CMM-to-ASM: Register allocation wierdness

newer
RE: [commit: ghc] master: Accept...

Harendra Kumar

12 Jun 2016 12 Jun '16

2:38 p.m.

Hi, I am implementing unicode normalization in Haskell. I challenged myself to match the performance with the best C/C++ implementation, the best being the ICU library. I am almost there, beating it in one of the benchmarks and within 30% for others. I am out of all application level tricks that I could think of and now need help from the compiler. I started with a bare minimum loop and adding functionality incrementally watching where the performance trips. At one point I saw that adding just one 'if' condition reduced the performance by half. I looked at what's going on at the assembly level. Here is a github gist of the assembly instructions executed in the fast path of the loop, corresponding cmm snippets and also the full cmm corresponding to the loop: https://gist.github.com/harendra-kumar/7d34c6745f604a15a872768e57cd2447 I have annotated the assembly code with labels matching the corresponding CMM. With the addition of another "if" condition the loop which was pretty simple till now suddenly got bloated with a lot of register reassignments. Here is a snippet of the register movements added: # _n4se: # swap r14 <-> r11 => 0x408d6b: mov %r11,0x98(%rsp) => 0x408d73: mov %r14,%r11 => 0x408d76: mov 0x98(%rsp),%r14 # reassignments # rbx -> r10 -> r9 -> r8 -> rdi -> rsi -> rdx -> rcx -> rbx => 0x408d7e: mov %rbx,0x90(%rsp) => 0x408d86: mov %rcx,%rbx => 0x408d89: mov %rdx,%rcx => 0x408d8c: mov %rsi,%rdx => 0x408d8f: mov %rdi,%rsi => 0x408d92: mov %r8,%rdi => 0x408d95: mov %r9,%r8 => 0x408d98: mov %r10,%r9 => 0x408d9b: mov 0x90(%rsp),%r10 . . . loop logic here which uses only %rax, %r10 and %r9 . . . . # _n4s8: # shuffle back to original assignments => 0x4090dc: mov %r14,%r11 => 0x4090df: mov %r9,%r10 => 0x4090e2: mov %r8,%r9 => 0x4090e5: mov %rdi,%r8 => 0x4090e8: mov %rsi,%rdi => 0x4090eb: mov %rdx,%rsi => 0x4090ee: mov %rcx,%rdx => 0x4090f1: mov %rbx,%rcx => 0x4090f4: mov %rax,%rbx => 0x4090f7: mov 0x88(%rsp),%rax => 0x4090ff: jmpq 0x408d2a The registers seem to be getting reassigned here, data flowing from one to the next. In this particular path a lot of these register movements seem unnecessary and are only undone at the end without being used. Maybe this is because these are reusable blocks and the movement is necessary when used in some other path? Can this be avoided? Or at least avoided in a certain fast path somehow by hinting the compiler? Any pointers to the GHC code will be appreciated. I am not yet much familiar with the GHC code but can dig deeper pretty quickly. But before that I hope someone knowledgeable in this area can shed some light on this at a conceptual level or if at all it can be improved. I can provide more details and experiment more if needed. Thanks, Harendra

Attachments:

attachment.html (text/html — 4.7 KB)

Show replies by date

Joachim Breitner

12 Jun 12 Jun

6:34 p.m.

Hi, Am Montag, den 13.06.2016, 00:08 +0530 schrieb Harendra Kumar:

...

Can this be avoided?

hopefully, and you already did some great analysis. But sometimes things are moving slow, so if nobody picks it up right away (I think think the number of people who know the register allocator is rather small), make sure you record your findings in a trac ticket, so that they are not lost. Greetings, Joachim -- Joachim “nomeata” Breitner mail@joachim-breitner.de • https://www.joachim-breitner.de/ XMPP: nomeata@joachim-breitner.de • OpenPGP-Key: 0xF0FBF51F Debian Developer: nomeata@debian.org

Harendra Kumar

13 Jun 13 Jun

1:46 a.m.

Sure, I will file a ticket once I have more clarity on the problem. BTW, I forgot to mention that this is with ghc-7.10.3. I will try to see how things stand with 8.0.1 at the assembly level though I have not seen any difference in the benchmark performance. I guess it is better to work off 8.0.1 anyway since things might have changed significantly. -harendra On 13 June 2016 at 04:04, Joachim Breitner wrote:

...

