- ghc-commits - Haskell.org

[Git][ghc/ghc][wip/T23109] 53 commits: Consider `PromotedDataCon` in `tyConStupidTheta`
by Simon Peyton Jones (＠simonpj) 10 Jul '25

10 Jul '25

Simon Peyton Jones pushed to branch wip/T23109 at Glasgow Haskell Compiler / GHC Commits: 8d33d048 by Berk Özkütük at 2025-07-07T20:42:20-04:00 Consider `PromotedDataCon` in `tyConStupidTheta` Haddock checks data declarations for the stupid theta so as not to pretty-print them as empty contexts. Type data declarations end up as `PromotedDataCon`s by the time Haddock performs this check, causing a panic. This commit extends `tyConStupidTheta` so that it returns an empty list for `PromotedDataCon`s. This decision was guided by the fact that type data declarations never have data type contexts (see (R1) in Note [Type data declarations]). Fixes #25739. - - - - - a26243fd by Ryan Hendrickson at 2025-07-07T20:43:07-04:00 haddock: Document instances from other packages When attaching instances to `Interface`s, it isn't enough just to look for instances in the list of `Interface`s being processed. We also need to look in the modules on which they depend, including those outside of this package. Fixes #25147. Fixes #26079. - - - - - 0fb24420 by Rodrigo Mesquita at 2025-07-07T20:43:49-04:00 hadrian: Fallback logic for internal interpreter When determining whether to build the internal interpreter, the `make` build system had a fallback case for platforms not in the list of explicitly-supported operating systems and architectures. This fallback says we should try to build the internal interpreter if building dynamic GHC programs (if the architecture is unknown). Fixes #24098 - - - - - fe925bd4 by Ben Gamari at 2025-07-07T20:44:30-04:00 users-guide: Reference Wasm FFI section - - - - - 5856284b by Ben Gamari at 2025-07-07T20:44:30-04:00 users-guide: Fix too-short heading warning - - - - - a48dcdf3 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Reorganise documentation for allocate* functions Consolodate interface information into the .h file, keeping just implementation details in the .c file. Use Notes stlye in the .h file and refer to notes from the .c file. - - - - - de5b528c by Duncan Coutts at 2025-07-07T20:45:18-04:00 Introduce common utilities for allocating arrays The intention is to share code among the several places that do this already. - - - - - b321319d by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in Heap.c The CMM primop can now report heap overflow. - - - - - 1d557ffb by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in ThreadLabels.c Replacing a local utility. - - - - - e59a1430 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in Threads.c Replacing local open coded version. - - - - - 482df1c9 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Add exitHeapOverflow helper utility This will be useful with the array alloc functions, since unlike allocate/allocateMaybeFail, they do not come in two versions. So if it's not convenient to propagate failure, then one can use this. - - - - - 4d3ec8f9 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in Weak.c Also add a cpp macro CCS_SYSTEM_OR_NULL which does what it says. The benefit of this is that it allows us to referece CCS_SYSTEM even when we're not in PROFILING mode. That makes abstracting over profiling vs normal mode a lot easier. - - - - - 0c4f2fde by Duncan Coutts at 2025-07-07T20:45:18-04:00 Convert the array alloc primops to use the new array alloc utils - - - - - a3354ad9 by Duncan Coutts at 2025-07-07T20:45:18-04:00 While we're at it, add one missing 'likely' hint To a cmm primops that raises an exception, like the others now do. - - - - - 33b546bd by meooow25 at 2025-07-07T20:46:09-04:00 Keep scanl' strict in the head on rewrite `scanl'` forces elements to WHNF when the corresponding `(:)`s are forced. The rewrite rule for `scanl'` missed forcing the first element, which is fixed here with a `seq`. - - - - - 8a69196e by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 debugger/rts: Allow toggling step-in per thread The RTS global flag `rts_stop_next_breakpoint` globally sets the interpreter to stop at the immediate next breakpoint. With this commit, single step mode can additionally be set per thread in the TSO flag (TSO_STOP_NEXT_BREAKPOINT). Being able to toggle "stop at next breakpoint" per thread is an important requirement for implementing "stepping out" of a function in a multi-threaded context. And, more generally, having a per-thread flag for single-stepping paves the way for multi-threaded debugging. That said, when we want to enable "single step" mode for the whole interpreted program we still want to stop at the immediate next breakpoint, whichever thread it belongs to. That's why we also keep the global `rts_stop_next_breakpoint` flag, with `rts_enableStopNextBreakpointAll` and `rts_disableStopNextBreakpointAll` helpers. Preparation for #26042 - - - - - 73d3f864 by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 docs: Case continuation BCOs This commit documents a subtle interaction between frames for case BCOs and their parents frames. Namely, case continuation BCOs may refer to (non-local) variables that are part of the parent's frame. The note expanding a bit on these details is called [Case continuation BCOs] - - - - - d7aeddcf by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 debugger: Implement step-out feature Implements support for stepping-out of a function (aka breaking right after returning from a function) in the interactive debugger. It also introduces a GHCi command :stepout to step-out of a function being debugged in the interpreter. The feature is described as: Stop at the first breakpoint immediately after returning from the current function scope. Known limitations: because a function tail-call does not push a stack frame, if step-out is used inside of a function that was tail-called, execution will not be returned to its caller, but rather its caller's first non-tail caller. On the other hand, it means the debugger follows the more realistic execution of the program. In the following example: .. code-block:: none f = do a b <--- (1) set breakpoint then step in here c b = do ... d <--- (2) step-into this tail call d = do ... something <--- (3) step-out here ... Stepping-out will stop execution at the `c` invokation in `f`, rather than stopping at `b`. The key idea is simple: When step-out is enabled, traverse the runtime stack until a continuation BCO is found -- and enable the breakpoint heading that BCO explicitly using its tick-index. The details are specified in `Note [Debugger: Step-out]` in `rts/Interpreter.c`. Since PUSH_ALTS BCOs (representing case continuations) were never headed by a breakpoint (unlike the case alternatives they push), we introduced the BRK_ALTS instruction to allow the debugger to set a case continuation to stop at the breakpoint heading the alternative that is taken. This is further described in `Note [Debugger: BRK_ALTS]`. Fixes #26042 - - - - - 5d9adf51 by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 debugger: Filter step-out stops by SrcSpan To implement step-out, the RTS looks for the first continuation frame on the stack and explicitly enables its entry breakpoint. However, some continuations will be contained in the function from which step-out was initiated (trivial example is a case expression). Similarly to steplocal, we will filter the breakpoints at which the RTS yields to the debugger based on the SrcSpan. When doing step-out, only stop if the breakpoint is /not/ contained in the function from which we initiated it. This is especially relevant in monadic statements such as IO which is compiled to a long chain of case expressions. See Note [Debugger: Filtering step-out stops] - - - - - 7677adcc by Cheng Shao at 2025-07-08T07:40:29-04:00 compiler: make ModBreaks serializable - - - - - 14f67c6d by Rodrigo Mesquita at 2025-07-08T07:40:29-04:00 refactor: "Inspecting the session" moved from GHC Moved utilities for inspecting the session from the GHC module to GHC.Driver.Session.Inspect Purely a clean up - - - - - 9d3f484a by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Pass the HUG to readModBreaks, not HscEnv A minor cleanup. The associated history and setupBreakpoint functions are changed accordingly. - - - - - b595f713 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Move readModBreaks to GHC.Runtime.Interpreter With some small docs changes - - - - - d223227a by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Move interpreterProfiled to Interp.Types Moves interpreterProfiled and interpreterDynamic to GHC.Runtime.Interpreter.Types from GHC.Runtime.Interpreter. - - - - - 7fdd0a3d by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Don't import GHC in Debugger.Breakpoints Remove the top-level import GHC from GHC.Runtime.Debugger.Breakpoints This makes the module dependencies more granular and cleans up the qualified imports from the code. - - - - - 5e4da31b by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 refactor: Use BreakpointId in Core and Ifaces - - - - - 741ac3a8 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 stg2bc: Derive BcM via ReaderT StateT A small refactor that simplifies GHC.StgToByteCode by deriving-via the Monad instances for BcM. This is done along the lines of previous similar refactors like 72b54c0760bbf85be1f73c1a364d4701e5720465. - - - - - 0414fcc9 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 refact: Split InternalModBreaks out of ModBreaks There are currently two competing ways of referring to a Breakpoint: 1. Using the Tick module + Tick index 2. Using the Info module + Info index 1. The Tick index is allocated during desugaring in `mkModBreaks`. It is used to refer to a breakpoint associated to a Core Tick. For a given Tick module, there are N Ticks indexed by Tick index. 2. The Info index is allocated during code generation (in StgToByteCode) and uniquely identifies the breakpoints at runtime (and is indeed used to determine which breakpoint was hit at runtime). Why we need both is described by Note [Breakpoint identifiers]. For every info index we used to keep a `CgBreakInfo`, a datatype containing information relevant to ByteCode Generation, in `ModBreaks`. This commit splits out the `IntMap CgBreakInfo` out of `ModBreaks` into a new datatype `InternalModBreaks`. - The purpose is to separate the `ModBreaks` datatype, which stores data associated from tick-level information which is fixed after desugaring, from the unrelated `IntMap CgBreakInfo` information accumulated during bytecode generation. - We move `ModBreaks` to GHC.HsToCore.Breakpoints The new `InternalModBreaks` simply combines the `IntMap CgBreakInfo` with `ModBreaks`. After code generation we construct an `InternalModBreaks` with the `CgBreakInfo`s we accumulated and the existing `ModBreaks` and store that in the compiled BCO in `bc_breaks`. - Note that we previously only updated the `modBreaks_breakInfo` field of `ModBreaks` at this exact location, and then stored the updated `ModBreaks` in the same `bc_breaks`. - We put this new datatype in GHC.ByteCode.Breakpoints The rest of the pipeline for which CgBreakInfo is relevant is accordingly updated to also use `InternalModBreaks` - - - - - 2a097955 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Use BreakpointIds in bytecode gen Small clean up to use BreakpointId and InternalBreakpointId more uniformly in bytecode generation rather than using Module + Ix pairs - - - - - 0515cc2f by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 ghci: Allocate BreakArrays at link time only Previously, a BreakArray would be allocated with a slot for every tick in a module at `mkModBreaks`, in HsToCore. However, this approach has a few downsides: - It interleaves interpreter behaviour (allocating arrays for breakpoints) within the desugarer - It is inflexible in the sense it is impossible for the bytecode generator to add "internal" breakpoints that can be triggered at runtime, because those wouldn't have a source tick. (This is relevant for our intended implementation plan of step-out in #26042) - It ties the BreakArray indices to the *tick* indexes, while at runtime we would rather just have the *info* indexes (currently we have both because BreakArrays are indexed by the *tick* one). Paving the way for #26042 and #26064, this commit moves the allocation of BreakArrays to bytecode-loading time -- akin to what is done for CCS arrays. Since a BreakArray is allocated only when bytecode is linked, if a breakpoint is set (e.g. `:break 10`) before the bytecode is linked, there will exist no BreakArray to trigger the breakpoint in. Therefore, the function to allocate break arrays (`allocateBreakArrays`) is exposed and also used in GHC.Runtime.Eval to allocate a break array when a breakpoint is set, if it doesn't exist yet (in the linker env). - - - - - 8016561f by Simon Peyton Jones at 2025-07-08T07:41:13-04:00 Add a test for T26176 - - - - - 454cd682 by Simon Peyton Jones at 2025-07-08T07:41:13-04:00 Add test for #14010 This test started to work in GHC 9.6 and has worked since. This MR just adds a regression test - - - - - ea2c6673 by Teo Camarasu at 2025-07-08T13:24:43-04:00 Implement user-defined allocation limit handlers Allocation Limits allow killing a thread if they allocate more than a user-specified limit. We extend this feature to allow more versatile behaviour. - We allow not killing the thread if the limit is exceeded. - We allow setting a custom handler to be called when the limit is exceeded. User-specified allocation limit handlers run in a fresh thread and are passed the ThreadId of the thread that exceeded its limit. We introduce utility functions for getting and setting the allocation limits of other threads, so that users can reset the limit of a thread from a handler. Both of these are somewhat coarse-grained as we are unaware of the allocations in the current nursery chunk. We provide several examples of usages in testsuite/tests/rts/T22859.hs Resolves #22859 - - - - - 03e047f9 by Simon Hengel at 2025-07-08T13:25:25-04:00 Fix typo in using.rst - - - - - 67957854 by Ben Gamari at 2025-07-09T09:44:44-04:00 compiler: Import AnnotationWrapper from ghc-internal Since `GHC.Desugar` exported from `base` has been deprecated. - - - - - 813d99d6 by Ben Gamari at 2025-07-09T09:44:44-04:00 ghc-compact: Eliminate dependency on ghc-prim - - - - - 0ec952a1 by Ben Gamari at 2025-07-09T09:44:44-04:00 ghc-heap: Eliminate dependency on ghc-prim - - - - - 480074c3 by Ben Gamari at 2025-07-09T09:44:44-04:00 ghc-heap: Drop redundant import - - - - - 03455829 by Ben Gamari at 2025-07-09T09:44:45-04:00 ghc-prim: Bump version to 0.13.1 There are no interface changes from 0.13.0 but the implementation now lives in `ghc-internal`. - - - - - d315345a by Ben Gamari at 2025-07-09T09:44:45-04:00 template-haskell: Bump version number to 2.24.0.0 Bumps exceptions submodule. - - - - - 004c800e by Ben Gamari at 2025-07-09T09:44:45-04:00 Bump GHC version number to 9.14 - - - - - eb1a3816 by Ben Gamari at 