Simon Peyton Jones pushed to branch wip/andreask/spec_tyfams at Glasgow Haskell Compiler / GHC Commits: 8d33d048 by Berk Özkütük at 2025-07-07T20:42:20-04:00 Consider `PromotedDataCon` in `tyConStupidTheta` Haddock checks data declarations for the stupid theta so as not to pretty-print them as empty contexts. Type data declarations end up as `PromotedDataCon`s by the time Haddock performs this check, causing a panic. This commit extends `tyConStupidTheta` so that it returns an empty list for `PromotedDataCon`s. This decision was guided by the fact that type data declarations never have data type contexts (see (R1) in Note [Type data declarations]). Fixes #25739. - - - - - a26243fd by Ryan Hendrickson at 2025-07-07T20:43:07-04:00 haddock: Document instances from other packages When attaching instances to `Interface`s, it isn't enough just to look for instances in the list of `Interface`s being processed. We also need to look in the modules on which they depend, including those outside of this package. Fixes #25147. Fixes #26079. - - - - - 0fb24420 by Rodrigo Mesquita at 2025-07-07T20:43:49-04:00 hadrian: Fallback logic for internal interpreter When determining whether to build the internal interpreter, the `make` build system had a fallback case for platforms not in the list of explicitly-supported operating systems and architectures. This fallback says we should try to build the internal interpreter if building dynamic GHC programs (if the architecture is unknown). Fixes #24098 - - - - - fe925bd4 by Ben Gamari at 2025-07-07T20:44:30-04:00 users-guide: Reference Wasm FFI section - - - - - 5856284b by Ben Gamari at 2025-07-07T20:44:30-04:00 users-guide: Fix too-short heading warning - - - - - a48dcdf3 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Reorganise documentation for allocate* functions Consolodate interface information into the .h file, keeping just implementation details in the .c file. Use Notes stlye in the .h file and refer to notes from the .c file. - - - - - de5b528c by Duncan Coutts at 2025-07-07T20:45:18-04:00 Introduce common utilities for allocating arrays The intention is to share code among the several places that do this already. - - - - - b321319d by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in Heap.c The CMM primop can now report heap overflow. - - - - - 1d557ffb by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in ThreadLabels.c Replacing a local utility. - - - - - e59a1430 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in Threads.c Replacing local open coded version. - - - - - 482df1c9 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Add exitHeapOverflow helper utility This will be useful with the array alloc functions, since unlike allocate/allocateMaybeFail, they do not come in two versions. So if it's not convenient to propagate failure, then one can use this. - - - - - 4d3ec8f9 by Duncan Coutts at 2025-07-07T20:45:18-04:00 Use new array alloc utils in Weak.c Also add a cpp macro CCS_SYSTEM_OR_NULL which does what it says. The benefit of this is that it allows us to referece CCS_SYSTEM even when we're not in PROFILING mode. That makes abstracting over profiling vs normal mode a lot easier. - - - - - 0c4f2fde by Duncan Coutts at 2025-07-07T20:45:18-04:00 Convert the array alloc primops to use the new array alloc utils - - - - - a3354ad9 by Duncan Coutts at 2025-07-07T20:45:18-04:00 While we're at it, add one missing 'likely' hint To a cmm primops that raises an exception, like the others now do. - - - - - 33b546bd by meooow25 at 2025-07-07T20:46:09-04:00 Keep scanl' strict in the head on rewrite `scanl'` forces elements to WHNF when the corresponding `(:)`s are forced. The rewrite rule for `scanl'` missed forcing the