Hi,

Am Montag, den 13.06.2016, 00:08 +0530 schrieb Harendra Kumar:

...
Can this be avoided?

hopefully, and you already did some great analysis. But sometimes things are moving slow, so if nobody picks it up right away (I think think the number of people who know the register allocator is rather small), make sure you record your findings in a trac ticket, so that they are not lost.

Greetings, Joachim

--

Joachim “nomeata” Breitner mail@joachim-breitner.de • https://www.joachim-breitner.de/ XMPP: nomeata@joachim-breitner.de • OpenPGP-Key: 0xF0FBF51F Debian Developer: nomeata@debian.org

Harendra Kumar

3:29 a.m.

My earlier experiment was on GHC-7.10.3. I repeated this on GHC-8.0.1 and the assembly traced was exactly the same except for a marginal improvement. The 8.0.1 code generator removed the r14/r11 swap but the rest of the register ring shift remains the same. I have updated the github gist with the 8.0.1 trace: https://gist.github.com/harendra-kumar/7d34c6745f604a15a872768e57cd2447 thanks, harendra On 13 June 2016 at 00:08, Harendra Kumar wrote:

...

Hi,

I am implementing unicode normalization in Haskell. I challenged myself to match the performance with the best C/C++ implementation, the best being the ICU library. I am almost there, beating it in one of the benchmarks and within 30% for others. I am out of all application level tricks that I could think of and now need help from the compiler.

I started with a bare minimum loop and adding functionality incrementally watching where the performance trips. At one point I saw that adding just one 'if' condition reduced the performance by half. I looked at what's going on at the assembly level. Here is a github gist of the assembly instructions executed in the fast path of the loop, corresponding cmm snippets and also the full cmm corresponding to the loop:

https://gist.github.com/harendra-kumar/7d34c6745f604a15a872768e57cd2447

I have annotated the assembly code with labels matching the corresponding CMM.

With the addition of another "if" condition the loop which was pretty simple till now suddenly got bloated with a lot of register reassignments. Here is a snippet of the register movements added:

# _n4se: # swap r14 <-> r11 => 0x408d6b: mov %r11,0x98(%rsp) => 0x408d73: mov %r14,%r11 => 0x408d76: mov 0x98(%rsp),%r14

# reassignments # rbx -> r10 -> r9 -> r8 -> rdi -> rsi -> rdx -> rcx -> rbx => 0x408d7e: mov %rbx,0x90(%rsp) => 0x408d86: mov %rcx,%rbx => 0x408d89: mov %rdx,%rcx => 0x408d8c: mov %rsi,%rdx => 0x408d8f: mov %rdi,%rsi => 0x408d92: mov %r8,%rdi => 0x408d95: mov %r9,%r8 => 0x408d98: mov %r10,%r9 => 0x408d9b: mov 0x90(%rsp),%r10 . . . loop logic here which uses only %rax, %r10 and %r9 . . . . # _n4s8: # shuffle back to original assignments => 0x4090dc: mov %r14,%r11 => 0x4090df: mov %r9,%r10 => 0x4090e2: mov %r8,%r9 => 0x4090e5: mov %rdi,%r8 => 0x4090e8: mov %rsi,%rdi => 0x4090eb: mov %rdx,%rsi => 0x4090ee: mov %rcx,%rdx => 0x4090f1: mov %rbx,%rcx => 0x4090f4: mov %rax,%rbx => 0x4090f7: mov 0x88(%rsp),%rax

=> 0x4090ff: jmpq 0x408d2a

The registers seem to be getting reassigned here, data flowing from one to the next. In this particular path a lot of these register movements seem unnecessary and are only undone at the end without being used.

Maybe this is because these are reusable blocks and the movement is necessary when used in some other path?

Can this be avoided? Or at least avoided in a certain fast path somehow by hinting the compiler? Any pointers to the GHC code will be appreciated. I am not yet much familiar with the GHC code but can dig deeper pretty quickly. But before that I hope someone knowledgeable in this area can shed some light on this at a conceptual level or if at all it can be improved. I can provide more details and experiment more if needed.

Thanks, Harendra

Ben Gamari

16 Jun 16 Jun

4:29 a.m.

Harendra Kumar writes:

...