2025-07-09T09:44:45-04:00 Bump parsec to 3.1.18.0 Bumps parsec submodule. - - - - - 86f83296 by Ben Gamari at 2025-07-09T09:44:45-04:00 unix: Bump to 2.8.7.0 Bumps unix submodule. - - - - - 89e13998 by Ben Gamari at 2025-07-09T09:44:45-04:00 binary: Bump to 0.8.9.3 Bumps binary submodule. - - - - - 55fff191 by Ben Gamari at 2025-07-09T09:44:45-04:00 Win32: Bump to 2.14.2.0 Bumps Win32 submodule. - - - - - 7dafa40c by Ben Gamari at 2025-07-09T09:44:45-04:00 base: Bump version to 4.22.0 Bumps various submodules. - - - - - ef03d8b8 by Rodrigo Mesquita at 2025-07-09T09:45:28-04:00 base: Export displayExceptionWithInfo This function should be exposed from base following CLC#285 Approved change in CLC#344 Fixes #26058 - - - - - e73948d9 by Simon Peyton Jones at 2025-07-10T09:21:52+01:00 Make injecting implicit bindings into its own pass Previously we were injecting "impliicit bindings" (data constructor worker and wrappers etc) - both at the end of CoreTidy, - and at the start of CorePrep This is unpleasant and confusing. This patch puts it it its own pass, addImplicitBinds, which runs between the two. The function `GHC.CoreToStg.AddImplicitBinds.addImplicitBinds` now takes /all/ TyCons, not just the ones for algebraic data types. That change ripples through to - corePrepPgm - doCodeGen - byteCodeGen All take [TyCon] which includes all TyCons - - - - - 36488402 by Simon Peyton Jones at 2025-07-10T09:22:06+01:00 Implement unary classes The big change is described exhaustively in Note [Unary class magic] in GHC.Core.TyCon Other changes * We never unbox class dictionaries in worker/wrapper. This has been true for some time now, but the logic is now centralised in functions in GHC.Core.Opt.WorkWrap.Utils, namely `canUnboxTyCon`, and `canUnboxArg` See Note [Do not unbox class dictionaries] in GHC.Core.Opt.WorkWrap.Utils. * Refactored the `notWorthFloating` logic in GHc.Core.Opt.SetLevels. I can't remember if I actually changed any behaviour here, but if so it's only in a corner cases. * Fixed a bug in `GHC.Core.TyCon.isEnumerationTyCon`, which was wrongly returning True for (##). * Remove redundant Role argument to `liftCoSubstWithEx`. It was always Representational. * I refactored evidence generation in the constraint solver: * Made GHC.Tc.Types.Evidence contain better abstactions for evidence generation. * I deleted the file `GHC.Tc.Types.EvTerm` and merged its (small) contents elsewhere. It wasn't paying its way. * Made evidence for implicit parameters go via a proper abstraction. * Fix inlineBoringOk; see (IB6) in Note [inlineBoringOk] This fixes a slowdown in `countdownEffectfulDynLocal` in the `effectful` library. Smaller things * Rename `isDataTyCon` to `isBoxedDataTyCon`. * GHC.Core.Corecion.liftCoSubstWithEx was only called with Representational role, so I baked that into the function and removed the argument. * Get rid of `GHC.Core.TyCon.tyConSingleAlgDataCon_maybe` in favour of calling `not isNewTyCon` at the call sites; more explicit. * Refatored `GHC.Core.TyCon.isInjectiveTyCon`; but I don't think I changed its behaviour * Moved `decomposeIPPred` to GHC.Core.Predicate Compile time performance changes: geo. mean +0.1% minimum -6.8% maximum +14.4% The +14% one is in T21839c, where it seems that a bit more inlining is taking place. That seems acceptable; and the average change is small Metric Decrease: LargeRecord T12227 T16577 T21839r T5642 Metric Increase: T15164 T21839c T5321FD T5321Fun WWRec - - - - - 12489146 by Simon Peyton Jones at 2025-07-10T09:23:01+01:00 Renaming around predicate types .. we were (as it turned out) abstracting over type-class selectors in SPECIALISATION rules! - - - - - 4a6a73ca by Simon Peyton Jones at 2025-07-10T09:23:01+01:00 Small hacky fix to specUnfolding ...just using mkApps instead of mkCoreApps (This part is likely to change again in a future commit.) - - - - - e0c399db by Simon Peyton Jones at 2025-07-10T09:23:01+01:00 Slight improvement to pre/postInlineUnconditionally Avoids an extra simplifier iteration - - - - - 301eb7e7 by Simon Peyton Jones at 2025-07-10T09:23:01+01:00 Accept GHCi debugger output change @alt-romes says this is fine - - - - - 271 changed files: - compiler/GHC.hs - compiler/GHC/Builtin/Types.hs - compiler/GHC/Builtin/primops.txt.pp - compiler/GHC/ByteCode/Asm.hs - + compiler/GHC/ByteCode/Breakpoints.hs - compiler/GHC/ByteCode/InfoTable.hs - compiler/GHC/ByteCode/Instr.hs - compiler/GHC/ByteCode/Linker.hs - compiler/GHC/ByteCode/Types.hs - compiler/GHC/Core/Class.hs - compiler/GHC/Core/Coercion.hs - compiler/GHC/Core/DataCon.hs - compiler/GHC/Core/FVs.hs - compiler/GHC/Core/FamInstEnv.hs - compiler/GHC/Core/Lint.hs - compiler/GHC/Core/Make.hs - compiler/GHC/Core/Map/Expr.hs - compiler/GHC/Core/Opt/Arity.hs - compiler/GHC/Core/Opt/CprAnal.hs - compiler/GHC/Core/Opt/DmdAnal.hs - compiler/GHC/Core/Opt/OccurAnal.hs - compiler/GHC/Core/Opt/SetLevels.hs - compiler/GHC/Core/Opt/Simplify/Iteration.hs - compiler/GHC/Core/Opt/Simplify/Utils.hs - compiler/GHC/Core/Opt/WorkWrap/Utils.hs - compiler/GHC/Core/Ppr.hs - compiler/GHC/Core/Predicate.hs - compiler/GHC/Core/Subst.hs - compiler/GHC/Core/Tidy.hs - compiler/GHC/Core/TyCo/Rep.hs - compiler/GHC/Core/TyCon.hs - compiler/GHC/Core/Type.hs - compiler/GHC/Core/Unfold.hs - compiler/GHC/Core/Unfold/Make.hs - compiler/GHC/Core/Utils.hs - compiler/GHC/CoreToIface.hs - compiler/GHC/CoreToStg.hs - + compiler/GHC/CoreToStg/AddImplicitBinds.hs - compiler/GHC/CoreToStg/Prep.hs - compiler/GHC/Driver/Config.hs - compiler/GHC/Driver/Main.hs - + compiler/GHC/Driver/Session/Inspect.hs - compiler/GHC/HsToCore.hs - compiler/GHC/HsToCore/Binds.hs - compiler/GHC/HsToCore/Breakpoints.hs - compiler/GHC/HsToCore/Expr.hs - compiler/GHC/HsToCore/Foreign/Call.hs - compiler/GHC/HsToCore/Ticks.hs - compiler/GHC/Iface/Decl.hs - compiler/GHC/Iface/Syntax.hs - compiler/GHC/Iface/Tidy.hs - compiler/GHC/IfaceToCore.hs - compiler/GHC/Linker/Loader.hs - compiler/GHC/Linker/Types.hs - compiler/GHC/Rename/Module.hs - compiler/GHC/Runtime/Debugger/Breakpoints.hs - compiler/GHC/Runtime/Eval.hs - compiler/GHC/Runtime/Eval/Types.hs - compiler/GHC/Runtime/Interpreter.hs - compiler/GHC/Runtime/Interpreter/Types.hs - compiler/GHC/Stg/BcPrep.hs - compiler/GHC/Stg/FVs.hs - compiler/GHC/StgToByteCode.hs - compiler/GHC/StgToCmm.hs - compiler/GHC/StgToCmm/Prim.hs - compiler/GHC/StgToJS/Prim.hs - compiler/GHC/Tc/Errors.hs - compiler/GHC/Tc/Errors/Ppr.hs - compiler/GHC/Tc/Gen/Bind.hs - compiler/GHC/Tc/Gen/Expr.hs - compiler/GHC/Tc/Gen/Sig.hs - compiler/GHC/Tc/Gen/Splice.hs - compiler/GHC/Tc/Instance/Class.hs - compiler/GHC/Tc/Instance/Family.hs - compiler/GHC/Tc/Solver.hs - compiler/GHC/Tc/Solver/Default.hs - compiler/GHC/Tc/Solver/Dict.hs - compiler/GHC/Tc/Solver/Equality.hs - compiler/GHC/Tc/Solver/Monad.hs - compiler/GHC/Tc/Solver/Rewrite.hs - compiler/GHC/Tc/Solver/Solve.hs - compiler/GHC/Tc/TyCl.hs - compiler/GHC/Tc/TyCl/Build.hs - compiler/GHC/Tc/TyCl/Instance.hs - compiler/GHC/Tc/TyCl/PatSyn.hs - compiler/GHC/Tc/TyCl/Utils.hs - − compiler/GHC/Tc/Types/EvTerm.hs - compiler/GHC/Tc/Types/Evidence.hs - compiler/GHC/Tc/Utils/TcMType.hs - compiler/GHC/Tc/Utils/TcType.hs - − compiler/GHC/Types/Breakpoint.hs - compiler/GHC/Types/Demand.hs - compiler/GHC/Types/Id.hs - compiler/GHC/Types/Id/Make.hs - compiler/GHC/Types/RepType.hs - compiler/GHC/Types/Tickish.hs - compiler/GHC/Types/TyThing.hs - compiler/GHC/Types/Var.hs - compiler/GHC/Unit/Module/ModGuts.hs - compiler/ghc.cabal.in - configure.ac - docs/users_guide/exts/doandifthenelse.rst - docs/users_guide/exts/ffi.rst - docs/users_guide/ghci.rst - docs/users_guide/using.rst - ghc/GHCi/UI.hs - hadrian/src/Oracles/Flag.hs - hadrian/src/Rules/Generate.hs - hadrian/src/Settings/Builders/Cabal.hs - hadrian/src/Settings/Packages.hs - hadrian/src/Settings/Program.hs - libraries/Win32 - libraries/array - libraries/base/base.cabal.in - libraries/base/changelog.md - libraries/base/src/Control/Exception.hs - libraries/binary - libraries/deepseq - libraries/directory - libraries/exceptions - libraries/filepath - libraries/ghc-boot-th/ghc-boot-th.cabal.in - libraries/ghc-boot/ghc-boot.cabal.in - libraries/ghc-compact/GHC/Compact.hs - libraries/ghc-compact/GHC/Compact/Serialized.hs - libraries/ghc-compact/ghc-compact.cabal - libraries/ghc-experimental/ghc-experimental.cabal.in - + libraries/ghc-experimental/src/System/Mem/Experimental.hs - libraries/ghc-heap/GHC/Exts/Heap/Closures.hs - libraries/ghc-heap/GHC/Exts/Heap/FFIClosures_ProfilingDisabled.hsc - libraries/ghc-heap/GHC/Exts/Heap/FFIClosures_ProfilingEnabled.hsc - libraries/ghc-heap/GHC/Exts/Heap/Utils.hsc - libraries/ghc-heap/ghc-heap.cabal.in - libraries/ghc-heap/tests/parse_tso_flags.hs - libraries/ghc-internal/ghc-internal.cabal.in - + libraries/ghc-internal/src/GHC/Internal/AllocationLimitHandler.hs - libraries/ghc-internal/src/GHC/Internal/Exception/Type.hs - libraries/ghc-internal/src/GHC/Internal/List.hs - libraries/ghc-prim/changelog.md - libraries/ghc-prim/ghc-prim.cabal - + libraries/ghci/GHCi/Debugger.hs - libraries/ghci/GHCi/Message.hs - libraries/ghci/GHCi/Run.hs - libraries/ghci/ghci.cabal.in - libraries/haskeline - libraries/hpc - libraries/os-string - libraries/parsec - libraries/process - libraries/semaphore-compat - libraries/stm - libraries/template-haskell/template-haskell.cabal.in - libraries/terminfo - libraries/text - libraries/unix - + rts/AllocArray.c - + rts/AllocArray.h - rts/Disassembler.c - rts/Heap.c - rts/Interpreter.c - rts/Interpreter.h - rts/Prelude.h - rts/PrimOps.cmm - rts/RtsStartup.c - rts/RtsSymbols.c - rts/RtsUtils.c - rts/Schedule.c - rts/StgMiscClosures.cmm - rts/ThreadLabels.c - rts/Threads.c - rts/Weak.c - rts/external-symbols.list.in - rts/include/Rts.h - rts/include/rts/Bytecodes.h - rts/include/rts/Constants.h - rts/include/rts/prof/CCS.h - rts/include/rts/storage/Closures.h - rts/include/rts/storage/GC.h - rts/include/rts/storage/Heap.h - rts/include/rts/storage/TSO.h - rts/include/stg/MiscClosures.h - rts/rts.cabal - rts/sm/Storage.c - testsuite/tests/backpack/cabal/bkpcabal08/bkpcabal08.stdout - testsuite/tests/core-to-stg/T24124.stderr - testsuite/tests/count-deps/CountDepsAst.stdout - testsuite/tests/count-deps/CountDepsParser.stdout - testsuite/tests/deSugar/should_compile/T2431.stderr - testsuite/tests/dmdanal/should_compile/T16029.stdout - testsuite/tests/dmdanal/sigs/T21119.stderr - testsuite/tests/dmdanal/sigs/T21888.stderr - + testsuite/tests/ghci.debugger/scripts/T26042b.hs - + testsuite/tests/ghci.debugger/scripts/T26042b.script - + testsuite/tests/ghci.debugger/scripts/T26042b.stdout - + testsuite/tests/ghci.debugger/scripts/T26042c.hs - + testsuite/tests/ghci.debugger/scripts/T26042c.script - + testsuite/tests/ghci.debugger/scripts/T26042c.stdout - + testsuite/tests/ghci.debugger/scripts/T26042d.hs - + testsuite/tests/ghci.debugger/scripts/T26042d.script - + testsuite/tests/ghci.debugger/scripts/T26042d.stdout - + testsuite/tests/ghci.debugger/scripts/T26042e.hs - + testsuite/tests/ghci.debugger/scripts/T26042e.script - + testsuite/tests/ghci.debugger/scripts/T26042e.stdout - + testsuite/tests/ghci.debugger/scripts/T26042f.hs - + testsuite/tests/ghci.debugger/scripts/T26042f.script - + testsuite/tests/ghci.debugger/scripts/T26042f1.stderr - + testsuite/tests/ghci.debugger/scripts/T26042f1.stdout - + testsuite/tests/ghci.debugger/scripts/T26042f2.stdout - + testsuite/tests/ghci.debugger/scripts/T26042g.hs - + testsuite/tests/ghci.debugger/scripts/T26042g.script - + testsuite/tests/ghci.debugger/scripts/T26042g.stdout - testsuite/tests/ghci.debugger/scripts/all.T - testsuite/tests/ghci.debugger/scripts/break011.stdout - testsuite/tests/ghci.debugger/scripts/break024.stdout - testsuite/tests/indexed-types/should_compile/T2238.hs - + testsuite/tests/indexed-types/should_fail/T26176.hs - + testsuite/tests/indexed-types/should_fail/T26176.stderr - testsuite/tests/indexed-types/should_fail/all.T - testsuite/tests/interface-stability/base-exports.stdout - testsuite/tests/interface-stability/base-exports.stdout-javascript-unknown-ghcjs - testsuite/tests/interface-stability/base-exports.stdout-mingw32 - testsuite/tests/interface-stability/base-exports.stdout-ws-32 - testsuite/tests/interface-stability/ghc-experimental-exports.stdout - testsuite/tests/interface-stability/ghc-experimental-exports.stdout-mingw32 - testsuite/tests/interface-stability/ghc-prim-exports.stdout - testsuite/tests/interface-stability/ghc-prim-exports.stdout-mingw32 - testsuite/tests/numeric/should_compile/T15547.stderr - testsuite/tests/numeric/should_compile/T23907.stderr - testsuite/tests/roles/should_compile/Roles14.stderr - testsuite/tests/roles/should_compile/Roles3.stderr - testsuite/tests/roles/should_compile/Roles4.stderr - + testsuite/tests/rts/T22859.hs - + testsuite/tests/rts/T22859.stderr - testsuite/tests/rts/all.T - testsuite/tests/simplCore/should_compile/DataToTagFamilyScrut.stderr - testsuite/tests/simplCore/should_compile/T15205.stderr - testsuite/tests/simplCore/should_compile/T17366.stderr - testsuite/tests/simplCore/should_compile/T17966.stderr - testsuite/tests/simplCore/should_compile/T22309.stderr - testsuite/tests/simplCore/should_compile/T22375DataFamily.stderr - testsuite/tests/simplCore/should_compile/T23307.stderr - testsuite/tests/simplCore/should_compile/T23307a.stderr - testsuite/tests/simplCore/should_compile/T25389.stderr - testsuite/tests/simplCore/should_compile/T25713.stderr - testsuite/tests/simplCore/should_compile/T7360.stderr - testsuite/tests/simplStg/should_compile/T15226b.stderr - testsuite/tests/tcplugins/CtIdPlugin.hs - testsuite/tests/typecheck/should_compile/Makefile - testsuite/tests/typecheck/should_compile/T12763.stderr - + testsuite/tests/typecheck/should_compile/T14010.hs - testsuite/tests/typecheck/should_compile/T14774.stdout - testsuite/tests/typecheck/should_compile/T18406b.stderr - testsuite/tests/typecheck/should_compile/T18529.stderr - testsuite/tests/typecheck/should_compile/all.T - testsuite/tests/unboxedsums/unpack_sums_7.stdout - testsuite/tests/wasm/should_run/control-flow/LoadCmmGroup.hs - testsuite/tests/wasm/should_run/control-flow/RunWasm.hs - utils/haddock/CHANGES.md - utils/haddock/haddock-api/haddock-api.cabal - utils/haddock/haddock-api/src/Haddock/Interface/AttachInstances.hs - utils/haddock/haddock-api/src/Haddock/Interface/Create.hs - utils/haddock/haddock-api/src/Haddock/InterfaceFile.hs - utils/haddock/haddock-api/src/Haddock/Types.hs - utils/haddock/haddock-library/haddock-library.cabal - utils/haddock/haddock-test/haddock-test.cabal - utils/haddock/haddock-test/src/Test/Haddock/Config.hs - utils/haddock/haddock.cabal - utils/haddock/html-test/ref/Bug1004.html - + utils/haddock/html-test/ref/Bug25739.html - + utils/haddock/html-test/src/Bug25739.hs - utils/hsc2hs The diff was not included because it is too large. View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/2c0b59c57c4c28abcf62b838e56870… -- View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/2c0b59c57c4c28abcf62b838e56870… You're receiving this email because of your account on gitlab.haskell.org.

