Simon Peyton Jones pushed to branch wip/T20264 at Glasgow Haskell Compiler / GHC
Commits:
79816cc4 by Rodrigo Mesquita at 2025-09-02T12:19:59-04:00
cleanup: Move dehydrateCgBreakInfo to Stg2Bc
This no longer has anything to do with Core.
- - - - -
53da94ff by Rodrigo Mesquita at 2025-09-02T12:19:59-04:00
rts/Disassembler: Fix spacing of BRK_FUN
- - - - -
08c0cf85 by Rodrigo Mesquita at 2025-09-02T12:19:59-04:00
debugger: Fix bciPtr in Step-out
We need to use `BCO_NEXT` to move bciPtr to ix=1, because ix=0 points to
the instruction itself!
I do not understand how this didn't crash before.
- - - - -
e7e021fa by Rodrigo Mesquita at 2025-09-02T12:19:59-04:00
debugger: Allow BRK_FUNs to head case continuation BCOs
When we start executing a BCO, we may want to yield to the scheduler:
this may be triggered by a heap/stack check, context switch, or a
breakpoint. To yield, we need to put the stack in a state such that
when execution is resumed we are back to where we yielded from.
Previously, a BKR_FUN could only head a function BCO because we only
knew how to construct a valid stack for yielding from one -- simply add
`apply_interp_info` + the BCO to resume executing. This is valid because
the stack at the start of run_BCO is headed by that BCO's arguments.
However, in case continuation BCOs (as per Note [Case continuation BCOs]),
we couldn't easily reconstruct a valid stack that could be resumed
because we dropped too soon the stack frames regarding the value
returned (stg_ret) and received (stg_ctoi) by that continuation.
This is especially tricky because of the variable type and size return
frames (e.g. pointer ret_p/ctoi_R1p vs a tuple ret_t/ctoi_t2).
The trick to being able to yield from a BRK_FUN at the start of a case
cont BCO is to stop removing the ret frame headers eagerly and instead
keep them until the BCO starts executing. The new layout at the start of
a case cont. BCO is described by the new Note [Stack layout when entering run_BCO].
Now, we keep the ret_* and ctoi_* frames when entering run_BCO.
A BRK_FUN is then executed if found, and the stack is yielded as-is with
the preserved ret and ctoi frames.
Then, a case cont BCO's instructions always SLIDE off the headers of the
ret and ctoi frames, in StgToByteCode.doCase, turning a stack like
| .... |
+---------------+
| fv2 |
+---------------+
| fv1 |
+---------------+
| BCO |
+---------------+
| stg_ctoi_ret_ |
+---------------+
| retval |
+---------------+
| stg_ret_..... |
+---------------+
into
| .... |
+---------------+
| fv2 |
+---------------+
| fv1 |
+---------------+
| retval |
+---------------+
for the remainder of the BCO.
Moreover, this more uniform approach of keeping the ret and ctoi frames
means we need less ad-hoc logic concerning the variable size of
ret_tuple vs ret_p/np frames in the code generator and interpreter:
Always keep the return to cont. stack intact at the start of run_BCO,
and the statically generated instructions will take care of adjusting
it.
Unlocks BRK_FUNs at the start of case cont. BCOs which will enable a
better user-facing step-out (#26042) which is free of the bugs the
current BRK_ALTS implementation suffers from (namely, using BRK_FUN
rather than BRK_ALTS in a case cont. means we'll never accidentally end
up in a breakpoint "deeper" than the continuation, because we stop at
the case cont itself rather than on the first breakpoint we evaluate
after it).
- - - - -
ade3c1e6 by Rodrigo Mesquita at 2025-09-02T12:19:59-04:00
BRK_FUN with InternalBreakLocs for code-generation time breakpoints
At the start of a case continuation BCO, place a BRK_FUN.
This BRK_FUN uses the new "internal breakpoint location" -- allowing us
to come up with a valid source location for this breakpoint that is not associated with a source-level tick.
For case continuation BCOs, we use the last tick seen before it as the
source location. The reasoning is described in Note [Debugger: Stepout internal break locs].
