December 2014 - ghc-tickets

[GHC] #9370: large blowup in memory usage and time when doing parallel build of xmlhtml package
by GHC 08 Feb '19

08 Feb '19

#9370: large blowup in memory usage and time when doing parallel build of xmlhtml package -------------------------------------+------------------------------------- Reporter: carter | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.3 Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Unknown | Type of failure: Blocked By: | None/Unknown Related Tickets: | Test Case: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- I've observed a blowup in ghc memory usage when invoked with parallel build flags. to reproduce {{{ cabal get xmlhtml-0.2.3.2 cabal install xmlhtml-0.2.3.2 --only-dependencies cd xmlhtml-0.2.3.2 }}} then {{{ cabal clean ; cabal configure --ghc-options="-j4" ; time cabal build -j4 -v3 }}} will take quite a while and use > 1gb of ram whereas {{{ cabal clean ; cabal configure --ghc-options="-j1 ; time cabal build -j1 -v3 }}} will use < 150mb of ram. Based upon the output of cabal build -j4 -v3, it looks like the parallel build is spending a lottt more time in the simplifier passes. I'm not sure what changes between the parallel and sequential builds to change this. I'll try to dig into this more in a few days, but recording this problem now before i forget. (though of course any insights would be appreciated) -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9370> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 48

[GHC] #8635: GHC optimisation flag ignored when importing a local module with derived type classes
by GHC 08 Feb '19

08 Feb '19

#8635: GHC optimisation flag ignored when importing a local module with derived type classes ------------------------------------+------------------------------------- Reporter: NeilMitchell | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- Given Foo.hs and Bar.hs: {{{ module Foo where data Food = Food -- deriving Eq {-# OPTIONS_GHC -O2 -ddump-simpl #-} module Bar where import Foo bar :: Int -> Bool bar x = x == 72 }}} If I run: {{{ ghc --make Bar -fforce-recomp }}} I get (snipped): {{{ Bar.bar = \ (x_afk :: GHC.Types.Int) -> case x_afk of _ { GHC.Types.I# x1_alo -> case x1_alo of _ { __DEFAULT -> GHC.Types.False; 72 -> GHC.Types.True } } }}} `bar` now looks pretty well optimised. However, if I uncomment the `deriving Eq` I get: {{{ Bar.bar1 = GHC.Types.I# 72 Bar.bar2 = GHC.Classes.== @ GHC.Types.Int GHC.Classes.$fEqInt Bar.bar = \ (x_amD :: GHC.Types.Int) -> Bar.bar2 x_amD Bar.bar1 }}} Now `bar` looks like terrible code, using dictionaries, boxing etc. It seems adding `deriving` in the imported and unused module makes it ignore the optimisation level. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8635> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 6

[GHC] #9693: Reloading GHCi with Template Haskell names can panic GHC
by GHC 03 Feb '19

03 Feb '19

#9693: Reloading GHCi with Template Haskell names can panic GHC -------------------------------------+------------------------------------- Reporter: maxs | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.3 Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Unknown | Type of failure: GHC Blocked By: | rejects valid program Related Tickets: | Test Case: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- First, load the following program into GHCi. '''Fun.hs''' {{{#!hs module Fun where import Language.Haskell.TH stuff = do -- let x = mkName "X" x <- newName "X" sequence $ [dataD (return []) x [] [ normalC x [] ] []] }}} '''thbug.hs''' {{{#!hs {-# LANGUAGE TemplateHaskell #-} import Fun stuff }}} Then comment out the newName, un comment the mkName and reload GHCi. {{{ ghc: panic! (the 'impossible' happened) (GHC version 7.8.3 for x86_64-apple-darwin): kcLookupKind APromotionErr RecDataConPE Please report this as a GHC bug: http://www.haskell.org/ghc/reportabug }}} It is important to note this is a valid program, if you then close GHCi and start it again with the modified file, it will load correctly. Reloading after attempting to compile the newName version will cause a panic. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9693> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 11

