1 patch for repository http://code.haskell.org/XMonadContrib: Fri Dec 12 13:02:21 AST 2014 nzeh@cs.dal.ca * New layout module XMonad.Layout.Dwindle Adds two new layouts, Dwindle and Spiral. The latter is a, to me, more intuitive version of XMonad.Layout.Spiral.spiral. The former produces the same window sizes as Spiral but pushes the smallest windows into one of the screen corners. New patches: [New layout module XMonad.Layout.Dwindle nzeh@cs.dal.ca**20141212170221 Ignore-this: 23d1a41b83a174790e47a54947cbfc08 Adds two new layouts, Dwindle and Spiral. The latter is a, to me, more intuitive version of XMonad.Layout.Spiral.spiral. The former produces the same window sizes as Spiral but pushes the smallest windows into one of the screen corners. ] { addfile ./XMonad/Layout/Dwindle.hs hunk ./XMonad/Layout/Dwindle.hs 1 +{-# LANGUAGE FlexibleInstances, MultiParamTypeClasses #-} + +----------------------------------------------------------------------------- +-- | +-- Module : XMonad.Layout.Spiral +-- Copyright : (c) Norbert Zeh +-- License : GPL +-- +-- Maintainer : Norbert Zeh +-- Stability : experimental +-- Portability : portable +-- +-- Two layouts: One, 'Spiral', is a reimplementation of +-- 'XMonad.Layout.Spiral.spiral' with, at least to me, more intuitive semantics. +-- The other, 'Dwindle', is inspired by a similar layout in awesome and produces +-- the same sequence of decreasing window sizes as Spiral but pushes the +-- smallest windows into a screen corner rather than the centre. +-- +----------------------------------------------------------------------------- + +module XMonad.Layout.Dwindle ( -- * Usage + -- $usage + Dwindle(..) + , Direction(..) + , Rotation(..) + ) where + +import Data.List ( unfoldr ) +import XMonad hiding ( Rotation ) +import XMonad.StackSet ( integrate, Stack ) + +-- $usage +-- This module can be used as follows: +-- +-- > import XMonad.Layout.Dwindle +-- +-- Then add something like this to your layouts: +-- +-- > Dwindle R CW 1.5 1.1 +-- +-- or +-- +-- > Spiral L CW 1.5 1.1 +-- +-- The former produces a layout that places the second window to the right of +-- the first, the third below the second, the fourth to the right of the third, +-- and so on. The first window is 1.5 times as wide as the second one, the +-- second is 1.5 times as tall as the third one, and so on. Thus, the further +-- down the window stack a window is, the smaller it is and the more it is +-- pushed into the bottom-right corner. +-- +-- The latter produces a layout with the same window sizes but places the second +-- window to the left of the first one, the third above the second one, the +-- fourth to the right of the third one, and so on. +-- +-- In both cases, the fourth parameter, 1.1, is the factor by which the third +-- parameter increases or decreases in response to Expand or Shrink messages. +-- +-- For more detailed instructions on editing the layoutHook see: +-- +-- "XMonad.Doc.Extending#Editing_the_layout_hook" + +-- | Layouts with geometrically decreasing window sizes. Both layouts split the +-- screen into a rectangle for the first window and a rectangle for the +-- remaining windows, which is split recursively to lay out these windows. Both +-- layouts alternate between horizontal and vertical splits. +-- +-- In each recursive step, the split 'Direction' determines the placement of the +-- remaining windows relative to the current window: to the left, to the right, +-- above or below. The split direction of the first split is determined by the +-- first layout parameter. The split direction of the second step is rotated 90 +-- degrees relative to the first split direction according to the second layout +-- parameter of type 'Rotation'. So, if the first split is 'R' and the second +-- layout parameter is 'CW', then the second split is 'D'. +-- +-- For the 'Spiral' layout, the same 'Rotation' is used for computing the split +-- direction of each step from the split direction of the previous step. For +-- example, parameters 'R' and 'CW' produces the direction sequence 'R', 'D', +-- 'L', 'U', 'R', 'D', 'L', 'U', ... +-- +-- For the 'Dwindle' layout, the 'Rotation' alternates between 'CW' and 'CCW' in +-- each step. For example, parameters 'U' and 'CCW' produce the direction +-- sequence 'U', 'L', 'U', 'L', ... because 'L' is the 'CCW' rotation of 'U' and +-- 'U' is the 'CW' rotation of 'L'. +-- +-- In each split, the current rectangle is split so that the ratio between the +-- size of the rectangle allocated to the current window and the size of the +-- rectangle allocated to the remaining windows is the third layout parameter. +-- This ratio can be altered using 'Expand' and 'Shrink' messages. The former +-- multiplies the ratio by the fourth layout parameter. The latter divides the +-- ratio by this parameter. +-- +-- Parameters for both layouts: +-- +-- * First split direction +-- +-- * First split rotation +-- +-- * Size ratio between rectangle allocated to current window and rectangle +-- allocated to remaining windows +-- +-- * Factor by which the size ratio is changed in response to 'Expand' or 'Shrink' +-- messages +data Dwindle a = Dwindle !Direction !Rotation !Rational !Rational + | Spiral !Direction !Rotation !Rational !Rational + deriving (Read, Show) + +-- | Split directions +data Direction = L | R | U | D + deriving (Read, Show) + +-- | Rotation between consecutive split directions +data Rotation = CW | CCW + deriving (Read, Show) + +instance LayoutClass Dwindle a where + pureLayout (Dwindle dir rot ratio _) = dwindle alternate dir rot ratio + pureLayout (Spiral dir rot ratio _) = dwindle rotate dir rot ratio + pureMessage (Dwindle dir rot ratio delta) = + fmap (\ratio' -> Dwindle dir rot ratio' delta) . changeRatio ratio delta + pureMessage (Spiral dir rot ratio delta) = + fmap (\ratio' -> Spiral dir rot ratio' delta) . changeRatio ratio delta + +changeRatio :: Rational -> Rational -> SomeMessage -> Maybe Rational +changeRatio ratio delta = fmap f . fromMessage + where f Expand = ratio * delta + f Shrink = ratio / delta + +dwindle :: AxesGenerator -> Direction -> Rotation -> Rational -> Rectangle -> Stack a -> + [(a, Rectangle)] +dwindle trans dir rot ratio rect st = unfoldr genRects (integrate st, rect, dirAxes dir, rot) + where genRects ([], _, _, _) = Nothing + genRects ([w], r, a, rt) = Just ((w, r), ([], r, a, rt)) + genRects ((w:ws), r, a, rt) = Just ((w, r'), (ws, r'', a', rt')) + where (r', r'') = splitRect r ratio a + (a', rt') = trans a rt + +dbg :: AxesGenerator -> Direction -> Rotation -> Rational -> Rectangle -> [a] -> + [(a, Rectangle)] +dbg trans dir rot ratio rect st = unfoldr genRects (st, rect, dirAxes dir, rot) + where genRects ([], _, _, _) = Nothing + genRects ([w], r, a, rt) = Just ((w, r), ([], r, a, rt)) + genRects ((w:ws), r, a, rt) = Just ((w, r'), (ws, r'', a', rt')) + where (r', r'') = splitRect r ratio a + (a', rt') = trans a rt + +splitRect :: Rectangle -> Rational -> Axes -> (Rectangle, Rectangle) +splitRect (Rectangle x y w h) ratio (ax, ay) = (Rectangle x' y' w' h', Rectangle x'' y'' w'' h'') + where portion = ratio / (ratio + 1) + w1 = (round $ fi w * portion) :: Int + w2 = fi w - w1 + h1 = (round $ fi h * portion) :: Int + h2 = fi h - h1 + x' = x + fi (negate ax * (1 - ax) * w2 `div` 2) + y' = y + fi (negate ay * (1 - ay) * h2 `div` 2) + w' = fi $ w1 + (1 - abs ax) * w2 + h' = fi $ h1 + (1 - abs ay) * h2 + x'' = x + fi (ax * (1 + ax) * w1 `div` 2) + y'' = y + fi (ay * (1 + ay) * h1 `div` 2) + w'' = fi $ w2 + (1 - abs ax) * w1 + h'' = fi $ h2 + (1 - abs ay) * h1 + fi :: (Num b, Integral a) => a -> b + fi = fromIntegral + +type Axes = (Int, Int) +type AxesGenerator = Axes -> Rotation -> (Axes, Rotation) + +dirAxes :: Direction -> Axes +dirAxes L = (-1, 0) +dirAxes R = ( 1, 0) +dirAxes U = ( 0, -1) +dirAxes D = ( 0, 1) + +alternate :: AxesGenerator +alternate = chDir alt + +rotate :: AxesGenerator +rotate = chDir id + +chDir :: (Rotation -> Rotation) -> AxesGenerator +chDir f (x, y) r = (a' r, r') + where a' CW = (-y, x) + a' CCW = ( y, -x) + r' = f r + +alt :: Rotation -> Rotation +alt CW = CCW +alt CCW = CW hunk ./xmonad-contrib.cabal 207 XMonad.Layout.DraggingVisualizer XMonad.Layout.DragPane XMonad.Layout.Drawer + XMonad.Layout.Dwindle XMonad.Layout.DwmStyle XMonad.Layout.FixedColumn XMonad.Layout.Fullscreen } Context: [X.C.Prime: doc tweaks Devin Mullins **20141002075939 Ignore-this: 20d6b829b810f48b5e4b4c161b39b312 ] [X.A.Navigation2D: add convenience functions for setting config & keybindings Devin Mullins **20141002075757 Ignore-this: ed01137f03a531f73315ed503d1eb6ef 1. Added 'additionalNav2DKeys' which adds keybindings for the cartesian product of direction keys and (modifier, action) pairs given. 2. Added 'navigation2D' which combines that with 'withNavigation2DConfig'. 3. Added 'additionalNav2DKeysP' and 'navigation2DP' which do the same, but use the 'additionalKeysP' syntax. ] [X.C.Prime: doc fixes Devin Mullins **20141001075855 Ignore-this: dbbe00791b04df61dcd595c50333fba ] [X.C.Prime: add 'withScreens' and friends Devin Mullins **20141001075250 Ignore-this: eba37b1ff3da265a4dcc509f538fce4d The screen equivalent of 'withWorkspaces' lets you more easily define keys that move/swap between screens. Also, rename wsKeyspecs to wsKeys, and make a couple of doc tweaks. ] [Implement proper handling of dynamically changing hostname Anton Vorontsov **20140901072158 Ignore-this: 2aeac6d2161e666d40cda6a09f78b208 The module implements a proper way of finding out whether the window is remote or local. Just checking for a hostname and WM_CLIENT_MACHINE being equal is often not enough because the hostname is a changing subject (without any established notification mechanisms), and thus WM_CLIENT_MACHINE and the hostname can diverge even for a local window. This module solves the problem. As soon as there is a new window created, we check the hostname and WM_CLIENT_MACHINE, and then we cache the result into the XMONAD_REMOTE property. Notice that XMonad itself does not know anything about hostnames, nor does it have any dependency on Network.* modules. For this module it is not a problem: you can provide a mean to get the hostname through your config file (see usage). Or, if you don't like the hassle of handling dynamic hostnames (suppose your hostname never changes), it is also fine: this module will fallback to using environment variables. ] [Add Stoppable layout for power saving Anton Vorontsov **20140901072141 Ignore-this: a52805d9f3095cd7af48507847ed2fe3 This module implements a special kind of layout modifier, which when applied to a layout, causes xmonad to stop all non-visible processes. In a way, this is a sledge-hammer for applications that drain power. For example, given a web browser on a stoppable workspace, once the workspace is hidden the web browser will be stopped. Note that the stopped application won't be able to communicate with X11 clipboard. For this, the module actually stops applications after a certain delay, giving a chance for a user to complete copy-paste sequence. By default, the delay equals to 15 seconds, it is configurable via 'Stoppable' constructor. The stoppable modifier prepends a mark (by default equals to "Stoppable") to the layout description (alternatively, you can choose your own mark and use it with 'Stoppable' constructor). The stoppable layout (identified by a mark) spans to multiple workspaces, letting you to create groups of stoppable workspaces that only stop processes when none of the workspaces are visible, and conversely, unfreezing all processes even if one of the stoppable workspaces are visible. To stop the process we use signals, which works for most cases. For processes that tinker with signal handling (debuggers), another (Linux-centric) approach may be used. See https://www.kernel.org/doc/Documentation/cgroups/freezer-subsystem.txt ] [X.C.Prime: doc changes Devin Mullins **20140925203037 Ignore-this: 51204c1a9f2e6ed21228d2910417fd21 ] [X.C.Prime: add withWorkspaces et al. Devin Mullins **20140925203034 Ignore-this: 65f691270110cc5de13c950d9dcb0c17 This allows easier