Bodigrim pushed to branch wip/warning-for-last-and-init at Glasgow Haskell Compiler / GHC Commits: ca03226d by Ben Gamari at 2025-08-18T13:43:20+00:00 configure: Allow use of LLVM 20 - - - - - 783cd7d6 by Cheng Shao at 2025-08-18T20:13:14-04:00 compiler: use `UniqMap` instead of `Map` for `BCEnv` in bytecode compiler The bytecode compiler maintains a `BCEnv` which was previously `Map Id StackDepth`. Given `Id` is `Uniquable`, we might as well use `UniqMap` here as a more efficient data structure, hence this patch. Co-authored-by: Codex - - - - - 58e46da9 by fendor at 2025-08-18T20:13:56-04:00 rts: Strip lower three bits when hashing Word instead of lower eight bits - - - - - 45dbfa23 by Cheng Shao at 2025-08-18T20:14:37-04:00 libffi: update to 3.5.2 Bumps libffi submodule. - - - - - 54be78ef by Ben Gamari at 2025-08-19T16:28:05-04:00 testsuite: Fix T20006b This test is supposed to fail for non-threaded ways yet it was previously marked as only failing in `normal`. Fix this. - - - - - f4bac607 by Simon Peyton Jones at 2025-08-19T16:28:47-04:00 Take yet more care with reporting redundant constraints This small patch fixes #25992, which relates to reporting redundant constraints on default-method declarations. See (TRC5) in Note [Tracking redundant constraints] - - - - - ab130fec by fendor at 2025-08-19T16:29:29-04:00 Bump dependencies of hadrian-bootstrap-gen to use GHC 9.6.7 - - - - - 6d02ac6f by fendor at 2025-08-19T16:29:29-04:00 Bump required GHC version for test-bootstrap jobs to 9.10.1 Include test-bootstrap job for GHC 9.12.2. Update hadrian bootstrap plans use GHC 9.10 and 9.12 Remove older GHC bootstrap configurations. We require at least GHC 9.10.1 to build GHC. Adds plans for: * 9.10.1 * 9.10.2 * 9.12.1 * 9.12.2 - - - - - 9e857171 by Brandon Chinn at 2025-08-20T11:47:46-04:00 Don't warn unused-imports with used generated imports Fixes #21730 * The old notion of "implicit" import has been renamed to "generated". See Note [Generated imports] in GHC.Hs.ImpExp. * ImportMap now keeps track of generated and user-written imports separately. This avoids the fake SrcSpan we used to give the implicit Prelude import, and the hack that went with it. * -ddump-minimal-imports now considers generated imports (but still only warns on + prints user-written imports) * bestImport considers generated imports to take priority over user-written imports. - - - - - 9fb3bad4 by Ben Gamari at 2025-08-20T11:48:31-04:00 mailmap: Use ben@well-typed.com more liberally Nearly all of this work was done while working for Well-Typed. - - - - - 774fec37 by Ben Gamari at 2025-08-20T11:49:15-04:00 Add primop to annotate the call stack with arbitrary data We introduce a new primop `annotateStack#` which allows us to push arbitrary data onto the call-stack. This allows us to extract the data later when decoding the stack, for example when an exception is thrown, showing more information to the user without having to annotate the full call-stack with `HasCallStack` constraints. A new stack frame value is introduced `AnnFrame`, which consists of nothing but a generic payload. The primop has a small wrapper API that allows users to annotate their call-stack in programs. There is a pure API and an IO-based one. The former is a little bit dubious, as it affects the evaluation of a program, so use with care. The latter is "safe", as it doesn't change the evaluation of the program. The stack annotation mechanism is similarly implemented to the `ExceptionAnnotation` and `Exception`, there is a typeclass to indicate something can be pushed onto the call-stack and all values are wrapped in the existential `SomeStackAnnotation`, which recover the type of the annotation payload. There is currently no builtin way to show the stack annotations when `Backtraces` are displayed (i.e., when showing stack traces to the user), which we will address in a follow-up MR. ------------------------- Metric Increase: ghc_experimental_so ------------------------- We increase the size of the package, so this is not unreasonable. Co-Authored-By: fendor Co-Authored-By: Ben Gamari - - - - - fdfa3892 by Ben Gamari at 2025-08-20T11:49:57-04:00 testsuite: Add regression test for #24606 - - - - - 39b2e382 by Cheng Shao at 2025-08-20T11:50:40-04:00 compiler: only use `Name` instead of `Id` in `SptEntry` As a part of #26298, this patch refactors `SptEntry` to only carry a `Name` instead of `Id`: we do not care about extra information like caffyness or type at all in any static pointer related codegen logic. This is necessary to make `SptEntry` serializable, as a part of the grand plan of serializable bytecode. Co-authored-by: Codex - - - - - 276f8ea8 by Vekhir -- at 2025-08-20T11:51:35-04:00 Bump Cabal dependency - - - - - 0b9c7437 by Zubin Duggal at 2025-08-20T11:52:18-04:00 ci: Teach ci.sh to fetch FreeBSD artifacts from ghcup unofficial bindists and bootstrap compiler on FreeBSD to 9.10.1 Also refactor fetch_ghc logic in ci.sh, renaming the GHC_VERSION enviorment configuration variable to FETCH_GHC_VERSION, making it clear that it is intended for use on platforms like Windows and FreeBSD where we don't want to use the GHC excecutable from the platform environment and instead need to download and install GHC-$FETCH_GHC_VERSION from a release bindist. Fixes #26296 - - - - - b2914797 by Cheng Shao at 2025-08-20T11:53:00-04:00 driver: use UniqSet for hiddenModules in DynFlags/FinderOpts This patch replaces Set ModuleName with UniqSet ModuleName in DynFlags.hiddenModules and FinderOpts.finder_hiddenModules for improved efficiency. Co-authored-by: Codex - - - - - 0335d899 by Cheng Shao at 2025-08-20T11:53:00-04:00 driver: use UniqMap ModuleName in the finder This patch replaces Map ModuleName with UniqMap ModuleName