Re: first version of RC2 has problems with lack of dynamic libraries at least on the Mac

newer
Cabal-1.18.1.3 and...

older
Clean build ASSERT failure

George Colpitts

27 Feb 2014 27 Feb '14

6:53 p.m.

corrected subject line On Thu, Feb 27, 2014 at 7:47 PM, George Colpitts wrote:

...

Hi

After installing the first version of RC2 I ran into the following problem

cabal install vector Resolving dependencies... Configuring vector-0.10.9.1... ... [ 5 of 19] Compiling Data.Vector.Fusion.Stream.Monadic ( Data/Vector/Fusion/Stream/Monadic.hs, dist/build/Data/Vector/Fusion/Stream/Monadic.o ) Loading package ghc-prim ... linking ... done. Loading package integer-gmp ... linking ... done. Loading package base ... linking ... done. Loading package primitive-0.5.2.1 ... <command line>: can't load .so/.DLL for: libHSprimitive-0.5.2.1.dylib (dlopen(libHSprimitive-0.5.2.1.dylib, 9): image not found)

There seems to be a general problem that the install did not produce any dynamic libraries at least on the Mac:

ls /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/*/lib /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/cpphs-1.18.2/lib: HScpphs-1.18.2.o Language Text libHScpphs-1.18.2.a libHScpphs-1.18.2_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hashable-1.2.1.0/lib: Data HShashable-1.2.1.0.o libHShashable-1.2.1.0.a libHShashable-1.2.1.0_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hscolour-1.20.3/lib: HShscolour-1.20.3.o Language libHShscolour-1.20.3.a libHShscolour-1.20.3_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/primitive-0.5.2.1/lib: Control HSprimitive-0.5.2.1.o libHSprimitive-0.5.2.1.a Data include libHSprimitive-0.5.2.1_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/syb-0.4.1/lib: Data Generics HSsyb-0.4.1.o libHSsyb-0.4.1.a libHSsyb-0.4.1_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/text-1.1.0.0/lib: Data HStext-1.1.0.0.o libHStext-1.1.0.0.a libHStext-1.1.0.0_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/unordered-containers-0.2.3.3/lib: Data libHSunordered-containers-0.2.3.3.a HSunordered-containers-0.2.3.3.o libHSunordered-containers-0.2.3.3_p.a

Attachments:

attachment.html (text/html — 4.4 KB)

Show replies by date

Austin Seipp

27 Feb 27 Feb

7:05 p.m.

New subject: first version of RC2 has problems with lack of dynamic libraries at least on the Mac

I just tested this and cannot reproduce it: $ cabal install vector ... building ... $ ls /Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/vector-0.10.9.1 Data libHSvector-0.10.9.1-ghc7.8.0.20140226.dylib include libHSvector-0.10.9.1.a $ ls /Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/primitive-0.5.2.1/ Control include libHSprimitive-0.5.2.1.a Data libHSprimitive-0.5.2.1-ghc7.8.0.20140226.dylib $ uname -a Darwin Calcifer.local 13.0.0 Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64 x86_64 There is certainly a dylib available for both of these libraries. You're going to need to be very explicit in what you did to install GHC, and how. (Did you use the binary distribution I pulled from the server?)* Unfortunately I'm about to run out the door, and don't have time for the next few hours closely investigate. * On another note, I will say that there is not an 'RC2' until I announce that it is so, to be completely honest. Right this second, some last minute fixes went into HEAD which will be merged for the actual RC2. Otherwise I would have released it today. But thank you for testing anyway! On Thu, Feb 27, 2014 at 5:53 PM, George Colpitts wrote:

...

corrected subject line

On Thu, Feb 27, 2014 at 7:47 PM, George Colpitts wrote:

...
Hi

After installing the first version of RC2 I ran into the following problem

cabal install vector Resolving dependencies... Configuring vector-0.10.9.1... ... [ 5 of 19] Compiling Data.Vector.Fusion.Stream.Monadic ( Data/Vector/Fusion/Stream/Monadic.hs, dist/build/Data/Vector/Fusion/Stream/Monadic.o ) Loading package ghc-prim ... linking ... done. Loading package integer-gmp ... linking ... done. Loading package base ... linking ... done. Loading package primitive-0.5.2.1 ... <command line>: can't load .so/.DLL for: libHSprimitive-0.5.2.1.dylib (dlopen(libHSprimitive-0.5.2.1.dylib, 9): image not found)

There seems to be a general problem that the install did not produce any dynamic libraries at least on the Mac:

ls /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/*/lib /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/cpphs-1.18.2/lib: HScpphs-1.18.2.o Language Text libHScpphs-1.18.2.a libHScpphs-1.18.2_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hashable-1.2.1.0/lib: Data HShashable-1.2.1.0.o libHShashable-1.2.1.0.a libHShashable-1.2.1.0_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hscolour-1.20.3/lib: HShscolour-1.20.3.o Language libHShscolour-1.20.3.a libHShscolour-1.20.3_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/primitive-0.5.2.1/lib: Control HSprimitive-0.5.2.1.o libHSprimitive-0.5.2.1.a Data include libHSprimitive-0.5.2.1_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/syb-0.4.1/lib: Data Generics HSsyb-0.4.1.o libHSsyb-0.4.1.a libHSsyb-0.4.1_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/text-1.1.0.0/lib: Data HStext-1.1.0.0.o libHStext-1.1.0.0.a libHStext-1.1.0.0_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/unordered-containers-0.2.3.3/lib: Data libHSunordered-containers-0.2.3.3.a HSunordered-containers-0.2.3.3.o libHSunordered-containers-0.2.3.3_p.a

_______________________________________________ ghc-devs mailing list ghc-devs@haskell.org http://www.haskell.org/mailman/listinfo/ghc-devs

-- Regards, Austin Seipp, Haskell Consultant Well-Typed LLP, http://www.well-typed.com/

George Colpitts

7:58 p.m.

