[Git][ghc/ghc][wip/marge_bot_batch_merge_job] 3 commits: debugger: Uniquely identify breakpoints by internal id

Marge Bot pushed to branch wip/marge_bot_batch_merge_job at Glasgow Haskell Compiler / GHC Commits: 99061362 by Rodrigo Mesquita at 2025-07-31T20:27:54-04:00 debugger: Uniquely identify breakpoints by internal id Since b85b11994e0130ff2401dd4bbdf52330e0bcf776 (support inlining breakpoints), a breakpoint has been identified at runtime by *two* pairs of . - The first, aka a 'BreakpointId', uniquely identifies a breakpoint in the source of a module by using the Tick index. A Tick index can index into ModBreaks.modBreaks_xxx to fetch source-level information about where that tick originated. - When a user specifies e.g. a line breakpoint using :break, we'll reverse engineer what a Tick index for that line - We update the `BreakArray` of that module (got from the LoaderState) at that tick index to `breakOn`. - A BCO we can stop at is headed by a BRK_FUN instruction. This instruction stores in an operand the `tick index` it is associated to. We look it up in the associated `BreakArray` (also an operand) and check wheter it was set to `breakOn`. - The second, aka the `ibi_info_mod` + `ibi_info_ix` of the `InternalBreakpointId`, uniquely index into the `imodBreaks_breakInfo` -- the information we gathered during code generation about the existing breakpoint *ocurrences*. - Note that with optimisation there may be many occurrences of the same source-tick-breakpoint across different modules. The `ibi_info_ix` is unique per occurrence, but the `bi_tick_ix` may be shared. See Note [Breakpoint identifiers] about this. - Note that besides the tick ids, info ids are also stored in `BRK_FUN` so the break handler can refer to the associated `CgBreakInfo`. In light of that, the driving changes come from the desire to have the info_id uniquely identify the breakpoint at runtime, and the source tick id being derived from it: - An InternalBreakpointId should uniquely identify a breakpoint just from the code-generation identifiers of `ibi_info_ix` and `ibi_info_mod`. So we drop `ibi_tick_mod` and `ibi_tick_ix`. - A BRK_FUN instruction need only record the "internal breakpoint id", not the tick-level id. So we drop the tick mod and tick index operands. - A BreakArray should be indexed by InternalBreakpointId rather than BreakpointId That means we need to do some more work when setting a breakpoint. Specifically, we need to figure out the internal ids (occurrences of a breakpoint) from the source-level BreakpointId we want to set the breakpoint at (recall :break refers to breaks at the source level). Besides this change being an improvement to the handling of breakpoints (it's clearer to have a single unique identifier than two competing ones), it unlocks the possibility of generating "internal" breakpoints during Cg (needed for #26042). It should also be easier to introduce multi-threaded-aware `BreakArrays` following this change (needed for #26064). Se also the new Note [ModBreaks vs InternalModBreaks] On i386-linux: ------------------------- Metric Decrease: interpreter_steplocal ------------------------- - - - - - e4786d76 by Simon Hengel at 2025-07-31T20:27:55-04:00 Don't use MCDiagnostic for `ghcExit` This changes the error message of `ghcExit` from ``` <no location info>: error: Compilation had errors ``` to ``` Compilation had errors ``` - - - - - f6714142 by Simon Hengel at 2025-07-31T20:27:55-04:00 Respect `-fdiagnostics-as-json` for driver diagnostics (see #24113) - - - - - 24 changed files: - compiler/GHC/ByteCode/Asm.hs - compiler/GHC/ByteCode/Breakpoints.hs - compiler/GHC/ByteCode/Instr.hs - compiler/GHC/ByteCode/Linker.hs - compiler/GHC/ByteCode/Types.hs - compiler/GHC/CoreToIface.hs - compiler/GHC/Driver/Make.hs - compiler/GHC/HsToCore/Breakpoints.hs - compiler/GHC/Linker/Loader.hs - compiler/GHC/Runtime/Debugger/Breakpoints.hs - compiler/GHC/Runtime/Eval.hs - compiler/GHC/Runtime/Interpreter.hs - compiler/GHC/StgToByteCode.hs - compiler/GHC/SysTools/Tasks.hs - compiler/GHC/Utils/Error.hs - ghc/GHCi/UI.hs - ghc/GHCi/UI/Monad.hs - libraries/ghci/GHCi/Debugger.hs - libraries/ghci/GHCi/Message.hs - libraries/ghci/GHCi/Run.hs - rts/Disassembler.c - rts/Exception.cmm - rts/Interpreter.c - testsuite/tests/corelint/T21115b.stderr Changes: ===================================== compiler/GHC/ByteCode/Asm.hs ===================================== @@ -841,24 +841,18 @@ assembleI platform i = case i of W8 -> emit_ bci_OP_INDEX_ADDR_08 [] _ -> unsupported_width - BRK_FUN (InternalBreakpointId tick_mod tickx info_mod infox) -> do + BRK_FUN ibi@(InternalBreakpointId info_mod infox) -> do + p1 <- ptr $ BCOPtrBreakArray info_mod let -- cast that checks that round-tripping through Word16 doesn't change the value toW16 x = let r = fromIntegral x :: Word16 in if fromIntegral r == x then r else pprPanic "schemeER_wrk: breakpoint tick/info index too large!" (ppr x) - p1 <- ptr $ BCOPtrBreakArray tick_mod - tick_addr <- lit1 $ BCONPtrFS $ moduleNameFS $ moduleName tick_mod - info_addr <- lit1 $ BCONPtrFS $ moduleNameFS $ moduleName info_mod - tick_unitid_addr <- lit1 $ BCONPtrFS $ unitIdFS $ moduleUnitId $ tick_mod - info_unitid_addr <- lit1 $ BCONPtrFS $ unitIdFS $ moduleUnitId $ info_mod - np <- lit1 $ BCONPtrCostCentre (BreakpointId tick_mod tickx) - emit_ bci_BRK_FUN [ Op p1 - , Op tick_addr, Op info_addr - , Op tick_unitid_addr, Op info_unitid_addr - , SmallOp (toW16 tickx), SmallOp (toW16 infox) - , Op np - ] + info_addr <- lit1 $ BCONPtrFS $ moduleNameFS $ moduleName info_mod + info_unitid_addr <- lit1 $ BCONPtrFS $ unitIdFS $ moduleUnitId info_mod + np <- lit1 $ BCONPtrCostCentre ibi + emit_ bci_BRK_FUN [ Op p1, Op info_addr, Op info_unitid_addr + , SmallOp (toW16 infox), Op np ] BRK_ALTS active -> emit_ bci_BRK_ALTS [SmallOp (if active then 1 else 0)] ===================================== compiler/GHC/ByteCode/Breakpoints.hs ===================================== @@ -7,23 +7,23 @@ -- 'InternalModBreaks', and is uniquely identified at runtime by an -- 'InternalBreakpointId'. -- --- See Note [Breakpoint identifiers] +-- See Note [ModBreaks vs InternalModBreaks] and Note [Breakpoint identifiers] module GHC.ByteCode.Breakpoints ( -- * Internal Mod Breaks InternalModBreaks(..), CgBreakInfo(..) - , mkInternalModBreaks + , mkInternalModBreaks, imodBreaks_module -- ** Internal breakpoint identifier , InternalBreakpointId(..), BreakInfoIndex -- * Operations - , toBreakpointId -- ** Internal-level operations - , getInternalBreak, addInternalBreak + , getInternalBreak -- ** Source-level information operations , getBreakLoc, getBreakVars, getBreakDecls, getBreakCCS + , getBreakSourceId -- * Utils , seqInternalModBreaks @@ -47,6 +47,31 @@ import GHC.Utils.Panic import Data.Array {- +Note [ModBreaks vs InternalModBreaks] +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +'ModBreaks' and 'BreakpointId's must not to be confused with +'InternalModBreaks' and 'InternalBreakId's. + +'ModBreaks' is constructed once during HsToCore from the information attached +to source-level breakpoint ticks and is never changed afterwards. A 'ModBreaks' +can be queried using 'BreakpointId's, which uniquely identifies a breakpoint +within the list of breakpoint information for a given module's 'ModBreaks'. + +'InternalModBreaks' are constructed during bytecode generation and are indexed +by a 'InternalBreakpointId'. They contain all the information relevant to a +breakpoint for code generation that can be accessed during runtime execution +(such as a 'BreakArray' for triggering breakpoints). 