June 2014 - ghc-tickets

[GHC] #8539: Data.Complex shouldn't use default implementation of (**)
by GHC 23 Feb '15

23 Feb '15

#8539: Data.Complex shouldn't use default implementation of (**) -------------------------------------+------------------------------------- Reporter: jjaredsimpson | Owner: Type: bug | Status: new Priority: low | Milestone: Component: Prelude | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: Incorrect result Difficulty: Easy (less than 1 | at runtime hour) | Test Case: Blocked By: | Blocking: Related Tickets: | -------------------------------------+------------------------------------- {{{ Prelude Data.Complex> 0**2 0.0 Prelude Data.Complex> 0**2 :: Complex Double NaN :+ NaN Prelude Data.Complex> exp $ 2 * log 0 :: Complex Double NaN :+ NaN Prelude Data.Complex> log 0 :: Complex Double (-Infinity) :+ 0.0 Prelude Data.Complex> 2 * it :: Complex Double (-Infinity) :+ NaN Prelude Data.Complex> exp it :: Complex Double NaN :+ NaN }}} So Complex uses the default implementation of (!**). Then when 2*(-inf :+ 0) is evaluated. We do (2 * -inf - 0*0) :+ (2*0 + -inf*0). Which because of -inf*0 sets the imaginary part to NaN. Then exp (-inf :+ NaN) = exp x cos y :+ exp x sin y which becomes 0 * cos NaN :+ 0 * sin NaN. So we end up with NaN :+ NaN. Ross Paterson suggested: I would say the default implementation of (!**) is wrong: to match the Float/Double instances it should be x !** y = if x == 0 then 0 else exp (log x * y) -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8539> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 44

[GHC] #8309: traceEvent truncates to 512 bytes
by GHC 23 Feb '15

23 Feb '15

#8309: traceEvent truncates to 512 bytes ------------------------------------+------------------------------------- Reporter: duncan | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Runtime System | Version: 7.6.3 Keywords: eventlog tracing | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- The `Debug.Trace.traceEvent` (& `traceEventIO`) use a code path that unnecessarily uses printf format strings and uses a fixed size 512-byte buffer, hence truncating all user trace messages at that size. Here is the call path: * `Debug.Trace.traceEvent` (& `traceEventIO`) call `traceEvent#` primop * cmm impl of the primop `stg_traceEventzh` calls C RTS function `traceUserMsg` * `traceUserMsg` calls `traceFormatUserMsg(cap, "%s", msg);`, using the printf format string * `traceFormatUserMsg` uses `postUserMsg` which eventually calls `postLogMsg` * `postLogMsg` does the printf stuff Here's what `postLogMsg` does: {{{ #define BUF 512 void postLogMsg(EventsBuf *eb, EventTypeNum type, char *msg, va_list ap) { char buf[BUF]; nat size; size = vsnprintf(buf,BUF,msg,ap); if (size > BUF) { buf[BUF-1] = '\0'; size = BUF; } .... }}} This is obviously designed for RTS-internal users, not the user path. So the problem starts with this bit: {{{ void traceUserMsg(Capability *cap, char *msg) { traceFormatUserMsg(cap, "%s", msg); } }}} It just should not use that code path. It should call something that directly posts the message, without any silly printf strings. In fact, the code path from the primop down should really be changed to use an explicit given length, rather than using a null-terminated string and having to call strlen. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8309> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 5