New subject: first version of RC2 has problems with lack of dynamic libraries at least on the Mac

Probably my error, I just wanted to make sure there wasn't a problem that was missed. Thanks for checking. Sorry for any confusion I caused. Here are the details of what I did: I took ghc-7.8.0.20140226-x86_64-apple-darwin-mavericks.tar.bz2 from http://www.haskell.org/ghc/dist/7.8.1-rc2/ and followed the instructions in the INSTALL file to install it, i.e. One possible difference is that my gcc is gcc-4.8 from gnu not gcc from Apple. Also my uname output is different than yours: uname -a Darwin iMac27-5.local 13.1.0 Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64 x86_64 Finally I am running XCode 5.2 Is there a to uninstall or clean these RCs? I'll wait for official notice before trying anything else I really appreciate all your work and I'm sorry if I caused you any unnecessary work. I had no problems installing RC1 so may have been overconfident On Thu, Feb 27, 2014 at 8:05 PM, Austin Seipp wrote:

...

I just tested this and cannot reproduce it:

$ cabal install vector ... building ...

$ ls /Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/vector-0.10.9.1 Data libHSvector-0.10.9.1-ghc7.8.0.20140226.dylib include libHSvector-0.10.9.1.a

$ ls /Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/primitive-0.5.2.1/ Control include libHSprimitive-0.5.2.1.a Data libHSprimitive-0.5.2.1-ghc7.8.0.20140226.dylib

$ uname -a Darwin Calcifer.local 13.0.0 Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64 x86_64

There is certainly a dylib available for both of these libraries. You're going to need to be very explicit in what you did to install GHC, and how. (Did you use the binary distribution I pulled from the server?)* Unfortunately I'm about to run out the door, and don't have time for the next few hours closely investigate.

* On another note, I will say that there is not an 'RC2' until I announce that it is so, to be completely honest. Right this second, some last minute fixes went into HEAD which will be merged for the actual RC2. Otherwise I would have released it today. But thank you for testing anyway!

...
corrected subject line

On Thu, Feb 27, 2014 at 7:47 PM, George Colpitts < george.colpitts@gmail.com> wrote:

...
Hi

After installing the first version of RC2 I ran into the following

On Thu, Feb 27, 2014 at 5:53 PM, George Colpitts wrote: problem

...
...
cabal install vector Resolving dependencies... Configuring vector-0.10.9.1... ... [ 5 of 19] Compiling Data.Vector.Fusion.Stream.Monadic ( Data/Vector/Fusion/Stream/Monadic.hs, dist/build/Data/Vector/Fusion/Stream/Monadic.o ) Loading package ghc-prim ... linking ... done. Loading package integer-gmp ... linking ... done. Loading package base ... linking ... done. Loading package primitive-0.5.2.1 ... <command line>: can't load

.so/.DLL

...
for: libHSprimitive-0.5.2.1.dylib (dlopen(libHSprimitive-0.5.2.1.dylib, 9): image not found)

There seems to be a general problem that the install did not produce any dynamic libraries at least on the Mac:

ls /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/*/lib

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/cpphs-1.18.2/lib:

...
HScpphs-1.18.2.o Language Text libHScpphs-1.18.2.a libHScpphs-1.18.2_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hashable-1.2.1.0/lib:

...
Data HShashable-1.2.1.0.o libHShashable-1.2.1.0.a libHShashable-1.2.1.0_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hscolour-1.20.3/lib:

...
HShscolour-1.20.3.o Language libHShscolour-1.20.3.a libHShscolour-1.20.3_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/primitive-0.5.2.1/lib:

...
Control HSprimitive-0.5.2.1.o libHSprimitive-0.5.2.1.a Data include libHSprimitive-0.5.2.1_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/syb-0.4.1/lib: Data Generics HSsyb-0.4.1.o libHSsyb-0.4.1.a libHSsyb-0.4.1_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/text-1.1.0.0/lib:

...
Data HStext-1.1.0.0.o libHStext-1.1.0.0.a libHStext-1.1.0.0_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/unordered-containers-0.2.3.3/lib:

...
Data libHSunordered-containers-0.2.3.3.a HSunordered-containers-0.2.3.3.o libHSunordered-containers-0.2.3.3_p.a

_______________________________________________ ghc-devs mailing list ghc-devs@haskell.org http://www.haskell.org/mailman/listinfo/ghc-devs

-- Regards,

Austin Seipp, Haskell Consultant Well-Typed LLP, http://www.well-typed.com/

Austin Seipp

8:04 p.m.

New subject: first version of RC2 has problems with lack of dynamic libraries at least on the Mac

Thanks. Another question is what version of Cabal you are using, as it knows how to build dylibs properly. I'm using cabal 1.18. To delete the RC, you can just delete the directory it installed into (the GHC-7.8.xxxxx folder). Also make sure you remove the executables from $PATH And no worries about any unnecessary work. I'm here to do the release after all, and feedback is helpful! On Thursday, February 27, 2014, George Colpitts wrote:

...

Probably my error, I just wanted to make sure there wasn't a problem that was missed. Thanks for checking. Sorry for any confusion I caused.

Here are the details of what I did:

I took ghc-7.8.0.20140226-x86_64-apple-darwin-mavericks.tar.bz2 from http://www.haskell.org/ghc/dist/7.8.1-rc2/ and followed the instructions in the INSTALL file to install it, i.e.

One possible difference is that my gcc is gcc-4.8 from gnu not gcc from Apple.

Also my uname output is different than yours:

uname -a Darwin iMac27-5.local 13.1.0 Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64 x86_64

Finally I am running XCode 5.2

Is there a to uninstall or clean these RCs?

I'll wait for official notice before trying anything else

I really appreciate all your work and I'm sorry if I caused you any unnecessary work. I had no problems installing RC1 so may have been overconfident

On Thu, Feb 27, 2014 at 8:05 PM, Austin Seipp wrote:

I just tested this and cannot reproduce it:

$ cabal install vector ... building ...

$ ls /Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/vector-0.10.9.1 Data libHSvector-0.10.9.1-ghc7.8.0.20140226.dylib include libHSvector-0.10.9.1.a

$ ls /Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/primitive-0.5.2.1/ Control include libHSprimitive-0.5.2.1.a Data libHSprimitive-0.5.2.1-ghc7.8.0.20140226.dylib

$ uname -a Darwin Calcifer.local 13.0.0 Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64 x86_64

There is certainly a dylib available for both of these libraries. You're going to need to be very explicit in what you did to install GHC, and how. (Did you use the binary distribution I pulled from the server?)* Unfortunately I'm about to run out the door, and don't have time for the next few hours closely investigate.

* On another note, I will say that there is not an 'RC2' until I announce that it is so, to be completely honest. Right this second, some last minute fixes went into HEAD which will be merged for the actual RC2. Otherwise I would have released it today. But thank you for testing anyway!