configuration of workspaces and their keybindings. Required generalizing the 'Prime' type, so lots of other lines changed in rather trivial ways. ] [X.C.Prime: add ifThenElse binding Devin Mullins **20140924191509 Ignore-this: ae775c418c27301b9c12d2a233502cec This is necessary for if-then-else support in the user's config. ] [X.C.Prime: doc fixes Devin Mullins **20140915080601 Ignore-this: 15e3c445a99d3b2d3a235aa76119797 ] [X.C.Prime: fix 'def' hyperlink in doc Devin Mullins **20140914075352 Ignore-this: a1de1d81a5f140ab7d90edbf393e9bda ] [XMonad.Config.Prime, a do-notation for config Devin Mullins **20140914064828 Ignore-this: f7397aa6e6efe5d76acebfa22c567baa Note that the use of RebindableSyntax is because of the need to vary the layoutHook type throughout the config. The alternative, using the existential Layout type, was rejected because it required TemplateHaskell in order to look nice, and TemplateHaskell is not portable. I've tried to make a version of (>>) that also worked on normal monads, but have had no luck as of yet. Maybe some intrepid soul can add it later. ] [X.P.Shell: fix doc typo me@twifkak.com**20130317115516 Ignore-this: bdd385a9142ed039a917d135e76293fe ] [reverse workspaces, so that switching to a dynamic workspace group restores the focus to the screen that was focused at group creation time nwfilardo@gmail.com**20140913174118 Ignore-this: b74c02b1892159694827e35122c2d517 ] [add filepath dependency, needed by new X.P.Pass module me@twifkak.com**20140913070926 Ignore-this: fec97086c1e66cf8a036265bd1a970a8 ] [add-new-xmonad-prompt-pass eniotna.t@gmail.com**20140829131928 Ignore-this: 11e85dfe3d24cef88d8d89f4e7b1ec0b This module provides 3 to ease passwords manipulation (generate, read, remove): - one to lookup passwords in the password-storage. - one to generate a password for a given password label that the user inputs. - one to delete a stored password for a given password label that the user inputs. All those prompts benefit from the completion system provided by the module . The password store is setuped through an environment variable PASSWORD_STORE_DIR. If this is set, use the content of the variable. Otherwise, the password store is located on user's home @$HOME\/.password-store@. Source: - The password storage implementation is . - Inspired from ] [use Data.Map instead of Data.Map.Strict to support containers < 0.5 Adam Vogt **20140815043141 Ignore-this: 436d18657d8499f4ce57311e84503d9f ] [config-mate allbery.b@gmail.com**20140803020659 Ignore-this: d5de258c0a28cd5ba64a59cf37cd480a Initial support for the Mate desktop environment (http://mate-desktop.org). Based on existing Gnome 2 support, since Mate is a maintained fork of Gnome 2. ] [debug-managehook allbery.b@gmail.com**20140803020601 Ignore-this: 51f9255b496cca79e4a53e274c400ecc A set of hooks, and convenience combinators, to help with ManageHook debugging. Ordinary users may well want to use debugManageHookOn in normal configs, specifying a key sequence which can be pressed before running a command in order to capture debug information just for that command's main window. This is especially useful when trying to diagnose issues such as programs that do not play well with SpawnOn, or ManageHook matching on 'title' when the program does not set the window title until after it is mapped. ] [debug-debug allbery.b@gmail.com**20140803020530 Ignore-this: cbb2b1d99293e3a4d02a256c2733aeb0 Various fixes and enhancements to DebugWindow and DebugStack. ManageDebug requires these fixes, but some of them are significant even if not using ManageDebug. ] [derive Applicative instances to suppress AMP warning Adam Vogt **20140710163950 Ignore-this: c2110d07bccc61462c3fbf73c900aaa1 ] [clean up cabal file and drop support for base < 3 Adam Vogt **20140710013255 Ignore-this: 76b142e2b114604feac9b8e41cf71ab ] [add-duck-duck-go-search-engine eniotna.t@gmail.com**20140617174246 Ignore-this: 29bbfb2d07d9ddf36bf0268a4e255f81 ] [XSelection: getSelection: fix connection exhaustion bug (issue #573); include warning gwern@gwern.net**20140601025019 Ignore-this: add21190fc07338b243c2241cc746119 ] [Fix dbus-send call in XMonad.Config.Gnome md143rbh7f@gmail.com**20140129032114 Ignore-this: ed62458b55c8b34b77f73027eeee1a73 dbus-send --print-reply=string is invalid, but it was silently ignored until recently: http://cgit.freedesktop.org/dbus/dbus/commit/tools/dbus-send.c?id=c690ee4351f99ed5e629ffcf5f4a2edcd418d103 I've changed XMonad.Config.Gnome to run --print-reply=literal, since that's what the old behavior was. ] [warning police (unused variables) Adam Vogt **20140505001242 Ignore-this: a15b4d844b1da4f1f1f9b6095c968705 ] [This patch makes the Ssh extension works with **user** arguments in ssh, .e.g ssh admin@localhost. linxray@gmail.com**20140504091120 Ignore-this: 297673e11d3049c4f127aac3e172d361 ] [remove trailing whitespace in L.BinarySpacePartition Adam Vogt **20140501011943 Ignore-this: 8dd677978992e0854801b8f254463dc2 ] [replace Bound with the equivalent Direction2D Adam Vogt **20140501011540 Ignore-this: b1f1c256aba07f70918fe1d693c8087b ] [remove unused extension in BSP Adam Vogt **20140501011455 Ignore-this: a4962486b2aa3980536bff19a537451e ] [Add BinarySpacePartition layout benweitzman@gmail.com**20140430205848 Ignore-this: a85d1dc51bf54c59ae2bd9d948cc1088 ] [X.Actions.DynamicWorkspaceGroups: export new function addRawWSGroup Brent Yorgey **20140428142901 Ignore-this: a487882c9571bf91ff921d6561bb4cc6 ] [Remove unneeded context with the IfMax layout instance Adam Vogt **20140422221105 Ignore-this: 3b8ac316f56df6a84420754db769fb0 Extra constraints on instances are about as useful as -XDataTypeContexts ] [Adding side tabs and replacing TabbarLocation with Direction2D. nrujac@gmail.com**20140219200811 Ignore-this: edabeec973b4e0d61515818367689843 ] [warning police Daniel Wagner **20140316183747 Ignore-this: fd16435ccdd3fee8924723cc690cc239 ] [New module: XMonad.Util.WindowState Dmitry Bogatov **20140218100229 Ignore-this: 14a6fa263c423cd8cca3b2645b3930d7 Save almost arbitary data per