1 0

[Git][ghc/ghc][wip/warning-for-last-and-init] 83 commits: Improve redundant constraints for instance decls
by Bodigrim (＠Bodigrim) 09 Jul '25

09 Jul '25

Bodigrim pushed to branch wip/warning-for-last-and-init at Glasgow Haskell Compiler / GHC Commits: 19f20861 by Simon Peyton Jones at 2025-06-13T09:51:11-04:00 Improve redundant constraints for instance decls Addresses #25992, which showed that the default methods of an instance decl could make GHC fail to report redundant constraints. Figuring out how to do this led me to refactor the computation of redundant constraints. See the entirely rewritten Note [Tracking redundant constraints] in GHC.Tc.Solver.Solve - - - - - 1d02798e by Matthew Pickering at 2025-06-13T09:51:54-04:00 Refactor the treatment of nested Template Haskell splices * The difference between a normal splice, a quasiquoter and implicit splice caused by lifting is stored in the AST after renaming. * Information that the renamer learns about splices is stored in the relevant splice extension points (XUntypedSpliceExpr, XQuasiQuote). * Normal splices and quasi quotes record the flavour of splice (exp/pat/dec etc) * Implicit lifting stores information about why the lift was attempted, so if it fails, that can be reported to the user. * After renaming, the decision taken to attempt to implicitly lift a variable is stored in the `XXUntypedSplice` extension field in the `HsImplicitLiftSplice` constructor. * Since all the information is stored in the AST, in `HsUntypedSplice`, the type of `PendingRnSplice` now just stores a `HsUntypedSplice`. * Error messages since the original program can be easily printed, this is noticeable in the case of implicit lifting. * The user-written syntax is directly type-checked. Before, some desugaring took place in the * Fixes .hie files to work better with nested splices (nested splices are not indexed) * The location of the quoter in a quasiquote is now located, so error messages will precisely point to it (and again, it is indexed by hie files) In the future, the typechecked AST should also retain information about the splices and the specific desugaring being left to the desugarer. Also, `runRnSplice` should call `tcUntypedSplice`, otherwise the typechecking logic is duplicated (see the `QQError` and `QQTopError` tests for a difference caused by this). - - - - - f93798ba by Cheng Shao at 2025-06-13T09:52:35-04:00 libffi: update to 3.5.1 Bumps libffi submodule. - - - - - c7aa0c10 by Andreas Klebinger at 2025-06-15T05:47:24-04:00 Revert "Specialise: Don't float out constraint components." This reverts commit c9abb87ccc0c91cd94f42b3e36270158398326ef. Turns out two benchmarks from #19747 regresses by a factor of 7-8x if we do not float those out. - - - - - fd998679 by Krzysztof Gogolewski at 2025-06-15T05:48:06-04:00 Fix EPT enforcement when mixing unboxed tuples and non-tuples The code was assuming that an alternative cannot be returning a normal datacon and an unboxed tuple at the same time. However, as seen in #26107, this can happen when using a GADT to refine the representation type. The solution is just to conservatively return TagDunno. - - - - - e64b3f16 by ARATA Mizuki at 2025-06-17T10:13:42+09:00 MachRegs.h: Don't define NO_ARG_REGS when a XMM register is defined On i386, MAX_REAL_VANILLA_REG is 1, but MAX_REAL_XMM_REG is 4. If we define NO_ARG_REGS on i386, programs that use SIMD vectors may segfault. Closes #25985 A couple of notes on the BROKEN_TESTS field: * This fixes the segfault from T25062_V16. * The failure from T22187_run was fixed in an earlier commit (see #25561), but BROKEN_TESTS was missed at that time. Now should be a good time to mark it fixed. - - - - - 3e7c6b4d by Matthew Pickering at 2025-06-18T15:34:04-04:00 Improve error messages when implicit lifting fails This patch concerns programs which automatically try to fix level errors by inserting `Lift`. For example: ``` foo x = [| x |] ~> foo x = [| $(lift x) |] ``` Before, there were two problems with the message. 1. (#26031), the location of the error was reported as the whole quotation. 2. (#26035), the message just mentions there is no Lift instance, but gives no indicate why the user program needed a Lift instance in the first place. This problem is especially bad when you disable `ImplicitStagePersistence`, so you just end up with a confusing "No instance for" message rather than an error message about levels This patch fixes both these issues. Firstly, `PendingRnSplice` differentiates between a user-written splice and an implicit lift. Then, the Lift instance is precisely requested with a specific origin in the typechecker. If the instance fails to be solved, the message is reported using the `TcRnBadlyLevelled` constructor (like a normal level error). Fixes #26031, #26035 - - - - - 44b8cee2 by Cheng Shao at 2025-06-18T15:34:46-04:00 testsuite: add T26120 marked as broken - - - - - 894a04f3 by Cheng Shao at 2025-06-18T15:34:46-04:00 compiler: fix GHC.SysTools.Ar archive member size writing logic This patch fixes a long-standing bug in `GHC.SysTools.Ar` that emits the wrong archive member size in each archive header. It should encode the exact length of the member payload, excluding any padding byte, otherwise malformed archive that extracts a broken object with an extra trailing byte could be created. Apart from the in-tree `T26120` test, I've also created an out-of-tree testsuite at https://github.com/TerrorJack/ghc-ar-quickcheck that contains QuickCheck roundtrip tests for `GHC.SysTools.Ar`. With this fix, simple roundtrip tests and `writeGNUAr`/GNU `ar` roundtrip test passes. There might be more bugs lurking in here, but this patch is still a critical bugfix already. Fixes #26120 #22586. Co-authored-by: Codex <codex(a)openai.com> - - - - - f677ab5f by Lauren Yim at 2025-06-18T15:35:37-04:00 fix some typos in the warnings page in the user guide - - - - - b968e1c1 by Rodrigo Mesquita at 2025-06-18T15:36:18-04:00 Add a frozen callstack to throwGhcException Fixes #25956 - - - - - a5e0c3a3 by fendor at 2025-06-18T15:36:59-04:00 Update using.rst to advertise full mhu support for GHCi - - - - - d3e60e97 by Ryan Scott at 2025-06-18T22:29:21-04:00 Deprecate -Wdata-kinds-tc, make DataKinds issues in typechecker become errors !11314 introduced the `-Wdata-kinds-tc` warning as part of a fix for #22141. This was a temporary stopgap measure to allow users who were accidentally relying on code which needed the `DataKinds` extension in order to typecheck without having to explicitly enable the extension. Now that some amount of time has passed, this patch deprecates `-Wdata-kinds-tc` and upgrades any `DataKinds`-related issues in the typechecker (which were previously warnings) into errors. - - - - - fd5b5177 by Ryan Hendrickson at 2025-06-18T22:30:06-04:00 haddock: Add redact-type-synonyms pragma `{-# OPTIONS_HADDOCK redact-type-synonyms #-}` pragma will hide the RHS of type synonyms, and display the result kind instead, if the RHS contains any unexported types. - - - - - fbc0b92a by Vladislav Zavialov at 2025-06-22T04:25:16+03:00 Visible forall in GADTs (#25127) Add support for visible dependent quantification `forall a -> t` in types of data constructors, e.g. data KindVal a where K :: forall k. forall (a::k) -> -- now allowed! k -> KindVal a For details, see docs/users_guide/exts/required_type_arguments.rst, which has gained a new subsection. DataCon in compiler/GHC/Core/DataCon.hs --------------------------------------- The main change in this patch is that DataCon, the Core representation of a data constructor, now uses a different type to store user-written type variable binders: - dcUserTyVarBinders :: [InvisTVBinder] + dcUserTyVarBinders :: [TyVarBinder] where type TyVarBinder = VarBndr TyVar ForAllTyFlag type InvisTVBinder = VarBndr TyVar Specificity and data Specificity = InferredSpec | SpecifiedSpec data ForAllTyFlag = Invisible Specificity | Required This change necessitates some boring, mechanical changes scattered throughout the diff: ... is now used in place of ... -----------------+--------------- TyVarBinder | InvisTVBinder IfaceForAllBndr | IfaceForAllSpecBndr Specified | SpecifiedSpec Inferred | InferredSpec mkForAllTys | mkInvisForAllTys additionally, tyVarSpecToBinders -- added or removed calls ifaceForAllSpecToBndrs -- removed calls Visibility casts in mkDataConRep -------------------------------- Type abstractions in Core (/\a. e) always have type (forall a. t) because coreTyLamForAllTyFlag = Specified. This is also true of data constructor workers. So we may be faced with the following: data con worker: (forall a. blah) data con wrapper: (forall a -> blah) In this case the wrapper must use a visibility cast (e |> ForAllCo ...) with appropriately set fco_vis{L,R}. Relevant functions: mkDataConRep in compiler/GHC/Types/Id/Make.hs dataConUserTyVarBindersNeedWrapper in compiler/GHC/Core/DataCon.hs mkForAllVisCos in compiler/GHC/Core/Coercion.hs mkCoreTyLams in compiler/GHC/Core/Make.hs mkWpForAllCast in compiler/GHC/Tc/Types/Evidence.hs More specifically: - dataConUserTyVarBindersNeedWrapper has been updated to answer "yes" if there are visible foralls in the type of the data constructor. - mkDataConRep now uses mkCoreTyLams to generate the big lambda abstractions (/\a b c. e) in the data con wrapper. - mkCoreTyLams is a variant of mkCoreLams that applies visibility casts as needed. It similar in purpose to the pre-existing mkWpForAllCast, so the common bits have been factored out into mkForAllVisCos. ConDecl in compiler/Language/Haskell/Syntax/Decls.hs ---------------------------------------------------- The surface syntax representation of a data constructor declaration is ConDecl. In accordance with the proposal, only GADT syntax is extended with support for visible forall, so we are interested in ConDeclGADT. ConDeclGADT's field con_bndrs has been renamed to con_outer_bndrs and is now accompanied by con_inner_bndrs: con_outer_bndrs :: XRec pass (HsOuterSigTyVarBndrs pass) con_inner_bndrs :: [HsForAllTelescope pass] Visible foralls always end up in con_inner_bndrs. The outer binders are stored and processed separately to support implicit quantification and the forall-or-nothing rule, a design established by HsSigType. A side effect of this change is that even in absence of visible foralls, GHC now permits multiple invisible foralls, e.g. data T a where { MkT :: forall a b. forall c d. ... -> T a } But of course, this is done in service of making at least some of these foralls visible. The entire compiler front-end has been updated to deal with con_inner_bndrs. See the following modified or added functions: Parser: mkGadtDecl in compiler/GHC/Parser/PostProcess.hs splitLHsGadtTy in compiler/GHC/Hs/Type.hs Pretty-printer: pprConDecl in compiler/GHC/Hs/Decls.hs pprHsForAllTelescope in compiler/GHC/Hs/Type.hs Renamer: rnConDecl in compiler/GHC/Rename/Module.hs bindHsForAllTelescopes in compiler/GHC/Rename/HsType.hs extractHsForAllTelescopes in compiler/GHC/Rename/HsType.hs Type checker: tcConDecl in compiler/GHC/Tc/TyCl.hs tcGadtConTyVarBndrs in compiler/GHC/Tc/Gen/HsType.hs Template Haskell ---------------- The TH AST is left unchanged for the moment to avoid breakage. An attempt to quote or reify a data constructor declaration with visible forall in its type will result an error: data ThRejectionReason -- in GHC/HsToCore/Errors/Types.hs = ... | ThDataConVisibleForall -- new error constructor However, as noted in the previous section, GHC now permits multiple invisible foralls, and TH was updated accordingly. Updated code: repC in compiler/GHC/HsToCore/Quote.hs reifyDataCon in compiler/GHC/Tc/Gen/Splice.hs ppr @Con in libraries/ghc-boot-th/GHC/Boot/TH/Ppr.hs Pattern matching ---------------- Everything described above concerns data constructor declarations, but what about their use sites? Now it is trickier to type check a pattern match fn(Con a b c)=... because we can no longer assume that a,b,c are all value arguments. Indeed, some or all of them may very well turn out to be required type arguments. To that end, see the changes to: tcDataConPat in compiler/GHC/Tc/Gen/Pat.hs splitConTyArgs in compiler/GHC/Tc/Gen/Pat.hs and the new helpers split_con_ty_args, zip_pats_bndrs. This is also the reason the TcRnTooManyTyArgsInConPattern error constructor has been removed. The new code emits TcRnArityMismatch or TcRnIllegalInvisibleTypePattern. Summary ------- DataCon, ConDecl, as well as all related functions have been updated to support required type arguments in data constructors. Test cases: HieGadtConSigs GadtConSigs_th_dump1 GadtConSigs_th_pprint1 T25127_data T25127_data_inst T25127_infix T25127_newtype T25127_fail_th_quote T25127_fail_arity TyAppPat_Tricky Co-authored-by: mniip <mniip(a)mniip.com> - - - - - ae003a3a by Teo Camarasu at 2025-06-23T05:21:48-04:00 linters: lint-whitespace: bump upper-bound for containers The version of containers was bumped in https://gitlab.haskell.org/ghc/ghc/-/merge_requests/13989 - - - - - 0fb37893 by Matthew Pickering at 2025-06-23T13:55:10-04:00 Move ModuleGraph into UnitEnv The ModuleGraph is a piece of information associated with the ExternalPackageState and HomeUnitGraph. Therefore we should store it inside the HomeUnitEnv. - - - - - 3bf6720e by soulomoon at 2025-06-23T13:55:52-04:00 Remove hptAllFamInstances usage during upsweep Fixes #26118 This change eliminates the use of hptAllFamInstances during the upsweep phase, as it could access non-below modules from the home package table. The following updates were made: * Updated checkFamInstConsistency to accept an explicit ModuleEnv FamInstEnv parameter and removed the call to hptAllFamInstances. * Adjusted hugInstancesBelow so we can construct ModuleEnv FamInstEnv from its result, * hptAllFamInstances and allFamInstances functions are removed. - - - - - 83ee7b78 by Ben Gamari at 2025-06-24T05:02:07-04:00 configure: Don't force value of OTOOL, etc. if not present Previously if `otool` and `install_name_tool` were not present they would be overridden by `fp_settings.m4`. This logic was introduced in 4ff93292243888545da452ea4d4c1987f2343591 without explanation. - - - - - 9329c9e1 by Ben Gamari at 2025-06-24T05:02:07-04:00 ghc-toolchain: Add support for otool, install_name_tool Fixes part of ghc#23675. - - - - - 25f5c998 by Ben Gamari at 2025-06-24T05:02:08-04:00 ghc-toolchain: Add support for llc, opt, llvm-as Fixes #23675. - - - - - 51d150dd by Rodrigo Mesquita at 2025-06-24T05:02:08-04:00 hadrian: Use settings-use-distro-mingw directly The type `ToolchainSetting` only made sense when we had more settings to fetch from the system config file. Even then "settings-use-distro-mingw" is arguably not a toolchain setting. With the fix for #23675, all toolchain tools were moved to the `ghc-toolchain` `Toolchain` format. Therefore, we can inline `settings-use-distro-mingw` accesses and delete `ToolchainSetting`. - - - - - dcf68a83 by Rodrigo Mesquita at 2025-06-24T05:02:08-04:00 configure: Check LlvmTarget exists for LlvmAsFlags If LlvmTarget was empty, LlvmAsFlags would be just "--target=". If it is empty now, simply keep LlvmAsFlags empty. ghc-toolchain already does this right. This fix makes the two configurations match up. - - - - - 580a3353 by Ben Gamari at 2025-06-24T05:02:51-04:00 rts/linker/LoadArchive: Use bool Improve type precision by using `bool` instead of `int` and `StgBool`. - - - - - 76d1041d by Ben Gamari at 2025-06-24T05:02:51-04:00 rts/linker/LoadArchive: Don't rely on file extensions for identification Previously archive members would be identified via their file extension, as described in #13103. We now instead use a more principled approach, relying on the magic number in the member's header. As well, we refactor treatment of archive format detection to improve code clarity and error handling. Closes #13103. - - - - - 4b748a99 by Teo Camarasu at 2025-06-24T15:31:07-04:00 template-haskell: improve changelog stable -> more stable, just to clarify that this interface isn't fully stable. errornously -> mistakenly: I typod this and also let's go for a simpler word - - - - - e358e477 by Sylvain Henry at 2025-06-24T15:31:58-04:00 Bump stack resolver to use GHC 9.6.7 Cf #26139 - - - - - 4bf5eb63 by fendor at 2025-06-25T17:05:43-04:00 Teach `:reload` about multiple home units `:reload` needs to lookup the `ModuleName` and must not assume the given `ModuleName` is in the current `HomeUnit`. We add a new utility function which allows us to find a `HomeUnitModule` instead of a `Module`. Further, we introduce the `GhciCommandError` type which can be used to abort the execution of a GHCi command. This error is caught and printed in a human readable fashion. - - - - - b3d97bb3 by fendor at 2025-06-25T17:06:25-04:00 Implement `-fno-load-initial-targets` flag We add the new flag `-fno-load-initial-targets` which doesn't load all `Target`s immediately but only computes the module graph for all `Target`s. The user can then decide to load modules from that module graph using the syntax: ghci> :reload <Mod> This will load everything in the module graph up to `Mod`. The user can return to the initial state by using the builtin target `none` to unload all modules. ghci> :reload none Is in principle identical to starting a new session with the `-fno-load-initial-targets` flag. The `-fno-load-initial-targets` flag allows for faster startup time of GHCi when a user has lots of `Target`s. We additionally extend the `:reload` command to accept multiple `ModuleName`s. For example: ghci> :reload <Mod1> <Mod2> Loads all modules up to the modules `Mod1` and `Mod2`. - - - - - 49f44e52 by Teo Camarasu at 2025-06-26T04:19:51-04:00 Expose ghc-internal unit id through the settings file This in combination with the unit id of the compiler library allows cabal to know of the two unit ids that should not be reinstalled (in specific circumstances) as: - when using plugins, we want to link against exactly the compiler unit id - when using TemplateHaskell we want to link against exactly the package that contains the TemplateHaskell interfaces, which is `ghc-internal` See: <https://github.com/haskell/cabal/issues/10087> Resolves #25282 - - - - - 499c4efe by Bryan Richter at 2025-06-26T04:20:33-04:00 CI: Fix and clean up capture of timings * Fixes the typo that caused 'cat ci-timings' to report "no such file or directory" * Gave ci_timings.txt a file extension