first element, which is fixed here with a `seq`. - - - - - 8a69196e by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 debugger/rts: Allow toggling step-in per thread The RTS global flag `rts_stop_next_breakpoint` globally sets the interpreter to stop at the immediate next breakpoint. With this commit, single step mode can additionally be set per thread in the TSO flag (TSO_STOP_NEXT_BREAKPOINT). Being able to toggle "stop at next breakpoint" per thread is an important requirement for implementing "stepping out" of a function in a multi-threaded context. And, more generally, having a per-thread flag for single-stepping paves the way for multi-threaded debugging. That said, when we want to enable "single step" mode for the whole interpreted program we still want to stop at the immediate next breakpoint, whichever thread it belongs to. That's why we also keep the global `rts_stop_next_breakpoint` flag, with `rts_enableStopNextBreakpointAll` and `rts_disableStopNextBreakpointAll` helpers. Preparation for #26042 - - - - - 73d3f864 by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 docs: Case continuation BCOs This commit documents a subtle interaction between frames for case BCOs and their parents frames. Namely, case continuation BCOs may refer to (non-local) variables that are part of the parent's frame. The note expanding a bit on these details is called [Case continuation BCOs] - - - - - d7aeddcf by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 debugger: Implement step-out feature Implements support for stepping-out of a function (aka breaking right after returning from a function) in the interactive debugger. It also introduces a GHCi command :stepout to step-out of a function being debugged in the interpreter. The feature is described as: Stop at the first breakpoint immediately after returning from the current function scope. Known limitations: because a function tail-call does not push a stack frame, if step-out is used inside of a function that was tail-called, execution will not be returned to its caller, but rather its caller's first non-tail caller. On the other hand, it means the debugger follows the more realistic execution of the program. In the following example: .. code-block:: none f = do a b <--- (1) set breakpoint then step in here c b = do ... d <--- (2) step-into this tail call d = do ... something <--- (3) step-out here ... Stepping-out will stop execution at the `c` invokation in `f`, rather than stopping at `b`. The key idea is simple: When step-out is enabled, traverse the runtime stack until a continuation BCO is found -- and enable the breakpoint heading that BCO explicitly using its tick-index. The details are specified in `Note [Debugger: Step-out]` in `rts/Interpreter.c`. Since PUSH_ALTS BCOs (representing case continuations) were never headed by a breakpoint (unlike the case alternatives they push), we introduced the BRK_ALTS instruction to allow the debugger to set a case continuation to stop at the breakpoint heading the alternative that is taken. This is further described in `Note [Debugger: BRK_ALTS]`. Fixes #26042 - - - - - 5d9adf51 by Rodrigo Mesquita at 2025-07-08T07:39:47-04:00 debugger: Filter step-out stops by SrcSpan To implement step-out, the RTS looks for the first continuation frame on the stack and explicitly enables its entry breakpoint. However, some continuations will be contained in the function from which step-out was initiated (trivial example is a case expression). Similarly to steplocal, we will filter the breakpoints at which the RTS yields to the debugger based on the SrcSpan. When doing step-out, only stop if the breakpoint is /not/ contained in the function from which we initiated it. This is especially