...
corrected subject line

On Thu, Feb 27, 2014 at 7:47 PM, George Colpitts < george.colpitts@gmail.com> wrote:

...
Hi

After installing the first version of RC2 I ran into the following

On Thu, Feb 27, 2014 at 5:53 PM, George Colpitts wrote: problem

...
...
cabal install vector Resolving dependencies... Configuring vector-0.10.9.1... ... [ 5 of 19] Compiling Data.Vector.Fusion.Stream.Monadic ( Data/Vector/Fusion/Stream/Monadic.hs, dist/build/Data/Vector/Fusion/Stream/Monadic.o ) Loading package ghc-prim ... linking ... done. Loading package integer-gmp ... linking ... done. Loading package base ... linking ... done. Loading package primitive-0.5.2.1 ... <command line>: can't load

.so/.DLL

...
for: libHSprimitive-0.5.2.1.dylib (dlopen(libHSprimitive-0.5.2.1.dylib, 9): image not found)

There seems to be a general problem that the install did not produce any dynamic libraries at least on the Mac:

ls /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/*/lib

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/cpphs-1.18.2/lib:

...
HScpphs-1.18.2.o Language Text libHScpphs-1.18.2.a libHScpphs-1.18.2_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hashable-1.2.1.0/lib:

...
Data HShashable-1.2.1.0.o libHShashable-1.2.1.0.a libHShashable-1.2.1.0_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hscolour-1.20.3/lib:

...
HShscolour-1.20.3.o Language libHShscolour-1.20.3.a libHShscolour-1.20.3_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/primitive-0.5.2.1/lib:

...
Control HSprimitive-0.5.2.1.o libHSprimitive-0.5.2.1.a Data include libHSprimitive-0.5.2.1_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/syb-0.4.1/lib: Data Generics HSsyb-0.4.1.o libHSsyb-0.4.1.a libHSsyb-0.4.1_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/text-1.1.0.0/lib:

...
Data HStext-1.1.0.0.o libHStext-1.1.0.0.a libHStext-1.1.0.0_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/unordered-containers-0.2.3.3/lib:

...
Data libHSunordered-containers-0.2.3.3.a HSunordered-containers-0.2.3.3.o libHSunordered-containers-0.2.3.3_p.a

_______________________________________________ ghc-devs mailing list ghc-devs@haskell.org

-- Regards, Austin Seipp, Haskell Consultant Well-Typed LLP, http://www.well-typed.com/

George Colpitts

9:16 p.m.

New subject: first version of RC2 has problems with lack of dynamic libraries at least on the Mac

I'm using Cabal-1.18.1.3 and cabal-install version 1.16.0.2 On Thu, Feb 27, 2014 at 9:04 PM, Austin Seipp wrote:

...

Thanks. Another question is what version of Cabal you are using, as it knows how to build dylibs properly. I'm using cabal 1.18.

To delete the RC, you can just delete the directory it installed into (the GHC-7.8.xxxxx folder). Also make sure you remove the executables from $PATH

And no worries about any unnecessary work. I'm here to do the release after all, and feedback is helpful!

On Thursday, February 27, 2014, George Colpitts wrote:

...
Probably my error, I just wanted to make sure there wasn't a problem that was missed. Thanks for checking. Sorry for any confusion I caused.

Here are the details of what I did:

I took ghc-7.8.0.20140226-x86_64-apple-darwin-mavericks.tar.bz2 from http://www.haskell.org/ghc/dist/7.8.1-rc2/ and followed the instructions in the INSTALL file to install it, i.e.

One possible difference is that my gcc is gcc-4.8 from gnu not gcc from Apple.

Also my uname output is different than yours:

uname -a Darwin iMac27-5.local 13.1.0 Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64 x86_64

Finally I am running XCode 5.2

Is there a to uninstall or clean these RCs?

I'll wait for official notice before trying anything else

I really appreciate all your work and I'm sorry if I caused you any unnecessary work. I had no problems installing RC1 so may have been overconfident

On Thu, Feb 27, 2014 at 8:05 PM, Austin Seipp wrote:

I just tested this and cannot reproduce it:

$ cabal install vector ... building ...

$ ls /Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/vector-0.10.9.1 Data libHSvector-0.10.9.1-ghc7.8.0.20140226.dylib include libHSvector-0.10.9.1.a

$ ls /Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/primitive-0.5.2.1/ Control include libHSprimitive-0.5.2.1.a Data libHSprimitive-0.5.2.1-ghc7.8.0.20140226.dylib

$ uname -a Darwin Calcifer.local 13.0.0 Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64 x86_64

There is certainly a dylib available for both of these libraries. You're going to need to be very explicit in what you did to install GHC, and how. (Did you use the binary distribution I pulled from the server?)* Unfortunately I'm about to run out the door, and don't have time for the next few hours closely investigate.

* On another note, I will say that there is not an 'RC2' until I announce that it is so, to be completely honest. Right this second, some last minute fixes went into HEAD which will be merged for the actual RC2. Otherwise I would have released it today. But thank you for testing anyway!

...
corrected subject line

On Thu, Feb 27, 2014 at 7:47 PM, George Colpitts < george.colpitts@gmail.com> wrote:

...
Hi

After installing the first version of RC2 I ran into the following

...
...
cabal install vector Resolving dependencies... Configuring vector-0.10.9.1... ... [ 5 of 19] Compiling Data.Vector.Fusion.Stream.Monadic ( Data/Vector/Fusion/Stream/Monadic.hs, dist/build/Data/Vector/Fusion/Stream/Monadic.o ) Loading package ghc-prim ... linking ... done. Loading package integer-gmp ... linking ... done. Loading package base ... linking ... done. Loading package primitive-0.5.2.1 ... <command line>: can't load

.so/.DLL

...
for: libHSprimitive-0.5.2.1.dylib (dlopen(libHSprimitive-0.5.2.1.dylib, 9): image not found)

There seems to be a general problem that the install did not produce any dynamic libraries at least on the Mac:

ls /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/*/lib

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/cpphs-1.18.2/lib:

...
HScpphs-1.18.2.o Language Text libHScpphs-1.18.2.a

On Thu, Feb 27, 2014 at 5:53 PM, George Colpitts wrote: problem libHScpphs-1.18.2_p.a

...
...
/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hashable-1.2.1.0/lib:

