January 2015 - ghc-tickets

[GHC] #9748: Disambiguate IO actions in GHCi with :set +t
by GHC 06 Jan '17

06 Jan '17

#9748: Disambiguate IO actions in GHCi with :set +t -------------------------------------+------------------------------------- Reporter: Iceland_jack | Owner: Type: feature request | Status: new Priority: low | Milestone: Component: GHCi | Version: 7.8.2 Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Easy (less than 1 | Type of failure: hour) | None/Unknown Blocked By: | Test Case: Related Tickets: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- Currently GHCi's `:set +t` displays the same type for the following: {{{#!hs % ghci -ignore-dot-ghci GHCi, version 7.8.2: http://www.haskell.org/ghc/ :? for help Loading package ghc-prim ... linking ... done. Loading package integer-gmp ... linking ... done. Loading package base ... linking ... done. Prelude> :set +t Prelude> 'a' 'a' it :: Char Prelude> return 'a' 'a' it :: Char Prelude> return 'a' :: IO Char 'a' it :: Char }}} A user at `#haskell-beginners` ran into a problem where they mistook an expression that defaulted to IO for a pure expression (`Id . even <$> pure 5`), `:set +t` was suggested but ended up showing the incorrect type: {{{#!hs ghci> Id . even <$> pure 5 Id False it :: Id Bool }}} This is bad for pedagogical reasons, it would be an improvement to display the following: {{{#!hs Prelude> :set +t Prelude> 'a' 'a' it :: Char Prelude> return 'a' 'a' it :: Char <- return 'a' :: IO Char Prelude> return 'a' :: IO Char 'a' it :: Char <- return 'a' :: IO Char }}} mirroring existing syntax: {{{#!hs Prelude> :set -XScopedTypeVariables Prelude> a :: Char <- return 'a' :: IO Char a :: Char }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9748> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 8

[GHC] #9248: Document -XHaskell98 and -XHaskell2010 in flag reference
by GHC 05 Jan '17

05 Jan '17

#9248: Document -XHaskell98 and -XHaskell2010 in flag reference ------------------------------------+------------------------------------- Reporter: goldfire | Owner: goldfire Type: bug | Status: new Priority: normal | Milestone: Component: Documentation | Version: 7.8.2 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9248> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 3

[GHC] #8107: need types to express constant argument for primop correctness
by GHC 22 Dec '16

22 Dec '16

#8107: need types to express constant argument for primop correctness ------------------------------------+------------------------------------- Reporter: carter | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- (not sure if this is a bug or a feature request, or a task, or a dialogue, filing as a bug for now) a number of compiler intrinsics that GHC has started to support (prefetch) and will come to support (concurrent memory operations a la http://ghc.haskell.org/trac/ghc/ticket/7883) require certain arguments to be statically fixed at compile time {{{ primop PrefetchAddrOp "prefetchAddr#" GenPrimOp Addr# -> Int# -> Addr# with llvm_only = True }}} consider the specification on the llvm side for prefetch http://llvm.org/docs/LangRef.html#llvm-prefetch-intrinsic {{{ Syntax:¶ declare void @llvm.prefetch(i8* <address>, i32 <rw>, i32 <locality>, i32 <cache type>) Overview: The ‘llvm.prefetch‘ intrinsic is a hint to the code generator to insert a prefetch instruction if supported; otherwise, it is a noop. Prefetches have no effect on the behavior of the program but can change its performance characteristics. Arguments: address is the address to be prefetched, rw is the specifier determining if the fetch should be for a read (0) or write (1), and locality is a temporal locality specifier ranging from (0) - no locality, to (3) - extremely local keep in cache. The cache type specifies whether the prefetch is performed on the data (1) or instruction (0) cache. The rw, locality and cache type arguments must be constant integers. }}} the punch line is that we're starting add primops that REALLY require certain arguments to be compile time constants to work correctly, otherwise there will by definition be compiler errors after the c-- phase when operations are passed along to the llvm backend and friends. (for the atomicity ops, i'll be looking into adding them to the native code gen, but the point being it will likely trigger an error at code gen time). a strawman approach would look like adding a type {{{ ReallyActuallyConstant :: * or unliftedtype -> * unliftedtype}}} roughly, then prefetch could have the type {{{ primop PrefetchAddrOp "prefetchAddr#" GenPrimOp Addr# ->ReallyActuallyConstant Int# -> Addr# with llvm_only = True }}} a way of emulating something like this functionality now, would be some template haskell that lets you lift a compile time constant of type t into the type ReallyActuallyConstant t, and is the only way to build a value of that type "ReallyActuallyConstant t". That said, that approach seems like a bad way of providing type safetype for making sure primops actually compile! Point being, some sort of way of nicely enforcing that a value needs to be available at compile time, that doesn't require doing abusing template haskell, is the idea i'm pointing at. Might also be useful for other things, but for now, i'm merely remarking on an invariant these primops have -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8107> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 11