so it may play better with other systems * Fixed the use of time_it so all times are recorded * Fixed time_it to print name along with timing - - - - - 86c90c9e by Bryan Richter at 2025-06-26T04:20:33-04:00 CI: Update collapsible section usage The syntax apparently changed at some point. - - - - - 04308ee4 by Bryan Richter at 2025-06-26T04:20:33-04:00 CI: Add more collapsible sections - - - - - 43b606bb by Florian Ragwitz at 2025-06-27T16:31:26-04:00 Tick uses of wildcard/pun field binds as if using the record selector function Fixes #17834. See Note [Record-selector ticks] for additional reasoning behind this as well as an overview of the implementation details and future improvements. - - - - - d4952549 by Ben Gamari at 2025-06-27T16:32:08-04:00 testsuite/caller-cc: Make CallerCc[123] less sensitive These were previously sensitive to irrelevant changes in program structure. To avoid this we filter out all by lines emitted by the -fcaller-cc from the profile. - - - - - 8d33d048 by Berk Özkütük at 2025-07-07T20:42:20-04:00 Consider `PromotedDataCon` in `tyConStupidTheta` Haddock checks data declarations for the stupid theta so as not to pretty-print them as empty contexts. Type data declarations end up as `PromotedDataCon`s by the time Haddock performs this check, causing a panic. This commit extends `tyConStupidTheta` so that it returns an empty list for `PromotedDataCon`s. This decision was guided by the fact that type data declarations never have data type contexts (see (R1) in Note [Type data declarations]). Fixes #25739. - - - - - a26243fd by Ryan Hendrickson at 2025-07-07T20:43:07-04:00 haddock: Document instances from other packages When attaching instances to `Interface`s, it isn't enough just to look for instances in the list of `Interface`s being processed. We also need to look in the modules on which they depend, including those outside of this package. Fixes #25147. Fixes #26079. - - - - - 0fb24420 by Rodrigo Mesquita at 2025-07-07T20:43:49-04:00 hadrian: Fallback logic for internal interpreter When determining whether to build the internal interpreter, the `make` build system had a fallback case for platforms not in the list of explicitly-supported operating systems and architectures. This fallback says we should try to build the internal interpreter if building dynamic GHC programs (if the architecture is unknown). Fixes #24098 - - - - - fe925bd4 by Ben Gamari at 2025-07-07T20:44:30-04:00 users-guide: Reference Wasm FFI section - - - - - 5856284b by Ben Gamari at 2025-07-07T20:44:30-04:00 users-guide: Fix too-short heading warning - - - - - a48dcdf3 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Reorganise documentation for allocate* functions Consolodate interface information into the .h file, keeping just implementation details in the .c file. Use Notes stlye in the .h file and refer to notes from the .c file. - - - - - de5b528c by Duncan Coutts at 2025-07-07T20:45:18-04:00 Introduce common utilities for allocating arrays The intention is to share code among the several places that do this already. - - - - - b321319d by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in Heap.c The CMM primop can now report heap overflow. - - - - - 1d557ffb by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in ThreadLabels.c Replacing a local utility. - - - - - e59a1430 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in Threads.c Replacing local open coded version. - - - - - 482df1c9 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Add exitHeapOverflow helper utility This will be useful with the array alloc functions, since unlike allocate/allocateMaybeFail, they do not come in two versions. So if it's not convenient to propagate failure, then one can use this. - - - - - 4d3ec8f9 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in Weak.c Also add a cpp macro CCS_SYSTEM_OR_NULL which does what it says. The benefit of this is that it allows us to referece CCS_SYSTEM even when we're not in PROFILING mode. That makes abstracting over profiling vs normal mode a lot easier. - - - - - 0c4f2fde by Duncan Coutts at 2025-07-07T20:45:18-04:00 Convert the array alloc primops to use the new array alloc utils - - - - - a3354ad9 by Duncan Coutts at 2025-07-07T20:45:18-04:00 While we're at it, add one missing 'likely' hint To a cmm primops that raises an exception, like the others now do. - - - - - 33b546bd by meooow25 at 2025-07-07T20:46:09-04:00 Keep scanl' strict in the head on rewrite `scanl'` forces elements to WHNF when the corresponding `(:)`s are forced. The rewrite rule for `scanl'` missed forcing the first element, which is fixed here with a `seq`. - - - - - 8a69196e by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 debugger/rts: Allow toggling step-in per thread The RTS global flag `rts_stop_next_breakpoint` globally sets the interpreter to stop at the immediate next breakpoint. With this commit, single step mode can additionally be set per thread in the TSO flag (TSO_STOP_NEXT_BREAKPOINT). Being able to toggle "stop at next breakpoint" per thread is an important requirement for implementing "stepping out" of a function in a multi-threaded context. And, more generally, having a per-thread flag for single-stepping paves the way for multi-threaded debugging. That said, when we want to enable "single step" mode for the whole interpreted program we still want to stop at the immediate next breakpoint, whichever thread it belongs to. That's why we also keep the global `rts_stop_next_breakpoint` flag, with `rts_enableStopNextBreakpointAll` and `rts_disableStopNextBreakpointAll` helpers. Preparation for #26042 - - - - - 73d3f864 by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 docs: Case continuation BCOs This commit documents a subtle interaction between frames for case BCOs and their parents frames. Namely, case continuation BCOs may refer to (non-local) variables that are part of the parent's frame. The note expanding a bit on these details is called [Case continuation BCOs] - - - - - d7aeddcf by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 debugger: Implement step-out feature Implements support for stepping-out of a function (aka breaking right after returning from a function) in the interactive debugger. It also introduces a GHCi command :stepout to step-out of a function being debugged in the interpreter. The feature is described as: Stop at the first breakpoint immediately after returning from the current function scope. Known limitations: because a function tail-call does not push a stack frame, if step-out is used inside of a function that was tail-called, execution will not be returned to its caller, but rather its caller's first non-tail caller. On the other hand, it means the debugger follows the more realistic execution of the program. In the following example: .. code-block:: none f = do a b <--- (1) set breakpoint then step in here c b = do ... d <--- (2) step-into this tail call d = do ... something <--- (3) step-out here ... Stepping-out will stop execution at the `c` invokation in `f`, rather than stopping at `b`. The key idea is simple: When step-out is enabled, traverse the runtime stack until a continuation BCO is found -- and enable the breakpoint heading that BCO explicitly using its tick-index. The details are specified in `Note [Debugger: Step-out]` in `rts/Interpreter.c`. Since PUSH_ALTS BCOs (representing case continuations) were never headed by a breakpoint (unlike the case alternatives they push), we introduced the BRK_ALTS instruction to allow the debugger to set a case continuation to stop at the breakpoint heading the alternative that is taken. This is further described in `Note [Debugger: BRK_ALTS]`. Fixes #26042 - - - - - 5d9adf51 by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 debugger: Filter step-out stops by SrcSpan To implement step-out, the RTS looks for the first continuation frame on the stack and explicitly enables its entry breakpoint. However, some continuations will be contained in the function from which step-out was initiated (trivial example is a case expression). Similarly to steplocal, we will filter the breakpoints at which the RTS yields to the debugger based on the SrcSpan. When doing step-out, only stop if the breakpoint is /not/ contained in the function from which we initiated it. This is especially relevant in monadic statements such as IO which is compiled to a long chain of case expressions. See Note [Debugger: Filtering step-out stops] - - - - - 7677adcc by Cheng Shao at 2025-07-08T07:40:29-04:00 compiler: make ModBreaks serializable - - - - - 14f67c6d by Rodrigo Mesquita at 2025-07-08T07:40:29-04:00 refactor: "Inspecting the session" moved from GHC Moved utilities for inspecting the session from the GHC module to GHC.Driver.Session.Inspect Purely a clean up - - - - - 9d3f484a by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Pass the HUG to readModBreaks, not HscEnv A minor cleanup. The associated history and setupBreakpoint functions are changed accordingly. - - - - - b595f713 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Move readModBreaks to GHC.Runtime.Interpreter With some small docs changes - - - - - d223227a by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Move interpreterProfiled to Interp.Types Moves interpreterProfiled and interpreterDynamic to GHC.Runtime.Interpreter.Types from GHC.Runtime.Interpreter. - - - - - 7fdd0a3d by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Don't import GHC in Debugger.Breakpoints Remove the top-level import GHC from GHC.Runtime.Debugger.Breakpoints This makes the module dependencies more granular and cleans up the qualified imports from the code. - - - - - 5e4da31b by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 refactor: Use BreakpointId in Core and Ifaces - - - - - 741ac3a8 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 stg2bc: Derive BcM via ReaderT StateT A small refactor that simplifies GHC.StgToByteCode by deriving-via the Monad instances for BcM. This is done along the lines of previous similar refactors like 72b54c0760bbf85be1f73c1a364d4701e5720465. - - - - - 0414fcc9 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 refact: Split InternalModBreaks out of ModBreaks There are currently two competing ways of referring to a Breakpoint: 1. Using the Tick module + Tick index 2. Using the Info module + Info index 1. The Tick index is allocated during desugaring in `mkModBreaks`. It is used to refer to a breakpoint associated to a Core Tick. For a given Tick module, there are N Ticks indexed by Tick index. 2. The Info index is allocated during code generation (in StgToByteCode) and uniquely identifies the breakpoints at runtime (and is indeed used to determine which breakpoint was hit at runtime). Why we need both is described by Note [Breakpoint identifiers]. For every info index we used to keep a `CgBreakInfo`, a datatype containing information relevant to ByteCode Generation, in `ModBreaks`. This commit splits out the `IntMap CgBreakInfo` out of `ModBreaks` into a new datatype `InternalModBreaks`. - The purpose is to separate the `ModBreaks` datatype, which stores data associated from tick-level information which is fixed after desugaring, from the unrelated `IntMap CgBreakInfo` information accumulated during bytecode generation. - We move `ModBreaks` to GHC.HsToCore.Breakpoints The new `InternalModBreaks` simply combines the `IntMap CgBreakInfo` with `ModBreaks`. After code generation we construct an `InternalModBreaks` with the `CgBreakInfo`s we accumulated and the existing `ModBreaks` and store that in the compiled BCO in `bc_breaks`. - Note that we previously only updated the `modBreaks_breakInfo` field of `ModBreaks` at this exact location, and then stored the updated `ModBreaks` in the same `bc_breaks`. - We put this new datatype in GHC.ByteCode.Breakpoints The rest of the pipeline for which CgBreakInfo is relevant is accordingly updated to also use `InternalModBreaks` - - - - - 2a097955 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Use BreakpointIds in bytecode gen Small clean up to use BreakpointId and InternalBreakpointId more uniformly in bytecode generation rather than using Module + Ix pairs - - - - - 0515cc2f by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 ghci: Allocate BreakArrays at link time only Previously, a BreakArray would be allocated with a slot for every tick in a module at `mkModBreaks`, in HsToCore. However, this approach has a few downsides: - It interleaves interpreter behaviour (allocating arrays for breakpoints) within the desugarer - It is inflexible in the sense it is impossible for the bytecode generator to add "internal" breakpoints that can be triggered at runtime, because those wouldn't have a source tick. (This is relevant for our intended implementation plan of step-out in #26042) - It ties the BreakArray indices to the *tick* indexes, while at runtime we would rather just have the *info* indexes (currently we have both because BreakArrays are indexed by the *tick* one). Paving the way for #26042 and #26064, this commit moves the allocation of BreakArrays to bytecode-loading time -- akin to what is done for CCS arrays. Since a BreakArray is allocated only when bytecode is linked, if a breakpoint is set (e.g. `:break 10`) before the bytecode is linked, there will exist no BreakArray to trigger the breakpoint in. Therefore, the function to allocate break arrays (`allocateBreakArrays`) is exposed and also used in GHC.Runtime.Eval to allocate a break array when a breakpoint is set, if it doesn't exist yet (in the linker env). - - - - - 8016561f by Simon Peyton Jones at 2025-07-08T07:41:13-04:00 Add a test for T26176 - - - - - 454cd682 by Simon Peyton Jones at 2025-07-08T07:41:13-04:00 Add test for #14010 This test started to work in GHC 9.6 and has worked since. This MR just adds a regression test - - - - - ea2c6673 by Teo Camarasu at 2025-07-08T13:24:43-04:00 Implement user-defined allocation limit handlers Allocation Limits allow killing a thread if they allocate more than a user-specified limit. We extend this feature to allow more versatile behaviour. - We allow not killing the thread if the limit is exceeded. - We allow setting a custom handler to be called when the limit is exceeded. User-specified allocation limit handlers run in a fresh thread and are passed the ThreadId of the thread that exceeded its limit. We introduce utility functions for getting and setting the allocation limits of other threads, so that users can reset the limit of a thread from a handler. Both of these are somewhat coarse-grained as we are unaware of the allocations in the current nursery chunk. We provide several examples of usages in testsuite/tests/rts/T22859.hs Resolves #22859 - - - - - 03e047f9 by Simon Hengel at 2025-07-08T13:25:25-04:00 Fix typo in using.rst - - - - - 67957854 by Ben Gamari at 2025-07-09T09:44:44-04:00 compiler: Import AnnotationWrapper from ghc-internal Since `GHC.Desugar` exported from `base` has been deprecated. - - - - - 813d99d6 by Ben Gamari at 2025-07-09T09:44:44-04:00 ghc-compact: Eliminate dependency on ghc-prim - - - - - 0ec952a1 by Ben Gamari at 2025-07-09T09:44:44-04:00 ghc-heap: Eliminate dependency on ghc-prim - - - - - 480074c3 by Ben Gamari at 2025-07-09T09:44:44-04:00 ghc-heap: Drop redundant import - - - - - 03455829 by Ben Gamari at 2025-07-09T09:44:45-04:00 ghc-prim: Bump version to 0.13.1 There are no interface changes from 0.13.0 but the implementation now lives in `ghc-internal`. - - - - - d315345a by Ben Gamari at 2025-07-09T09:44:45-04:00 template-haskell: Bump version number to 2.24.0.0 Bumps exceptions submodule. - - - - - 004c800e by Ben Gamari at 2025-07-09T09:44:45-04:00 Bump GHC version number to 9.14 - - - - - eb1a3816 by Ben Gamari at 2025-07-09T09:44:45-04:00 Bump parsec to 3.1.18.0 Bumps parsec submodule. - - - - - 86f83296 by Ben Gamari at 2025-07-09T09:44:45-04:00 unix: Bump to 2.8.7.0 Bumps unix submodule. - - - - - 89e13998 by Ben Gamari at 2025-07-09T09:44:45-04:00 binary: Bump to 0.8.9.3 Bumps binary submodule. - - - - - 55fff191 by Ben Gamari at 2025-07-09T09:44:45-04:00 Win32: Bump to 2.14.2.0 Bumps Win32 submodule. - - - - - 7dafa40c by Ben Gamari at 2025-07-09T09:44:45-04:00 base: Bump version to 4.22.0 Bumps various submodules. - - - - - ef03d8b8 by Rodrigo Mesquita at 2025-07-09T09:45:28-04:00 base: Export displayExceptionWithInfo This function should be exposed from base following CLC#285 Approved change in CLC#344 Fixes #26058 - - - - - dafc396a by Mike Pilgrem at 2025-07-10T00:24:06+01:00 Re CLC issue 292 Warn GHC.Internal.List.