'InternalBreakpointId's +are used at runtime to trigger and inspect breakpoints -- a 'BRK_FUN' +instruction receives 'InternalBreakpointId' as an argument. + +We keep a mapping from 'InternalModBreaks' to a 'BreakpointId', which can then be used +to get source-level information about a breakpoint via the corresponding 'ModBreaks'. + +Notably, 'InternalModBreaks' can contain entries for so-called internal +breakpoints, which do not necessarily have a source-level location attached to +it (i.e. do not have a matching entry in 'ModBreaks'). We may leverage this to +introduce breakpoints during code generation for features such as stepping-out. + Note [Breakpoint identifiers] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Before optimization a breakpoint is identified uniquely with a tick module @@ -64,6 +89,10 @@ So every breakpoint occurrence gets assigned a module-unique *info index* and we store it alongside the occurrence module (*info module*) in the 'InternalBreakpointId' datatype. This is the index that we use at runtime to identify a breakpoint. + +When the internal breakpoint has a matching tick-level breakpoint we can fetch +the related tick-level information by first looking up a mapping +@'InternalBreakpointId' -> 'BreakpointId'@ in @'CgBreakInfo'@. -} -------------------------------------------------------------------------------- @@ -78,19 +107,11 @@ type BreakInfoIndex = Int -- Indexes into the structures in the @'InternalModBreaks'@ produced during ByteCode generation. -- See Note [Breakpoint identifiers] data InternalBreakpointId = InternalBreakpointId - { ibi_tick_mod :: !Module -- ^ Breakpoint tick module - , ibi_tick_index :: !Int -- ^ Breakpoint tick index - , ibi_info_mod :: !Module -- ^ Breakpoint tick module - , ibi_info_index :: !BreakInfoIndex -- ^ Breakpoint tick index + { ibi_info_mod :: !Module -- ^ Breakpoint info module + , ibi_info_index :: !BreakInfoIndex -- ^ Breakpoint info index } deriving (Eq, Ord) -toBreakpointId :: InternalBreakpointId -> BreakpointId -toBreakpointId ibi = BreakpointId - { bi_tick_mod = ibi_tick_mod ibi - , bi_tick_index = ibi_tick_index ibi - } - -------------------------------------------------------------------------------- -- * Internal Mod Breaks -------------------------------------------------------------------------------- @@ -107,18 +128,34 @@ data InternalModBreaks = InternalModBreaks -- 'InternalBreakpointId'. , imodBreaks_modBreaks :: !ModBreaks - -- ^ Store the original ModBreaks for this module, unchanged. - -- Allows us to query about source-level breakpoint information using - -- an internal breakpoint id. + -- ^ Store the ModBreaks for this module + -- + -- Recall Note [Breakpoint identifiers]: for some module A, an + -- *occurrence* of a breakpoint in A may have been inlined from some + -- breakpoint *defined* in module B. + -- + -- This 'ModBreaks' contains information regarding all the breakpoints + -- defined in the module this 'InternalModBreaks' corresponds to. It + -- /does not/ necessarily have information regarding all the breakpoint + -- occurrences registered in 'imodBreaks_breakInfo'. Some of those + -- occurrences may refer breakpoints inlined from other modules. } --- | Construct an 'InternalModBreaks' +-- | Construct an 'InternalModBreaks'. +-- +-- INVARIANT: The given 'ModBreaks' correspond to the same module as this +-- 'InternalModBreaks' module (the first argument) and its breakpoint infos +-- (the @IntMap CgBreakInfo@ argument) mkInternalModBreaks :: Module -> IntMap CgBreakInfo -> ModBreaks -> InternalModBreaks mkInternalModBreaks mod im mbs = assertPpr (mod == modBreaks_module mbs) (text "Constructing InternalModBreaks with the ModBreaks of a different module!") $ InternalModBreaks im mbs +-- | Get the module to which these 'InternalModBreaks' correspond +imodBreaks_module :: InternalModBreaks -> Module +imodBreaks_module = modBreaks_module . imodBreaks_modBreaks + -- | Information about a breakpoint that we know at code-generation time -- In order to be used, this needs to be hydrated relative to the current HscEnv by -- 'hydrateCgBreakInfo'. Everything here can be fully forced and that's critical for @@ -128,20 +165,22 @@ data CgBreakInfo { cgb_tyvars :: ![IfaceTvBndr] -- ^ Type variables in scope at the breakpoint , cgb_vars :: ![Maybe (IfaceIdBndr, Word)] , cgb_resty :: !IfaceType + , cgb_tick_id :: !BreakpointId + -- ^ This field records the original breakpoint tick identifier for this + -- internal breakpoint info. It is used to convert a breakpoint + -- *occurrence* index ('InternalBreakpointId') into a *definition* index + -- ('BreakpointId'). + -- + -- The modules of breakpoint occurrence and breakpoint definition are not + -- necessarily the same: See Note [Breakpoint identifiers]. } -- See Note [Syncing breakpoint info] in GHC.Runtime.Eval -- | Get an internal breakpoint info by 'InternalBreakpointId' getInternalBreak :: InternalBreakpointId -> InternalModBreaks -> CgBreakInfo -getInternalBreak (InternalBreakpointId _ _ info_mod info_ix) imbs = - assert_modules_match info_mod (modBreaks_module $ imodBreaks_modBreaks imbs) $ - imodBreaks_breakInfo imbs IM.! info_ix - --- | Add a CgBreakInfo to an 'InternalModBreaks' at 'InternalBreakpointId' -addInternalBreak :: InternalBreakpointId -> CgBreakInfo -> InternalModBreaks -> InternalModBreaks -addInternalBreak (InternalBreakpointId _ _ info_mod info_ix) info imbs = - assert_modules_match info_mod (modBreaks_module $ imodBreaks_modBreaks imbs) $ - imbs{imodBreaks_breakInfo = IM.insert info_ix info (imodBreaks_breakInfo imbs)} +getInternalBreak (InternalBreakpointId mod ix) imbs = + assert_modules_match mod (imodBreaks_module imbs) $ + imodBreaks_breakInfo imbs IM.! ix -- | Assert that the module in the 'InternalBreakpointId' and in -- 'InternalModBreaks' match. @@ -155,27 +194,56 @@ assert_modules_match ibi_mod imbs_mod = -- Tick-level Breakpoint information -------------------------------------------------------------------------------- +-- | Get the source module and tick index for this breakpoint +-- (as opposed to the module where this breakpoint occurs, which is in 'InternalBreakpointId') +getBreakSourceId :: InternalBreakpointId -> InternalModBreaks -> BreakpointId +getBreakSourceId (InternalBreakpointId ibi_mod ibi_ix) imbs = + assert_modules_match ibi_mod (imodBreaks_module imbs) $ + let cgb = imodBreaks_breakInfo imbs IM.! ibi_ix + in cgb_tick_id cgb + -- | Get the source span for this breakpoint -getBreakLoc :: InternalBreakpointId -> InternalModBreaks -> SrcSpan +getBreakLoc :: (Module -> IO ModBreaks) -> InternalBreakpointId -> InternalModBreaks -> IO SrcSpan getBreakLoc = getBreakXXX modBreaks_locs -- | Get the vars for this breakpoint -getBreakVars :: InternalBreakpointId -> InternalModBreaks -> [OccName] +getBreakVars :: (Module -> IO ModBreaks) -> InternalBreakpointId -> InternalModBreaks -> IO [OccName] getBreakVars = getBreakXXX modBreaks_vars -- | Get the decls for this breakpoint -getBreakDecls :: InternalBreakpointId -> InternalModBreaks -> [String] +getBreakDecls :: (Module -> IO ModBreaks) -> InternalBreakpointId -> InternalModBreaks -> IO [String] getBreakDecls = getBreakXXX modBreaks_decls -- | Get the decls for this breakpoint -getBreakCCS :: InternalBreakpointId -> InternalModBreaks -> (String, String) +getBreakCCS :: (Module -> IO ModBreaks) -> InternalBreakpointId -> InternalModBreaks -> IO (String, String) getBreakCCS = getBreakXXX modBreaks_ccs -- | Internal utility to access a ModBreaks field at a particular breakpoint index -getBreakXXX :: (ModBreaks -> Array BreakTickIndex a) -> InternalBreakpointId -> InternalModBreaks -> a -getBreakXXX view (InternalBreakpointId tick_mod tick_id _ _) imbs = - assert_modules_match tick_mod (modBreaks_module $ imodBreaks_modBreaks imbs) $ do - view (imodBreaks_modBreaks imbs) ! tick_id +-- +-- Recall Note [Breakpoint identifiers]: the internal breakpoint module (the +-- *occurrence* module) doesn't necessarily match the module where the +-- tick breakpoint was defined with the relevant 'ModBreaks'. +-- +-- When the tick module is the same as the internal module, we use the stored +-- 'ModBreaks'. When the tick module is different, we need to look up the +-- 'ModBreaks' in the HUG for that other module. +-- +-- To avoid cyclic dependencies, we instead receive a function that looks up +-- the 'ModBreaks' given a 'Module' +getBreakXXX :: (ModBreaks -> Array BreakTickIndex a) -> (Module -> IO ModBreaks) -> InternalBreakpointId -> InternalModBreaks -> IO a +getBreakXXX view lookupModule (InternalBreakpointId ibi_mod ibi_ix) imbs = + assert_modules_match ibi_mod (imodBreaks_module imbs) $ do + let cgb = imodBreaks_breakInfo imbs IM.! ibi_ix + case cgb_tick_id cgb of + BreakpointId{bi_tick_mod, bi_tick_index} + | bi_tick_mod == ibi_mod + -> do + let these_mbs = imodBreaks_modBreaks imbs + return $ view these_mbs ! bi_tick_index + | otherwise + -> do + other_mbs <- lookupModule bi_tick_mod + return $ view other_mbs ! bi_tick_index -------------------------------------------------------------------------------- -- Instances @@ -190,7 +258,8 @@ seqInternalModBreaks InternalModBreaks{..