Andreas Klebinger pushed to branch wip/apk/unfold-dicts at Glasgow Haskell Compiler / GHC Commits: 098bba70 by Facundo Domínguez at 2026-09-17T14:57:41-04:00 Remove the call to hoistFlag from processCmdLineP This call was undesirable because it was causing a reconstruction of the list of flag processors. Even relying on list fusion would not be sufficient because we want to replace the list with a data structure with faster lookups to address #25763. The removal is done in two moves: * We move CmdLineP to CmdLine.hs * Then we move the effect of hoisting to processArgs via a new function hoistEwM - - - - - e01799c7 by Facundo Domínguez at 2026-09-17T14:57:42-04:00 Do not create duplicate flag processors for the -W flag This makes simpler implementing the command line parser with a trie map holding flag processors. If we were to allow duplicate flag processors for any flag, the trie map would need to be a multimap. - - - - - 3875b257 by Facundo Domínguez at 2026-09-17T14:57:42-04:00 Replace the list of flag processors with a trie map in `processArgs` Previously `GHC.Driver.CmdLine.findArg` was called for each command-line argument, doing a linear search on the list of flag processors each time. This was somewhat costly as the list of flag processor has near 2000 elements. A lookup with a trie map is faster in general, but the speed up is only noticeable when calling `GHC.Driver.CmdLine.processArgs` sufficient times, so the amount of lookups piles up. This could happen in large projects with many units each having many dependencies. If only a module needs to be recompiled, the user still needs to wait for all of the flag parsing to complete. The benchmark at testsuite/tests/perf/compiler/cmdline-parser shows a 10x speed up when using the trie. The trie map is implemented in `GHC.Data.StringTrie`. The design is explained in Note [Processing command line argument fast] in GHC.Driver.Session. The commit also: * adds two property-based tests for trie map operations, * adds a benchmark of the command line parser, and * renames the predicate `arg_ok` to `valid_flag_suffix` to decide what flag processor should be used when there are multiple matching prefixes on a flag. Fixes #25763. - - - - - 5236634a by Andreas Klebinger at 2026-09-17T14:58:24-04:00 Compile Word64{Map,Set} with -O2 always. This is the hottest code and even if we build GHC with -O0 otherwise -O2 pays off for these modules. Fixes #27814. - - - - - 545fd4fb by ARATA Mizuki at 2026-09-22T15:03:24-04:00 Change the C types of hs_{bitrev,bswap}{16,32} to match the Haskell types bitReverse{16,32}# and byteSwap{16,32}# have the type Word# -> Word#, but their C correspondents took and returned StgWord{16,32}. The mismatch on bitReverse16# led to the problem reported in #27299. Although no similar issue is reported for bitReverse32# and byteSwap{16,32}#, it seemed wise to change them proactively. This commit fixes the mismatch by changing the C type. Fixes #27299 - - - - - bf17f289 by fendor at 2026-09-22T15:04:05-04:00 Don't lose instances from shadowed imported modules with the same name When we look for instances below the current module, we need to check the unit id as well when we check for whether the module is the current module, otherwise we ignore modules we import that have the same name as the import module. Adds regression test. - - - - - 53eead15 by Wolfgang Jeltsch at 2026-09-24T20:12:03-04:00 Correct the documentation of `explicitUnits` Resolves #27787. - - - - - 35bf6f4b by Simon Jakobi at 2026-09-24T20:12:49-04:00 Remove stale specHeader bullet from Note [Don't make fillers for constraint types] The Note said that Specialise.specHeader also calls mkAbsentFiller. abfc224a27c removed that call: the specialiser no longer drops dead arguments at all, see Note [Do not drop dead args from specialisations] in GHC.Core.Opt.Specialise. Assisted-by: Claude Fable 5.1 - - - - - 1abef1ef by Wolfgang Jeltsch at 2026-09-25T17:02:07-04:00 Improve the `mhu-closure` makefile - - - - - a79a68ea by Wolfgang Jeltsch at 2026-09-25T17:02:07-04:00 Make `ghci-multi` hide all unneeded packages - - - - - d6e72450 by Wolfgang Jeltsch at 2026-09-25T17:02:07-04:00 Improve the definition of the home unit closure property - - - - - c9a2766d by Wolfgang Jeltsch at 2026-09-25T17:02:07-04:00 Re-implement the home unit closure check Compared to the previous implementation, the new one has the following advantages: * It is correct. - It distinguishes between units that have the same unit ID but different ABI hashes. - When `-hide-all-packages` is not used, it considers as home unit dependencies also units that are made implicitly available because they are in the package database. * It seems to be faster in usual settings. - In particular, it does not have a preparation phase in which it merges the dependency information from all home units, so that its running time does not grow linearly with the size of the