August 2013 - ghc-tickets

[GHC] #8095: TypeFamilies painfully slow
by GHC 08 Mar '19

08 Mar '19

#8095: TypeFamilies painfully slow -------------------------------------+------------------------------------- Reporter: MikeIzbicki | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler (Type | Version: 7.6.3 checker) | Operating System: Unknown/Multiple Keywords: | Type of failure: Compile-time Architecture: Unknown/Multiple | performance bug Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: 5321 | -------------------------------------+------------------------------------- I'm using the TypeFamilies extension to generate types that are quite large. GHC can handle these large types fine when they are created manually, but when type families get involved, GHC's performance dies. Unlike in ticket #5321, using tail recursion does not eliminate the problem, and the order of arguments greatly affects compile time. I've attached a file Types.hs that demonstrates the problems. This file generates another Haskell file which has the problems. It takes 3 flags. The first is the size of the type to generate, the second is which type family function to use, and the third is whether to call the type family or just use a manually generated type. Here are my performance results: Using non-tail recursion, I get these results. I have to increase the stack size based on the size of the type I want to generate. {{{ $ ./Types 200 a a > test.hs && time ghc test.hs > /dev/null -fcontext- stack=250 real 0m2.973s $ ./Types 300 a a > test.hs && time ghc test.hs > /dev/null -fcontext- stack=350 real 0m6.018s $ ./Types 400 a a > test.hs && time ghc test.hs > /dev/null -fcontext- stack=450 real 0m9.995s $ ./Types 500 a a > test.hs && time ghc test.hs > /dev/null -fcontext- stack=550 real 0m15.645s }}} Tail recursion generates much slower compile times for some reason, and I still need to adjust the stack size: {{{ $ ./Types 200 b a > test.hs && time ghc test.hs > /dev/null -fcontext- stack=250 real 0m16.120s }}} Changing the order of arguments to the recursive type family greatly changes the run times: {{{ $ ./Types 200 c a > test.hs && time ghc test.hs > /dev/null -fcontext- stack=250 real 0m6.095s }}} Without the type family, I get MUCH better performance: {{{ $ ./Types 10000 a d > test.hs && time ghc test.hs > /dev/null real 0m2.271s }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8095> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 64

[GHC] #8109: Type family patterns should support as-patterns.
by GHC 09 Dec '18

09 Dec '18

#8109: Type family patterns should support as-patterns. ------------------------------------+------------------------------------- Reporter: carlhowells | Owner: Type: feature request | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- I recently wrote code similar to the following: {{{ {-# LANGUAGE DataKinds, ScopedTypeVariables, TypeOperators, TypeFamilies #-} {-# LANGUAGE PolyKinds, FlexibleInstances, FlexibleContexts #-} import GHC.TypeLits data P n = P fromNat :: forall (p :: Nat -> *) (n :: Nat). SingI n => p n -> Integer fromNat _ = fromSing (sing :: Sing n) class C (a :: [Nat]) where type T a :: * val :: p a -> T a instance SingI n => C '[n] where type T '[n] = Integer val _ = fromNat (P :: P n) instance (SingI n, C (n2 ': ns)) => C (n ': n2 ': ns) where type T (n ': n2 ': ns) = (Integer, T (n2 ': ns)) val _ = (fromNat (P :: P n), val (P :: P (n2 ': ns))) }}} There were semantic constraints in my case that made an empty list nonsensical, so it wasn't an appropriate base case. But the resulting effort in ensuring type family patterns didn't overlap got unwieldy. I would have much preferred to write that second instance more like this: {{{ instance (SingI n, C ns) => C (n ': ns@(_ ': _)) where type T (n ': ns) = (Integer, T ns) val _ = (fromNat (P :: P n), val (P :: P ns)) }}} The reasoning here is identical to as-patterns in value-level pattern matching. If you only want to match an expression when it has a particular sub-structure, it's way more convenient to do it with an as-pattern. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8109> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 8

[GHC] #8043: Feature Request : Qualified module exports
by GHC 01 Dec '18

01 Dec '18

#8043: Feature Request : Qualified module exports ------------------------------------+------------------------------------- Reporter: erikd | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.7 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: Other Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- I quite like the practice of using `-XNoImplicitPrelude` and then defining my own (often per-project) Prelude doing things like: {{{ module MyProject.Prelude ( module P ) import Data.Text as P (Text) import Prelude as P hiding (head, init, tail, last) }}} As an extension to the above idea, I would like to add qualified module exports defined so that I can do this: {{{ module MyProject.Prelude ( module P , qualified module T ) import Data.Text as P (Text) import Prelude as P hiding (head, init, tail, last) import qualified Data.Text as T }}} so that any file which imports `MyProject.Prelude` will then have all the identifiers that they would normally get if they did: {{{ import qualified Data.Text as T }}} Is this something that would have to go through the Haskell Next procedure? If so, how does one get that kicked off? -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8043> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 13