{init,last} are partial Also corrects the warning for `tail` to refer to `Data.List.uncons` (like the existing warning for `head`). In module `Settings.Warnings`, applies `-Wno-unrecognised-warning-flags` `-Wno-x-partial` to the `Cabal`, `filepath`, `hsc2hs`, `hpc`, `parsec`, `text` and `time` packages (outside GHC's repository). - - - - - 471 changed files: - .gitlab-ci.yml - .gitlab/ci.sh - .gitlab/common.sh - .gitlab/generate-ci/gen_ci.hs - .gitlab/jobs.yaml - compiler/GHC.hs - compiler/GHC/Builtin/Names/TH.hs - compiler/GHC/Builtin/Types.hs - compiler/GHC/Builtin/primops.txt.pp - compiler/GHC/ByteCode/Asm.hs - + compiler/GHC/ByteCode/Breakpoints.hs - compiler/GHC/ByteCode/Instr.hs - compiler/GHC/ByteCode/Linker.hs - compiler/GHC/ByteCode/Types.hs - compiler/GHC/Core/Coercion.hs - compiler/GHC/Core/ConLike.hs - compiler/GHC/Core/DataCon.hs - compiler/GHC/Core/DataCon.hs-boot - compiler/GHC/Core/FVs.hs - compiler/GHC/Core/Lint.hs - compiler/GHC/Core/Make.hs - compiler/GHC/Core/Map/Expr.hs - compiler/GHC/Core/Opt/OccurAnal.hs - compiler/GHC/Core/Opt/Pipeline.hs - compiler/GHC/Core/Opt/Simplify/Iteration.hs - compiler/GHC/Core/Opt/Specialise.hs - compiler/GHC/Core/PatSyn.hs - compiler/GHC/Core/Ppr.hs - compiler/GHC/Core/Subst.hs - compiler/GHC/Core/Tidy.hs - compiler/GHC/Core/TyCo/Ppr.hs - compiler/GHC/Core/TyCo/Rep.hs - compiler/GHC/Core/TyCon.hs - compiler/GHC/Core/Utils.hs - compiler/GHC/CoreToIface.hs - compiler/GHC/CoreToStg.hs - compiler/GHC/CoreToStg/Prep.hs - compiler/GHC/Driver/Backpack.hs - compiler/GHC/Driver/Config.hs - compiler/GHC/Driver/DynFlags.hs - compiler/GHC/Driver/Env.hs - compiler/GHC/Driver/Env/Types.hs - compiler/GHC/Driver/Flags.hs - compiler/GHC/Driver/Main.hs - compiler/GHC/Driver/Make.hs - compiler/GHC/Driver/Pipeline/Execute.hs - compiler/GHC/Driver/Session.hs - + compiler/GHC/Driver/Session/Inspect.hs - compiler/GHC/Driver/Session/Units.hs - compiler/GHC/Hs/Decls.hs - compiler/GHC/Hs/Expr.hs - compiler/GHC/Hs/Expr.hs-boot - compiler/GHC/Hs/Instances.hs - compiler/GHC/Hs/Pat.hs - compiler/GHC/Hs/Type.hs - compiler/GHC/HsToCore.hs - compiler/GHC/HsToCore/Breakpoints.hs - compiler/GHC/HsToCore/Errors/Ppr.hs - compiler/GHC/HsToCore/Errors/Types.hs - compiler/GHC/HsToCore/Quote.hs - compiler/GHC/HsToCore/Ticks.hs - compiler/GHC/Iface/Decl.hs - compiler/GHC/Iface/Ext/Ast.hs - compiler/GHC/Iface/Load.hs - compiler/GHC/Iface/Syntax.hs - compiler/GHC/Iface/Tidy.hs - compiler/GHC/IfaceToCore.hs - compiler/GHC/Linker/Loader.hs - compiler/GHC/Linker/Types.hs - compiler/GHC/Parser.y - compiler/GHC/Parser/Lexer.x - compiler/GHC/Parser/PostProcess.hs - compiler/GHC/Parser/PostProcess/Haddock.hs - compiler/GHC/Prelude/Basic.hs - compiler/GHC/Rename/Expr.hs - compiler/GHC/Rename/HsType.hs - compiler/GHC/Rename/Module.hs - compiler/GHC/Rename/Splice.hs - compiler/GHC/Runtime/Debugger/Breakpoints.hs - compiler/GHC/Runtime/Eval.hs - compiler/GHC/Runtime/Eval/Types.hs - compiler/GHC/Runtime/Interpreter.hs - compiler/GHC/Runtime/Interpreter/Types.hs - compiler/GHC/Stg/BcPrep.hs - compiler/GHC/Stg/EnforceEpt/Types.hs - compiler/GHC/Stg/FVs.hs - compiler/GHC/StgToByteCode.hs - compiler/GHC/StgToCmm/Prim.hs - compiler/GHC/StgToJS/Prim.hs - compiler/GHC/SysTools/Ar.hs - compiler/GHC/Tc/Errors.hs - compiler/GHC/Tc/Errors/Ppr.hs - compiler/GHC/Tc/Errors/Types.hs - compiler/GHC/Tc/Gen/App.hs - compiler/GHC/Tc/Gen/Expr.hs - compiler/GHC/Tc/Gen/Head.hs - compiler/GHC/Tc/Gen/HsType.hs - compiler/GHC/Tc/Gen/Match.hs - compiler/GHC/Tc/Gen/Pat.hs - compiler/GHC/Tc/Gen/Splice.hs - compiler/GHC/Tc/Gen/Splice.hs-boot - compiler/GHC/Tc/Instance/Family.hs - compiler/GHC/Tc/Module.hs - compiler/GHC/Tc/Solver/Default.hs - compiler/GHC/Tc/Solver/InertSet.hs - compiler/GHC/Tc/Solver/Monad.hs - compiler/GHC/Tc/Solver/Solve.hs - compiler/GHC/Tc/TyCl.hs - compiler/GHC/Tc/TyCl/Build.hs - compiler/GHC/Tc/TyCl/Instance.hs - compiler/GHC/Tc/TyCl/Utils.hs - compiler/GHC/Tc/Types/Constraint.hs - compiler/GHC/Tc/Types/ErrCtxt.hs - compiler/GHC/Tc/Types/Evidence.hs - compiler/GHC/Tc/Types/Origin.hs - compiler/GHC/Tc/Types/TH.hs - compiler/GHC/Tc/Utils/Concrete.hs - compiler/GHC/Tc/Utils/Instantiate.hs - compiler/GHC/Tc/Utils/TcMType.hs - compiler/GHC/Tc/Validity.hs - compiler/GHC/ThToHs.hs - − compiler/GHC/Types/Breakpoint.hs - compiler/GHC/Types/Error/Codes.hs - compiler/GHC/Types/Id/Make.hs - compiler/GHC/Types/Name/Reader.hs - compiler/GHC/Types/ThLevelIndex.hs - compiler/GHC/Types/Tickish.hs - compiler/GHC/Types/Var.hs-boot - compiler/GHC/Unit/Env.hs - compiler/GHC/Unit/Home/Graph.hs - compiler/GHC/Unit/Home/PackageTable.hs - compiler/GHC/Unit/Module/Graph.hs - compiler/GHC/Unit/Module/ModGuts.hs - compiler/GHC/Utils/Panic.hs - compiler/Language/Haskell/Syntax/Decls.hs - compiler/Language/Haskell/Syntax/Expr.hs - compiler/Language/Haskell/Syntax/Extension.hs - compiler/Language/Haskell/Syntax/Pat.hs - compiler/Setup.hs - compiler/ghc.cabal.in - configure.ac - distrib/configure.ac.in - docs/users_guide/9.14.1-notes.rst - docs/users_guide/exts/doandifthenelse.rst - docs/users_guide/exts/ffi.rst - docs/users_guide/exts/gadt_syntax.rst - docs/users_guide/exts/required_type_arguments.rst - docs/users_guide/ghci.rst - docs/users_guide/using-warnings.rst - docs/users_guide/using.rst - ghc/GHCi/UI.hs - ghc/GHCi/UI/Exception.hs - ghc/GHCi/UI/Print.hs - ghc/Main.hs - hadrian/cfg/default.host.target.in - hadrian/cfg/default.target.in - hadrian/cfg/system.config.in - hadrian/src/Builder.hs - hadrian/src/Oracles/Flag.hs - hadrian/src/Oracles/Setting.hs - hadrian/src/Rules/Generate.hs - hadrian/src/Settings/Builders/Cabal.hs - hadrian/src/Settings/Builders/RunTest.hs - hadrian/src/Settings/Packages.hs - hadrian/src/Settings/Program.hs - hadrian/stack.yaml - hadrian/stack.yaml.lock - libffi-tarballs - libraries/Win32 - libraries/array - libraries/base/base.cabal.in - libraries/base/changelog.md - libraries/base/src/Control/Exception.hs - libraries/binary - libraries/deepseq - libraries/directory - libraries/exceptions - libraries/filepath - libraries/ghc-boot-th/GHC/Boot/TH/Ppr.hs - libraries/ghc-boot-th/ghc-boot-th.cabal.in - libraries/ghc-boot/ghc-boot.cabal.in - libraries/ghc-compact/GHC/Compact.hs - libraries/ghc-compact/GHC/Compact/Serialized.hs - libraries/ghc-compact/ghc-compact.cabal - libraries/ghc-experimental/ghc-experimental.cabal.in - + libraries/ghc-experimental/src/System/Mem/Experimental.hs - libraries/ghc-heap/GHC/Exts/Heap/Closures.hs - libraries/ghc-heap/GHC/Exts/Heap/FFIClosures_ProfilingDisabled.hsc - libraries/ghc-heap/GHC/Exts/Heap/FFIClosures_ProfilingEnabled.hsc - libraries/ghc-heap/GHC/Exts/Heap/Utils.hsc - libraries/ghc-heap/ghc-heap.cabal.in - libraries/ghc-heap/tests/parse_tso_flags.hs - libraries/ghc-internal/ghc-internal.cabal.in - + libraries/ghc-internal/src/GHC/Internal/AllocationLimitHandler.hs - libraries/ghc-internal/src/GHC/Internal/Exception/Type.hs - libraries/ghc-internal/src/GHC/Internal/Float.hs - libraries/ghc-internal/src/GHC/Internal/List.hs - libraries/ghc-internal/src/GHC/Internal/System/IO.hs - libraries/ghc-internal/src/GHC/Internal/TH/Syntax.hs - libraries/ghc-prim/changelog.md - libraries/ghc-prim/ghc-prim.cabal - + libraries/ghci/GHCi/Debugger.hs - libraries/ghci/GHCi/Message.hs - libraries/ghci/GHCi/Run.hs - libraries/ghci/ghci.cabal.in - libraries/haskeline - libraries/hpc - libraries/os-string - libraries/parsec - libraries/process - libraries/semaphore-compat - libraries/stm - libraries/template-haskell/changelog.md - libraries/template-haskell/template-haskell.cabal.in - libraries/terminfo - libraries/text - libraries/unix - linters/lint-whitespace/lint-whitespace.cabal - m4/fp_settings.m4 - m4/ghc_toolchain.m4 - m4/prep_target_file.m4 - + rts/AllocArray.c - + rts/AllocArray.h - rts/Disassembler.c - rts/Heap.c - rts/Interpreter.c - rts/Interpreter.h - rts/Prelude.h - rts/PrimOps.cmm - rts/RtsStartup.c - rts/RtsSymbols.c - rts/RtsUtils.c - rts/Schedule.c - rts/StgMiscClosures.cmm - rts/ThreadLabels.c - rts/Threads.c - rts/Weak.c - rts/external-symbols.list.in - rts/include/Rts.h - rts/include/rts/Bytecodes.h - rts/include/rts/Constants.h - rts/include/rts/prof/CCS.h - rts/include/rts/storage/Closures.h - rts/include/rts/storage/GC.h - rts/include/rts/storage/Heap.h - rts/include/rts/storage/TSO.h - rts/include/stg/MachRegs.h - rts/include/stg/MiscClosures.h - rts/linker/LoadArchive.c - rts/rts.cabal - rts/sm/Storage.c - testsuite/tests/annotations/should_fail/annfail03.stderr - testsuite/tests/annotations/should_fail/annfail09.stderr - testsuite/tests/backpack/cabal/bkpcabal08/bkpcabal08.stdout - testsuite/tests/count-deps/CountDepsAst.stdout - testsuite/tests/count-deps/CountDepsParser.stdout - testsuite/tests/dependent/should_fail/T13135_simple.stderr - testsuite/tests/dependent/should_fail/T16326_Fail6.stderr - testsuite/tests/diagnostic-codes/codes.stdout - + testsuite/tests/ghc-api/T26120.hs - + testsuite/tests/ghc-api/T26120.stdout - testsuite/tests/ghc-api/all.T - testsuite/tests/ghc-e/should_fail/T18441fail5.stderr - + testsuite/tests/ghci.debugger/scripts/T26042b.hs - + testsuite/tests/ghci.debugger/scripts/T26042b.script - + testsuite/tests/ghci.debugger/scripts/T26042b.stdout - + testsuite/tests/ghci.debugger/scripts/T26042c.hs - + testsuite/tests/ghci.debugger/scripts/T26042c.script - + testsuite/tests/ghci.debugger/scripts/T26042c.stdout - + testsuite/tests/ghci.debugger/scripts/T26042d.hs - + testsuite/tests/ghci.debugger/scripts/T26042d.script - + testsuite/tests/ghci.debugger/scripts/T26042d.stdout - + testsuite/tests/ghci.debugger/scripts/T26042e.hs - + testsuite/tests/ghci.debugger/scripts/T26042e.script - + testsuite/tests/ghci.debugger/scripts/T26042e.stdout - + testsuite/tests/ghci.debugger/scripts/T26042f.hs - + testsuite/tests/ghci.debugger/scripts/T26042f.script - + testsuite/tests/ghci.debugger/scripts/T26042f1.stderr - + testsuite/tests/ghci.debugger/scripts/T26042f1.stdout - + testsuite/tests/ghci.debugger/scripts/T26042f2.stdout - + testsuite/tests/ghci.debugger/scripts/T26042g.hs - + testsuite/tests/ghci.debugger/scripts/T26042g.script - + testsuite/tests/ghci.debugger/scripts/T26042g.stdout - testsuite/tests/ghci.debugger/scripts/all.T - testsuite/tests/ghci/prog-mhu003/prog-mhu003.stderr - testsuite/tests/ghci/prog-mhu004/prog-mhu004a.stderr - + testsuite/tests/ghci/prog-mhu005/Makefile - + testsuite/tests/ghci/prog-mhu005/a/A.hs - + testsuite/tests/ghci/prog-mhu005/all.T - + testsuite/tests/ghci/prog-mhu005/b/B.hs - + testsuite/tests/ghci/prog-mhu005/prog-mhu005a.script - + testsuite/tests/ghci/prog-mhu005/prog-mhu005a.stderr - + testsuite/tests/ghci/prog-mhu005/prog-mhu005a.stdout - + testsuite/tests/ghci/prog-mhu005/unitA - + testsuite/tests/ghci/prog-mhu005/unitB - + testsuite/tests/ghci/prog021/A.hs - + testsuite/tests/ghci/prog021/B.hs - + testsuite/tests/ghci/prog021/Makefile - + testsuite/tests/ghci/prog021/all.T - + testsuite/tests/ghci/prog021/prog021a.script - + testsuite/tests/ghci/prog021/prog021a.stderr - + testsuite/tests/ghci/prog021/prog021a.stdout - + testsuite/tests/ghci/prog021/prog021b.script - + testsuite/tests/ghci/prog021/prog021b.stderr - + testsuite/tests/ghci/prog021/prog021b.stdout - + testsuite/tests/ghci/prog022/A.hs - + testsuite/tests/ghci/prog022/B.hs - + testsuite/tests/ghci/prog022/Makefile - + testsuite/tests/ghci/prog022/all.T - + testsuite/tests/ghci/prog022/ghci.prog022a.script - + testsuite/tests/ghci/prog022/ghci.prog022a.stderr - + testsuite/tests/ghci/prog022/ghci.prog022a.stdout - + testsuite/tests/ghci/prog022/ghci.prog022b.script - + testsuite/tests/ghci/prog022/ghci.prog022b.stderr - + testsuite/tests/ghci/prog022/ghci.prog022b.stdout - testsuite/tests/ghci/scripts/ghci021.stderr - testsuite/tests/haddock/should_compile_flag_haddock/T17544.stderr - testsuite/tests/haddock/should_compile_flag_haddock/T17544_kw.stderr - + testsuite/tests/hiefile/should_run/HieGadtConSigs.hs - + testsuite/tests/hiefile/should_run/HieGadtConSigs.stdout - testsuite/tests/hiefile/should_run/all.T - + testsuite/tests/hpc/recsel/Makefile - + testsuite/tests/hpc/recsel/recsel.hs - + testsuite/tests/hpc/recsel/recsel.stdout - + testsuite/tests/hpc/recsel/test.T - + testsuite/tests/indexed-types/should_fail/T26176.hs - + testsuite/tests/indexed-types/should_fail/T26176.stderr - testsuite/tests/indexed-types/should_fail/all.T - testsuite/tests/interface-stability/base-exports.stdout - testsuite/tests/interface-stability/base-exports.stdout-javascript-unknown-ghcjs - testsuite/tests/interface-stability/base-exports.stdout-mingw32 - testsuite/tests/interface-stability/base-exports.stdout-ws-32 - testsuite/tests/interface-stability/ghc-experimental-exports.stdout - testsuite/tests/interface-stability/ghc-experimental-exports.stdout-mingw32 - testsuite/tests/interface-stability/ghc-prim-exports.stdout - testsuite/tests/interface-stability/ghc-prim-exports.stdout-mingw32 - testsuite/tests/linear/should_fail/LinearTHFail.stderr - testsuite/tests/linters/notes.stdout - testsuite/tests/parser/should_compile/DumpParsedAst.stderr - testsuite/tests/parser/should_compile/DumpRenamedAst.stderr - testsuite/tests/parser/should_compile/T15323.stderr - testsuite/tests/perf/compiler/hard_hole_fits.stderr - testsuite/tests/printer/T18791.stderr - testsuite/tests/profiling/should_run/caller-cc/all.T - testsuite/tests/quasiquotation/T3953.stderr - testsuite/tests/quasiquotation/qq001/qq001.stderr - testsuite/tests/quasiquotation/qq002/qq002.stderr - testsuite/tests/quasiquotation/qq003/qq003.stderr - testsuite/tests/quasiquotation/qq004/qq004.stderr - + testsuite/tests/quotes/LiftErrMsg.hs - + testsuite/tests/quotes/LiftErrMsg.stderr - + testsuite/tests/quotes/LiftErrMsgDefer.hs - + testsuite/tests/quotes/LiftErrMsgDefer.stderr - + testsuite/tests/quotes/LiftErrMsgTyped.hs - + testsuite/tests/quotes/LiftErrMsgTyped.stderr - + testsuite/tests/quotes/QQError.hs - + testsuite/tests/quotes/QQError.stderr - testsuite/tests/quotes/T10384.stderr - testsuite/tests/quotes/TH_localname.stderr - testsuite/tests/quotes/all.T - + testsuite/tests/rep-poly/T26107.hs - testsuite/tests/rep-poly/all.T - + testsuite/tests/rts/T22859.hs - + testsuite/tests/rts/T22859.stderr - testsuite/tests/rts/all.T - testsuite/tests/splice-imports/SI03.stderr - testsuite/tests/splice-imports/SI05.stderr - testsuite/tests/splice-imports/SI16.stderr - testsuite/tests/splice-imports/SI18.stderr - testsuite/tests/splice-imports/SI20.stderr - testsuite/tests/splice-imports/SI25.stderr - testsuite/tests/splice-imports/SI28.stderr - testsuite/tests/splice-imports/SI31.stderr - + testsuite/tests/th/GadtConSigs_th_dump1.hs - + testsuite/tests/th/GadtConSigs_th_dump1.stderr - + testsuite/tests/th/GadtConSigs_th_pprint1.hs - + testsuite/tests/th/GadtConSigs_th_pprint1.stderr - + testsuite/tests/th/QQInQuote.hs - + testsuite/tests/th/QQTopError.hs - + testsuite/tests/th/QQTopError.stderr - testsuite/tests/th/T10598_TH.stderr - testsuite/tests/th/T14681.stderr - testsuite/tests/th/T16976z.stderr - testsuite/tests/th/T17804.stderr - testsuite/tests/th/T17820a.stderr - testsuite/tests/th/T17820b.stderr - testsuite/tests/th/T17820c.stderr - testsuite/tests/th/T17820d.stderr - testsuite/tests/th/T17820e.stderr - testsuite/tests/th/T20868.stdout - testsuite/tests/th/T23829_hasty.stderr - testsuite/tests/th/T23829_hasty_b.stderr - testsuite/tests/th/T5508.stderr - testsuite/tests/th/T5795.stderr - testsuite/tests/th/TH_Lift.stderr - testsuite/tests/th/all.T - testsuite/tests/th/overloaded/TH_overloaded_constraints_fail.stderr - + testsuite/tests/typecheck/should_compile/T14010.hs - + testsuite/tests/typecheck/should_compile/T20873c.hs - − testsuite/tests/typecheck/should_compile/T22141a.stderr - − testsuite/tests/typecheck/should_compile/T22141b.stderr - − testsuite/tests/typecheck/should_compile/T22141c.stderr - − testsuite/tests/typecheck/should_compile/T22141d.stderr - − testsuite/tests/typecheck/should_compile/T22141e.stderr - testsuite/tests/typecheck/should_compile/T23739a.hs - + testsuite/tests/typecheck/should_compile/T25992.hs - + testsuite/tests/typecheck/should_compile/T25992.stderr - + testsuite/tests/typecheck/should_compile/TyAppPat_Tricky.hs - testsuite/tests/typecheck/should_compile/all.T - testsuite/tests/typecheck/should_fail/T20443b.stderr - − testsuite/tests/typecheck/should_fail/T20873c.hs - − testsuite/tests/typecheck/should_fail/T20873c.stderr - testsuite/tests/typecheck/should_compile/T22141a.hs → testsuite/tests/typecheck/should_fail/T22141a.hs - testsuite/tests/typecheck/should_fail/T22141a.stderr - testsuite/tests/typecheck/should_compile/T22141b.hs → testsuite/tests/typecheck/should_fail/T22141b.hs - testsuite/tests/typecheck/should_fail/T22141b.stderr - testsuite/tests/typecheck/should_compile/T22141c.hs → testsuite/tests/typecheck/should_fail/T22141c.hs - testsuite/tests/typecheck/should_fail/T22141c.stderr - testsuite/tests/typecheck/should_compile/T22141d.hs → testsuite/tests/typecheck/should_fail/T22141d.hs - testsuite/tests/typecheck/should_fail/T22141d.stderr - testsuite/tests/typecheck/should_compile/T22141e.hs → testsuite/tests/typecheck/should_fail/T22141e.hs - testsuite/tests/typecheck/should_fail/T22141e.stderr - testsuite/tests/typecheck/should_compile/T22141e_Aux.hs → testsuite/tests/typecheck/should_fail/T22141e_Aux.hs - testsuite/tests/typecheck/should_fail/TyAppPat_TooMany.stderr - testsuite/tests/typecheck/should_fail/all.T - testsuite/tests/typecheck/should_fail/tcfail097.stderr - + testsuite/tests/vdq-rta/should_compile/T25127_data.hs - + testsuite/tests/vdq-rta/should_compile/T25127_data_inst.hs - + testsuite/tests/vdq-rta/should_compile/T25127_infix.hs - + testsuite/tests/vdq-rta/should_compile/T25127_newtype.hs - testsuite/tests/vdq-rta/should_compile/all.T - testsuite/tests/vdq-rta/should_fail/T23739_fail_case.hs - testsuite/tests/vdq-rta/should_fail/T23739_fail_case.stderr - testsuite/tests/vdq-rta/should_fail/T24159_type_syntax_th_fail.script - + testsuite/tests/vdq-rta/should_fail/T25127_fail_arity.hs - + testsuite/tests/vdq-rta/should_fail/T25127_fail_arity.stderr - + testsuite/tests/vdq-rta/should_fail/T25127_fail_th_quote.hs - + testsuite/tests/vdq-rta/should_fail/T25127_fail_th_quote.stderr - testsuite/tests/vdq-rta/should_fail/all.T - utils/check-exact/ExactPrint.hs - utils/ghc-toolchain/exe/Main.hs - utils/ghc-toolchain/src/GHC/Toolchain/Target.hs - utils/haddock/CHANGES.md - utils/haddock/doc/cheatsheet/haddocks.md - utils/haddock/doc/markup.rst - utils/haddock/haddock-api/haddock-api.cabal - utils/haddock/haddock-api/src/Haddock/Backends/Hoogle.hs - utils/haddock/haddock-api/src/Haddock/Backends/LaTeX.hs - utils/haddock/haddock-api/src/Haddock/Backends/Xhtml.hs - utils/haddock/haddock-api/src/Haddock/Backends/Xhtml/Decl.hs - utils/haddock/haddock-api/src/Haddock/Convert.hs - utils/haddock/haddock-api/src/Haddock/GhcUtils.hs - utils/haddock/haddock-api/src/Haddock/Interface.hs - utils/haddock/haddock-api/src/Haddock/Interface/AttachInstances.hs - utils/haddock/haddock-api/src/Haddock/Interface/Create.hs - utils/haddock/haddock-api/src/Haddock/Interface/Rename.hs - utils/haddock/haddock-api/src/Haddock/InterfaceFile.hs - utils/haddock/haddock-api/src/Haddock/Types.hs - utils/haddock/haddock-library/haddock-library.cabal - utils/haddock/haddock-library/src/Documentation/Haddock/Parser.hs - utils/haddock/haddock-test/haddock-test.cabal - utils/haddock/haddock-test/src/Test/Haddock/Config.hs - utils/haddock/haddock.cabal - utils/haddock/html-test/ref/Bug1004.html - + utils/haddock/html-test/ref/Bug25739.html - + utils/haddock/html-test/ref/RedactTypeSynonyms.html - + utils/haddock/html-test/src/Bug25739.hs - + utils/haddock/html-test/src/RedactTypeSynonyms.hs - + utils/haddock/latex-test/ref/RedactTypeSynonyms/RedactTypeSynonyms.tex - + utils/haddock/latex-test/src/RedactTypeSynonyms/RedactTypeSynonyms.hs - utils/hsc2hs The diff was not included because it is too large. View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/1a8e99694801421030d081b4212f77… -- View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/1a8e99694801421030d081b4212f77… You're receiving this email because of your account on gitlab.haskell.org.

