Coutts at 2026-07-18T08:49:12-04:00
Remove wakeupIOManager, ioManagerWakeup and setIOManagerWakeupFd
We no longer need wakeupIOManager for the threaded RTS case, so we can
remove it and the bits only needed to support it. This includes the
pipe/eventfd fd shared between the RTS and the in-library I/O manager
used for waking up the I/O manager thread. The pipe/eventfd still
exists, but it no longer has to be communicated to the RTS, since the
RTS no longer needs to use it.
So we remove the RTS API export setIOManagerWakeupFd, and remove uses of
it within the I/O managers in ghc-internal.
-
74fe7c66
by Duncan Coutts at 2026-07-18T08:49:12-04:00
Add a new interruptIOManager API for the I/O managers
It will be used to interrupt awaitCompletedTimeoutsOrIO. Also update the
return type and docs for awaitCompletedTimeoutsOrIO to have it return
false when it gets interrupted, and have no useful post condition in
that case.
-
38792843
by Duncan Coutts at 2026-07-18T08:49:13-04:00
Add interruptIOManager support for select I/O manager
Uses the FdWakup mechanism.
-
2f3b00aa
by Duncan Coutts at 2026-07-18T08:49:13-04:00
Add interruptIOManager support for poll I/O manager
Uses the FdWakup mechanism.
A quirk we have to cope with is that we now need to poll one more fd --
the wakeup_fd_r -- but this fd has no corresponding entry in the
aiop_table. This is awkward since we have set up our aiop_poll_table to
be an auxilliary table with matching indicies.
The solution this patch uses (and described in the comments) is to have
two tables: struct pollfd *aiop_poll_table, *full_poll_table;
and to have the aiop_poll_table alias the tail of the full_poll_table.
The head entry in the full_poll_table is the extra fd. So we poll the
full_poll_table, while the aiop_poll_table still has matching indicies
with the aiop_table.
Hurrah for C aliasing rules.
-
cee50131
by Duncan Coutts at 2026-07-18T08:49:13-04:00
Add interruptIOManager support for win32 legacy I/O manager
And remove unused related helper resetAbandonRequestWait. It is not
called because the event is created in auto-reset mode, so never needs
to be reset manually.
-
cf453143
by Duncan Coutts at 2026-07-18T08:49:13-04:00
Note lack of interruptIOManager support for WinIO I/O manager
Though there's a plausible design, we can't sanely test it at the moment
due to related WinIO bugs. Filed as issue #27403.
-
1b74a0ad
by Duncan Coutts at 2026-07-18T08:49:13-04:00
Be more explicit about enum IOReadOrWrite values, and type within cmm
Belt and braces.
-
b388d093
by Brian McKenna at 2026-07-18T17:51:50-04:00
Ignore ticks in the pattern-match term oracle
The term-oracle in the pattern-match checker is keyed by a canonical
form of the scrutinee, computed by `makeDictsCoherent`. That canonical
form was tick-sensitive: two occurrences of an otherwise identical
expression that happened to carry different ticks were treated as
distinct values, breaking long-distance information.
This shows up in practice under `-finfo-table-map`, because the
desugarer wraps every record-selector use site in a `SourceNote`
carrying that site's span. For example:
data Box = Box { unBox :: Maybe Int }
f b = case unBox b of
Nothing -> 0
Just _ -> let Just x = unBox b in x
The two `unBox b` expressionss carry different SourceNote spans, the
pattern-match checker sees them as different, the long-distance
information from the outer `Just _` branch never reaches the
let-pattern, and `Just x = unBox b` is wrongly reported as
non-exhaustive.
We now strip all ticks in `makeDictsCoherent`. This is documented as
Wrinkle (UD1) of Note [Unique dictionaries in the TmOracle CoreMap].
Fixes #27314
-
c23e1acb
by Mrjtjmn at 2026-07-18T17:52:45-04:00
Add explanations for unsolved Typeable constraints
This commit adds explanations for unsolved 'Typeable' constraints.
GHC will now provide additional explanations for an unsolved constraint
of the form 'Typeable ty', explain why GHC did not solve Typeable constraint.
e.g.:
- 'ty' is a polymorphic type (e.g. forall a. a -> a)
- 'ty' is a qualified type (e.g. Eq Int => Int)
- 'ty' is an unboxed sum type
- 'ty' is an unreduced type family application
- 'ty' whose kind is not typeable
Fixes #26532
-
cbef021e
by Artem Pelenitsyn at 2026-07-19T07:49:55-04:00
ghc-internal: Lock.hs: fix typo and indentation
-
42918646
by Duncan Coutts at 2026-07-19T07:50:36-04:00
Fix failing test GcStaticPointers for non-moving GC
Minor mistake in asserting something before checking for that same
thing.
Specifically, Bdescr asserts HEAP_ALLOCED_GC, but Bdescr was being used
prior to a guard that checks HEAP_ALLOCED_GC. The solution is just to
move the use of Bdescr after the guard.
Thanks to Simon Jakobi for identifying the problem.
-
c2f6dcd4
by Sasha Bogicevic at 2026-07-20T10:31:56+02:00
Improve error messages for invalid record wildcards
Record wildcard hints are now shown in more contexts and include
constructor arity; matching with `..` on a fieldless constructor
now produces a dedicated error message.
Fixes #21101
-
4c02e76b
by Duncan Coutts at 2026-07-21T10:37:21-04:00
Mark test T27105 as fragile, citing issue #27522
Scheduler fairness is fine, except when it isn't. And it isn't on CI
machines surprisingly often! See the issue for details.