...
Data HShashable-1.2.1.0.o libHShashable-1.2.1.0.a libHShashable-1.2.1.0_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hscolour-1.20.3/lib:

...
HShscolour-1.20.3.o Language libHShscolour-1.20.3.a libHShscolour-1.20.3_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/primitive-0.5.2.1/lib:

...
Control HSprimitive-0.5.2.1.o libHSprimitive-0.5.2.1.a Data include libHSprimitive-0.5.2.1_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/syb-0.4.1/lib: Data Generics HSsyb-0.4.1.o libHSsyb-0.4.1.a libHSsyb-0.4.1_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/text-1.1.0.0/lib:

...
Data HStext-1.1.0.0.o libHStext-1.1.0.0.a libHStext-1.1.0.0_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/unordered-containers-0.2.3.3/lib:

...
Data libHSunordered-containers-0.2.3.3.a HSunordered-containers-0.2.3.3.o libHSunordered-containers-0.2.3.3_p.a

_______________________________________________ ghc-devs mailing list ghc-devs@haskell.org

-- Regards,

Austin Seipp, Haskell Consultant Well-Typed LLP, http://www.well-typed.com/

Carter Schonwald

9:27 p.m.

New subject: first version of RC2 has problems with lack of dynamic libraries at least on the Mac

you need cabal-install 1.18 or you'll be sad. On Thu, Feb 27, 2014 at 9:16 PM, George Colpitts wrote:

...

I'm using Cabal-1.18.1.3 and cabal-install version 1.16.0.2

On Thu, Feb 27, 2014 at 9:04 PM, Austin Seipp wrote:

...
Thanks. Another question is what version of Cabal you are using, as it knows how to build dylibs properly. I'm using cabal 1.18.

To delete the RC, you can just delete the directory it installed into (the GHC-7.8.xxxxx folder). Also make sure you remove the executables from $PATH

And no worries about any unnecessary work. I'm here to do the release after all, and feedback is helpful!

On Thursday, February 27, 2014, George Colpitts < george.colpitts@gmail.com> wrote:

...
Probably my error, I just wanted to make sure there wasn't a problem that was missed. Thanks for checking. Sorry for any confusion I caused.

Here are the details of what I did:

I took ghc-7.8.0.20140226-x86_64-apple-darwin-mavericks.tar.bz2 from http://www.haskell.org/ghc/dist/7.8.1-rc2/ and followed the instructions in the INSTALL file to install it, i.e.

One possible difference is that my gcc is gcc-4.8 from gnu not gcc from Apple.

Also my uname output is different than yours:

uname -a Darwin iMac27-5.local 13.1.0 Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64 x86_64

Finally I am running XCode 5.2

Is there a to uninstall or clean these RCs?

I'll wait for official notice before trying anything else

I really appreciate all your work and I'm sorry if I caused you any unnecessary work. I had no problems installing RC1 so may have been overconfident

On Thu, Feb 27, 2014 at 8:05 PM, Austin Seipp wrote:

I just tested this and cannot reproduce it:

$ cabal install vector ... building ...

$ ls /Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/vector-0.10.9.1 Data libHSvector-0.10.9.1-ghc7.8.0.20140226.dylib include libHSvector-0.10.9.1.a

$ ls /Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/primitive-0.5.2.1/ Control include libHSprimitive-0.5.2.1.a Data libHSprimitive-0.5.2.1-ghc7.8.0.20140226.dylib

$ uname -a Darwin Calcifer.local 13.0.0 Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64 x86_64

There is certainly a dylib available for both of these libraries. You're going to need to be very explicit in what you did to install GHC, and how. (Did you use the binary distribution I pulled from the server?)* Unfortunately I'm about to run out the door, and don't have time for the next few hours closely investigate.

* On another note, I will say that there is not an 'RC2' until I announce that it is so, to be completely honest. Right this second, some last minute fixes went into HEAD which will be merged for the actual RC2. Otherwise I would have released it today. But thank you for testing anyway!

...
corrected subject line

On Thu, Feb 27, 2014 at 7:47 PM, George Colpitts < george.colpitts@gmail.com> wrote:

...
Hi

After installing the first version of RC2 I ran into the following

...
...
cabal install vector Resolving dependencies... Configuring vector-0.10.9.1... ... [ 5 of 19] Compiling Data.Vector.Fusion.Stream.Monadic ( Data/Vector/Fusion/Stream/Monadic.hs, dist/build/Data/Vector/Fusion/Stream/Monadic.o ) Loading package ghc-prim ... linking ... done. Loading package integer-gmp ... linking ... done. Loading package base ... linking ... done. Loading package primitive-0.5.2.1 ... <command line>: can't load

.so/.DLL

...
for: libHSprimitive-0.5.2.1.dylib (dlopen(libHSprimitive-0.5.2.1.dylib, 9): image not found)

There seems to be a general problem that the install did not produce any dynamic libraries at least on the Mac:

ls /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/*/lib

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/cpphs-1.18.2/lib:

...
HScpphs-1.18.2.o Language Text libHScpphs-1.18.2.a

On Thu, Feb 27, 2014 at 5:53 PM, George Colpitts wrote: problem libHScpphs-1.18.2_p.a

...
...
/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hashable-1.2.1.0/lib:

...
Data HShashable-1.2.1.0.o libHShashable-1.2.1.0.a libHShashable-1.2.1.0_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hscolour-1.20.3/lib:

...
HShscolour-1.20.3.o Language libHShscolour-1.20.3.a libHShscolour-1.20.3_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/primitive-0.5.2.1/lib:

...
Control HSprimitive-0.5.2.1.o libHSprimitive-0.5.2.1.a Data include libHSprimitive-0.5.2.1_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/syb-0.4.1/lib: Data Generics HSsyb-0.4.1.o libHSsyb-0.4.1.a libHSsyb-0.4.1_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/text-1.1.0.0/lib:

...
Data HStext-1.1.0.0.o libHStext-1.1.0.0.a libHStext-1.1.0.0_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/unordered-containers-0.2.3.3/lib:

...
Data libHSunordered-containers-0.2.3.3.a HSunordered-containers-0.2.3.3.o libHSunordered-containers-0.2.3.3_p.a

_______________________________________________ ghc-devs mailing list ghc-devs@haskell.org

-- Regards,

Austin Seipp, Haskell Consultant Well-Typed LLP, http://www.well-typed.com/

_______________________________________________ ghc-devs mailing list ghc-devs@haskell.org http://www.haskell.org/mailman/listinfo/ghc-devs

George Colpitts

9:37 p.m.