} = seqCgBreakInfo CgBreakInfo{..} = rnf cgb_tyvars `seq` rnf cgb_vars `seq` - rnf cgb_resty + rnf cgb_resty `seq` + rnf cgb_tick_id instance Outputable InternalBreakpointId where ppr InternalBreakpointId{..} = @@ -203,4 +272,5 @@ instance NFData InternalBreakpointId where instance Outputable CgBreakInfo where ppr info = text "CgBreakInfo" <+> parens (ppr (cgb_vars info) <+> - ppr (cgb_resty info)) + ppr (cgb_resty info) <+> + ppr (cgb_tick_id info)) ===================================== compiler/GHC/ByteCode/Instr.hs ===================================== @@ -454,9 +454,8 @@ instance Outputable BCInstr where ppr ENTER = text "ENTER" ppr (RETURN pk) = text "RETURN " <+> ppr pk ppr (RETURN_TUPLE) = text "RETURN_TUPLE" - ppr (BRK_FUN (InternalBreakpointId tick_mod tickx info_mod infox)) + ppr (BRK_FUN (InternalBreakpointId info_mod infox)) = text "BRK_FUN" <+> text "<breakarray>" - <+> ppr tick_mod <+> ppr tickx <+> ppr info_mod <+> ppr infox <+> text "<cc>" ppr (BRK_ALTS active) = text "BRK_ALTS" <+> ppr active ===================================== compiler/GHC/ByteCode/Linker.hs ===================================== @@ -98,9 +98,9 @@ lookupLiteral interp pkgs_loaded le lb ptr = case ptr of BCONPtrFFIInfo (FFIInfo {..}) -> do RemotePtr p <- interpCmd interp $ PrepFFI ffiInfoArgs ffiInfoRet pure $ fromIntegral p - BCONPtrCostCentre BreakpointId{..} + BCONPtrCostCentre InternalBreakpointId{..} | interpreterProfiled interp -> do - case expectJust (lookupModuleEnv (ccs_env lb) bi_tick_mod) ! bi_tick_index of + case expectJust (lookupModuleEnv (ccs_env lb) ibi_info_mod) ! ibi_info_index of RemotePtr p -> pure $ fromIntegral p | otherwise -> case toRemotePtr nullPtr of ===================================== compiler/GHC/ByteCode/Types.hs ===================================== @@ -285,7 +285,7 @@ data BCONPtr -- | A libffi ffi_cif function prototype. | BCONPtrFFIInfo !FFIInfo -- | A 'CostCentre' remote pointer array's respective 'BreakpointId' - | BCONPtrCostCentre !BreakpointId + | BCONPtrCostCentre !InternalBreakpointId instance NFData BCONPtr where rnf x = x `seq` () ===================================== compiler/GHC/CoreToIface.hs ===================================== @@ -704,12 +704,13 @@ toIfaceLFInfo nm lfi = case lfi of -- Dehydrating CgBreakInfo -dehydrateCgBreakInfo :: [TyVar] -> [Maybe (Id, Word)] -> Type -> CgBreakInfo -dehydrateCgBreakInfo ty_vars idOffSets tick_ty = +dehydrateCgBreakInfo :: [TyVar] -> [Maybe (Id, Word)] -> Type -> BreakpointId -> CgBreakInfo +dehydrateCgBreakInfo ty_vars idOffSets tick_ty bid = CgBreakInfo { cgb_tyvars = map toIfaceTvBndr ty_vars , cgb_vars = map (fmap (\(i, offset) -> (toIfaceIdBndr i, offset))) idOffSets , cgb_resty = toIfaceType tick_ty + , cgb_tick_id = bid } {- Note [Inlining and hs-boot files] ===================================== compiler/GHC/Driver/Make.hs ===================================== @@ -1552,7 +1552,7 @@ wrapAction msg_wrapper hsc_env k = do -- ThreadKilled in particular needs to actually kill the thread. -- So rethrow that and the other async exceptions Just (err :: SomeAsyncException) -> throwIO err - _ -> errorMsg lcl_logger (text (show exc)) + _ -> reportError lcl_logger neverQualify emptyDiagOpts noSrcSpan (text (show exc)) return Nothing ===================================== compiler/GHC/HsToCore/Breakpoints.hs ===================================== @@ -12,7 +12,7 @@ -- 'InternalModBreaks' and 'InternalBreakId's. The latter are constructed -- during bytecode generation and can be found in 'GHC.ByteCode.Breakpoints'. -- --- See Note [Breakpoint identifiers] +-- See Note [ModBreaks vs InternalModBreaks] and Note [Breakpoint identifiers] module GHC.HsToCore.Breakpoints ( -- * ModBreaks mkModBreaks, ModBreaks(..) ===================================== compiler/GHC/Linker/Loader.hs ===================================== @@ -43,6 +43,7 @@ import GHC.Settings import GHC.Platform import GHC.Platform.Ways +import GHC.Driver.Errors import GHC.Driver.Phases import GHC.Driver.Env import GHC.Driver.Session @@ -50,7 +51,7 @@ import GHC.Driver.Ppr import GHC.Driver.Config.Diagnostic import GHC.Driver.Config.Finder -import GHC.Tc.Utils.Monad +import GHC.Tc.Utils.Monad hiding (reportDiagnostic) import GHC.Runtime.Interpreter import GHCi.BreakArray @@ -124,7 +125,9 @@ import GHC.Utils.Exception import GHC.Unit.Home.Graph (lookupHug, unitEnv_foldWithKey) import GHC.Driver.Downsweep import qualified GHC.Runtime.Interpreter as GHCi -import Data.Array.Base (numElements) +import qualified Data.IntMap.Strict as IM +import qualified Data.Map.Strict as M +import Foreign.Ptr (nullPtr) -- Note [Linkers and loaders] -- ~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -1307,9 +1310,9 @@ load_dyn interp hsc_env crash_early dll = do then cmdLineErrorIO err else do when (diag_wopt Opt_WarnMissedExtraSharedLib diag_opts) - $ logMsg logger - (mkMCDiagnostic diag_opts (WarningWithFlag Opt_WarnMissedExtraSharedLib) Nothing) - noSrcSpan $ withPprStyle defaultUserStyle (note err) + $ reportDiagnostic logger + neverQualify diag_opts + noSrcSpan (WarningWithFlag Opt_WarnMissedExtraSharedLib) $ withPprStyle defaultUserStyle (note err) pure Nothing where diag_opts = initDiagOpts (hsc_dflags hsc_env) @@ -1497,8 +1500,7 @@ locateLib interp hsc_env is_hs lib_dirs gcc_dirs lib0 , not loading_dynamic_hs_libs , interpreterProfiled interp = do - let diag = mkMCDiagnostic diag_opts WarningWithoutFlag Nothing - logMsg logger diag noSrcSpan $ withPprStyle defaultErrStyle $ + reportDiagnostic logger neverQualify diag_opts noSrcSpan WarningWithoutFlag $ withPprStyle defaultErrStyle $ text "Interpreter failed to load profiled static library" <+> text lib <> char '.' $$ text " \tTrying dynamic library instead. If this fails try to rebuild" <+> text "libraries with profiling support." @@ -1666,10 +1668,10 @@ allocateBreakArrays :: IO (ModuleEnv (ForeignRef BreakArray)) allocateBreakArrays interp = foldlM - ( \be0 InternalModBreaks{imodBreaks_modBreaks=ModBreaks {..}} -> do + ( \be0 InternalModBreaks{imodBreaks_breakInfo, imodBreaks_modBreaks=ModBreaks {..}} -> do -- If no BreakArray is assigned to this module yet, create one if not $ elemModuleEnv modBreaks_module be0 then do - let count = numElements modBreaks_locs + let count = maybe 0 ((+1) . fst) $ IM.lookupMax imodBreaks_breakInfo breakArray <- GHCi.newBreakArray interp count evaluate $ extendModuleEnv be0 modBreaks_module breakArray else @@ -1679,29 +1681,51 @@ allocateBreakArrays interp = -- | Given a list of 'InternalModBreaks' collected from a list -- of 'CompiledByteCode', allocate the 'CostCentre' arrays when profiling is -- enabled. +-- +-- Note that the resulting arrays are indexed by 'BreakInfoIndex' (internal +-- breakpoint index), not by tick index allocateCCS :: Interp -> - ModuleEnv (Array BreakTickIndex (RemotePtr CostCentre)) -> + ModuleEnv (Array BreakInfoIndex (RemotePtr CostCentre)) -> [InternalModBreaks] -> - IO (ModuleEnv (Array BreakTickIndex (RemotePtr CostCentre))) + IO (ModuleEnv (Array BreakInfoIndex (RemotePtr CostCentre))) allocateCCS interp ce mbss - | interpreterProfiled interp = - foldlM - ( \ce0 InternalModBreaks{imodBreaks_modBreaks=ModBreaks {..}} -> do - ccs <- + | interpreterProfiled interp = do + -- 1. Create a mapping from source BreakpointId to CostCentre ptr + ccss <- M.unions <$> mapM + ( \InternalModBreaks{imodBreaks_modBreaks=ModBreaks{..