May 2015 - ghc-tickets

[GHC] #8697: Type rationals
by GHC 16 Jun '17

16 Jun '17

#8697: Type rationals ------------------------------------+------------------------------------- Reporter: MikeIzbicki | Owner: Type: feature request | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- I've used GHC's Type Nats to implement my own type level rationals (code below). This works fine, but the syntax is a little funky because you have to write out the number as a fraction. For example, you must write 13/10 instead of 1.3; or even worse, 13/1 instead of 13. It would be nice to just write the decimal notation. I only see one potential problem with this feature: the dot in the decimal notation could interfere with the dot in forall statements. I guess this can be parsed unambiguously, but maybe not. {{{ data Frac = Frac Nat Nat data instance Sing (n::Frac) = SFrac Integer Integer instance (SingI a, SingI b) => SingI ('Frac a b) where sing = SFrac (fromSing (sing :: Sing a)) (fromSing (sing :: Sing b)) instance Fractional r => SingE (Kind :: Frac) r where fromSing (SFrac a b) = fromIntegral a/fromIntegral b type (/) a b = 'Frac a b }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8697> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 14

[GHC] #8703: Use guard pages rather than heap checks
by GHC 07 Jun '17

07 Jun '17

#8703: Use guard pages rather than heap checks ------------------------------------+------------------------------------- Reporter: schyler | Owner: simonmar Type: feature request | Status: new Priority: normal | Milestone: Component: Runtime System | Version: Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- By mmap'ing memory using MAP_ANONYMOUS (or /dev/zero) as PROT_NONE (Windows has an equivalent functionality with VirtualAlloc), it's possible to create a page that will fault when read or written to. It may be possible to remove the heap checks in the runtime, speeding up allocations, and instead expand the heap when a fault is raised. This is likely cheaper for large pages full of many small allocations than the cost of the heap checking branch. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8703> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 8

[GHC] #8905: Function arguments are always spilled/reloaded if scrutinee is already in WHNF
by GHC 26 May '17

26 May '17

#8905: Function arguments are always spilled/reloaded if scrutinee is already in WHNF ------------------------------+-------------------------------------------- Reporter: tibbe | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.9 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: Runtime performance bug Unknown/Multiple | Test Case: Difficulty: Unknown | Blocking: Blocked By: | Related Tickets: | ------------------------------+-------------------------------------------- The code generator unnecessarily spills and reloads function arguments if the scrutinee turns out to be already evaluated (i.e. has non-zero tag bits). Here's the beginning of a function body, taken from the `insert` function at https://github.com/tibbe/unordered- containers/blob/master/Data/HashMap/Base.hs#L303: {{{ c2wQ: // stack check if ((Sp + -72) < SpLim) goto c2wR; else goto c2wS; c2wR: // stack check failure R1 = PicBaseReg + $wpoly_go_closure; I64[Sp - 40] = R2; I64[Sp - 32] = R3; P64[Sp - 24] = R4; I64[Sp - 16] = R5; P64[Sp - 8] = R6; Sp = Sp - 40; call (I64[BaseReg - 8])(R1) args: 48, res: 0, upd: 8; c2wS: // stack check success I64[Sp - 40] = PicBaseReg + block_c2my_info; // return addr for eval R1 = R6; // t I64[Sp - 32] = R2; // spill: s I64[Sp - 24] = R3; // spill: x P64[Sp - 16] = R4; // spill: k I64[Sp - 8] = R5; // spill: h Sp = Sp - 40; if (R1 & 7 != 0) goto c2my; else goto c2mz; // eval check of t c2mz: // eval check failed call (I64[R1])(R1) returns to c2my, args: 8, res: 8, upd: 8; // eval c2my: // eval check succeeded _s2b1::I64 = I64[Sp + 8]; // reload: h _s2b2::I64 = I64[Sp + 16]; // reload: k _s2b3::P64 = P64[Sp + 24]; // reload: x _s2b4::I64 = I64[Sp + 32]; // reload: s switch [0 .. 4] (R1 & 7 - 1) { case 0 : goto c2wK; case 1 : goto c2wL; case 2 : goto c2wM; case 3 : goto c2wN; case 4 : goto c2wO; } }}} It seems to me that all the spills/reloads could be pushed into the `c2mz` block. The `c2my` block, in its current form, is reused for a heap check failure case, so the heap check most likely will have to do its own spilling/reloading. However, since the scrutinee not having tags bit or the eval checking failing is not the common case, they should be out of the common path. If it matters the data type is spine strict so GHC should have enough information to know that the common case (e.g. self-recursive calls) already have an evaluated argument (although there might be an indirection in some cases). -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8905> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 17