[GHC] #8546: Panic during cabal build with profiling enabled.
by GHC 23 Feb '15

23 Feb '15

#8546: Panic during cabal build with profiling enabled. ---------------------------------+--------------------------------------- Reporter: Mokosha | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.3 Keywords: cabal sandbox | Operating System: Windows Architecture: x86 | Type of failure: Compile-time crash Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ---------------------------------+--------------------------------------- I had been recently using cabal-dev for my development work. Someone suggested I switch over to the new cabal 1.18 on #haskell. After doing so, some projects do not seem to build anymore. I'm not an experienced Haskell developer, so I'm not sure how to go about debugging such a problem. I've included the output of the install command. {{{ Pavel@ZOMBIE-POWER ~/Projects/Lambency/src $ cabal install -p Resolving dependencies... Configuring bindings-GLFW-3.0.3.1... Building bindings-GLFW-3.0.3.1... Preprocessing library bindings-GLFW-3.0.3.1... [1 of 1] Compiling Bindings.GLFW ( dist\dist-sandbox- 2b66993e\build\Bindings\GLFW.hs, dist\dist-sandbox- 2b66993e\build\Bindings\GLFW.o ) [1 of 1] Compiling Bindings.GLFW ( dist\dist-sandbox- 2b66993e\build\Bindings\GLFW.hs, dist\dist-sandbox- 2b66993e\build\Bindings\GLFW.p_o ) In-place registering bindings-GLFW-3.0.3.1... Installing library in D:\MinGW\msys\1.0\home\Pavel\Projects\Lambency\build\i386-windows- ghc-7.6.3\bindings-GLFW-3.0.3.1 Registering bindings-GLFW-3.0.3.1... Installed bindings-GLFW-3.0.3.1 Configuring GLFW-b-1.4.1... Building GLFW-b-1.4.1... Preprocessing library GLFW-b-1.4.1... [1 of 3] Compiling Graphics.UI.GLFW.Types ( Graphics\UI\GLFW\Types.hs, dist\dist-sandbox-2b66993e\build\Graphics\UI\GLFW\Types.o ) Loading package ghc-prim ... linking ... done. Loading package integer-gmp ... linking ... done. Loading package base ... linking ... done. Loading package bindings-DSL-1.0.20 ... linking ... done. Loading package bindings-GLFW-3.0.3.1 ... ghc.exe: Unknown PEi386 section name `.drectve' (while processing: D:\MinGW\msys\1.0\home\Pavel\Projects\Lambency\build\i386-windows- ghc-7.6.3\bindings-GLFW-3 .0.3.1\libHSbindings-GLFW-3.0.3.1.a) ghc.exe: panic! (the 'impossible' happened) (GHC version 7.6.3 for i386-unknown-mingw32): loadArchive "D:\\MinGW\\msys\\1.0\\home\\Pavel\\Projects\\Lambency\\build\\i386 -windows-ghc-7.6.3\\bindings-GLFW-3.0.3.1\\libHSbindings-GLFW-3.0.3.1.a": failed Please report this as a GHC bug: http://www.haskell.org/ghc/reportabug Failed to install GLFW-b-1.4.1 cabal.exe: Error: some packages failed to install: GLFW-b-1.4.1 failed during the building phase. The exception was: ExitFailure 1 }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8546> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 4

[GHC] #8362: Filesystem related tests failed on solaris (SmartOS)
by GHC 22 Feb '15

22 Feb '15

#8362: Filesystem related tests failed on solaris (SmartOS) --------------------------+------------------------------------------------ Reporter: leroux | Owner: Type: bug | Status: new Priority: high | Milestone: 7.8.1 Component: | Version: 7.6.3 libraries (other) | Operating System: Solaris Keywords: | Type of failure: Incorrect result at runtime Architecture: | Test Case: Unknown/Multiple | Blocking: Difficulty: | Unknown | Blocked By: | Related Tickets: | --------------------------+------------------------------------------------ Getting filesystem (files/permissions) related test faiures on SmartOS (32bit). {{{ $ uname -a SunOS pkgx86 5.11 joyent_20130919T215407Z i86pc i386 i86pc Solaris }}} Unexpected failures: `TEST="openFile003 getPermissions001 processGroup002 user001 posix005"` The testsuite output is attached. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8362> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 4

[GHC] #8280: Deriving Show for Word#
by GHC 21 Feb '15

21 Feb '15

#8280: Deriving Show for Word# ------------------------------------+------------------------------------- Reporter: monoidal | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- {{{ {-# LANGUAGE MagicHash #-} import GHC.Prim data A = A Word# deriving Show }}} This works in 7.6.3, but 7.7 gives {{{ Can't find interface-file declaration for data constructor GHC.Types.W# Probable cause: bug in .hi-boot file, or inconsistent .hi file Use -ddump-if-trace to get an idea of which file caused the error }}} The same file works if Word# is replaced by Int#. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8280> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 9

[GHC] #9054: runghc-<version> does not call ghc of the same version
by GHC 18 Feb '15

18 Feb '15

#9054: runghc-<version> does not call ghc of the same version ------------------------------------+------------------------------------- Reporter: EyalLotem | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.2 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- When I ran runghc-7.6.3, it actually executed "/usr/local/bin/ghc" which points to ghc-7.8.2. The offending line is inside the runghc-<version> script: {{{ exec "$executablename" -f "$bindir/ghc" ${1+"$@"} }}} Which should be: {{{ exec "$executablename" -f "$bindir/ghc-<version>" ${1+"$@"} }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9054> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 3