Note how T26042c, which was broken because it displayed the incorrect
behavior of the previous step out when we'd end up at a deeper level
than the one from which we initiated step-out, is now fixed.
As of this commit, BRK_ALTS is now dead code and is thus dropped.
Note [Debugger: Stepout internal break locs]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Step-out tells the interpreter to run until the current function
returns to where it was called from, and stop there.
This is achieved by enabling the BRK_FUN found on the first RET_BCO
frame on the stack (See [Note Debugger: Step-out]).
Case continuation BCOs (which select an alternative branch) must
therefore be headed by a BRK_FUN. An example:
f x = case g x of <--- end up here
1 -> ...
2 -> ...
g y = ... <--- step out from here
- `g` will return a value to the case continuation BCO in `f`
- The case continuation BCO will receive the value returned from g
- Match on it and push the alternative continuation for that branch
- And then enter that alternative.
If we step-out of `g`, the first RET_BCO on the stack is the case
continuation of `f` -- execution should stop at its start, before
selecting an alternative. (One might ask, "why not enable the breakpoint
in the alternative instead?", because the alternative continuation is
only pushed to the stack *after* it is selected by the case cont. BCO)
However, the case cont. BCO is not associated with any source-level
tick, it is merely the glue code which selects alternatives which do
have source level ticks. Therefore, we have to come up at code
generation time with a breakpoint location ('InternalBreakLoc') to
display to the user when it is stopped there.
Our solution is to use the last tick seen just before reaching the case
continuation. This is robust because a case continuation will thus
always have a relevant breakpoint location:
- The source location will be the last source-relevant expression
executed before the continuation is pushed
- So the source location will point to the thing you've just stepped
out of
- Doing :step-local from there will put you on the selected
alternative (which at the source level may also be the e.g. next
line in a do-block)
Examples, using angle brackets (<<...>>) to denote the breakpoint span:
f x = case <<g x>> {- step in here -} of
1 -> ...
2 -> ...>
g y = <<...>> <--- step out from here
...
f x = <
2025-07-29 10:50:36.560949 UTC 160,161c160 < PUSH_L 0 < SLIDE 1 2
SLIDE 1 1
164,165d162 < PUSH_L 0 < SLIDE 1 1 175,176c172 < PUSH_L 0 < SLIDE 1 2 ---
SLIDE 1 1
179,180d174 < PUSH_L 0 < SLIDE 1 1 206,207d199 < PUSH_L 0 < SLIDE 1 1 210,211d201 < PUSH_L 0 < SLIDE 1 1 214,215d203 < PUSH_L 0 < SLIDE 1 1 218,219d205 < PUSH_L 0 < SLIDE 1 1 222,223d207 < PUSH_L 0 < SLIDE 1 1 ... 600,601c566 < PUSH_L 0 < SLIDE 1 2 ---
SLIDE 1 1
604,605d568 < PUSH_L 0 < SLIDE 1 1 632,633d594 < PUSH_L 0 < SLIDE 1 1 636,637d596 < PUSH_L 0 < SLIDE 1 1 640,641d598 < PUSH_L 0 < SLIDE 1 1 644,645d600 < PUSH_L 0 < SLIDE 1 1 648,649d602 < PUSH_L 0 < SLIDE 1 1 652,653d604 < PUSH_L 0 < SLIDE 1 1 656,657d606 < PUSH_L 0 < SLIDE 1 1 660,661d608 < PUSH_L 0 < SLIDE 1 1 664,665d610 < PUSH_L 0 < SLIDE 1 1 ``` I also compiled lib:Cabal to bytecode and counted the number of bytecode lines with `find dist-newstyle -name "*.dump-BCOs" -exec wc {} +`: with unoptimized core: 1190689 lines (before) - 1172891 lines (now) = 17798 less