1 0

[Git][ghc/ghc] Pushed new branch wip/T26175
by Ben Gamari (＠bgamari) 09 Jul '25

09 Jul '25

Ben Gamari pushed new branch wip/T26175 at Glasgow Haskell Compiler / GHC -- View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/tree/wip/T26175 You're receiving this email because of your account on gitlab.haskell.org.

1 0

[Git][ghc/ghc] Pushed new branch wip/torsten.schmits/worker-backport-2025-07-09
by Torsten Schmits (＠torsten.schmits) 09 Jul '25

09 Jul '25

Torsten Schmits pushed new branch wip/torsten.schmits/worker-backport-2025-07-09 at Glasgow Haskell Compiler / GHC -- View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/tree/wip/torsten.schmits/worker-backpo… You're receiving this email because of your account on gitlab.haskell.org.

1 0

[Git][ghc/ghc][wip/T25716] testsuite/recomp015: Ignore stderr
by Ben Gamari (＠bgamari) 09 Jul '25

09 Jul '25

Ben Gamari pushed to branch wip/T25716 at Glasgow Haskell Compiler / GHC Commits: 65e1e593 by Ben Gamari at 2025-07-09T20:31:46+00:00 testsuite/recomp015: Ignore stderr This is necessary since ld.bfd complains that we don't have a .note.GNU-stack section, potentially resulting in an executable stack. - - - - - 1 changed file: - testsuite/tests/driver/recomp015/all.T Changes: ===================================== testsuite/tests/driver/recomp015/all.T ===================================== @@ -5,7 +5,11 @@ test('recomp015', # See ticket:11022#comment:7 unless(opsys('linux') or opsys('solaris2') or opsys('openbsd'), skip), when(arch('arm'), skip), - js_skip # JS backend doesn't support .s assembly files + js_skip, # JS backend doesn't support .s assembly files + + # the linker sometimes throws warnings since we don't + # generate a .note.GNU-stack section + ignore_stderr, ], makefile_test, []) View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/commit/65e1e59356f617213fca67a235f240f… -- View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/commit/65e1e59356f617213fca67a235f240f… You're receiving this email because of your account on gitlab.haskell.org.

1 0

[Git][ghc/ghc] Pushed new branch wip/T25391-9.12
by Ben Gamari (＠bgamari) 09 Jul '25

09 Jul '25

Ben Gamari pushed new branch wip/T25391-9.12 at Glasgow Haskell Compiler / GHC -- View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/tree/wip/T25391-9.12 You're receiving this email because of your account on gitlab.haskell.org.

1 0

[Git][ghc/ghc][wip/T26164] compiler: Eliminate remaining references to GHC module
by Ben Gamari (＠bgamari) 09 Jul '25

09 Jul '25

Ben Gamari pushed to branch wip/T26164 at Glasgow Haskell Compiler / GHC Commits: c53dc97c by Ben Gamari at 2025-07-09T15:03:30-04:00 compiler: Eliminate remaining references to GHC module - - - - - 2 changed files: - compiler/GHC/Driver/Backpack.hs - compiler/GHC/Driver/Session/Units.hs Changes: ===================================== compiler/GHC/Driver/Backpack.hs ===================================== @@ -35,6 +35,8 @@ import GHC.Driver.Env import GHC.Driver.Errors import GHC.Driver.Errors.Types +import GHC.Hs +import GHC.Unit.Module.ModIface import GHC.Parser import GHC.Parser.Header import GHC.Parser.Lexer @@ -42,7 +44,6 @@ import GHC.Parser.Annotation import GHC.Rename.Names -import GHC hiding (Failed, Succeeded) import GHC.Tc.Utils.Monad import GHC.Iface.Recomp @@ -78,6 +79,8 @@ import GHC.Data.FastString import qualified GHC.Data.EnumSet as EnumSet import qualified GHC.Data.ShortText as ST +import Language.Haskell.Syntax + import Data.List ( partition ) import System.Exit import Control.Monad ===================================== compiler/GHC/Driver/Session/Units.hs ===================================== @@ -4,10 +4,6 @@ {-# LANGUAGE TupleSections #-} module GHC.Driver.Session.Units (initMake, initMulti) where --- The official GHC API -import qualified GHC -import GHC (parseTargetFiles, Ghc, GhcMonad(..)) - import GHC.Driver.Env import GHC.Driver.Errors import GHC.Driver.Errors.Types View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/commit/c53dc97c36e84012a626dd99045a103… -- View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/commit/c53dc97c36e84012a626dd99045a103… You're receiving this email because of your account on gitlab.haskell.org.

1 0

[Git][ghc/ghc] Pushed new branch wip/T26164
by Ben Gamari (＠bgamari) 09 Jul '25

09 Jul '25

Ben Gamari pushed new branch wip/T26164 at Glasgow Haskell Compiler / GHC -- View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/tree/wip/T26164 You're receiving this email because of your account on gitlab.haskell.org.

1 0

[Git][ghc/ghc][wip/ghc-9.14] 50 commits: Tick uses of wildcard/pun field binds as if using the record selector function
by Ben Gamari (＠bgamari) 09 Jul '25

09 Jul '25

Ben Gamari pushed to branch wip/ghc-9.14 at Glasgow Haskell Compiler / GHC Commits: 43b606bb by Florian Ragwitz at 2025-06-27T16:31:26-04:00 Tick uses of wildcard/pun field binds as if using the record selector function Fixes #17834. See Note [Record-selector ticks] for additional reasoning behind this as well as an overview of the implementation details and future improvements. - - - - - d4952549 by Ben Gamari at 2025-06-27T16:32:08-04:00 testsuite/caller-cc: Make CallerCc[123] less sensitive These were previously sensitive to irrelevant changes in program structure. To avoid this we filter out all by lines emitted by the -fcaller-cc from the profile. - - - - - 8d33d048 by Berk Özkütük at 2025-07-07T20:42:20-04:00 Consider `PromotedDataCon` in `tyConStupidTheta` Haddock checks data declarations for the stupid theta so as not to pretty-print them as empty contexts. Type data declarations end up as `PromotedDataCon`s by the time Haddock performs this check, causing a panic. This commit extends `tyConStupidTheta` so that it returns an empty list for `PromotedDataCon`s. This decision was guided by the fact that type data declarations never have data type contexts (see (R1) in Note [Type data declarations]). Fixes #25739. - - - - - a26243fd by Ryan Hendrickson at 2025-07-07T20:43:07-04:00 haddock: Document instances from other packages When attaching instances to `Interface`s, it isn't enough just to look for instances in the list of `Interface`s being processed. We also need to look in the modules on which they depend, including those outside of this package. Fixes #25147. Fixes #26079. - - - - - 0fb24420 by Rodrigo Mesquita at 2025-07-07T20:43:49-04:00 hadrian: Fallback logic for internal interpreter When determining whether to build the internal interpreter, the `make` build system had a fallback case for platforms not in the list of explicitly-supported operating systems and architectures. This fallback says we should try to build the internal interpreter if building dynamic GHC programs (if the architecture is unknown). Fixes #24098 - - - - - fe925bd4 by Ben Gamari at 2025-07-07T20:44:30-04:00 users-guide: Reference Wasm FFI section - - - - - 5856284b by Ben Gamari at 2025-07-07T20:44:30-04:00 users-guide: Fix too-short heading warning - - - - - a48dcdf3 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Reorganise documentation for allocate* functions Consolodate interface information into the .h file, keeping just implementation details in the .c file. Use Notes stlye in the .h file and refer to notes from the .c file. - - - - - de5b528c by Duncan Coutts at 2025-07-07T20:45:18-04:00 Introduce common utilities for allocating arrays The intention is to share code among the several places that do this already. - - - - - b321319d by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in Heap.c The CMM primop can now report heap overflow. - - - - - 1d557ffb by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in ThreadLabels.c Replacing a local utility. - - - - - e59a1430 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in Threads.c Replacing local open coded version. - - - - - 482df1c9 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Add exitHeapOverflow helper utility This will be useful with the array alloc functions, since unlike allocate/allocateMaybeFail, they do not come in two versions. So if it's not convenient to propagate failure, then one can use this. - - - - - 4d3ec8f9 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in Weak.c Also add a cpp macro CCS_SYSTEM_OR_NULL which does what it says. The benefit of this is that it allows us to referece CCS_SYSTEM even when we're not in PROFILING mode. That makes abstracting over profiling vs normal mode a lot easier. - - - - - 0c4f2fde by Duncan Coutts at 2025-07-07T20:45:18-04:00 Convert the array alloc primops to use the new array alloc utils - - - - - a3354ad9 by Duncan Coutts at 2025-07-07T20:45:18-04:00 While we're at it, add one missing 'likely' hint To a cmm primops that raises an exception, like the others now do. - - - - - 33b546bd by meooow25 at 2025-07-07T20:46:09-04:00 Keep scanl' strict in the head on rewrite `scanl'` forces elements to WHNF when the corresponding `(:)`s are forced. The rewrite rule for `scanl'` missed forcing the first element, which is fixed here with a `seq`. - - - - - 8a69196e by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 debugger/rts: Allow toggling step-in per thread The RTS global flag `rts_stop_next_breakpoint` globally sets the interpreter to stop at the immediate next breakpoint. With this commit, single step mode can additionally be set per thread in the TSO flag (TSO_STOP_NEXT_BREAKPOINT). Being able to toggle "stop at next breakpoint" per thread is an important requirement for implementing "stepping out" of a function in a multi-threaded context. And, more generally, having a per-thread flag for single-stepping paves the way for multi-threaded debugging. That said, when we want to enable "single step" mode for the whole interpreted program we still want to stop at the immediate next breakpoint, whichever thread it belongs to. That's why we also keep the global `rts_stop_next_breakpoint` flag, with `rts_enableStopNextBreakpointAll` and `rts_disableStopNextBreakpointAll` helpers. Preparation for #26042 - - - - - 73d3f864 by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 docs: Case continuation BCOs This commit documents a subtle interaction between frames for case BCOs and their parents frames. Namely, case continuation BCOs may refer to (non-local) variables that are part of the parent's frame. The note expanding a bit on these details is called [Case continuation BCOs] - - - - - d7aeddcf by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 debugger: Implement step-out feature Implements support for stepping-out of a function (aka breaking right after returning from a function) in the interactive debugger. It also introduces a GHCi command :stepout to step-out of a function being debugged in the interpreter. The feature is described as: Stop at the first breakpoint immediately after returning from the current function scope. Known limitations: because a function tail-call does not push a stack frame, if step-out is used inside of a function that was tail-called, execution will not be returned to its caller, but rather its caller's first non-tail caller. On the other hand, it means the debugger follows the more realistic execution of the program. In the following example: .. code-block:: none f = do a b <--- (1) set breakpoint then step in here c b = do ... d <--- (2) step-into this tail call d = do ... something <--- (3) step-out here ... Stepping-out will stop execution at the `c` invokation in `f`, rather than stopping at `b`. The key idea is simple: When step-out is enabled, traverse the runtime stack until a continuation BCO is found -- and enable the breakpoint heading that BCO explicitly using its tick-index. The details are specified in `Note [Debugger: Step-out]` in `rts/Interpreter.c`. Since PUSH_ALTS BCOs (representing case continuations) were never headed by a breakpoint (unlike the case alternatives they push), we introduced the BRK_ALTS instruction to allow the debugger to set a case continuation to stop at the breakpoint heading the alternative that is taken. This is further described in `Note [Debugger: BRK_ALTS]`. Fixes #26042 - - - - - 5d9adf51 by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 debugger: Filter step-out stops by SrcSpan To implement step-out, the RTS looks for the first continuation frame on the stack and explicitly enables its entry breakpoint. However, some continuations will be contained in the function from which step-out was initiated (trivial example is a case expression). Similarly to steplocal, we will filter the breakpoints at which the RTS yields to the debugger based on the SrcSpan. When doing step-out, only stop if the breakpoint is /not/ contained in the function from which we initiated it. This is especially relevant in monadic statements such as IO which is compiled to a long chain of case expressions. See Note [Debugger: Filtering step-out stops] - - - - - 7677adcc by Cheng Shao at 2025-07-08T07:40:29-04:00 compiler: make ModBreaks serializable - - - - - 14f67c6d by Rodrigo Mesquita at 2025-07-08T07:40:29-04:00 refactor: "Inspecting the session" moved from GHC Moved utilities for inspecting the session from the GHC module to GHC.Driver.Session.Inspect Purely a clean up - - - - - 9d3f484a by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Pass the HUG to readModBreaks, not HscEnv A minor cleanup. The associated history and setupBreakpoint functions are changed accordingly. - - - - - b595f713 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Move readModBreaks to GHC.Runtime.Interpreter With some small docs changes - - - - - d223227a by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Move interpreterProfiled to Interp.Types Moves interpreterProfiled and interpreterDynamic to GHC.Runtime.Interpreter.Types from GHC.Runtime.Interpreter. - - - - - 7fdd0a3d by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Don't import GHC in Debugger.Breakpoints Remove the top-level import GHC from GHC.Runtime.Debugger.Breakpoints This makes the module dependencies more granular and cleans up the qualified imports from the code. - - - - - 5e4da31b by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 refactor: Use BreakpointId in Core and Ifaces - - - - - 741ac3a8 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 stg2bc: Derive BcM via ReaderT StateT A small refactor that simplifies GHC.StgToByteCode by deriving-via the Monad instances for BcM. This is done along the lines of previous similar refactors like 72b54c0760bbf85be1f73c1a364d4701e5720465. - - - - - 0414fcc9 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 refact: Split InternalModBreaks out of ModBreaks There are currently two competing ways of referring to a Breakpoint: 1. Using the Tick module + Tick index 2. Using the Info module + Info index 1. The Tick index is allocated during desugaring in `mkModBreaks`. It is used to refer to a breakpoint associated to a Core Tick. For a given Tick module, there are N Ticks indexed by Tick index. 