-
43dd2b15
by Recursion Ninja at 2026-07-21T17:09:53-04:00
Resolving many TTG related orphan type-class instances
This is part a technical debt removal effort made possible now
that separating out the AST via TTG has come to a close.
As the AST in 'L.H.S' has been incrementally separated from the GHC internals,
there are many accumulated orphan instance of 'Binary', 'NFData', 'Outputable',
and 'Uniquable'. The orphan instance of data-types from within 'L.H.S' have had
their orphan instances moved to either:
1. The module which defines the data-type
2. The module which defines the type-class;
i.e. moving an orphan 'Binary' instance to 'GHC.Utils.Binary'
Orphan instances resolved (37):
| Data-type | Resolved instance(s) | Former orphan module(s) |
| -------------------- | -------------------------- | ------------------------- |
| Role | Binary, NFData, Outputable | GHC.Core.Coercion.Axiom |
| SrcStrictness | Binary, NFData, Outputable | GHC.Core.DataCon |
| SrcUnpackedness | Binary, NFData, Outputable | GHC.Core.DataCon |
| Fixity | Binary, Outputable | GHC.Hs.Basic |
| FixityDirection | Binary, Outputable | GHC.Hs.Basic |
| LexicalFixity | Outputable | GHC.Hs.Basic |
| CCallTarget | NFData | GHC.Hs.Decls.Foreign |
| CType | NFData | GHC.Hs.Decls.Foreign |
| Header | NFData | GHC.Hs.Decls.Foreign |
| OverlapMode | Binary, NFData | GHC.Hs.Decls.Overlap |
| WithHsDocIdentifiers | NFData, Outputable | GHC.Hs.Doc |
| HsDocString | NFData | GHC.Hs.DocString |
| HsDocStringChunk | Binary, Outputable | GHC.Hs.DocString |
| HsDocStringDecorator | Binary, Outputable | GHC.Hs.DocString |
| NamespaceSpecifier | Outputable | GHC.Hs.ImpExp |
| ForAllTyFlag | Binary, NFData, Outputable | GHC.Hs.Specificity |
| Specificity | Binary, NFData | GHC.Hs.Specificity |
| PromotionFlag | Binary, Outputable | GHC.Types.Basic |
| FieldLabelString | Outputable, Uniquable | GHC.Types.FieldLabel |
| InlinePragma | Binary | GHC.Types.InlinePragma |
-------------------------
Metric Decrease:
hard_hole_fits
-------------------------
Closes #21262, #27469
-
ab9ab895
by Cheng Shao at 2026-07-21T17:10:53-04:00
rts: always use StgInt to represent cost center id
Currently cost center id is modeled as `Int` and it should be `StgInt`
uniformly in the RTS, hence this patch. Fixes #27524.
-
94d8f83b
by Cheng Shao at 2026-07-22T11:30:40-04:00
hadrian: clean up stale cabal package flags in the tree
This patch cleans up stale cabal package flags in the tree and related
hadrian/autoconf logic. Closes #27474.
Co-authored-by: Codex <codex@openai.com>
-
0bf1d8c9
by Sasha Bogicevic at 2026-07-22T11:31:21-04:00
parser: don't suggest ImportQualifiedPost when it is already enabled
-Wprepositive-qualified-module unconditionally attached a hint to
enable ImportQualifiedPost, even when the extension was already on
(as it is by default under GHC2021). Record the extension's state in
the PsWarnImportPreQualified diagnostic and drop the hint when it is
already enabled.
Fixes #27380
-
700a1dd1
by Simon Jakobi at 2026-07-23T11:21:20-04:00
ci: Reduce lint job setup costs
Avoid fetching unnecessary history and submodules for lightweight lint
jobs. Run changelog validation without Hadrian.
Because the lint-author job is now based on the .lint template directly,
we enhance it to allow Git to read from the runner-owned checkouts,
In the previously used .lint-params template, this permissions issue was
addressed via `chown`.
Closes #27521.
Assisted-by: gpt-5.6-sol via Codex CLI
-
26a44fb0
by ARATA Mizuki at 2026-07-23T11:22:10-04:00
testsuite: Fix memory issues of doublex2_* and simd010
doublex2_* had reads from uninitialized memory.
simd010 had out-of-bounds array access.
Fixes #27544
-
4d798b17
by Duncan Coutts at 2026-07-23T17:26:18-04:00
Eliminate STM_AWOKEN
It was used as nullary closure for the block_info.closure in the case of
a thread being awoken after an STM transaction.
However, while it was written, it was never read, so contributed nothing
to the behaviour. Furthermore, in the only place it was set (in
tryWakeupThread) the why_blocked was immediately overwritten by the
NotBlocked status, and the block_info was updated accordingly (by
appendToRunQueue).
So it didn't even serve a purpose of clarifying an intermediate state,
there really was no such intermediate state.
Cleaning this up will allow the BlockedOnSTM case to follow the same
pattern as the other why_blocked cases that do not use the block_info,
and in turn this reduces the number of different categories.
-
e1cece79
by Duncan Coutts at 2026-07-23T17:26:18-04:00
Document that eventlog thread stop code ThreadBlocked is no longer used
It has not been used since GHC 7.0.x (2011). In 7.2 all the BlockedOn*
codes were added, and these were and are used instead of ThreadBlocked.
-
795db115
by Duncan Coutts at 2026-07-23T17:26:18-04:00
Add a proper mapping to eventlog external thread stop status
That is the mapping from rts-internal codes, to the coes used in the
status field in the eventlog EVENT_STOP_THREAD event.