redundant instructions (-1.5% lines) with optimized core: 1924818 lines (before) - 1864836 lines (now) = 59982 less redundant instructions (-3.1% lines) - - - - - 8b2c72c0 by L0neGamer at 2025-09-04T06:32:03-04:00 Add Control.Monad.thenM and Control.Applicative.thenA - - - - - 39e1b7cb by Teo Camarasu at 2025-09-04T06:32:46-04:00 ghc-internal: invert dependency of GHC.Internal.TH.Syntax on Data.Data This means that Data.Data no longer blocks building TH.Syntax, which allows greater parallelism in our builds. We move the Data.Data.Data instances to Data.Data. Quasi depends on Data.Data for one of its methods, so, we split the Quasi/Q, etc definition out of GHC.Internal.TH.Syntax into its own module. This has the added benefit of splitting up this quite large module. Previously TH.Syntax was a bottleneck when compiling ghc-internal. Now it is less of a bottle-neck and is also slightly quicker to compile (since it no longer contains these instances) at the cost of making Data.Data slightly more expensive to compile. TH.Lift which depends on TH.Syntax can also compile quicker and no longer blocks ghc-internal finishing to compile. Resolves #26217 ------------------------- Metric Decrease: MultiLayerModulesTH_OneShot T13253 T21839c T24471 Metric Increase: T12227 ------------------------- - - - - - bdf82fd2 by Teo Camarasu at 2025-09-04T06:32:46-04:00 compiler: delete unused names in Builtins.Names.TH returnQ and bindQ are no longer used in the compiler. There was also a very old comment that referred to them that I have modernized - - - - - 41a448e5 by Ben Gamari at 2025-09-04T19:21:43-04:00 hadrian: Pass lib & include directories to ghc `Setup configure` - - - - - 46bb9a79 by Ben Gamari at 2025-09-04T19:21:44-04:00 rts/IPE: Fix compilation when zstd is enabled This was broken by the refactoring undertaken in c80dd91c0bf6ac034f0c592f16c548b9408a8481. Closes #26312. - - - - - 138a6e34 by sheaf at 2025-09-04T19:22:46-04:00 Make mkCast assertion a bit clearer This commit changes the assertion message that gets printed when one calls mkCast with a coercion whose kind does not match the type of the inner expression. I always found the assertion message a bit confusing, as it didn't clearly state what exactly was the error. - - - - - 9d626be1 by sheaf at 2025-09-04T19:22:46-04:00 Simplifier/rules: fix mistakes in Notes & comments - - - - - 94b62aa7 by Simon Peyton Jones at 2025-09-08T03:37:14-04:00 Refactor ForAllCo This is a pure refactor, addressing #26389. It arranges that the kind coercion in a ForAllCo is a MCoercion, rather than a plain Coercion, thus removing redundancy in the common case. See (FC8) in Note [ForAllCo] It's a nice cleanup. - - - - - 624afa4a by sheaf at 2025-09-08T03:38:05-04:00 Use tcMkScaledFunTys in matchExpectedFunTys We should use tcMkScaledFunTys rather than mkScaledFunTys in GHC.Tc.Utils.Unify.matchExpectedFunTys, as the latter crashes when the kind of the result type is a bare metavariable. We know the result is always Type-like, so we don't need scaledFunTys to try to rediscover that from the kind. Fixes #26277 - - - - - 0975d2b6 by sheaf at 2025-09-08T03:38:54-04:00 Revert "Remove hptAllFamInstances usage during upsweep" This reverts commit 3bf6720eff5e86e673568e756161e6d6150eb440. - - - - - 0cf34176 by soulomoon at 2025-09-08T03:38:54-04:00 Family consistency checks: add test for #26154 This commit