[GHC] #9509: No automatic specialization of inlinable imports in 7.8
by GHC 21 Dec '16

21 Dec '16

#9509: No automatic specialization of inlinable imports in 7.8 -------------------------------------+------------------------------------- Reporter: dolio | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.3 Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Unknown | Type of failure: Runtime Blocked By: | performance bug Related Tickets: | Test Case: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- According to the GHC manual, any uses of an imported definition that is overloaded and INLINABLE will automatically cause a SPECIALIZE to be generated for those uses, if appropriate. However, this no longer appears to be the case in 7.8(.3). Here is a simple test case: {{{#!hs module A (foo) where import Data.IORef foo :: Ord a => a -> IO a foo x = newIORef x >>= readIORef >>= \y -> case compare x y of LT -> return x ; _ -> return y {-# INLINABLE foo #-} }}} {{{#!hs module Main (main) where import A main = foo (5 :: Int) >>= print }}} `foo` is constructed to be long enough that GHC 7.8.3 will elect to not inline it. When compiling with 7.6.3, the core contains the following: {{{ Main.$sfoo1 :: GHC.Types.Int -> GHC.Prim.State# GHC.Prim.RealWorld -> (# GHC.Prim.State# GHC.Prim.RealWorld, GHC.Types.Int #) [GblId, Arity=2, Caf=NoCafRefs, Str=DmdType LL, Unf=Unf{Src=<vanilla>, TopLvl=True, Arity=2, Value=True, ConLike=True, WorkFree=True, Expandable=True, Guidance=IF_ARGS [20 0] 55 30}] Main.$sfoo1 = \ (x_XkE :: GHC.Types.Int) (eta_B1 :: GHC.Prim.State# GHC.Prim.RealWorld) -> case GHC.Prim.newMutVar# @ GHC.Types.Int @ GHC.Prim.RealWorld x_XkE eta_B1 of _ { (# ipv_amT, ipv1_amU #) -> case GHC.Prim.readMutVar# @ GHC.Prim.RealWorld @ GHC.Types.Int ipv1_amU ipv_amT of ds1_amJ { (# ipv2_Xn8, ipv3_Xna #) -> case x_XkE of wild_axu { GHC.Types.I# x#_axw -> case ipv3_Xna of _ { GHC.Types.I# y#_axA -> case GHC.Prim.<# x#_axw y#_axA of _ { GHC.Types.False -> ds1_amJ; GHC.Types.True -> (# ipv2_Xn8, wild_axu #) } } } } } Main.$sfoo :: GHC.Types.Int -> GHC.Types.IO GHC.Types.Int [GblId, Arity=2, Caf=NoCafRefs, Str=DmdType LL, Unf=Unf{Src=<vanilla>, TopLvl=True, Arity=0, Value=True, ConLike=True, WorkFree=True, Expandable=True, Guidance=ALWAYS_IF(unsat_ok=True,boring_ok=True)}] Main.$sfoo = Main.$sfoo1 `cast` (<GHC.Types.Int> -> Sym <(GHC.Types.NTCo:IO <GHC.Types.Int>)> :: (GHC.Types.Int -> GHC.Prim.State# GHC.Prim.RealWorld -> (# GHC.Prim.State# GHC.Prim.RealWorld, GHC.Types.Int #)) ~# (GHC.Types.Int -> GHC.Types.IO GHC.Types.Int)) ... ------ Local rules for imported ids -------- "SPEC A.foo [GHC.Types.Int]" [ALWAYS] forall ($dOrd_sxj :: GHC.Classes.Ord GHC.Types.Int) A.foo @ GHC.Types.Int $dOrd_sxj = Main.$sfoo }}} However, in 7.8.3 and newer (I'm actually using 7.9.20140725 for this particular output, but 7.8.3 is similar), we see the following: {{{ Main.main1 :: GHC.Prim.State# GHC.Prim.RealWorld -> (# GHC.Prim.State# GHC.Prim.RealWorld, () #) [GblId, Arity=1, Str=DmdType <L,U>, Unf=Unf{Src=<vanilla>, TopLvl=True, Arity=1, Value=True, ConLike=True, WorkFree=True, Expandable=True, Guidance=IF_ARGS [0] 100 0}] Main.main1 = \ (s_aIb :: GHC.Prim.State# GHC.Prim.RealWorld) -> case ((A.foo @ GHC.Types.Int GHC.Classes.$fOrdInt Main.main2) `cast` (GHC.Types.NTCo:IO[0] <GHC.Types.Int>_R :: GHC.Types.IO GHC.Types.Int ~R# (GHC.Prim.State# GHC.Prim.RealWorld -> (# GHC.Prim.State# GHC.Prim.RealWorld, GHC.Types.Int #)))) s_aIb of _ [Occ=Dead] { (# ipv_aIe, ipv1_aIf #) -> GHC.IO.Handle.Text.hPutStr2 GHC.IO.Handle.FD.stdout (GHC.Show.$fShowInt_$cshow ipv1_aIf) GHC.Types.True ipv_aIe } }}} There is no local rules section in 7.8.3. Putting a manual SPECIALIZE pragma in the main module generates comparable code to 7.6.3, so it does not appear to be a failure at that level. Rather, GHC seems to just not be generating the SPECIALIZE equivalent. Presumably this is a regression, but even if not, the manual should be revised. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9509> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 7