My earlier experiment was on GHC-7.10.3. I repeated this on GHC-8.0.1 and the assembly traced was exactly the same except for a marginal improvement. The 8.0.1 code generator removed the r14/r11 swap but the rest of the register ring shift remains the same. I have updated the github gist with the 8.0.1 trace:

Have you tried compiling with -fregs-graph [1] (the graph-coloring allocator)? By default GHC uses a very naive linear register allocator which I'd imagine may produce these sorts of results. At some point there was an effort to make -fregs-graph the default (see #2790) but it is unfortunately quite slow despite having a relatively small impact on produced-code quality in most cases. However, in your case it may be worth enabling. Note, however, that the graph coloring allocator has a few quirks of its own (see #8657 and #7697). It actually came to my attention while researching this that the -fregs-graph flag is currently silently ignored [2]. Unfortunately this means you'll need to build a new compiler if you want to try using it. Simon Marlow: If we really want to disable this option we should at very least issue an error when the user requests it. However, really it seems to me like we shouldn't disable it at all; why not just allow the user to use it and add a note to the documentation stating that the graph coloring allocator may fail with some programs and if it breaks the user gets to keep both pieces? All-in-all, the graph coloring allocator is in great need of some love; Harendra, perhaps you'd like to have a try at dusting it off and perhaps look into why it regresses in compiler performance? It would be great if we could use it by default. Cheers, - Ben [1] http://downloads.haskell.org/~ghc/master/users-guide//using-optimisation.htm... [2] https://git.haskell.org/ghc.git/commitdiff/f0a7261a39bd1a8c5217fecba56c593c3...

Harendra Kumar

6:53 a.m.

On 16 June 2016 at 13:59, Ben Gamari wrote:

...

It actually came to my attention while researching this that the -fregs-graph flag is currently silently ignored [2]. Unfortunately this means you'll need to build a new compiler if you want to try using it.

Yes I did try -fregs-graph and -fregs-iterative both. To debug why nothing changed I had to compare the executables produced with and without the flags and found them identical. A note in the manual could have saved me some time since that's the first place to go for help. I was wondering if I am making a mistake in the build and if it is not being rebuilt properly. Your note confirms my observation, it indeed does not change anything.

...

All-in-all, the graph coloring allocator is in great need of some love; Harendra, perhaps you'd like to have a try at dusting it off and perhaps look into why it regresses in compiler performance? It would be great if we could use it by default.

Yes, I can try that. In fact I was going in that direction and then stopped to look at what llvm does. llvm gave me impressive results in some cases though not so great in others. I compared the code generated by llvm and it perhaps did a better job in theory (used fewer instructions) but due to more spilling the end result was pretty similar. But I found a few interesting optimizations that llvm did. For example, there was a heap adjustment and check in the looping path which was redundant and was readjusted in the loop itself without use. LLVM either removed the redundant _adjustments_ in the loop or moved them out of the loop. But it did not remove the corresponding heap _checks_. That makes me wonder if the redundant heap checks can also be moved or removed. If we can do some sort of loop analysis at the CMM level itself and avoid or remove the redundant heap adjustments as well as checks or at least float them out of the cycle wherever possible. That sort of optimization can make a significant difference to my case at least. Since we are explicitly aware of the heap at the CMM level there may be an opportunity to do better than llvm if we optimize the generated CMM or the generation of CMM itself. A thought that came to my mind was whether we should focus on getting better code out of the llvm backend or the native code generator. LLVM seems pretty good at the specialized task of code generation and low level optimization, it is well funded, widely used and has a big community support. That allows us to leverage that huge effort and take advantage of the new developments. Does it make sense to outsource the code generation and low level optimization tasks to llvm and ghc focussing on higher level optimizations which are harder to do at the llvm level? What are the downsides of using llvm exclusively in future? -harendra

Karel Gardas

7:18 a.m.

On 06/16/16 12:53 PM, Harendra Kumar wrote:

...

A thought that came to my mind was whether we should focus on getting better code out of the llvm backend or the native code generator. LLVM seems pretty good at the specialized task of code generation and low level optimization, it is well funded, widely used and has a big community support. That allows us to leverage that huge effort and take advantage of the new developments. Does it make sense to outsource the code generation and low level optimization tasks to llvm and ghc focussing on higher level optimizations which are harder to do at the llvm level? What are the downsides of using llvm exclusively in future?

Good reading IMHO about the topic is here: https://ghc.haskell.org/trac/ghc/wiki/ImprovedLLVMBackend Cheers, Karel

Harendra Kumar

8:10 a.m.

