October 2014 - ghc-tickets

[GHC] #9710: Clean up Trac versions
by GHC 16 Sep '15

16 Sep '15

#9710: Clean up Trac versions -------------------------------------+------------------------------------- Reporter: goldfire | Owner: Type: task | Status: new Priority: normal | Milestone: Component: Build System | Version: 7.8.3 Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Unknown | Type of failure: Blocked By: | None/Unknown Related Tickets: | Test Case: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- The "Version" pull-down menu in Trac has no apparent ordering principle. This should be fixed. Even better, scrap many of the very old versions, as they're unsupported, anyway. Thanks! -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9710> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 3

[GHC] #9235: Simplifier ticks exhausted on recursive class method
by GHC 16 Sep '15

16 Sep '15

#9235: Simplifier ticks exhausted on recursive class method -----------------------------------+--------------------------------------- Reporter: klao | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.2 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: Compile-time crash Unknown/Multiple | Test Case: Difficulty: Unknown | Blocking: Blocked By: | Related Tickets: | -----------------------------------+--------------------------------------- GHC 7.8 and HEAD panic on the following code: {{{#!haskell module C where class C a where c :: C a => a -> Int c a = c a {-# INLINE c #-} instance C () x :: Int x = c () }}} Note that it's the coincidence of the 3 conditions that triggers this bug: 1. the `c` method has to be inlined (explicity or implicitly) 2. it has to be recursive (but, it doesn't have to be as dumbly recursive as in the example) 3. it has to have this weird, slightly mistaken type signature: `C a => a -> Int` instead of simply `a -> Int`. But, when this incidentally happens (in my case, both 2. ''and'' 3. were unintentional), the user gets a very hard to debug issue. They don't even get an indication which module is responsible if `c` is used from a different module than the one with the class definition. Also note that this happens even with a non-optimized build. And in this example `c` has to be explicitly marked NOINLINE to prevent it. (In the instance that I caught in the wild simply removing the INLINE annotation was enough.) Finally, on a side note: shouldn't 3. by itself be an error? Or a warning at least? -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9235> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 2

[GHC] #8168: ghc "Simplifier ticks exhausted" "When trying UnfoldingDone"
by GHC 16 Sep '15

16 Sep '15

#8168: ghc "Simplifier ticks exhausted" "When trying UnfoldingDone" -------------------------------------+------------------------------------- Reporter: sp55aa | Owner: Type: bug | Status: new Priority: high | Milestone: Component: Compiler | Version: 7.6.3 Keywords: Simplifier, | Operating System: Windows UnfoldingDone, simpl-tick-factor | Type of failure: GHC rejects Architecture: x86 | valid program Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | -------------------------------------+------------------------------------- ghc fail to compile this file: ---- begin Y.hs ---- newtype Rec a = Rec { unRec :: Rec a -> a } y :: (a -> a) -> a y = \f -> (\x -> f (unRec x x)) (Rec (\x -> f (unRec x x))) foo :: (a -> a) -> a -> a foo f n = f n main = print $ y foo 4 ---- end Y.hs ---- C:\Users\user\Desktop>ghc Y.lhs [1 of 1] Compiling Main ( Y.lhs, Y.o ) ghc: panic! (the 'impossible' happened) (GHC version 7.6.3 for i386-unknown-mingw32): Simplifier ticks exhausted When trying UnfoldingDone a_sqe{v} [lid] To increase the limit, use -fsimpl-tick-factor=N (default 100) If you need to do this, let GHC HQ know, and what factor you needed To see detailed counts use -ddump-simpl-stats Total ticks: 5601 Please report this as a GHC bug: http://www.haskell.org/ghc/reportabug -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8168> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 4

[GHC] #8689: confusing comment in compiler/main/SysTools.lhs
by GHC 16 Sep '15

16 Sep '15

#8689: confusing comment in compiler/main/SysTools.lhs ------------------------------------+------------------------------------- Reporter: carter | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.7 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- on line 341 {{{ -- Hans: this isn't right in general, but you can -- elaborate it in the same way as the others }}} I have NO idea what that comment is referring to -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8689> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 3

[GHC] #9636: Function with type error accepted
by GHC 16 Sep '15

16 Sep '15

#9636: Function with type error accepted -------------------------------------+------------------------------------- Reporter: augustss | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.3 Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Unknown | Type of failure: Blocked By: | None/Unknown Related Tickets: | Test Case: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- The following program is accepted by ghc even though it is clearly wrong. The type family T is closed so T Bool cannot ever be reduced, so it must be a type error. {{{#!hs {-# LANGUAGE TypeFamilies #-} module Err62 where type family T a where T Int = () x :: T Bool x = undefined f :: T Bool -> Bool f _ = True y :: Bool y = f x }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9636> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 29

[GHC] #8552: Rename StgArrWords to StgArrBytes
by GHC 15 Sep '15

15 Sep '15

#8552: Rename StgArrWords to StgArrBytes ------------------------------------+------------------------------------- Reporter: Tarrasch | Owner: Type: task | Status: new Priority: lowest | Milestone: Component: Compiler | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- Since #3800, `StgArrWords` contains a certain number of words and not bytes. One can easily forget this and make programming mistakes. For example if you try to store the number of words in the `bytes` field, the garbage collector won't honor your decision. (I learned the hard way :)) -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8552> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 7

[GHC] #9087: Executables in the 7.8.2 Linux i386 binary tarball are not stripped
by GHC 07 Sep '15