[GHC] #10421: exponential blowup in inlining (without INLINE pragmas)
by GHC 26 May '17

26 May '17

#10421: exponential blowup in inlining (without INLINE pragmas) -------------------------------------+------------------------------------- Reporter: rwbarton | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Blocked By: Test Case: | Related Tickets: Blocking: | Differential Revisions: | -------------------------------------+------------------------------------- The test case for #10397 also demonstrates an exponential blowup by the inliner, without any INLINE pragmas. I added another four fields to the `Register` type, and I get these final Core program sizes. (The variation in sizes between versions is not really important, the point is just that they are very large for all versions.) {{{ ghc-7.6.3: *** CorePrep: Result size of CorePrep = {terms: 1,702,684, types: 1,950,647, coercions: 103} ghc-7.8.4: *** CorePrep: Result size of CorePrep = {terms: 1,964,183, types: 1,950,620, coercions: 97} ghc-7.10.1: *** CorePrep: Result size of CorePrep = {terms: 1,964,212, types: 1,950,764, coercions: 97} ghc-7.11: *** CorePrep: Result size of CorePrep = {terms: 1,964,212, types: 1,950,764, coercions: 97} }}} Ideally GHC should not produce enormous Core programs on its own like this. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10421> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 6

[GHC] #9287: changed dependency generation
by GHC 23 May '17

23 May '17

#9287: changed dependency generation ------------------------------------+-------------------------------------- Reporter: maeder | Owner: Type: task | Status: new Priority: normal | Milestone: Component: Documentation | Version: 7.8.2 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: Documentation bug Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+-------------------------------------- "ghc -M" for ghc-7.8.x changed in that an error occurs: {{{ You must specify at least one -dep-suffix }}} By chance (#8746) I found that {{{ ghc -M -dep-suffix "" B.hs }}} works, but only for the new ghc-7.8.x. For module B importing module A the following dependencies are generated: {{{ # DO NOT DELETE: Beginning of Haskell dependencies A.o : A.hs B.o : B.hs B.o : A.hi # DO NOT DELETE: End of Haskell dependencies }}} The same command used with ghc-7.6.x produces wrong dependencies: {{{ # DO NOT DELETE: Beginning of Haskell dependencies A.o A._o : A.hs B.o B._o : B.hs B.o : A.hi B._o : A._hi # DO NOT DELETE: End of Haskell dependencies }}} Obviously, only for dynamic linking a dep-suffix should be needed. However for ghc-7.6. this must be "dyn" and for ghc-7.8.x this must "dyn_" plus the empty suffix! {{{ ghc-7.6.3 -M -dep-suffix dyn B.hs ghc-7.8.2 -M -dep-suffix dyn_ -dep-suffix "" B.hs }}} Both calls produce: {{{ # DO NOT DELETE: Beginning of Haskell dependencies A.o A.dyn_o : A.hs B.o B.dyn_o : B.hs B.o : A.hi B.dyn_o : A.dyn_hi # DO NOT DELETE: End of Haskell dependencies }}} The changed behavior is not documented in http://www.haskell.org/ghc/docs/7.8.2/html/users_guide/separate- compilation.html#makefile-dependencies The (accidental?) change should also be documented in the release notes! -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9287> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 9