That's a nice read, thanks for the pointer. I agree with the solution presented there. If we can do that it will be awesome. If help is needed I can spend some time on it. One of the things that I noticed is that the code can be optimized significantly if we know the common case so that we can optimize that path at the expense of less common path. At times I saw wild difference in performance just by a very small change in the source. I could attribute the difference to code blocks having moved and differently placed jump instructions or change in register allocations impacting the common case more. This could be avoided if we know the common case. The common case is not visible or obvious to low level tools. It is easier to write the code in a low level language like C such that it is closer to how it will run on the processor, we can also easily influence gcc from the source level. It is harder to do the same in a high level language like Haskell. Perhaps there is no point in doing so. What we can do instead is to use the llvm toolchain to perform feedback directed optimization and it will adjust the low level code accordingly based on your feedback runs. That will be entirely free since it can be done at the llvm level. My point is that it will pay off in things like that if we invest in integrating llvm better. -harendra On 16 June 2016 at 16:48, Karel Gardas wrote:

...

On 06/16/16 12:53 PM, Harendra Kumar wrote:

...
A thought that came to my mind was whether we should focus on getting better code out of the llvm backend or the native code generator. LLVM seems pretty good at the specialized task of code generation and low level optimization, it is well funded, widely used and has a big community support. That allows us to leverage that huge effort and take advantage of the new developments. Does it make sense to outsource the code generation and low level optimization tasks to llvm and ghc focussing on higher level optimizations which are harder to do at the llvm level? What are the downsides of using llvm exclusively in future?

Good reading IMHO about the topic is here: https://ghc.haskell.org/trac/ghc/wiki/ImprovedLLVMBackend

Cheers, Karel

Ben Gamari

8:37 a.m.

Ccing David Spitzenberg, who has thought about proc-point splitting, which is relevant for reasons that we will see below. Harendra Kumar writes:

...

On 16 June 2016 at 13:59, Ben Gamari wrote:

...
It actually came to my attention while researching this that the -fregs-graph flag is currently silently ignored [2]. Unfortunately this means you'll need to build a new compiler if you want to try using it.

Yes I did try -fregs-graph and -fregs-iterative both. To debug why nothing changed I had to compare the executables produced with and without the flags and found them identical. A note in the manual could have saved me some time since that's the first place to go for help. I was wondering if I am making a mistake in the build and if it is not being rebuilt properly. Your note confirms my observation, it indeed does not change anything.

Indeed; I've opened D2335 [1] to reenable -fregs-graph and add an appropriate note to the users guide.

...

...
All-in-all, the graph coloring allocator is in great need of some love; Harendra, perhaps you'd like to have a try at dusting it off and perhaps look into why it regresses in compiler performance? It would be great if we could use it by default.

Yes, I can try that. In fact I was going in that direction and then stopped to look at what llvm does. llvm gave me impressive results in some cases though not so great in others. I compared the code generated by llvm and it perhaps did a better job in theory (used fewer instructions) but due to more spilling the end result was pretty similar.

For the record, I have also struggled with register spilling issues in the past. See, for instance, #10012, which describes a behavior which arises from the C-- sinking pass's unwillingness to duplicate code across branches. While in general it's good to avoid the code bloat that this duplication implies, in the case shown in that ticket duplicating the computation would be significantly less code than the bloat from spilling the needed results.

...

But I found a few interesting optimizations that llvm did. For example, there was a heap adjustment and check in the looping path which was redundant and was readjusted in the loop itself without use. LLVM either removed the redundant _adjustments_ in the loop or moved them out of the loop. But it did not remove the corresponding heap _checks_. That makes me wonder if the redundant heap checks can also be moved or removed. If we can do some sort of loop analysis at the CMM level itself and avoid or remove the redundant heap adjustments as well as checks or at least float them out of the cycle wherever possible. That sort of optimization can make a significant difference to my case at least. Since we are explicitly aware of the heap at the CMM level there may be an opportunity to do better than llvm if we optimize the generated CMM or the generation of CMM itself.

Very interesting, thanks for writing this down! Indeed if these checks really are redundant then we should try to avoid them. Do you have any code you could share that demosntrates this? It would be great to open Trac tickets to track some of the optimization opportunities that you noted we may be missing. Trac tickets are far easier to track over longer durations than mailing list conversations, which tend to get lost in the noise after a few weeks pass.

...