2. The Info index is allocated during code generation (in StgToByteCode) and uniquely identifies the breakpoints at runtime (and is indeed used to determine which breakpoint was hit at runtime). Why we need both is described by Note [Breakpoint identifiers]. For every info index we used to keep a `CgBreakInfo`, a datatype containing information relevant to ByteCode Generation, in `ModBreaks`. This commit splits out the `IntMap CgBreakInfo` out of `ModBreaks` into a new datatype `InternalModBreaks`. - The purpose is to separate the `ModBreaks` datatype, which stores data associated from tick-level information which is fixed after desugaring, from the unrelated `IntMap CgBreakInfo` information accumulated during bytecode generation. - We move `ModBreaks` to GHC.HsToCore.Breakpoints The new `InternalModBreaks` simply combines the `IntMap CgBreakInfo` with `ModBreaks`. After code generation we construct an `InternalModBreaks` with the `CgBreakInfo`s we accumulated and the existing `ModBreaks` and store that in the compiled BCO in `bc_breaks`. - Note that we previously only updated the `modBreaks_breakInfo` field of `ModBreaks` at this exact location, and then stored the updated `ModBreaks` in the same `bc_breaks`. - We put this new datatype in GHC.ByteCode.Breakpoints The rest of the pipeline for which CgBreakInfo is relevant is accordingly updated to also use `InternalModBreaks` - - - - - 2a097955 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Use BreakpointIds in bytecode gen Small clean up to use BreakpointId and InternalBreakpointId more uniformly in bytecode generation rather than using Module + Ix pairs - - - - - 0515cc2f by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 ghci: Allocate BreakArrays at link time only Previously, a BreakArray would be allocated with a slot for every tick in a module at `mkModBreaks`, in HsToCore. However, this approach has a few downsides: - It interleaves interpreter behaviour (allocating arrays for breakpoints) within the desugarer - It is inflexible in the sense it is impossible for the bytecode generator to add "internal" breakpoints that can be triggered at runtime, because those wouldn't have a source tick. (This is relevant for our intended implementation plan of step-out in #26042) - It ties the BreakArray indices to the *tick* indexes, while at runtime we would rather just have the *info* indexes (currently we have both because BreakArrays are indexed by the *tick* one). Paving the way for #26042 and #26064, this commit moves the allocation of BreakArrays to bytecode-loading time -- akin to what is done for CCS arrays. Since a BreakArray is allocated only when bytecode is linked, if a breakpoint is set (e.g. `:break 10`) before the bytecode is linked, there will exist no BreakArray to trigger the breakpoint in. Therefore, the function to allocate break arrays (`allocateBreakArrays`) is exposed and also used in GHC.Runtime.Eval to allocate a break array when a breakpoint is set, if it doesn't exist yet (in the linker env). - - - - - 8016561f by Simon Peyton Jones at 2025-07-08T07:41:13-04:00 Add a test for T26176 - - - - - 454cd682 by Simon Peyton Jones at 2025-07-08T07:41:13-04:00 Add test for #14010 This test started to work in GHC 9.6 and has worked since. This MR just adds a regression test - - - - - ea2c6673 by Teo Camarasu at 2025-07-08T13:24:43-04:00 Implement user-defined allocation limit handlers Allocation Limits allow killing a thread if they allocate more than a user-specified limit. We extend this feature to allow more versatile behaviour. - We allow not killing the thread if the limit is exceeded. - We allow setting a custom handler to be called when the limit is exceeded. User-specified allocation limit handlers run in a fresh thread and are passed the ThreadId of the thread that exceeded its limit. We introduce utility functions for getting and setting the allocation limits of other threads, so that users can reset the limit of a thread from a handler. Both of these are somewhat coarse-grained as we are unaware of the allocations in the current nursery chunk. We provide several examples of usages in testsuite/tests/rts/T22859.hs Resolves #22859 - - - - - 03e047f9 by Simon Hengel at 2025-07-08T13:25:25-04:00 Fix typo in using.rst - - - - - 67957854 by Ben Gamari at 2025-07-09T09:44:44-04:00 compiler: Import AnnotationWrapper from ghc-internal Since `GHC.Desugar` exported from `base` has been deprecated. - - - - - 813d99d6 by Ben Gamari at 2025-07-09T09:44:44-04:00 ghc-compact: Eliminate dependency on ghc-prim - - - - - 0ec952a1 by Ben Gamari at 2025-07-09T09:44:44-04:00 ghc-heap: Eliminate dependency on ghc-prim - - - - - 480074c3 by Ben Gamari at 2025-07-09T09:44:44-04:00 ghc-heap: Drop redundant import - - - - - 03455829 by Ben Gamari at 2025-07-09T09:44:45-04:00 ghc-prim: Bump version to 0.13.1 There are no interface changes from 0.13.0 but the implementation now lives in `ghc-internal`. - - - - - d315345a by Ben Gamari at 2025-07-09T09:44:45-04:00 template-haskell: Bump version number to 2.24.0.0 Bumps exceptions submodule. - - - - - 004c800e by Ben Gamari at 2025-07-09T09:44:45-04:00 Bump GHC version number to 9.14 - - - - - eb1a3816 by Ben Gamari at 2025-07-09T09:44:45-04:00 Bump parsec to 3.1.18.0 Bumps parsec submodule. - - - - - 86f83296 by Ben Gamari at 2025-07-09T09:44:45-04:00 unix: Bump to 2.8.7.0 Bumps unix submodule. - - - - - 89e13998 by Ben Gamari at 2025-07-09T09:44:45-04:00 binary: Bump to 0.8.9.3 Bumps binary submodule. - - - - - 55fff191 by Ben Gamari at 2025-07-09T09:44:45-04:00 Win32: Bump to 2.14.2.0 Bumps Win32 submodule. - - - - - 7dafa40c by Ben Gamari at 2025-07-09T09:44:45-04:00 base: Bump version to 4.22.0 Bumps various submodules. - - - - - ef03d8b8 by Rodrigo Mesquita at 2025-07-09T09:45:28-04:00 base: Export displayExceptionWithInfo This function should be exposed from base following CLC#285 Approved change in CLC#344 Fixes #26058 - - - - - e644192d by Ben Gamari at 2025-07-09T13:06:30-04:00 configure: bump version to 9.15 - - - - - 188 changed files: - compiler/GHC.hs - compiler/GHC/Builtin/primops.txt.pp - compiler/GHC/ByteCode/Asm.hs - + compiler/GHC/ByteCode/Breakpoints.hs - compiler/GHC/ByteCode/Instr.hs - compiler/GHC/ByteCode/Linker.hs - compiler/GHC/ByteCode/Types.hs - compiler/GHC/Core/FVs.hs - compiler/GHC/Core/Lint.hs - compiler/GHC/Core/Map/Expr.hs - compiler/GHC/Core/Opt/OccurAnal.hs - compiler/GHC/Core/Opt/Simplify/Iteration.hs - compiler/GHC/Core/Ppr.hs - compiler/GHC/Core/Subst.hs - compiler/GHC/Core/Tidy.hs - compiler/GHC/Core/TyCon.hs - compiler/GHC/Core/Utils.hs - compiler/GHC/CoreToIface.hs - compiler/GHC/CoreToStg.hs - compiler/GHC/CoreToStg/Prep.hs - compiler/GHC/Driver/Config.hs - + compiler/GHC/Driver/Session/Inspect.hs - compiler/GHC/HsToCore.hs - compiler/GHC/HsToCore/Breakpoints.hs - compiler/GHC/HsToCore/Ticks.hs - compiler/GHC/Iface/Syntax.hs - compiler/GHC/Iface/Tidy.hs - compiler/GHC/IfaceToCore.hs - compiler/GHC/Linker/Loader.hs - compiler/GHC/Linker/Types.hs - compiler/GHC/Runtime/Debugger/Breakpoints.hs - compiler/GHC/Runtime/Eval.hs - compiler/GHC/Runtime/Eval/Types.hs - compiler/GHC/Runtime/Interpreter.hs - compiler/GHC/Runtime/Interpreter/Types.hs - compiler/GHC/Stg/BcPrep.hs - compiler/GHC/Stg/FVs.hs - compiler/GHC/StgToByteCode.hs - compiler/GHC/StgToCmm/Prim.hs - compiler/GHC/StgToJS/Prim.hs - compiler/GHC/Tc/Gen/Splice.hs - − compiler/GHC/Types/Breakpoint.hs - compiler/GHC/Types/Tickish.hs - compiler/GHC/Unit/Module/ModGuts.hs - compiler/ghc.cabal.in - configure.ac - docs/users_guide/9.14.1-notes.rst - docs/users_guide/exts/doandifthenelse.rst - docs/users_guide/exts/ffi.rst - docs/users_guide/ghci.rst - docs/users_guide/using.rst - ghc/GHCi/UI.hs - hadrian/src/Oracles/Flag.hs - hadrian/src/Rules/Generate.hs - hadrian/src/Settings/Builders/Cabal.hs - hadrian/src/Settings/Packages.hs - hadrian/src/Settings/Program.hs - libraries/Win32 - libraries/array - libraries/base/base.cabal.in - libraries/base/changelog.md - libraries/base/src/Control/Exception.hs - libraries/binary - libraries/deepseq - libraries/directory - libraries/exceptions - libraries/filepath - libraries/ghc-boot-th/ghc-boot-th.cabal.in - libraries/ghc-boot/ghc-boot.cabal.in - libraries/ghc-compact/GHC/Compact.hs - libraries/ghc-compact/GHC/Compact/Serialized.hs - libraries/ghc-compact/ghc-compact.cabal - libraries/ghc-experimental/ghc-experimental.cabal.in - + libraries/ghc-experimental/src/System/Mem/Experimental.hs - libraries/ghc-heap/GHC/Exts/Heap/Closures.hs - libraries/ghc-heap/GHC/Exts/Heap/FFIClosures_ProfilingDisabled.hsc - libraries/ghc-heap/GHC/Exts/Heap/FFIClosures_ProfilingEnabled.hsc - libraries/ghc-heap/GHC/Exts/Heap/Utils.hsc - libraries/ghc-heap/ghc-heap.cabal.in - libraries/ghc-heap/tests/parse_tso_flags.hs - libraries/ghc-internal/ghc-internal.cabal.in - + libraries/ghc-internal/src/GHC/Internal/AllocationLimitHandler.hs - libraries/ghc-internal/src/GHC/Internal/Exception/Type.hs - libraries/ghc-internal/src/GHC/Internal/List.hs - libraries/ghc-prim/changelog.md - libraries/ghc-prim/ghc-prim.cabal - + libraries/ghci/GHCi/Debugger.hs - libraries/ghci/GHCi/Message.hs - libraries/ghci/GHCi/Run.hs - libraries/ghci/ghci.cabal.in - libraries/haskeline - libraries/hpc - libraries/os-string - libraries/parsec - libraries/process - libraries/semaphore-compat - libraries/stm - libraries/template-haskell/template-haskell.cabal.in - libraries/terminfo - libraries/text - libraries/unix - + rts/AllocArray.c - + rts/AllocArray.h - rts/Disassembler.c - rts/Heap.c - rts/Interpreter.c - rts/Interpreter.h - rts/Prelude.h - rts/PrimOps.cmm - rts/RtsStartup.c - rts/RtsSymbols.c - rts/RtsUtils.c - rts/Schedule.c - rts/StgMiscClosures.cmm - rts/ThreadLabels.c - rts/Threads.c - rts/Weak.c - rts/external-symbols.list.in - rts/include/Rts.h - rts/include/rts/Bytecodes.h - rts/include/rts/Constants.h - rts/include/rts/prof/CCS.h - rts/include/rts/storage/Closures.h - rts/include/rts/storage/GC.h - rts/include/rts/storage/Heap.h - rts/include/rts/storage/TSO.h - rts/include/stg/MiscClosures.h - rts/rts.cabal - rts/sm/Storage.c - testsuite/tests/backpack/cabal/bkpcabal08/bkpcabal08.stdout - testsuite/tests/count-deps/CountDepsAst.stdout - testsuite/tests/count-deps/CountDepsParser.stdout - + testsuite/tests/ghci.debugger/scripts/T26042b.hs - + testsuite/tests/ghci.debugger/scripts/T26042b.script - + testsuite/tests/ghci.debugger/scripts/T26042b.stdout - + testsuite/tests/ghci.debugger/scripts/T26042c.hs - + testsuite/tests/ghci.debugger/scripts/T26042c.script - + testsuite/tests/ghci.debugger/scripts/T26042c.stdout - + testsuite/tests/ghci.debugger/scripts/T26042d.hs - + testsuite/tests/ghci.debugger/scripts/T26042d.script - + testsuite/tests/ghci.debugger/scripts/T26042d.stdout - + testsuite/tests/ghci.debugger/scripts/T26042e.hs - + testsuite/tests/ghci.debugger/scripts/T26042e.script - + testsuite/tests/ghci.debugger/scripts/T26042e.stdout - + testsuite/tests/ghci.debugger/scripts/T26042f.hs - + testsuite/tests/ghci.debugger/scripts/T26042f.script - + testsuite/tests/ghci.debugger/scripts/T26042f1.stderr - + testsuite/tests/ghci.debugger/scripts/T26042f1.stdout - + testsuite/tests/ghci.debugger/scripts/T26042f2.stdout - + testsuite/tests/ghci.debugger/scripts/T26042g.hs - + testsuite/tests/ghci.debugger/scripts/T26042g.script - + testsuite/tests/ghci.debugger/scripts/T26042g.stdout - testsuite/tests/ghci.debugger/scripts/all.T - + testsuite/tests/hpc/recsel/Makefile - + testsuite/tests/hpc/recsel/recsel.hs - + testsuite/tests/hpc/recsel/recsel.stdout - + testsuite/tests/hpc/recsel/test.T - + testsuite/tests/indexed-types/should_fail/T26176.hs - + testsuite/tests/indexed-types/should_fail/T26176.stderr - testsuite/tests/indexed-types/should_fail/all.T - testsuite/tests/interface-stability/base-exports.stdout - testsuite/tests/interface-stability/base-exports.stdout-javascript-unknown-ghcjs - testsuite/tests/interface-stability/base-exports.stdout-mingw32 - testsuite/tests/interface-stability/base-exports.stdout-ws-32 - testsuite/tests/interface-stability/ghc-experimental-exports.stdout - testsuite/tests/interface-stability/ghc-experimental-exports.stdout-mingw32 - testsuite/tests/interface-stability/ghc-prim-exports.stdout - testsuite/tests/interface-stability/ghc-prim-exports.stdout-mingw32 - testsuite/tests/profiling/should_run/caller-cc/all.T - + testsuite/tests/rts/T22859.hs - + testsuite/tests/rts/T22859.stderr - testsuite/tests/rts/all.T - + testsuite/tests/typecheck/should_compile/T14010.hs - testsuite/tests/typecheck/should_compile/all.T - utils/haddock/CHANGES.md - utils/haddock/haddock-api/haddock-api.cabal - utils/haddock/haddock-api/src/Haddock/Interface/AttachInstances.hs - utils/haddock/haddock-api/src/Haddock/Interface/Create.hs - utils/haddock/haddock-api/src/Haddock/InterfaceFile.hs - utils/haddock/haddock-api/src/Haddock/Types.hs - utils/haddock/haddock-library/haddock-library.cabal - utils/haddock/haddock-test/haddock-test.cabal - utils/haddock/haddock-test/src/Test/Haddock/Config.hs - utils/haddock/haddock.cabal - utils/haddock/html-test/ref/Bug1004.html - + utils/haddock/html-test/ref/Bug25739.html - + utils/haddock/html-test/src/Bug25739.hs - utils/hsc2hs The diff was not included because it is too large. View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/ada4cf44a40f6936d58992c3d87a35… -- View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/ada4cf44a40f6936d58992c3d87a35… You're receiving this email because of your account on gitlab.haskell.org.