[GHC] #9445: GHC Panic: Tick Exhausted with high factor
by GHC 22 May '17

22 May '17

#9445: GHC Panic: Tick Exhausted with high factor -------------------------------------+------------------------------------- Reporter: adinapoli | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.3 Keywords: panic | Operating System: MacOS X Architecture: Unknown/Multiple | Type of failure: Difficulty: Unknown | None/Unknown Blocked By: | Test Case: Related Tickets: 5539 | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- Hello guys, this is an old bug which has been reported so many times that I'm not sure this will be noise or something useful. In a nutshell I have been hit by this bug installing the library "SFML", which relies heavily on FFI. The only interesting thing of this report is that it was necessary an very high simpl-factor to make the installation go through! Pre-bump: {{{ Resolving dependencies... In order, the following will be installed: SFML-0.2.0.0 (reinstall) Warning: Note that reinstalls are always dangerous. Continuing anyway... Configuring SFML-0.2.0.0... Building SFML-0.2.0.0... Preprocessing library SFML-0.2.0.0... [...] [34 of 71] Compiling SFML.Graphics.Transform ( dist/build/SFML/Graphics/Transform.hs, dist/build/SFML/Graphics/Transform.o ) ghc: panic! (the 'impossible' happened) (GHC version 7.8.3 for x86_64-apple-darwin): Simplifier ticks exhausted When trying UnfoldingDone $j_sZQW{v} [lid] To increase the limit, use -fsimpl-tick-factor=N (default 100) If you need to do this, let GHC HQ know, and what factor you needed To see detailed counts use -ddump-simpl-stats Total ticks: 2655928 }}} And this was the magic line: {{{ cabal install SFML --ghc-option=-fsimpl-tick-factor=1630 }}} HTH, it turns out it's quite an annoying one! And yes, "1630" was the smaller factor which made the installation possible. Alfredo -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9445> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 8

[GHC] #9700: Support C structures in Haskell FFI
by GHC 22 May '17

22 May '17

#9700: Support C structures in Haskell FFI -------------------------------------+------------------------------------- Reporter: Yuras | Owner: Type: feature request | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.3 Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Unknown | Type of failure: Blocked By: | None/Unknown Related Tickets: | Test Case: | Blocking: | Differential Revisions: Phab:D252 -------------------------------------+------------------------------------- This ticket is for tracking progress on [[CStructures]] language extension proposal. The idea is to support C structures in Haskell FFI. See wiki for details. If it will be accepted, I'm going to implement it in few steps. The first one is to support structures as return value. Platform specific part for that is already implemented, see Phab:D252 -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9700> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 6

[GHC] #8048: Register spilling produces ineffecient/highly contending code
by GHC 21 May '17