[GHC] #10007: Fix misattribution of Cost Centre profiles to lintAnnots
by GHC 19 Dec '16

19 Dec '16

#10007: Fix misattribution of Cost Centre profiles to lintAnnots -------------------------------------+------------------------------------- Reporter: | Owner: scpmw thoughtpolice | Status: new Type: bug | Milestone: 7.10.1 Priority: high | Version: 7.10.1-rc1 Component: Profiling | Operating System: Unknown/Multiple Keywords: | Type of failure: Incorrect result Architecture: | at runtime Unknown/Multiple | Blocked By: Test Case: | Related Tickets: #9961 Blocking: | Differential Revisions: Phab:D616 | -------------------------------------+------------------------------------- Split off from #9961 - the profiling results while debugging erroneously reported that most cost centre profiles were a result of `lintAnnots`, as opposed to `CSE`. This is a bug. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10007> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 21

[GHC] #9601: Make the rewrite rule system more powerful
by GHC 16 Dec '16

16 Dec '16

#9601: Make the rewrite rule system more powerful -------------------------------------+------------------------------------- Reporter: spacekitteh | Owner: Type: feature request | Status: new Priority: normal | Milestone: 7.10.1 Component: Compiler | Version: 7.8.2 Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Project (more | Type of failure: than a week) | None/Unknown Blocked By: | Test Case: Related Tickets: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- It would be amazing if the current RULES system could be upgraded to include various predicates, or even into a full-on strategic programming system. This would allow far far more optimisations to be possible, rather than the current conservative system where you have to make sure that the optimisations ALWAYS apply. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9601> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 6

[GHC] #8299: Add richer data model address arithmetic: AddrDiff and AddrInt (ie d Int_ptr_diff and Int_ptr_size)
by GHC 16 Dec '16

16 Dec '16

#8299: Add richer data model address arithmetic: AddrDiff and AddrInt (ie d Int_ptr_diff and Int_ptr_size) ----------------------------------------------+---------------------------- Reporter: carter | Owner: Type: feature request | Status: new Priority: high | Milestone: 7.10.1 Component: Compiler | Version: 7.6.3 Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Project (more than a week) | Type of failure: Blocked By: | None/Unknown Related Tickets: | Test Case: | Blocking: 8287 ----------------------------------------------+---------------------------- currently GHC's internals and code gen don't provide a strong distinction between Ints as data, and Ints for pointer / address arithmetic. This also comes up as being problematical in a number of ways. 1. We wind up having many portability issues around Int and pointer / address sizes. 2. adds some inessential complexity / problems to adding new architectures to ghc. eg x32 ABI which has 32bit pointers and 64bit ints somewhat breaks current assumptions in the GHC primops (because arrays are indexed by a byte offset, and the valid range for those is determined by the ABI pointer size!) 3. this Ints and Ptrs confusion we currently have, also means we can't leverage the Integer support in SIMD registers that is in most modern CPUs! If we could have those two separated better, theres a lot of low leve optimizations we could do for Int/Word data that we currently cant do! -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8299> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 8