adds the test T26154, to make sure that GHC doesn't crash when performing type family consistency checks. This test case was extracted from Agda. Fixes #26154 - - - - - ba210d98 by Simon Peyton Jones at 2025-09-08T16:26:36+01:00 Report solid equality errors before custom errors This MR fixes #26255 by * Reporting solid equality errors like Int ~ Bool before "custom type errors". See comments in `report1` in `reportWanteds` * Suppressing errors that arise from superclasses of Wanteds. See (SCE1) in Note [Suppressing confusing errors] More details in #26255. - - - - - b6249140 by Simon Peyton Jones at 2025-09-10T10:42:38-04:00 Fix a scoping error in Specialise This small patch fixes #26329, which triggered a scoping error. Test is in T21391, with -fpolymorphic-specialisation enabled - - - - - 45305ab8 by sheaf at 2025-09-10T10:43:29-04:00 Make rationalTo{Float,Double} inline in phase 0 We hold off on inlining these until phase 0 to allow constant-folding rules to fire. However, once we get to phase 0, we should inline them, e.g. to expose unboxing opportunities. See CLC proposal #356. - - - - - 0959d4bc by Andreas Klebinger at 2025-09-10T10:44:12-04:00 Add regression test for #26056 - - - - - dc79593d by sheaf at 2025-09-10T10:45:01-04:00 Deep subsumption: unify mults without tcEqMult As seen in #26332, we may well end up with a non-reflexive multiplicity coercion when doing deep subsumption. We should do the same thing that we do without deep subsumption: unify the multiplicities normally, without requiring that the coercion is reflexive (which is what 'tcEqMult' was doing). Fixes #26332 - - - - - 4bfe2269 by sheaf at 2025-09-10T10:45:50-04:00 lint-codes: fixup MSYS drive letter on Windows This change ensures that System.Directory.listDirectory doesn't trip up on an MSYS-style path like '/c/Foo' when trying to list all testsuite stdout/stderr files as required for testing coverage of GHC diagnostic codes in the testsuite. Fixes #25178 - - - - - 56540775 by Ben Gamari at 2025-09-10T10:46:32-04:00 gitlab-ci: Disable split sections on FreeBSD Due to #26303. - - - - - 1537784b by Moritz Angermann at 2025-09-10T10:47:13-04:00 Improve mach-o relocation information This change adds more information about the symbol and addresses we try to relocate in the linker. This significantly helps when deubbging relocation issues reported by users. - - - - - 4e67855b by Moritz Angermann at 2025-09-10T10:47:54-04:00 test.mk expect GhcLeadingUnderscore, not LeadingUnderscore (in line with the other Ghc prefixed variables. - - - - - c1cdd265 by Moritz Angermann at 2025-09-10T10:48:35-04:00 testsuite: Fix broken exec_signals_child.c There is no signal 0. The signal mask is 1-32. - - - - - 99ac335c by Moritz Angermann at 2025-09-10T10:49:15-04:00 testsuite: clarify Windows/Darwin locale rationale for skipping T6037 T2507 T8959a - - - - - 0e8fa77a by Moritz Angermann at 2025-09-10T10:49:56-04:00 Skip broken tests on macOS (due to leading underscore not handled properly in the expected output.) - - - - - 28570c59 by Zubin Duggal at 2025-09-10T10:50:37-04:00 docs(sphinx): fix links to reverse flags when using the :ghc-flag:`-fno-<flag>` syntax This solution is rather hacky and I suspect there is a better way to do this but I don't know enough about Sphinx to do better. Fixes #26352 - - - - - 75c28316 by Joseph Fourment at 2025-09-11T14:35:43+01:00 