window ] [Add side tabs to the tabbed layout. nrujac@gmail.com**20140213215247 Ignore-this: f81bafe9cb75a30ed6bbbe68cf5d66c0 ] [SpawnNamedPipe hlint cleanup cwills.dev@gmail.com**20140202213613 Ignore-this: dbb68c4c5522026bd108d0158e747b48 ] [document and cleanup SpawnNamedPipe cwills.dev@gmail.com**20140202211000 Ignore-this: b264278f1f1ab1f18b37245a5ff33136 ] [Added SpawnNamedPipe cwills.dev@gmail.com**20140202143415 Ignore-this: 87797ffffc8d0fd088482bd0c5baf0e ] [Make commandToComplete in XMonad.Prompt.Shell complete last word md143rbh7f@gmail.com**20140130200050 Ignore-this: b0fe22fdd7b9409835fd0ca069f2e01a The following change from 2013-02-09 breaks shell completion for me: hunk ./XMonad/Prompt/Shell.hs 65 + commandToComplete _ c = c It seems to be passing the entire string into compgen in order to get the file completions, but it should only pass the last word. I propose reverting this change. Comments are appreciated. ] [expose and document X.L.IndependentScreens.marshallSort Daniel Wagner **20140128212844 Ignore-this: 90c1437c6ffe1dbd8f4a4ed192097ec ] [ServerMode properly indent Adam Vogt **20131219201440 Ignore-this: 761b39c3e3c90b6123f068e8b1d34e5d ] [remove ServerMode tabs Adam Vogt **20131219201000 Ignore-this: f21448c248ec0ac289c309ed964ebcff ] [fix -Wall ServerMode Adam Vogt **20131219181030 Ignore-this: 708dd5fc60f43dee3d1da085002052f ] [documentation note that ServerMode is similar to wmctrl Adam Vogt **20131219180748 Ignore-this: 3215bdf1c698c798eca8ed7f62a0f591 ] [Generalized XMonad.Hooks.ServerMode polson2@hawk.iit.edu**20131216025100 Ignore-this: e58da3b168a1058f32982833ea25a739 ] [IfMax-Layout Ilya Portnov **20131201072634 Ignore-this: dac53f2a0505e740f05fdf03f1db0c21 This adds a new ("conditional") layout, IfMax, which simply runs one layout, if there are <= N windows, and else runs another layout. ] [fix UrgencyHook and add filterUrgencyHook Adam Vogt **20130924224738 Ignore-this: 3b7c62275701e6758397977c5c09b744 ] [export XMonad.Hooks.UrgencyHook.clearUrgency (issue 533) Adam Vogt **20130923031349 Ignore-this: dafe5763d9abcfa606f5c1a8cf5c57d6 ] [minor documentation fix: manageDocks doesn't do anything with struts, so don't claim it does Daniel Wagner **20130814125106 Ignore-this: a2610d6c1318ac0977abfc21d1b91632 ] [don't pretend to be LG3D in X.C.Dmwit because this confuses modern GTK Daniel Wagner **20130813211636 Ignore-this: 8f728dc1b4bf5e472d99419cc5920e51 ] [XMonad.Actions.UpdatePointer: generalise updatePointer Liyang HU **20130730071007 Ignore-this: 3374a62b6c63dcc152dbf843cd0577f0 ] [XMonad.Actions.UpdatePointer: document TowardsCentre Liyang HU **20130730053746 Ignore-this: 2d684b12e4fff0ebec254bea4a4546a3 ] [Haddock formatting in H.Minimize Adam Vogt **20130723155658 Ignore-this: 5db3186a51dec58f78954466ded339cb ] [Bump version (and xmonad dependency) to 0.12 Adam Vogt **20130720205857 Ignore-this: ce165178ca916223501f266339f1de39 This makes a breakage due to missing patches in core a bit more obvious. Previously you would have a build failure regarding some missing identifiers (def re-exported by XMonad from Data.Default), while after applying this patch it will be clear that xmonad-core needs to be updated. ] [Fix issue 551 by also getting manpath without -g flag. Adam Vogt **20130716030536 Ignore-this: ded2d51eb7b7697c0fdfaa8158d612df Instead of taking Ondrej's approach of figuring out which man (man-db or http://primates.ximian.com/~flucifredi/man/) is used by the system, just try both sets of flags. ] [Escape dzen markup and remove xmobar tags from window titles by default. Adam Vogt **20130708144813 Ignore-this: cf56bff752fbf78ea06d5c0cb755f615 The issue was that window titles, such as those set by, for example a browser, could set the window title to display something like normal title Which could be executed by xmobar (or dzen). This adds a ppTitleSanitize which does the above functions. This way when users override ppTitle, the benefits are not lost. Thanks to Raúl Benencia and Joachim Breitner for bringing this to my attention. ] [DynamicBars-use-ExtensibleState gopsychonauts@gmail.com**20130618074755 Ignore-this: afacba51af2be8ede65b9bcf9b002a7 Hooks.DynamicBars was previously using an MVar and the unsafePerformIO hack ( http://www.haskell.org/haskellwiki/Top_level_mutable_state ) to store bar state. Since ExtensibleState exists to solve these sorts of problems, I've switched the file over to use unsafePerformIO instead. Some functions' types had to be changed to allow access to XState, but the public API is unchanged. ] [Catch exceptions when finding commands on PATH in Prompt.Shell Thomas Tuegel **20130616230219 Ignore-this: 5a4d08c80301864bc14ed784f1054c3f ] [Fix haddock parse error in X.A.LinkWorkspaces Adam Vogt **20130528133448 Ignore-this: 42f05cf8ca9e6d1ffae3bd20666d87ab ] [use Data.Default wherever possible, and deprecate the things it replaces Daniel Wagner **20130528013909 Ignore-this: 898458b1d2868a70dfb09faf473dc7aa ] [eliminate references to defaultConfig Daniel Wagner **20130528005825 Ignore-this: 37ae613e4b943e99c5200915b9d95e58 ] [minimal change needed to get xmonad-contrib to build with xmonad's data-default patch Daniel Wagner **20130528001040 Ignore-this: 291e4f6cd74fc2b808062e0369665170 ] [Remove unneeded XSync call in Layout.ShowWName Francesco Ariis **20130517153341 Ignore-this: 4d107c680572eff464c8f6ed9fabdd41 ] [Remove misleading comment: we definitely don't support ghc-6.6 anymore Adam Vogt **20130514215851 Ignore-this: 2d071cb05709a16763d039222264b426 ] [Fix module name in comment of X.L.Fullscreen Adam Vogt **20130514215727 Ignore-this: cb5cf18c301c5daf5e1a2527da1ef6bf ] [Minor update to cabal file (adding modules & maintainership) Adam Vogt **20130514215632 Ignore-this: 82785e02e544e1f797799bed5b5d9be2 ] [Remove trailing whitespace in X.A.LinkWorkspaces Adam Vogt **20130514215421 Ignore-this: 5015ab4468e7931876eb66b019af804c ] [Update documentation of LinkWorkspaces Module quesel@informatik.uni-oldenburg.de**20110328072813 Ignore-this: da863534931181f551c9c54bc4076c05 ] [Added a module for linking workspaces quesel@informatik.uni-oldenburg.de**20110210165018 Ignore-this: 1dba2164cc3387409873d33099596d91 This module provides a way to link certain workspaces in a multihead setup. That way, when switching to the first one the other heads display the linked workspaces. ] [Cache results from calcGap in ManageDocks Adam Vogt **20130425155811 Ignore-this: e5076fdbdfc68bc159424dd4e0f14456 http://www.haskell.org/pipermail/xmonad/2013-April/013670.html ] [Remove unnecessary contexts from L.MultiToggle Adam Vogt **20130217163356 Ignore-this: 6b0e413d8c3a58f62088c32a96c57c51 ] [Generalises modWorkspace to take any layout-transforming function gopsychonauts@gmail.com**20130501151425 Ignore-this: 28c7dc1f6216bb1ebdffef5434ccbcbd modWorkspace already was capable of modifying the layout with an arbitrary layout -> layout function, but its original type restricted it such that it could only apply a single LayoutModifier; this was often inconvenient, as for example it was not possible simply to compose LayoutModifiers for use with modWorkspace. This patch also reimplements onWorkspaces in terms of modWorkspaces, since with the latter's less restrictive type this is now possible. ] [since XMonad.Config.Dmwit mentions xmobar, we should include the associated .xmobarrc file Daniel Wagner **20130503194055 Ignore-this: 2f6d7536df81eb767262b79b60eb1b86 ] [warning police Daniel Wagner **20130502012700 Ignore-this: ae7412ac77c57492a7ad6c5f8f50b9eb ] [XMonad.Config.Dmwit Daniel Wagner **20130502012132 Ignore-this: 7402161579fd2e191b60a057d955e5ea ] [minor fixes to the haddock markup in X.L.IndependentScreens Daniel Wagner **20130411193849 Ignore-this: b6a139aa43fdb39fc1b86566c0c34c7a ] [add whenCurrentOn to X.L.IndependentScreens Daniel Wagner **20130408225251 Ignore-this: ceea3d391f270abc9ed8e52ce19fb1ac ] [Allow to specify the initial gaps' states in X.L.Gaps Paul Fertser **20130222072232 Ignore-this: 31596d918d0050e36ce3f64f56205a64 ] [should bump X11 dependency, too, to make sure we have getAtomName Daniel Wagner **20130225180527 Ignore-this: 260711f27551f18cc66afeb7b4846b9f ] [getAtomName is now defined in the X11 library Daniel Wagner **20130225180323 Ignore-this: 3b9e17c234679e98752a47c37132ee4e ] [Allow to limit maximum row count in X.Prompt completion window Paul Fertser **20130221122050 Ignore-this: 923656f02996f2de2b1336275392c5f9 On a keyboard-less device (such as a smartphone), where one has to use an on-screen keyboard, the maximum completion window height must be limited to avoid overlapping the keyboard. ] [Note in U.NameActions that xmonad core can list default keys now Adam Vogt **20130217233026 Ignore-this: 937bff636fa88171932d5192fe8e290b ] [Export U.NamedActions.addDescrKeys per evaryont's request. Adam Vogt **20130217232619 Ignore-this: a694a0a3ece70b52fba6e8f688d86344 ] [Add EWMH DEMANDS_ATTENTION support to UrgencyHook. Maarten de Vries **20130212181229 Ignore-this: 5a4b314d137676758fad9ec8f85ce422 Add support for the _NET_WM_STATE_DEMANDS_ATTENTION atom by treating it the same way as the WM_HINTS urgency flag. ] [Unconditionally set _NET_WORKAREA in ManageDocks Adam Vogt **20130117180851 Ignore-this: 9f57e53fba9573d8a92cf153beb7fe7a ] [spawn command when no completion is available (if alwaysHighlight is True); changes commandToComplete in Prompt/Shell to complete the whole word instead of using getLastWord c.lopez@kmels.net**20130209190456 Ignore-this: ca7d354bb301b555b64d5e76e31d10e8 ] [order-unindexed-ws-last matthewhague@zoho.com**20120703222726 Ignore-this: 4af8162ee8b16a60e8fd62fbc915d3c0 Changes the WorkspaceCompare module's comparison by index to put workspaces without an index last (rather than first). ] [SpawnOn modification for issue 523 Adam Vogt **20130114014642 Ignore-this: 703f7dc0f800366b752f0ec1cecb52e5 This moves the function to help clean up the `Spawner' to the ManageHook rather than in functions like spawnOn. Probably it makes no difference, the reason is because there's one manageSpawn function but many different so this way there are less functions to write. ] [Update L.TrackFloating.useTransient example code Adam Vogt **20130112041239 Ignore-this: e4e31cf1db742778c1d59d52fdbeed7a Suggest useTransient goes to the right of trackFloating which is the configuration actually tested. ] [Adapt ideas of issue 306 patch to a new modifier in L.TrackFloating Adam Vogt **20130112035701 Ignore-this: d54d27b71b97144ef0660f910fd464aa ] [Make X.A.CycleWS not rely on hidden WS order Dmitri Iouchtchenko **20130109023328 Ignore-this: 8717a154b33253c5df4e9a0ada4c2c3e ] [Add X.H.WorkspaceHistory Dmitri Iouchtchenko **20130109023307 Ignore-this: c9e7ce33a944facc27481dde52c7cc80 ] [Allow removing arbitrary workspaces Dmitri Iouchtchenko **20121231214343 Ignore-this: 6fce4bd3d0c5337e5122158583138e74 ] [Remove first-hidden restriction from X.A.DynamicWorkspaces.removeWorkspace' Dmitri Iouchtchenko **20121231214148 Ignore-this: 55fb0859e9a5f476a834ecbdb774aac8 ] [Add authorspellings file for `darcs show authors'. Adam Vogt **20130101040031 Ignore-this: c3198072ebc6a71d635bec4d8e2c78fd This authorspellings file includes a couple people who've contributed to xmonad (not XMonadContrib). When people have multiple addresses, the most recent one has been picked. ] [TAG 0.11 Adam Vogt **20130101014231 Ignore-this: 57cf32412fd1ce912811cb7fafe930f5 ] [bump cabal-version to satsify hackage Adam Vogt **20130101014159 Ignore-this: 1dd69577a60bae63362a42022764e5fd ] [bump version to 0.11 Adam Vogt **20121231104252 Ignore-this: 8c57d0f366509655d0473adf802eb1ce ] [Add more metadata to cabal file Adam Vogt **20121231184513 Ignore-this: b7767194e905f2bbd918bb0d371f281 ] [X.A.Workscreen make the whole module description show up for haddock Adam Vogt **20121231024600 Ignore-this: a2ac895989090322a849695068f812b5 ] [Note that an alternative to XMonad.Actions.ShowText is X.U.Dzen Adam Vogt **20121231023042 Ignore-this: ae6476e5d33a559fd8503c44413311b8 ] [Add X.A.DynamicWorkspaces.renameWorkspaceByName. Dmitri Iouchtchenko **20121227063531 