A thought that came to my mind was whether we should focus on getting better code out of the llvm backend or the native code generator. LLVM seems pretty good at the specialized task of code generation and low level optimization, it is well funded, widely used and has a big community support. That allows us to leverage that huge effort and take advantage of the new developments. Does it make sense to outsource the code generation and low level optimization tasks to llvm and ghc focussing on higher level optimizations which are harder to do at the llvm level? What are the downsides of using llvm exclusively in future?

There is indeed a question of where we wish to focus our optimization efforts. However, I think using LLVM exclusively would be a mistake. LLVM is a rather large dependency that has in the past been rather difficult to track (this is why we now only target one LLVM release in a given GHC release). Moreover, it's significantly slower than our existing native code generator. There are a number of reasons for this, some of which are fixable. For instance, we currently make no effort to tell LLVM which passes are worth running and which we've handled; this is something which should be fixed but will require a rather significant investment by someone to determine how GHC's and LLVM's passes overlap, how they interact, and generally which are helpful (see GHC #11295). Furthermore, there are a few annoying impedance mismatches between Cmm and LLVM's representation. This can be seen in our treatment of proc points: when we need to take the address of a block within a function LLVM requires that we break the block into a separate procedure, hiding many potential optimizations from the optimizer. This was discussed further on this list earlier this year [2]. It would be great to eliminate proc-point splitting but doing so will almost certainly require cooperation from LLVM. Cheers, - Ben [1] https://phabricator.haskell.org/D2335 [2] https://mail.haskell.org/pipermail/ghc-devs/2015-November/010535.html

Harendra Kumar

17 Jun 17 Jun

5:09 a.m.

Thanks Ben! I have my responses inline below. On 16 June 2016 at 18:07, Ben Gamari wrote:

...

Indeed; I've opened D2335 [1] to reenable -fregs-graph and add an appropriate note to the users guide.

Thanks! That was quick.

...

For the record, I have also struggled with register spilling issues in the past. See, for instance, #10012, which describes a behavior which arises from the C-- sinking pass's unwillingness to duplicate code across branches. While in general it's good to avoid the code bloat that this duplication implies, in the case shown in that ticket duplicating the computation would be significantly less code than the bloat from spilling the needed results.

Not sure if this is possible but when unsure we can try both and compare if the duplication results in significantly more code than no duplication and make a decision based on that. Though that will slow down the compilation. Maybe we can bundle slower passes in something like -O3, meaning it will be slow and may or may not provide better results?

...

...
But I found a few interesting optimizations that llvm did. For example, there was a heap adjustment and check in the looping path which was redundant and was readjusted in the loop itself without use. LLVM either removed the redundant _adjustments_ in the loop or moved them out of the loop. But it did not remove the corresponding heap _checks_. That makes me wonder if the redundant heap checks can also be moved or removed. If we can do some sort of loop analysis at the CMM level itself and avoid or remove the redundant heap adjustments as well as checks or at least float them out of the cycle wherever possible. That sort of optimization can make a significant difference to my case at least. Since we are explicitly aware of the heap at the CMM level there may be an opportunity to do better than llvm if we optimize the generated CMM or the generation of CMM itself.

Very interesting, thanks for writing this down! Indeed if these checks really are redundant then we should try to avoid them. Do you have any code you could share that demosntrates this?

The gist that I provided in this email thread earlier demonstrates it. Here it is again: https://gist.github.com/harendra-kumar/7d34c6745f604a15a872768e57cd2447 If you look at the CMM trace in the gist. Start at label c4ic where we allocate space on heap (+48). Now, there are many possible paths from this point on some of those use the heap and some don't. I have marked those which use the heap by curly braces, the rest do not use it at all. 1) c4ic (allocate) -> c4mw -> {c4pv} -> ... 2) c4ic (allocate) -> c4mw -> c4pw -> ((c4pr -> ({c4pe} -> ... | c4ph -> ...)) | cp4ps -> ...) If we can place this allocation at both c4pv and c4pe instead of the common parent then we can save the fast path from this check. The same thing applies to the allocation at label c4jd as well. I have the code to produce this CMM, I can commit it on a branch and leave it in the github repository so that we can use it for fixing.

...

It would be great to open Trac tickets to track some of the optimization

Will do.

...

There is indeed a question of where we wish to focus our optimization efforts. However, I think using LLVM exclusively would be a mistake. LLVM is a rather large dependency that has in the past been rather difficult to track (this is why we now only target one LLVM release in a given GHC release). Moreover, it's significantly slower than our existing native code generator. There are a number of reasons for this, some of which are fixable. For instance, we currently make no effort to tell LLVM which passes are worth running and which we've handled; this is something which should be fixed but will require a rather significant investment by someone to determine how GHC's and LLVM's passes overlap, how they interact, and generally which are helpful (see GHC #11295).