New subject: first version of RC2 has problems with lack of dynamic libraries at least on the Mac

I am sad. How do I uninstall the current version I have and install that version? Thanks On Thu, Feb 27, 2014 at 10:27 PM, Carter Schonwald < carter.schonwald@gmail.com> wrote:

...

you need cabal-install 1.18 or you'll be sad.

On Thu, Feb 27, 2014 at 9:16 PM, George Colpitts < george.colpitts@gmail.com> wrote:

...
I'm using Cabal-1.18.1.3 and cabal-install version 1.16.0.2

On Thu, Feb 27, 2014 at 9:04 PM, Austin Seipp wrote:

...
Thanks. Another question is what version of Cabal you are using, as it knows how to build dylibs properly. I'm using cabal 1.18.

To delete the RC, you can just delete the directory it installed into (the GHC-7.8.xxxxx folder). Also make sure you remove the executables from $PATH

And no worries about any unnecessary work. I'm here to do the release after all, and feedback is helpful!

On Thursday, February 27, 2014, George Colpitts < george.colpitts@gmail.com> wrote:

...
Probably my error, I just wanted to make sure there wasn't a problem that was missed. Thanks for checking. Sorry for any confusion I caused.

Here are the details of what I did:

I took ghc-7.8.0.20140226-x86_64-apple-darwin-mavericks.tar.bz2 from http://www.haskell.org/ghc/dist/7.8.1-rc2/ and followed the instructions in the INSTALL file to install it, i.e.

One possible difference is that my gcc is gcc-4.8 from gnu not gcc from Apple.

Also my uname output is different than yours:

uname -a Darwin iMac27-5.local 13.1.0 Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64 x86_64

Finally I am running XCode 5.2

Is there a to uninstall or clean these RCs?

I'll wait for official notice before trying anything else

I really appreciate all your work and I'm sorry if I caused you any unnecessary work. I had no problems installing RC1 so may have been overconfident

On Thu, Feb 27, 2014 at 8:05 PM, Austin Seipp wrote:

I just tested this and cannot reproduce it:

$ cabal install vector ... building ...

$ ls /Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/vector-0.10.9.1 Data libHSvector-0.10.9.1-ghc7.8.0.20140226.dylib include libHSvector-0.10.9.1.a

$ ls /Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/primitive-0.5.2.1/ Control include libHSprimitive-0.5.2.1.a Data libHSprimitive-0.5.2.1-ghc7.8.0.20140226.dylib

$ uname -a Darwin Calcifer.local 13.0.0 Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64 x86_64

There is certainly a dylib available for both of these libraries. You're going to need to be very explicit in what you did to install GHC, and how. (Did you use the binary distribution I pulled from the server?)* Unfortunately I'm about to run out the door, and don't have time for the next few hours closely investigate.

* On another note, I will say that there is not an 'RC2' until I announce that it is so, to be completely honest. Right this second, some last minute fixes went into HEAD which will be merged for the actual RC2. Otherwise I would have released it today. But thank you for testing anyway!

...
corrected subject line

On Thu, Feb 27, 2014 at 7:47 PM, George Colpitts < george.colpitts@gmail.com> wrote:

...
Hi

After installing the first version of RC2 I ran into the following

...
...
cabal install vector Resolving dependencies... Configuring vector-0.10.9.1... ... [ 5 of 19] Compiling Data.Vector.Fusion.Stream.Monadic ( Data/Vector/Fusion/Stream/Monadic.hs, dist/build/Data/Vector/Fusion/Stream/Monadic.o ) Loading package ghc-prim ... linking ... done. Loading package integer-gmp ... linking ... done. Loading package base ... linking ... done. Loading package primitive-0.5.2.1 ... <command line>: can't load

.so/.DLL

...
for: libHSprimitive-0.5.2.1.dylib (dlopen(libHSprimitive-0.5.2.1.dylib, 9): image not found)

There seems to be a general problem that the install did not produce any dynamic libraries at least on the Mac:

ls /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/*/lib

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/cpphs-1.18.2/lib:

...
HScpphs-1.18.2.o Language Text libHScpphs-1.18.2.a

...
...
/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hashable-1.2.1.0/lib:

...
Data HShashable-1.2.1.0.o libHShashable-1.2.1.0.a libHShashable-1.2.1.0_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hscolour-1.20.3/lib:

...
HShscolour-1.20.3.o Language libHShscolour-1.20.3.a libHShscolour-1.20.3_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/primitive-0.5.2.1/lib:

...
Control HSprimitive-0.5.2.1.o libHSprimitive-0.5.2.1.a Data include libHSprimitive-0.5.2.1_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/syb-0.4.1/lib:

...
Data Generics HSsyb-0.4.1.o libHSsyb-0.4.1.a libHSsyb-0.4.1_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/text-1.1.0.0/lib:

...
Data HStext-1.1.0.0.o libHStext-1.1.0.0.a libHStext-1.1.0.0_p.a

/Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/unordered-containers-0.2.3.3/lib:

...
Data libHSunordered-containers-0.2.3.3.a HSunordered-containers-0.2.3.3.o

On Thu, Feb 27, 2014 at 5:53 PM, George Colpitts wrote: problem libHScpphs-1.18.2_p.a libHSunordered-containers-0.2.3.3_p.a

...
_______________________________________________ ghc-devs mailing list ghc-devs@haskell.org

-- Regards,

Austin Seipp, Haskell Consultant Well-Typed LLP, http://www.well-typed.com/

_______________________________________________ ghc-devs mailing list ghc-devs@haskell.org http://www.haskell.org/mailman/listinfo/ghc-devs

George Colpitts

28 Feb 28 Feb

9:13 a.m.

New subject: first version of RC2 has problems with lack of dynamic libraries at least on the Mac

Thanks for everybody's help. I got the latest versions of cabal, installed the "early" version of RC2 and then cabal install vector worked On Thu, Feb 27, 2014 at 10:37 PM, George Colpitts

...

wrote:

...

I am sad. How do I uninstall the current version I have and install that version?

Thanks

On Thu, Feb 27, 2014 at 10:27 PM, Carter Schonwald < carter.schonwald@gmail.com> wrote:

...
you need cabal-install 1.18 or you'll be sad.