See issue #9003 for what goes wrong when we mess this up. In that
ticket, people note that we should really not require the internal
tso->why_blocked codes to leak into the external eventlog thread stop
codes. The same principle applies to the StgThreadReturnCode.
This change properly separates them, and explicitly maps between them
using a pair of (compact, constant) tables. These tables are pretty
small (with no alignment constraints) and will soon shrink so it seems
a sensible tradeoff.
We also introduce and use proper EVENT_STOP_THREAD constants in the
event log format header. Previously there was not specification in the
code for these (only in the docs): the values were encoded into the
conversion code.
This will allow us to renumber the internal why_blockd codes without
breaking the eventlog output.
-
6f1c8efa
by Duncan Coutts at 2026-07-23T17:26:18-04:00
Remove unused tso->block_info.wakeup member
Presumably it was used once, but not now.
-
740b88a9
by Duncan Coutts at 2026-07-23T17:26:18-04:00
Document StgTSOBlockInfo to say what cases use what members
In principle, tso->why_blocked is the tag for the StgTSOBlockInfo union,
so we should be able to say for each union member the why_blocked cases
that use that member.
-
5b92eae2
by Duncan Coutts at 2026-07-23T17:26:18-04:00
Add a tso->block_info.mvar member and use it
in preference to the generic block_info.closure union member, with
casts.
The plan is that when we know what case we're in (via tso->why_blocked)
then we can always access the correct union member, and so we will only
need to access block_info.closure for generic cases where we don't know
or don't care.
-
d931715f
by Duncan Coutts at 2026-07-23T17:26:18-04:00
Add a tso->block_info.unused member and use it
in preference to the generic block_info.closure union member, with
casts.
The plan is that when we know what case we're in (via tso->why_blocked)
then we can always access the correct union member, and so we will only
need to access block_info.closure for generic cases where we don't know
or don't care.
-
47e28ebb
by Duncan Coutts at 2026-07-23T17:26:18-04:00
Avoid storing to tso->block_info.closure
In one case we can use a specific union member (.prev) instead. In
several cases the stores were in fact redundant because of subsequent
overwrites.
In scavengeTSO we replace setting tso->block_info.closure to a valid
closure, with an assertion that the block_info.unused is already set to
END_TSO_QUEUE which is a valid (static) closure.
-
96e4749d
by Duncan Coutts at 2026-07-23T17:26:18-04:00
Renumber the tso->why_blocked constants
We can do this now because we have separated the internal values from
the external ones used in the eventlog.
This lets us put them back into a deliberate order and consolodate some
gaps.
More importantly, it is a prepation for a slightly more sophisticated
encoding.
-
8f62661c
by Duncan Coutts at 2026-07-23T17:26:18-04:00
Define constants for the existing stg_threadStatuszh return codes
The stg_threadStatuszh reuses the internal tso->why_blocked codes but
also extends them with a couple previously magic values. This is awkward
since we need to know what those magic values are so we don't
accidentally use those values to mean something else. By pulling a
definition up to where the why_blocked codes are defined we will be able
to avoid mistakenly assining those codes some meaning (or just changing
the BlockedThreadComplete, BlockedThreadKilled code if necessary).
-
42c69ae2
by Duncan Coutts at 2026-07-23T17:26:18-04:00
Extend the tso->why_blocked encoding to indicate block_info closures
We use some bit tricks to cheaply and generically test if a
tso->why_blocked tag implies that the corresponding tso->block_info will
contain a non-trivial valid closure (i.e. not just block_info.unused set
to END_TSO_QUEUE).
In particular we arrange for most why_blocked values to naturally have a
distinguishing bit, but for the BlockedOn{Read,Write,Delay} cases, they
can come in either non-closure or closure forms. We allow an additional
bit to distinguish these cases. The non-closure forms are only from
legacy I/O managers: select and win32-legacy. So this extra bit
mechanism will be able to be retired once the legacy I/O managers are
themselves retired.
This means in a few places we need to untag the why_blocked value before
inspecting it, but in most places we do not.
-
7c64632b
by Duncan Coutts at 2026-07-23T17:26:18-04:00
Use BlockInfoForceNonClosure in the select I/O manager
-
8fd7104a
by Duncan Coutts at 2026-07-23T17:26:18-04:00
Use BlockInfoForceNonClosure in the win32-legacy I/O manager
for the BlockedOn{Read,Write} since these use the non-heap allocated
StgAsyncIOResult.
-
e0da603b
by Duncan Coutts at 2026-07-23T17:26:18-04:00
Enforce the why_blocked and block_info rules in checkTSO
We now check the cases wher IsBlockInfoClosure should hold, the cases
that are supposed to use block_info.unused == END_TSO_QUEUE, and which
cases are allowed to use BlockInfoForceNonClosure.
This partially enforces the use of why_blocked as a tag for the
block_info union. We could be stricter and check for the correct
expected info table for the closure cases.
-
1dd0f381
by Duncan Coutts at 2026-07-23T17:26:18-04:00
Use IsBlockInfoClosure to simplify several tests
In GC and generic traversal we need to know if we should look at the
block_info.closure or not. Now we can do just that using a cheap bit
test on the why_blocked tag.
This fixes issue 26717, where the problem was that some GC modes did not
know when to look at block_info.closure, because the poll I/O manager
uses a closure for BlockedOn{Read,Write} while the select I/O manager
uses a non-closure. Now this information is in the why_blocked tag
itself.