Furthermore, there are a few annoying impedance mismatches between Cmm and LLVM's representation. This can be seen in our treatment of proc points: when we need to take the address of a block within a function LLVM requires that we break the block into a separate procedure, hiding many potential optimizations from the optimizer. This was discussed further on this list earlier this year [2]. It would be great to eliminate proc-point splitting but doing so will almost certainly require cooperation from LLVM.

It sounds like we need to continue with both for now and see how the llvm option pans out. There is clearly no reason for a decisive tilt towards llvm in near future. -harendra

Ben Gamari

19 Jun 19 Jun

4:33 a.m.

Harendra Kumar writes:

...

Thanks Ben! I have my responses inline below.

No worries!

...

On 16 June 2016 at 18:07, Ben Gamari wrote:

...
For the record, I have also struggled with register spilling issues in the past. See, for instance, #10012, which describes a behavior which arises from the C-- sinking pass's unwillingness to duplicate code across branches. While in general it's good to avoid the code bloat that this duplication implies, in the case shown in that ticket duplicating the computation would be significantly less code than the bloat from spilling the needed results.

Not sure if this is possible but when unsure we can try both and compare if the duplication results in significantly more code than no duplication and make a decision based on that. Though that will slow down the compilation. Maybe we can bundle slower passes in something like -O3, meaning it will be slow and may or may not provide better results?

Indeed this would be one option although I suspect we can do better. I have discussed the problem with a few people and have some ideas on how to proceed. Unfortunately I've been suffering from a chronic lack of time recently. snip

...

...
Very interesting, thanks for writing this down! Indeed if these checks really are redundant then we should try to avoid them. Do you have any code you could share that demosntrates this?

snip

...

I have the code to produce this CMM, I can commit it on a branch and leave it in the github repository so that we can use it for fixing.

Indeed it would be great if you could provide the program that produced this code.

...

...
It would be great to open Trac tickets to track some of the optimization

Will do.

Thanks!

...

...
Furthermore, there are a few annoying impedance mismatches between Cmm and LLVM's representation. This can be seen in our treatment of proc points: when we need to take the address of a block within a function LLVM requires that we break the block into a separate procedure, hiding many potential optimizations from the optimizer. This was discussed further on this list earlier this year [2]. It would be great to eliminate proc-point splitting but doing so will almost certainly require cooperation from LLVM.

It sounds like we need to continue with both for now and see how the llvm option pans out. There is clearly no reason for a decisive tilt towards llvm in near future.

I agree. Cheers, - Ben

Harendra Kumar

25 Jun 25 Jun

5:26 p.m.

On 19 June 2016 at 14:03, Ben Gamari wrote:

...

Indeed it would be great if you could provide the program that produced this code.

...
...
It would be great to open Trac tickets to track some of the optimization

Ok, I created an account on ghc trac and raised two tickets: #12231 & #12232. Yay! I also added the code branch to reproduce this on github ( https://github.com/harendra-kumar/unicode-transforms/tree/ghc-trac-12231). -harendra

Ben Gamari

26 Jun 26 Jun

4:53 a.m.

Harendra Kumar writes:

...

On 19 June 2016 at 14:03, Ben Gamari wrote:

...
Indeed it would be great if you could provide the program that produced this code.

...
...
It would be great to open Trac tickets to track some of the optimization

Ok, I created an account on ghc trac and raised two tickets: #12231 & #12232. Yay! I also added the code branch to reproduce this on github ( https://github.com/harendra-kumar/unicode-transforms/tree/ghc-trac-12231).

Great job summarizing the issue. Thanks! Cheers, - Ben

Simon Peyton Jones

16 Jun 16 Jun

8:10 a.m.

| All-in-all, the graph coloring allocator is in great need of some love; | Harendra, perhaps you'd like to have a try at dusting it off and perhaps | look into why it regresses in compiler performance? It would be great if | we could use it by default. I second this. Volunteers are sorely needed. Simon

3251

Age (days ago)

3265

Last active (days ago)

List overview

Download

13 comments

5 participants

participants (5)

Ben Gamari
Harendra Kumar
Joachim Breitner
Karel Gardas
Simon Peyton Jones

CMM-to-ASM: Register allocation wierdness

tags

participants (5)