relevant in monadic statements such as IO which is compiled to a long chain of case expressions. See Note [Debugger: Filtering step-out stops] - - - - - 7677adcc by Cheng Shao at 2025-07-08T07:40:29-04:00 compiler: make ModBreaks serializable - - - - - 14f67c6d by Rodrigo Mesquita at 2025-07-08T07:40:29-04:00 refactor: "Inspecting the session" moved from GHC Moved utilities for inspecting the session from the GHC module to GHC.Driver.Session.Inspect Purely a clean up - - - - - 9d3f484a by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Pass the HUG to readModBreaks, not HscEnv A minor cleanup. The associated history and setupBreakpoint functions are changed accordingly. - - - - - b595f713 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Move readModBreaks to GHC.Runtime.Interpreter With some small docs changes - - - - - d223227a by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Move interpreterProfiled to Interp.Types Moves interpreterProfiled and interpreterDynamic to GHC.Runtime.Interpreter.Types from GHC.Runtime.Interpreter. - - - - - 7fdd0a3d by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Don't import GHC in Debugger.Breakpoints Remove the top-level import GHC from GHC.Runtime.Debugger.Breakpoints This makes the module dependencies more granular and cleans up the qualified imports from the code. - - - - - 5e4da31b by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 refactor: Use BreakpointId in Core and Ifaces - - - - - 741ac3a8 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 stg2bc: Derive BcM via ReaderT StateT A small refactor that simplifies GHC.StgToByteCode by deriving-via the Monad instances for BcM. This is done along the lines of previous similar refactors like 72b54c0760bbf85be1f73c1a364d4701e5720465. - - - - - 0414fcc9 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 refact: Split InternalModBreaks out of ModBreaks There are currently two competing ways of referring to a Breakpoint: 1. Using the Tick module + Tick index 2. Using the Info module + Info index 1. The Tick index is allocated during desugaring in `mkModBreaks`. It is used to refer to a breakpoint associated to a Core Tick. For a given Tick module, there are N Ticks indexed by Tick index. 2. The Info index is allocated during code generation (in StgToByteCode) and uniquely identifies the breakpoints at runtime (and is indeed used to determine which breakpoint was hit at runtime). Why we need both is described by Note [Breakpoint identifiers]. For every info index we used to keep a `CgBreakInfo`, a datatype containing information relevant to ByteCode Generation, in `ModBreaks`. This commit splits out the `IntMap CgBreakInfo` out of `ModBreaks` into a new datatype `InternalModBreaks`. - The purpose is to separate the `ModBreaks` datatype, which stores data associated from tick-level information which is fixed after desugaring, from the unrelated `IntMap CgBreakInfo` information accumulated during bytecode generation. - We move `ModBreaks` to GHC.HsToCore.Breakpoints The new `InternalModBreaks` simply combines the `IntMap CgBreakInfo` with `ModBreaks`. After code generation we construct an `InternalModBreaks` with the `CgBreakInfo`s we accumulated and the existing `ModBreaks` and store that in the compiled BCO in `bc_breaks`. - Note that we previously only updated the `modBreaks_breakInfo` field of `ModBreaks` at this exact location, and then stored the updated `ModBreaks` in the same `bc_breaks`. - We put this new datatype in GHC.ByteCode.Breakpoints The rest of the pipeline for which CgBreakInfo is relevant is accordingly updated to also use `InternalModBreaks` - - - - - 2a097955 by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 cleanup: Use BreakpointIds in