package database in normal Cabal scenarios. * It is (hopefully) clearer. * It is better documented. - - - - - fa96acf8 by Wolfgang Jeltsch at 2026-09-25T17:02:07-04:00 Remove erroneous GHC flag in `hadrian-multi` The flag was `-Werror=-Wno-error=incomplete-record-selectors`. Its purpose was to permit incomplete record selectors, but because of the illegal combination of `-Werror=` and `-Wno-error` it was ignored, without any negative consequences. - - - - - 9f48a5b9 by Alan Zimmerman at 2026-09-25T17:02:50-04:00 EPA: Add specific layout field to AnnList Up to now AnnList has effectively served to represent lists of things having layout, regardless of whether they do or not. In Haskell, layout is optional in many places, as there is also an alternative syntax using braces and semi-colons, which is free-form. This commit introduces AnnListLayout, a data structure capturing this distinction. It is deliberately set up similarly to EpLayout, so that these two can be merged in time. The transition is done mechanically, where AnnListBraces is not used yet, the original Nothing case maps to AnnListNoLayout, and the Just case to AnnListLayout. Later commits will fine tune these against the actual parser layout. - - - - - 5cdafca2 by Andreas Klebinger at 2026-09-29T17:50:24+00:00 Tweak inlining discout for unary class ops. Correctly account for arguments applied to the result of the class op application when computing rhs size for unary classes. I also fixed handling of casts/ticks while in the area. Fixes #27802 Fixes #27818 ------------------------- Metric Decrease: CoOpt_Singletons Metric Increase: T12234 T21839c T21839r T5321FD T5321Fun ------------------------- - - - - - 66 changed files: - .gitlab-ci.yml - + changelog.d/25763-cmdline-opt - + changelog.d/26610 - + changelog.d/T27802-classop-arg-size - + changelog.d/T27818-unfolding-size-casts-ticks - compiler/GHC/Core/Opt/WorkWrap/Utils.hs - compiler/GHC/Core/Unfold.hs - + compiler/GHC/Data/StringTrie.hs - compiler/GHC/Data/Word64Map/Internal.hs - compiler/GHC/Data/Word64Map/Strict/Internal.hs - compiler/GHC/Data/Word64Set/Internal.hs - compiler/GHC/Driver/CmdLine.hs - compiler/GHC/Driver/Downsweep.hs - compiler/GHC/Driver/Env.hs - compiler/GHC/Driver/Errors/Ppr.hs - compiler/GHC/Driver/Errors/Types.hs - compiler/GHC/Driver/Session.hs - compiler/GHC/Parser.y - compiler/GHC/Parser/Annotation.hs - compiler/GHC/Parser/PostProcess.hs - compiler/GHC/Unit/Env.hs - compiler/GHC/Unit/State.hs - compiler/ghc.cabal.in - ghc/GHC/Driver/Session/Mode.hs - hadrian/ghci-multi-cabal.in - rts/include/stg/Prim.h - rts/prim/bitrev.c - rts/prim/bswap.c - testsuite/tests/MiniQuickCheck.hs - testsuite/tests/driver/all.T - testsuite/tests/driver/multipleHomeUnits/mhu-closure/Makefile - testsuite/tests/driver/multipleHomeUnits/mhu-closure/mhu-closure.stderr - testsuite/tests/driver/multipleHomeUnits/mhu-closure/mhu-closure.stdout - + testsuite/tests/driver/stringtrie.hs - + testsuite/tests/driver/stringtrie.stdout - testsuite/tests/ghc-api/exactprint/T22919.stderr - testsuite/tests/ghc-api/exactprint/ZeroWidthSemi.stderr - + testsuite/tests/ghci/prog-mhu008/Makefile - + testsuite/tests/ghci/prog-mhu008/a/M.hs - + testsuite/tests/ghci/prog-mhu008/all.T - + testsuite/tests/ghci/prog-mhu008/b/M.hs - + testsuite/tests/ghci/prog-mhu008/prog-mhu008.script - + testsuite/tests/ghci/prog-mhu008/prog-mhu008.stdout - + testsuite/tests/ghci/prog-mhu008/unitA - + testsuite/tests/ghci/prog-mhu008/unitB - testsuite/tests/module/mod185.stderr - testsuite/tests/parser/should_compile/DumpParsedAst.stderr - testsuite/tests/parser/should_compile/DumpParsedAstComments.stderr - testsuite/tests/parser/should_compile/DumpRenamedAst.stderr - testsuite/tests/parser/should_compile/DumpSemis.stderr - testsuite/tests/parser/should_compile/KindSigs.stderr - testsuite/tests/parser/should_compile/T15279.stderr - testsuite/tests/parser/should_compile/T20718.stderr - testsuite/tests/parser/should_compile/T20846.stderr - + testsuite/tests/perf/compiler/T25763.stderr - testsuite/tests/perf/compiler/all.T - + testsuite/tests/primops/should_run/T27299.hs - + testsuite/tests/primops/should_run/T27299.stdout - testsuite/tests/primops/should_run/all.T - testsuite/tests/printer/Test20297.stdout - testsuite/tests/printer/Test24533.stdout - + testsuite/tests/warnings/should_fail/WExpectedNoArgError.stderr - testsuite/tests/warnings/should_fail/all.T - utils/check-exact/ExactPrint.hs - utils/check-exact/Main.hs - utils/check-exact/Transform.hs The diff was not included because it is too large. View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/aed7066985d8cea9c236ac95c98e6f0... -- View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/aed7066985d8cea9c236ac95c98e6f0... You're receiving this email because of your account on gitlab.haskell.org. Manage all notifications: https://gitlab.haskell.org/-/profile/notifications | Help: https://gitlab.haskell.org/help