-
7a00ffbc
by Duncan Coutts at 2026-07-23T17:26:18-04:00
Remove the now-unused scavengeTSOIOManager
The GC no longer has to delegate to the I/O manager, since it can use
IsBlockInfoClosure to decide things itself.
-
522a481f
by Duncan Coutts at 2026-07-23T17:26:18-04:00
Remove duplicate assertion
-
0874d965
by Duncan Coutts at 2026-07-23T17:26:18-04:00
Follow atomic access rules more consistently for tso->why_blocked
The rule is this:
store block_info *before* why_blocked
store why_blocked using store release
load why_blocked using load acquire
load block_info *after* why_blocked
This is a an atomic store release / load acquire pair and (if the reads
are in a separate thread to the writes, and the read receives the value
stored) then this guarantees a full "happens before" relationship of
these stores and loads.
In some cases, we do not need a full load acquire, because we don't read
the block_info at all and so do not need any ordering. In this case we
just need an atomic relaxed load.
This was being followed in most places, but not all. If there's good
reason in any case that we don't need atomic access, then we should
document that in a comment. In the absence of that I think it's easier
to follow the rule everywhere.
-
8f0bdbe1
by Duncan Coutts at 2026-07-23T17:26:19-04:00
Add a changelog entry
-
4fdfe757
by Alan Zimmerman at 2026-07-23T17:27:06-04:00
EPA: Keep decls together in ClassDecl
Similar to 1718230f4d3d19d8c49c0e5d496cb0fb6f399528 for HsValBindsLR,
this commit updates ClassDecl so that it no longer splits out the
assorted `LHsDecl GhcPs` until the renamer.
It does this by inserting a type family (separate from the classic TTG one) for this.
So
data TyClDecl
...
| ClassDecl {
...
tcdDecls :: XClassDecls pass
with
type instance XClassDecls GhcPs = [LHsDecl GhcPs]
type instance XClassDecls GhcRn = ClassDeclX GhcRn
type instance XClassDecls GhcTc = ClassDeclX GhcTc
data ClassDeclX pass
= ClassDeclX { tcdSigs :: [LSig pass], -- ^ Methods' signatures
tcdMeths :: LHsBinds pass, -- ^ Default methods
tcdATs :: [LFamilyDecl pass], -- ^ Associated types;
tcdATDefs :: [LTyFamDefltDecl pass], -- ^ Associated type defaults
tcdDocs :: [LDocDecl pass] -- ^ Haddock docs
}
-
f586c885
by Simon Jakobi at 2026-07-24T18:05:00-04:00
ci: Use shallow submodule clones by default
Limit submodule clones to depth one to reduce CI checkout costs. Keep
fetching full submodule history for the submodule lint jobs, which
inspect commits across a range.
Assisted-by: gpt-5.6-sol via Codex CLI
-
306120d2
by Duncan Coutts at 2026-07-24T18:05:43-04:00
Fix flaky test T3994 on FreeBSD
On current FreeBSD versions, calling getpgid on a zombie process fails.
In T3994, if we're really unlucky with delays and scheduling then we can
end up in exactly that situation.
Just catch that specific exception and ignore it. It's rare, and not our
fault.
-
7b116a0b
by Cheng Shao at 2026-07-24T18:06:24-04:00
ci: add missing workaround for docker permissions in lint jobs
Some lint jobs use ci-images with default user `ghc`, and the gitlab
ci docker executor requires the `sudo chown` workaround to fix
workspace directory permission issue. This patch adds the missing
workarounds for the lint jobs. Fixes #27554.
Co-authored-by: Codex <codex@openai.com>
-
815149f3
by Andrzej Rybczak at 2026-07-25T15:06:43+00:00
Add -Wdefaulted-callstack
Adds a new warning, -Wdefaulted-callstack, which warns when an implicit
CallStack parameter is defaulted to the empty stack. In particular, this
includes call sites where a function with a HasCallStack constraint is called
from a definition that does *not* provide one. At such call sites the call stack
is cut off and does not include the enclosing definition's callers, which can be
a source of surprise if the user wants complete call stacks.
Closes #27077.
-
f6f2343f
by Zubin Duggal at 2026-07-25T17:40:51-04:00
UniqueDFM: alter should preserve insertion order
Before it always inserting new elements at the end.
This is problematic because instances get inserted into the map with
`alterF`, which can change ordering of how instances are printed
with `:info` depending on the order in which we consult interfaces
I expect `alter id k = id` and `alter (fmap f) k = adjust f k`. Moving keys to
the end breaks that (`adjust` already preserves position).
Fixes #27532
-
5d0ab71a
by fendor at 2026-07-27T17:31:05-04:00
Introduce global unit database cache
As a first step for better sharing of `UnitInfo` across `UnitEnv`,
we introduce a new datatype called `ExternalUnitDatabases`.
It primarily serves as an in-memory representation of *all*
`UnitDatabase`s across `UnitEnv`. This means, if multiple `HomeUnitEnv`s
depend on the same database, one way or another, we make sure that we
don't parse from disk every time.
Instead, we store the in-memory representation in `ExternalUnitDatabases`.
`ExternalUnitDatabaseCache` is the equivalent of `ExternalUnitState` in
the `UnitEnv`. It is a mutable variable wrapping `ExternalUnitDatabases`.
The mutable `ExternalUnitDatabaseCache` is used in `initUnits` to make
sure we don't parse the same unit database multiple times.
Almost by accident, we change the semantics of `initUnits` to honour
modifications to `packageDBFlags`.
The inability to change `packageDBFlags` while also reusing the already
parsed `UnitDatabase`s was reported in #26423 as a bug.