On Thu, Feb 27, 2014 at 9:16 PM, George Colpitts < george.colpitts@gmail.com> wrote:

...
I'm using Cabal-1.18.1.3 and cabal-install version 1.16.0.2

On Thu, Feb 27, 2014 at 9:04 PM, Austin Seipp wrote:

...
Thanks. Another question is what version of Cabal you are using, as it knows how to build dylibs properly. I'm using cabal 1.18.

To delete the RC, you can just delete the directory it installed into (the GHC-7.8.xxxxx folder). Also make sure you remove the executables from $PATH

And no worries about any unnecessary work. I'm here to do the release after all, and feedback is helpful!

On Thursday, February 27, 2014, George Colpitts < george.colpitts@gmail.com> wrote:

...
Probably my error, I just wanted to make sure there wasn't a problem that was missed. Thanks for checking. Sorry for any confusion I caused.

Here are the details of what I did:

I took ghc-7.8.0.20140226-x86_64-apple-darwin-mavericks.tar.bz2 from http://www.haskell.org/ghc/dist/7.8.1-rc2/ and followed the instructions in the INSTALL file to install it, i.e.

One possible difference is that my gcc is gcc-4.8 from gnu not gcc from Apple.

Also my uname output is different than yours:

uname -a Darwin iMac27-5.local 13.1.0 Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64 x86_64

Finally I am running XCode 5.2

Is there a to uninstall or clean these RCs?

I'll wait for official notice before trying anything else

I really appreciate all your work and I'm sorry if I caused you any unnecessary work. I had no problems installing RC1 so may have been overconfident

On Thu, Feb 27, 2014 at 8:05 PM, Austin Seipp wrote:

I just tested this and cannot reproduce it:

$ cabal install vector ... building ...

$ ls /Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/vector-0.10.9.1 Data libHSvector-0.10.9.1-ghc7.8.0.20140226.dylib include libHSvector-0.10.9.1.a

$ ls /Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/primitive-0.5.2.1/ Control include libHSprimitive-0.5.2.1.a Data libHSprimitive-0.5.2.1-ghc7.8.0.20140226.dylib

$ uname -a Darwin Calcifer.local 13.0.0 Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64 x86_64

There is certainly a dylib available for both of these libraries. You're going to need to be very explicit in what you did to install GHC, and how. (Did you use the binary distribution I pulled from the server?)* Unfortunately I'm about to run out the door, and don't have time for the next few hours closely investigate.

* On another note, I will say that there is not an 'RC2' until I announce that it is so, to be completely honest. Right this second, some last minute fixes went into HEAD which will be merged for the actual RC2. Otherwise I would have released it today. But thank you for testing anyway!

...
corrected subject line

On Thu, Feb 27, 2014 at 7:47 PM, George Colpitts < george.colpitts@gmail.com> wrote: > > Hi > > After installing the first version of RC2 I ran into the following

...
> > cabal install vector > Resolving dependencies... > Configuring vector-0.10.9.1... > ... > [ 5 of 19] Compiling Data.Vector.Fusion.Stream.Monadic ( > Data/Vector/Fusion/Stream/Monadic.hs, > dist/build/Data/Vector/Fusion/Stream/Monadic.o ) > Loading package ghc-prim ... linking ... done. > Loading package integer-gmp ... linking ... done. > Loading package base ... linking ... done. > Loading package primitive-0.5.2.1 ... <command line>: can't load .so/.DLL > for: libHSprimitive-0.5.2.1.dylib (dlopen(libHSprimitive-0.5.2.1.dylib, 9): > image not found) > > There seems to be a general problem that the install did not

...
> dynamic libraries at least on the Mac: > > ls /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/*/lib > /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/cpphs-1.18.2/lib: > HScpphs-1.18.2.o Language Text libHScpphs-1.18.2.a

...
> > > /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hashable-1.2.1.0/lib: > Data HShashable-1.2.1.0.o libHShashable-1.2.1.0.a > libHShashable-1.2.1.0_p.a > > > /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hscolour-1.20.3/lib: > HShscolour-1.20.3.o Language libHShscolour-1.20.3.a > libHShscolour-1.20.3_p.a > > > /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/primitive-0.5.2.1/lib: > Control HSprimitive-0.5.2.1.o libHSprimitive-0.5.2.1.a > Data include libHSprimitive-0.5.2.1_p.a > > /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/syb-0.4.1/lib: > Data Generics HSsyb-0.4.1.o libHSsyb-0.4.1.a libHSsyb-0.4.1_p.a > > /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/text-1.1.0.0/lib: > Data HStext-1.1.0.0.o libHStext-1.1.0.0.a libHStext-1.1.0.0_p.a > > > /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/unordered-containers-0.2.3.3/lib: > Data libHSunordered-containers-0.2.3.3.a > HSunordered-containers-0.2.3.3.o

On Thu, Feb 27, 2014 at 5:53 PM, George Colpitts wrote: problem produce any libHScpphs-1.18.2_p.a libHSunordered-containers-0.2.3.3_p.a

...
_______________________________________________ ghc-devs mailing list ghc-devs@haskell.org

-- Regards,

Austin Seipp, Haskell Consultant Well-Typed LLP, http://www.well-typed.com/

_______________________________________________ ghc-devs mailing list ghc-devs@haskell.org http://www.haskell.org/mailman/listinfo/ghc-devs

Austin Seipp

10:51 a.m.

New subject: first version of RC2 has problems with lack of dynamic libraries at least on the Mac

Thanks George. Since this might be confusing for users, I'll add a note to to the release notes about requiring Cabal 1.18 for GHC to work properly. On Fri, Feb 28, 2014 at 8:13 AM, George Colpitts wrote:

...

Thanks for everybody's help. I got the latest versions of cabal, installed the "early" version of RC2 and then cabal install vector worked

On Thu, Feb 27, 2014 at 10:37 PM, George Colpitts wrote:

...
I am sad. How do I uninstall the current version I have and install that version?

Thanks

On Thu, Feb 27, 2014 at 10:27 PM, Carter Schonwald wrote:

...
you need cabal-install 1.18 or you'll be sad.

On Thu, Feb 27, 2014 at 9:16 PM, George Colpitts wrote:

...
I'm using Cabal-1.18.1.3 and cabal-install version 1.16.0.2

On Thu, Feb 27, 2014 at 9:04 PM, Austin Seipp wrote:

...
Thanks. Another question is what version of Cabal you are using, as it knows how to build dylibs properly. I'm using cabal 1.18.