in the finder for improved efficiency. Co-authored-by: Codex - - - - - 91f4faaa by Cheng Shao at 2025-08-20T11:53:43-04:00 configure: check python3 version and require minimal 3.7 Since !9515, the testsuite driver requires python3 version to be at least 3.7, though this has never been checked by configure logic. This patch implements the version check. Fixes #23234. Co-authored-by: Codex - - - - - df4ee9b4 by Cheng Shao at 2025-08-20T11:54:25-04:00 compiler: use zero cost coerce in GHC.CmmToAsm.CFG.loopInfo This patch refactors GHC.CmmToAsm.CFG.loopInfo to use zero cost coerce and thus addresses the TODO. For coerce to work, constructors of Label/LabelMap/LabelSet from GHC.Cmm.Dataflow.Label are exposed, though I believe it's a worthy tradeoff to avoid unnecessary runtime cost without using unsafeCoerce, since the latter could be a landmine for future refactoring. Co-authored-by: Codex - - - - - ccda188d by Simon Peyton Jones at 2025-08-20T11:55:07-04:00 Start with empty inerts in shortcut solving When short-cut solving we were starting with an inert set that had unsolved Wanteds. This caused an infinite loop (#26314), because a typechecker plugin kept being given that unsolved Wanted. It's better just to start with an empty inert set - - - - - c8882ed7 by Ben Gamari at 2025-08-20T11:55:49-04:00 configure: Bump minimal bootstrap GHC version to 9.8 - - - - - f0a19d74 by fendor at 2025-08-20T19:55:00-04:00 Remove deprecated functions from the ghci package - - - - - ebeb991b by fendor at 2025-08-20T19:55:00-04:00 base: Remove unstable heap representation details from GHC.Exts - - - - - e368e247 by Rodrigo Mesquita at 2025-08-20T19:55:42-04:00 bytecode: Use 32bits for breakpoint index Fixes #26325 - - - - - 42724462 by Simon Hengel at 2025-08-21T17:52:11-04:00 Serialize wired-in names as external names when creating HIE files Note that the domain of de-serialized names stays the same. Specifically, for known-key names, before `lookupKnownKeyName` was used, while now this is handled by `lookupOrigNameCache` which captures the same range provided that the OrigNameCache has been initialized with `knownKeyNames` (which is the case by default). (fixes #26238) - - - - - 6a43f8ec by Cheng Shao at 2025-08-21T17:52:52-04:00 compiler: fix closure C type in SPT init code This patch fixes the closure C type in SPT init code to StgClosure, instead of the previously incorrect StgPtr. Having an incorrect C type makes SPT init code not compatible with other foreign stub generation logic, which may also emit their own extern declarations for the same closure symbols and thus will clash with the incorrect prototypes in SPT init code. - - - - - 5b5d9d47 by Ben Gamari at 2025-08-25T14:29:35-04:00 Revert "STM: don't create a transaction in the rhs of catchRetry# (#26028)" This reverts commit 0a5836891ca29836a24c306d2a364c2e4b5377fd - - - - - 10f06163 by Cheng Shao at 2025-08-25T14:30:16-04:00 wasm: ensure setKeepCAFs() is called in ghci This patch is a critical bugfix for #26106, see comment and linked issue for details. - - - - - bedc1004 by Cheng Shao at 2025-08-26T09:31:18-04:00 compiler: use zero cost coerce in hoopl setElems/mapToList This patch is a follow-up of !14680 and changes setElems/mapToList in GHC/Cmm/Dataflow/Label to use coerce instead of mapping mkHooplLabel over the keys. - - - - - 13250d97 by Ryan Scott at 2025-08-26T09:31:59-04:00 Reject infix promoted data constructors without DataKinds In the rename, make sure to apply the same `DataKinds` checks for both `HsTyVar` (for prefix promoted data constructors) and `HsOpTy` (for infix promoted data constructors) alike. Fixes #26318. - - - - - 37655c46 by Teo Camarasu at 2025-08-26T15:24:51-04:00 tests: disable T22859 under LLVM This test was failing under the LLVM backend since the allocations differ from the NCG. Resolves #26282 - - - - - 2cbba9d6 by Teo Camarasu at 2025-08-26T15:25:33-04:00 base-exports: update version numbers As the version of the compiler has been bumped, a lot of the embedded version numbers will need to be updated if we ever run this test with `--test-accept` so let's just update them now, and keep future diffs clean. - - - - - f9f2ffcf by Alexandre Esteves at 2025-08-27T07:19:14-04:00 Import new name for 'utimbuf' on windows to fix #26337 Fixes an `-Wincompatible-pointer-types` instance that turns into an error on recent toolchains and surfaced as such on nixpkgs when doing linux->ucrt cross. This long-standing warning has been present at least since 9.4: ``` C:\GitLabRunner\builds\0\1709189\tmp\ghc16652_0\ghc_4.c:26:115: error: warning: incompatible pointer types passing 'struct utimbuf *' to parameter of type 'struct _utimbuf *' [-Wincompatible-pointer-types] | 26 | HsInt32 ghczuwrapperZC9ZCbaseZCSystemziPosixziInternalsZCzuutime(char* a1, struct utimbuf* a2) {return _utime(a1, a2);} | ^ HsInt32 ghczuwrapperZC9ZCbaseZCSystemziPosixziInternalsZCzuutime(char* a1, struct utimbuf* a2) {return _utime(a1, a2);} ^~ C:\GitLabRunner\builds\0\1709189\_build\stage0\lib\..\..\mingw\x86_64-w64-mingw32\include\sys\utime.h:109:72: error: note: passing argument to parameter '_Utimbuf' here | 109 | __CRT_INLINE int __cdecl _utime(const char *_Filename,struct _utimbuf *_Utimbuf) { | ^ __CRT_INLINE int __cdecl _utime(const char *_Filename,struct _utimbuf *_Utimbuf) { ``` - - - - - ae89f000 by Hassan Al-Awwadi at 2025-08-27T07:19:56-04:00 Adds the fucnction addDependentDirectory to Q, resolving issue #26148. This function adds a new directory to the list of things a module depends upon. That means that when the contents of the directory change, the recompilation checker will notice this and the module will be recompiled. Documentation has also been added for addDependentFunction and addDependentDirectory in the user guide. - - - - - 00478944 by Simon Peyton Jones at 2025-08-27T16:48:30+01:00 Comments only - - - - - a7884589 by Simon Peyton Jones at 2025-08-28T11:08:23+01:00 Type-family occurs check in unification The occurs check in `GHC.Core.Unify.uVarOrFam` was inadequate in dealing with type families. Better now. See Note [The occurs check in the Core unifier]. As I did this I realised that the whole apartness thing is trickier than I thought: see the new Note [Shortcomings of the apartness test] - - - - - 8adfc222 by sheaf at 2025-08-28T19:47:17-04:00 Fix orientation in HsWrapper composition (<.