bytecode gen Small clean up to use BreakpointId and InternalBreakpointId more uniformly in bytecode generation rather than using Module + Ix pairs - - - - - 0515cc2f by Rodrigo Mesquita at 2025-07-08T07:40:30-04:00 ghci: Allocate BreakArrays at link time only Previously, a BreakArray would be allocated with a slot for every tick in a module at `mkModBreaks`, in HsToCore. However, this approach has a few downsides: - It interleaves interpreter behaviour (allocating arrays for breakpoints) within the desugarer - It is inflexible in the sense it is impossible for the bytecode generator to add "internal" breakpoints that can be triggered at runtime, because those wouldn't have a source tick. (This is relevant for our intended implementation plan of step-out in #26042) - It ties the BreakArray indices to the *tick* indexes, while at runtime we would rather just have the *info* indexes (currently we have both because BreakArrays are indexed by the *tick* one). Paving the way for #26042 and #26064, this commit moves the allocation of BreakArrays to bytecode-loading time -- akin to what is done for CCS arrays. Since a BreakArray is allocated only when bytecode is linked, if a breakpoint is set (e.g. `:break 10`) before the bytecode is linked, there will exist no BreakArray to trigger the breakpoint in. Therefore, the function to allocate break arrays (`allocateBreakArrays`) is exposed and also used in GHC.Runtime.Eval to allocate a break array when a breakpoint is set, if it doesn't exist yet (in the linker env). - - - - - 8016561f by Simon Peyton Jones at 2025-07-08T07:41:13-04:00 Add a test for T26176 - - - - - 454cd682 by Simon Peyton Jones at 2025-07-08T07:41:13-04:00 Add test for #14010 This test started to work in GHC 9.6 and has worked since. This MR just adds a regression test - - - - - ea2c6673 by Teo Camarasu at 2025-07-08T13:24:43-04:00 Implement user-defined allocation limit handlers Allocation Limits allow killing a thread if they allocate more than a user-specified limit. We extend this feature to allow more versatile behaviour. - We allow not killing the thread if the limit is exceeded. - We allow setting a custom handler to be called when the limit is exceeded. User-specified allocation limit handlers run in a fresh thread and are passed the ThreadId of the thread that exceeded its limit. We introduce utility functions for getting and setting the allocation limits of other threads, so that users can reset the limit of a thread from a handler. Both of these are somewhat coarse-grained as we are unaware of the allocations in the current nursery chunk. We provide several examples of usages in testsuite/tests/rts/T22859.hs Resolves #22859 - - - - - 03e047f9 by Simon Hengel at 2025-07-08T13:25:25-04:00 Fix typo in using.rst - - - - - 2e187b8f by Andreas Klebinger at 2025-07-09T14:12:30+01:00 Specialise: Improve specialisation by refactoring interestingDict This MR addresses #26051, which concerns missed type-class specialisation. The main payload of the MR is to completely refactor the key function `interestingDict` in GHC.Core.Opt.Specialise The main change is that we now also look at the structure of the dictionary we consider specializing on, rather than only the type. See the big `Note [Interesting dictionary arguments]` - - - - - 24620d5a by Simon Peyton Jones at 2025-07-09T14:12:46+01:00 Treat tuple dictionaries uniformly; don't unbox them See `Note [Do not unbox class dictionaries]` in DmdAnal.hs, sep (DNB1). This MR reverses the plan in #23398, which suggested a special case to unbox tuple dictionaries in worker/wrapper. But: - This was the cause of a pile of complexity in the specialiser (#26158) - Even with that complexity, specialision was still bad, very bad See