Hence, we think this behaviour change is warranted and acceptable,
especially since it comes with a breaking change to the `initUnits` API.
Add regression test for #26423
Closes #26423
-
6cce494a
by fendor at 2026-07-27T17:31:05-04:00
Introduce UnitIndex for global external unit caching
`UnitInfo`s have been observed to cause a lot of memory usage in #27500.
Especially with multiple home units, as the same (external) units are
processed from scratch, even though most of the time we end up with
exactly the same `UnitInfo`.
We introduce a `UnitEnv` global cache that allows us to store external
unit information that is used across all `HomeUnitEnv`s.
The most important change in this commit is the introduction of the `UnitIndex`.
It stores a global mapping of `UnitId` -> `UnitInfo`, and `initUnits`
always uses the cached `UnitInfo` entry to populate each
`HomeUnitEnv`'s `UnitState`.
This allows us to ensure the following property:
> Each `UnitInfo` should be alive exactly once in GHC.
All `UnitState`s should reference 'UnitInfo's stored in the 'UnitIndex'.
This ensured by calling 'initUnits' with the 'UnitIndex'.
In addition, the `ExternalUnitDatabases` may also hold a reference
to each on-disk representation of `UnitInfo`.
This means, we impose an hard upper bound on the number of `UnitInfo`s
alive in the GHC session:
> The number of alive `UnitInfo`s closure objects must be the
> sum of all loaded unit database times two.
We add performance regression tests that make sure the number of live
`UnitInfo` cannot exceed this threshold.
Closes #27500
-------------------------
Metric Decrease:
MultiComponentModules
MultiComponentModulesRecomp
MultiComponentModulesRecomp100
mhu-perf
LinkableUsage02
-------------------------
These metrics increases are especially notable, as we are not even
sharing anything big but merely the global package database with 50
entries.
It shows how careful sharing of `UnitInfo` can improve memory usage.
We expect this to be much more notable when the whole cabal package
database is shared across multiple home units.
`LinkableUsage02` metric decreases on unreg and i386 platform, only.
---
Technical details
To share the `UnitInfo`s correctly, it is important that we extract
the `WireMap` into the `UnitIndex`. At the moment of writing, `WireMap`
must be globally the same for all `HomeUnitEnv`s.
This is important, as we could otherwise not cache the "fully-resolved"
`UnitInfo`, as we don't change the `UnitId` or `unitAbiHash` when
resolving wired-in units. Thus, there could be ambiguities, when the
`WireMap` is not the same for all `UnitState`s across the `UnitEnv`.
We consider a `UnitInfo` fully-resolved, if wired-in units have been
updated, the `UnitInfo` has been validated and variables in the unit
config, such as `${pkgroot}` have been resolved.
Updating the wired-in units requires the `WireMap` to be globally the
same.
-
f8e3bee9
by Zubin Duggal at 2026-07-27T17:31:49-04:00
testsuite: skip runtime stats tests on debugged compilers
Debugged flavours build the boot libraries without optimisation, so the
runtime numbers do not match the baselines.
-
1e326770
by Zubin Duggal at 2026-07-27T17:31:50-04:00
testsuite: mark #20706 tests fragile rather than broken
Whether the static linux linker issues manifest depends on the host
toolchain.
-
c0b13cbe
by Zubin Duggal at 2026-07-27T17:31:50-04:00
testsuite: exclude libnuma from mostly-static
It needs static system libraries (libnuma.a) that many platforms do not
ship.
Fixes #26914
-
bee1913d
by Alan Zimmerman at 2026-07-28T16:42:29-04:00
EPA: ClsInstDecl with decls as [LHsDecl GhcPs] in GhcPs
Similar to 4fdfe75731e01dad7d7fa474c2703d0d3965afb1, this commit
changes the as-parsed representation of class instance declarations to
[LHsDecl GhcPs], and only separates them by type from the renamer onward.
This also allows us to remove all the AnnSortKey machinery for exact
printing, as it is now no longer needed.
-
72c55eee
by Cheng Shao at 2026-07-28T16:43:11-04:00
hadrian: implement and use writeFileAtomic to fix race condition
This patch implements `writeFileAtomic` in hadrian and change all
invocations of shake non-atomic `writeFile'` to use `writeFileAtomic`,
to avoid multiple hadrian concurrent invocations overwriting the same
in-tree generated file not in the build root directory. Fixes #27536.
Additional notes:
- `writeFileChanged`/`writeFileChangedBS` cannot be made atomic since
it involves reading the file's older version, so their uses are left
alone. It doesn't affect #27536 given their outputs are contained in
the build root directory.
- It's possible to shrink this patch by only making writes outside the
build root directory atomic. But I think it's not worth the effort
for fine grained distinction here, and atomic writes within the
build root directory should also improve robustness of a hadrian
build.
- In the longer term we do want to make a ghc build only generate
files within the build root directory, though that's a lot of work
and outside the scope of this particular bugfix.
Co-authored-by: Codex <codex@openai.com>
-
46d4f963
by Sylvain Henry at 2026-07-29T06:38:40-04:00
RTS: correctly mark slop bytes when shrinking large arrays (#19048)
Correctly mark slop bytes even when profiling is off so that heap census
doesn't traverse garbage-collected closures.
-
4762a8bf
by Simon Jakobi at 2026-07-29T06:39:23-04:00
Add -XLazyFieldAnnotations (GHC proposal 752)
Unbundle the prefix `~` lazy field annotation syntax from StrictData. The
new LazyFieldAnnotations extension controls whether `~` is accepted on
constructor fields. StrictData (and Strict, transitively) imply the new
extension.