>) This commit fixes the order in which WpCast HsWrappers are composed, fixing a bug introduced in commit 56b32c5a2d5d7cad89a12f4d74dc940e086069d1. Fixes #26350 - - - - - eb2ab1e2 by Oleg Grenrus at 2025-08-29T11:00:53-04:00 Generalise thNameToGhcName by adding HasHscEnv There were multiple single monad-specific `getHscEnv` across codebase. HasHscEnv is modelled on HasDynFlags. My first idea was to simply add thNameToGhcNameHsc and thNameToGhcNameTc, but those would been exactly the same as thNameToGhcName already. Also add an usage example to thNameToGhcName and mention that it's recommended way of looking up names in GHC plugins - - - - - 2d575a7f by fendor at 2025-08-29T11:01:36-04:00 configure: Bump minimal bootstrap GHC version to 9.10 - - - - - 716274a5 by Simon Peyton Jones at 2025-08-29T17:27:12-04:00 Fix deep subsumption again This commit fixed #26255: commit 56b32c5a2d5d7cad89a12f4d74dc940e086069d1 Author: sheaf Date: Mon Aug 11 15:50:47 2025 +0200 Improve deep subsumption This commit improves the DeepSubsumption sub-typing implementation in GHC.Tc.Utils.Unify.tc_sub_type_deep by being less eager to fall back to unification. But alas it still wasn't quite right for view patterns: #26331 This MR does a generalisation to fix it. A bit of a sledgehammer to crack a nut, but nice. * Add a field `ir_inst :: InferInstFlag` to `InferResult`, where ``` data InferInstFlag = IIF_Sigma | IIF_ShallowRho | IIF_DeepRho ``` * The flag says exactly how much `fillInferResult` should instantiate before filling the hole. * We can also use this to replace the previous very ad-hoc `tcInferSigma` that was used to implement GHCi's `:type` command. - - - - - 27206c5e by sheaf at 2025-08-29T17:28:14-04:00 Back-compat for TH SpecialiseP data-con of Pragma This commit improves the backwards-compatibility story for the SpecialiseP constructor of the Template Haskell 'Pragma' datatype. Instead of keeping the constructor but deprecating it, this commit makes it into a bundled pattern synonym of the Pragma datatype. We no longer deprecate it; it's useful for handling old-form specialise pragmas. - - - - - 26dbcf61 by fendor at 2025-08-30T05:10:08-04:00 Move stack decoding logic from ghc-heap to ghc-internal The stack decoding logic in `ghc-heap` is more sophisticated than the one currently employed in `CloneStack`. We want to use the stack decoding implementation from `ghc-heap` in `base`. We cannot simply depend on `ghc-heap` in `base` due do bootstrapping issues. Thus, we move the code that is necessary to implement stack decoding to `ghc-internal`. This is the right location, as we don't want to add a new API to `base`. Moving the stack decoding logic and re-exposing it in ghc-heap is insufficient, though, as we have a dependency cycle between. * ghc-heap depends on stage1:ghc-internal * stage0:ghc depends on stage0:ghc-heap To fix this, we remove ghc-heap from the set of `stage0` dependencies. This is not entirely straight-forward, as a couple of boot dependencies, such as `ghci` depend on `ghc-heap`. Luckily, the boot compiler of GHC is now >=9.10, so we can migrate `ghci` to use `ghc-internal` instead of `ghc-heap`, which already exports the relevant modules. However, we cannot 100% remove ghc's dependency on `ghc-heap`, since when we compile `stage0:ghc`, `stage1:ghc-internal` is not yet available. Thus, when we compile with the boot-compiler, we still depend on an older version of `ghc-heap`, and only use the modules from `ghc-internal`, if the `ghc-internal` version is recent enough. ------------------------- Metric Increase: T24602_perf_size T25046_perf_size_gzip T25046_perf_size_unicode T25046_perf_size_unicode_gzip size_hello_artifact size_hello_artifact_gzip size_hello_unicode size_hello_unicode_gzip ------------------------- These metric increases are unfortunate, they are most likely caused by the larger (literally in terms of lines of code) stack decoder implementation that are now linked into hello-word binaries. On linux, it is almost a 10% increase, which is considerable. - - - - - bd80bb70 by fendor at 2025-08-30T05:10:08-04:00 Implement `decode` in terms of `decodeStackWithIpe` Uses the more efficient stack decoder implementation. - - - - - 24441165 by fendor at 2025-08-30T05:10:08-04:00 Remove stg_decodeStackzh - - - - - fb9cc882 by Simon Peyton Jones at 2025-08-30T05:10:51-04:00 Fix a long standing bug in the coercion optimiser We were mis-optimising ForAllCo, leading to #26345 Part of the poblem was the tricky tower of abstractions leading to the dreadful GHC.Core.TyCo.Subst.substForAllCoTyVarBndrUsing This function was serving two masters: regular substitution, but also coercion optimsation. So tricky was it that it did so wrong. In this MR I locate all the fancy footwork for coercion optimisation in GHC.Core.Coercion.Opt, where it belongs. That leaves substitution free to be much simpler. - - - - - 6c78de2d by Sylvain Henry at 2025-09-01T08:46:19-04:00 Driver: substitute virtual Prim module in --make mode too When we build ghc-internal with --make (e.g. with cabal-install), we need to be careful to substitute the virtual interface