[GHC] #8177: Roles for type families
by GHC 29 Nov '18

29 Nov '18

#8177: Roles for type families ------------------------------------+------------------------------------- Reporter: simonpj | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- Now that we have [wiki:Roles roles], it might be helpful to be able to give a role signature for a data/type family. At the moment, data/type family constructors have all parameters conservatively assigned to be role `N`. Thus {{{ data family D a -- Parameter conservatively assumed to be N class C a where op :: D a -> a instance C Int where .... newtype N a = MkN a deriving( C ) -- Rejected }}} The generalised-newtype-deriving clause `deriving( C )` is rejected because `D` might use its parameter at role `N` thus: {{{ data instance D [b] = MkD (F b) -- F is a type function }}} It would be strictly more expressive if we could * '''Declare''' the roles of D's arguments (as we can declare their kinds). E.g. {{{ data family D a@R }}} * '''Check''' that each family instance obeys that role signature. E.g. given the preceding role signature, reject this instance: {{{ data instance D [b] = MkD (F b) -- F is a type function }}} I think there is no technical difficulty here. Just a question of doing it. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8177> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 41

[GHC] #8128: Standalone deriving fails for GADTs due to inaccessible code
by GHC 24 Jul '18

24 Jul '18

#8128: Standalone deriving fails for GADTs due to inaccessible code -------------------------------------+------------------------------------- Reporter: adamgundry | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler (Type | Version: 7.7 checker) | Operating System: Unknown/Multiple Keywords: | Type of failure: GHC rejects Architecture: Unknown/Multiple | valid program Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | -------------------------------------+------------------------------------- Consider the following: {{{ {-# LANGUAGE StandaloneDeriving, GADTs, FlexibleInstances #-} module StandaloneDerivingGADT where data T a where MkT1 :: T Int MkT2 :: (Bool -> Bool) -> T Bool deriving instance Show (T Int) }}} This gives the error: {{{ StandaloneDerivingGADT.hs:9:1: Couldn't match type ‛Int’ with ‛Bool’ Inaccessible code in a pattern with constructor MkT2 :: (Bool -> Bool) -> T Bool, in an equation for ‛showsPrec’ In the pattern: MkT2 b1 In an equation for ‛showsPrec’: showsPrec a (MkT2 b1) = showParen ((a >= 11)) ((.) (showString "MkT2 ") (showsPrec 11 b1)) When typechecking the code for ‛showsPrec’ in a standalone derived instance for ‛Show (T Int)’: To see the code I am typechecking, use -ddump-deriv In the instance declaration for ‛Show (T Int)’ }}} The derived instance declaration matches on all the constructors, even if they cannot possibly match. It should omit obviously inaccessible constructors so that this example is accepted. For reference, the derived code is: {{{ instance GHC.Show.Show (StandaloneDerivingGADT.T GHC.Types.Int) where GHC.Show.showsPrec _ StandaloneDerivingGADT.MkT1 = GHC.Show.showString "MkT1" GHC.Show.showsPrec a_aij (StandaloneDerivingGADT.MkT2 b1_aik) = GHC.Show.showParen ((a_aij GHC.Classes.>= 11)) ((GHC.Base..) (GHC.Show.showString "MkT2 ") (GHC.Show.showsPrec 11 b1_aik)) GHC.Show.showList = GHC.Show.showList__ (GHC.Show.showsPrec 0) }}} The same problem applies to other derivable classes (e.g. `Eq`). -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8128> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 15

[GHC] #8089: Implementation of GHC.Event.Poll.poll is broken due to bad coercion
by GHC 16 May '18