See https://github.com/ghc-proposals/ghc-proposals/blob/master/proposals/0752-lazy-field-annotations.rst.
Closes #24455.
Assisted-by: Claude Opus 4.8
-
0b6dcc84
by Simon Jakobi at 2026-07-29T06:40:04-04:00
testsuite: Relax T24471 residency tolerance
T24471 peak residency fluctuates enough on i386 to cause spurious
failures. Use the standard residency tolerance while retaining the
existing allocation threshold.
See https://gitlab.haskell.org/ghc/ghc/-/work_items/24471#note_682303.
Assisted-by: gpt-5.6-sol via Codex CLI
-
90e95b34
by Cheng Shao at 2026-07-29T06:40:45-04:00
compiler: fix missing top-level procedure labels in cmm dumps
This patch fixes missing top-level procedure labels in some
intermediate Cmm pass dumps. Fixes #27553.
Co-authored-by: Codex <codex@openai.com>
-
360a5946
by sheaf at 2026-07-29T06:41:35-04:00
Add some type-family-heavy performance tests
FamAppCachePerf stress-tests the performance of lookups in the
type family application cache.
T27336 is a minimisation extracted from the reported reproducer.
SimplCastPerf is a measure of coercion growth due to the simplifier
calling mkTransCo without re-optimising the result.
-
3ec9e2b9
by Mike Pilgrem at 2026-07-31T08:21:33-04:00
GHC Guide: Improve docs on response files
-
e5b2a1f7
by sheaf at 2026-07-31T08:22:23-04:00
Disable Core Lint for TcPlugin_RewritePerf
This is a compiler performance test, but the test source hard-coded
-dcore-lint, defeating the measurement.
-------------------------
Metric Decrease:
TcPlugin_RewritePerf
-------------------------
-
85b10c00
by Alan Zimmerman at 2026-07-31T22:09:47+01:00
EPA: Remove LocatedP from OverlapMode
We have
type LocatedP = GenLocated SrcSpanAnnP
type SrcSpanAnnP = EpAnn AnnPragma
As the first step in removing this in favour of LocatedA which only
captures location, comments and trailing annotations, we remove it
from OverlapMode
We do this by moving the AnnPragma into the TTG extension point
instead.
-
c9a34a00
by Viktor Dukhovni at 2026-08-02T04:34:17-04:00
Fix note typo
-
4f2a21f7
by Andreas Klebinger at 2026-08-02T22:46:46-04:00
Apply oneShot Monad trick to STG LintM
-
21e4b89d
by Andreas Klebinger at 2026-08-02T22:46:46-04:00
stgLint: Use a single reader env for read only arguments.
-
d415f38a
by Alan Zimmerman at 2026-08-02T22:47:27-04:00
EPA: Remove LocatedP from CType
The next step of removing use of LocatedP by moving
the AnnPragma for CType into its TTG extension point
instead.
-
8fc6f882
by Simon Jakobi at 2026-08-05T14:53:41-04:00
testsuite: Don't crash on non-UTF-8 test output
read_stdout, read_stderr_for, read_comp_stderr and read_diff decoded
strictly (the first three with UTF-8, read_diff with the locale
encoding), so a test emitting invalid UTF-8 (binary output, or a crash
truncating a multi-byte character) raised UnicodeDecodeError and was
reported as a framework failure instead of its actual result.
Decode with errors='replace', like read_no_crs and safe_print.
Assisted-by: Claude Fable 5
-
56534866
by Simon Jakobi at 2026-08-05T14:53:41-04:00
testsuite: Colorize the test summary, also in CI
The summary headings were plain, and SUMMARY was colored unconditionally,
so the escapes also ended up in the file written by --summary-file.
Color is now decided per output sink via term_color.colored_if; see the
comments in term_color.
CI logs are not a tty, but GitLab's log viewer renders ANSI colors, so
add --force-colors and pass it in .gitlab/ci.sh.
Assisted-by: Claude Opus 5
-
bceb541a
by Simon Jakobi at 2026-08-05T14:53:42-04:00
testsuite: Repeat unexpected failure output in the summary
Finding out why a test failed meant scrolling back through a possibly
very long log to the point where the test ran. The summary now repeats
the captured output of unexpected failures, before the statistics, so
the most interesting part is at the end of the log (#16720).
Output mismatches report their diff instead of the mismatching stream
(see Note [Redundant output in test results]). The repeated output is
bounded per stream, and skipped altogether beyond
MAX_SUMMARY_OUTPUT_TESTS failure blocks. Tests failing identically in
several ways share one block.
Test results now report a source-relative directory, stable regardless
of where the run was started from.
Assisted-by: Claude Fable 5
-
2ab02c57
by Ben Gamari at 2026-08-05T14:54:24-04:00
base: Don't drop exception context in SomeException(toException)
For reasons that are lost to time, the implementation of [CLC #200]
that was merged inappropriately dropped `ExceptionContext` in the
`toException` implementation given to `SomeException`.
Fix this infelicity.
[CLC #200]: https://github.com/haskell/core-libraries-committee/issues/200
-
126ce574
by Vladislav Zavialov at 2026-08-05T14:55:05-04:00
Test case for #20902
Starting with GHC 9.14.1 (the first major release to include 51e3ec83),
and from point releases GHC 9.10.2 and GHC 9.12.3 (backports cc4470be68
and b30f25591e), all examples in this ticket are handled as expected.