file for GHC.Internal.Prim: - after code generation (we generate code for an empty module, so we get an empty interface) - when we try to reload its .hi file - - - - - 26e0db16 by fendor at 2025-09-01T08:47:01-04:00 Expose Stack Annotation frames in IPE backtraces by default When decoding the Haskell-native call stack and displaying the IPE information for the stack frames, we print the `StackAnnotation` of the `AnnFrame` by default. This means, when an exception is thrown, any intermediate stack annotations will be displayed in the `IPE Backtrace`. Example backtrace: ``` Exception: ghc-internal:GHC.Internal.Exception.ErrorCall: Oh no! IPE backtrace: annotateCallStackIO, called at app/Main.hs:48:10 in backtrace-0.1.0.0-inplace-server:Main annotateCallStackIO, called at app/Main.hs:46:13 in backtrace-0.1.0.0-inplace-server:Main Main.handler (app/Main.hs:(46,1)-(49,30)) Main.liftIO (src/Servant/Server/Internal/Handler.hs:30:36-42) Servant.Server.Internal.Delayed.runHandler' (src/Servant/Server/Internal/Handler.hs:27:31-41) Control.Monad.Trans.Resource.runResourceT (./Control/Monad/Trans/Resource.hs:(192,14)-(197,18)) Network.Wai.Handler.Warp.HTTP1.processRequest (./Network/Wai/Handler/Warp/HTTP1.hs:195:20-22) Network.Wai.Handler.Warp.HTTP1.processRequest (./Network/Wai/Handler/Warp/HTTP1.hs:(195,5)-(203,31)) Network.Wai.Handler.Warp.HTTP1.http1server.loop (./Network/Wai/Handler/Warp/HTTP1.hs:(141,9)-(157,42)) HasCallStack backtrace: error, called at app/Main.hs:48:32 in backtrace-0.1.0.0-inplace-server:Main ``` The first two entries have been added by `annotateCallStackIO`, defined in `annotateCallStackIO`. - - - - - a1567efd by Sylvain Henry at 2025-09-01T23:01:35-04:00 RTS: rely less on Hadrian for flag setting (#25843) Hadrian used to pass -Dfoo command-line flags directly to build the rts. We can replace most of these flags with CPP based on cabal flags. It makes building boot libraries with cabal-install simpler (cf #25843). - - - - - ca5b0283 by Sergey Vinokurov at 2025-09-01T23:02:23-04:00 Remove unnecessary irrefutable patterns from Bifunctor instances for tuples Implementation of https://github.com/haskell/core-libraries-committee/issues/339 Metric Decrease: mhu-perf - - - - - 2da84b7a by sheaf at 2025-09-01T23:03:23-04:00 Only use active rules when simplifying rule RHSs When we are simplifying the RHS of a rule, we make sure to only apply rewrites from rules that are active throughout the original rule's range of active phases. For example, if a rule is always active, we only fire rules that are themselves always active when simplifying the RHS. Ditto for inline activations. This is achieved by setting the simplifier phase to a range of phases, using the new SimplPhaseRange constructor. Then: 1. When simplifying the RHS of a rule, or of a stable unfolding, we set the simplifier phase to a range of phases, computed from the activation of the RULE/unfolding activation, using the function 'phaseFromActivation'. The details are explained in Note [What is active in the RHS of a RULE?] in GHC.Core.Opt.Simplify.Utils. 2. The activation check for other rules and inlinings is then: does the activation of the other rule/inlining cover the whole phase range set in sm_phase? This continues to use the 'isActive' function, which now accounts for phase ranges. On the way, this commit also moves the exact-print SourceText annotation from the Activation datatype to the ActivationAnn type. This keeps the main Activation datatype free of any extra cruft. Fixes #26323 - - - - - 79816cc4 by Rodrigo Mesquita at 2025-09-02T12:19:59-04:00 cleanup: Move dehydrateCgBreakInfo to Stg2Bc This no longer has anything to do with Core. - - - - - 53da94ff by Rodrigo Mesquita at 2025-09-02T12:19:59-04:00 rts/Disassembler: Fix spacing of BRK_FUN - - - - - 08c0cf85 by Rodrigo Mesquita at 2025-09-02T12:19:59-04:00 debugger: Fix bciPtr in Step-out We need to use `BCO_NEXT` to move bciPtr to ix=1, because ix=0 points to the instruction itself! I do not understand how this didn't crash before. - - - - - e7e021fa by Rodrigo Mesquita at 2025-09-02T12:19:59-04:00 debugger: Allow BRK_FUNs to head case continuation BCOs When we start executing a BCO, we may want to yield to the scheduler: this may be triggered by a heap/stack check, context switch, or a breakpoint. To yield, we need to put the stack in a state such that when execution is resumed we are back to where we yielded from. Previously, a BKR_FUN could only head a function BCO because we only knew how to construct a valid stack for yielding from one -- simply add `apply_interp_info` + the BCO to resume executing. This is valid because the stack at the start of run_BCO is headed by that BCO's arguments. However, in case continuation BCOs (as per Note [Case continuation BCOs]), we couldn't easily reconstruct a valid stack that could be resumed because we dropped too soon the stack frames regarding the value returned (stg_ret) and received (stg_ctoi) by that continuation. This is especially tricky because of the variable type and size return frames (e.g. pointer ret_p/ctoi_R1p vs a tuple ret_t/ctoi_t2). The trick to being able to yield from a BRK_FUN at the start of a case cont BCO is to stop removing the ret frame headers eagerly and instead keep them until the BCO starts executing. The new layout at the start of a case cont. BCO is described by the new Note [Stack layout when entering run_BCO]. Now, we keep the ret_* and ctoi_* frames when entering run_BCO. A BRK_FUN is then executed if found, and the stack is yielded as-is with the preserved ret and ctoi frames. Then, a case cont BCO's instructions always SLIDE off the headers of the ret and ctoi frames, in StgToByteCode.doCase, turning a stack like | .... | +---------------+ | fv2 | +---------------+ | fv1 | +---------------+ | BCO | +---------------+ | stg_ctoi_ret_ | +---------------+ | retval | +---------------+ | stg_ret_..... | +---------------+ into | .... | +---------------+ | fv2 | +---------------+ | fv1 | +---------------+ | retval | +---------------+ for the remainder of the BCO. Moreover, this more uniform approach of keeping the ret and ctoi frames means we need less ad-hoc logic concerning the variable size of ret_tuple vs ret_p/np frames in the code generator and interpreter: Always keep the return to cont. stack intact at the start of run_BCO, and the statically generated instructions will take care of adjusting it. Unlocks BRK_FUNs at the start of case cont. BCOs which will enable a better user-facing step-out (#26042) which is free of the bugs the current BRK_ALTS implementation suffers from (namely, using BRK_FUN rather than BRK_ALTS in a case cont. means we'll never accidentally end up in a breakpoint "deeper" than the continuation, because we stop at the case cont itself rather than on the first breakpoint we evaluate after it). - - - - - ade3c1e6 by Rodrigo Mesquita at 2025-09-02T12:19:59-04:00 BRK_FUN with InternalBreakLocs for code-generation time breakpoints At the start of a case continuation BCO, place a BRK_FUN. This BRK_FUN uses the new "internal breakpoint location" -- allowing us to come up with a valid source location for this breakpoint that is not associated with a source-level tick. For case continuation BCOs, we use the last tick seen before it as the source location. The reasoning is described in Note [Debugger: Stepout internal break locs]. Note how T26042c, which was broken because it displayed the incorrect behavior of the previous step out when we'd end up at a deeper level than the one from which we initiated step-out, is now fixed. As of this commit, BRK_ALTS is now dead code and is thus dropped. Note [Debugger: Stepout internal break locs] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Step-out tells the interpreter to run until the current function returns to where it was called from, and stop there. This is achieved by enabling the BRK_FUN found on the first RET_BCO frame on the stack (See [Note Debugger: Step-out]). Case continuation BCOs (which select an alternative branch) must therefore be headed by a BRK_FUN. An example: f x = case g x of <--- end up here 1 -> ... 2 -> ... g y = ... <--- step out from here - `g` will return a value to the case continuation BCO in `f` - The case continuation BCO will receive the value returned from g - Match on it and push the alternative continuation for that branch - And then enter that alternative. If we step-out of `g`, the first RET_BCO on the stack is the case continuation of `f` -- execution should stop at its start, before selecting an alternative. (One might ask, "why not enable the breakpoint in the alternative instead?", because the alternative continuation is only pushed to the stack *after* it is selected by the case cont. BCO) However, the case cont. BCO is not associated with any source-level tick, it is merely the glue code which selects alternatives which do have source level ticks. Therefore, we have to come up at code generation time with a breakpoint location ('InternalBreakLoc') to display to the user when it is stopped there. Our solution is to use the last tick seen just before reaching the case continuation. This is robust because a case continuation will thus always have a relevant breakpoint location: - The source location will be the last source-relevant expression executed before the continuation is pushed - So the source location will point to the thing you've just stepped out of - Doing :step-local from there will put you on the selected alternative (which at the source level may also be the e.g. next line in a do-block) Examples, using angle brackets (<<...>>) to denote the breakpoint span: f x = case <<g x>> {- step in here -} of 1 -> ... 2 -> ...> g y = <<...>> <--- step out from here ... f x = < ... 2 -> ...>> doing :step-local ... f x = case g x of 1 -> <<...>> <--- stop in the alternative 2 -> ... A second example based on T26042d2, where the source is a do-block IO action, optimised to a chain of `case expressions`. main = do putStrLn "hello1" <<f>> <--- step-in here putStrLn "hello3" putStrLn "hello4" f = do <> <--- step-out from here putStrLn "hello2.2" ... main = do putStrLn "hello1" <<f>> <--- end up here again, the previously executed expression putStrLn "hello3" putStrLn "hello4" doing step/step-local ... main = do putStrLn "hello1" f <> <--- straight to the next line putStrLn "hello4" Finishes #26042 - - - - - c66910c0 by Rodrigo Mesquita at 2025-09-02T12:19:59-04:00 debugger: Re-use the last BreakpointId whole in step-out Previously, to come up with a location to stop at for `:stepout`, we would store the location of the last BreakpointId surrounding the continuation, as described by Note [Debugger: Stepout internal break locs]. However, re-using just the location from the last source breakpoint isn't sufficient to provide the necessary information in the break location. Specifically, it wouldn't bind any variables at that location. Really, there is no reason not to re-use the last breakpoint wholesale, and re-use all the information we had there. Step-out should behave just as if we had stopped at the call, but s.t. continuing will not re-execute the call. This commit updates the CgBreakInfo to always store a BreakpointId, be it the original one or the one we're emulating (for step-out). It makes variable bindings on :stepout work - - - - - e4abed7b by sheaf at 2025-09-02T12:20:40-04:00 Revert accidental changes to hie.yaml - - - - - 3cb81480 by Mike Pilgrem at 2025-09-03T01:04:51+01:00 Re CLC issue 292 Warn GHC.Internal.List.