Add type-lets into Core The plan for #20264 is to introduce let-bound types to have observable sharing in types. To avoid the need to carry an environment when dealing with occurrences of these type variables, we embed the types they're bound to (if any) in a `tv_unfolding :: Maybe Type` attribute. This way, one can look through let-bound type variables using `coreView` and friends. In particular, definitional equality looks through unfoldings. simple-opt: don't inline type-lets specialise: fix type-lets in DFun unfoldings During specialisation, a dictionary being specialised gets a new unfolding by turning `DFun \ bndrs -> MkD @<T1> ... @<Tm> <op1> ... <opn>` into `DFun \ spec_bndrs -> MkD @((\ bndrs -> TYPE: <T1>) spec_args) ... ((\ bndrs -> <opn>) spec_args)` which in turns gets beta-reduced into `DFun \ spec_bndrs -> MkD (let { bndrs = spec_args } in TYPE: <T1>) ... (let { bndrs = spec_args } in <opn>)`. Previously, such let binders would immediately be substituted into the type so it didn't cause any issue, but now we want to avoid inlining. Arguments of the form `let { bndrs = spec_args } in TYPE: <T1>` are not considered as type arguments since they're not of the canonical form `TYPE: something`. This commit restores the previous behavior of substituting the specialised type arguments. Alternatively, we could attach some floated type bindings to `DFun`s. occur-anal: implement occurence analysis for type variables In order to find out let-bound type variables that are used only once, in the hope of inlining them, we need to track type variables as well in the occurrence analiser. Just like Id's, we attach an `OccInfo` to each (immutable) type variable, and we walk into types and coercions to accurately gather occurrences. simplifier: don't inline type-lets Keep propagating type-lets further down the pipeline, in the simplifier. We also update CallArity, CprAnal, DmdAnal, WorkWrap, and Specialise to ignore type-lets. prep: make type-lets pass through CorePrep As a first attempt, ignore type-lets in CorePrep to avoid crashes. However, this is not enough: CorePrep also does some let-floating. If we don't float type-lets along with value-level let-bindings, the latter can float out of the scope of a type variable in use. simple-opt: fix simple_type_bind Also: - Inline small types using a new typeIsSmallEnoughToInline predicate - Inline single-occurrence variables simple-opt: make beta-reduction use simple_bind_type iface: add IfaceTypeLetBndr to represent non-top-level type-let binders IfaceLetBndr isn't fit to represent type-let binders, as it includes a bunch of vacuous flags for Ids only. Instead of putting squares in circles, I added a new constructor for type binders. The downside is that it breaks existing iface files, so since we can't bootstrap yet so we have to bootstrap a cherry-picked branch and then checkout again to build with --freeze1. To avoid similar issues in the future, IfaceTyVarInfoItem serialises with a tag despite there being only one constructor for now. dmd-anal: prefix unused variable with _ to avoid warning type: inline unfoldView in sORTKind_maybe tidy: deal with type-lets notes: add Note [Type and coercion lets] notes: update Note [Comparing nullary type synonyms] to account for type variables While updating backlinks, I noticed the optimisation for type variables could be performed in