}} -> do + ccs <- {- one ccs ptr per tick index -} mkCostCentres interp (moduleNameString $ moduleName modBreaks_module) (elems modBreaks_ccs) - if not $ elemModuleEnv modBreaks_module ce0 then do - evaluate $ - extendModuleEnv ce0 modBreaks_module $ - listArray - (0, length ccs - 1) - ccs + return $ M.fromList $ + zipWith (\el ix -> (BreakpointId modBreaks_module ix, el)) ccs [0..] + ) + mbss + -- 2. Create an array with one element for every InternalBreakpointId, + -- where every element has the CCS for the corresponding BreakpointId + foldlM + (\ce0 InternalModBreaks{imodBreaks_breakInfo, imodBreaks_modBreaks=ModBreaks{..}} -> do + if not $ elemModuleEnv modBreaks_module ce then do + let count = maybe 0 ((+1) . fst) $ IM.lookupMax imodBreaks_breakInfo + let ccs = IM.map + (\info -> + fromMaybe (toRemotePtr nullPtr) + (M.lookup (cgb_tick_id info) ccss) + ) + imodBreaks_breakInfo + assertPpr (count == length ccs) + (text "expected CgBreakInfo map to have one entry per valid ix") $ + evaluate $ + extendModuleEnv ce0 modBreaks_module $ + listArray + (0, count) + (IM.elems ccs) else return ce0 ) ce mbss + | otherwise = pure ce ===================================== compiler/GHC/Runtime/Debugger/Breakpoints.hs ===================================== @@ -31,6 +31,9 @@ import GHC.Unit.Module.ModSummary import GHC.Utils.Outputable import GHC.Utils.Panic import qualified GHC.Data.Strict as Strict +import qualified Data.IntMap.Strict as IntMap +import qualified GHC.Unit.Home.Graph as HUG +import qualified GHC.Unit.Home.PackageTable as HPT -------------------------------------------------------------------------------- -- Finding Module breakpoints @@ -213,6 +216,47 @@ getModBreak m = do mod_info <- fromMaybe (panic "getModBreak") <$> getModuleInfo m pure $ imodBreaks_modBreaks <$> modInfoModBreaks mod_info +-------------------------------------------------------------------------------- +-- Mapping source-level BreakpointIds to IBI occurrences +-- (See Note [Breakpoint identifiers]) +-------------------------------------------------------------------------------- + +-- | A source-level breakpoint may have been inlined into many occurrences, now +-- referred by 'InternalBreakpointId'. When a breakpoint is set on a certain +-- source breakpoint, it means all *ocurrences* of that breakpoint across +-- modules should be stopped at -- hence we keep a trie from BreakpointId to +-- the list of internal break ids using it. +-- See also Note [Breakpoint identifiers] +type BreakpointOccurrences = ModuleEnv (IntMap.IntMap [InternalBreakpointId]) + +-- | Lookup all InternalBreakpointIds matching the given BreakpointId +-- Nothing if BreakpointId not in map +lookupBreakpointOccurrences :: BreakpointOccurrences -> BreakpointId -> Maybe [InternalBreakpointId] +lookupBreakpointOccurrences bmp (BreakpointId md tick) = + lookupModuleEnv bmp md >>= IntMap.lookup tick + +-- | Construct a mapping from Source 'BreakpointId's to 'InternalBreakpointId's from the given list of 'ModInfo's +mkBreakpointOccurrences :: forall m. GhcMonad m => m BreakpointOccurrences +mkBreakpointOccurrences = do + hug <- hsc_HUG <$> getSession + liftIO $ foldr go (pure emptyModuleEnv) hug + where + go :: HUG.HomeUnitEnv -> IO BreakpointOccurrences -> IO BreakpointOccurrences + go hue mbmp = do + bmp <- mbmp + ibrkss <- HPT.concatHpt (\hmi -> maybeToList (getModBreaks hmi)) + (HUG.homeUnitEnv_hpt hue) + return $ foldr addBreakToMap bmp ibrkss + + addBreakToMap :: InternalModBreaks -> BreakpointOccurrences -> BreakpointOccurrences + addBreakToMap ibrks bmp0 = do + let imod = modBreaks_module $ imodBreaks_modBreaks ibrks + IntMap.foldrWithKey (\info_ix cgi bmp -> do + let ibi = InternalBreakpointId imod info_ix + let BreakpointId tick_mod tick_ix = cgb_tick_id cgi + extendModuleEnvWith (IntMap.unionWith (S.<>)) bmp tick_mod (IntMap.singleton tick_ix [ibi]) + ) bmp0 (imodBreaks_breakInfo ibrks) + -------------------------------------------------------------------------------- -- Getting current breakpoint information -------------------------------------------------------------------------------- @@ -235,9 +279,15 @@ getCurrentBreakSpan = do getCurrentBreakModule :: GhcMonad m => m (Maybe Module) getCurrentBreakModule = do resumes <- getResumeContext - return $ case resumes of - [] -> Nothing + hug <- hsc_HUG <$> getSession + liftIO $ case resumes of + [] -> pure Nothing (r:_) -> case resumeHistoryIx r of - 0 -> ibi_tick_mod <$> resumeBreakpointId r - ix -> Just $ getHistoryModule $ resumeHistory r !! (ix-1) + 0 -> case resumeBreakpointId r of + Nothing -> pure Nothing + Just ibi -> do + brks <- readIModBreaks hug ibi + return $ Just $ bi_tick_mod $ getBreakSourceId ibi brks + ix -> + Just <$> getHistoryModule hug (resumeHistory r !! (ix-1)) ===================================== compiler/GHC/Runtime/Eval.hs ===================================== @@ -18,7 +18,7 @@ module GHC.Runtime.Eval ( abandon, abandonAll, getResumeContext, getHistorySpan, - getModBreaks, readModBreaks, + getModBreaks, readIModBreaks, readIModModBreaks, getHistoryModule, setupBreakpoint, back, forward, @@ -147,14 +147,17 @@ getResumeContext = withSession (return . ic_resume . hsc_IC) mkHistory :: HUG.HomeUnitGraph -> ForeignHValue -> InternalBreakpointId -> IO History mkHistory hug hval ibi = History hval ibi <$> findEnclosingDecls hug ibi -getHistoryModule :: History -> Module -getHistoryModule = ibi_tick_mod . historyBreakpointId +getHistoryModule :: HUG.HomeUnitGraph -> History -> IO Module +getHistoryModule hug hist = do + let ibi = historyBreakpointId hist + brks <- readIModBreaks hug ibi + return $ bi_tick_mod $ getBreakSourceId ibi brks getHistorySpan :: HUG.HomeUnitGraph -> History -> IO SrcSpan getHistorySpan hug hist = do let ibi = historyBreakpointId hist - brks <- readModBreaks hug (ibi_tick_mod ibi) - return $ getBreakLoc ibi brks + brks <- readIModBreaks hug ibi + getBreakLoc (readIModModBreaks hug) ibi brks {- | Finds the enclosing top level function name -} -- ToDo: a better way to do this would be to keep hold of the decl_path computed @@ -162,8 +165,8 @@ getHistorySpan hug hist = do -- for each tick. findEnclosingDecls :: HUG.HomeUnitGraph -> InternalBreakpointId -> IO [String] findEnclosingDecls hug ibi = do - brks <- readModBreaks hug (ibi_tick_mod ibi) - return $ getBreakDecls ibi brks + brks <- readIModBreaks hug ibi + getBreakDecls (readIModModBreaks hug) ibi brks -- | Update fixity environment in the current interactive context. updateFixityEnv :: GhcMonad m => FixityEnv -> m () @@ -350,15 +353,14 @@ handleRunStatus step expr bindings final_ids status history0 = do EvalBreak apStack_ref (Just eval_break) resume_ctxt ccs -> do let ibi = evalBreakpointToId eval_break let hug = hsc_HUG hsc_env - tick_brks <- liftIO $ readModBreaks hug (ibi_tick_mod ibi) - let - span = getBreakLoc ibi tick_brks - decl = intercalate "." $ getBreakDecls ibi tick_brks + info_brks <- liftIO $ readIModBreaks hug ibi + span <- liftIO $ getBreakLoc (readIModModBreaks hug) ibi info_brks + decl <- liftIO $ intercalate "." <$> getBreakDecls (readIModModBreaks hug) ibi info_brks -- Was this breakpoint explicitly enabled (ie. in @BreakArray@)? bactive <- liftIO $ do - breakArray <- getBreakArray interp (toBreakpointId ibi) tick_brks - breakpointStatus interp breakArray (ibi_tick_index ibi) + breakArray <- getBreakArray interp ibi info_brks + breakpointStatus interp breakArray (ibi_info_index ibi) apStack_fhv <- liftIO $ mkFinalizedHValue interp apStack_ref resume_ctxt_fhv <- liftIO $ mkFinalizedHValue interp resume_ctxt @@ -446,7 +448,7 @@ resumeExec step mbCnt -- When the user specified a break ignore count, set it -- in the interpreter case (mb_brkpt, mbCnt) of - (Just brkpt, Just cnt) -> setupBreakpoint interp (toBreakpointId brkpt) cnt + (Just brkpt, Just cnt) -> setupBreakpoint interp brkpt cnt _ -> return () let eval_opts = initEvalOpts dflags (enableGhcStepMode step) @@ -462,17 +464,18 @@ resumeExec step mbCnt | otherwise -> pure prevHistoryLst handleRunStatus step expr bindings final_ids status =<< hist' -setupBreakpoint :: GhcMonad m => Interp -> BreakpointId -> Int -> m () -- #19157 -setupBreakpoint interp bi cnt = do +setupBreakpoint :: GhcMonad m => Interp -> InternalBreakpointId -> Int -> m () -- #19157 +setupBreakpoint interp ibi cnt = do hug <- hsc_HUG <$> getSession - modBreaks <- liftIO $ readModBreaks hug (bi_tick_mod bi) - breakArray <- liftIO $ getBreakArray interp bi modBreaks - liftIO $ GHCi.storeBreakpoint interp breakArray (bi_tick_index bi) cnt + liftIO $ do + modBreaks <- readIModBreaks hug ibi + breakArray <- getBreakArray interp ibi modBreaks + GHCi.storeBreakpoint interp breakArray (ibi_info_index ibi) cnt -getBreakArray :: Interp -> BreakpointId -> InternalModBreaks -> IO (ForeignRef BreakArray) -getBreakArray interp BreakpointId{bi_tick_mod} imbs = do +getBreakArray :: Interp -> InternalBreakpointId -> InternalModBreaks -> IO (ForeignRef BreakArray) +getBreakArray interp InternalBreakpointId{ibi_info_mod} imbs = do breaks0 <- linked_breaks . fromMaybe (panic "Loader not initialised") <$> getLoaderState interp - case lookupModuleEnv (breakarray_env breaks0) bi_tick_mod of + case lookupModuleEnv (breakarray_env breaks0) ibi_info_mod of Just ba -> return ba Nothing -> do modifyLoaderState interp $ \ld_st -> do @@ -483,13 +486,12 @@ getBreakArray interp BreakpointId{bi_tick_mod} imbs = do ba_env <- allocateBreakArrays interp (breakarray_env lb) [imbs] let ld_st' = ld_st { linked_breaks = lb{breakarray_env = ba_env} } - let ba = expectJust {- just computed -} $ lookupModuleEnv ba_env bi_tick_mod + let ba = expectJust {- just computed -} $ lookupModuleEnv ba_env ibi_info_mod return ( ld_st' , ba ) - back :: GhcMonad m => Int -> m ([Name], Int, SrcSpan) back n = moveHist (+n) @@ -517,8 +519,9 @@ moveHist fn = do span <- case mb_info of Nothing -> return $ mkGeneralSrcSpan (fsLit "<unknown>") Just ibi -> liftIO $ do - brks <- readModBreaks (hsc_HUG hsc_env) (ibi_tick_mod ibi) - return $ getBreakLoc ibi brks + let hug = hsc_HUG hsc_env + brks <- readIModBreaks hug ibi + getBreakLoc (readIModModBreaks hug) ibi brks (hsc_env1, names) <- liftIO $ bindLocalsAtBreakpoint hsc_env apStack span mb_info let ic = hsc_IC hsc_env1 @@ -579,11 +582,10 @@ bindLocalsAtBreakpoint hsc_env apStack span Nothing = do -- of the breakpoint and the free variables of the expression. bindLocalsAtBreakpoint hsc_env apStack_fhv span (Just ibi) = do let hug = hsc_HUG hsc_env - info_brks <- readModBreaks hug (ibi_info_mod ibi) - tick_brks <- readModBreaks hug (ibi_tick_mod ibi) - let info = getInternalBreak ibi (info_brks) + info_brks <- readIModBreaks hug ibi + let info = getInternalBreak ibi info_brks interp = hscInterp hsc_env - occs = getBreakVars ibi tick_brks + occs <- getBreakVars (readIModModBreaks hug) ibi info_brks -- Rehydrate to understand the breakpoint info relative to the current environment. -- This design is critical to preventing leaks (#22530) ===================================== compiler/GHC/Runtime/Interpreter.hs ===================================== @@ -27,7 +27,9 @@ module GHC.Runtime.Interpreter , getClosure , whereFrom , getModBreaks - , readModBreaks + , readIModBreaks + , readIModBreaksMaybe + , readIModModBreaks , seqHValue , evalBreakpointToId @@ -92,7 +94,6 @@ import GHC.Utils.Fingerprint import GHC.Unit.Module import GHC.Unit.Home.ModInfo -import GHC.Unit.Home.Graph (lookupHugByModule) import GHC.Unit.Env #if defined(HAVE_INTERNAL_INTERPRETER) @@ -411,15 +412,10 @@ evalBreakpointToId :: EvalBreakpoint -> InternalBreakpointId evalBreakpointToId eval_break = let mkUnitId u = fsToUnit $ mkFastStringShortByteString u - toModule u n = mkModule (mkUnitId u) (mkModuleName n) - tickl = toModule (eb_tick_mod_unit eval_break) (eb_tick_mod eval_break) - infol = toModule (eb_info_mod_unit eval_break) (eb_info_mod eval_break) in InternalBreakpointId - { ibi_tick_mod = tickl - , ibi_tick_index = eb_tick_index eval_break - , ibi_info_mod = infol + { ibi_info_mod = toModule (eb_info_mod_unit eval_break) (eb_info_mod eval_break) , ibi_info_index = eb_info_index eval_break } @@ -440,17 +436,18 @@ handleSeqHValueStatus interp unit_env eval_status = -- Reason: Setting of flags in libraries/ghci/GHCi/Run.hs:evalOptsSeq Just break -> do - let bi = evalBreakpointToId break + let ibi = evalBreakpointToId break + hug = ue_home_unit_graph unit_env -- Just case: Stopped at a breakpoint, extract SrcSpan information -- from the breakpoint. - mb_modbreaks <- getModBreaks . expectJust <$> - lookupHugByModule (ibi_tick_mod bi) (ue_home_unit_graph unit_env) + mb_modbreaks <- readIModBreaksMaybe hug (ibi_info_mod ibi) case mb_modbreaks of -- Nothing case - should not occur! We should have the appropriate -- breakpoint information Nothing -> nothing_case - Just modbreaks -> put $ brackets . ppr $ getBreakLoc bi modbreaks + Just modbreaks -> put . brackets . ppr =<< + getBreakLoc (readIModModBreaks hug) ibi modbreaks -- resume the seq (:force) processing in the iserv process withForeignRef resume_ctxt_fhv $ \hval -> do @@ -745,10 +742,18 @@ getModBreaks hmi | otherwise = Nothing -- probably object code --- | Read the 'InternalModBreaks' and 'ModBreaks' of the given home 'Module' --- from the 'HomeUnitGraph'. -readModBreaks :: HomeUnitGraph -> Module -> IO InternalModBreaks -readModBreaks hug modl = expectJust . getModBreaks . expectJust <$> HUG.lookupHugByModule modl hug +-- | Read the 'InternalModBreaks' of the given home 'Module' (via +-- 'InternalBreakpointId') from the 'HomeUnitGraph'. +readIModBreaks :: HomeUnitGraph -> InternalBreakpointId -> IO InternalModBreaks +readIModBreaks hug ibi = expectJust <$> readIModBreaksMaybe hug (ibi_info_mod ibi) + +-- | Read the 'InternalModBreaks' of the given home 'Module' from the 'HomeUnitGraph'. +readIModBreaksMaybe :: HomeUnitGraph -> Module -> IO (Maybe InternalModBreaks) +readIModBreaksMaybe hug mod = getModBreaks . expectJust <$> HUG.lookupHugByModule mod hug + +-- | Read the 'ModBreaks' from the given module's 'InternalModBreaks' +readIModModBreaks :: HUG.HomeUnitGraph -> Module -> IO ModBreaks +readIModModBreaks hug mod = imodBreaks_modBreaks . expectJust <$> readIModBreaksMaybe hug mod -- ----------------------------------------------------------------------------- -- Misc utils ===================================== compiler/GHC/StgToByteCode.hs ===================================== @@ -31,7 +31,6 @@ import GHC.Cmm.Utils import GHC.Platform import GHC.Platform.Profile -import GHC.Runtime.Interpreter import GHCi.FFI import GHC.Types.Basic import GHC.Utils.Outputable @@ -64,6 +63,7 @@ import GHC.StgToCmm.Closure ( NonVoid(..), fromNonVoid, idPrimRepU, assertNonVoidIds, assertNonVoidStgArgs ) import GHC.StgToCmm.Layout import GHC.Runtime.Heap.Layout hiding (WordOff, ByteOff, wordsToBytes) +import GHC.Runtime.Interpreter ( interpreterProfiled ) import GHC.Data.Bitmap import GHC.Data.FlatBag as FlatBag import GHC.Data.OrdList @@ -79,7 +79,6 @@ import Control.Monad import Data.Char import GHC.Unit.Module -import qualified GHC.Unit.Home.Graph as HUG import Data.Coerce (coerce) #if MIN_VERSION_rts(1,0,3) @@ -394,65 +393,28 @@ schemeR_wrk fvs nm original_body (args, body) -- | Introduce break instructions for ticked expressions. -- If no breakpoint information is available, the instruction is omitted. schemeER_wrk :: StackDepth -> BCEnv -> CgStgExpr -> BcM BCInstrList -schemeER_wrk d p (StgTick (Breakpoint tick_ty (BreakpointId tick_mod tick_no) fvs) rhs) = do +schemeER_wrk d p (StgTick (Breakpoint tick_ty tick_id fvs) rhs) = do code <- schemeE d 0 p rhs - hsc_env <- getHscEnv - current_mod <- getCurrentModule mb_current_mod_breaks <- getCurrentModBreaks case mb_current_mod_breaks of -- if we're not generating ModBreaks for this module for some reason, we -- can't store breakpoint occurrence information. Nothing -> pure code - Just current_mod_breaks -> break_info hsc_env tick_mod current_mod mb_current_mod_breaks >>= \case - Nothing -> pure code - Just ModBreaks{modBreaks_module = tick_mod} -> do - platform <- profilePlatform <$> getProfile - let idOffSets = getVarOffSets platform d p fvs - ty_vars = tyCoVarsOfTypesWellScoped (tick_ty:map idType fvs) - toWord :: Maybe (Id, WordOff) -> Maybe (Id, Word) - toWord = fmap (\(i, wo) -> (i, fromIntegral wo)) - breakInfo = dehydrateCgBreakInfo ty_vars (map toWord idOffSets) tick_ty + Just current_mod_breaks -> do + platform <- profilePlatform <$> getProfile + let idOffSets = getVarOffSets platform d p fvs + ty_vars = tyCoVarsOfTypesWellScoped (tick_ty:map idType fvs) + toWord :: Maybe (Id, WordOff) -> Maybe (Id, Word) + toWord = fmap (\(i, wo) -> (i, fromIntegral wo)) + breakInfo = dehydrateCgBreakInfo ty_vars (map toWord idOffSets) tick_ty tick_id - let info_mod = modBreaks_module current_mod_breaks - infox <- newBreakInfo breakInfo + let info_mod = modBreaks_module current_mod_breaks + infox <- newBreakInfo breakInfo - let breakInstr = BRK_FUN (InternalBreakpointId tick_mod tick_no info_mod infox) - return $ breakInstr `consOL` code + let breakInstr = BRK_FUN (InternalBreakpointId info_mod infox) + return $ breakInstr `consOL` code schemeER_wrk d p rhs = schemeE d 0 p rhs --- | Determine the GHCi-allocated 'BreakArray' and module pointer for the module --- from which the breakpoint originates. --- These are stored in 'ModBreaks' as remote pointers in order to allow the BCOs --- to refer to pointers in GHCi's address space. --- They are initialized in 'GHC.HsToCore.Breakpoints.mkModBreaks', called by --- 'GHC.HsToCore.deSugar'. --- --- Breakpoints might be disabled because we're in TH, because --- @-fno-break-points@ was specified, or because a module was reloaded without --- reinitializing 'ModBreaks'. --- --- If the module stored in the breakpoint is the currently processed module, use --- the 'ModBreaks' from the state. --- If that is 'Nothing', consider breakpoints to be disabled and skip the --- instruction. --- --- If the breakpoint is inlined from another module, look it up in the HUG (home unit graph). --- If the module doesn't exist there, or if the 'ModBreaks' value is --- uninitialized, skip the instruction (i.e. return Nothing). -break_info :: - HscEnv -> - Module -> - Module -> - Maybe ModBreaks -> - BcM (Maybe ModBreaks) -break_info hsc_env mod current_mod current_mod_breaks - | mod == current_mod - = pure current_mod_breaks - | otherwise - = liftIO (HUG.lookupHugByModule mod (hsc_HUG hsc_env)) >>= \case - Just hp -> pure $ imodBreaks_modBreaks <$> getModBreaks hp - Nothing -> pure Nothing - getVarOffSets :: Platform -> StackDepth -> BCEnv -> [Id] -> [Maybe (Id, WordOff)] getVarOffSets platform depth env = map getOffSet where ===================================== compiler/GHC/SysTools/Tasks.hs ===================================== @@ -55,7 +55,7 @@ import GHC.Driver.Config.Diagnostic import GHC.Driver.Errors import GHC.Driver.Errors.Types (GhcMessage(..), DriverMessage (DriverNoConfiguredLLVMToolchain)) import GHC.Driver.CmdLine (warnsToMessages) -import GHC.Types.SrcLoc (noLoc) +import GHC.Types.SrcLoc (noLoc, noSrcSpan) {- ************************************************************************ @@ -346,7 +346,7 @@ figureLlvmVersion logger dflags = traceSystoolCommand logger "llc" $ do debugTraceMsg logger 2 (text "Error (figuring out LLVM version):" <+> text (show err)) - errorMsg logger $ vcat + reportError logger neverQualify emptyDiagOpts noSrcSpan $ vcat [ text "Warning:", nest 9 $ text "Couldn't figure out LLVM version!" $$ text ("Make sure you have installed LLVM between [" ===================================== compiler/GHC/Utils/Error.hs ===================================== @@ -32,7 +32,7 @@ module GHC.Utils.Error ( emptyMessages, mkDecorated, mkLocMessage, mkMsgEnvelope, mkPlainMsgEnvelope, mkPlainErrorMsgEnvelope, mkErrorMsgEnvelope, - mkMCDiagnostic, errorDiagnostic, diagReasonSeverity, + mkMCDiagnostic, diagReasonSeverity, mkPlainError, mkPlainDiagnostic, @@ -46,7 +46,6 @@ module GHC.Utils.Error ( -- * Issuing messages during compilation putMsg, printInfoForUser, printOutputForUser, logInfo, logOutput, - errorMsg, fatalErrorMsg, compilationProgressMsg, showPass, @@ -168,11 +167,6 @@ mkMCDiagnostic opts reason code = MCDiagnostic sev reason' code where (sev, reason') = diag_reason_severity opts reason --- | Varation of 'mkMCDiagnostic' which can be used when we are /sure/ the --- input 'DiagnosticReason' /is/ 'ErrorWithoutFlag' and there is no diagnostic code. -errorDiagnostic :: MessageClass -errorDiagnostic = MCDiagnostic SevError (ResolvedDiagnosticReason ErrorWithoutFlag) Nothing - -- -- Creating MsgEnvelope(s) -- @@ -318,17 +312,12 @@ sortMsgBag mopts = maybeLimit . sortBy (cmp `on` errMsgSpan) . bagToList ghcExit :: Logger -> Int -> IO () ghcExit logger val | val == 0 = exitWith ExitSuccess - | otherwise = do errorMsg logger (text "\nCompilation had errors\n\n") + | otherwise = do fatalErrorMsg logger (text "\nCompilation had errors\n\n") exitWith (ExitFailure val) -- ----------------------------------------------------------------------------- -- Outputting messages from the compiler -errorMsg :: Logger -> SDoc -> IO () -errorMsg logger msg - = logMsg logger errorDiagnostic noSrcSpan $ - withPprStyle defaultErrStyle msg - fatalErrorMsg :: Logger -> SDoc -> IO () fatalErrorMsg logger msg = logMsg logger MCFatal noSrcSpan $ withPprStyle defaultErrStyle msg ===================================== ghc/GHCi/UI.hs ===================================== @@ -45,7 +45,7 @@ import GHC.Runtime.Eval (mkTopLevEnv) import GHC.Runtime.Eval.Utils -- The GHC interface -import GHC.ByteCode.Breakpoints (imodBreaks_modBreaks) +import GHC.ByteCode.Breakpoints (imodBreaks_modBreaks, InternalBreakpointId(..), getBreakSourceId) import GHC.Runtime.Interpreter import GHCi.RemoteTypes import GHCi.BreakArray( breakOn, breakOff ) @@ -68,7 +68,7 @@ import GHC ( LoadHowMuch(..), Target(..), TargetId(..), Resume, SingleStep, Ghc, GetDocsFailure(..), pushLogHookM, getModuleGraph, handleSourceError, - InternalBreakpointId(..) ) + BreakpointId(..) ) import GHC.Driver.Main (hscParseModuleWithLocation, hscParseStmtWithLocation) import GHC.Hs.ImpExp import GHC.Hs @@ -546,6 +546,7 @@ interactiveUI config srcs maybe_exprs = do break_ctr = 0, breaks = IntMap.empty, tickarrays = emptyModuleEnv, + internalBreaks = emptyModuleEnv, ghci_commands = availableCommands config, ghci_macros = [], last_command = Nothing, @@ -1616,13 +1617,15 @@ toBreakIdAndLocation :: GhciMonad m toBreakIdAndLocation Nothing = return Nothing toBreakIdAndLocation (Just inf) = do st <- getGHCiState + hug <- hsc_HUG <$> GHC.getSession + brks <- liftIO $ readIModBreaks hug inf + let bi = getBreakSourceId inf brks return $ listToMaybe [ id_loc | id_loc@(_,loc) <- IntMap.assocs (breaks st), - breakModule loc == ibi_tick_mod inf, - breakTick loc == ibi_tick_index inf ] + breakId loc == bi ] printStoppedAtBreakInfo :: GHC.GhcMonad m => Resume -> [Name] -> m () printStoppedAtBreakInfo res names = do - printForUser $ pprStopped res + printForUser =<< pprStopped res -- printTypeOfNames session names let namesSorted = sortBy compareNames names tythings <- catMaybes `liftM` mapM GHC.lookupName namesSorted @@ -3804,22 +3807,32 @@ showBkptTable = do showContext :: GHC.GhcMonad m => m () showContext = do resumes <- GHC.getResumeContext - printForUser $ vcat (map pp_resume (reverse resumes)) + docs <- mapM pp_resume (reverse resumes) + printForUser $ vcat docs where - pp_resume res = - text "--> " <> text (GHC.resumeStmt res) - $$ nest 2 (pprStopped res) - -pprStopped :: GHC.Resume -> SDoc -pprStopped res = - text "Stopped in" - <+> ((case mb_mod_name of - Nothing -> empty - Just mod_name -> ftext (moduleNameFS mod_name) <> char '.') - <> text (GHC.resumeDecl res)) - <> char ',' <+> ppr (GHC.resumeSpan res) - where - mb_mod_name = moduleName <$> ibi_tick_mod <$> GHC.resumeBreakpointId res + pp_resume res = do + stopped <- pprStopped res + return $ + text "--> " <> text (GHC.resumeStmt res) + $$ nest 2 stopped + +pprStopped :: GHC.GhcMonad m => GHC.Resume -> m SDoc +pprStopped res = do + let mibi = GHC.resumeBreakpointId res + mb_mod_name <- case mibi of + Nothing -> pure Nothing + Just ibi -> do + hug <- hsc_HUG <$> GHC.getSession + brks <- liftIO $ readIModBreaks hug ibi + return $ Just $ moduleName $ + bi_tick_mod $ getBreakSourceId ibi brks + return $ + text "Stopped in" + <+> ((case mb_mod_name of + Nothing -> empty + Just mod_name -> ftext (moduleNameFS mod_name) <> char '.') + <> text (GHC.resumeDecl res)) + <> char ',' <+> ppr (GHC.resumeSpan res) showUnits :: GHC.GhcMonad m => m () showUnits = mapNonInteractiveHomeUnitsM $ \dflags -> do @@ -4373,12 +4386,8 @@ ignoreCmd argLine = withSandboxOnly ":ignore" $ do result <- ignoreSwitch (words argLine) case result of Left sdoc -> printForUser sdoc - Right (loc, count) -> do - let bi = GHC.BreakpointId - { bi_tick_mod = breakModule loc - , bi_tick_index = breakTick loc - } - setupBreakpoint bi count + Right (loc, count) -> do + setupBreakpoint (breakId loc) count ignoreSwitch :: GhciMonad m => [String] -> m (Either SDoc (BreakLocation, Int)) ignoreSwitch [break, count] = do @@ -4395,10 +4404,13 @@ getIgnoreCount str = where sdocIgnore = text "Ignore count" <+> quotes (text str) -setupBreakpoint :: GhciMonad m => GHC.BreakpointId -> Int -> m() -setupBreakpoint loc count = do +setupBreakpoint :: GhciMonad m => GHC.BreakpointId -> Int -> m () +setupBreakpoint bi count = do hsc_env <- GHC.getSession - GHC.setupBreakpoint (hscInterp hsc_env) loc count + -- Trigger all internal breaks that match this source break id + internal_break_ids <- getInternalBreaksOf bi + forM_ internal_break_ids $ \ibi -> do + GHC.setupBreakpoint (hscInterp hsc_env) ibi count backCmd :: GhciMonad m => String -> m () backCmd arg @@ -4489,20 +4501,20 @@ findBreakAndSet md lookupTickTree = do some -> mapM_ breakAt some where breakAt (tick, pan) = do - setBreakFlag md tick True - (alreadySet, nm) <- - recordBreak $ BreakLocation - { breakModule = md - , breakLoc = RealSrcSpan pan Strict.Nothing - , breakTick = tick - , onBreakCmd = "" - , breakEnabled = True - } - printForUser $ - text "Breakpoint " <> ppr nm <> - if alreadySet - then text " was already set at " <> ppr pan - else text " activated at " <> ppr pan + let bi = BreakpointId md tick + setBreakFlag bi True + (alreadySet, nm) <- + recordBreak $ BreakLocation + { breakLoc = RealSrcSpan pan Strict.Nothing + , breakId = bi + , onBreakCmd = "" + , breakEnabled = True + } + printForUser $ + text "Breakpoint " <> ppr nm <> + if alreadySet + then text " was already set at " <> ppr pan + else text " activated at " <> ppr pan -- For now, use ANSI bold on terminals that we know support it. -- Otherwise, we add a line of carets under the active expression instead. @@ -4749,14 +4761,32 @@ turnBreakOnOff :: GhciMonad m => Bool -> BreakLocation -> m BreakLocation turnBreakOnOff onOff loc | onOff == breakEnabled loc = return loc | otherwise = do - setBreakFlag (breakModule loc) (breakTick loc) onOff + setBreakFlag (breakId loc) onOff return loc { breakEnabled = onOff } -setBreakFlag :: GhciMonad m => Module -> Int -> Bool ->m () -setBreakFlag md ix enaDisa = do +setBreakFlag :: GhciMonad m => GHC.BreakpointId -> Bool -> m () +setBreakFlag (BreakpointId md ix) enaDisa = do let enaDisaToCount True = breakOn enaDisaToCount False = breakOff - setupBreakpoint (GHC.BreakpointId md ix) $ enaDisaToCount enaDisa + setupBreakpoint (BreakpointId md ix) $ enaDisaToCount enaDisa + +-- -------------------------------------------------------------------------- +-- Find matching Internal Breakpoints + +-- | Find all the internal breakpoints that use the given source-level breakpoint id +getInternalBreaksOf :: GhciMonad m => BreakpointId -> m [InternalBreakpointId] +getInternalBreaksOf bi = do + st <- getGHCiState + let ibrks = internalBreaks st + case lookupBreakpointOccurrences ibrks bi of + Just bs -> return bs + Nothing -> do + -- Refresh the internal breakpoints map + bs <- mkBreakpointOccurrences + setGHCiState st{internalBreaks = bs} + return $ + fromMaybe [] {- still not found after refresh -} $ + lookupBreakpointOccurrences bs bi -- --------------------------------------------------------------------------- -- User code exception handling ===================================== ghc/GHCi/UI/Monad.hs ===================================== @@ -100,6 +100,14 @@ data GHCiState = GHCiState -- ^ 'tickarrays' caches the 'TickArray' for loaded modules, -- so that we don't rebuild it each time the user sets -- a breakpoint. + + internalBreaks :: BreakpointOccurrences, + -- ^ Keep a mapping from the source-level 'BreakpointId' to the + -- occurrences of that breakpoint across modules. + -- When we want to stop at a source 'BreakpointId', we essentially + -- trigger a breakpoint for all 'InternalBreakpointId's matching + -- the same source-id. + ghci_commands :: [Command], -- ^ available ghci commands ghci_macros :: [Command], @@ -238,16 +246,15 @@ data LocalConfigBehaviour data BreakLocation = BreakLocation - { breakModule :: !GHC.Module - , breakLoc :: !SrcSpan - , breakTick :: {-# UNPACK #-} !Int + { breakLoc :: !SrcSpan + , breakId :: !GHC.BreakpointId + -- ^ The 'BreakpointId' uniquely identifies a source-level breakpoint , breakEnabled:: !Bool , onBreakCmd :: String } instance Eq BreakLocation where - loc1 == loc2 = breakModule loc1 == breakModule loc2 && - breakTick loc1 == breakTick loc2 + loc1 == loc2 = breakId loc1 == breakId loc2 prettyLocations :: IntMap.IntMap BreakLocation -> SDoc prettyLocations locs = @@ -256,7 +263,7 @@ prettyLocations locs = False -> vcat $ map (\(i, loc) -> brackets (int i) <+> ppr loc) $ IntMap.toAscList locs instance Outputable BreakLocation where - ppr loc = (ppr $ breakModule loc) <+> ppr (breakLoc loc) <+> pprEnaDisa <+> + ppr loc = (ppr $ GHC.bi_tick_mod $ breakId loc) <+> ppr (breakLoc loc) <+> pprEnaDisa <+> if null (onBreakCmd loc) then empty else doubleQuotes (text (onBreakCmd loc)) ===================================== libraries/ghci/GHCi/Debugger.hs ===================================== @@ -65,10 +65,7 @@ foreign import ccall "&rts_stop_on_exception" exceptionFlag :: Ptr CInt -------------------------------------------------------------------------------- type BreakpointCallback - = Addr# -- pointer to the breakpoint tick module name - -> Addr# -- pointer to the breakpoint tick module unit id - -> Int# -- breakpoint tick index - -> Addr# -- pointer to the breakpoint info module name + = Addr# -- pointer to the breakpoint info module name -> Addr# -- pointer to the breakpoint info module unit id -> Int# -- breakpoint info index -> Bool -- exception? ===================================== libraries/ghci/GHCi/Message.hs ===================================== @@ -418,10 +418,7 @@ data EvalStatus_ a b instance Binary a => Binary (EvalStatus_ a b) data EvalBreakpoint = EvalBreakpoint - { eb_tick_mod :: String -- ^ Breakpoint tick module - , eb_tick_mod_unit :: BS.ShortByteString -- ^ Breakpoint tick module unit id - , eb_tick_index :: Int -- ^ Breakpoint tick index - , eb_info_mod :: String -- ^ Breakpoint info module + { eb_info_mod :: String -- ^ Breakpoint info module , eb_info_mod_unit :: BS.ShortByteString -- ^ Breakpoint tick module unit id , eb_info_index :: Int -- ^ Breakpoint info index } ===================================== libraries/ghci/GHCi/Run.hs ===================================== @@ -345,7 +345,7 @@ withBreakAction opts breakMVar statusMVar mtid act -- as soon as it is hit, or in resetBreakAction below. onBreak :: BreakpointCallback - onBreak tick_mod# tick_mod_uid# tickx# info_mod# info_mod_uid# infox# is_exception apStack = do + onBreak info_mod# info_mod_uid# infox# is_exception apStack = do tid <- myThreadId let resume = ResumeContext { resumeBreakMVar = breakMVar @@ -358,11 +358,9 @@ withBreakAction opts breakMVar statusMVar mtid act if is_exception then pure Nothing else do - tick_mod <- peekCString (Ptr tick_mod#) - tick_mod_uid <- BS.packCString (Ptr tick_mod_uid#) info_mod <- peekCString (Ptr info_mod#) info_mod_uid <- BS.packCString (Ptr info_mod_uid#) - pure (Just (EvalBreakpoint tick_mod tick_mod_uid (I# tickx#) info_mod info_mod_uid (I# infox#))) + pure (Just (EvalBreakpoint info_mod info_mod_uid (I# infox#))) putMVar statusMVar $ EvalBreak apStack_r breakpoint resume_r ccs takeMVar breakMVar @@ -409,8 +407,8 @@ noBreakStablePtr :: StablePtr BreakpointCallback noBreakStablePtr = unsafePerformIO $ newStablePtr noBreakAction noBreakAction :: BreakpointCallback -noBreakAction _ _ _ _ _ _ False _ = putStrLn "*** Ignoring breakpoint" -noBreakAction _ _ _ _ _ _ True _ = return () -- exception: just continue +noBreakAction _ _ _ False _ = putStrLn "*** Ignoring