sheaf pushed to branch wip/romes/27514 at Glasgow Haskell Compiler / GHC Commits: b5d29ab8 by Brandon Chinn at 2026-08-25T18:42:08-04:00 Add Data.RealFloat and Infinity/NegInfinity/NaN pattern synonyms (#26961) - - - - - e60eb3bc by Andreas Klebinger at 2026-08-25T18:42:59-04:00 rts linker: Fix pointer arithmetic issue in flushInstructionCacheRISCV64 We accidentally operated over `uint64_t*` when we should use `uint8_t`. Fixes #27569 - - - - - e9bbe8f9 by Andreas Klebinger at 2026-08-26T15:09:23-04:00 cmm dumps: Add machop width info with -dppr-debug for infix ops. - - - - - 86e3a9d8 by Andreas Klebinger at 2026-08-26T15:09:24-04:00 CmmLint: Check for unsupported MachOp widths machOpArgReps now maps MachOp + Width to a list of supported argument widths or Nothing if the given operation is not supported at the given width. This allows us to check for nonsensical combinations like FloatToInt at Word16. Similarly we now check that every address is actually wordwidth. - - - - - 13781cca by Andreas Klebinger at 2026-08-26T15:09:24-04:00 arm64 ncg: The big subword truncation fix. A set of slightly related fixes to arm subword handling: Bitmask immediates: Don't produce overflowing assembly literals. There is still another bug here that causes us to miss some valid literals but we will fix that later. Improve subword truncation handling: We now use a small set of helpers to truncate `Register` values rather than truncating immediate `Reg` values which greatly simplifies the code structure. This fixes a great many bugs to do with sign/zero extending subwords or the lack thereof. We now establish the invariant that subword values are zero-extended at every site at which they come into "scope" of the ncg, and rely on the invariant throughout rather than pessimistically inserting redundant extensions in a hodgepodge manner at the use sites of these values. This fixes at least the bugs described in issues #27533, #27430 #27537, #27538, #27539, and #27550. But likely more bugs yet not found. Subword ffi results: Apply truncations when calling functions returning subword values. genCondJump: Don't sign extend signed values in the input register as it might map to a local variable, corrupting the value stored within. Fix subword store/load instructions.: We used to read those at 32bit width even for smaller values possibly resulting in invalid memory access. Now we construct the suffix for subword variants based on the instruction format for these. - - - - - d8fa5d7c by Andreas Klebinger at 2026-08-26T15:09:24-04:00 arm64 ncg: Fix MO_V_Broadcast for non-literals. We now use OpReg instead of OpScalarAsVec as required since we broadcast a gp register. Also adds a test. Fixes #27565. - - - - - 94822c95 by Andreas Klebinger at 2026-08-26T15:09:24-04:00 Add some test cases covering bugs in the arm ncg. * Test for #27430 (subword ffi results) * #27537 - subword conversions * #27538 - subwords used in conditional * #27533 - single byte read - - - - - dd1ba88a by Andreas Klebinger at 2026-08-26T15:09:24-04:00 cmmLint: Lint against MO_FS_Truncate subword use. - - - - - fd22f71e by Zubin Duggal at 2026-08-26T15:10:20-04:00 ghc-internal: annotateSTM should use catchSTM# rather than catch# A catch# frame inside a transaction breaks retry and async exception delivery. Fixes #27657 - - - - - bb324171 by Rodrigo Mesquita at 2026-08-26T15:10:59-04:00 rts: refactor to reduce THREADED_RTS in MSG_UPD_TSO_FLAGS - No behavior change in this commit (well, a small optimization here makes us do less work if the target TSO owned by the curr. capability) - Move all THREADED_RTS CPP needed into `updThreadFlag` - Merge MSG_SET_TSO_FLAGS and MSG_UNSET_TSO_FLAGS into MSG_UPD_TSO_FLAGS plus a `set` bool field in the MessageUpdTSOFlag struct Towards #27729 - - - - - ed99b7b7 by Rodrigo Mesquita at 2026-08-26T15:10:59-04:00 rts: Fix race condition in MSG_UPD_TSO_FLAGS execution The code for processing the MSG_UPD_TSO_FLAGS message was not taking into consideration that the TSO's owner might have moved in between that capability receiving the message (since it was its previous owner) and starting to process its inbox (a point at which it was no longer the owner) Added Note [TSO owner may change in between Msg being sent and received] to explain this race and the pattern used to fix this, where we just forward the message to the new owner. Fixes #27729 - - - - - cd653714 by Alan Zimmerman at 2026-08-26T15:11:49-04:00 EPA: Uses Parsers.parseModule for exactprint tests Parsers.parseModule is the advertised way to parse for use for exact printing in the ghc-exactprint library. This commit updates the GHC exact print testing to use it. This requires moving the comment balancing that was occurring only in the test path into the advertising parser path, so it moves from Transforms.hs to Utils.hs. Also update the comment adding to honour trailing annotations - - - - - d1d01fa5 by Wolfgang Jeltsch at 2026-08-27T13:17:59+03:00 Add `rethrowSTM` and improve STM-related documentation Adding `rethrowSTM` resolves #26758. The implementation of `rethrowSTM` is completely analogous to the one of `rethrowIO`. The following is established for the documentation of `throwSTM` and `catchSTM`: * Both operations are directly described as analogs of their `IO` counterparts. * There is no reference to `throw` in the documentation of `throwSTM`, because, although such a reference is great in the documentation of `throwIO`, it is somewhat out of place in the documentation of `throwSTM`. * Instead of repeating part of `throwIO`’s documentation, the documentation of `throwSTM` just recommends using `throwSTM` instead of `throw` and references the corresponding arguments in the documentation of `throwIO`. - - - - - 06fde293 by fendor at 2026-08-28T06:06:44-04:00 GHCi: Fix order of `PackageDBFlag`s for interactive home unit `PackageDBFlag`s are stored in reverse order of cli specification. When sorting the `PackageDBFlag`s by longest common prefix, we need thus to reverse the package db stacks before calculating the prefix. We make sure to reverse the package db stack for the interactive home unit to uphold that later specified package dbs overwrite earlier ones. Resolved and adds regression test for #27640 - - - - - 024c4d04 by fendor at 2026-08-28T06:07:23-04:00 Reuse the UnitIndexCache after initialising multiple home units - - - - - 55326fa0 by Alan Zimmerman at 2026-08-28T06:08:03-04:00 EPA: Some Haddock processing tweaks These changes to the Haddock postprocessing should not change behaviour, but just bring it more closely in line with the original, changed at 44309cd377f And add some haddock exactprint tests to show they work. - - - - - b3ddee95 by Andreas Klebinger at 2026-08-28T13:57:46-04:00 hadrian: Deprecate quickest flavour. It was more of a trap for new users than actually beneficial so we deprecate it and suggest quick+no_dynamic_libs to users instead. - - - - - a1d81390 by Andreas Klebinger at 2026-08-28T13:58:37-04:00 cmm: Always favour entry block during block deduplication. We now always keep the first block in the CmmGraph. This way we avoid the need to update the entry info table. Failing to do so caused #27722. Fixes #27722. - - - - - 5bd65f00 by Andreas Klebinger at 2026-08-28T13:59:16-04:00 test: FamAppCachePerf - Only collect bytes allocated. Fixes 27747 - - - - - ced53ce6 by mangoiv at 2026-08-29T07:15:24-04:00 nightlies: output yaml to file only Previously we would just output the metadata to stdout which risks that it's clobbered by incidental debugt output. We now output to file only. Fixes #27511 - - - - - 578bd185 by Andreas Klebinger at 2026-08-29T07:16:05-04:00 Specialise: Stop looping on recursive dictionaries in interestingDict interestingDict now doesn't look through loopbreaker unfoldings. Doing so would cause infinite loops on certain dictionaries. Fixes #27705. - - - - - 7bf546fc by Simon Peyton Jones at 2026-08-31T23:48:53-04:00 Never make an absent filler for a constraint type mkAbsentFiller used isTerminatingType to decide, but that is not enough. Consider class Eq a => UC a where {} let u :: UC Int -- UC Int is a "non-terminating type" u = error "Absent" let e :: Eq Int -- Eq Int is a "terminating type" e = $p1UC u We clearly must not make a filler for `e`, because we speculatively evaluate it. But speculatively evaluating `e` forces `u`, so we must not make one for `u` either. Asking isDictTy instead is not enough either, because it does not catch a constraint hidden behind an unreduced type family application: type family F a :: Constraint type instance F W = TC W a :: F W => Int -> Int -- (F W) argument is absent Oops! Entered absent arg Arg: irred Type: F W So play safe and use isPredTy: never make an absent filler for any constraint-kinded type. Fixes #27627 - - - - - 5f474953 by Zubin Duggal at 2026-08-31T23:48:53-04:00 Add tests for absent fillers at dictionary types T27627 a unary class whose superclass is a non-unary class T27627a ...whose superclass is a Constraint-kinded type family T27627b ...whose superclass is a quantified constraint T27627c a unary class applied to itself, (UC (UC (TC a))) T27627e a (forall b. P b) dictionary that loops - - - - - cd5c6bcc by Zubin Duggal at 2026-08-31T23:48:53-04:00 An abstract TyCon may hide a unary class A class declared in an hs-boot file is an AbstractTyCon inside the module loop, and compiling the real declaration may reveal it to be a UnaryClassTyCon. - isTerminatingType returned True for such AbstractTyCons - IfaceToCore set the unary flag to False in the DFunId So we could end up speculating bottom dictionaries because inside a module loop we see an UnaryClassTyCon as an AbstractTyCon Use isTerminatingTyCon, which returns False for an abstract TyCon. The Bool in DFunId is now a cache for isTerminatingTyCon, set in mkDFunIdDetails. Fixes #27704 - - - - - abfc224a by Zubin Duggal at 2026-08-31T23:48:53-04:00 Specialise: don't replace dead args with absent fillers specHeader decides an argument is dead by calling isDeadBinder on a binder of the /optimised RHS/, then applies the filler to the /stable unfolding/ template instead. The two may differ, so the argument can be dead in the RHS and not in the template. The specialised function's unfolding then has an absent filler, and any call site that inlines it evaluates the error thunk. Dropping dead args in the specialiser is rarely worth it, to quote Simon, "The later worker/wrapper pass will pick up the dead arg later if it is really dead. Keeps the specialiser simpler." So instead of trying to check if the arg really is dead in the stable unfolding, just drop the logic for dropping dead args in the specialiser altogeher. Fixes #27703 - - - - - 1557fd1c by Zubin Duggal at 2026-08-31T23:48:53-04:00 CorePrep: don't speculate a call across an hs-boot edge We take care not to evaluate things that might be bottom, like a looping dictionary group, but our analysis is defeated by boot files. We only track recursion within a module, so two dictionaries