07 Sep '15

#9087: Executables in the 7.8.2 Linux i386 binary tarball are not stripped ----------------------------+-------------------------- Reporter: refold | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.2 Keywords: | Operating System: Linux Architecture: x86 | Type of failure: Other Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ----------------------------+-------------------------- At least on i386 Linux, the executables inside the GHC binary tarball seem to come with debug information. Stripping it noticeably reduces the binary sizes: {{{ $ file /path/to/ghc-7.8.2/lib/ghc-7.8.2/bin/ghc /path/to/ghc-7.8.2/lib/ghc-7.8.2/bin/ghc: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.26, BuildID[sha1]=0x6012a4c86cd3f410ca0e59ab4ac872ce740d03c6, not stripped $ du -sh /path/to/ghc-7.8.2/lib/ghc-7.8.2/bin/ghc 1,4M /path/to/ghc-7.8.2/lib/ghc-7.8.2/bin/ghc $ strip -s /path/to/ghc-7.8.2/lib/ghc-7.8.2/bin/ghc $ du -sh /path/to/ghc-7.8.2/lib/ghc-7.8.2/bin/ghc 1021K /path/to/ghc-7.8.2/lib/ghc-7.8.2/bin/ghc $ du -sh /path/to/ghc-7.8.2/lib/ghc-7.8.2/bin/haddock 3,2M /path/to/ghc-7.8.2/lib/ghc-7.8.2/bin/haddock $ strip -s /path/to/ghc-7.8.2/lib/ghc-7.8.2/bin/haddock $ du -sh /path/to/ghc-7.8.2/lib/ghc-7.8.2/bin/haddock 2,3M /path/to/ghc-7.8.2/lib/ghc-7.8.2/bin/haddock }}} Do we really need to include the debug info for exes? -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9087> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 8

[GHC] #9500: Allow GHC defaults to be modified with an environment variable
by GHC 07 Sep '15

07 Sep '15

#9500: Allow GHC defaults to be modified with an environment variable -------------------------------------+------------------------------------- Reporter: dfeuer | Owner: Type: feature request | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.2 Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Easy (less than 1 | Type of failure: hour) | None/Unknown Blocked By: | Test Case: Related Tickets: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- I wanted to do this to turn -fsimple-list-literals on and off for NoFib without editing a million makefiles or recompiling GHC, but I bet there are other reasons. GHC's validate should probably prompt the user to verify they want to continue of the variable is set, and should issue a loud warning at the very end indicating what options were set by the variable. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9500> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 5

[GHC] #8596: windows link failure due to excessively long gcc commad line "Unable to start C:\Program Files\Haskell + Platform\2013.2.0.0\mingw\bin/realgcc.exe (error code: 87)"
by GHC 06 Sep '15

06 Sep '15

#8596: windows link failure due to excessively long gcc commad line "Unable to start C:\Program Files\Haskell + Platform\2013.2.0.0\mingw\bin/realgcc.exe (error code: 87)" ----------------------------+--------------------------------- Reporter: joeyhess | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.3 Keywords: | Operating System: Windows Architecture: x86 | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ----------------------------+--------------------------------- I have a program (git-annex) which builds successfully on windows, but when I enable any of three optional features which pull in some additional libraries, it fails to link. I will attach the output of cabal build --ghc-options=-v for a failing and a successful build. I hypothesize this is due to a command line length limit. The final failing gcc link command is 43814 characters, vs 30765 in the configuration that succeeds. Right around the 32k boundry. Not sure what I can do to work around this, short of splitting up my program into standalone libraries which will link without referencing every individual module? -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8596> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 12

[GHC] #8614: Duplicate symbol error when loading text twice
by GHC 05 Sep '15

05 Sep '15

#8614: Duplicate symbol error when loading text twice ------------------------------------+------------------------------------- Reporter: nh2 | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: GHCi crash Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- We are developing some FFI binding to some Kinect Camera library, and came across the following: {{{ GHCi, version 7.6.3: http://www.haskell.org/ghc/ :? for help Loading package ghc-prim ... linking ... done. Loading package integer-gmp ... linking ... done. Loading package base ... linking ... done. Prelude> import Honi Prelude Honi> import Honi.Types Prelude Honi Honi.Types> initialize 2 Loading package array-0.4.0.1 ... linking ... done. Loading package deepseq-1.3.0.1 ... linking ... done. Loading package bytestring-0.10.0.2 ... linking ... done. Loading package text-0.11.3.1 ... linking ... done. Loading package honi-0.1.0.0 ... can't load .so/.DLL for: libfreenect.so (libfreenect.so: cannot open shared object file: No such file or directory) Prelude Honi Honi.Types> Right [d] <- getDeviceList Loading package array-0.4.0.1 ... linking ... done. Loading package deepseq-1.3.0.1 ... linking ... done. Loading package bytestring-0.10.0.2 ... linking ... done. Loading package text-0.11.3.1 ... GHCi runtime linker: fatal error: I found a duplicate definition for symbol __stginit_textzm0zi11zi3zi1_DataziText whilst processing object file /home/niklas/.cabal/lib/x86_64-linux- ghc-7.6.3/text-0.11.3.1/libHStext-0.11.3.1.a This could be caused by: * Loading two different object files which export the same symbol * Specifying the same object file twice on the GHCi command line * An incorrect `package.conf' entry, causing some object to be loaded twice. GHCi cannot safely continue in this situation. Exiting now. Sorry. }}} Apparently, ghci has no problem linking packages like array and deepseq twice, but when it comes across loading text another time, we get this duplicate symbol error. Does this make sense? Why does it not detect that text is already linked, like for the other packages? -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8614> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 5