more places. simplifier: inline single-occurring type-lets cleanup: remove NOINLINE on tyVarOccInfo Wibbles Wibbles Progress Progress More progress Progress ...doesn't compile though Mostly working now Aggressively create type-lets more progress More progress Temp debug printing Remove bogus assert Fix anoher couple of bugs in SimpleOpt and exprIsTrivial Improve zonking of foreign decls to avoid TcTyVars escaping Wibbles Some small wibbles Improvements Rmmove trace Wibbles Use lambda, not let, in WorkWrap Using type let did not work right with type lets and shadowing Requires Lint to be OK join points under beta redexes -- but it is! Needs better documentation Wibbles More improvements More improvements * Less cloning in SpecConstr * Lint checks RULES for imported binders Comments only Wibble Wibbles Wibbles .. getting Lint errors when compiling GHC.Internal.Classes Wibbles More improvements ..now getting to the back end an interface file generation Wibbles Wibble unsed var Missing case in tyThingEntityInfo Add IfaceExtTyVar Wibbles Start to make OccAnal count TyCoVars properly [skip ci] Proper occurrence analysis for TyCoVars Wibble imports Wibble imports again Fix two tricky buglets More small fixes Add missing mkAbsCoreApps ...which caused bad Lint errors More wibbles More wibbles exp around mkPolyAbsLams - - - - - 7cdae39a by Simon Peyton Jones at 2025-09-11T14:35:43+01:00 Make it compile again - - - - - 213 changed files: - .gitlab/generate-ci/gen_ci.hs - .gitlab/jobs.yaml - compiler/GHC/Builtin/Names/TH.hs - compiler/GHC/ByteCode/Asm.hs - compiler/GHC/ByteCode/Breakpoints.hs - compiler/GHC/ByteCode/Instr.hs - compiler/GHC/Core.hs - compiler/GHC/Core/Coercion.hs - compiler/GHC/Core/Coercion.hs-boot - compiler/GHC/Core/Coercion/Axiom.hs - compiler/GHC/Core/Coercion/Opt.hs - compiler/GHC/Core/DataCon.hs - compiler/GHC/Core/FVs.hs - compiler/GHC/Core/Lint.hs - compiler/GHC/Core/Make.hs - compiler/GHC/Core/Opt/Arity.hs - compiler/GHC/Core/Opt/CSE.hs - compiler/GHC/Core/Opt/CallArity.hs - compiler/GHC/Core/Opt/CprAnal.hs - compiler/GHC/Core/Opt/DmdAnal.hs - compiler/GHC/Core/Opt/Exitify.hs - compiler/GHC/Core/Opt/FloatIn.hs - compiler/GHC/Core/Opt/OccurAnal.hs - compiler/GHC/Core/Opt/SetLevels.hs - compiler/GHC/Core/Opt/Simplify.hs - compiler/GHC/Core/Opt/Simplify/Env.hs - compiler/GHC/Core/Opt/Simplify/Iteration.hs - compiler/GHC/Core/Opt/Simplify/Monad.hs - compiler/GHC/Core/Opt/Simplify/Utils.hs - compiler/GHC/Core/Opt/SpecConstr.hs - compiler/GHC/Core/Opt/Specialise.hs - compiler/GHC/Core/Opt/WorkWrap.hs - compiler/GHC/Core/Opt/WorkWrap/Utils.hs - compiler/GHC/Core/Ppr.hs - compiler/GHC/Core/Predicate.hs - compiler/GHC/Core/Reduction.hs - compiler/GHC/Core/Rules.hs - compiler/GHC/Core/Seq.hs - compiler/GHC/Core/SimpleOpt.hs - compiler/GHC/Core/Subst.hs - compiler/GHC/Core/Tidy.hs - compiler/GHC/Core/TyCo/Compare.hs - compiler/GHC/Core/TyCo/FVs.hs - compiler/GHC/Core/TyCo/Ppr.hs - compiler/GHC/Core/TyCo/Ppr.hs-boot - compiler/GHC/Core/TyCo/Rep.hs - compiler/GHC/Core/TyCo/Subst.hs - compiler/GHC/Core/TyCo/Tidy.hs - compiler/GHC/Core/Type.hs - compiler/GHC/Core/Unfold/Make.hs - compiler/GHC/Core/Unify.hs - compiler/GHC/Core/Utils.hs - compiler/GHC/CoreToIface.hs - compiler/GHC/CoreToStg.hs - compiler/GHC/CoreToStg/Prep.hs - compiler/GHC/Data/IOEnv.hs - compiler/GHC/Driver/CodeOutput.hs - compiler/GHC/Driver/Config/Core/Lint.hs - compiler/GHC/Driver/DynFlags.hs - compiler/GHC/Driver/Env.hs - compiler/GHC/Driver/Flags.hs - compiler/GHC/Driver/Pipeline/Execute.hs - compiler/GHC/Driver/Session.hs - compiler/GHC/Hs/Expr.hs - compiler/GHC/HsToCore/Binds.hs - compiler/GHC/HsToCore/Monad.hs - compiler/GHC/HsToCore/Pmc/Solver.hs - compiler/GHC/HsToCore/Pmc/Utils.hs - compiler/GHC/HsToCore/Quote.hs - compiler/GHC/Iface/Decl.hs - compiler/GHC/Iface/Ext/Types.hs - compiler/GHC/Iface/Ext/Utils.hs - compiler/GHC/Iface/Load.hs - compiler/GHC/Iface/Rename.hs - compiler/GHC/Iface/Syntax.hs - compiler/GHC/Iface/Tidy.hs - compiler/GHC/Iface/Type.hs - compiler/GHC/IfaceToCore.hs - compiler/GHC/Linker/Loader.hs - compiler/GHC/Rename/Splice.hs - compiler/GHC/Runtime/Debugger/Breakpoints.hs - compiler/GHC/Runtime/Eval.hs - compiler/GHC/Stg/Lint.hs - compiler/GHC/StgToByteCode.hs - compiler/GHC/Tc/Deriv.hs - compiler/GHC/Tc/Deriv/Infer.hs - compiler/GHC/Tc/Errors.hs - compiler/GHC/Tc/Errors/Ppr.hs - compiler/GHC/Tc/Gen/Bind.hs - compiler/GHC/Tc/Gen/Head.hs - compiler/GHC/Tc/Gen/HsType.hs - compiler/GHC/Tc/Gen/Pat.hs - compiler/GHC/Tc/Gen/Splice.hs - compiler/GHC/Tc/Gen/Splice.hs-boot - compiler/GHC/Tc/Instance/Family.hs - compiler/GHC/Tc/Module.hs - compiler/GHC/Tc/Solver/Rewrite.hs - compiler/GHC/Tc/TyCl.hs - compiler/GHC/Tc/TyCl/Utils.hs - compiler/GHC/Tc/Types/BasicTypes.hs - compiler/GHC/Tc/Types/Constraint.hs - compiler/GHC/Tc/Types/TH.hs - compiler/GHC/Tc/Utils/Env.hs - compiler/GHC/Tc/Utils/Monad.hs - compiler/GHC/Tc/Utils/TcMType.hs - compiler/GHC/Tc/Utils/TcType.hs - compiler/GHC/Tc/Utils/Unify.hs - compiler/GHC/Tc/Zonk/TcType.hs - compiler/GHC/Tc/Zonk/Type.hs - compiler/GHC/Types/Basic.hs - compiler/GHC/Types/Id.hs - compiler/GHC/Types/Id/Info.hs - compiler/GHC/Types/Id/Make.hs - compiler/GHC/Types/TyThing.hs - compiler/GHC/Types/TypeEnv.hs - compiler/GHC/Types/Var.hs - compiler/GHC/Unit/Home/Graph.hs - compiler/GHC/Unit/Home/PackageTable.hs - compiler/GHC/Utils/Outputable.hs - compiler/GHC/Utils/Trace.hs - compiler/Language/Haskell/Syntax/Decls.hs - docs/users_guide/flags.py - ghc/GHCi/UI.hs - hadrian/src/Oracles/TestSettings.hs - hadrian/src/Settings/Default.hs - hadrian/src/Settings/Packages.hs - hie.yaml - libraries/base/changelog.md - libraries/base/src/Control/Applicative.hs - libraries/base/src/Control/Monad.hs - libraries/base/src/Data/Array/Byte.hs - libraries/base/src/Data/Fixed.hs - + libraries/ghc-boot-th/GHC/Boot/TH/Monad.hs - libraries/ghc-boot-th/ghc-boot-th.cabal.in - libraries/ghc-internal/ghc-internal.cabal.in - libraries/ghc-internal/src/GHC/Internal/Base.hs - libraries/ghc-internal/src/GHC/Internal/Control/Monad.hs - libraries/ghc-internal/src/GHC/Internal/Data/Data.hs - libraries/ghc-internal/src/GHC/Internal/Float.hs - libraries/ghc-internal/src/GHC/Internal/List.hs - libraries/ghc-internal/src/GHC/Internal/TH/Lib.hs - libraries/ghc-internal/src/GHC/Internal/TH/Lift.hs - + libraries/ghc-internal/src/GHC/Internal/TH/Monad.hs - libraries/ghc-internal/src/GHC/Internal/TH/Quote.hs - libraries/ghc-internal/src/GHC/Internal/TH/Syntax.hs - libraries/ghci/GHCi/Message.hs - libraries/ghci/GHCi/Run.hs - libraries/ghci/GHCi/TH.hs - libraries/template-haskell/Language/Haskell/TH/Quote.hs - libraries/template-haskell/Language/Haskell/TH/Syntax.hs - linters/lint-codes/LintCodes/Coverage.hs - rts/Disassembler.c - rts/IPE.c - rts/Interpreter.c - rts/Profiling.c - rts/include/rts/Bytecodes.h - rts/linker/MachO.c - testsuite/ghc-config/ghc-config.hs - testsuite/tests/count-deps/CountDepsAst.stdout - testsuite/tests/count-deps/CountDepsParser.stdout - testsuite/tests/deriving/should_compile/T14682.stderr - testsuite/tests/deriving/should_compile/drv-empty-data.stderr - testsuite/tests/driver/all.T - testsuite/tests/ghci.debugger/scripts/T26042b.script - testsuite/tests/ghci.debugger/scripts/T26042b.stdout - testsuite/tests/ghci.debugger/scripts/T26042c.script - testsuite/tests/ghci.debugger/scripts/T26042c.stdout - + testsuite/tests/ghci.debugger/scripts/T26042d2.hs - + testsuite/tests/ghci.debugger/scripts/T26042d2.script - + testsuite/tests/ghci.debugger/scripts/T26042d2.stdout - testsuite/tests/ghci.debugger/scripts/T26042e.stdout - testsuite/tests/ghci.debugger/scripts/T26042f.script - testsuite/tests/ghci.debugger/scripts/T26042f1.stdout - testsuite/tests/ghci.debugger/scripts/T26042f2.stdout - testsuite/tests/ghci.debugger/scripts/T26042g.stdout - testsuite/tests/ghci.debugger/scripts/all.T - testsuite/tests/interface-stability/base-exports.stdout - testsuite/tests/interface-stability/base-exports.stdout-javascript-unknown-ghcjs - testsuite/tests/interface-stability/base-exports.stdout-mingw32 - testsuite/tests/interface-stability/base-exports.stdout-ws-32 - testsuite/tests/interface-stability/template-haskell-exports.stdout - + testsuite/tests/linear/should_compile/T26332.hs - testsuite/tests/linear/should_compile/all.T - testsuite/tests/plugins/plugins10.stdout - + testsuite/tests/profiling/should_compile/T26056.hs - testsuite/tests/profiling/should_compile/all.T - testsuite/tests/profiling/should_run/callstack001.stdout - testsuite/tests/rts/exec_signals_child.c - testsuite/tests/rts/linker/T11223/all.T - testsuite/tests/simplCore/should_compile/OpaqueNoCastWW.stderr - testsuite/tests/splice-imports/SI29.stderr - testsuite/tests/th/T11452.stderr - testsuite/tests/th/T15321.stderr - testsuite/tests/th/T7276.stderr - testsuite/tests/th/TH_NestedSplicesFail3.stderr - testsuite/tests/th/TH_NestedSplicesFail4.stderr - + testsuite/tests/typecheck/should_compile/T26154.hs - + testsuite/tests/typecheck/should_compile/T26154_A.hs - + testsuite/tests/typecheck/should_compile/T26154_B.hs - + testsuite/tests/typecheck/should_compile/T26154_B.hs-boot - + testsuite/tests/typecheck/should_compile/T26154_Other.hs - + testsuite/tests/typecheck/should_compile/T26277.hs - testsuite/tests/typecheck/should_compile/all.T - testsuite/tests/typecheck/should_fail/T18851.hs - + testsuite/tests/typecheck/should_fail/T26255a.hs - + testsuite/tests/typecheck/should_fail/T26255a.stderr - + testsuite/tests/typecheck/should_fail/T26255b.hs - + testsuite/tests/typecheck/should_fail/T26255b.stderr - + testsuite/tests/typecheck/should_fail/T26255c.hs - + testsuite/tests/typecheck/should_fail/T26255c.stderr - testsuite/tests/typecheck/should_fail/UnliftedNewtypesFamilyKindFail2.stderr - testsuite/tests/typecheck/should_fail/all.T - utils/haddock/haddock-api/src/Haddock/Convert.hs The diff was not included because it is too large. View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/30d3c77f2393e8b749194b1f5352c9f... -- View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/30d3c77f2393e8b749194b1f5352c9f... You're receiving this email because of your account on gitlab.haskell.org.