[GHC] #9094: remove RAW_CPP
by GHC 18 Feb '15

18 Feb '15

#9094: remove RAW_CPP ------------------------------------+------------------------------------- Reporter: carter | Owner: Type: task | Status: new Priority: normal | Milestone: 7.10.1 Component: Compiler | Version: 7.8.2 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: 8683 | Blocking: Related Tickets: #8683 | ------------------------------------+------------------------------------- once the CPP settings ticket is merged #8683 one cleanup task is to remove the RAW_CPP bits from the ghc build system because they're not longer needed -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9094> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 7

[GHC] #9135: readProcessWithExitCode leaks when the program does not exist
by GHC 17 Feb '15

17 Feb '15

#9135: readProcessWithExitCode leaks when the program does not exist -------------------------------------+------------------------------------- Reporter: luite | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: libraries/process | Version: 7.8.2 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | -------------------------------------+------------------------------------- {{{#!haskell import Control.Monad import System.Process import qualified Control.Exception as C try' :: IO a -> IO (Either C.SomeException a) try' = C.try main = replicateM_ 1000 $ do try' (readProcessWithExitCode "doesnotexist" [] "") print =<< try' (readProcessWithExitCode "/bin/echo" ["it works"] "") }}} This eventually runs out of file descriptors and fails to start the existing process. Tested with process 1.2.0.0 and GHC 7.8.2 on OS X -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9135> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 1

[GHC] #8844: Pseudo terminal and process-1.2.0.0
by GHC 17 Feb '15

17 Feb '15

#8844: Pseudo terminal and process-1.2.0.0 -------------------------------------+------------------------------------- Reporter: ksamborski | Owner: Type: feature request | Status: new Priority: normal | Milestone: Component: libraries/process | Version: 7.6.3 Keywords: pty | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | -------------------------------------+------------------------------------- Hello, I'm writing simple app which execute process and communicate with it via pseudo terminal. Here is some sample code: import System.Posix.Terminal import System.Process main = do (master, slave) <- openPseudoTerminal hslave <- fdToHandle slave hSetBuffering hslave NoBuffering (_,_,_,ph) <- createProcess (shell "mc"){ env = Just [("TERM", "xterm")] , std_in = UseHandle hslave , std_out = UseHandle hslave , std_err = UseHandle hslave , close_fds = True } forkIO $ readTerm master -- my function which reads output from process waitForProcess ph The problem is that mc still wants some input from stdin but not from slave terminal. But when I changed function runIteractiveProcess from runProcess.c like this: ... /* Reset the SIGINT/SIGQUIT signal handlers in the child, if requested */ if (reset_int_quit_handlers) { struct sigaction dfl; (void)sigemptyset(&dfl.sa_ mask); dfl.sa_flags = 0; dfl.sa_handler = SIG_DFL; (void)sigaction(SIGINT, &dfl, NULL); (void)sigaction(SIGQUIT, &dfl, NULL); } /********************************************************************************/ setsid(); //Make the current process a new session leader ioctl(0, TIOCSCTTY, 1); //As the child is a session leader, set the controlling terminal to be the slave side of the PTY /********************************************************************************/ /* the child */ if (environment) { // XXX Check result execvpe(args[0], args, environment); } else { // XXX Check result execvp(args[0], args); } childFailed(forkCommunicationFds[1], forkExecFailed); ... it worked as expected, I'm not proposing patch or solution but is there any chance to add support for pseudo terminals in the process library? Maybe just add another record field in CreateProcess like pty :: Bool and then call these two additional instructions in runIteractiveProcess? Best regards, Karol Samborski -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8844> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 2

[GHC] #9213: CPP warnings on ghcautoconf.h
by GHC 09 Feb '15

09 Feb '15

#9213: CPP warnings on ghcautoconf.h ------------------------------------+------------------------------------- Reporter: asr | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.2 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- The cpphs program yields the following warning: {{{ Warning: trailing characters after #if directive in file ... /ghcautoconf.h at line 383 col 1: AC_APPLE_UNIVERSAL_BUILD }}} I guess it is necessary to replace `#if defined` by `#ifdef` in the line {{{ #if defined AC_APPLE_UNIVERSAL_BUILD }}} from the mk/config.h.in file. Note the next line `# if defined __BIG_ENDIAN__` has the same issue. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9213> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 14