that depend on each other across a module loop each look non-recursive, and we might speculate them. Any recursion we cannot see must cross an hs-boot edge, so refuse to speculate calls that cross one. Fixes #27717 - - - - - 4117e5ae by Wolfgang Jeltsch at 2026-08-31T23:49:35-04:00 Incorporate the `rethrowSTM` reexport into the `stm` submodule - - - - - 4bfbf5c8 by ARATA Mizuki at 2026-09-01T18:55:08-04:00 testsuite: Fix out-of-bounds access in T3586 unsafeRead and unsafeWrite use 0-based index. Looking at #3586, the expected output seems to be 2.8e8. Addresses #27596 - - - - - 3f9db6d4 by ARATA Mizuki at 2026-09-01T18:55:08-04:00 testsuite: Fix out-of-bounds access in T21305 writeInt64Array# takes an index measured in units of Int64 elements. Fixes #27596 - - - - - 44d7788f by Simon Peyton Jones at 2026-09-01T18:55:53-04:00 Fix buglet in INLINE-arity calculation for pattern synonyms This fixes #27744. The buglet was accidentally introduced by commit 3a0f9a51c1dacc474c7fd128082edd8bf4081256 Author: Simon Peyton Jones <simon.peytonjones@gmail.com> Date: Sat Aug 1 00:13:02 2026 +0100 Fix three bugs related to required type args and INLINE pragmas I failed to find all the calls to `addInlinePragArity`! - - - - - df058f1d by Simon Jakobi at 2026-09-02T07:18:06-04:00 testsuite: Migrate perf tests off collect_compiler_stats('all') The 'all' metric argument applies a single tolerance to bytes allocated, max_bytes_used and peak_megabytes_allocated, although their noise profiles are incompatible (#27653): allocations are nearly deterministic, residency needs 10-20%, and peak is quantized to 1 MB. Any single tolerance is too tight for one metric or too slack for another. This migrates the remaining users of 'all' (and of the 'all' default) to explicit per-metric collection, ahead of removing 'all' from the driver. peak_megabytes_allocated is dropped everywhere: its 1 MB granularity makes tight relative windows meaningless (#27613), and it is sensitive to GC timing. In #27489 it drifted by -5.3% while max_bytes_used moved by less than 0.1%. Where a test guards a memory property, max_bytes_used covers it at byte granularity. Where the motivating ticket was about compile-time memory (T11545, T15304, T26425), residency remains gated via max_bytes_used, now with a residency-appropriate tolerance. max_bytes_used is dropped where residency was only ever an accident of 'all': * T15630, T15630a, T20261: the underlying tickets (#15630, #20261) contain no memory data at all. One is a simplifier-ticks blowup and the other is stated entirely in allocation numbers, so the 20% window never had teeth. * T21839c: #21839's measurements show residency essentially flat (+0.16%) while allocations moved +7%, so allocations are the discriminating metric. They are already gated at 1% via collect_compiler_runtime. The ghc/max gate had previously broken CI spuriously (9fd11585eb widened it from 1% to 10% for that reason). Allocation tolerances are tightened to the testsuite's conventional 2% where 'all' previously left them at 10-20%. Assisted-by: Claude Fable 5 - - - - - 72dd2432 by Simon Jakobi at 2026-09-02T07:18:06-04:00 testsuite: Remove the 'all' metric argument of collect_stats 'all' gated bytes allocated, max_bytes_used and peak_megabytes_allocated at a single tolerance, although their noise profiles are incompatible, making such tests either flaky or toothless (#27653). Closes #27653. Assisted-by: Claude Fable 5 - - - - - 2228cb30 by Simon Jakobi at 2026-09-02T07:18:06-04:00 testsuite: Make the deviation argument of collect_stats mandatory Almost every caller passes an explicit tolerance matched to the metric's noise profile, and the silent 20% default is far slacker than 'bytes allocated' merits. Only two tests relied on it. They now state their tolerance explicitly: large-project gets 10%, in line with other large compile-time tests. T9848 gets 2%: its metric is byte-for-byte deterministic across CI jobs and platforms of a given test_env, has drifted only about 2.5% since 2015, and the fusion failure it guards against would show up as a roughly +30000% jump. Assisted-by: Claude Fable 5 - - - - - 56291fc5 by Cheng Shao at 2026-09-02T07:18:45-04:00 autoconf/ghc-toolchain: bump llvm upper bound to support llvm 23 This commit bumps llvm upper bound to support llvm 23. - - - - - 20eb3f41 by Cheng Shao at 2026-09-02T07:18:45-04:00 rts: fix compilation issues with clang 23 clang 23 has broadened `-Wall`/`-Wextra` ranges, exposing some minor issues in the rts when building with validate flavours: - Unused locals - `#pragma GCC diagnostic pop` mismatch This commit fixes those. - - - - - 9e7739ab by Simon Jakobi at 2026-09-03T13:45:43-04:00 Add -Wimplicit-field-strictness (#16836) This opt-in warning fires when a data constructor field lacks an explicit strictness annotation (`!` or `~`). It complements the LazyFieldAnnotations extension (4762a8bf30f) from GHC proposal 752, which makes `~` annotations available for this purpose. Deciding which fields to report requires their levity, so the check runs after typechecking. To keep the noise down, the diagnostic is emitted once per data declaration, grouped by constructor. Closes #16836. Assisted-by: Claude Fable 5 - - - - - 6a44d591 by mangoiv at 2026-09-03T13:46:22-04:00 simplifier: remove a bogus `assert` in `rebuild_app'` in `GHC.CoreToStg.Prep.cpeApp`. Prior to this commit commit 08bc245be70d95801bc1138804ed1de9474fbdc0 Author: sheaf <sam.derbyshire@gmail.com> Date: Sat Feb 28 16:30:43 2026 +0100 Clean up join points, casts & ticks This commit shores up the logic dealing with casts and ticks occurring in between a join point binding and a jump any `PlaceRuntime` ticks we observed were profiling ticks, even though that isn't necessary. The more liberal rules in the above commit allow e.g. breakpoint ticks (which are valid PlaceRuntime ticks) to legitimately appear in an argument position. Fixes #27556 - - - - - eaa95a6f by Andrei Borzenkov at 2026-09-04T08:08:40-04:00 Parentheses in prefix GADT constructors (#27423) Updated `splitLHsGadtTy` to allow looking through the parentheses for inner binders. General example of a code pattern that's allowed now: data S a where MkS :: (forall a. S a) That should work now with any combination of nested foralls and parentheses. We don't perform parenthesis unwrapping for record GADT constructors in accordance with GHC Proposal #402. To this end `con_inner_bndrs` no longer stores plain forall telescopes: `[HsForAllTelescope pass]` is replaced with `[LHsGadtTelescope pass]`, a new `HsArg`-style type whose `HsGadtForAll` holds an inner telescope and whose `HsGadtPar` holds a pair of parentheses. The parentheses carry no meaning for renaming or type checking; the only reason to record them is exact-printing. Updated `pprConDecl` to improve the `parse == parse . ppr . parse` property of GADT pretty-printing. The pretty printer can now output code that's similar to this: data T a where MkT1 :: (forall a. T a) MkT2 :: forall . forall a. T a These are special cases of inner forall binders for prefix GADT constructors, when we have either implicit or zero explicit outer binders. - - - - - 639456a8 by Evgeny Malyshev at 2026-09-04T08:09:25-04:00 HsPat: Add spacing to unary tuple patterns Use hsep when printing unary boxed TuplePat applications so that the MkSolo constructor is separated from its argument. The old hcat rendered wildcard and parenthesized arguments as MkSolo_ and MkSolo(). Add T27034 to exercise the HsPat splice-dump path with wildcard and variable arguments, and update existing affected golden output. Fixes #27034 Assisted-By: OpenAI Codex - - - - - 2908ab36 by Simon Jakobi at 2026-09-05T07:22:17-04:00 X86 NCG: use btr/bts/btc for single-bit operations Previously the Cmm patterns x & ~(1 << i) x | (1 << i) x ^ (1 << i) compiled to mov/shl/not/and-style sequences of 3-4 instructions. Now they compile to a single btr, bts or btc, matching what C compilers produce. When the bit index is a literal, constant folding has already collapsed these patterns into ones with a literal mask, such as x & 0xfffffeffffffffff for x & ~(1 << 40). Such masks are now also compiled to a bit-test instruction when they don't fit in an imm32 and would otherwise have to be loaded into a register first. For a variable bit index, this applies only when the shift is unchecked (uncheckedShiftL#, Data.Bits.unsafeShiftL): the bounds-checked shiftL used by e.g. the default clearBit/setBit/complementBit implementations wraps the shift in a bounds mask that this optimisation does not see through. With a literal index, the bounds mask is constant-folded away, so the checked operations benefit too. See Note [Bit-test instructions] in GHC.CmmToAsm.X86.CodeGen. Fixes #25233. Assisted-by: Claude Fable 5 - - - - - c673ecf0 by Simon Peyton Jones at 2026-09-05T07:22:59-04:00 Move HsStatic free-var test to typechecker A `static` form should have no free *term* variables, but it can have free *type* variables. Alas, the renamer does not really know what is a term variable and what is a type variable, because of required type arguments. This patch moves the test to the typechecker, which does know. Addresses #27664 - - - - - 5939ceaf by sheaf at 2026-09-05T22:06:18-04:00 Windows: enforce path convention in ./configure As detailed in Note [MSYS paths] in Hadrian.Utilities, the standing convention (using Windows-style paths with forward slashes) is now enforced in ./configure instead of within Hadrian, removing the need for 'cygpath' calls within Hadrian. Fixes #26683 - - - - - a6061455 by sheaf at 2026-09-05T22:06:18-04:00 Hadrian: introduce ExeSpawnPath Specific details about the filepath used to specify the executable to spawn with CreateProcess matters on Windows: whether we use forward or backward slashes, a leading ./, or an absolute path changes how the executable is found. This commit introduces 'ExeSpawnPath' which is a path that is guaranteed to be found when spawning a process. All command invocations now go through this type to ensure the path has been properly sanitised. See Note [NeedCurrentDirectoryForExePath] in Hadrian.Utilities. The same treatment is applied to hsc2hs. Updates hsc2hs submodule. - - - - - e28313e3 by sheaf at 2026-09-05T22:07:06-04:00 Preserve tick ordering in 'tickTickedExpr' 'GHC.Core.Utils.tickTickedExpr' tries to combine a tick 't1' into an existing stack of ticks 't2s'. There are two situations: 1. 