-
b14d8d59
by Alan Zimmerman at 2026-08-05T14:55:46-04:00
EPA: Remove LocatedP, last use in WarningTxt
The last step of removing LocatedP, by moving the AnnPragma for
WarningTxt into its TTG extension point instead.
This also allows us to remove LocatedP and SrcSpanAnnP
-
70b58c8f
by Vladislav Zavialov at 2026-08-05T14:56:27-04:00
Test cases for #18725
Starting with GHC 9.4 (the first release to include 268efcc9a4), the program in
this ticket no longer panics. A standalone kind signature breaks the recursive
loop, so the type constructor can be used in a kind within its own group.
T18725a checks that this is accepted with the signature present, while T18725b
confirms it is still rejected without it.
-
b18c8dd5
by Zubin Duggal at 2026-08-06T15:51:01-04:00
hie files: Dump the type table when dumping with -ddump-hie
-
f839d0fb
by Zubin Duggal at 2026-08-06T15:51:01-04:00
hie files: Take evidence for quantified constraints into account when saving evidence terms to the hie ast
Fixes #25709
-
5753ebaa
by Simon Jakobi at 2026-08-06T15:51:43-04:00
testsuite: fix stale paths for the ghc-config build artifacts
ghc-config.hs moved from testsuite/mk/ to testsuite/ghc-config/ in
6c7a49139c, but the .gitignore entry and the clean rule still referred to
the old location. As a result the compiled ghc-config binary, which
boilerplate.mk rebuilds on every make-driven test run, showed up as an
untracked file and was never cleaned.
Assisted-by: Claude Opus 5
-
246d4d72
by Simon Peyton Jones at 2026-08-06T15:52:25-04:00
Documentation only
...driven by my investigation of #27591
-
be69e9df
by Alan Zimmerman at 2026-08-06T15:53:05-04:00
EPA: Replace AnnPragma with individual types
We introduced AnnPragma as a common type for all pragma usages wrapped
in LocatedP / SrcSpanAnnP. Now that those are gone, and the AnnPragma
moved into the TTG points for the given items, we can ensure that each
carries only the annotations it needs.
So we remove AnnPragma, and in its place bring in
AnnCType
AnnWarningTxt
AnnOverlap
AnnAnnDecl
AnnPragSCC
-
0779e12c
by Simon Jakobi at 2026-08-07T12:36:11-04:00
Cmm: print unreachable blocks under -dppr-debug (#27368)
Unreachable blocks linger in a CmmGraph's block map for most of the Cmm
pipeline, but pprCmmGraph only ever printed the blocks reachable from the
entry, so dumps looked consistent while the graph was not. Issues like
#27368 were hard to debug due to this.
pprCmmGraph now appends the stored-but-unreachable blocks under a
"// unreachable blocks:" heading when -dppr-debug is on.
See Note [unreachable blocks] in GHC.Cmm.Pipeline.
Assisted-by: Claude Opus 5
-
3a0f9a51
by Simon Peyton Jones at 2026-08-07T12:36:54-04:00
Fix three bugs related to required type args and INLINE pragmas
* `GHC.Core.Opt.Arity.mkEtaForAllMCo` got the visibility flags back to front,
leading to a Lint error (#27557)
* The arity in an InlineSaturation is the VisArity not the Arity; the
two can differ when we have "required" type arguments. This made the
INLINE pragma argument counting go wrong in `makeCorePair` (#27590).
* When a simple binding has a type signature, we take special path in `tcPolyCheck`,
leading to an outer `AbsBinds` that has no dictionaries, even when the binding
is in fact overloaded. That confused the inline-arity computation in
`makeCorePair` (#27589).
The latter two are fixed using the new function `GHC.HsToCore.Binds.findSatArity`.
That actually simplifies the API of `makeCorePair`, which is nice.
The first bug is fixed by swapping the visiblity flags in
`GHC.Core.Opt.Arity.mkEtaForAllMCo`
Getting the INLINE behaviour right led to some perf changes:
* Runtime /halved/ on T7954 due to better specialisation
* Compile time increased by 6% in T21839c because a bit more inlining
happened, as it always should have done.
* For some reason compile-time max-bytes-used dropped by 30% on
T27336, but only on one build configuration; and it increased
on LinkableUsage02 by 6% on another configuration
Geometric mean effect on our compile time benchmarks is +0.1%.
Metric Decrease:
T27336
T7954
Metric Increase:
LinkableUsage02
T21839c
-
4f985108
by Vladislav Zavialov at 2026-08-07T17:49:50-04:00
Discard type arguments in tcPatToExpr (#27440, #27583)
The builder expression of an implicitly bidirectional pattern synonym must not
mention types written in the RHS:
* Invisible type arguments led to a panic (#27440)
* Required type arguments failed with out-of-scope variables (#27583)
Both are now discarded, following the precedent established by pattern
signatures (#9867).
Discarding type arguments takes some care: a type pattern cannot be told from a
value pattern by syntax alone, as the `type` keyword may be omitted. Consider:
data T a b c where
MkT :: forall a. forall b c -> a -> T a b c
pattern P :: x -> T x y z
pattern P x = MkT @a (type b) c x
In P's right-hand side, `@a` and `type b` are clearly type arguments, but what
about `c` and `x`? We can only tell by matching the patterns against MkT's
type. So tcPatToExpr now runs in TcM and matches the arguments against the
constructor's TyVarBinders using zipPatsBndrs, which is made public for this
purpose. The resulting builder is $bP x = MkT _ _ x.
See Note [Discarding types in the builder expression].