Ignore-this: 4b8aa0405de3969000b1a78eb12992 ] [Change type of X.A.ShowText.handleTimerEvent so example code typechecks. Adam Vogt **20121226013841 Ignore-this: 3c58a9ff124ab02325df6f38e0eaec05 ] [Describe arguments for X.A.ShowText.flashText Adam Vogt **20121226013725 Ignore-this: 7f00a11196115ebf814c616aaf8e96f ] [Add XMonad.Actions.ShowText pastorelli.mario@gmail.com**20121225202635 Ignore-this: 5f4818f7ec9ad37df58e73d4bb8b5590 ] [Record polachok's fix for issue 507 Adam Vogt **20121216182724 Ignore-this: 13743d035e50f642de017c3304f914e ] [Removes unused function spawnWithActions and redundant imports in XMonad.Actions.Launcher c.lopez@kmels.net**20121215223714 Ignore-this: 76d7ac195e186b491968a548a13889c ] [A.Launcher markup identifiers for haddock links Adam Vogt **20121215165914 Ignore-this: 2fd3fa1dd4e00d573dd359a4b6a7291b ] [Address warnings from Debug modules Adam Vogt **20121215165525 Ignore-this: f97416ae4feffe4e5f9916d14d9e1524 The warnings were related to ghc-7.6 removing Prelude.catch (triggering warnings regarding the import hiding it), as well as defaulting of some numeric types. ] [Removes LocateMode and LocateRegexMode from XMonad.Actions.Launcher c.lopez@kmels.net**20121214211230 Ignore-this: b8ad32f23f15368a94202f9ad73995f2 ] [debug-hooks allbery.b@gmail.com**20120813223821 Ignore-this: 7f41c93fdd6643c687598d2fe07aad5d Hooks to print diagnostic information to stderr (usually .xsession-errors) to help debug complex issues involving the StackSet and received events. ] [Remove trailing whitespace. Adam Vogt **20121109014156 Ignore-this: 72e3afb6e6df47c51262006601765365 ] [Use Control.Exception.catch explitly to avoid warnings Adam Vogt **20121109013506 Ignore-this: 2cebdfe604c581f2b4a644e9aed726c7 The base that comes with ghc-7.6.1 no longer includes Prelude.catch; so these modules were changed so that there is no warning for import Prelude hiding (catch) At the same time these changes should be compatible with older GHCs, since the catch being has never been the one in the Prelude. ] [Add missing type signatures. Adam Vogt **20121109012752 Ignore-this: f54f5d9907ae48d58c98de7f8eb1f8a For whatever reason, some patches applied were missing these signatures. While haddock has been able to include inferred signatures for a while, including type signatures makes it easier to see if and when types have been changed. ] [Rename variables "state" to avoid warnings about shadowing Adam Vogt **20121109012316 Ignore-this: cd063d632412f758ca9fed6393521c8f XMonad core re-exports Control.Monad.State, which includes a function "state" if you happen to use mtl-2. Since there's a chance xmonad still works with mtl-1 avoid imports like: import XMonad hiding (state) ] [Rename variable in L.Minimize to avoid shadowing. Adam Vogt **20121109003410 Ignore-this: b46d3e8e0d4106cea6966116be386677 This "state" is new with a newer mtl. ] [Gut H.ICCCMFocus: issue 177 has been merged in core. Adam Vogt **20121108225716 Ignore-this: 937fe7f514ea6e36ee529e055e100e7f Keep the module for now: the LG3D bit might still be useful and there's no need to break configs unnecessarily. ] [ewmh-eventhook-custom pastorelli.mario@gmail.com**20120816153032 Ignore-this: 95176f6d955d74321c28caafda63faa0 Add ewmhDesktopsEventHookCustom, a generalized version of ewmhDesktopsEventHook that takes a sort function as argument. This sort function should be the same used by the LogHook. ] [Added smart spacing to the spacing module daedalusinfinity@gmail.com**20120923034527 Ignore-this: 9104bc8feb832f63f2f18998c0f7ba92 Added smart spacing to the spacing module, which adds spacing to all windows, except to windows on singleton workspaces. ] [Improves haddock documentation c.lopez@kmels.net**20120826091716 Ignore-this: a0ce4838652acfff7922c111e4d879bb ] [Improve comments, add an error throw that shouldn't happen c.lopez@kmels.net**20120826085426 Ignore-this: 7675070826b3c53499e4352e692d6036 ] [fix a bug when ncompletions = nrows c.lopez@kmels.net**20120826083137 Ignore-this: 5f573028318473c333809217c271a81d ] [Fixes typos in Actions.Launcher haddock documentation c.lopez@kmels.net**20120811112502 Ignore-this: f8152c0ad59d2b0cc9a6c9061e83aaf0 ] [Correctly get the autocompletion item when alwaysHighlight in XMonad.Prompt is True c.lopez@kmels.net**20120811104805 Ignore-this: fa2600df210c7d3472a797f19fb31a7 ] [Removes warnings, adds a browser value for LauncherConfig in haddock comments c.lopez@kmels.net**20120628114533 Ignore-this: 2610cf63594db3df61bac52f3d8f5836 ] [Changes on XPrompt: c.lopez@kmels.net**20120628101749 Ignore-this: 2384f5c1b886716b3d9785877c2e32f9 * Adds mkPromptWithModes, creates a prompt given a list of modes (list of XPType). * Adds Setting `alwaysHighlight` to defaultXPConfig. When set to true, autocompletion always highlight the first result if it is not highlighted. Adds module XMonad.Actions.Launcher. This module allows to combine and switch between instances of XPrompt. It includes a default set of modes which require the programs `hoogle`, `locate` and `calc` to be installed to work properly. ] [accept more windows as docks Daniel Wagner **20120823124153 Ignore-this: 21d9b406c7e39cca2cc60331aab04873 ] [strip newlines from dmenu's returns to be compatible with the newest version of dmenu longpoke@gmail.com**20120723212807 Ignore-this: 3b11a35125d0bc23b33e0b926562f85a ] [A workscreen permits to display a set of workspaces on several kedals0@gmail.com**20120706093308 Ignore-this: 572ed3c3305205bfbcc17bb3fe2600a3 screens. In xinerama mode, when a workscreen is viewed, workspaces associated to all screens are visible. The first workspace of a workscreen is displayed on first screen, second on second screen, etc. Workspace position can be easily changed. If the current workscreen is called again, workspaces are shifted. This also permits to see all workspaces of a workscreen even if just one screen is present, and to move windows from workspace to workscreen. ] [refer to the new name 'handleEventHook' instead of the old name 'eventHook' in X.L.Fullscreen