[Git][ghc/ghc][wip/fendor/remove-stg_stackDecode] 17 commits: level imports: Check the level of exported identifiers

Hannes Siebenhandl pushed to branch wip/fendor/remove-stg_stackDecode at Glasgow Haskell Compiler / GHC Commits: 246b7853 by Matthew Pickering at 2025-08-07T06:58:30-04:00 level imports: Check the level of exported identifiers The level imports specification states that exported identifiers have to be at level 0. This patch adds the requird level checks that all explicitly mentioned identifiers occur at level 0. For implicit export specifications (T(..) and module B), only level 0 identifiers are selected for re-export. ghc-proposal: https://github.com/ghc-proposals/ghc-proposals/pull/705 Fixes #26090 - - - - - 358bc4fc by fendor at 2025-08-07T06:59:12-04:00 Bump GHC on darwin CI to 9.10.1 - - - - - 1903ae35 by Matthew Pickering at 2025-08-07T12:21:10+01:00 ipe: Place strings and metadata into specific .ipe section By placing the .ipe metadata into a specific section it can be stripped from the final binary if desired. ``` objcopy --remove-section .ipe <binary> upx <binary> ``` Towards #21766 - - - - - c80dd91c by Matthew Pickering at 2025-08-07T12:22:42+01:00 ipe: Place magic word at the start of entries in the .ipe section The magic word "IPE\nIPE\n" is placed at the start of .ipe sections, then if the section is stripped, we can check whether the section starts with the magic word or not to determine whether there is metadata present or not. Towards #21766 - - - - - cab42666 by Matthew Pickering at 2025-08-07T12:22:42+01:00 ipe: Use stable IDs for IPE entries IPEs have historically been indexed and reported by their address. This makes it impossible to compare profiles between runs, since the addresses may change (due to ASLR) and also makes it tricky to separate out the IPE map from the binary. This small patch adds a stable identifier for each IPE entry. The stable identifier is a single 64 bit word. The high-bits are a per-module identifier and the low bits identify which entry in each module. 1. When a node is added into the IPE buffer it is assigned a unique identifier from an incrementing global counter. 2. Each entry already has an index by it's position in the `IpeBufferListNode`. The two are combined together by the `IPE_ENTRY_KEY` macro. Info table profiling uses the stable identifier rather than the address of the info table. The benefits of this change are: * Profiles from different runs can be easily compared * The metadata can be extracted from the binary (via the eventlog for example) and then stripped from the executable. Fixes #21766 - - - - - 2860a9a5 by Simon Peyton Jones at 2025-08-07T20:29:18-04:00 In TcSShortCut, typechecker plugins should get empty Givens Solving in TcShortCut mode means /ignoring the Givens/. So we should not pass them to typechecker plugins! Fixes #26258. This is a fixup to the earlier MR: commit 1bd12371feacc52394a0e660ef9349f9e8ee1c06 Author: Simon Peyton Jones Date: Mon Jul 21 10:04:49 2025 +0100 Improve treatment of SPECIALISE pragmas -- again! - - - - - 2157db2d by sterni at 2025-08-08T15:32:39-04:00 hadrian: enable terminfo if --with-curses-* flags are given The GHC make build system used to support WITH_TERMINFO in ghc.mk which allowed controlling whether to build GHC with terminfo or not. hadrian has replaced this with a system where this is effectively controlled by the cross-compiling setting (the default WITH_TERMINFO value was bassed on CrossCompiling, iirc). This behavior is undesireable in some cases and there is not really a good way to work around it. Especially for downstream packagers, modifying this via UserSettings is not really feasible since such a source file has to be kept in sync with Settings/Default.hs manually since it can't import Settings.Default or any predefined Flavour definitions. To avoid having to add a new setting to cfg/system.config and/or a new configure flag (though I'm happy to implement both if required), I've chosen to take --with-curses-* being set explicitly as an indication that the user wants to have terminfo enabled. This would work for Nixpkgs which sets these flags [1] as well as haskell.nix [2] (which goes to some extreme measures [3] [4] to force terminfo in all scenarios). In general, I'm an advocate for making the GHC build be the same for native and cross insofar it is possible since it makes packaging GHC and Haskell related things while still supporting cross much less compilicated. A more minimal GHC with reduced dependencies should probably be a specific flavor, not the