[GHC] #9890: RTS -qa option is helpful but under-documented
by GHC 15 Dec '16

15 Dec '16

#9890: RTS -qa option is helpful but under-documented -------------------------------------+------------------------------------- Reporter: adamgundry | Owner: Type: task | Status: new Priority: normal | Milestone: Component: Runtime System | Version: 7.8.3 Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Unknown | Type of failure: Blocked By: | Documentation bug Related Tickets: | Test Case: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- The entire documentation for the RTS `-qa` option is Use the OS's affinity facilities to try to pin OS threads to CPU cores. This is an experimental feature, and may or may not be useful. Please let us know whether it helps for you! It does help for us: enabling it on a multithreaded, moderately GC-heavy web server led to a sizeable improvement (~20%) in throughput benchmarks. However, it would be nice if the GHC documentation was a little more descriptive about what exactly this option does and how experimental it is now considered! (Relatedly, perhaps it would be worth adding a single index of RTS options in the user's guide, much like the flag reference for GHC itself.) -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9890> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 7

[GHC] #9696: readRawBufferPtr and writeRawBufferPtr allocate memory
by GHC 13 Dec '16

13 Dec '16

#9696: readRawBufferPtr and writeRawBufferPtr allocate memory -------------------------------------+------------------------------------- Reporter: mergeconflict | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.3 Keywords: | Operating System: Architecture: x86_64 (amd64) | Unknown/Multiple Difficulty: Unknown | Type of failure: Runtime Blocked By: | performance bug Related Tickets: | Test Case: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- I initially filed this as a [http://stackoverflow.com/questions/26333815 /why-do-hgetbuf-hputbuf-etc-allocate-memory question on StackOverflow], assuming that the behavior I'm seeing was intentional, or that I was misinterpreting the profiler results... but Kazu Yamamoto [https://twitter.com/kazu_yamamoto/status/522583112249663488 suggested] I should file this as an issue here. It's my first GHC ticket, so here goes: {{{#!hs main :: IO () main = do buf <- mallocArray 1 echo buf echo :: Ptr Word8 -> IO () echo buf = forever $ do len <- readRawBufferPtr "read" stdin buf 0 1 writeRawBufferPtr "write" stdout buf 0 (fromIntegral len) }}} I expect the only heap allocation here should be my explicit `mallocArray`, but profiling with `+RTS -P` indicates this isn't the case: both the read and write operations do appear to allocate some short-lived heap objects. In contrast: {{{#!hs echo :: Ptr Word8 -> IO () echo buf = forever $ do threadWaitRead $ Fd 0 len <- c_read 0 buf 1 c_write 1 buf (fromIntegral len) yield }}} does not appear to allocate. I did a bit of digging (copying bits of source code from `base` into my own project, to get cost center annotations) and it seems like the allocation might be happening in `throwErrnoIfRetryMayBlock`. See [https://gist.github.com/anonymous/3ba3cfa118e1d05870d4 this gist] for more detail, including core output from `-ddump-simpl`. In all honesty, I don't know whether this is a bug. I was just surprised by it, when I first encountered it using `hGetBuf` / `hPutBuf`, so I'm trying to understand whether this is expected behavior and why. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9696> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 11

[GHC] #8248: GHCi should not warn if group writable
by GHC 13 Dec '16

13 Dec '16

#8248: GHCi should not warn if group writable ----------------------------+---------------------------------------------- Reporter: afcowie | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: GHCi | Version: 7.6.3 Keywords: | Operating System: Linux Architecture: | Type of failure: GHC rejects valid program Unknown/Multiple | Test Case: Difficulty: Unknown | Blocking: Blocked By: | Related Tickets: | ----------------------------+---------------------------------------------- Any number of Linux distros support the idea of user groups, whereby when a new user is created there is also simultaneously a group created with the same name; ie, instead of {{{ -rw-r--r--. 1 andrew users 19 Sep 5 08:29 ghci.conf }}} as us old traditionalists would have it, you get {{{ -rw-rw-r--. 1 andrew andrew 19 Sep 5 08:29 ghci.conf }}} because the umask in such cases is 0002 instead of 0022. There is entirely nothing unusual or incorrect about this approach, and it is followed, for example, in the Fedora family of distros. GHC, however, is being a bit silly in emitting the following: {{{ $ ghci GHCi, version 7.6.3: http://www.haskell.org/ghc/ :? for help Loading package ghc-prim ... linking ... done. Loading package integer-gmp ... linking ... done. Loading package base ... linking ... done. *** WARNING: /home/andrew/.ghc/ghci.conf is writable by someone else, IGNORING! Prelude> }}} Foremost the fact that the file is group writable is not a problem and the user's choice, //particularly// in this case because it's group writable in the user's group! Regardless of that, GHCi should not be ignoring files with other than 0644 permissions; this isn't `.ssh/`. Can this check and attendant behaviour be removed? AfC -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8248> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 15