documentation Daniel Wagner **20120618181003 Ignore-this: bd3b26c758cf3993d5a93957bb6f3663 ] [UrgencyHooks made available as Window -> X () functions gopsychonauts@gmail.com**20120504062339 Ignore-this: 6a57cae1d693109b7e27c6471d04f50f Adds an UrgencyHook instance for the type Window -> X (), allowing any such functions to be used directly as UrgencyHooks. The Show and Read constraints were removed from the UrgencyHook class in order to permit this; these constraints were required only in a historical implementation of the module, which used a layout modifier. All existing configurations using UrgencyHooks should remain fully functional. New configs may make use of this modification by declaring their UrgencyHook as a simple Window -> X () function. ] [updates to XMonad.Prompt re: word-oriented commands Brent Yorgey **20120510174317 Ignore-this: 138b5e8942fe4b55ad7e6ab24f17703f + change killWord and moveWord to have emacs-like behavior: first move past/kill consecutive whitespace, then move past/kill consecutive non-whitespace. + create variants killWord' and moveWord' which take a predicate specifying non-word characters. + create variants defaultXPKeymap' and emacsLikeXPKeymap' which take the same sort of predicate, which is applied to all keybindings with word-oriented commands. ] [Added isUnfocusedOnCurrentWS and fadeInactiveCurrentWSLogHook for better support of fading/opacity on multi monitor setups Jesper Reenberg **20120329141818 Ignore-this: d001a8aafbcdedae21ccd1d18f019185 ] [Fixed X.A.GridSelect to be consistent in the way it (now) sorts the shown Jesper Reenberg **20120501180415 Ignore-this: 1d0991f9fb44e42f5d1c5a4f427ea661 elements when modifying the searchString. The implemented ordering sorts based on how "deep the needle is in the haystack", meaning that searching for "st" in the elements "Install" and "Study" will order them as "Study" and "Install". Previously there was no ordering and when using GridSelect to select workspaces, the ordering was not consistent, as the list of workspaces (if not modified manually) is ordered by last used. In this case either "Study" or "Install" would come first depending on which workspace was last visited. ] [Use getXMonadDir to get the default xmonad directory. Julia Jomantaite **20120501121427 Ignore-this: a075433761488b76a58a193aeb4e4a25 ] [Minor haddock formatting for X.L.OnHost and X.A.DynamicWorkspaceOrder Adam Vogt **20120428194552 Ignore-this: 843ec567e249cc96d51ca931f1e36514 ] [Remove trailing whitespace. Adam Vogt **20120428194048 Ignore-this: d61584110954e84d3611ef3497a29725 ] [Add emacs-like keys to browse history in XMonad.Prompt Carlos Lopez-Camey **20120421110737 Ignore-this: b90345f72007d09a6b732b974c0faf79 ] [Adds an emacs-like Keymap in XMonad.Prompt Carlos Lopez-Camey **20120421012335 Ignore-this: f281b8ad01f3d21055e2d6de79af2d79 ] [add 'withNthWorkspace' to DynamicWorkspaceOrder. jakob@pipefour.org**20120407184640 Ignore-this: f5f87ffe9ddf1a12fab775e6fb8e856f Note this is very similar to the function of the same name exported by DynamicWorkspaces. Ultimately it would probably be cleaner to generalize the one in DynamicWorkspaces to accept an arbitrary workspace sort as a parameter; this is left as an exercise for future hackers. ] [XMonad.Layout.OnHost allows host-specific modifications to a layout, which allbery.b@gmail.com**20120320030912 Ignore-this: 4c0d5580e805ff9f40918308914f3bf9 is otherwise very difficult to do. Similarly to X.L.PerWorkspace, it provides onHost, onHosts, modHost, and modHosts layout modifiers. It attempts to do smart hostname comparison, such that short names will be matched with short names and FQDNs with FQDNs. This module currently requires that $HOST be set in the environment. You can use System.Posix.Env.setEnv to do so in xmonad.hs if need be. (Properly, this should be done via the network library, but I'm trying to avoid adding that dependency.) An alternative would be to shell out to get the name, but that has considerable portability hurdles. ] [Bump version to 0.10.1 Adam Vogt **20120320005311 Ignore-this: f0608ffaa877f605eaa86c45a107a14d Raising the X11 dependency while keeping the xmonad version the same leads to problems where cabal install uses the dependency versions following hackage, not what is installed. ] [narrower BorderResize rectangles placed within border edges Jens Petersen **20120314064703 Ignore-this: 3a43bbdb7f2317d702edafb231f58802 Change the border resize rectangles to be narrower and only extend inside the window not outside. Most window managers just seem to use the border decoration area for starting resizes which is often just 1 pixel wide but as a compromise the width is now 2 pixels (before it was 10!). The rectangles are now placed symmetrically within the border and window. This seems to work ok with PositionStoreFloat for the Bluetile config. ] [add-dynamic-bars-module Ben Boeckel **20120316002204 Ignore-this: 41347c8f894d8d0b5095dfad86784cf4 This adds the X.H.DynamicBars module. It allows per-screen status bars to be easily managed and dynamically handles the number of screens changing. ] [bump X11 dependency so that noModMask is available Daniel Wagner **20120316000302 Ignore-this: 971a75dcad25f66848eef4174cd4ddd1 ] [Paste.hs: rm noModMask, shifted definition to X11 binding (see previous email) gwern0@gmail.com**20111203203038 Ignore-this: dcd164ff8f8f135c8fdef08f42f9244d ] [GroupNavigation: fix import typo in usage Jens Petersen **20120312103349 Ignore-this: 65367218ca50a33a37813469b4616f34 ] [add sendToEmptyWorkspace to FindEmptyWorkspace Jens Petersen **20120312102331 Ignore-this: 50e7992d80d2db43e4d0adf5c95e964f sendToEmptyWorkspace is like tagToEmptyWorkspace except it does not change workspace after moving the window. ] [xmonad-contrib.cabal: simplify xmonad dependency to >=0.10 && < 0.11 Jens Petersen **20120312101800 Ignore-this: 1ff5a0caa2a1e3487e9a0831e385b3d2 Unless there is a particular reason for listing the lower and upper bounds separately then this seems simpler and cleaner. ] [ShowWName: Increase