[GHC] #9173: Better type error messages
by GHC 27 Jan '19

27 Jan '19

#9173: Better type error messages ------------------------------------+------------------------------------- Reporter: simonpj | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.2 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- Generating better type-error messages is a hoary chestnut, but Herbert brought my attention to [https://pay.reddit.com/r/haskell/comments/26tcrk/curious_with_a_bit_of_begi… this thread on reddit], which has the following idea. At the moment, from {{{ module Foo where addThree = \x -> x + 3 :: Int y = addThree $ Just 5 }}} we get this error: {{{ Foo.hs:2:20 Couldn't match expected type `Int' with actual type `Maybe a0' In the return type of a call of `Just' In the second argument of `($)', namely `Just 5' In the expression: addThree $ Just 5 }}} Maybe we could generate this instead {{{ Foo.hs:2:20 inferred: "Just 5" has type "Maybe a0" expected: second argument of "($)" must have type "Int" in the expression: addThree $ Just 5 }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9173> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 37

[GHC] #9476: Implement late lambda-lifting
by GHC 25 Jan '19

25 Jan '19

#9476: Implement late lambda-lifting -------------------------------------+------------------------------------- Reporter: simonpj | Owner: Type: feature request | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.2 Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Unknown | Type of failure: Blocked By: | None/Unknown Related Tickets: | Test Case: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- This ticket exists to coordinate work on Nick Frisby's '''late lambda- lifting''' optimisation. * Wiki page: [wiki:LateLamLift]. All the details are here. * Branch in GHC repo: `wip/llf` * Related tickets * #9279: local closure remains in final program * #9374: static argument transformation -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9476> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 82

[GHC] #9251: ghc does not expose brancheless max/min operations as primops
by GHC 22 Jan '19

22 Jan '19

#9251: ghc does not expose brancheless max/min operations as primops ------------------------------------+------------------------------------- Reporter: carter | Owner: carter Type: task | Status: new Priority: normal | Milestone: 7.10.1 Component: Compiler | Version: 7.8.2 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: #9246 | ------------------------------------+------------------------------------- It was pointed out in #9246 that GHC currently does not expose primops for Max and Min on various unlifted types such as Float# and Double# and Int# and Word#, but that on most modern CPU architectures there is instruction level support for these operations. (Eg, Float# and #Double min and max can be provided on any 64bit x86 system pretty easily ) This ticket is to track doing that task. I'll probably do it one of the next two weekends to get back in the GHC hacking groove, or maybe this should be used as a "getting started" ticket for a new contributor? -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9251> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 23

[GHC] #9279: Optimisation bug
by GHC 18 Jan '19

18 Jan '19

#9279: Optimisation bug ------------------------------+-------------------------------------------- Reporter: simonmar | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.2 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: Runtime performance bug Unknown/Multiple | Test Case: Difficulty: Unknown | Blocking: Blocked By: | Related Tickets: | ------------------------------+-------------------------------------------- I have a strange problem with a local function binding that is not being inlined. I've attached the repro code, build it like this: {{{ $ ghc -O2 Haxl/Core/Monad.hs }}} There are several modules, but the one with the problem is `Haxl/Core/Monad.hs`. In particular `Haxl.Core.Monad.$fApplicativeGenHaxl2`, which contains this fragment: {{{ let { $wa4_s6YQ $wa4_s6YQ = \ w_s6YF _ ww1_s6YM _ _ w1_s6YI -> case GHC.Prim.readMutVar# ipv7_X5Ne w1_s6YI of _ { (# ipv10_X5QO, ipv11_X5QQ #) -> case ipv11_X5QQ of _ { Haxl.Core.Monad.IVarFull a2_a3kK -> case lvl6_r7qi of wild3_00 { }; Haxl.Core.Monad.IVarEmpty dt2_d4Vs -> case GHC.Prim.writeMutVar# ipv7_X5Ne (Haxl.Core.Monad.IVarFull w_s6YF) ipv10_X5QO of s2#_a5OR { __DEFAULT -> case GHC.Prim.readMutVar# dt2_d4Vs s2#_a5OR of _ { (# ipv12_X5R0, ipv13_X5R2 #) -> case GHC.Prim.readMutVar# ww1_s6YM ipv12_X5R0 of _ { (# ipv14_X5SS, ipv15_X5SU #) -> letrec { go_a5ti go_a5ti = \ ds10_a5tj -> case ds10_a5tj of _ { [] -> ipv15_X5SU; : y_a5to ys_a5tp -> GHC.Types.: (y_a5to w_s6YF) (go_a5ti ys_a5tp) }; } in case go_a5ti ipv13_X5R2 of x'_a5P6 { __DEFAULT -> case GHC.Prim.writeMutVar# ww1_s6YM x'_a5P6 ipv14_X5SS of s2#1_a5P7 { __DEFAULT -> (# s2#1_a5P7, Haxl.Core.Monad.cacheRequest6 #) } } } } } } } } in let { a2_s6lH a2_s6lH = \ w_s6YF _ w2_s6YH w3_s6YI -> case w2_s6YH of _ { Haxl.Core.Monad.SchedState ww1_s6YL ww2_s6YM ww3_s6YN ww4_s6YO -> $wa4_s6YQ w_s6YF ww1_s6YL ww2_s6YM ww3_s6YN ww4_s6YO w3_s6YI } } in }}} I want `$wa4` to be inlined at its single occurrence in `a2`. I believe the reason it is not being inlined is that `a2` is a wrapper, but the situation seems silly because the wrapper isn't going away either, so we have a redundant closure being built (this is in my inner loop). -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9279> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 26