breakpoint" +noBreakAction _ _ _ True _ = return () -- exception: just continue -- Malloc and copy the bytes. We don't have any way to monitor the -- lifetime of this memory, so it just leaks. ===================================== rts/Disassembler.c ===================================== @@ -84,16 +84,23 @@ disInstr ( StgBCO *bco, int pc ) switch (instr & 0xff) { - case bci_BRK_FUN: - debugBelch ("BRK_FUN " ); printPtr( ptrs[instrs[pc]] ); - debugBelch (" %d ", instrs[pc+1]); printPtr( ptrs[instrs[pc+2]] ); - CostCentre* cc = (CostCentre*)literals[instrs[pc+5]]; + case bci_BRK_FUN: { + W_ p1, info_mod, info_unit_id, info_wix, np; + p1 = BCO_GET_LARGE_ARG; + info_mod = BCO_GET_LARGE_ARG; + info_unit_id = BCO_GET_LARGE_ARG; + info_wix = BCO_NEXT; + np = BCO_GET_LARGE_ARG; + debugBelch ("BRK_FUN " ); printPtr( ptrs[p1] ); + debugBelch("%" FMT_Word, literals[info_mod] ); + debugBelch("%" FMT_Word, literals[info_unit_id] ); + debugBelch("%" FMT_Word, info_wix ); + CostCentre* cc = (CostCentre*)literals[np]; if (cc) { debugBelch(" %s", cc->label); } debugBelch("\n"); - pc += 6; - break; + break; } case bci_BRK_ALTS: debugBelch ("BRK_ALTS %d\n", BCO_NEXT); break; ===================================== rts/Exception.cmm ===================================== @@ -535,23 +535,17 @@ retry_pop_stack: // be per-thread. CInt[rts_stop_on_exception] = 0; ("ptr" ioAction) = ccall deRefStablePtr (W_[rts_breakpoint_io_action] "ptr"); - Sp = Sp - WDS(17); - Sp(16) = exception; - Sp(15) = stg_raise_ret_info; - Sp(14) = exception; - Sp(13) = ghczminternal_GHCziInternalziTypes_True_closure; // True <=> an exception - Sp(12) = stg_ap_ppv_info; - Sp(11) = 0; - Sp(10) = stg_ap_n_info; - Sp(9) = 0; - Sp(8) = stg_ap_n_info; - Sp(7) = 0; - Sp(6) = stg_ap_n_info; - Sp(5) = 0; - Sp(4) = stg_ap_n_info; - Sp(3) = 0; - Sp(2) = stg_ap_n_info; - Sp(1) = 0; + Sp = Sp - WDS(11); + Sp(10) = exception; + Sp(9) = stg_raise_ret_info; + Sp(8) = exception; + Sp(7) = ghczminternal_GHCziInternalziTypes_True_closure; // True <=> an exception + Sp(6) = stg_ap_ppv_info; + Sp(5) = 0; + Sp(4) = stg_ap_n_info; + Sp(3) = 0; + Sp(2) = stg_ap_n_info; + Sp(1) = 0; R1 = ioAction; jump RET_LBL(stg_ap_n) [R1]; } ===================================== rts/Interpreter.c ===================================== @@ -685,8 +685,6 @@ interpretBCO (Capability* cap) */ if (cap->r.rCurrentTSO->flags & TSO_STOP_AFTER_RETURN) { - StgBCO* bco; - StgWord16* bco_instrs; StgHalfWord type; /* Store the entry Sp; traverse the stack modifying Sp (using Sp macros); @@ -706,28 +704,33 @@ interpretBCO (Capability* cap) ASSERT(type == RET_BCO || type == STOP_FRAME); if (type == RET_BCO) { - bco = (StgBCO*)(SpW(1)); // BCO is first arg of a RET_BCO + StgBCO* bco = (StgBCO*)(SpW(1)); // BCO is first arg of a RET_BCO ASSERT(get_itbl((StgClosure*)bco)->type == BCO); - bco_instrs = (StgWord16*)(bco->instrs->payload); + + StgWord16* instrs = (StgWord16*)(bco->instrs->payload); + StgWord16 bci = instrs[0]; /* A breakpoint instruction (BRK_FUN or BRK_ALTS) is always the first * instruction in a BCO */ - if ((bco_instrs[0] & 0xFF) == bci_BRK_FUN) { - int brk_array, tick_index; - StgArrBytes *breakPoints; - StgPtr* ptrs; + if ((bci & 0xFF) == bci_BRK_FUN) { + // Define rest of variables used by BCO_* Macros + int bciPtr = 0; + + W_ arg1_brk_array, arg4_info_index; + arg1_brk_array = BCO_GET_LARGE_ARG; + /* info_mod_name = */ BCO_GET_LARGE_ARG; + /* info_mod_id = */ BCO_GET_LARGE_ARG; + arg4_info_index = BCO_NEXT; - ptrs = (StgPtr*)(&bco->ptrs->payload[0]); - brk_array = bco_instrs[1]; - tick_index = bco_instrs[6]; + StgPtr* ptrs = (StgPtr*)(&bco->ptrs->payload[0]); + StgArrBytes* breakPoints = (StgArrBytes *) BCO_PTR(arg1_brk_array); - breakPoints = (StgArrBytes *) BCO_PTR(brk_array); // ACTIVATE the breakpoint by tick index - ((StgInt*)breakPoints->payload)[tick_index] = 0; + ((StgInt*)breakPoints->payload)[arg4_info_index] = 0; } - else if ((bco_instrs[0] & 0xFF) == bci_BRK_ALTS) { + else if ((bci & 0xFF) == bci_BRK_ALTS) { // ACTIVATE BRK_ALTS by setting its only argument to ON - bco_instrs[1] = 1; + instrs[1] = 1; } // else: if there is no BRK instruction perhaps we should keep // traversing; that said, the continuation should always have a BRK @@ -1520,9 +1523,9 @@ run_BCO: /* check for a breakpoint on the beginning of a let binding */ case bci_BRK_FUN: { - int arg1_brk_array, arg2_tick_mod, arg3_info_mod, arg4_tick_mod_id, arg5_info_mod_id, arg6_tick_index, arg7_info_index; + W_ arg1_brk_array, arg2_info_mod_name, arg3_info_mod_id, arg4_info_index; #if defined(PROFILING) - int arg8_cc; + W_ arg5_cc; #endif StgArrBytes *breakPoints; int returning_from_break, stop_next_breakpoint; @@ -1537,14 +1540,11 @@ run_BCO: int size_words; arg1_brk_array = BCO_GET_LARGE_ARG; - arg2_tick_mod = BCO_GET_LARGE_ARG; - arg3_info_mod = BCO_GET_LARGE_ARG; - arg4_tick_mod_id = BCO_GET_LARGE_ARG; - arg5_info_mod_id = BCO_GET_LARGE_ARG; - arg6_tick_index = BCO_NEXT; - arg7_info_index = BCO_NEXT; + arg2_info_mod_name = BCO_GET_LARGE_ARG; + arg3_info_mod_id = BCO_GET_LARGE_ARG; + arg4_info_index = BCO_NEXT; #if defined(PROFILING) - arg8_cc = BCO_GET_LARGE_ARG; + arg5_cc = BCO_GET_LARGE_ARG; #else BCO_GET_LARGE_ARG; #endif @@ -1564,7 +1564,7 @@ run_BCO: #if defined(PROFILING) cap->r.rCCCS = pushCostCentre(cap->r.rCCCS, - (CostCentre*)BCO_LIT(arg8_cc)); + (CostCentre*)BCO_LIT(arg5_cc)); #endif // if we are returning from a break then skip this section @@ -1575,11 +1575,11 @@ run_BCO: // stop the current thread if either `stop_next_breakpoint` is // true OR if the ignore count for this particular breakpoint is zero - StgInt ignore_count = ((StgInt*)breakPoints->payload)[arg6_tick_index]; + StgInt ignore_count = ((StgInt*)breakPoints->payload)[arg4_info_index]; if (stop_next_breakpoint == false && ignore_count > 0) { // decrement and write back ignore count - ((StgInt*)breakPoints->payload)[arg6_tick_index] = --ignore_count; + ((StgInt*)breakPoints->payload)[arg4_info_index] = --ignore_count; } else if (stop_next_breakpoint == true || ignore_count == 0) { @@ -1613,10 +1613,7 @@ run_BCO: // Arrange the stack to call the breakpoint IO action, and // continue execution of this BCO when the IO action returns. // - // ioAction :: Addr# -- the breakpoint tick module - // -> Addr# -- the breakpoint tick module unit id - // -> Int# -- the breakpoint tick index - // -> Addr# -- the breakpoint info module + // ioAction :: Addr# -- the breakpoint info module // -> Addr# -- the breakpoint info module unit id // -> Int# -- the breakpoint info index // -> Bool -- exception? @@ -1626,23 +1623,17 @@ run_BCO: ioAction = (StgClosure *) deRefStablePtr ( rts_breakpoint_io_action); - Sp_subW(19); - SpW(18) = (W_)obj; - SpW(17) = (W_)&stg_apply_interp_info; - SpW(16) = (W_)new_aps; - SpW(15) = (W_)False_closure; // True <=> an exception - SpW(14) = (W_)&stg_ap_ppv_info; - SpW(13) = (W_)arg7_info_index; - SpW(12) = (W_)&stg_ap_n_info; - SpW(11) = (W_)BCO_LIT(arg5_info_mod_id); - SpW(10) = (W_)&stg_ap_n_info; - SpW(9) = (W_)BCO_LIT(arg3_info_mod); - SpW(8) = (W_)&stg_ap_n_info; - SpW(7) = (W_)arg6_tick_index; + Sp_subW(13); + SpW(12) = (W_)obj; + SpW(11) = (W_)&stg_apply_interp_info; + SpW(10) = (W_)new_aps; + SpW(9) = (W_)False_closure; // True <=> an exception + SpW(8) = (W_)&stg_ap_ppv_info; + SpW(7) = (W_)arg4_info_index; SpW(6) = (W_)&stg_ap_n_info; - SpW(5) = (W_)BCO_LIT(arg4_tick_mod_id); + SpW(5) = (W_)BCO_LIT(arg3_info_mod_id); SpW(4) = (W_)&stg_ap_n_info; - SpW(3) = (W_)BCO_LIT(arg2_tick_mod); + SpW(3) = (W_)BCO_LIT(arg2_info_mod_name); SpW(2) = (W_)&stg_ap_n_info; SpW(1) = (W_)ioAction; SpW(0) = (W_)&stg_enter_info; ===================================== testsuite/tests/corelint/T21115b.stderr ===================================== @@ -30,6 +30,6 @@ end Rec } *** End of Offense *** - -<no location info>: error: Compilation had errors + + View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/2ff38e31949ed57c1c1f0af3461f785... -- View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/2ff38e31949ed57c1c1f0af3461f785... You're receiving this email because of your account on gitlab.haskell.org.