't1' is subsumed by a tick in 't2s': drop it. 2. A tick in 't2s' is subsumed by 't1', say 't2'. This commit ensures that in case (2) we keep 't1' on the outside instead of replacing 't2' at its position in the stack. This avoids re-ordering source notes (which was the cause of #27749). This fixes a regression introduced in 2dadf3b0d05. Fixes #27749 - - - - - 3172f557 by sheaf at 2026-09-05T22:07:06-04:00 Consistently prefer local source note ticks GHC.Cmm.DebugBlock.cmmDebugGen (DWARF annotations) and GHC.Stg.Debug.quickSourcePos (-finfo-table-map) both contained logic to prioritise source note ticks from the current module. This commit commons up this logic and propagates it to a third consumer: IPE stack frames, in GHC.Driver.GenerateCgIPEStub. See the new function GHC.Types.Tickish.bestSourceNote. - - - - - 192be0b6 by Luite Stegeman at 2026-09-07T19:43:36-04:00 rts: fix ctoi_tuple_spill_words getting out of sync Fix a few places that were not updating ctoi_tuple_spill_words correctly, leading to corruption/crashes when dealing with large unboxed tuples in bytecode: - captureContinuationAndAbort - findRetryFrameHelper/findAtomicallyFrameHelper - interpretBCO bci_BRK_FUN fixes #27633 - - - - - 604eb43c by Simon Jakobi at 2026-09-07T19:44:15-04:00 Hadrian: don't capture the testsuite driver's output (#27780) a6061455d54 switched the Testsuite RunTest case from Shake's cmd to the cmd' wrapper. cmd' always captures stdout and stderr, and since the caller asks for Exit, it returns without dumping what it captured. As a result the testsuite output no longer appears in CI job logs: failures, performance metrics and the summary were lost with the job. Use cmdExe, the uncaptured cmd, as the other plain-cmd sites in that commit do. Fixes #27780. Assisted-by: Claude Fable 5.1 - - - - - 06eee015 by Luite Stegeman at 2026-09-08T06:03:06+02:00 rts: Fix missing memory barrier in eval_thunk_selector (#27477) unchain_thunk_selectors() was missing an ACQUIRE_LOAD for the indirectee, leading to segfaults and corruption during GC on weakly-ordered architectures. Fixes #27477 - - - - - f8b2bd8f by Alan Zimmerman at 2026-09-08T09:39:12-04:00 EPA Fix HsCmdDo exact print with comments Exact printing of HsCmdDo was ignoring the location for the do statements, and this is an annotation that can have comments in it. Update it so we print the statements as a unit, including any comments. Also add the result of auditing that we capture comments in all needed places, noting that the remaining Anno SrcSpan instances are benign. - - - - - 430967ab by Duncan Coutts at 2026-09-09T11:07:01+01:00 Reorder cmm decls in HeapStackCheck for a better logical grouping And put more section headers in to deliniate the groups. We're about to add more here, so better to organise it first. - - - - - 344080fd by Duncan Coutts at 2026-09-09T11:07:01+01:00 Add raisePrimIOException and add it to RTS<->ghc-internal API The raisePrimIOException is a new helper function that I/O primops will use to help them report I/O errors. This is implemented in Haskell (since that's a lot easier), but has a calling convention that is easy(ish) to use from Cmm in the I/O primops. So we add it to the RTS API struct, and since we'll use it from Cmm we also need a field accessor macro for cmm (in deriveConstants). See the Note about how we cannot have nice things due to async exceptions and thunks preventing us from using catch. - - - - - cfdb3399 by Duncan Coutts at 2026-09-09T11:07:01+01:00 Add new blocking functions for I/O primops See the Note [Thread blocking for new I/O primops], and the Note [Calling convention for raisePrimIOException]. The point is, it will allow us to report synchronous exceptions from I/O primops, and do so much more flexibly. Previously the I/O managers could only report async exceptions and only nullary exceptions. This was OK historically, but no good as we add more I/O managers and expand the range of I/O operations we support. - - - - - f09c09d8 by Duncan Coutts at 2026-09-09T11:07:01+01:00 Change the encoding of results from the I/O manager to I/O primops Previously we just had async continue or heap overflow. We now extend what we can report with synchronous success, and synchronous failure with an errno. See Note [Encoding of result of I/O manager operations] We don't use these two new cases yet, but we will. In particular an epoll I/O manager needs to be able to report synchronous success or failure for waitRead#/waitWrite#. - - - - - 30f074d9 by Duncan Coutts at 2026-09-09T11:07:01+01:00 Switch waitRead/Write# to use new blocking return frames and update the I/O managers to set the result before resuming the blocked threads. This makes it possible for I/O managers to report synchronous exceptions from the I/O primops, but that will be done in a subsequent commit. - - - - - a8786ced by Duncan Coutts at 2026-09-09T11:07:01+01:00 Switch Poll and Select I/O managers to report sync exceptions rather than using raiseAsync with blockedOnBadFD_closure. This uses the new mechanism in the blocking frame return code to report synchronous exceptions. - - - - - 7a9df79a by Duncan Coutts at 2026-09-09T11:07:01+01:00 Remove now-unused blockedOnBadFD It was previously thrown by the select and poll I/O managers, but now they use raisePrimIOException (with an EBADF errno). - - - - - 6b0424e3 by Duncan Coutts at 2026-09-09T11:07:01+01:00 Improve the docs for delay# waitRead# and waitWrite# Document that the waitRead/Write# can throw exceptions (this was true before too), and that all of them are async exception cancellation points. - - - - - afeb2c30 by Duncan Coutts at 2026-09-09T20:08:58-04:00 Enable printf warnings for trace functions and fix resulting warnings Most of the existing printf-style functions are annotated with attributes to enable gcc/clang warnings for the printf format string, but several trace functions in Trace.h were missing this annotation. Enable them, and fix the resulting warnings. - - - - - 9a442c93 by Alan Zimmerman at 2026-09-09T20:09:36-04:00 EPA: Exact print ConDeclGADT without custom enterAnn !16321 brought in explicit capture of parens in a ConDeclGADT. The ExactPrint update introduced a modification of the fundamental function in exact printing, `enterAnn`, by splitting it into a version allowing injection of functionality normally handled by the ExactPrint class methods. This commit refactors that code, to restore the prior `enterAnn` version, by following the convention in ExactPrint of introducing a helper data structure with its own `ExactPrint` instance to achieve the same effect. - - - - - 4e9297ea by Simon Jakobi at 2026-09-11T08:32:45-04:00 ci: Actually pass --ignore-perf-failures to the testsuite driver 684c0018d9 changed the IGNORE_PERF_FAILURES handling to append to RUNTEST_ARGS with bash array syntax, but the three use sites still expand RUNTEST_ARGS as a scalar, which yields only the first array element. The appended flag was therefore dropped in every job, so perf improvements kept failing Marge Bot batches and master pipelines, contrary to #19562. Append as a string instead, matching the existing --force-colors append in test_hadrian. Fixes #27563. Assisted-by: Claude Fable 5.1 - - - - - 4f78dfdf by Simon Jakobi at 2026-09-11T08:33:24-04:00 testsuite: Give T26537 a 1.5x compile timeout Its -fregs-graph compile step tends to time out in unoptimized builds (#27188, #27776). Assisted-by: Claude Fable 5.1 - - - - - 130286e3 by Alan Zimmerman at 2026-09-11T08:34:08-04:00 EPA: Remove ListBanana / ListParens from AnnListBrackets This is a step towards making AnnList only represent lists of items which can have either braces or layout. - - - - - a9827d13 by Simon Jakobi at 2026-09-11T18:53:32-04:00 Reject ~, UNPACK and multiplicity annotations on type data fields Only `!` was rejected so far. `~`, UNPACK and multiplicity annotations were silently accepted. None of them make sense at the type level, so restriction (R3) of Note [Type data declarations] now covers all of them. Fixes #27732. Assisted-by: Claude Fable 5.1 - - - - - c71d5e23 by Alan Zimmerman at 2026-09-11T18:54:11-04:00 EPA: Add a Note for the exact print main loop - - - - - 7a108e43 by Simon Jakobi at 2026-09-12T18:35:59-04:00 FastString: Drop mkFastStringWith's constructor callback All three callers passed the same callback, a partial application of mkNewFastStringShortByteString to the string being interned. That partial application is allocated as a closure before the table lookup, on the common hit path too, although the callback is needed only after a miss. Drop the parameter and call mkNewFastStringShortByteString directly after a miss. Since nothing is passed "with" anymore, rename the function to internSB. Suggested by Simon PJ in #27528: https://gitlab.haskell.org/ghc/ghc/-/work_items/27528#note_687031 Assisted-by: Claude Fable 5 - - - - - 82c73b22 by Alan Zimmerman at 2026-09-12T18:36:38-04:00 EPA: More targeted HsDo exact print annotation HsDo is multi-purpose, as encoded in its HsDoFlavour field. Some of these are in a layout context (DoExpr, MDoExpr), others are not (ListComp, MonadComp). We are moving towards using AnnList only in layout contexts, so we switch the HsDo TTG annotation from holding an AnnList for this, to holding Either (EpToken "[", EpToken "]") AnnList This also allows us to trim down AnnListBrackets to only have braces or None, thereby opening the door for unification with the existing layout context data type EpLayout. - - - - - 749d2448 by Luite Stegeman at 2026-09-15T14:07:01-04:00 rts: handle large CONSTR closures in compacting GC The function update_fwd_large in the compacting GC could run into an unexpected object with the following error: internal error: update_fwd_large: unknown/strange object 1 Closure type 1 is CONSTR. This patch adds cases for CONSTR and CONSTR_NOCAF. This is the same problem as #27434 (large AP closures, fixed by cca0d58963), which missed this case. Fixes #27649 - - - - - 177d6155 by Luite Stegeman at 2026-09-15T14:07:02-04:00 testsuite: fix T27434 test with compacting GC Ensure that the interpreter is actually run with the compacting GC - - - - - 5796aa63 by Luite Stegeman at 2026-09-15T14:07:49-04:00 rts: initialise the stack frame header for mask_frame and apply_mask_frame We must leave the stack in consistent state before jumping to mask_frame or apply_mask_frame because they may result. Failing to do so could lead to a crash if there were waiting exceptions. Fixes #27651 - - - - - 2486cc92 by Simon Peyton Jones at 2026-09-15T14:08:36-04:00 Re-introduce the "weird SpecDict" case In this commit commit f80375dd4945350a1d784e436975b48b9c736eaf Author: Simon Peyton Jones <simon.peytonjones@gmail.com> Date: Sun Jun 29 15:26:58 2025 +0100 Refactor of Specialise.hs I removed a test for a dictionary with unbound type variables. This turned out to be wrong; see #27629. So this MR re-introduces it. - - - - - 8e09a46f by Duncan Coutts at 2026-09-15T20:11:35-04:00 Refactor (and rename) removeFromQueues, to simplify I/O managers Rename it to unblockAndAppendToRunQueue which better reflects what it is intended to do. The post-condition for unblockAndAppendToRunQueue is that the TSO is on the run queue or it is in the process of migrating to another cap. Previously it achieved that by always directly adding the TSO to the run queue itself. But this actually made things more complicated for the I/O managers, because it meant they needed a separate code path for notifying for cancellation compared to notifying for completion. The general notification