https://gitlab.haskell.org/ghc/ghc/-/issues/19747#note_626297 And it's entirely unnecessary! Specialision works fine without unboxing tuple dictionaries. - - - - - dd38c198 by Andreas Klebinger at 2025-07-09T14:13:14+01:00 Remove complex special case from the type-class specialiser There was a pretty tricky special case in Specialise which is no longer necessary. * Historical Note [Floating dictionaries out of cases] * #26158 * #19747 https://gitlab.haskell.org/ghc/ghc/-/issues/19747#note_626297 This MR removes it. Hooray. - - - - - 68e88cfc by Simon Peyton Jones at 2025-07-09T14:13:25+01:00 Accept change to T23398 - - - - - 162 changed files: - compiler/GHC.hs - compiler/GHC/Builtin/primops.txt.pp - compiler/GHC/ByteCode/Asm.hs - + compiler/GHC/ByteCode/Breakpoints.hs - compiler/GHC/ByteCode/Instr.hs - compiler/GHC/ByteCode/Linker.hs - compiler/GHC/ByteCode/Types.hs - compiler/GHC/Core/FVs.hs - compiler/GHC/Core/Lint.hs - compiler/GHC/Core/Map/Expr.hs - compiler/GHC/Core/Opt/DmdAnal.hs - compiler/GHC/Core/Opt/OccurAnal.hs - compiler/GHC/Core/Opt/Simplify/Iteration.hs - compiler/GHC/Core/Opt/Specialise.hs - compiler/GHC/Core/Ppr.hs - compiler/GHC/Core/Predicate.hs - compiler/GHC/Core/Subst.hs - compiler/GHC/Core/Tidy.hs - compiler/GHC/Core/TyCon.hs - compiler/GHC/Core/Utils.hs - compiler/GHC/CoreToIface.hs - compiler/GHC/CoreToStg.hs - compiler/GHC/CoreToStg/Prep.hs - compiler/GHC/Driver/Config.hs - + compiler/GHC/Driver/Session/Inspect.hs - compiler/GHC/HsToCore.hs - compiler/GHC/HsToCore/Breakpoints.hs - compiler/GHC/HsToCore/Ticks.hs - compiler/GHC/Iface/Syntax.hs - compiler/GHC/Iface/Tidy.hs - compiler/GHC/IfaceToCore.hs - compiler/GHC/Linker/Loader.hs - compiler/GHC/Linker/Types.hs - compiler/GHC/Runtime/Debugger/Breakpoints.hs - compiler/GHC/Runtime/Eval.hs - compiler/GHC/Runtime/Eval/Types.hs - compiler/GHC/Runtime/Interpreter.hs - compiler/GHC/Runtime/Interpreter/Types.hs - compiler/GHC/Stg/BcPrep.hs - compiler/GHC/Stg/FVs.hs - compiler/GHC/StgToByteCode.hs - compiler/GHC/StgToCmm/Prim.hs - compiler/GHC/StgToJS/Prim.hs - compiler/GHC/Tc/Solver.hs - compiler/GHC/Tc/Solver/Dict.hs - compiler/GHC/Tc/Solver/InertSet.hs - compiler/GHC/Tc/Solver/Monad.hs - compiler/GHC/Tc/Utils/TcType.hs - − compiler/GHC/Types/Breakpoint.hs - compiler/GHC/Types/Tickish.hs - compiler/GHC/Unit/Module/ModGuts.hs - compiler/ghc.cabal.in - docs/users_guide/exts/doandifthenelse.rst - docs/users_guide/exts/ffi.rst - docs/users_guide/ghci.rst - docs/users_guide/using.rst - ghc/GHCi/UI.hs - hadrian/src/Oracles/Flag.hs - hadrian/src/Rules/Generate.hs - hadrian/src/Settings/Builders/Cabal.hs - hadrian/src/Settings/Packages.hs - hadrian/src/Settings/Program.hs - libraries/base/changelog.md - libraries/ghc-experimental/ghc-experimental.cabal.in - + libraries/ghc-experimental/src/System/Mem/Experimental.hs - libraries/ghc-heap/GHC/Exts/Heap/Closures.hs - libraries/ghc-heap/GHC/Exts/Heap/FFIClosures_ProfilingDisabled.hsc - libraries/ghc-heap/GHC/Exts/Heap/FFIClosures_ProfilingEnabled.hsc - libraries/ghc-heap/tests/parse_tso_flags.hs - libraries/ghc-internal/ghc-internal.cabal.in - + libraries/ghc-internal/src/GHC/Internal/AllocationLimitHandler.hs - libraries/ghc-internal/src/GHC/Internal/List.hs - + libraries/ghci/GHCi/Debugger.hs - libraries/ghci/GHCi/Message.hs - libraries/ghci/GHCi/Run.hs - libraries/ghci/ghci.cabal.in - + rts/AllocArray.c - + rts/AllocArray.h - rts/Disassembler.c - rts/Heap.c - rts/Interpreter.c - rts/Interpreter.h - rts/Prelude.h - rts/PrimOps.cmm - rts/RtsStartup.c - rts/RtsSymbols.c - rts/RtsUtils.c - rts/Schedule.c - rts/StgMiscClosures.cmm - rts/ThreadLabels.c - rts/Threads.c - rts/Weak.c - rts/external-symbols.list.in - rts/include/Rts.h - rts/include/rts/Bytecodes.h - rts/include/rts/Constants.h - rts/include/rts/prof/CCS.h - rts/include/rts/storage/Closures.h - rts/include/rts/storage/GC.h - rts/include/rts/storage/Heap.h - rts/include/rts/storage/TSO.h - rts/include/stg/MiscClosures.h - rts/rts.cabal - rts/sm/Storage.c - testsuite/tests/backpack/cabal/bkpcabal08/bkpcabal08.stdout - testsuite/tests/count-deps/CountDepsAst.stdout - testsuite/tests/count-deps/CountDepsParser.stdout - testsuite/tests/dmdanal/should_compile/T23398.hs - testsuite/tests/dmdanal/should_compile/T23398.stderr - + testsuite/tests/ghci.debugger/scripts/T26042b.hs - + testsuite/tests/ghci.debugger/scripts/T26042b.script - + testsuite/tests/ghci.debugger/scripts/T26042b.stdout - + testsuite/tests/ghci.debugger/scripts/T26042c.hs - + testsuite/tests/ghci.debugger/scripts/T26042c.script - + testsuite/tests/ghci.debugger/scripts/T26042c.stdout - + testsuite/tests/ghci.debugger/scripts/T26042d.hs - + testsuite/tests/ghci.debugger/scripts/T26042d.script - + testsuite/tests/ghci.debugger/scripts/T26042d.stdout - + testsuite/tests/ghci.debugger/scripts/T26042e.hs - + testsuite/tests/ghci.debugger/scripts/T26042e.script - + testsuite/tests/ghci.debugger/scripts/T26042e.stdout - + testsuite/tests/ghci.debugger/scripts/T26042f.hs - + testsuite/tests/ghci.debugger/scripts/T26042f.script - + testsuite/tests/ghci.debugger/scripts/T26042f1.stderr - + testsuite/tests/ghci.debugger/scripts/T26042f1.stdout - + testsuite/tests/ghci.debugger/scripts/T26042f2.stdout - + testsuite/tests/ghci.debugger/scripts/T26042g.hs - + testsuite/tests/ghci.debugger/scripts/T26042g.script - + testsuite/tests/ghci.debugger/scripts/T26042g.stdout - testsuite/tests/ghci.debugger/scripts/all.T - + testsuite/tests/indexed-types/should_fail/T26176.hs - + testsuite/tests/indexed-types/should_fail/T26176.stderr - testsuite/tests/indexed-types/should_fail/all.T - testsuite/tests/interface-stability/base-exports.stdout - testsuite/tests/interface-stability/base-exports.stdout-javascript-unknown-ghcjs - testsuite/tests/interface-stability/base-exports.stdout-mingw32 - testsuite/tests/interface-stability/base-exports.stdout-ws-32 - testsuite/tests/interface-stability/ghc-experimental-exports.stdout - testsuite/tests/interface-stability/ghc-experimental-exports.stdout-mingw32 - testsuite/tests/interface-stability/ghc-prim-exports.stdout - testsuite/tests/interface-stability/ghc-prim-exports.stdout-mingw32 - + testsuite/tests/perf/should_run/SpecTyFamRun.hs - + testsuite/tests/perf/should_run/SpecTyFamRun.stdout - + testsuite/tests/perf/should_run/SpecTyFam_Import.hs - testsuite/tests/perf/should_run/all.T - + testsuite/tests/rts/T22859.hs - + testsuite/tests/rts/T22859.stderr - testsuite/tests/rts/all.T - + testsuite/tests/simplCore/should_compile/T26051.hs - + testsuite/tests/simplCore/should_compile/T26051.stderr - + testsuite/tests/simplCore/should_compile/T26051_Import.hs - testsuite/tests/simplCore/should_compile/all.T - + testsuite/tests/typecheck/should_compile/T14010.hs - testsuite/tests/typecheck/should_compile/all.T - utils/haddock/CHANGES.md - utils/haddock/haddock-api/src/Haddock/Interface/AttachInstances.hs - utils/haddock/haddock-api/src/Haddock/Interface/Create.hs - utils/haddock/haddock-api/src/Haddock/Types.hs - utils/haddock/haddock-test/src/Test/Haddock/Config.hs - utils/haddock/html-test/ref/Bug1004.html - + utils/haddock/html-test/ref/Bug25739.html - + utils/haddock/html-test/src/Bug25739.hs The diff was not included because it is too large. View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/d95dd9514120408be196786e91d6b4f... -- View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/d95dd9514120408be196786e91d6b4f... You're receiving this email because of your account on gitlab.haskell.org.