Test cases: T27440a T27440b T27440c T27440d T27440e
T27583a T27583b T27583c T27583d T27583e T27583f T27583g
Metric Increase: LinkableUsage02
Metric Decrease: T27336
Assisted-by: Claude Opus 5
-
eb1dcd4d
by sheaf at 2026-08-07T17:50:40-04:00
mkWpFun_FRR: fix ordering of coercion composition
When the subsumption machinery generates an eta-expansion, we must
perform a representation polymorphism check to ensure the lambda binder
it introduces has a fixed runtime representation.
This is done in GHC.Tc.Utils.mkWpFun_FRR.
This check involves composing quite a few coercions, arising from
representation-polymorphism checks on both the actual and expected
argument types. These coercions are then chained using HsWrapper
composition, <.>. The ordering of composition was incorrect, leading to
the Core Lint failure reported in #27639. This commit fixes that.
Fixes #27639
-
3a552476
by Simon Jakobi at 2026-08-09T15:20:06-04:00
Word64Map: add compareSize
compareSize m c compares the size of a map to an Int, but unlike
compare (size m) c it stops traversing the map once the outcome is
determined.
Based on https://github.com/haskell/containers/pull/1139
Assisted-by: Claude Opus 5
-
6e2c99d8
by Simon Jakobi at 2026-08-09T15:20:06-04:00
Use a pigeonhole sort for deterministic UniqDFM iteration
Deterministic UniqDFM iteration used a list mergesort, allocating O(n
log n) cons cells and contributing significantly to compiler allocations
(#27459).
Use a pigeonhole sort where appropriate, while retaining the mergesort
fallback. See Note [Sorting a UDFM] and Note [Cost of deterministic
iteration].
The peak_megabytes_allocated increase for LinkableUsage02 is probably
due to GC timing noise. See #27613.
-------------------------
Metric Decrease:
InstanceMatching
InstanceMatching1
ManyAlternatives
T12707
T13379
T13719
T24471
T27336
T5321FD
T5321Fun
T783
Metric Increase 'peak_megabytes_allocated':
LinkableUsage02
-------------------------
Assisted-by: gpt-5.6-sol via Codex CLI
-
a938ab12
by sheaf at 2026-08-09T15:20:48-04:00
Testsuite: don't measure max residency for T27336
We really care more about total allocations for this test, so this commit
removes the maximum residency measurement.
-
7d94bb78
by Alan Zimmerman at 2026-08-09T15:21:29-04:00
EPA: Remove LocatedE, replace with LocatedA
This gets rid of one more LocatedXXX occurrence
-
9df24b7e
by sheaf at 2026-08-10T14:28:30-04:00
hie.yaml: use a polyglot shell/batch script
This commit merges hie-bios and hie-bios.bat into a single polyglot
script. This avoids Windows users having to manually update hie.yaml
in order to be able to use HLS.
-
7f75c588
by Alan Zimmerman at 2026-08-10T14:29:11-04:00
EPA: Remove type parameter from AnnList
This is a step towards cutting AnnList down to its core for formatting
lists only
-
e8d1a0d6
by Bernhard M. Wiedemann at 2026-08-10T21:31:23-04:00
driver: Link object files in a deterministic order
The object files handed to the linker come from the HomePackageTable,
which is ordered by the order in which modules finished compiling. With
-j1 that is the build plan order, with -jN it is whatever the scheduler
produced, so the same sources can link to different (but equivalent)
binaries.
The order reaches the output: .text and .rodata contributions are
concatenated in link order, so e.g. building the hdav executable of the
DAV package twice, once with -j1 and once with -j4, yields two binaries
that differ in ~100kB of section contents.
Sort the home modules by module before collecting their linkables,
guarded under `Opt_ObjectDeterminism` .
Fixes #27612
Signed-off-by: Bernhard M. Wiedemann <bwiedemann@suse.de>
-
556db2f3
by sheaf at 2026-08-10T21:32:06-04:00
Reduce SpecConstr threshold in GHC.Tc.Solver.Rewrite
As remarked in #27628, this module currently sits on a knife's edge: if
the body of 'simplifyArgsWorker' is made even a tiny bit smaller, then
SpecConstr suddenly kicks in and causes disastrous reboxing of the
LiftingContext argument.
To make this less likely to happen, this commit lowers the SpecConstr
threshold.
-
9c343135
by Andrei Borzenkov at 2026-08-11T10:38:55+04:00
Parentheses in prefix GADT constructors (#27423)
Updated `splitLHsGadtTy` to allow looking
through the parentheses for inner binders. General example
of a code pattern that's allowed now:
data S a where
MkS :: (forall a. S a)
That should work now with any combination of nested
foralls and parentheses.
We don't perform parenthesis unwrapping for record
GADT constructors in accordance with GHC Proposal #402.
To this end `con_inner_bndrs` no longer stores plain forall
telescopes: `[HsForAllTelescope pass]` is replaced with
`[LHsGadtArg pass]`, a new `HsArg`-style type whose
`HsGadtForAll` holds an inner telescope and whose `HsGadtPar`
holds a pair of parentheses. The parentheses carry no meaning
for renaming or type checking; the only reason to record them
is exact-printing.
Updated `pprConDecl` to improve the `parse == parse . ppr . parse`
property of GADT pretty-printing.
The pretty printer can now output code that's similar to this:
data T a where
MkT1 :: (forall a. T a)
MkT2 :: forall . forall a. T a
These are special cases of inner forall binders
for prefix GADT constructors, when we have either
implicit or zero explicit outer binders.