[GHC] #8326: Place heap checks common in case alternatives before the case
by GHC 07 Jan '19

07 Jan '19

#8326: Place heap checks common in case alternatives before the case ------------------------------------+------------------------------------- Reporter: jstolarek | Owner: Type: task | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.7 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: 8317 Related Tickets: #1498 | ------------------------------------+------------------------------------- We would like to have functions that check whether an `Int#` is a valid tag to represent `Bool` (see Note [Optimizing isTrue#] in ghc-prim): {{{ isTrue# :: Int# -> Bool isTrue# 1# = True isTrue# _ = False isFalse# :: Int# -> Bool isFalse# 0# = True isFalse# _ = False }}} We could use them with comparison primops like this: {{{ f :: Int# -> Int f x | isTrue# (x ># 0#) = I# x | otherwise = -(I# x) }}} `isTrue#` is optimized away at the Core level: {{{ A.f = \ (x_aqM :: GHC.Prim.Int#) -> case GHC.Prim.># x_aqM 0 of _ { __DEFAULT -> GHC.Types.I# (GHC.Prim.negateInt# x_aqM); 1 -> GHC.Types.I# x_aqM } }}} but the code genrator produces very bad Cmm code, because it pushes heap checks into case alternatives: {{{ {offset cFd: // stack check if ((Sp + -16) < SpLim) goto cFr; else goto cFs; cFr: // not enough place on the stack, call GC R2 = R2; R1 = A.f_closure; call (stg_gc_fun)(R2, R1) args: 8, res: 0, upd: 8; cFs: // scrutinize (x ># 0#) _sEU::I64 = R2; _sEV::I64 = %MO_S_Gt_W64(R2, 0); if (_sEV::I64 != 1) goto cFg; else goto cFo; cFg: // False branch Hp = Hp + 16; if (Hp > HpLim) goto cFy; else goto cFx; cFy: // not enough heap, call GC HpAlloc = 16; I64[Sp - 16] = cFf; R1 = _sEV::I64; I64[Sp - 8] = _sEU::I64; Sp = Sp - 16; call stg_gc_unbx_r1(R1) returns to cFf, args: 8, res: 8, upd: 8; cFf: // re-do the False branch _sEU::I64 = I64[Sp + 8]; Sp = Sp + 16; _sEV::I64 = R1; goto cFg; cFx: // RHS of False branch I64[Hp - 8] = GHC.Types.I#_con_info; I64[Hp] = -_sEU::I64; R1 = Hp - 7; call (P64[Sp])(R1) args: 8, res: 0, upd: 8; cFo: // True branch Hp = Hp + 16; if (Hp > HpLim) goto cFv; else goto cFu; cFv: // not enough heap, call GC HpAlloc = 16; I64[Sp - 16] = cFn; R1 = _sEV::I64; I64[Sp - 8] = _sEU::I64; Sp = Sp - 16; call stg_gc_unbx_r1(R1) returns to cFn, args: 8, res: 8, upd: 8; cFn: // re-do the True branch _sEU::I64 = I64[Sp + 8]; Sp = Sp + 16; _sEV::I64 = R1; goto cFo; cFu: // RHS of True branch I64[Hp - 8] = GHC.Types.I#_con_info; I64[Hp] = _sEU::I64; R1 = Hp - 7; call (P64[Sp])(R1) args: 8, res: 0, upd: 8; } }}} This results in average 2.5% increase in binary size. By contrast, if we use `tagToEnum#` instead of `isTrue#` heap check will be placed before `case` expression and the code will be significantly shorter (this is done by a special case-on-bool optimization in the code generator - see #8317). What we would like to do here is: 1. compile case alternatives without placing heap checks inside them 2. each compiled alternative should return amount of heap it needs to allocate 3. code generator inspects amounts of heap needed by each alternative and either adds heap checks in alternatives or puts a single check before the case expression. Getting this right might be a bit tricky. 1. if all branches allocate some heap then we can just put a common heap check before the case. Note that we must allocate the higgest amount required by any of the alternatives and then alternatives that use less heap must retract the heap pointer accordingly. 2. if we have two alternatives, one of which allocates heap and the other does not, we should place the heap check only in the alternative that allocates the stack. This will solve #1498. 3. it is not clear to me what to do if we have combination of the above (more than one branch that allocates heap and at least one branch that does not). If we place heap check before the `case` expression we lose optimization of recursive functions and face the problem described in #1498. If we push heap checks into branches that allocate heap then we get code duplication, i.e. the problem that we're addressing in this ticket. I guess the only way to make correct decission here is to try different aproaches and measure their performance. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8326> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 48