To delete the RC, you can just delete the directory it installed into (the GHC-7.8.xxxxx folder). Also make sure you remove the executables from $PATH

And no worries about any unnecessary work. I'm here to do the release after all, and feedback is helpful!

On Thursday, February 27, 2014, George Colpitts wrote:

...
Probably my error, I just wanted to make sure there wasn't a problem that was missed. Thanks for checking. Sorry for any confusion I caused.

Here are the details of what I did:

I took ghc-7.8.0.20140226-x86_64-apple-darwin-mavericks.tar.bz2 from http://www.haskell.org/ghc/dist/7.8.1-rc2/ and followed the instructions in the INSTALL file to install it, i.e.

One possible difference is that my gcc is gcc-4.8 from gnu not gcc from Apple.

Also my uname output is different than yours:

uname -a Darwin iMac27-5.local 13.1.0 Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64 x86_64

Finally I am running XCode 5.2

Is there a to uninstall or clean these RCs?

I'll wait for official notice before trying anything else

I really appreciate all your work and I'm sorry if I caused you any unnecessary work. I had no problems installing RC1 so may have been overconfident

On Thu, Feb 27, 2014 at 8:05 PM, Austin Seipp wrote:

I just tested this and cannot reproduce it:

$ cabal install vector ... building ...

$ ls /Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/vector-0.10.9.1 Data libHSvector-0.10.9.1-ghc7.8.0.20140226.dylib include libHSvector-0.10.9.1.a

$ ls /Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/primitive-0.5.2.1/ Control include libHSprimitive-0.5.2.1.a Data libHSprimitive-0.5.2.1-ghc7.8.0.20140226.dylib

$ uname -a Darwin Calcifer.local 13.0.0 Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64 x86_64

There is certainly a dylib available for both of these libraries. You're going to need to be very explicit in what you did to install GHC, and how. (Did you use the binary distribution I pulled from the server?)* Unfortunately I'm about to run out the door, and don't have time for the next few hours closely investigate.

* On another note, I will say that there is not an 'RC2' until I announce that it is so, to be completely honest. Right this second, some last minute fixes went into HEAD which will be merged for the actual RC2. Otherwise I would have released it today. But thank you for testing anyway!

On Thu, Feb 27, 2014 at 5:53 PM, George Colpitts wrote: > corrected subject line > > > On Thu, Feb 27, 2014 at 7:47 PM, George Colpitts > > wrote: >> >> Hi >> >> After installing the first version of RC2 I ran into the following >> problem >> >> cabal install vector >> Resolving dependencies... >> Configuring vector-0.10.9.1... >> ... >> [ 5 of 19] Compiling Data.Vector.Fusion.Stream.Monadic ( >> Data/Vector/Fusion/Stream/Monadic.hs, >> dist/build/Data/Vector/Fusion/Stream/Monadic.o ) >> Loading package ghc-prim ... linking ... done. >> Loading package integer-gmp ... linking ... done. >> Loading package base ... linking ... done. >> Loading package primitive-0.5.2.1 ... <command line>: can't load >> .so/.DLL >> for: libHSprimitive-0.5.2.1.dylib >> (dlopen(libHSprimitive-0.5.2.1.dylib, 9): >> image not found) >> >> There seems to be a general problem that the install did not >> produce any >> dynamic libraries at least on the Mac: >> >> ls /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/*/lib >> >> /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/cpphs-1.18.2/lib: >> HScpphs-1.18.2.o Language Text libHScpphs-1.18.2.a >> libHScpphs-1.18.2_p.a >> >> >> >> /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hashable-1.2.1.0/lib: >> Data HShashable-1.2.1.0.o libHShashable-1.2.1.0.a >> libHShashable-1.2.1.0_p.a >> >> >> >> /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hscolour-1.20.3/lib: >> HShscolour-1.20.3.o Language libHShscolour-1.20.3.a >> libHShscolour-1.20.3_p.a >> >> >> >> /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/primitive-0.5.2.1/lib: >> Control HSprimitive-0.5.2.1.o libHSprimitive-0.5.2.1.a >> Data include libHSprimitive-0.5.2.1_p.a >> >> >> /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/syb-0.4.1/lib: >> Data Generics HSsyb-0.4.1.o libHSsyb-0.4.1.a libHSsyb-0.4.1_p.a >> >> >> /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/text-1.1.0.0/lib: >> Data HStext-1.1.0.0.o libHStext-1.1.0.0.a libHStext-1.1.0.0_p.a >> >> >> >> /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/unordered-containers-0.2.3.3/lib: >> Data libHSunordered-containers-0.2.3.3.a >> HSunordered-containers-0.2.3.3.o >> libHSunordered-containers-0.2.3.3_p.a > > > > _______________________________________________ > ghc-devs mailing list > ghc-devs@haskell.org

-- Regards,

Austin Seipp, Haskell Consultant Well-Typed LLP, http://www.well-typed.com/

_______________________________________________ ghc-devs mailing list ghc-devs@haskell.org http://www.haskell.org/mailman/listinfo/ghc-devs

-- Regards, Austin Seipp, Haskell Consultant Well-Typed LLP, http://www.well-typed.com/

Austin Seipp

5:42 p.m.

New subject: first version of RC2 has problems with lack of dynamic libraries at least on the Mac

I just committed this release note info to the users guide. Hopefully nobody else will trip over it. :) On Fri, Feb 28, 2014 at 9:51 AM, Austin Seipp wrote:

...

Thanks George. Since this might be confusing for users, I'll add a note to to the release notes about requiring Cabal 1.18 for GHC to work properly.

On Fri, Feb 28, 2014 at 8:13 AM, George Colpitts wrote:

...
Thanks for everybody's help. I got the latest versions of cabal, installed the "early" version of RC2 and then cabal install vector worked

On Thu, Feb 27, 2014 at 10:37 PM, George Colpitts wrote:

...
I am sad. How do I uninstall the current version I have and install that version?

Thanks

On Thu, Feb 27, 2014 at 10:27 PM, Carter Schonwald wrote:

...
you need cabal-install 1.18 or you'll be sad.