horizontal padding for flash crodjer@gmail.com**20120305164517 Ignore-this: de5fd30fad2630875c5c78091f07c324 Currently the flash window width leaves a very small amount of padding. This patch adds some extra horizontal width, governed by text width and length. ] [persist-togglehook-options Ben Boeckel **20120311050143 Ignore-this: 580bacb35b617c1198f01c5a7c0d3fef Save the state of ToggleHook options over a restart. ] [ShowWName flash window background color Rohan Jain **20120306065224 Ignore-this: 9cd8fcfc13cc326b9dcc79ef3cc21b26 While calling paintAndWrite for flash window, the background color from config should also be passed on as window background in addition to as text background color. Otherwise the window color gets set to the default black which shows up when text cannot span whole of the window. This issue becomes visible when the font size is considerably large or even in small size with truetype fonts. ] [ShowWName: Fix flash location by screen rectangle crodjer@gmail.com**20120305161240 Ignore-this: 83ec4cce2297efc6736a1fe55f44ee73 In case of using this hook with multiple monitors, the Tag flash was not following the screen's coordinates. This patch shifts the new window created for flash according to the Rectangle defined by the screen. ] [Fix typo in tabbed layout link for font utils docs crodjer@gmail.com**20120229070022 Ignore-this: 2f7e90269e08ce08264d7b1d05bb16f9 ] [L.WorkspaceDir: cleanup redundant {definitions,imports} Steffen Schuldenzucker **20120229112124 Ignore-this: 7a796b18a64e693e071e9ea3a6a01aa3 ] [fix L.WorkspaceDir special char handling: remove "echo -n" processing Steffen Schuldenzucker **20120227122004 Ignore-this: ab48687eb4c9018312089a13fd25ecd8 ] [Add BorderUrgencyHook to XMonad.Hooks.UrgencyHook allbery.b@gmail.com**20120225082616 Ignore-this: 9fac77914ff28a6e9eb830e8c9c7e21e BorderUrgencyHook is a new UrgencyHook usable with withUrgencyHook or withUrgencyHookC; it allows an urgent window to be given a different border color. This may not always work as intended, since UrgencyHook likes to assume that a window being visible is sufficient to disable urgency notification; but with suppressWhen = Never it may work well enough. There is a report that if a new window is created at the wrong time, the wrong window may be marked urgent somehow. I seem to once again be revealing bugs in underlying packages, although a quick examination of X.H.UrgencyHook doesn't seem to show any way for the wrong window to be selected. ] [Adding use case for namedScratchpad. nicolas.dudebout@gatech.edu**20120122235843 Ignore-this: 44201e82bcd708cd7098f060345400f1 ] [Actions.WindowGo: typo fix - trim 's' per cub.uanic https://code.google.com/p/xmonad/issues/detail?id=491 gwern0@gmail.com**20120116224244 Ignore-this: fb1d55c1b4609069c55f13523c091260 ] [XMonad.Actions.PhysicalScreens: fix typo spotted by Chris Pick gwern0@gmail.com**20120115223013 Ignore-this: eb73b33b07dc58a36d3aa00bc8ac31c2 ] [roll back previous incorrect fix Daniel Wagner **20120111214133 Ignore-this: 91496faef411e6ae3442498b528d119b ] [Extending: fix http://code.google.com/p/xmonad/issues/detail?id=490 gwern0@gmail.com**20120111211907 Ignore-this: 515afbed507c070d60ab547e98682f12 ] [another documentation patch: XMonadContrib.UpdatePointer -> XMonad.Actions.UpdatePointer Daniel Wagner **20120111211226 Ignore-this: 1444e4a3f20ba442602ef1811d0b32c7 ] [documentation patch, fixes issue 490 Daniel Wagner **20120111210832 Ignore-this: 8d899e15f9d1a657e9fc687e2f649f45 ] [X.H.EwmhDesktops note that fullscreenEventHook is not included in ewmh Adam Vogt **20120102211404 Ignore-this: 92f15fa93877c165158c8fbd24aa2360 Just a documentation fix (nomeata's suggestion at issue 339). ] [X.H.EwmhDesktops haddock formatting. Adam Vogt **20120102211203 Ignore-this: cfff985e4034e06a0fe27c52c9971901 ] [X.A.Navigation2D Norbert Zeh **20111208205842 Ignore-this: 3860cc71bfc08d99bd8279c2e0945186 This is a new module to support directional navigation across multiple screens. As such it is related to X.A.WindowNavigation and X.L.WindowNavigation, but it is more general. For a detailed discussion of the differences, see http://www.cs.dal.ca/~nzeh/xmonad/Navigation2D.pdf. ] [documentation patch: mention PostfixOperators Daniel Wagner **20111210234820 Ignore-this: 20a05b1f396f18a742346d6e3daea9a8 ] [P.Shell documentation and add missing unsafePrompt export Adam Vogt **20111207163951 Ignore-this: a03992ffdc9c1a0f5bfa6dafc453b587 Haddock (version 2.9.2 at least) does not attach documentation to any of a b or c when given: -- | documentation a,b,c :: X ] [Paste: 3 more escaped characters from alistra gwern0@gmail.com**20111129160335 Ignore-this: 46f5b86a25bcd2b26d2e07ed33ffad68 ] [unfuck X.U.Paste Daniel Wagner **20111129032331 Ignore-this: d450e23ca026143bb6ca9d744dcdd906 ] [XMonad.Util.Paste: +alistra's patch for fixing his pasting of things like email address (@) gwern0@gmail.com**20111128215648 Ignore-this: 4af1af27637fe056792aa4f3bb0403eb ] [XMonad.Util.Paste: rm myself from maintainer field; I don't know how to fix any of it even if I wanted gwern0@gmail.com**20111128213001 Ignore-this: 87a4996aaa5241428ccb13851c5eb455 ] [XMonad.Prompt.Shell: improve 'env' documentation to cover goodgrue's problem gwern0@gmail.com**20111127231507 Ignore-this: 7b652a280960cbdf99c236496ca091b0 ] [Fix spelling 'prefered' -> 'preferred'. Erik de Castro Lopo **20111125010229 Ignore-this: f2eac1728b5e023399188becf867a14d ] [Restore TrackFloating behavior to an earlier version. Adam Vogt **20111120045538 Ignore-this: 1a1367b4171c3ad23b0553766021629f Thanks for liskni_si for pressing the matter: without this change it is very broken, with the patch it is still not perfect but still useful. ] [Explicitly list test files in .cabal Adam Vogt **20111118232511 Ignore-this: ac48a0d388293cc6c771d676aaf142e3 In the future, require Cabal >= 1.6 to be able to just write tests/*.hs ] [TAG 0.10 Adam Vogt **20111118225640 Ignore-this: 8f81b175b902e985d584160fc41ab7d1 ] Patch bundle hash: 4e7d265544ac7842607fd8590b3991f46b9934aa