{init,last} are partial Also corrects the warning for `tail` to refer to `Data.List.uncons` (like the existing warning for `head`). In module `Settings.Warnings`, applies `-Wno-unrecognised-warning-flags` `-Wno-x-partial` to the `Cabal`, `filepath`, `hsc2hs`, `hpc`, `parsec`, `text` and `time` packages (outside GHC's repository). Also bumps submodules. - - - - - de27ecc3 by Andrew Lelechenko at 2025-09-03T01:04:51+01:00 Wibble - - - - - 2d011c75 by Andrew Lelechenko at 2025-09-03T01:04:51+01:00 Wobble - - - - - 8b288646 by Andrew Lelechenko at 2025-09-03T01:04:51+01:00 Revert GHC.Internal.System.IO - - - - - a51f729b by Andrew Lelechenko at 2025-09-03T01:04:51+01:00 Revert GHC.Core.Utils - - - - - 8a29cf0b by Andrew Lelechenko at 2025-09-03T01:04:51+01:00 Revert template-haskell - - - - - b13b6fd2 by Andrew Lelechenko at 2025-09-03T01:04:51+01:00 Revert filepath - - - - - 77758540 by Andrew Lelechenko at 2025-09-03T01:04:51+01:00 Revert ghc-boot-th - - - - - 9a49e149 by Andrew Lelechenko at 2025-09-03T01:04:51+01:00 Revert submodules - - - - - 35d6806d by Andrew Lelechenko at 2025-09-03T01:04:51+01:00 Revert utils - - - - - 6b7f4e13 by Andrew Lelechenko at 2025-09-03T01:05:34+01:00 Revert filepath - - - - - 354 changed files: - .gitlab-ci.yml - .gitlab/ci.sh - .gitlab/generate-ci/gen_ci.hs - .gitlab/jobs.yaml - .mailmap - compiler/GHC/Builtin/primops.txt.pp - compiler/GHC/ByteCode/Asm.hs - compiler/GHC/ByteCode/Breakpoints.hs - compiler/GHC/ByteCode/Instr.hs - compiler/GHC/ByteCode/Types.hs - compiler/GHC/Cmm/Dataflow/Label.hs - compiler/GHC/CmmToAsm/CFG.hs - compiler/GHC/Core/Coercion.hs - compiler/GHC/Core/Coercion/Opt.hs - compiler/GHC/Core/Opt/Monad.hs - compiler/GHC/Core/Opt/Pipeline/Types.hs - compiler/GHC/Core/Opt/Simplify/Env.hs - compiler/GHC/Core/Opt/Simplify/Inline.hs - compiler/GHC/Core/Opt/Simplify/Iteration.hs - compiler/GHC/Core/Opt/Simplify/Utils.hs - compiler/GHC/Core/Opt/Specialise.hs - compiler/GHC/Core/Opt/WorkWrap.hs - compiler/GHC/Core/Rules.hs - compiler/GHC/Core/TyCo/Compare.hs - compiler/GHC/Core/TyCo/Subst.hs - compiler/GHC/Core/Type.hs - compiler/GHC/Core/Unify.hs - compiler/GHC/Core/Utils.hs - compiler/GHC/CoreToIface.hs - compiler/GHC/Driver/Backpack.hs - compiler/GHC/Driver/Config/Core/Lint.hs - compiler/GHC/Driver/Config/Core/Opt/Simplify.hs - compiler/GHC/Driver/Config/Finder.hs - compiler/GHC/Driver/Downsweep.hs - compiler/GHC/Driver/DynFlags.hs - compiler/GHC/Driver/Env.hs - compiler/GHC/Driver/Env/Types.hs - compiler/GHC/Driver/Main.hs - compiler/GHC/Driver/Make.hs - compiler/GHC/Driver/Pipeline.hs - compiler/GHC/Driver/Session.hs - compiler/GHC/Driver/Session/Units.hs - compiler/GHC/Hs/Binds.hs - compiler/GHC/Hs/ImpExp.hs - compiler/GHC/HsToCore/Docs.hs - compiler/GHC/HsToCore/Quote.hs - compiler/GHC/HsToCore/Usage.hs - compiler/GHC/Iface/Ext/Ast.hs - compiler/GHC/Iface/Ext/Binary.hs - compiler/GHC/Iface/Ext/Types.hs - compiler/GHC/Iface/Load.hs - compiler/GHC/Iface/Make.hs - compiler/GHC/Iface/Recomp.hs - compiler/GHC/Iface/Recomp/Types.hs - compiler/GHC/Iface/Tidy/StaticPtrTable.hs - compiler/GHC/Linker/Loader.hs - compiler/GHC/Parser.y - compiler/GHC/Parser/Header.hs - compiler/GHC/Plugins.hs - compiler/GHC/Prelude/Basic.hs - compiler/GHC/Rename/HsType.hs - compiler/GHC/Rename/Names.hs - compiler/GHC/Runtime/Debugger/Breakpoints.hs - compiler/GHC/Runtime/Eval.hs - compiler/GHC/Runtime/Heap/Inspect.hs - compiler/GHC/StgToByteCode.hs - compiler/GHC/StgToCmm/Prim.hs - compiler/GHC/StgToJS/Prim.hs - compiler/GHC/StgToJS/StaticPtr.hs - compiler/GHC/Tc/Deriv/Generics.hs - compiler/GHC/Tc/Gen/App.hs - compiler/GHC/Tc/Gen/Bind.hs - compiler/GHC/Tc/Gen/Expr.hs - compiler/GHC/Tc/Gen/Expr.hs-boot - compiler/GHC/Tc/Gen/Head.hs - compiler/GHC/Tc/Gen/HsType.hs - compiler/GHC/Tc/Gen/Match.hs - compiler/GHC/Tc/Gen/Pat.hs - compiler/GHC/Tc/Gen/Splice.hs - compiler/GHC/Tc/Module.hs - compiler/GHC/Tc/Solver/Dict.hs - compiler/GHC/Tc/Solver/Monad.hs - compiler/GHC/Tc/Solver/Solve.hs - compiler/GHC/Tc/TyCl/Instance.hs - compiler/GHC/Tc/Types.hs - compiler/GHC/Tc/Types/Evidence.hs - compiler/GHC/Tc/Types/Origin.hs - compiler/GHC/Tc/Utils/Monad.hs - compiler/GHC/Tc/Utils/TcMType.hs - compiler/GHC/Tc/Utils/TcType.hs - compiler/GHC/Tc/Utils/Unify.hs - compiler/GHC/ThToHs.hs - compiler/GHC/Types/Basic.hs - compiler/GHC/Types/Id/Make.hs - compiler/GHC/Types/Name/Cache.hs - compiler/GHC/Types/Name/Reader.hs - compiler/GHC/Types/SptEntry.hs - compiler/GHC/Unit/Finder.hs - compiler/GHC/Unit/Finder/Types.hs - compiler/GHC/Unit/Module/Deps.hs - compiler/GHC/Utils/Binary.hs - compiler/ghc.cabal.in - configure.ac - docs/users_guide/9.16.1-notes.rst - docs/users_guide/separate_compilation.rst - ghc/GHCi/UI.hs - ghc/Main.hs - hadrian/bootstrap/generate_bootstrap_plans - hadrian/bootstrap/hadrian-bootstrap-gen.cabal - hadrian/bootstrap/plan-9_10_1.json - hadrian/bootstrap/plan-9_6_5.json → hadrian/bootstrap/plan-9_10_2.json - hadrian/bootstrap/plan-9_6_6.json → hadrian/bootstrap/plan-9_12_1.json - hadrian/bootstrap/plan-9_6_4.json → hadrian/bootstrap/plan-9_12_2.json - − hadrian/bootstrap/plan-9_6_1.json - − hadrian/bootstrap/plan-9_6_2.json - − hadrian/bootstrap/plan-9_6_3.json - − hadrian/bootstrap/plan-9_8_1.json - − hadrian/bootstrap/plan-9_8_2.json - hadrian/bootstrap/plan-bootstrap-9_10_1.json - hadrian/bootstrap/plan-bootstrap-9_6_5.json → hadrian/bootstrap/plan-bootstrap-9_10_2.json - hadrian/bootstrap/plan-bootstrap-9_6_6.json → hadrian/bootstrap/plan-bootstrap-9_12_1.json - hadrian/bootstrap/plan-bootstrap-9_8_1.json → hadrian/bootstrap/plan-bootstrap-9_12_2.json - − hadrian/bootstrap/plan-bootstrap-9_6_1.json - − hadrian/bootstrap/plan-bootstrap-9_6_2.json - − hadrian/bootstrap/plan-bootstrap-9_6_3.json - − hadrian/bootstrap/plan-bootstrap-9_6_4.json - − hadrian/bootstrap/plan-bootstrap-9_8_2.json - hadrian/bootstrap/src/Main.hs - hadrian/hadrian.cabal - hadrian/src/Rules/ToolArgs.hs - hadrian/src/Settings/Default.hs - hadrian/src/Settings/Packages.hs - hadrian/src/Settings/Warnings.hs - libffi-tarballs - libraries/base/changelog.md - libraries/base/src/Data/Bifunctor.hs - libraries/base/src/GHC/Exts.hs - libraries/base/src/GHC/Stack/CloneStack.hs - libraries/ghc-boot-th/GHC/Boot/TH/Ppr.hs - libraries/ghc-experimental/ghc-experimental.cabal.in - + libraries/ghc-experimental/src/GHC/Stack/Annotation/Experimental.hs - libraries/ghc-heap/GHC/Exts/Heap/ClosureTypes.hs - libraries/ghc-heap/GHC/Exts/Heap/Closures.hs - + libraries/ghc-heap/GHC/Exts/Heap/Constants.hs - + libraries/ghc-heap/GHC/Exts/Heap/InfoTable.hs - + libraries/ghc-heap/GHC/Exts/Heap/InfoTable/Types.hs - + libraries/ghc-heap/GHC/Exts/Heap/InfoTableProf.hs - libraries/ghc-heap/GHC/Exts/Heap/ProfInfo/Types.hs - libraries/ghc-heap/GHC/Exts/Stack.hs - + libraries/ghc-heap/GHC/Exts/Stack/Constants.hs - libraries/ghc-heap/GHC/Exts/Stack/Decode.hs - libraries/ghc-heap/ghc-heap.cabal.in - libraries/ghc-heap/cbits/HeapPrim.cmm → libraries/ghc-internal/cbits/HeapPrim.cmm - libraries/ghc-heap/cbits/Stack.cmm → libraries/ghc-internal/cbits/Stack.cmm - libraries/ghc-internal/cbits/StackCloningDecoding.cmm - libraries/ghc-heap/cbits/Stack_c.c → libraries/ghc-internal/cbits/Stack_c.c - libraries/ghc-internal/ghc-internal.cabal.in - libraries/ghc-internal/jsbits/base.js - libraries/ghc-internal/src/GHC/Internal/ClosureTypes.hs - libraries/ghc-internal/src/GHC/Internal/Exception/Backtrace.hs - libraries/ghc-internal/src/GHC/Internal/Float.hs - + libraries/ghc-internal/src/GHC/Internal/Heap/Closures.hs - libraries/ghc-heap/GHC/Exts/Heap/Constants.hsc → libraries/ghc-internal/src/GHC/Internal/Heap/Constants.hsc - libraries/ghc-heap/GHC/Exts/Heap/InfoTable.hsc → libraries/ghc-internal/src/GHC/Internal/Heap/InfoTable.hsc - libraries/ghc-heap/GHC/Exts/Heap/InfoTable/Types.hsc → libraries/ghc-internal/src/GHC/Internal/Heap/InfoTable/Types.hsc - libraries/ghc-heap/GHC/Exts/Heap/InfoTableProf.hsc → libraries/ghc-internal/src/GHC/Internal/Heap/InfoTableProf.hsc - + libraries/ghc-internal/src/GHC/Internal/Heap/ProfInfo/Types.hs - libraries/ghc-internal/src/GHC/Internal/List.hs - + libraries/ghc-internal/src/GHC/Internal/Stack/Annotation.hs - libraries/ghc-internal/src/GHC/Internal/Stack/CloneStack.hs - libraries/ghc-heap/GHC/Exts/Stack/Constants.hsc → libraries/ghc-internal/src/GHC/Internal/Stack/Constants.hsc - + libraries/ghc-internal/src/GHC/Internal/Stack/Decode.hs - libraries/ghc-internal/src/GHC/Internal/System/IO.hs - libraries/ghc-internal/src/GHC/Internal/System/Posix/Internals.hs - libraries/ghc-internal/src/GHC/Internal/TH/Syntax.hs - + libraries/ghc-internal/tests/stack-annotation/Makefile - + libraries/ghc-internal/tests/stack-annotation/TestUtils.hs - + libraries/ghc-internal/tests/stack-annotation/all.T - + libraries/ghc-internal/tests/stack-annotation/ann_frame001.hs - + libraries/ghc-internal/tests/stack-annotation/ann_frame001.stdout - + libraries/ghc-internal/tests/stack-annotation/ann_frame002.hs - + libraries/ghc-internal/tests/stack-annotation/ann_frame002.stdout - + libraries/ghc-internal/tests/stack-annotation/ann_frame003.hs - + libraries/ghc-internal/tests/stack-annotation/ann_frame003.stdout - + libraries/ghc-internal/tests/stack-annotation/ann_frame004.hs - + libraries/ghc-internal/tests/stack-annotation/ann_frame004.stdout - libraries/ghci/GHCi/CreateBCO.hs - libraries/ghci/GHCi/Message.hs - libraries/ghci/GHCi/Run.hs - libraries/ghci/GHCi/TH.hs - libraries/ghci/ghci.cabal.in - libraries/template-haskell/Language/Haskell/TH/Lib.hs - libraries/template-haskell/Language/Haskell/TH/Syntax.hs - libraries/template-haskell/changelog.md - libraries/template-haskell/vendored-filepath/System/FilePath/Posix.hs - libraries/template-haskell/vendored-filepath/System/FilePath/Windows.hs - m4/find_python.m4 - rts/CloneStack.c - rts/CloneStack.h - rts/ClosureFlags.c - rts/Disassembler.c - rts/Hash.c - rts/Interpreter.c - rts/LdvProfile.c - rts/PrimOps.cmm - rts/Printer.c - rts/Profiling.c - rts/RaiseAsync.c - rts/RetainerProfile.c - rts/RtsMessages.c - rts/RtsSymbols.c - rts/RtsUtils.c - rts/STM.c - rts/Trace.c - rts/TraverseHeap.c - rts/include/rts/Bytecodes.h - rts/include/rts/storage/ClosureTypes.h - rts/include/rts/storage/Closures.h - rts/include/stg/MiscClosures.h - rts/js/profiling.js - rts/sm/Compact.c - rts/sm/Evac.c - rts/sm/NonMovingMark.c - rts/sm/Sanity.c - rts/sm/Scav.c - testsuite/.gitignore - testsuite/tests/count-deps/CountDepsAst.stdout - testsuite/tests/count-deps/CountDepsParser.stdout - testsuite/tests/driver/j-space/jspace.hs - + testsuite/tests/driver/make-prim/GHC/Internal/Prim.hs - + testsuite/tests/driver/make-prim/Makefile - + testsuite/tests/driver/make-prim/Test.hs - + testsuite/tests/driver/make-prim/Test2.hs - + testsuite/tests/driver/make-prim/all.T - testsuite/tests/gadt/T12468.stderr - testsuite/tests/ghc-e/should_fail/T24172.stderr - testsuite/tests/ghci.debugger/scripts/T26042b.script - testsuite/tests/ghci.debugger/scripts/T26042b.stdout - testsuite/tests/ghci.debugger/scripts/T26042c.script - testsuite/tests/ghci.debugger/scripts/T26042c.stdout - + testsuite/tests/ghci.debugger/scripts/T26042d2.hs - + testsuite/tests/ghci.debugger/scripts/T26042d2.script - + testsuite/tests/ghci.debugger/scripts/T26042d2.stdout - testsuite/tests/ghci.debugger/scripts/T26042e.stdout - testsuite/tests/ghci.debugger/scripts/T26042f.script - testsuite/tests/ghci.debugger/scripts/T26042f1.stdout - testsuite/tests/ghci.debugger/scripts/T26042f2.stdout - testsuite/tests/ghci.debugger/scripts/T26042g.stdout - testsuite/tests/ghci.debugger/scripts/all.T - testsuite/tests/ghci/scripts/T8353.stderr - testsuite/tests/ghci/scripts/ghci038.stdout - testsuite/tests/interface-stability/base-exports.stdout - testsuite/tests/interface-stability/base-exports.stdout-javascript-unknown-ghcjs - testsuite/tests/interface-stability/base-exports.stdout-mingw32 - testsuite/tests/interface-stability/base-exports.stdout-ws-32 - testsuite/tests/interface-stability/ghc-experimental-exports.stdout - testsuite/tests/interface-stability/ghc-experimental-exports.stdout-mingw32 - testsuite/tests/interface-stability/ghc-prim-exports.stdout - testsuite/tests/interface-stability/ghc-prim-exports.stdout-mingw32 - testsuite/tests/interface-stability/template-haskell-exports.stdout - − testsuite/tests/lib/stm/T26028.hs - − testsuite/tests/lib/stm/T26028.stdout - − testsuite/tests/lib/stm/all.T - − testsuite/tests/module/T21752.stderr - testsuite/tests/module/mod150.stderr - testsuite/tests/module/mod151.stderr - testsuite/tests/module/mod152.stderr - testsuite/tests/module/mod153.stderr - testsuite/tests/overloadedrecflds/should_fail/T18999_NoDisambiguateRecordFields.stderr - testsuite/tests/parser/should_compile/DumpRenamedAst.stderr - testsuite/tests/parser/should_compile/T14189.stderr - testsuite/tests/parser/should_compile/T19082.stderr - + testsuite/tests/patsyn/should_compile/T26331.hs - + testsuite/tests/patsyn/should_compile/T26331a.hs - testsuite/tests/patsyn/should_compile/all.T - testsuite/tests/perf/compiler/T4007.stdout - testsuite/tests/perf/compiler/hard_hole_fits.stderr - testsuite/tests/plugins/Makefile - + testsuite/tests/plugins/T21730-plugin/Makefile - + testsuite/tests/plugins/T21730-plugin/Setup.hs - + testsuite/tests/plugins/T21730-plugin/T21730-plugin.cabal - + testsuite/tests/plugins/T21730-plugin/T21730_Plugin.hs - + testsuite/tests/plugins/T21730.hs - testsuite/tests/plugins/all.T - testsuite/tests/quotes/LiftErrMsg.stderr - testsuite/tests/quotes/LiftErrMsgDefer.stderr - testsuite/tests/quotes/LiftErrMsgTyped.stderr - testsuite/tests/rename/should_compile/T22513d.stderr - testsuite/tests/rename/should_compile/T22513e.stderr - testsuite/tests/rename/should_compile/T22513f.stderr - testsuite/tests/rename/should_compile/T22513g.stderr - testsuite/tests/rename/should_compile/T22513h.stderr - testsuite/tests/rename/should_compile/T22513i.stderr - testsuite/tests/rename/should_compile/rn039.ghc.stderr - testsuite/tests/rename/should_fail/T15487.stderr - testsuite/tests/rename/should_fail/T18740a.stderr - testsuite/tests/rename/should_fail/rnfail044.stderr - testsuite/tests/rts/KeepCafsBase.hs - testsuite/tests/rts/all.T - testsuite/tests/rts/flags/all.T - testsuite/tests/safeHaskell/flags/SafeFlags17.stderr - testsuite/tests/simplCore/should_compile/T15056.stderr - testsuite/tests/simplCore/should_compile/T15445.stderr - + testsuite/tests/simplCore/should_compile/T24606.hs - + testsuite/tests/simplCore/should_compile/T26323b.hs - testsuite/tests/simplCore/should_compile/all.T - + testsuite/tests/simplCore/should_run/T26323.hs - + testsuite/tests/simplCore/should_run/T26323.stdout - testsuite/tests/simplCore/should_run/all.T - testsuite/tests/th/Makefile - testsuite/tests/th/T10267.stderr - testsuite/tests/th/T14627.stderr - testsuite/tests/th/T15321.stderr - + testsuite/tests/th/TH_Depends_Dir.hs - + testsuite/tests/th/TH_Depends_Dir.stdout - + testsuite/tests/th/TH_Depends_Dir_External.hs - testsuite/tests/th/all.T - testsuite/tests/typecheck/should_compile/T13050.stderr - testsuite/tests/typecheck/should_compile/T14273.stderr - testsuite/tests/typecheck/should_compile/T14590.stderr - testsuite/tests/typecheck/should_compile/T25180.stderr - + testsuite/tests/typecheck/should_compile/T25992a.hs - + testsuite/tests/typecheck/should_compile/T26345.hs - + testsuite/tests/typecheck/should_compile/T26346.hs - + testsuite/tests/typecheck/should_compile/T26350.hs - + testsuite/tests/typecheck/should_compile/T26358.hs - testsuite/tests/typecheck/should_compile/T9497a.stderr - testsuite/tests/typecheck/should_compile/all.T - testsuite/tests/typecheck/should_compile/refinement_hole_fits.stderr - testsuite/tests/typecheck/should_compile/subsumption_sort_hole_fits.stderr - testsuite/tests/typecheck/should_fail/T14884.stderr - testsuite/tests/typecheck/should_fail/T21130.stderr - testsuite/tests/typecheck/should_fail/T23739b.stderr - testsuite/tests/typecheck/should_fail/T23739c.stderr - + testsuite/tests/typecheck/should_fail/T26318.hs - + testsuite/tests/typecheck/should_fail/T26318.stderr - testsuite/tests/typecheck/should_fail/T9497d.stderr - testsuite/tests/typecheck/should_fail/all.T - testsuite/tests/typecheck/should_fail/tcfail037.stderr - testsuite/tests/typecheck/should_run/T9497a-run.stderr - testsuite/tests/typecheck/should_run/T9497b-run.stderr - testsuite/tests/typecheck/should_run/T9497c-run.stderr - testsuite/tests/vdq-rta/should_fail/T23738_fail_pun.stderr - utils/check-exact/ExactPrint.hs - utils/check-exact/Main.hs - utils/check-exact/Transform.hs - utils/check-exact/Utils.hs - utils/deriveConstants/Main.hs - utils/ghc-pkg/Main.hs - utils/ghc-toolchain/src/GHC/Toolchain/CheckArm.hs - utils/haddock/haddock-api/src/Haddock/Backends/Xhtml.hs - utils/haddock/haddock-api/src/Haddock/InterfaceFile.hs - utils/haddock/haddock-library/src/Documentation/Haddock/Parser.hs - utils/jsffi/dyld.mjs The diff was not included because it is too large. View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/86560233759a674264a1e77ec4c260f... -- View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/86560233759a674264a1e77ec4c260f... You're receiving this email because of your account on gitlab.haskell.org.