[GHC] #8611: nofib’s cacheprof’s allocations nondeterminisitic
by GHC 01 Jan '19

01 Jan '19

#8611: nofib’s cacheprof’s allocations nondeterminisitic -----------------------------------------+--------------------------------- Reporter: nomeata | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: NoFib benchmark suite | Version: 7.6.3 Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Unknown | Type of failure: None/Unknown Blocked By: | Test Case: Related Tickets: | Blocking: -----------------------------------------+--------------------------------- This seems to be neither expected nor desired, and hence worth investigating: {{{ ./cacheprof +RTS -t <<ghc: 127588752 bytes, 243 GCs, 2261288/6551032 avg/max bytes residency (6 samples), 15M in use, 0.00 INIT (0.00 elapsed), 0.12 MUT (0.12 elapsed), 0.05 GC (0.05 elapsed) :ghc>> ./cacheprof +RTS -t <<ghc: 127392144 bytes, 242 GCs, 2261304/6551576 avg/max bytes residency (6 samples), 15M in use, 0.00 INIT (0.00 elapsed), 0.11 MUT (0.11 elapsed), 0.04 GC (0.05 elapsed) :ghc>> }}} The allocations numbers change, when they shoudn’t. Reproduced with 7.6.3 and current HEAD. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8611> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 16

[GHC] #8316: GHCi debugger segfaults when trying force a certain variable
by GHC 28 Dec '18

28 Dec '18

#8316: GHCi debugger segfaults when trying force a certain variable ------------------------------------+------------------------------------- Reporter: guest | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: GHCi | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: GHCi crash Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- The file Test.hs has following definitions: {{{ whnf :: a -> IO () whnf a = a `seq` (return ()) foo :: [Int] foo = [1..] }}} Calling ghci as: {{{ ghci Test.hs -ignore-dot-ghci }}} and bebugging foo like this: {{{ *Main> :b foo Breakpoint 0 activated at Test.hs:5:7-11 *Main> foo Stopped at Test.hs:5:7-11 _result :: [Int] = _ [Test.hs:5:7-11] *Main> :p foo foo = (_t1::[Int]) [Test.hs:5:7-11] *Main> whnf _t1 }}} results in this segault: {{{ <interactive>: internal error: TSO object entered! (GHC version 7.6.3 for x86_64_unknown_linux) Please report this as a GHC bug: http://www.haskell.org/ghc/reportabug [1] 5445 abort (core dumped) ghci Test.hs -ignore-dot-ghci }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8316> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 25