On Thu, Feb 27, 2014 at 9:16 PM, George Colpitts wrote:

...
I'm using Cabal-1.18.1.3 and cabal-install version 1.16.0.2

On Thu, Feb 27, 2014 at 9:04 PM, Austin Seipp wrote:

...
Thanks. Another question is what version of Cabal you are using, as it knows how to build dylibs properly. I'm using cabal 1.18.

To delete the RC, you can just delete the directory it installed into (the GHC-7.8.xxxxx folder). Also make sure you remove the executables from $PATH

And no worries about any unnecessary work. I'm here to do the release after all, and feedback is helpful!

On Thursday, February 27, 2014, George Colpitts wrote: > > Probably my error, I just wanted to make sure there wasn't a problem > that was missed. Thanks for checking. Sorry for any confusion I caused. > > Here are the details of what I did: > > I took ghc-7.8.0.20140226-x86_64-apple-darwin-mavericks.tar.bz2 from > http://www.haskell.org/ghc/dist/7.8.1-rc2/ and followed the instructions in > the INSTALL file to install it, i.e. > > One possible difference is that my gcc is gcc-4.8 from gnu not gcc > from Apple. > > Also my uname output is different than yours: > > uname -a > Darwin iMac27-5.local 13.1.0 Darwin Kernel Version 13.1.0: Thu Jan 16 > 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64 x86_64 > > > Finally I am running XCode 5.2 > > Is there a to uninstall or clean these RCs? > > I'll wait for official notice before trying anything else > > I really appreciate all your work and I'm sorry if I caused you any > unnecessary work. I had no problems installing RC1 so may have been > overconfident > > > On Thu, Feb 27, 2014 at 8:05 PM, Austin Seipp > wrote: > > I just tested this and cannot reproduce it: > > $ cabal install vector > ... building ... > > $ ls /Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/vector-0.10.9.1 > Data libHSvector-0.10.9.1-ghc7.8.0.20140226.dylib include > libHSvector-0.10.9.1.a > > $ ls > /Users/a/.cabal/lib/x86_64-osx-ghc-7.8.0.20140226/primitive-0.5.2.1/ > Control include libHSprimitive-0.5.2.1.a Data > libHSprimitive-0.5.2.1-ghc7.8.0.20140226.dylib > > $ uname -a > Darwin Calcifer.local 13.0.0 Darwin Kernel Version 13.0.0: Thu Sep 19 > 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64 x86_64 > > There is certainly a dylib available for both of these libraries. > You're going to need to be very explicit in what you did to install > GHC, and how. (Did you use the binary distribution I pulled from the > server?)* Unfortunately I'm about to run out the door, and don't have > time for the next few hours closely investigate. > > * On another note, I will say that there is not an 'RC2' until I > announce that it is so, to be completely honest. Right this second, > some last minute fixes went into HEAD which will be merged for the > actual RC2. Otherwise I would have released it today. But thank you > for testing anyway! > > On Thu, Feb 27, 2014 at 5:53 PM, George Colpitts > wrote: > > corrected subject line > > > > > > On Thu, Feb 27, 2014 at 7:47 PM, George Colpitts > > > > wrote: > >> > >> Hi > >> > >> After installing the first version of RC2 I ran into the following > >> problem > >> > >> cabal install vector > >> Resolving dependencies... > >> Configuring vector-0.10.9.1... > >> ... > >> [ 5 of 19] Compiling Data.Vector.Fusion.Stream.Monadic ( > >> Data/Vector/Fusion/Stream/Monadic.hs, > >> dist/build/Data/Vector/Fusion/Stream/Monadic.o ) > >> Loading package ghc-prim ... linking ... done. > >> Loading package integer-gmp ... linking ... done. > >> Loading package base ... linking ... done. > >> Loading package primitive-0.5.2.1 ... <command line>: can't load > >> .so/.DLL > >> for: libHSprimitive-0.5.2.1.dylib > >> (dlopen(libHSprimitive-0.5.2.1.dylib, 9): > >> image not found) > >> > >> There seems to be a general problem that the install did not > >> produce any > >> dynamic libraries at least on the Mac: > >> > >> ls /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/*/lib > >> > >> /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/cpphs-1.18.2/lib: > >> HScpphs-1.18.2.o Language Text libHScpphs-1.18.2.a > >> libHScpphs-1.18.2_p.a > >> > >> > >> > >> /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hashable-1.2.1.0/lib: > >> Data HShashable-1.2.1.0.o libHShashable-1.2.1.0.a > >> libHShashable-1.2.1.0_p.a > >> > >> > >> > >> /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/hscolour-1.20.3/lib: > >> HShscolour-1.20.3.o Language libHShscolour-1.20.3.a > >> libHShscolour-1.20.3_p.a > >> > >> > >> > >> /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/primitive-0.5.2.1/lib: > >> Control HSprimitive-0.5.2.1.o libHSprimitive-0.5.2.1.a > >> Data include libHSprimitive-0.5.2.1_p.a > >> > >> > >> /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/syb-0.4.1/lib: > >> Data Generics HSsyb-0.4.1.o libHSsyb-0.4.1.a libHSsyb-0.4.1_p.a > >> > >> > >> /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/text-1.1.0.0/lib: > >> Data HStext-1.1.0.0.o libHStext-1.1.0.0.a libHStext-1.1.0.0_p.a > >> > >> > >> > >> /Users/gcolpitts/Library/Haskell/ghc-7.8.0.20140226/lib/unordered-containers-0.2.3.3/lib: > >> Data libHSunordered-containers-0.2.3.3.a > >> HSunordered-containers-0.2.3.3.o > >> libHSunordered-containers-0.2.3.3_p.a > > > > > > > > _______________________________________________ > > ghc-devs mailing list > > ghc-devs@haskell.org

-- Regards,

Austin Seipp, Haskell Consultant Well-Typed LLP, http://www.well-typed.com/

_______________________________________________ ghc-devs mailing list ghc-devs@haskell.org http://www.haskell.org/mailman/listinfo/ghc-devs

-- Regards,

Austin Seipp, Haskell Consultant Well-Typed LLP, http://www.well-typed.com/

-- Regards, Austin Seipp, Haskell Consultant Well-Typed LLP, http://www.well-typed.com/

4217

Age (days ago)

4218

Last active (days ago)

List overview

Download

9 comments

3 participants

participants (3)

Austin Seipp
Carter Schonwald
George Colpitts

Re: first version of RC2 has problems with lack of dynamic libraries at least on the Mac

tags

participants (3)