Thanks for everybody's help. I got the latest versions of cabal, installed
the "early" version of RC2 and then cabal install vector worked
On Thu, Feb 27, 2014 at 10:37 PM, George Colpitts wrote: I am sad. How do I uninstall the current version I have and install that
version? Thanks On Thu, Feb 27, 2014 at 10:27 PM, Carter Schonwald <
carter.schonwald@gmail.com> wrote: you need cabal-install 1.18 or you'll be sad. On Thu, Feb 27, 2014 at 9:16 PM, George Colpitts <
george.colpitts@gmail.com> wrote: I'm using Cabal-1.18.1.3 and cabal-install version 1.16.0.2 On Thu, Feb 27, 2014 at 9:04 PM, Austin Seipp Thanks. Another question is what version of Cabal you are using, as it
knows how to build dylibs properly. I'm using cabal 1.18. To delete the RC, you can just delete the directory it installed into
(the GHC-7.8.xxxxx folder). Also make sure you remove the executables from
$PATH And no worries about any unnecessary work. I'm here to do the release
after all, and feedback is helpful! On Thursday, February 27, 2014, George Colpitts <
george.colpitts@gmail.com> wrote: Probably my error, I just wanted to make sure there wasn't a problem
that was missed. Thanks for checking. Sorry for any confusion I caused. Here are the details of what I did: I took ghc-7.8.0.20140226-x86_64-apple-darwin-mavericks.tar.bz2 from
http://www.haskell.org/ghc/dist/7.8.1-rc2/ and followed the
instructions in the INSTALL file to install it, i.e. One possible difference is that my gcc is gcc-4.8 from gnu not gcc
from Apple. Also my uname output is different than yours: uname -a
Darwin iMac27-5.local 13.1.0 Darwin Kernel Version 13.1.0: Thu Jan 16
19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64 x86_64 Finally I am running XCode 5.2 Is there a to uninstall or clean these RCs? I'll wait for official notice before trying anything else I really appreciate all your work and I'm sorry if I caused you any
unnecessary work. I had no problems installing RC1 so may have been
overconfident On Thu, Feb 27, 2014 at 8:05 PM, Austin Seipp I just tested this and cannot reproduce it: $ cabal install vector
... building ... $ ls /Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/vector-0.10.9.1
Data libHSvector-0.10.9.1-ghc7.8.0.20140226.dylib include
libHSvector-0.10.9.1.a $ ls
/Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/primitive-0.5.2.1/
Control include libHSprimitive-0.5.2.1.a Data
libHSprimitive-0.5.2.1-ghc7.8.0.20140226.dylib $ uname -a
Darwin Calcifer.local 13.0.0 Darwin Kernel Version 13.0.0: Thu Sep 19
22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64 x86_64 There is certainly a dylib available for both of these libraries.
You're going to need to be very explicit in what you did to install
GHC, and how. (Did you use the binary distribution I pulled from the
server?)* Unfortunately I'm about to run out the door, and don't have
time for the next few hours closely investigate. * On another note, I will say that there is not an 'RC2' until I
announce that it is so, to be completely honest. Right this second,
some last minute fixes went into HEAD which will be merged for the
actual RC2. Otherwise I would have released it today. But thank you
for testing anyway! corrected subject line On Thu, Feb 27, 2014 at 7:47 PM, George Colpitts <
george.colpitts@gmail.com>
wrote:
>
> Hi
>
> After installing the first version of RC2 I ran into the following >
> cabal install vector
> Resolving dependencies...
> Configuring vector-0.10.9.1...
> ...
> [ 5 of 19] Compiling Data.Vector.Fusion.Stream.Monadic (
> Data/Vector/Fusion/Stream/Monadic.hs,
> dist/build/Data/Vector/Fusion/Stream/Monadic.o )
> Loading package ghc-prim ... linking ... done.
> Loading package integer-gmp ... linking ... done.
> Loading package base ... linking ... done.
> Loading package primitive-0.5.2.1 ... <command line>: can't load
.so/.DLL
> for: libHSprimitive-0.5.2.1.dylib
(dlopen(libHSprimitive-0.5.2.1.dylib, 9):
> image not found)
>
> There seems to be a general problem that the install did not > dynamic libraries at least on the Mac:
>
> ls /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/*/lib
>
/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/cpphs-1.18.2/lib:
> HScpphs-1.18.2.o Language Text libHScpphs-1.18.2.a >
>
>
/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hashable-1.2.1.0/lib:
> Data HShashable-1.2.1.0.o libHShashable-1.2.1.0.a
> libHShashable-1.2.1.0_p.a
>
>
>
/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hscolour-1.20.3/lib:
> HShscolour-1.20.3.o Language libHShscolour-1.20.3.a
> libHShscolour-1.20.3_p.a
>
>
>
/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/primitive-0.5.2.1/lib:
> Control HSprimitive-0.5.2.1.o libHSprimitive-0.5.2.1.a
> Data include libHSprimitive-0.5.2.1_p.a
>
>
/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/syb-0.4.1/lib:
> Data Generics HSsyb-0.4.1.o libHSsyb-0.4.1.a libHSsyb-0.4.1_p.a
>
>
/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/text-1.1.0.0/lib:
> Data HStext-1.1.0.0.o libHStext-1.1.0.0.a libHStext-1.1.0.0_p.a
>
>
>
/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/unordered-containers-0.2.3.3/lib:
> Data libHSunordered-containers-0.2.3.3.a
> HSunordered-containers-0.2.3.3.o On Thu, Feb 27, 2014 at 5:53 PM, George Colpitts
_______________________________________________
ghc-devs mailing list
ghc-devs@haskell.org --
Regards, Austin Seipp, Haskell Consultant
Well-Typed LLP, http://www.well-typed.com/ _______________________________________________
ghc-devs mailing list
ghc-devs@haskell.org
http://www.haskell.org/mailman/listinfo/ghc-devs