default. Partially addresses #26288 by forcing terminfo to be built if the user explicitly passes configure flags related to it. However, it isn't built by default when cross-compiling yet nor is there an explicit way to control the package being built. [1]: https://github.com/NixOS/nixpkgs/blob/3a7266fcefcb9ce353df49ba3f292d06443760... [2]: https://github.com/input-output-hk/haskell.nix/blob/6eaafcdf04bab7be745d1aa4... [3]: https://github.com/input-output-hk/haskell.nix/blob/6eaafcdf04bab7be745d1aa4... [4]: https://github.com/input-output-hk/haskell.nix/blob/6eaafcdf04bab7be745d1aa4... - - - - - b3c31488 by David Feuer at 2025-08-08T15:33:21-04:00 Add default QuasiQuoters Add `defaultQuasiQuoter` and `namedDefaultQuasiQuoter` to make it easier to write `QuasiQuoters` that give helpful error messages when they're used in inappropriate contexts. Closes #24434. - - - - - 03555ed8 by Sylvain Henry at 2025-08-10T22:20:57-04:00 Handle non-fractional CmmFloats in Cmm's CBE (#26229) Since f8d9d016305be355f518c141f6c6d4826f2de9a2, toRational for Float and Double converts float's infinity and NaN into Rational's infinity and NaN (respectively 1%0 and 0%0). Cmm CommonBlockEliminator hashing function needs to take these values into account as they can appear as literals now. See added testcase. - - - - - 6c956af3 by J. Ryan Stinnett at 2025-08-10T22:21:42-04:00 Fix extensions list in `DoAndIfThenElse` docs - - - - - 6dc420b1 by J. Ryan Stinnett at 2025-08-10T22:21:42-04:00 Document status of `RelaxedPolyRec` extension This adds a brief extension page explaining the status of the `RelaxedPolyRec` extension. The behaviour of this mode is already explained elsewhere, so this page is mainly for completeness so that various lists of extensions have somewhere to point to for this flag. Fixes #18630 - - - - - 18036d52 by Simon Peyton Jones at 2025-08-11T11:31:20-04:00 Take more care in zonkEqTypes on AppTy/AppTy This patch fixes #26256. See Note [zonkEqTypes and the PKTI] in GHC.Tc.Solver.Equality - - - - - c8d76a29 by Zubin Duggal at 2025-08-11T11:32:02-04:00 ci: upgrade bootstrap compiler on windows to 9.10.1 - - - - - d0e76dfa by fendor at 2025-08-12T08:53:59+00:00 Move stack decoding logic from ghc-heap to ghc-internal The stack decoding logic in `ghc-heap` is more sophisticated than the one currently employed in `CloneStack`. We want to use the stack decoding implementation from `ghc-heap` in `base`. We cannot simply depend on `ghc-heap` in `base` due do bootstrapping issues. Thus, we move the code that is necessary to implement stack decoding to `ghc-internal`. This is the right location, as we don't want to add a new API to `base`. Moving the stack decoding logic and re-exposing it in ghc-heap is insufficient, though, as we have a dependency cycle between. * ghc-heap depends on stage1:ghc-internal * stage0:ghc depends on stage0:ghc-heap To fix this, we remove ghc-heap from the set of `stage0` dependencies. This is not entirely straight-forward, as a couple of boot dependencies, such as `ghci` depend on `ghc-heap`. Luckily, the boot compiler of GHC is now >=9.10, so we can migrate `ghci` to use `ghc-internal` instead of `ghc-heap`, which already exports the relevant modules. However, we cannot 100% remove ghc's dependency on `ghc-heap`, since when we compile `stage0:ghc`, `stage1:ghc-internal` is not yet available. Thus, when we compile with the boot-compiler, we still depend on an older version of `ghc-heap`, and only use the modules from `ghc-internal`, if the `ghc-internal` version is recent enough. ------------------------- Metric Increase: size_hello_artifact size_hello_artifact_gzip size_hello_unicode size_hello_unicode_gzip ------------------------- These metric increases are unfortunate, they are most likely caused by the larger (literally in terms of lines of code) stack decoder implementation that are now linked into hello-word binaries. On linux, it is almost a 10% increase, which is considerable. - - - - - 4804c960 by fendor at 2025-08-12T08:53:59+00:00 Implement `decode` in terms of `decodeStackWithIpe` Uses the more efficient stack decoder implementation. - - - - - 5b283ebd by fendor at 2025-08-12T08:53:59+00:00 Remove stg_decodeStackzh - - - - - 4e0fbdca by fendor at 2025-08-12T08:53:59+00:00 Remove ghcHeap from list of toolTargets - - - - - 97 changed files: - .gitlab/darwin/toolchain.nix - .gitlab/generate-ci/gen_ci.hs - .gitlab/jobs.yaml - compiler/GHC/ByteCode/Types.hs - compiler/GHC/Cmm.hs - compiler/GHC/Cmm/CommonBlockElim.hs - compiler/GHC/CmmToAsm/PPC/Ppr.hs - compiler/GHC/CmmToAsm/Ppr.hs - compiler/GHC/CmmToLlvm/Data.hs - compiler/GHC/Runtime/Heap/Inspect.hs - compiler/GHC/Runtime/Interpreter.hs - compiler/GHC/StgToCmm/InfoTableProv.hs - compiler/GHC/Tc/Gen/Export.hs - compiler/GHC/Tc/Solver/Dict.hs - compiler/GHC/Tc/Solver/Equality.hs - compiler/GHC/Tc/Solver/Monad.hs - compiler/GHC/Tc/Solver/Solve.hs - compiler/GHC/Types/Name/Reader.hs - compiler/ghc.cabal.in - docs/users_guide/conf.py - docs/users_guide/debug-info.rst - docs/users_guide/expected-undocumented-flags.txt - docs/users_guide/exts/doandifthenelse.rst - + docs/users_guide/exts/relaxed_poly_rec.rst - docs/users_guide/exts/types.rst - hadrian/src/Rules/ToolArgs.hs - hadrian/src/Settings/Default.hs - hadrian/src/Settings/Packages.hs - libraries/base/src/GHC/Stack/CloneStack.hs - + libraries/ghc-experimental/src/GHC/Stack/Annotation/Experimental.hs - libraries/ghc-heap/GHC/Exts/Heap/ClosureTypes.hs - libraries/ghc-heap/GHC/Exts/Heap/Closures.hs - libraries/ghc-heap/GHC/Exts/Heap/Constants.hsc - libraries/ghc-heap/GHC/Exts/Heap/InfoTable.hsc - libraries/ghc-heap/GHC/Exts/Heap/InfoTable/Types.hsc - libraries/ghc-heap/GHC/Exts/Heap/InfoTableProf.hsc - libraries/ghc-heap/GHC/Exts/Heap/ProfInfo/Types.hs - libraries/ghc-heap/GHC/Exts/Stack/Constants.hsc - libraries/ghc-heap/GHC/Exts/Stack/Decode.hs - libraries/ghc-heap/ghc-heap.cabal.in - libraries/ghc-heap/cbits/HeapPrim.cmm → libraries/ghc-internal/cbits/HeapPrim.cmm - libraries/ghc-heap/cbits/Stack.cmm → libraries/ghc-internal/cbits/Stack.cmm - libraries/ghc-internal/cbits/StackCloningDecoding.cmm - libraries/ghc-heap/cbits/Stack_c.c → libraries/ghc-internal/cbits/Stack_c.c - libraries/ghc-internal/ghc-internal.cabal.in - libraries/ghc-internal/jsbits/base.js - libraries/ghc-internal/src/GHC/Internal/Exception/Backtrace.hs - + libraries/ghc-internal/src/GHC/Internal/Heap/Closures.hs - + libraries/ghc-internal/src/GHC/Internal/Heap/Constants.hsc - + libraries/ghc-internal/src/GHC/Internal/Heap/InfoTable.hsc - + libraries/ghc-internal/src/GHC/Internal/Heap/InfoTable/Types.hsc - + libraries/ghc-internal/src/GHC/Internal/Heap/InfoTableProf.hsc - + libraries/ghc-internal/src/GHC/Internal/Heap/ProfInfo/Types.hs - libraries/ghc-internal/src/GHC/Internal/Stack/CloneStack.hs - + libraries/ghc-internal/src/GHC/Internal/Stack/Constants.hsc - + libraries/ghc-internal/src/GHC/Internal/Stack/Decode.hs - libraries/ghc-internal/src/GHC/Internal/TH/Quote.hs - libraries/ghci/GHCi/Message.hs - libraries/ghci/ghci.cabal.in - libraries/template-haskell/Language/Haskell/TH/Quote.hs - libraries/template-haskell/changelog.md - rts/CloneStack.c - rts/CloneStack.h - rts/IPE.c - rts/ProfHeap.c - rts/RtsSymbols.c - rts/eventlog/EventLog.c - rts/include/rts/IPE.h - testsuite/tests/interface-stability/base-exports.stdout - testsuite/tests/interface-stability/base-exports.stdout-javascript-unknown-ghcjs - testsuite/tests/interface-stability/base-exports.stdout-mingw32 - testsuite/tests/interface-stability/base-exports.stdout-ws-32 - testsuite/tests/interface-stability/template-haskell-exports.stdout - + testsuite/tests/numeric/should_compile/T26229.hs - testsuite/tests/numeric/should_compile/all.T - + testsuite/tests/partial-sigs/should_compile/T26256.hs - + testsuite/tests/partial-sigs/should_compile/T26256.stderr - testsuite/tests/partial-sigs/should_compile/all.T - testsuite/tests/rts/ipe/ipeMap.c - testsuite/tests/rts/ipe/ipe_lib.c - + testsuite/tests/splice-imports/DodgyLevelExport.hs - + testsuite/tests/splice-imports/DodgyLevelExport.stderr - + testsuite/tests/splice-imports/DodgyLevelExportA.hs - + testsuite/tests/splice-imports/LevelImportExports.hs - + testsuite/tests/splice-imports/LevelImportExports.stdout - + testsuite/tests/splice-imports/LevelImportExportsA.hs - testsuite/tests/splice-imports/Makefile - + testsuite/tests/splice-imports/ModuleExport.hs - + testsuite/tests/splice-imports/ModuleExport.stderr - + testsuite/tests/splice-imports/ModuleExportA.hs - + testsuite/tests/splice-imports/ModuleExportB.hs - + testsuite/tests/splice-imports/T26090.hs - + testsuite/tests/splice-imports/T26090.stderr - + testsuite/tests/splice-imports/T26090A.hs - testsuite/tests/splice-imports/all.T - + testsuite/tests/typecheck/should_compile/T26256a.hs - testsuite/tests/typecheck/should_compile/all.T The diff was not included because it is too large. View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/41f46ffa9c2bcec0475d6611a70a580... -- View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/41f46ffa9c2bcec0475d6611a70a580... You're receiving this email because of your account on gitlab.haskell.org.