code would always add the TSO to the run queue itself. So the improvement is to allow different cases in unblockAndAppendToRunQueue to achieve the same outcome in different ways: either directly adding to the run queue or calling helper functions that do so themselves. This then allows the new I/O managers to share code between the sync and async cancellation, and to reuse their notifyIOCompletion helpers for cancellation. This avoids a source of bugs where the completion path may be updated but the cancellation path may be forgotten, or similarly in future for sync/async operations. Update all the existing in-RTS I/O managers, and the posix timeout code. - - - - - d668782c by Duncan Coutts at 2026-09-15T20:11:35-04:00 Document that awaitCompletedTimeoutsOrIO expects an empty run queue This was true before but implicit and not relied on much. It's better to be explicit, and allow things to depend on it. - - - - - 11d938bb by Duncan Coutts at 2026-09-15T20:11:35-04:00 Store the I/O opcode and fd in the StgAsyncIOOp This will be useful in several I/O managers and it is handy for logging and debugging. It also doesn't increase the size of the StgAsyncIOOp structure. There was enough spare padding space already. Update the poll I/O manager to set the new fields. Add a helper function to convert the enum IOReadOrWrite into the enum IOOpCode. Also change IOReadOrWrite to be an enum without a typedef, for consistency with other enumerations in IOManager.h - - - - - bfa87882 by Duncan Coutts at 2026-09-15T20:11:36-04:00 Add a new I/O manager based on select() Yes, this is the second such I/O manager, but it is a modern re-implementation based on the new in-RTS I/O manager infrastructure. So it is cleaner and faster than the old select I/O manager. Why do we need another I/O manager based on select? Why isn't the poll() one good enough as a baseline portable unix I/O manager? Because macOS. Apple Inc. is why we cannot have nice things. The man page for poll on macOS documents the fact that it does not work. At least, it does not work for all files. Specifically, it does not work for device files. Whereas macOS select() does work for device files. Aaaaarg! We _do_ want to deprecate and remove the old select I/O manager, but due to macOS we cannot do that until we have a replacement. This is that replacement. Until of course a nice new k-queue I/O manager arrives, which could become the new default for macOS and FreeBSD. Interestingly, this select I/O manager is actually faster than the poll one, on Linix, in some circumstances: specifically when many Haskell threads are waiting on the same fd. The poll I/O manager does O(n) work for n threads waiting on I/O, whereas the select one does O(fds) work for the number of fds that threads are waiting on. Usually this is 1:1, so it's not noticable, but one can concoct extreme benchmarks to show the difference. - - - - - 8e9de15a by Duncan Coutts at 2026-09-15T20:11:36-04:00 Minor updates in the poll I/O manager to keep in sync with select This keeps it in sync with select one. The changes are based on code review while implementing the new select I/O manager. The two I/O managers are so similar in structure that it makes sense to try to minimise the diff between them. This should aid understanding, and fixes to both in future. - - - - - 222668bb by Duncan Coutts at 2026-09-15T20:11:36-04:00 Document the new select I/O manager in the user guide in the RTS section about I/O managers. And add a changelog entry. - - - - - 0f48735b by Cheng Shao at 2026-09-15T20:12:23-04:00 Revert "wasm: workaround WebKit bug in dyld" This reverts commit c9b8465c2c338176fcab9d197e9d31f4aee11f68. The underlying webkit bug has been fixed in https://commits.webkit.org/314219@main. Closes #27564. - - - - - 809294f1 by Luite Stegeman at 2026-09-15T20:13:08-04:00 rts: make stg_threadLabelzh return a valid pointer for unlabeled threads. This fixes a segfault in the GC caused by stg_threadLabelzh returning a 0 pointer in a GC pointer field. stg_threadLabelzh returns a tuple of type (# Int#, ByteArray# #). If a thread has no label, the second field is unused. We must still return a valid heap object pointer. Instead of returning 0, we now return stg_DEAD_SLOT_closure. fixes #27618 - - - - - e2d57026 by Luite Stegeman at 2026-09-15T20:13:54-04:00 JS: fix selector thunk handling fix a bug where entering a selector thunk could lead to a crash if the selected field was still a thunk. fixes #27788 - - - - - 1b4a622f by sheaf at 2026-09-17T02:39:13-04:00 Improvements to type/data family handling This commit makes several improvements to the treatment of type and data families in GHC: - We consistently use "type family" instead of "type synonym family" to avoid a confusion with type synonyms. For example: - OpenSynFamilyTyCon ==> OpenTypeFamilyTyCon - ClosedSynFamilyTyCon => ClosedTypeFamilyTyCon - Various functions that were specific to data families have been renamed to make this clear. For example: - tyConFamInst_maybe ==> tyConDataFamInst_maybe - isFamInstTyCon ==> isDataFamInstTyCon - 'FamTyConFlav' has been refactored so that all closed type families share a single 'ClosedTypeFamilyTyCon' constructor. The corresponding 'IfaceFamTyConFlav' type was updated similarly. This is then used to tidy up the implementation of GHC.Core.FamInstEnv.reduceTyFamApp_maybe. - - - - - c5aa9098 by sheaf at 2026-09-17T02:39:13-04:00 Small refactor of lookupFamInstEnv This commit reworks the code for looking up family instances in GHC.Core.FamInstEnv, reducing duplication a little bit. No change in behaviour. - - - - - a3ad4588 by sheaf at 2026-09-17T02:39:14-04:00 Use a type family for boxing unboxed types This commit overhauls the way in which unboxed types are boxed, as per the updated Note [Boxing constructors] in GHC.Builtin.WiredIn.Types.Box. The main change is to allow boxing to be parametrised by representation, e.g. making 'Box ty' a valid type. We achieve this by implementing 'Box' using a closed type family: newtype Box (a :: TYPE r) = Box (BoxTF r) type BoxTF :: RuntimeRep -> Type type family BoxTF r where BoxTF IntRep = BoxInt BoxTF Int8Rep = BoxInt8 BoxTF WordRep = BoxWord BoxTF LiftedRep = Any @Type BoxTF (TupleRep [r1, r2]) = (BoxTF r1, BoxTF r2) ... BoxTF (SumRep rs) = BoxSum rs This new design solves the following problems: - It allows boxing a type whose 'RuntimeRep' has not yet been determined (e.g. because we only learn the 'RuntimeRep' after constraint solving). That is, 'Box @r a' is a perfectly valid type even if 'r' is an unfilled metavariable. This is a requirement to fix #25065 (in which we need to box a type whose 'RuntimeRep' is only filled in during constraint solving). - It handles boxing of unboxed tuples and unboxed sums, via recursive boxing. See Note [Boxing TupleRep and SumRep] in GHC.Builtin.WiredIn.Types.Box. 'Box', 'BoxTF' and all of the boxing data constructors are defined in a new 'ghc-internal' module, 'GHC.Internal.Box'. This module contains nothing but wired-in declarations, and GHC never loads its interface on account of a wired-in thing (GHC.Builtin.Modules.isWiredInOnlyModule); see Note [Loading instances for wired-in things] in GHC.Iface.Load. The individual boxing data constructors are deliberately left as an internal implementation detail, and not exported. The intended API is via the two new magic 'Id's: box :: forall {r} (a :: TYPE r). a -> Box a unbox :: forall {r} (a :: TYPE r). Box a -> a exported from 'GHC.PrimOps' (in 'ghc-experimental'). The old boxing data types (IntBox, WordBox, FloatBox, DoubleBox, DictBox) are no longer exported from base (CLC proposal #421). We use this new design to consistently desugar: - parallel comprehensions (GHC.HsToCore.ListComp.{deListComp,dsMcStmt}) - then/group/using statements (GHC.HsToCore.ListComp.{dsTransStmt,dsMcStmt}) - recursive do blocks (mdo/rec) (GHC.HsToCore.Expr.dsDo) - arrows (GHC.HsToCore.Arrows) by consistently using 'box'/'unbox' to deal with unboxed types being put into big tuples. We also adapt 'GHC.Tc.Gen.Match.{tcMcStmt,tcDoStmt}' to create fresh /representation-polymorphic/ type variables for the binders that we are going to put into a big tuple (previously, GHC only allowed lifted types in that position). These desugaring of box and unbox is explained in Note [Desugaring box & unbox] in GHC.Core.Make.Box. Roughly speaking, the desugaring looks like: box @r @ty e ==> K e unbox @r @ty e ==> case e of K x -> x where 'K' is the boxing data constructor at RuntimeRep 'r'. It's slightly more complicated than that in practice: we first need to insert a cast (see Note [The canonical type of a RuntimeRep]) using the new 'CanonicalProv' 'UnivCoProvenance', and unboxed tuples/sums need recursive logic explained in Note [box/unbox for unboxed tuples and sums], including a specific 'BoxSum' datatypes for unboxed sum (which also needed a wired-in type-level list indexing type family (!!)). The desugaring happens in two ways: - Occurrences of 'box'/'unbox' emitted by the typechecker are eliminated in the 'ds_app_var' case of GHC.HsToCore.Expr. - Other code that needs to box/unbox emits the appropriate code inline. This includes the big tuple machinery of GHC.Core.Make used by the desugarer (GHC.HsToCore.{Utils,Binds,Arrows,ListComp}) as well as the float-out pass (GHC.Core.Opt.SetLevels). Core Lint checks that no occurrence of 'box'/'unbox' survives desugaring. On the way, we overhaul the litany of big tuple functions by introducing data BigTupleLayout = BoxedElements | BareElements to distinguish the two kinds of "big tuples" that GHC routinely deals with; for example 'mkBigCoreVarTupSolo' becomes 'mkBigCoreVarTup BareElements'. All of this code is moved to the new module GHC.Core.Make.BigTuple. Fixes #20864 #22336 #22473 #25065 #27331 ------------------------- Metric Decrease: T9872a ------------------------- - - - - - 4cf7628a by Evgeny Malyshev at 2026-09-17T02:39:56-04:00 Fix the CompactionFailed documentation link to compact The old Haddock reference links into base instead of ghc-compact. Use an explicit URL because ghc-compact depends on base, not vice versa. Fixes #27558 Assisted-By: OpenAI Codex - - - - - 098bba70 by Facundo Domínguez at 2026-09-17T14:57:41-04:00 Remove the call to hoistFlag from processCmdLineP This call was undesirable because it was causing a reconstruction of the list of flag processors. Even relying on list fusion would not be sufficient because we want to replace the list with a data structure with faster lookups to address #25763. The removal is done in two moves: * We move CmdLineP to CmdLine.hs * Then we move the effect of hoisting to processArgs via a new function hoistEwM - - - - - e01799c7 by Facundo Domínguez at 2026-09-17T14:57:42-04:00 Do not create duplicate flag processors for the -W flag This makes simpler implementing the command line parser with a trie map holding flag processors. If we were to allow duplicate flag processors for any flag, the trie map would need to be a multimap. - - - - - 