16 May '18

#8089: Implementation of GHC.Event.Poll.poll is broken due to bad coercion -------------------------------------------+------------------------------- Reporter: merijn | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: libraries/base | Version: 7.6.3 Keywords: patch | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Easy (less than 1 hour) | Type of failure: Runtime Blocked By: | crash Related Tickets: | Test Case: | Blocking: -------------------------------------------+------------------------------- Due to an unsafe coercion in GHC.Event.Poll.poll the implementation has a bug that on some platforms (.e.g. linux) results in subtly wrong semantics and on other platforms (e.g. OS X) downright crashes the runtime. The offending line is line 95 in GHC/Event/Poll.hsc: {{{ c_poll ptr (fromIntegral len) (fromIntegral (fromTimeout tout)) }}} `fromTimeout` returns a timeout in seconds as a value of type Int. `c_poll` takes a timeout in seconds as a value of type CInt. If the max value of Int is larger than that of CInt, this coercion results in an overflow, producing a negative value. The faulty semantics are in turn caused by passing this negative value as timeout to `c_poll`. This overflow happens on many 64bit platforms where GHC's Int is 64bit, but CInt is often 32bit. The result of passing a negative value to poll() depends on the platform, but is (on all platforms I checked) different from the desired semantics! On linux any negative timeouts are treated as infinite, this means that a poll() with a timeout that should be finite results in an infinitely blocking poll on linux! On OSX any negative timeout other than -1 (which is treated as infinity) is considered an invalid parameter, returning an error and crashing the runtime. A minimal example reproducing the error (on systems where `fromIntegral (maxBound :: Int) > (fromIntegral (maxBound :: CInt) :: Integer)`): {{{ import Control.Concurrent main = threadDelay maxBound }}} Using 64bit GHC on OSX this produces an immediate runtime crash. The attached patch solves the issue by comparing the Int timeout against the max value of CInt and, if necessary, looping multiple `c_poll` calls (with a timeout equal to `maxBound :: CInt`) if they return `0` (which indicates the timeout has expired with no events occurring). See also: https://github.com/merijn/packages- base/commit/6d8ea02a3f6a2cdb82a9ad786a8c4db780b92091 -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8089> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 22

[GHC] #8165: Use GeneralizedNewtypeDeriving to automatically create associated type families
by GHC 12 Apr '18

12 Apr '18

#8165: Use GeneralizedNewtypeDeriving to automatically create associated type families ------------------------------------+------------------------------------- Reporter: MikeIzbicki | Owner: Type: feature request | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- Here's a simple example: {{{ class C a where type T a instance C Int where type T Int = Bool newtype NT = NT Int deriving C }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8165> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 23

[GHC] #8118: <stdout>: commitAndReleaseBuffer: invalid argument (invalid character)
by GHC 10 Apr '18

10 Apr '18

#8118: <stdout>: commitAndReleaseBuffer: invalid argument (invalid character) ----------------------------------+---------------------------------- Reporter: guest | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.3 Keywords: | Operating System: OpenBSD Architecture: x86_64 (amd64) | Type of failure: Runtime crash Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ----------------------------------+---------------------------------- I get the following error... {{{ <stdout>: commitAndReleaseBuffer: invalid argument (invalid character) }}} When running following program: {{{#!haskell {-# LANGUAGE OverloadedStrings #-} import qualified Data.Text as T import qualified Data.Text.IO as T main = T.putStrLn "čušpajž日本語" }}} Was tested in #haskell and I have all the UTF-8 Settings set and so forth. It compiles just fine, but crashes during runtime. gcc -v: {{{ Reading specs from /usr/lib/gcc-lib/amd64-unknown-openbsd5.4/4.2.1/specs Target: amd64-unknown-openbsd5.4 Configured with: OpenBSD/amd64 system compiler Thread model: posix gcc version 4.2.1 20070719 }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8118> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 22

[GHC] #8171: Extending ExtendedDefaultRules
by GHC 02 Nov '17

02 Nov '17

#8171: Extending ExtendedDefaultRules ------------------------------------+------------------------------------- Reporter: ekmett | Owner: Type: feature request | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- The current `ExtendedDefaultRules` is set up in a way that largely prevents it from being used for scenarios beyond what they get used for in GHCi today. It would be great if there was an extra class that could be included in the list of acceptable classes for Rule 3. {{{ class Defaulting a }}} The proposed change would be that Rule 3 under EDR can be be relaxed to: At least one of the classes Ci is numeric, or is `Show`, `Eq`, `Ord` or `Defaulting`. I went with `Defaulting` rather than `Default`, because `Default` is a common class in use across the ecosystem from the `data-default` package, and I wanted to avoid gratuitous fallout. This would permit projects like Shae Erisson's `ghclive` from last year that need to use defaulting to not have to shoe-horn unnecessary `Show` constraints onto functions. Even better would be for that class to be polykinded! That opens up possibilities for expert users to get defaulting to fire on arguments of other kinds, which is impossible under the current EDR. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8171> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 14

[GHC] #8091: retry# lacks strictness information
by GHC 13 Sep '17

13 Sep '17

#8091: retry# lacks strictness information ------------------------------------+------------------------------------- Reporter: parcs | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- The `retry#` primop should be marked as returning bottom since it never actually returns anything as far as the simplifier is concerned. This change would help the simplifier eliminate unreachable code inside STM transactions. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8091> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 13