1 0

[Git][ghc/ghc][wip/haanss/depdir] 60 commits: Consider `PromotedDataCon` in `tyConStupidTheta`
by Hassan Al-Awwadi (＠hassan.awwadi) 09 Jul '25

09 Jul '25

Hassan Al-Awwadi pushed to branch wip/haanss/depdir at Glasgow Haskell Compiler / GHC Commits: 8d33d048 by Berk Özkütük at 2025-07-07T20:42:20-04:00 Consider `PromotedDataCon` in `tyConStupidTheta` Haddock checks data declarations for the stupid theta so as not to pretty-print them as empty contexts. Type data declarations end up as `PromotedDataCon`s by the time Haddock performs this check, causing a panic. This commit extends `tyConStupidTheta` so that it returns an empty list for `PromotedDataCon`s. This decision was guided by the fact that type data declarations never have data type contexts (see (R1) in Note [Type data declarations]). Fixes #25739. - - - - - a26243fd by Ryan Hendrickson at 2025-07-07T20:43:07-04:00 haddock: Document instances from other packages When attaching instances to `Interface`s, it isn't enough just to look for instances in the list of `Interface`s being processed. We also need to look in the modules on which they depend, including those outside of this package. Fixes #25147. Fixes #26079. - - - - - 0fb24420 by Rodrigo Mesquita at 2025-07-07T20:43:49-04:00 hadrian: Fallback logic for internal interpreter When determining whether to build the internal interpreter, the `make` build system had a fallback case for platforms not in the list of explicitly-supported operating systems and architectures. This fallback says we should try to build the internal interpreter if building dynamic GHC programs (if the architecture is unknown). Fixes #24098 - - - - - fe925bd4 by Ben Gamari at 2025-07-07T20:44:30-04:00 users-guide: Reference Wasm FFI section - - - - - 5856284b by Ben Gamari at 2025-07-07T20:44:30-04:00 users-guide: Fix too-short heading warning - - - - - a48dcdf3 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Reorganise documentation for allocate* functions Consolodate interface information into the .h file, keeping just implementation details in the .c file. Use Notes stlye in the .h file and refer to notes from the .c file. - - - - - de5b528c by Duncan Coutts at 2025-07-07T20:45:18-04:00 Introduce common utilities for allocating arrays The intention is to share code among the several places that do this already. - - - - - b321319d by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in Heap.c The CMM primop can now report heap overflow. - - - - - 1d557ffb by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in ThreadLabels.c Replacing a local utility. - - - - - e59a1430 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in Threads.c Replacing local open coded version. - - - - - 482df1c9 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Add exitHeapOverflow helper utility This will be useful with the array alloc functions, since unlike allocate/allocateMaybeFail, they do not come in two versions. So if it's not convenient to propagate failure, then one can use this. - - - - - 4d3ec8f9 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in Weak.c Also add a cpp macro CCS_SYSTEM_OR_NULL which does what it says. The benefit of this is that it allows us to referece CCS_SYSTEM even when we're not in PROFILING mode. That makes abstracting over profiling vs normal mode a lot easier. - - - - - 0c4f2fde by Duncan Coutts at 2025-07-07T20:45:18-04:00 Convert the array alloc primops to use the new array alloc utils - - - - - a3354ad9 by Duncan Coutts at 2025-07-07T20:45:18-04:00 While we're at it, add one missing 'likely' hint To a cmm primops that raises an exception, like the others now do. - - - - - 33b546bd by meooow25 at 2025-07-07T20:46:09-04:00 Keep scanl' strict in the head on rewrite `scanl'` forces elements to WHNF when the corresponding `(:)`s are forced. The rewrite rule for `scanl'` missed forcing the first element, which is fixed here with a `seq`. - - - - - 8a69196e by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 debugger/rts: Allow toggling step-in per thread The RTS global flag `rts_stop_next_breakpoint` globally sets the interpreter to stop at the immediate next breakpoint. With this commit, single step mode can additionally be set per thread in the TSO flag (TSO_STOP_NEXT_BREAKPOINT). Being able to toggle "stop at next breakpoint" per thread is an important requirement for implementing "stepping out" of a function in a multi-threaded context. And, more generally, having a per-thread flag for single-stepping paves the way for multi-threaded debugging. That said, when we want to enable "single step" mode for the whole interpreted program we still want to stop at the immediate next breakpoint, whichever thread it belongs to. That's why we also keep the global `rts_stop_next_breakpoint` flag, with `rts_enableStopNextBreakpointAll` and `rts_disableStopNextBreakpointAll` helpers. Preparation for #26042 - - - - - 73d3f864 by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 docs: Case continuation BCOs This commit documents a subtle interaction between frames for case BCOs and their parents frames. Namely, case continuation BCOs may refer to (non-local) variables that are part of the parent's frame. The note expanding a bit on these details is called [Case continuation BCOs] - - - - - d7aeddcf by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 debugger: Implement step-out feature Implements support for stepping-out of a function (aka breaking right after returning from a function) in the interactive debugger. It also introduces a GHCi command :stepout to step-out of a function being debugged in the interpreter. The feature is described as: Stop at the first breakpoint immediately after returning from the current function scope. Known limitations: because a function tail-call does not push a stack frame, if step-out is used inside of a function that was tail-called, execution will not be returned to its caller, but rather its caller's first non-tail caller. On the other hand, it means the debugger follows the more realistic execution of the program. In the following example: .. code-block:: none f = do a b <--- (1) set breakpoint then step in here c b = do ... d <--- (2) step-into this tail call d = do ... something <--- (3) step-out here ... Stepping-out will stop execution at the `c` invokation in `f`, rather than stopping at `b`. The key idea is simple: When step-out is enabled, traverse the runtime stack until a continuation BCO is found -- and enable the breakpoint heading that BCO explicitly using its tick-index. The details are specified in `Note [Debugger: Step-out]` in `rts/Interpreter.c`. Since PUSH_ALTS BCOs (representing case continuations) were never headed by a breakpoint (unlike the case alternatives they push), we introduced the BRK_ALTS instruction to allow the debugger to set a case continuation to stop at the breakpoint heading the alternative that is taken. This is further described in `Note [Debugger: BRK_ALTS]`. Fixes #26042 - - - - - 5d9adf51 by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 debugger: Filter step-out stops by SrcSpan To implement step-out, the RTS looks for the first continuation frame on the stack and explicitly enables its entry breakpoint. However, some continuations will be contained in the function from which step-out was initiated (trivial example is a case expression). Similarly to steplocal, we will filter the breakpoints at which the RTS yields to the debugger based on the SrcSpan. When doing step-out, only stop if the breakpoint is /not/ contained in the function from which we initiated it. This is especially relevant in monadic statements such as IO which is compiled to a long chain of case expressions. See Note [Debugger: Filtering step-out stops] - - - - - 7677adcc by Cheng Shao at 2025-07-08T07:40:29-04:00 compiler: make ModBreaks serializable - - - - - 14f67c6d by Rodrigo Mesquita at 2025-07-08T07:40:29-04:00 refactor: "Inspecting the session" moved from GHC Moved utilities for inspecting the session from the GHC module to GHC.Driver.Session.Inspect Purely a clean up - - - - - 9d3f484a by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Pass the HUG to readModBreaks, not HscEnv A minor cleanup. The associated history and setupBreakpoint functions are changed accordingly. - - - - - b595f713 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Move readModBreaks to GHC.Runtime.Interpreter With some small docs changes - - - - - d223227a by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Move interpreterProfiled to Interp.Types Moves interpreterProfiled and interpreterDynamic to GHC.Runtime.Interpreter.Types from GHC.Runtime.Interpreter. - - - - - 7fdd0a3d by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Don't import GHC in Debugger.Breakpoints Remove the top-level import GHC from GHC.Runtime.Debugger.Breakpoints This makes the module dependencies more granular and cleans up the qualified imports from the code. - - - - - 5e4da31b by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 refactor: Use BreakpointId in Core and Ifaces - - - - - 741ac3a8 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 stg2bc: Derive BcM via ReaderT StateT A small refactor that simplifies GHC.StgToByteCode by deriving-via the Monad instances for BcM. This is done along the lines of previous similar refactors like 72b54c0760bbf85be1f73c1a364d4701e5720465. - - - - - 0414fcc9 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 refact: Split InternalModBreaks out of ModBreaks There are currently two competing ways of referring to a Breakpoint: 1. Using the Tick module + Tick index 2. Using the Info module + Info index 1. The Tick index is allocated during desugaring in `mkModBreaks`. It is used to refer to a breakpoint associated to a Core Tick. For a given Tick module, there are N Ticks indexed by Tick index. 2. The Info index is allocated during code generation (in StgToByteCode) and uniquely identifies the breakpoints at runtime (and is indeed used to determine which breakpoint was hit at runtime). Why we need both is described by Note [Breakpoint identifiers]. For every info index we used to keep a `CgBreakInfo`, a datatype containing information relevant to ByteCode Generation, in `ModBreaks`. This commit splits out the `IntMap CgBreakInfo` out of `ModBreaks` into a new datatype `InternalModBreaks`. - The purpose is to separate the `ModBreaks` datatype, which stores data associated from tick-level information which is fixed after desugaring, from the unrelated `IntMap CgBreakInfo` information accumulated during bytecode generation. - We move `ModBreaks` to GHC.HsToCore.Breakpoints The new `InternalModBreaks` simply combines the `IntMap CgBreakInfo` with `ModBreaks`. After code generation we construct an `InternalModBreaks` with the `CgBreakInfo`s we accumulated and the existing `ModBreaks` and store that in the compiled BCO in `bc_breaks`. - Note that we previously only updated the `modBreaks_breakInfo` field of `ModBreaks` at this exact location, and then stored the updated `ModBreaks` in the same `bc_breaks`. - We put this new datatype in GHC.ByteCode.Breakpoints The rest of the pipeline for which CgBreakInfo is relevant is accordingly updated to also use `InternalModBreaks` - - - - - 2a097955 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Use BreakpointIds in bytecode gen Small clean up to use BreakpointId and InternalBreakpointId more uniformly in bytecode generation rather than using Module + Ix pairs - - - - - 0515cc2f by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 ghci: Allocate BreakArrays at link time only Previously, a BreakArray would be allocated with a slot for every tick in a module at `mkModBreaks`, in HsToCore. However, this approach has a few downsides: - It interleaves interpreter behaviour (allocating arrays for breakpoints) within the desugarer - It is inflexible in the sense it is impossible for the bytecode generator to add "internal" breakpoints that can be triggered at runtime, because those wouldn't have a source tick. (This is relevant for our intended implementation plan of step-out in #26042) - It ties the BreakArray indices to the *tick* indexes, while at runtime we would rather just have the *info* indexes (currently we have both because BreakArrays are indexed by the *tick* one). Paving the way for #26042 and #26064, this commit moves the allocation of BreakArrays to bytecode-loading time -- akin to what is done for CCS arrays. Since a BreakArray is allocated only when bytecode is linked, if a breakpoint is set (e.g. `:break 10`) before the bytecode is linked, there will exist no BreakArray to trigger the breakpoint in. Therefore, the function to allocate break arrays (`allocateBreakArrays`) is exposed and also used in GHC.Runtime.Eval to allocate a break array when a breakpoint is set, if it doesn't exist yet (in the linker env). - - - - - 8016561f by Simon Peyton Jones at 2025-07-08T07:41:13-04:00 Add a test for T26176 - - - - - 454cd682 by Simon Peyton Jones at 2025-07-08T07:41:13-04:00 Add test for #14010 This test started to work in GHC 9.6 and has worked since. This MR just adds a regression test - - - - - ea2c6673 by Teo Camarasu at 2025-07-08T13:24:43-04:00 Implement user-defined allocation limit handlers Allocation Limits allow killing a thread if they allocate more than a user-specified limit. We extend this feature to allow more versatile behaviour. - We allow not killing the thread if the limit is exceeded. - We allow setting a custom handler to be called when the limit is exceeded. User-specified allocation limit handlers run in a fresh thread and are passed the ThreadId of the thread that exceeded its limit. We introduce utility functions for getting and setting the allocation limits of other threads, so that users can reset the limit of a thread from a handler. Both of these are somewhat coarse-grained as we are unaware of the allocations in the current nursery chunk. We provide several examples of usages in testsuite/tests/rts/T22859.hs Resolves #22859 - - - - - 03e047f9 by Simon Hengel at 2025-07-08T13:25:25-04:00 Fix typo in using.rst - - - - - 67957854 by Ben Gamari at 2025-07-09T09:44:44-04:00 compiler: Import AnnotationWrapper from ghc-internal Since `GHC.Desugar` exported from `base` has been deprecated. - - - - - 813d99d6 by Ben Gamari at 2025-07-09T09:44:44-04:00 ghc-compact: Eliminate dependency on ghc-prim - - - - - 0ec952a1 by Ben Gamari at 2025-07-09T09:44:44-04:00 ghc-heap: Eliminate dependency on ghc-prim - - - - - 480074c3 by Ben Gamari at 2025-07-09T09:44:44-04:00 ghc-heap: Drop redundant import - - - - - 03455829 by Ben Gamari at 2025-07-09T09:44:45-04:00 ghc-prim: Bump version to 0.13.1 There are no interface changes from 0.13.0 but the implementation now lives in `ghc-internal`. - - - - - d315345a by Ben Gamari at 2025-07-09T09:44:45-04:00 template-haskell: Bump version number to 2.24.0.0 Bumps exceptions submodule. - - - - - 004c800e by Ben Gamari at 2025-07-09T09:44:45-04:00 Bump GHC version number to 9.14 - - - - - eb1a3816 by Ben Gamari at 2025-07-09T09:44:45-04:00 Bump parsec to 3.1.18.0 Bumps parsec submodule. - - - - - 86f83296 by Ben Gamari at 2025-07-09T09:44:45-04:00 unix: Bump to 2.8.7.0 Bumps unix submodule. - - - - - 89e13998 by Ben Gamari at 2025-07-09T09:44:45-04:00 binary: Bump to 0.8.9.3 Bumps binary submodule. - - - - - 55fff191 by Ben Gamari at 2025-07-09T09:44:45-04:00 Win32: Bump to 2.14.2.0 Bumps Win32 submodule. - - - - - 7dafa40c by Ben Gamari at 2025-07-09T09:44:45-04:00 base: Bump version to 4.22.0 Bumps various submodules. - - - - - ef03d8b8 by Rodrigo Mesquita at 2025-07-09T09:45:28-04:00 base: Export displayExceptionWithInfo This function should be exposed from base following CLC#285 Approved change in CLC#344 Fixes #26058 - - - - - 49558e40 by Hassan Al-Awwadi at 2025-07-09T17:05:04+02:00 Add the option to depend on a directory. - - - - - c8bf3a56 by Hassan Al-Awwadi at 2025-07-09T17:05:04+02:00 this commit takes the previously defined getDirHash and moves it from Fingerprints module to being locally defined within GHC.Unit.Finder (which is lower in the module tree that GHC.HsToCore.Usage). This way we avoid altering GHC.Internals or base, which is maybe for the best, but one could argue it really does belong inside Fingerprint... - - - - - c305925d by Hassan Al-Awwadi at 2025-07-09T17:05:05+02:00 Added cases for UsageDirectory in the functions rnf, put_ and get - - - - - 344a2605 by Hassan Al-Awwadi at 2025-07-09T17:05:05+02:00 got letter wrong - - - - - b2ba16a8 by Hassan Al-Awwadi at 2025-07-09T17:05:05+02:00 more missing cases for UsageDirectory added and some clean up - - - - - 1ccbc961 by Hassan Al-Awwadi at 2025-07-09T17:05:05+02:00 the TH interface has been extended so the interface test should be updated - - - - - 4fcf3267 by Hassan Al-Awwadi at 2025-07-09T17:05:05+02:00 And the export list for TH.Syntax should obviously include addDependentDirectory now. Duh. - - - - - b7e4226a by Hassan Al-Awwadi at 2025-07-09T17:05:05+02:00 sort fingerprints before combining them to make getDirHash more robust - - - - - 0829dbc3 by Hassan Al-Awwadi at 2025-07-09T17:05:05+02:00 added a test for qAddDependentDirectory - - - - - 305dbe21 by Hassan Al-Awwadi at 2025-07-09T17:05:05+02:00 Fix test for addDependentDirectory, hopefully. The rest of the changes are just reversions of accidental additions and spelling/grammer changes. - - - - - 5277059e by Hassan Al-Awwadi at 2025-07-09T17:05:05+02:00 qAddDependentDirectory and addDependentDirectory now return a list of files too. addDependentDirectory_ adds the dependencies and ignores the output. - - - - - f5032082 by Hassan Al-Awwadi at 2025-07-09T17:05:05+02:00 interface test changed to include addDependentDirectory_ - - - - - a30a4e01 by Hassan Al-Awwadi at 2025-07-09T17:05:05+02:00 fixed test case for qAddDependentDirectory. At least, it works locally, so hopefully it works in the pipeline... - - - - - 201 changed files: - compiler/GHC.hs - compiler/GHC/Builtin/primops.txt.pp - compiler/GHC/ByteCode/Asm.hs - + compiler/GHC/ByteCode/Breakpoints.hs - compiler/GHC/ByteCode/Instr.hs - compiler/GHC/ByteCode/Linker.hs - compiler/GHC/ByteCode/Types.hs - compiler/GHC/Core/FVs.hs - compiler/GHC/Core/Lint.hs - compiler/GHC/Core/Map/Expr.hs - compiler/GHC/Core/Opt/OccurAnal.hs - compiler/GHC/Core/Opt/Simplify/Iteration.hs - compiler/GHC/Core/Ppr.hs - compiler/GHC/Core/Subst.hs - compiler/GHC/Core/Tidy.hs - compiler/GHC/Core/TyCon.hs - compiler/GHC/Core/Utils.hs - compiler/GHC/CoreToIface.hs - compiler/GHC/CoreToStg.hs - compiler/GHC/CoreToStg/Prep.hs - compiler/GHC/Driver/Config.hs - + compiler/GHC/Driver/Session/Inspect.hs - compiler/GHC/HsToCore.hs - compiler/GHC/HsToCore/Breakpoints.hs - compiler/GHC/HsToCore/Ticks.hs - compiler/GHC/HsToCore/Usage.hs - compiler/GHC/Iface/Make.hs - compiler/GHC/Iface/Recomp.hs - compiler/GHC/Iface/Recomp/Types.hs - compiler/GHC/Iface/Syntax.hs - compiler/GHC/Iface/Tidy.hs - compiler/GHC/IfaceToCore.hs - compiler/GHC/Linker/Loader.hs - compiler/GHC/Linker/Types.hs - compiler/GHC/Runtime/Debugger/Breakpoints.hs - compiler/GHC/Runtime/Eval.hs - compiler/GHC/Runtime/Eval/Types.hs - compiler/GHC/Runtime/Interpreter.hs - compiler/GHC/Runtime/Interpreter/Types.hs - compiler/GHC/Stg/BcPrep.hs - compiler/GHC/Stg/FVs.hs - compiler/GHC/StgToByteCode.hs - compiler/GHC/StgToCmm/Prim.hs - compiler/GHC/StgToJS/Prim.hs - compiler/GHC/Tc/Gen/Splice.hs - compiler/GHC/Tc/Types.hs - compiler/GHC/Tc/Utils/Monad.hs - − compiler/GHC/Types/Breakpoint.hs - compiler/GHC/Types/Tickish.hs - compiler/GHC/Unit/Finder.hs - compiler/GHC/Unit/Finder/Types.hs - compiler/GHC/Unit/Module/Deps.hs - compiler/GHC/Unit/Module/ModGuts.hs - compiler/ghc.cabal.in - configure.ac - docs/users_guide/exts/doandifthenelse.rst - docs/users_guide/exts/ffi.rst - docs/users_guide/ghci.rst - docs/users_guide/using.rst - ghc/GHCi/UI.hs - hadrian/src/Oracles/Flag.hs - hadrian/src/Rules/Generate.hs - hadrian/src/Settings/Builders/Cabal.hs - hadrian/src/Settings/Packages.hs - hadrian/src/Settings/Program.hs - libraries/Win32 - libraries/array - libraries/base/base.cabal.in - libraries/base/changelog.md - libraries/base/src/Control/Exception.hs - libraries/binary - libraries/deepseq - libraries/directory - libraries/exceptions - libraries/filepath - libraries/ghc-boot-th/ghc-boot-th.cabal.in - libraries/ghc-boot/ghc-boot.cabal.in - libraries/ghc-compact/GHC/Compact.hs - libraries/ghc-compact/GHC/Compact/Serialized.hs - libraries/ghc-compact/ghc-compact.cabal - libraries/ghc-experimental/ghc-experimental.cabal.in - + libraries/ghc-experimental/src/System/Mem/Experimental.hs - libraries/ghc-heap/GHC/Exts/Heap/Closures.hs - libraries/ghc-heap/GHC/Exts/Heap/FFIClosures_ProfilingDisabled.hsc - libraries/ghc-heap/GHC/Exts/Heap/FFIClosures_ProfilingEnabled.hsc - libraries/ghc-heap/GHC/Exts/Heap/Utils.hsc - libraries/ghc-heap/ghc-heap.cabal.in - libraries/ghc-heap/tests/parse_tso_flags.hs - libraries/ghc-internal/ghc-internal.cabal.in - + libraries/ghc-internal/src/GHC/Internal/AllocationLimitHandler.hs - libraries/ghc-internal/src/GHC/Internal/Exception/Type.hs - libraries/ghc-internal/src/GHC/Internal/List.hs - libraries/ghc-internal/src/GHC/Internal/TH/Syntax.hs - libraries/ghc-prim/changelog.md - libraries/ghc-prim/ghc-prim.cabal - + libraries/ghci/GHCi/Debugger.hs - libraries/ghci/GHCi/Message.hs - libraries/ghci/GHCi/Run.hs - libraries/ghci/GHCi/TH.hs - libraries/ghci/ghci.cabal.in - libraries/haskeline - libraries/hpc - libraries/os-string - libraries/parsec - libraries/process - libraries/semaphore-compat - libraries/stm - libraries/template-haskell/Language/Haskell/TH/Syntax.hs - libraries/template-haskell/template-haskell.cabal.in - libraries/terminfo - libraries/text - libraries/unix - + rts/AllocArray.c - + rts/AllocArray.h - rts/Disassembler.c - rts/Heap.c - rts/Interpreter.c - rts/Interpreter.h - rts/Prelude.h - rts/PrimOps.cmm - rts/RtsStartup.c - rts/RtsSymbols.c - rts/RtsUtils.c - rts/Schedule.c - rts/StgMiscClosures.cmm - rts/ThreadLabels.c - rts/Threads.c - rts/Weak.c - rts/external-symbols.list.in - rts/include/Rts.h - rts/include/rts/Bytecodes.h - rts/include/rts/Constants.h - rts/include/rts/prof/CCS.h - rts/include/rts/storage/Closures.h - rts/include/rts/storage/GC.h - rts/include/rts/storage/Heap.h - rts/include/rts/storage/TSO.h - rts/include/stg/MiscClosures.h - rts/rts.cabal - rts/sm/Storage.c - testsuite/.gitignore - testsuite/tests/backpack/cabal/bkpcabal08/bkpcabal08.stdout - testsuite/tests/count-deps/CountDepsAst.stdout - testsuite/tests/count-deps/CountDepsParser.stdout - + testsuite/tests/ghci.debugger/scripts/T26042b.hs - + testsuite/tests/ghci.debugger/scripts/T26042b.script - + testsuite/tests/ghci.debugger/scripts/T26042b.stdout - + testsuite/tests/ghci.debugger/scripts/T26042c.hs - + testsuite/tests/ghci.debugger/scripts/T26042c.script - + testsuite/tests/ghci.debugger/scripts/T26042c.stdout - + testsuite/tests/ghci.debugger/scripts/T26042d.hs - + testsuite/tests/ghci.debugger/scripts/T26042d.script - + testsuite/tests/ghci.debugger/scripts/T26042d.stdout - + testsuite/tests/ghci.debugger/scripts/T26042e.hs - + testsuite/tests/ghci.debugger/scripts/T26042e.script - + testsuite/tests/ghci.debugger/scripts/T26042e.stdout - + testsuite/tests/ghci.debugger/scripts/T26042f.hs - + testsuite/tests/ghci.debugger/scripts/T26042f.script - + testsuite/tests/ghci.debugger/scripts/T26042f1.stderr - + testsuite/tests/ghci.debugger/scripts/T26042f1.stdout - + testsuite/tests/ghci.debugger/scripts/T26042f2.stdout - + testsuite/tests/ghci.debugger/scripts/T26042g.hs - + testsuite/tests/ghci.debugger/scripts/T26042g.script - + testsuite/tests/ghci.debugger/scripts/T26042g.stdout - testsuite/tests/ghci.debugger/scripts/all.T - + testsuite/tests/indexed-types/should_fail/T26176.hs - + testsuite/tests/indexed-types/should_fail/T26176.stderr - testsuite/tests/indexed-types/should_fail/all.T - testsuite/tests/interface-stability/base-exports.stdout - testsuite/tests/interface-stability/base-exports.stdout-javascript-unknown-ghcjs - testsuite/tests/interface-stability/base-exports.stdout-mingw32 - testsuite/tests/interface-stability/base-exports.stdout-ws-32 - testsuite/tests/interface-stability/ghc-experimental-exports.stdout - testsuite/tests/interface-stability/ghc-experimental-exports.stdout-mingw32 - testsuite/tests/interface-stability/ghc-prim-exports.stdout - testsuite/tests/interface-stability/ghc-prim-exports.stdout-mingw32 - testsuite/tests/interface-stability/template-haskell-exports.stdout - + testsuite/tests/rts/T22859.hs - + testsuite/tests/rts/T22859.stderr - testsuite/tests/rts/all.T - testsuite/tests/th/Makefile - + testsuite/tests/th/TH_Depends_Dir.hs - + testsuite/tests/th/TH_Depends_Dir.stdout - + testsuite/tests/th/TH_Depends_Dir_External.hs - testsuite/tests/th/all.T - + testsuite/tests/typecheck/should_compile/T14010.hs - testsuite/tests/typecheck/should_compile/all.T - utils/haddock/CHANGES.md - utils/haddock/haddock-api/haddock-api.cabal - utils/haddock/haddock-api/src/Haddock/Interface/AttachInstances.hs - utils/haddock/haddock-api/src/Haddock/Interface/Create.hs - utils/haddock/haddock-api/src/Haddock/InterfaceFile.hs - utils/haddock/haddock-api/src/Haddock/Types.hs - utils/haddock/haddock-library/haddock-library.cabal - utils/haddock/haddock-test/haddock-test.cabal - utils/haddock/haddock-test/src/Test/Haddock/Config.hs - utils/haddock/haddock.cabal - utils/haddock/html-test/ref/Bug1004.html - + utils/haddock/html-test/ref/Bug25739.html - + utils/haddock/html-test/src/Bug25739.hs - utils/hsc2hs The diff was not included because it is too large. View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/d12c1e73efd6dcadd98b850f20bb84… -- View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/d12c1e73efd6dcadd98b850f20bb84… You're receiving this email because of your account on gitlab.haskell.org.

1 0