3875b257 by Facundo Domínguez at 2026-09-17T14:57:42-04:00 Replace the list of flag processors with a trie map in `processArgs` Previously `GHC.Driver.CmdLine.findArg` was called for each command-line argument, doing a linear search on the list of flag processors each time. This was somewhat costly as the list of flag processor has near 2000 elements. A lookup with a trie map is faster in general, but the speed up is only noticeable when calling `GHC.Driver.CmdLine.processArgs` sufficient times, so the amount of lookups piles up. This could happen in large projects with many units each having many dependencies. If only a module needs to be recompiled, the user still needs to wait for all of the flag parsing to complete. The benchmark at testsuite/tests/perf/compiler/cmdline-parser shows a 10x speed up when using the trie. The trie map is implemented in `GHC.Data.StringTrie`. The design is explained in Note [Processing command line argument fast] in GHC.Driver.Session. The commit also: * adds two property-based tests for trie map operations, * adds a benchmark of the command line parser, and * renames the predicate `arg_ok` to `valid_flag_suffix` to decide what flag processor should be used when there are multiple matching prefixes on a flag. Fixes #25763. - - - - - 5236634a by Andreas Klebinger at 2026-09-17T14:58:24-04:00 Compile Word64{Map,Set} with -O2 always. This is the hottest code and even if we build GHC with -O0 otherwise -O2 pays off for these modules. Fixes #27814. - - - - - 545fd4fb by ARATA Mizuki at 2026-09-22T15:03:24-04:00 Change the C types of hs_{bitrev,bswap}{16,32} to match the Haskell types bitReverse{16,32}# and byteSwap{16,32}# have the type Word# -> Word#, but their C correspondents took and returned StgWord{16,32}. The mismatch on bitReverse16# led to the problem reported in #27299. Although no similar issue is reported for bitReverse32# and byteSwap{16,32}#, it seemed wise to change them proactively. This commit fixes the mismatch by changing the C type. Fixes #27299 - - - - - bf17f289 by fendor at 2026-09-22T15:04:05-04:00 Don't lose instances from shadowed imported modules with the same name When we look for instances below the current module, we need to check the unit id as well when we check for whether the module is the current module, otherwise we ignore modules we import that have the same name as the import module. Adds regression test. - - - - - 53eead15 by Wolfgang Jeltsch at 2026-09-24T20:12:03-04:00 Correct the documentation of `explicitUnits` Resolves #27787. - - - - - 35bf6f4b by Simon Jakobi at 2026-09-24T20:12:49-04:00 Remove stale specHeader bullet from Note [Don't make fillers for constraint types] The Note said that Specialise.specHeader also calls mkAbsentFiller. abfc224a27c removed that call: the specialiser no longer drops dead arguments at all, see Note [Do not drop dead args from specialisations] in GHC.Core.Opt.Specialise. Assisted-by: Claude Fable 5.1 - - - - - 1abef1ef by Wolfgang Jeltsch at 2026-09-25T17:02:07-04:00 Improve the `mhu-closure` makefile - - - - - a79a68ea by Wolfgang Jeltsch at 2026-09-25T17:02:07-04:00 Make `ghci-multi` hide all unneeded packages - - - - - d6e72450 by Wolfgang Jeltsch at 2026-09-25T17:02:07-04:00 Improve the definition of the home unit closure property - - - - - c9a2766d by Wolfgang Jeltsch at 2026-09-25T17:02:07-04:00 Re-implement the home unit closure check Compared to the previous implementation, the new one has the following advantages: * It is correct. - It distinguishes between units that have the same unit ID but different ABI hashes. - When `-hide-all-packages` is not used, it considers as home unit dependencies also units that are made implicitly available because they are in the package database. * It seems to be faster in usual settings. - In particular, it does not have a preparation phase in which it merges the dependency information from all home units, so that its running time does not grow linearly with the size of the package database in normal Cabal scenarios. * It is (hopefully) clearer. * It is better documented. - - - - - fa96acf8 by Wolfgang Jeltsch at 2026-09-25T17:02:07-04:00 Remove erroneous GHC flag in `hadrian-multi` The flag was `-Werror=-Wno-error=incomplete-record-selectors`. Its purpose was to permit incomplete record selectors, but because of the illegal combination of `-Werror=` and `-Wno-error` it was ignored, without any negative consequences. - - - - - 9f48a5b9 by Alan Zimmerman at 2026-09-25T17:02:50-04:00 EPA: Add specific layout field to AnnList Up to now AnnList has effectively served to represent lists of things having layout, regardless of whether they do or not. In Haskell, layout is optional in many places, as there is also an alternative syntax using braces and semi-colons, which is free-form. This commit introduces AnnListLayout, a data structure capturing this distinction. It is deliberately set up similarly to EpLayout, so that these two can be merged in time. The transition is done mechanically, where AnnListBraces is not used yet, the original Nothing case maps to AnnListNoLayout, and the Just case to AnnListLayout. Later commits will fine tune these against the actual parser layout. - - - - - 234bab08 by Vladislav Zavialov at 2026-09-29T17:22:54-04:00 Add regression test for #7803 Commit 2effe18ab5, first shipped with GHC 8.2.1, fixed #7803 "Superclass methods are left unspecialized". This change turns the example from the ticket description into a regression test, checking that foo1 is fully specialised at Double, with no calls to the overloaded exp5Tail. Closes #7803 Assisted-by: Claude Opus 5 - - - - - c406135c by Andreas Klebinger at 2026-10-01T06:57:28-04:00 RTS: Update flag parsing/handling: Using 0 as argument to any of these flags now resets the flags setting to default: - ``-n0`` disables nursery chunking. - ``-K0`` (or a bare ``-K``) removes the stack size limit. - ``-M0`` removes the heap size limit. - ``-H0`` resets the suggested heap size, including the nursery scaling set by ``-H``. - ``-AL0`` makes the large object allocation limit follow ``-A`` again. GC Generations are now limited to 64. -n larger than -A now emits a warning and disables chunking. Fixes #27830 #27829 - - - - - 984ee82b by Andreas Klebinger at 2026-10-01T06:58:10-04:00 Fix MultiLayerModules timeout multiplier. We accidentally used the compile multiplier for ghci commands which use the run timeout setting to set the timeout. Fixes #26263 and #27796. - - - - - 50a9cf26 by Andreas Klebinger at 2026-10-01T06:58:10-04:00 testsuite: Include runtime in JUnit report. - - - - - e358619f by Alan Zimmerman at 2026-10-01T06:59:01-04:00 EPA: Use EpaLocation in EpVirtualBraces Haddock processing uses EpLayout.EpVirtualBraces to record the current layout column, for allocating haddock comments correctly. For exact printing, we need the line as well as the col, so we know how many lines to skip when the indented code block starts. This commit updates EpLayout.EpVirtualBraces so that it carries an EpaLocation instead of just the Int column, to allow it to be used for both purposes. It is a simple mechanical change, with no other impact, but it allows us to use EpLayout instead of AnnListLayout in AnnList, in the next commit in this series. - - - - - 1d2a26ee by Andrew Lelechenko at 2026-10-01T20:22:04-04:00 Remove bitSize from MINIMAL pragma of class Bits Cf. https://github.com/haskell/core-libraries-committee/issues/441 The function is deprecated for 12 years and has a default implementation, yet it was never removed from the MINIMAL pragma, putting library authors in a very awkward position. Let's finally remove bitSize from MINIMAL. - - - - - 3cc21e4c by Hannes Siebenhandl at 2026-10-01T20:22:59-04:00 Add regression test for #27641 - - - - - c35096f5 by Hannes Siebenhandl at 2026-10-01T20:23:00-04:00 Don't `:add` modules the loader will reject Only home modules can be actually added to the loader context, thus we only accept the module if it belongs to a home unit. - - - - - a563cb27 by Simon Jakobi at 2026-10-02T17:37:36-04:00 ci: accept modified changelog.d entries in lint-changelog The changelog guide says to extend an existing entry rather than add a new one when the feature is already documented. lint_changelog only counted added files, so such MRs failed before the validator ran. Fixes #27779. Assisted-by: Claude Fable 5.1 - - - - - 03082cd4 by Simon Jakobi at 2026-10-02T17:38:17-04:00 changelog.d: Fix warning flag name in the semaphore-v2 entry The entry refers to -Wsemaphore-version-mismatch, which does not exist. The warning GHC emits when it cannot use a -jsem semaphore, including on a protocol version mismatch, is -Wsemaphore-open-failure. Context: !15729, #25087 Assisted-by: Claude Fable 5.1 - - - - - a93705ee by Simon Jakobi at 2026-10-02T17:38:17-04:00 changelog.d: Fix the CLC proposal link in the T27455 entry The entry used the Sphinx :ref: role with a URL as its target. :ref: resolves only internal labels, so the generated release notes would show the proposal name without a link. Use the plain hyperlink form like the other entries. Context: !16274, #27455 Assisted-by: Claude Fable 5.1 - - - - - 54381079 by Hannes Siebenhandl at 2026-10-02T17:39:01-04:00 Extend the `TrustOverlay` for wired-in units The TrustOverlay only contained the `UnitId` of all on-disk units. However, wired-in units are referred to by their wired-in unit id, which is not the same as the on-disk unit id. Thus, trust checks for wired-in units failed because the lookup was using the wired-in unit, which wasn't present in the `TrustOverlay`. We fix #27834, by copying the trust info for wired-in unit ids. - - - - - bb8ae7de by Rodrigo Mesquita at 2026-10-05T18:14:12+02:00 Refactor GHC.Driver.MakeAction Pull out of 'runParPipelines' the logic for creating a 'MakeEnv' ready to be used by multiple threads, as that will be useful for downsweep as well (which doesn't fit the 'runPipelines' flow), rather than being just for upsweep. The code is moved and re-structured to match the export list, simplify the sequentiality checks previously both in 'runPipelines' and 'runAllPipelines', which were weirdly similar and confusing; into the two part step where we need these checks: (1) to construct the MakeEnv, (2) to run the MakeActions in parallel. These two steps are separate and used to be too mixed up. Some additional little simplifications or clean ups here and there. - - - - - 427b45c6 by Rodrigo Mesquita at 2026-10-05T18:14:12+02:00 Refactor GHC.Driver.Downsweep in preparation for parallel downsweep Pure refactor to improve the code to facilitate implementing parallel downsweep in the next commit. This commit puts a MakeEnv into the DownsweepEnv, gives the fields proper names and uses RecordWildcards to simplify, rather than passing around all diagnostic wrappers, driver-message-things and using 10s of positional fields. No behavior changes here! - - - - - 1c55df67 by sheaf at 2026-10-05T18:14:12+02:00 Driver: enableCodeGenForTH in load', not downsweep enableCodeGenForTH modifies the module graph for planning, creating fresh temporary paths. So it should only be run when we are about to execute a build plan (e.g. in load'), so that consumers that want to know facts about the module graph don't go looking for files that don't exist yet (in particular 'haddock --no-compilation'). - - - - - 6c62b5cf by sheaf at 2026-10-05T18:14:12+02:00 2-phase Cache/Search Finder monad This commit restructures the finder abstraction by introducing the 'FinderM' monad, which splits module lookup operations into two phases: - a cache-only phase, performing no filesystem access, - from the first cache miss onwards, a search action which may access the filesystem. This allows consumers to distinguish between quick cached results versus more expensive filesystem search operations. - - - - - 8d2c89c2 by sheaf at 2026-10-05T18:14:13+02:00 Separate Home/External finder caches The caches for home modules and modules from external units have different lifetimes, needing to be invalidated at different points. This commit moves the cache for modules from external units into the 'UnitState' type, which keeps the cache correct whenever package flags or package databases change (setSessionDynFlags, :set -package ..., Backpack's addUnit). This also makes it easier to clear the cache of home modules, as they are now stored separately (obviating the 'isUnitEnvInstalledModule' check we used to perform). - - - - - 057b0495 by sheaf at 2026-10-05T18:14:13+02:00 Add known home modules to the finder cache The finder looks in the file system for the on-disk source that corresponds to a Haskell module name. There are two kinds of modules where we need to bypass this search: - a file passed directly in the command line, which may not be in any search path and whose module name may differ from the file name; - Backpack signatures and modules, which do not exist as files at all. This commit handles these two situations by adding an immutable 'KnownHomeModules' in the finder cache, which is always consulted first before doing any search. This removes the ad-hoc imperative logic which relied on mutating the finder cache at careful points. 'setModuleGraph' now also takes the known home modules, so that the module graph and the known home modules are always set consistently. See Note [Known home modules] in GHC.Unit.Finder.Types. - - - - - 61949af3 by sheaf at 2026-10-05T18:14:37+02:00 Make 'UnresolvedImport' into a suitable cache key The goal of this commit is to make 'UnresolvedImport' suitable for use as a cache key. Specifically, during downsweep we want to be able to cache module resolution queries. We want to do this using some kind of map, e.g. (roughly speaking): Map UnresolvedImport ResolvedImport For this to work, 'UnresolvedImport' must contain **precisely** the input data to each resolution computation. In other words: 1. If something changes that materially affects resolution, it must be stored in the cache key. 2. If changing some input does not materially affect the outcome, then it must not be stored in the cache key. To satisfy (1), we change 'UnitNode' to also keeps track of the home unit in whose unit state the unit's dependencies were looked up. For (2), 'ImportResolution' now stores a 'ModuleLookupScope' instead of an 'UnresolvedImportOrigin'. Plugin imports are expressed with a new 'LookupPlugin' scope. The source location of an import, which is immaterial to the resolution, is stored out of band outside 'UnresolvedImport', in 'ModSummary'. - - - - - 2c23e070 by sheaf at 2026-10-05T18:14:39+02:00 Add GHC.Data.Dependent This commit adds a minimal implementation of dependent sums ('Some', 'DSum') and dependent maps ('DMap'). The implementation is not entirely performance optimal, as there are a few extraneous allocations compared to the full-blown implementation in the 'dependent-map' package. For our use case (caching downsweep computations), this does not matter much. See GHC.Data.Dependent. - - - - - 9caaeb45 by sheaf at 2026-10-05T18:14:39+02:00 Driver: structured concurrent worker abstraction This commit introduces a structured concurrency framework in the style of the 'ki' library: a collection of threads within a scope. We implement two kinds of concurrent workers on top of this framework: - Independent workers cannot wait for one another at all. The only scheduling operation is to wait for quiescence. - Coordinating workers declare an STM readiness condition (waiting on other workers to complete) which gates their start. See Note [Deterministic concurrent workers] in GHC.Driver.Concurrency. This commit ports upsweep to this new framework, with downsweep being left as subsequent work. Further changes along the way: - Refactoring of how concurrency is acquired to avoid the footgun of trying to use a no-op 'AbstractSem' as a lock in the serial case. - The "re-run with -j1" logic for semaphore opening errors no longer triggers on late semaphore failures (part-way through a lengthy computation). - Logger threads are properly cleaned up on exception, with each concurrent worker's log queue and local TmpFs properly bracketed. - The 'GhcMessage -> AnyGhcDiagnostic' and 'Maybe Messager' arguments of 'depanalE', 'depanalPartial' and 'downsweep', which were all dead in practice, have been dropped. - Concurrent logging has been completely overhauled. Each worker has its own log queue. Workers whose logs are printed as we go are spawned in the order in which their logs must be printed, now using a TQueue instead of the old complicated LogQueueQueue mechanism. 'logThread' is replaced by 'withLogPrinter', which runs the thread that prints the log queues within a concurrent worker scope. These changes allow us to fix issues with the exception handling: we now always flush remaining log queues before exiting (even when the action throws an exception), and exceptions that arise while printing are properly rethrown. - - - - - 045b0365 by sheaf at 2026-10-05T18:15:54+02:00 Rule-based deterministic concurrent downsweep This commit rewrites downsweep as a single query-answering rule (see 'DownsweepRule') that can be executed by concurrent worker threads. The design allows every expensive operation (preprocessing files with CPP, parsing headers, reading interfaces) to be performed concurrently according to the -j<N>/-jsem flags. See Note [Rules-based downsweep] in GHC.Driver.Downsweep. The rules are run by "GHC.Driver.Concurrency.runRules" in a demand-driven way: each worker can demand other workers to run, but never wait on another worker. Every piece of work is done at most once. Fixes #27514 ------------------------- Metric Increase: MultiComponentModulesRecomp MultiComponentModulesRecomp100 ------------------------- - - - - - 020fd5d5 by sheaf at 2026-10-05T18:15:55+02:00 Acquire/release semaphore tokens more readily This commit reworks GHC.Driver.MakeSem to use the scoped worker abstraction of GHC.Utils.Concurrent.Scope. This allows us to get rid of a lot of the tricky logic in GHC.Driver.MakeSem involving manual exception handling, thread spawning and lifetime management, etc. The main user-visible change is that token acquisition is no longer rate limited (due to a bug, there previously was a 1s rate limit on acquisition of semaphore tokens), with the release debounce period shortened from 1s to 10ms. Other changes: - With -jsem, the number of capabilities is now capped at the number of processors, bringing it in line with the -jN behaviour. - Pending jobs whose wait for a token is interrupted by an exception are now withdrawn from the jobserver, instead of acquiring a token that it hung onto without doing useful work. Fixes #27763 - - - - - 619 changed files: - .gitlab-ci.yml - .gitlab/ci.sh - .gitlab/rel_eng/mk-ghcup-metadata/mk_ghcup_metadata.py - + changelog.d/25763-cmdline-opt - + changelog.d/26610 - + changelog.d/27556 - + changelog.d/27627 - + changelog.d/27641 - + changelog.d/27703 - + changelog.d/27704 - + changelog.d/27717 - + changelog.d/27732 - changelog.d/T27202 - changelog.d/T27455 - + changelog.d/T27629 - + changelog.d/T27657 - + changelog.d/T27705 - + changelog.d/T27722-cbe-entry-block.md - + changelog.d/T27744 - + changelog.d/T27749 - + changelog.d/T27763 - + changelog.d/T27764 - + changelog.d/T27788-js-selector - + changelog.d/T27830-rts-flag-bounds - + changelog.d/allow-gadt-prefix-con-parens - + changelog.d/arm_ncg_fixes_T27430 - + changelog.d/boxing-family - + changelog.d/clc-421 - + changelog.d/fix-compacting-gc-constr-27649 - + changelog.d/fix-control0-mask-trampoline - + changelog.d/fix-parallel-gc-selector-race-27477 - + changelog.d/fix-threadlabel-segfault-27618 - + changelog.d/implicit-field-strictness-warning - changelog.d/lazy-field-annotations - + changelog.d/llvm-23 - + changelog.d/ncg-x86-bit-test-instructions - + changelog.d/parallel-downsweep - + changelog.d/rethrow-stm - + changelog.d/select-io-manager - changelog.d/semaphore-v2 - changelog.d/unit-index - compiler/GHC.hs - compiler/GHC/Builtin.hs - compiler/GHC/Builtin/KnownKeys.hs - compiler/GHC/Builtin/Modules.hs - compiler/GHC/Builtin/Uniques.hs - compiler/GHC/Builtin/WiredIn/Ids.hs - compiler/GHC/Builtin/WiredIn/Prim.hs - compiler/GHC/Builtin/WiredIn/TypeLits.hs - compiler/GHC/Builtin/WiredIn/Types.hs - + compiler/GHC/Builtin/WiredIn/Types/Box.hs - compiler/GHC/Builtin/primops.txt.pp - compiler/GHC/Cmm/CommonBlockElim.hs - compiler/GHC/Cmm/DebugBlock.hs - compiler/GHC/Cmm/Expr.hs - compiler/GHC/Cmm/Lint.hs - compiler/GHC/Cmm/MachOp.hs - compiler/GHC/Cmm/Parser.y - compiler/GHC/CmmToAsm/AArch64/CodeGen.hs - compiler/GHC/CmmToAsm/AArch64/Instr.hs - compiler/GHC/CmmToAsm/AArch64/Ppr.hs - compiler/GHC/CmmToAsm/X86/CodeGen.hs - compiler/GHC/CmmToAsm/X86/Instr.hs - compiler/GHC/CmmToAsm/X86/Ppr.hs - compiler/GHC/Core.hs - compiler/GHC/Core/Coercion.hs - compiler/GHC/Core/Coercion/Axiom.hs - compiler/GHC/Core/DataCon.hs - compiler/GHC/Core/FamInstEnv.hs - compiler/GHC/Core/Lint.hs - compiler/GHC/Core/Make.hs - + compiler/GHC/Core/Make/BigTuple.hs - + compiler/GHC/Core/Make/Box.hs - compiler/GHC/Core/Opt/SetLevels.hs - compiler/GHC/Core/Opt/Specialise.hs - compiler/GHC/Core/Opt/WorkWrap/Utils.hs - compiler/GHC/Core/TyCo/Ppr.hs - compiler/GHC/Core/TyCo/Rep.hs - compiler/GHC/Core/TyCon.hs - compiler/GHC/Core/Type.hs - compiler/GHC/Core/Utils.hs - compiler/GHC/CoreToStg.hs - compiler/GHC/CoreToStg/AddImplicitBinds.hs - compiler/GHC/CoreToStg/Prep.hs - + compiler/GHC/Data/Dependent.hs - compiler/GHC/Data/FastString.hs - + compiler/GHC/Data/StringTrie.hs - compiler/GHC/Data/Word64Map/Internal.hs - compiler/GHC/Data/Word64Map/Strict/Internal.hs - compiler/GHC/Data/Word64Set/Internal.hs - compiler/GHC/Driver/Backpack.hs - compiler/GHC/Driver/CmdLine.hs - + compiler/GHC/Driver/Concurrency.hs - + compiler/GHC/Driver/Config/Concurrency.hs - compiler/GHC/Driver/Downsweep.hs - compiler/GHC/Driver/Env.hs - compiler/GHC/Driver/Errors/Ppr.hs - compiler/GHC/Driver/Errors/Types.hs - compiler/GHC/Driver/Flags.hs - compiler/GHC/Driver/GenerateCgIPEStub.hs - compiler/GHC/Driver/Main/Compile.hs - compiler/GHC/Driver/Main/Passes.hs - compiler/GHC/Driver/Make.hs - compiler/GHC/Driver/MakeAction.hs - compiler/GHC/Driver/MakeFile.hs - compiler/GHC/Driver/MakeSem.hs - compiler/GHC/Driver/Pipeline/Execute.hs - compiler/GHC/Driver/Pipeline/LogQueue.hs - compiler/GHC/Driver/Session.hs - compiler/GHC/Driver/Session/Units.hs - compiler/GHC/Hs/Decls.hs - compiler/GHC/Hs/Doc.hs - compiler/GHC/Hs/Expr.hs - compiler/GHC/Hs/Extension/Pass.hs - compiler/GHC/Hs/Instances.hs - compiler/GHC/Hs/Pat.hs - compiler/GHC/Hs/Type.hs - compiler/GHC/Hs/Utils.hs - compiler/GHC/HsToCore/Arrows.hs - compiler/GHC/HsToCore/Binds.hs - compiler/GHC/HsToCore/Expr.hs - compiler/GHC/HsToCore/ListComp.hs - compiler/GHC/HsToCore/Quote.hs - compiler/GHC/HsToCore/Utils.hs - compiler/GHC/Iface/Decl.hs - compiler/GHC/Iface/Ext/Ast.hs - compiler/GHC/Iface/Load.hs - compiler/GHC/Iface/Recomp.hs - compiler/GHC/Iface/Rename.hs - compiler/GHC/Iface/Syntax.hs - compiler/GHC/Iface/Tidy.hs - compiler/GHC/IfaceToCore.hs - compiler/GHC/Linker/Deps.hs - compiler/GHC/Parser.y - compiler/GHC/Parser/Annotation.hs - compiler/GHC/Parser/Header.hs - compiler/GHC/Parser/PostProcess.hs - compiler/GHC/Parser/PostProcess/Haddock.hs - compiler/GHC/Rename/Expr.hs - compiler/GHC/Rename/HsType.hs - compiler/GHC/Rename/Module.hs - compiler/GHC/Runtime/Interpreter/JS.hs - compiler/GHC/Runtime/Loader.hs - compiler/GHC/Stg/Debug.hs - compiler/GHC/Stg/Lint.hs - compiler/GHC/StgToJS/Apply.hs - compiler/GHC/StgToJS/CodeGen.hs - compiler/GHC/StgToJS/Linker/Linker.hs - compiler/GHC/StgToJS/Symbols.hs - compiler/GHC/Tc/Deriv.hs - compiler/GHC/Tc/Deriv/Generate.hs - compiler/GHC/Tc/Deriv/Generics.hs - compiler/GHC/Tc/Errors/Ppr.hs - compiler/GHC/Tc/Errors/Types.hs - compiler/GHC/Tc/Gen/Expr.hs - compiler/GHC/Tc/Gen/HsType.hs - compiler/GHC/Tc/Gen/Match.hs - compiler/GHC/Tc/Gen/Pat.hs - compiler/GHC/Tc/Gen/Splice.hs - compiler/GHC/Tc/Instance/Family.hs - compiler/GHC/Tc/Instance/Typeable.hs - compiler/GHC/Tc/Module.hs - compiler/GHC/Tc/Plugin.hs - compiler/GHC/Tc/Solver/Default.hs - compiler/GHC/Tc/Solver/FunDeps.hs - compiler/GHC/Tc/TyCl.hs - compiler/GHC/Tc/TyCl/Instance.hs - compiler/GHC/Tc/TyCl/PatSyn.hs - compiler/GHC/Tc/Utils/Backpack.hs - compiler/GHC/Types/CompleteMatch.hs - compiler/GHC/Types/Demand.hs - compiler/GHC/Types/Error/Codes.hs - compiler/GHC/Types/Hint.hs - compiler/GHC/Types/Hint/Ppr.hs - compiler/GHC/Types/Id.hs - compiler/GHC/Types/Id/Info.hs - compiler/GHC/Types/Id/Make.hs - compiler/GHC/Types/Literal.hs - compiler/GHC/Types/Tickish.hs - compiler/GHC/Types/TyThing.hs - compiler/GHC/Types/TyThing/Ppr.hs - compiler/GHC/Types/Unique.hs - compiler/GHC/Types/UnresolvedImport.hs - compiler/GHC/Unit/Env.hs - compiler/GHC/Unit/External/Wired.hs - compiler/GHC/Unit/Finder.hs - + compiler/GHC/Unit/Finder/Cache.hs - compiler/GHC/Unit/Finder/Types.hs - compiler/GHC/Unit/Module/Graph.hs - compiler/GHC/Unit/Module/ModSummary.hs - compiler/GHC/Unit/Module/WholeCoreBindings.hs - compiler/GHC/Unit/State.hs - compiler/GHC/Unit/Types.hs - + compiler/GHC/Utils/Concurrent/Scope.hs - compiler/GHC/Utils/TmpFs.hs - compiler/Language/Haskell/Syntax/Decls.hs - compiler/Language/Haskell/Syntax/Type.hs - compiler/ghc.cabal.in - configure.ac - docs/users_guide/exts/gadt_syntax.rst - docs/users_guide/exts/strict.rst - docs/users_guide/exts/type_data.rst - docs/users_guide/runtime_control.rst - docs/users_guide/using-warnings.rst - ghc/GHC/Driver/Session/Mode.hs - ghc/GHCi/UI.hs - ghc/Main.hs - hadrian/README.md - hadrian/doc/cross-compile.md - hadrian/doc/flavours.md - hadrian/doc/make.md - hadrian/doc/windows.md - hadrian/ghci-multi-cabal.in - hadrian/hadrian.cabal - hadrian/src/Base.hs - hadrian/src/Builder.hs - hadrian/src/CommandLine.hs - hadrian/src/Flavour.hs - hadrian/src/Hadrian/Builder.hs - hadrian/src/Hadrian/Builder/Ar.hs - hadrian/src/Hadrian/Oracles/Path.hs - hadrian/src/Hadrian/Utilities.hs - hadrian/src/Oracles/Setting.hs - hadrian/src/Oracles/TestSettings.hs - hadrian/src/Rules/BinaryDist.hs - hadrian/src/Rules/Changelog.hs - hadrian/src/Rules/Codes.hs - hadrian/src/Rules/Lint.hs - hadrian/src/Rules/Nofib.hs - hadrian/src/Rules/Test.hs - hadrian/src/Settings.hs - − hadrian/src/Settings/Flavours/Quickest.hs - libraries/base/base.cabal.in - libraries/base/changelog.md - + libraries/base/src/Data/RealFloat.hs - libraries/base/src/GHC/Base.hs - libraries/base/src/GHC/Conc.hs - libraries/base/src/GHC/Exts.hs - libraries/base/src/GHC/RTS/Flags.hs - libraries/base/tests/all.T - libraries/ghc-internal/ghc-internal.cabal.in - libraries/ghc-internal/include/RtsIfaceSymbols.h - libraries/ghc-internal/src/GHC/Internal/Bits.hs - + libraries/ghc-internal/src/GHC/Internal/Box.hs - libraries/ghc-internal/src/GHC/Internal/Conc/IO.hs - libraries/ghc-internal/src/GHC/Internal/Event/Thread.hs - libraries/ghc-internal/src/GHC/Internal/Exts.hs - libraries/ghc-internal/src/GHC/Internal/IO/Exception.hs - libraries/ghc-internal/src/GHC/Internal/RTS/Flags.hsc - libraries/ghc-internal/src/GHC/Internal/STM.hs - libraries/ghc-internal/src/GHC/Internal/TypeNats.hs - libraries/ghc-internal/src/GHC/Internal/Types.hs - libraries/stm - linters/lint-codes/LintCodes/Static.hs - m4/find_python.m4 - + m4/fp_canonicalise_win_path.m4 - m4/fp_find_nm.m4 - m4/fp_find_root.m4 - m4/fp_prog_ar.m4 - m4/fp_prog_ar_args.m4 - m4/fp_prog_sh.m4 - m4/fptools_alex.m4 - m4/fptools_happy.m4 - rts/Capability.c - rts/CloneStack.c - rts/Continuation.c - rts/ContinuationOps.cmm - rts/HeapStackCheck.cmm - rts/IOManager.c - rts/IOManager.h - rts/IOManagerInternals.h - rts/Interpreter.c - rts/Messages.c - rts/Prelude.h - rts/PrimOps.cmm - rts/Printer.c - rts/ProfHeap.c - rts/RaiseAsync.c - rts/RtsFlags.c - rts/STM.c - rts/Schedule.c - rts/Sparks.c - rts/StableName.c - rts/StgMiscClosures.cmm - rts/ThreadPaused.c - rts/Threads.c - rts/Threads.h - rts/Trace.h - rts/configure.ac - rts/eventlog/EventLog.c - rts/include/rts/Flags.h - rts/include/rts/RtsToHsIface.h - rts/include/rts/storage/Closures.h - rts/include/rts/storage/GC.h - rts/include/stg/MiscClosures.h - rts/include/stg/Prim.h - rts/linker/elf_reloc_riscv64.c - rts/posix/Poll.c - rts/posix/Poll.h - rts/posix/Select.c - + rts/posix/SelectBis.c - + rts/posix/SelectBis.h - rts/posix/Timeout.c - rts/posix/Timeout.h - rts/prim/atomic.c - rts/prim/bitrev.c - rts/prim/bswap.c - rts/rts.cabal - rts/sm/Compact.c - rts/sm/Evac.c - rts/sm/GC.c - rts/sm/GCUtils.c - rts/sm/MBlock.c - rts/sm/NonMoving.c - rts/sm/NonMovingMark.c - rts/sm/Storage.c - rts/sm/Sweep.c - testsuite/driver/README.md - testsuite/driver/junit.py - testsuite/driver/testglobals.py - testsuite/driver/testlib.py - testsuite/tests/MiniQuickCheck.hs - testsuite/tests/arrows/should_run/all.T - + testsuite/tests/arrows/should_run/arrowrun005.hs - + testsuite/tests/arrows/should_run/arrowrun005.stdout - + testsuite/tests/bytecode/T27633/Obj.hs - + testsuite/tests/bytecode/T27633/T27633a.hs - + testsuite/tests/bytecode/T27633/T27633a.stdout - + testsuite/tests/bytecode/T27633/T27633b.hs - + testsuite/tests/bytecode/T27633/T27633b.stdout - + testsuite/tests/bytecode/T27633/all.T - testsuite/tests/cmm/should_compile/Makefile - + testsuite/tests/cmm/should_compile/T27368-ppr-debug.stderr - − testsuite/tests/cmm/should_compile/T27368-ppr-debug.stdout - testsuite/tests/cmm/should_compile/all.T - + testsuite/tests/codeGen/should_gen_asm/T25233.asm - + testsuite/tests/codeGen/should_gen_asm/T25233.hs - + testsuite/tests/codeGen/should_gen_asm/T25233b.asm - + testsuite/tests/codeGen/should_gen_asm/T25233b.cmm - testsuite/tests/codeGen/should_gen_asm/all.T - + testsuite/tests/codeGen/should_run/T27430.hs - + testsuite/tests/codeGen/should_run/T27430.stdout - + testsuite/tests/codeGen/should_run/T27430_c.c - + testsuite/tests/codeGen/should_run/T27533.hs - + testsuite/tests/codeGen/should_run/T27533.stdout - + testsuite/tests/codeGen/should_run/T27533_cmm.cmm - + testsuite/tests/codeGen/should_run/T27537.hs - + testsuite/tests/codeGen/should_run/T27537.stdout - + testsuite/tests/codeGen/should_run/T27538.hs - + testsuite/tests/codeGen/should_run/T27538.stdout - testsuite/tests/codeGen/should_run/all.T - + testsuite/tests/concurrent/should_run/T27657a.hs - + testsuite/tests/concurrent/should_run/T27657a.stdout - + testsuite/tests/concurrent/should_run/T27657b.hs - + testsuite/tests/concurrent/should_run/T27657b.stdout - testsuite/tests/concurrent/should_run/all.T - + testsuite/tests/core-to-stg/T27627/Callee.hs - + testsuite/tests/core-to-stg/T27627/Caller.hs - + testsuite/tests/core-to-stg/T27627/Main.hs - + testsuite/tests/core-to-stg/T27627/T27627.stdout - + testsuite/tests/core-to-stg/T27627/all.T - + testsuite/tests/core-to-stg/T27627a/Callee.hs - + testsuite/tests/core-to-stg/T27627a/Caller.hs - + testsuite/tests/core-to-stg/T27627a/Main.hs - + testsuite/tests/core-to-stg/T27627a/T27627a.stdout - + testsuite/tests/core-to-stg/T27627a/all.T - + testsuite/tests/core-to-stg/T27627b/Callee.hs - + testsuite/tests/core-to-stg/T27627b/Caller.hs - + testsuite/tests/core-to-stg/T27627b/Main.hs - + testsuite/tests/core-to-stg/T27627b/T27627b.stdout - + testsuite/tests/core-to-stg/T27627b/all.T - + testsuite/tests/core-to-stg/T27627c/Callee.hs - + testsuite/tests/core-to-stg/T27627c/Caller.hs - + testsuite/tests/core-to-stg/T27627c/Main.hs - + testsuite/tests/core-to-stg/T27627c/T27627c.stdout - + testsuite/tests/core-to-stg/T27627c/all.T - + testsuite/tests/core-to-stg/T27627e.hs - + testsuite/tests/core-to-stg/T27627e.stdout - + testsuite/tests/core-to-stg/T27627f/Callee.hs - + testsuite/tests/core-to-stg/T27627f/Caller.hs - + testsuite/tests/core-to-stg/T27627f/Inst.hs - + testsuite/tests/core-to-stg/T27627f/Main.hs - + testsuite/tests/core-to-stg/T27627f/T27627f.stdout - + testsuite/tests/core-to-stg/T27627f/all.T - + testsuite/tests/core-to-stg/T27704/Callee.hs - + testsuite/tests/core-to-stg/T27704/Callee.hs-boot - + testsuite/tests/core-to-stg/T27704/Main.hs - + testsuite/tests/core-to-stg/T27704/Mid.hs - + testsuite/tests/core-to-stg/T27704/T27704.stdout - + testsuite/tests/core-to-stg/T27704/all.T - + testsuite/tests/core-to-stg/T27704a/Callee.hs - + testsuite/tests/core-to-stg/T27704a/Callee.hs-boot - + testsuite/tests/core-to-stg/T27704a/Main.hs - + testsuite/tests/core-to-stg/T27704a/Mid.hs - + testsuite/tests/core-to-stg/T27704a/T27704a.stdout - + testsuite/tests/core-to-stg/T27704a/all.T - + testsuite/tests/core-to-stg/T27717/Callee.hs - + testsuite/tests/core-to-stg/T27717/Callee.hs-boot - + testsuite/tests/core-to-stg/T27717/Main.hs - + testsuite/tests/core-to-stg/T27717/Mid.hs - + testsuite/tests/core-to-stg/T27717/T27717.stdout - + testsuite/tests/core-to-stg/T27717/Ty.hs - + testsuite/tests/core-to-stg/T27717/all.T - testsuite/tests/core-to-stg/all.T - testsuite/tests/count-deps/CountDepsParser.stdout - + testsuite/tests/deSugar/should_compile/T25065a.hs - testsuite/tests/deSugar/should_compile/all.T - + testsuite/tests/deSugar/should_run/T20864.hs - + testsuite/tests/deSugar/should_run/T20864.stdout - + testsuite/tests/deSugar/should_run/T25065b.hs - + testsuite/tests/deSugar/should_run/T25065b.stdout - testsuite/tests/deSugar/should_run/all.T - testsuite/tests/diagnostic-codes/codes.stdout - testsuite/tests/driver/T27461/Makefile - + testsuite/tests/driver/T27461/T27461c.stderr - testsuite/tests/driver/T27461/all.T - + testsuite/tests/driver/T27461/src/Wrong.hs - testsuite/tests/driver/all.T - testsuite/tests/driver/multipleHomeUnits/mhu-closure/Makefile - testsuite/tests/driver/multipleHomeUnits/mhu-closure/mhu-closure.stderr - testsuite/tests/driver/multipleHomeUnits/mhu-closure/mhu-closure.stdout - + testsuite/tests/driver/stringtrie.hs - + testsuite/tests/driver/stringtrie.stdout - testsuite/tests/ffi/should_run/T21305.hs - − testsuite/tests/gadt/T14320.stderr - testsuite/tests/gadt/T18191.hs - testsuite/tests/gadt/T18191.stderr - + testsuite/tests/gadt/T27423a.hs - + testsuite/tests/gadt/T27423b.hs - + testsuite/tests/gadt/T27423b.stderr - testsuite/tests/gadt/all.T - testsuite/tests/ghc-api/T25121_status.stdout - testsuite/tests/ghc-api/downsweep/IncrementalDownsweep.hs - testsuite/tests/ghc-api/downsweep/OldModLocation.hs - testsuite/tests/ghc-api/downsweep/PartialDownsweep.hs - testsuite/tests/ghc-api/exactprint/T22919.stderr - testsuite/tests/ghc-api/exactprint/Test20239.stderr - testsuite/tests/ghc-api/exactprint/ZeroWidthSemi.stderr - testsuite/tests/ghc-api/fixed-nodes/FixedNodes.hs - testsuite/tests/ghc-api/fixed-nodes/InterfaceModuleGraph.hs - testsuite/tests/ghc-api/fixed-nodes/ModuleGraphInvariants.hs - + testsuite/tests/ghci.debugger/scripts/T27633c.hs - + testsuite/tests/ghci.debugger/scripts/T27633c.script - + testsuite/tests/ghci.debugger/scripts/T27633c.stdout - + testsuite/tests/ghci.debugger/scripts/T27633c_obj.hs - testsuite/tests/ghci.debugger/scripts/all.T - + testsuite/tests/ghci/prog-mhu007/Makefile - + testsuite/tests/ghci/prog-mhu007/a/A.hs - + testsuite/tests/ghci/prog-mhu007/all.T - + testsuite/tests/ghci/prog-mhu007/b/B.hs - + testsuite/tests/ghci/prog-mhu007/prog-mhu007.script - + testsuite/tests/ghci/prog-mhu007/prog-mhu007.stdout - + testsuite/tests/ghci/prog-mhu007/testpkg-bar/Bar.hs - + testsuite/tests/ghci/prog-mhu007/testpkg-bar/testpkg-bar.pkg - + testsuite/tests/ghci/prog-mhu007/testpkg-foo/Foo.hs - + testsuite/tests/ghci/prog-mhu007/testpkg-foo/testpkg-foo.pkg - + testsuite/tests/ghci/prog-mhu007/unitA - + testsuite/tests/ghci/prog-mhu007/unitB - + testsuite/tests/ghci/prog-mhu008/Makefile - + testsuite/tests/ghci/prog-mhu008/a/M.hs - + testsuite/tests/ghci/prog-mhu008/all.T - + testsuite/tests/ghci/prog-mhu008/b/M.hs - + testsuite/tests/ghci/prog-mhu008/prog-mhu008.script - + testsuite/tests/ghci/prog-mhu008/prog-mhu008.stdout - + testsuite/tests/ghci/prog-mhu008/unitA - + testsuite/tests/ghci/prog-mhu008/unitB - + testsuite/tests/ghci/scripts/T27641.script - + testsuite/tests/ghci/scripts/T27641.stderr - + testsuite/tests/ghci/scripts/T27641.stdout - + testsuite/tests/ghci/scripts/T27834.hs - + testsuite/tests/ghci/scripts/T27834.script - + testsuite/tests/ghci/scripts/T27834.stdout - testsuite/tests/ghci/scripts/all.T - testsuite/tests/haddock/should_compile_flag_haddock/T17544.stderr - testsuite/tests/haddock/should_compile_flag_haddock/T17544_kw.stderr - testsuite/tests/haddock/should_compile_flag_haddock/T24221.stderr - + testsuite/tests/indexed-types/should_run/T27331.hs - + testsuite/tests/indexed-types/should_run/T27331.stdout - + testsuite/tests/indexed-types/should_run/T27331b.hs - + testsuite/tests/indexed-types/should_run/T27331b.stdout - + testsuite/tests/indexed-types/should_run/T27331b_Plugin.hs - testsuite/tests/indexed-types/should_run/all.T - testsuite/tests/interface-stability/base-exports.stdout - testsuite/tests/interface-stability/base-exports.stdout-javascript-unknown-ghcjs - testsuite/tests/interface-stability/base-exports.stdout-mingw32 - testsuite/tests/interface-stability/ghc-experimental-exports.stdout - testsuite/tests/interface-stability/ghc-experimental-exports.stdout-mingw32 - testsuite/tests/interface-stability/ghc-prim-exports.stdout - testsuite/tests/interface-stability/ghc-prim-exports.stdout-mingw32 - + testsuite/tests/javascript/T27788.hs - + testsuite/tests/javascript/T27788.stdout - testsuite/tests/javascript/all.T - testsuite/tests/linters/notes.stdout - testsuite/tests/module/mod185.stderr - testsuite/tests/parser/should_compile/DumpParsedAst.stderr - testsuite/tests/parser/should_compile/DumpParsedAstComments.stderr - testsuite/tests/parser/should_compile/DumpRenamedAst.stderr - testsuite/tests/parser/should_compile/DumpSemis.stderr - testsuite/tests/parser/should_compile/KindSigs.stderr - testsuite/tests/parser/should_compile/T15279.stderr - testsuite/tests/parser/should_compile/T15323.stderr - testsuite/tests/parser/should_compile/T20452.stderr - testsuite/tests/parser/should_compile/T20718.stderr - testsuite/tests/parser/should_compile/T20718b.stderr - testsuite/tests/parser/should_compile/T20846.stderr - testsuite/tests/parser/should_compile/T23315/T23315.stderr - + testsuite/tests/patsyn/should_compile/T27744.hs - testsuite/tests/patsyn/should_compile/all.T - + testsuite/tests/perf/compiler/T25763.stderr - testsuite/tests/perf/compiler/all.T - testsuite/tests/perf/compiler/large-project/all.T - testsuite/tests/perf/should_run/T3586.hs - testsuite/tests/perf/should_run/T3586.stdout - testsuite/tests/perf/space_leaks/all.T - testsuite/tests/plugins/defaulting-plugin/DefaultLifted.hs - + testsuite/tests/primops/should_run/T27299.hs - + testsuite/tests/primops/should_run/T27299.stdout - testsuite/tests/primops/should_run/all.T - testsuite/tests/printer/AnnotationNoListTuplePuns.stdout - + testsuite/tests/printer/Haddock1.hs - testsuite/tests/printer/Makefile - testsuite/tests/printer/T18791.stderr - + testsuite/tests/printer/T27423c.hs - testsuite/tests/printer/Test20297.stdout - testsuite/tests/printer/Test24533.stdout - testsuite/tests/printer/all.T - testsuite/tests/rename/should_fail/RnStaticPointersFail01.stderr - testsuite/tests/rename/should_fail/RnStaticPointersFail03.stderr - testsuite/tests/rename/should_fail/T26545.stderr - + testsuite/tests/rts/T27477.hs - + testsuite/tests/rts/T27477.stdout - + testsuite/tests/rts/T27618.hs - + testsuite/tests/rts/T27618.stdout - + testsuite/tests/rts/T27649.hs - + testsuite/tests/rts/T27649.stdout - testsuite/tests/rts/all.T - + testsuite/tests/rts/continuations/T27651.hs - + testsuite/tests/rts/continuations/T27651.stdout - testsuite/tests/rts/continuations/all.T - testsuite/tests/rts/rtsflags001.stderr-ws-32 - testsuite/tests/rts/rtsflags001.stderr-ws-64 - + testsuite/tests/simd/should_run/T27565.hs - + testsuite/tests/simd/should_run/T27565.stdout - testsuite/tests/simd/should_run/all.T - testsuite/tests/simplCore/should_compile/Makefile - testsuite/tests/simplCore/should_compile/T17966.stderr - + testsuite/tests/simplCore/should_compile/T27556.hs - + testsuite/tests/simplCore/should_compile/T27556.script - + testsuite/tests/simplCore/should_compile/T27629.hs - + testsuite/tests/simplCore/should_compile/T27629.stderr - + testsuite/tests/simplCore/should_compile/T27629Plugin.hs - + testsuite/tests/simplCore/should_compile/T27749.hs - + testsuite/tests/simplCore/should_compile/T27749.stderr - testsuite/tests/simplCore/should_compile/T7785.stderr - + testsuite/tests/simplCore/should_compile/T7803.hs - + testsuite/tests/simplCore/should_compile/T7803.stderr - + testsuite/tests/simplCore/should_compile/T7803a.hs - testsuite/tests/simplCore/should_compile/all.T - testsuite/tests/simplCore/should_compile/spec004.hs - testsuite/tests/simplCore/should_compile/spec004.stderr - + testsuite/tests/simplCore/should_run/T27703/Lib.hs - + testsuite/tests/simplCore/should_run/T27703/Main.hs - + testsuite/tests/simplCore/should_run/T27703/T27703.stdout - + testsuite/tests/simplCore/should_run/T27703/all.T - + testsuite/tests/simplCore/should_run/T27705.hs - + testsuite/tests/simplCore/should_run/T27705.stdout - + testsuite/tests/simplCore/should_run/T27705_Inst.hs - testsuite/tests/simplCore/should_run/all.T - testsuite/tests/splice-imports/SI35.hs - testsuite/tests/th/T17380.stderr - testsuite/tests/th/T18612.stderr - + testsuite/tests/th/T27034.hs - + testsuite/tests/th/T27034.stderr - testsuite/tests/th/T8761.stderr - testsuite/tests/th/all.T - + testsuite/tests/type-data/should_fail/T27732a.hs - + testsuite/tests/type-data/should_fail/T27732a.stderr - + testsuite/tests/type-data/should_fail/T27732b.hs - + testsuite/tests/type-data/should_fail/T27732b.stderr - + testsuite/tests/type-data/should_fail/T27732c.hs - + testsuite/tests/type-data/should_fail/T27732c.stderr - + testsuite/tests/type-data/should_fail/T27732d.hs - + testsuite/tests/type-data/should_fail/T27732d.stderr - + testsuite/tests/type-data/should_fail/T27732e.hs - + testsuite/tests/type-data/should_fail/T27732e.stderr - + testsuite/tests/type-data/should_fail/T27732f.hs - + testsuite/tests/type-data/should_fail/T27732f.stderr - testsuite/tests/type-data/should_fail/TDStrictnessGADT.stderr - testsuite/tests/type-data/should_fail/TDStrictnessH98.stderr - testsuite/tests/type-data/should_fail/all.T - + testsuite/tests/typecheck/should_compile/T27664.hs - testsuite/tests/typecheck/should_compile/all.T - + testsuite/tests/warnings/should_compile/T16836a.hs - + testsuite/tests/warnings/should_compile/T16836a.stderr - + testsuite/tests/warnings/should_compile/T16836b.hs - + testsuite/tests/warnings/should_compile/T16836c.hs - + testsuite/tests/warnings/should_compile/T16836c.stderr - + testsuite/tests/warnings/should_compile/T16836d.hs - + testsuite/tests/warnings/should_compile/T16836d.stderr - testsuite/tests/warnings/should_compile/all.T - + testsuite/tests/warnings/should_fail/WExpectedNoArgError.stderr - testsuite/tests/warnings/should_fail/all.T - utils/check-exact/ExactPrint.hs - utils/check-exact/Main.hs - utils/check-exact/Parsers.hs - utils/check-exact/Transform.hs - utils/check-exact/Utils.hs - utils/check-ppr/Main.hs - utils/deriveConstants/Main.hs - utils/ghc-toolchain/src/GHC/Toolchain/Program.hs - utils/ghc-toolchain/src/GHC/Toolchain/Target.hs - utils/haddock/haddock-api/src/Haddock/Backends/Hoogle.hs - utils/haddock/haddock-api/src/Haddock/Convert.hs - utils/haddock/haddock-api/src/Haddock/GhcUtils.hs - utils/haddock/haddock-api/src/Haddock/Interface.hs - utils/haddock/haddock-api/src/Haddock/Interface/Rename.hs - utils/haddock/haddock-api/src/Haddock/Types.hs - utils/hsc2hs - utils/jsffi/dyld.mjs The diff was not included because it is too large. View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/bda147c2e259e1451fc1c14e0ddf88c... -- View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/bda147c2e259e1451fc1c14e0ddf88c... You're receiving this email because of your account on gitlab.haskell.org. Manage all notifications: https://gitlab.haskell.org/-/profile/notifications | Help: https://gitlab.haskell.org/help