21 May '17

#8048: Register spilling produces ineffecient/highly contending code -------------------------------------+------------------------------------- Reporter: schyler | Owner: Type: bug | Status: new Priority: normal | Milestone: _|_ Component: Compiler | Version: 7.6.3 Keywords: register | Operating System: Unknown/Multiple allocator spill | Type of failure: Runtime Architecture: Unknown/Multiple | performance bug Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | -------------------------------------+------------------------------------- The native codegen and llvm both produce ineffecient code for functions using structures with many strict fields or unboxed values. Consider the following program: {{{ {-# LANGUAGE BangPatterns #-} module Spill where import GHC.Exts data S = S !Int !Int !Int !Int !Int !Int !Int !Int !Int spill :: S -> S -> S -> S spill (S !a !b !c !d !e !f !g !h !i) (S !j !k !l !m !n !o !p !q !r) (S !s !t !u !v !w !x !y !z _) = S (a + j + s) (b + c) (k + r) (a + b + c + d + e + f + g + h + i) (j + k + l + m + n + o + p + q + r) (s + t + u + v + w + x + y + z) (a + b + c) (j + k + l) (s + t + u) }}} Parts of the code produced for this (which is identical regardless of -funbox-strict-fields) looks like: {{{ _cnc: addq $80,%r12 cmpq 144(%r13),%r12 ja _cni movq $Spill.S_con_info,-72(%r12) movq 32(%rbp),%rax movq %rax,-64(%r12) movq 24(%rbp),%rax movq %rax,-56(%r12) movq 16(%rbp),%rax movq %rax,-48(%r12) movq 8(%rbp),%rax movq %rax,-40(%r12) movq 40(%rbp),%rax movq %rax,-32(%r12) movq 48(%rbp),%rax movq %rax,-24(%r12) movq 56(%rbp),%rax movq %rax,-16(%r12) movq 64(%rbp),%rax movq %rax,-8(%r12) movq 7(%rbx),%rax movq %rax,0(%r12) leaq -71(%r12),%rbx addq $72,%rbp jmp *0(%rbp) }}} {{{ _csv: movq 63(%rbx),%rax movq %rax,-56(%rbp) movq 55(%rbx),%rax movq %rax,-48(%rbp) movq 47(%rbx),%rax movq %rax,-40(%rbp) movq 39(%rbx),%rax movq %rax,-32(%rbp) movq 31(%rbx),%rax movq %rax,-24(%rbp) movq 23(%rbx),%rax movq %rax,-16(%rbp) movq 71(%rbx),%rax movq %rax,-8(%rbp) movq 15(%rbx),%rax movq %rax,0(%rbp) }}} And likewise for LLVM: {{{ .LBB10_1: # %coZ movq 7(%rbx), %rcx movq $Spill_S_con_info, 8(%rax) movq 8(%rbp), %rdx movq %rdx, 16(%rax) movq 16(%rbp), %rdx movq %rdx, 24(%rax) movq 24(%rbp), %rdx movq %rdx, 32(%rax) movq 32(%rbp), %rdx movq %rdx, 40(%rax) movq 40(%rbp), %rdx movq %rdx, 48(%rax) movq 48(%rbp), %rdx movq %rdx, 56(%rax) movq 56(%rbp), %rdx movq %rdx, 64(%rax) movq 64(%rbp), %rdx movq %rdx, 72(%rax) movq %rcx, (%r12) movq 72(%rbp), %rax leaq 72(%rbp), %rbp leaq -71(%r12), %rbx jmpq *%rax # TAILCALL }}} Quoting from #ghc "the [register allocator] core algo is '96 vintage". Improvements are needed; * Take into consideration pipelining and handle spills less dramatically, attempting to reduce register contention * Sink memory reads in order to reduce register pressure -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8048> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 16

[GHC] #8721: Testsuite not reporting errors for DYN way on OS X
by GHC 18 May '17

18 May '17

#8721: Testsuite not reporting errors for DYN way on OS X ------------------------------------+---------------------------- Reporter: darchon | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Test Suite | Version: 7.6.3 Keywords: dynamic linking | Operating System: MacOS X Architecture: Unknown/Multiple | Type of failure: Other Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+---------------------------- Using GHC 7.6.3, on OS X 10.8.5, for the program: `main = putStrLn "Hello World"`, compiling with `ghc --make -dynamic Main.hs`, I get: {{{ ~/Documents/devel/test$ ./Main dyld: Library not loaded: /usr/local/lib/ghc-7.6.3/base-4.6.0.1/libHSbase-4.6.0.1-ghc7.6.3.dylib Referenced from: /Users/christiaan/Documents/devel/test/./Main Reason: image not found Trace/BPT trap: 5 }}} The reason for this is that: * I installed GHC in: `/opt/ghc/7.6.3` instead of the default `/usr/local`. * GHC-bundled libraries get an OS X `install_name` with a prefix of `/usr/local/` instead of `/opt/ghc/7.6.3/`, meaning that the runtime linker will be looking in the wrong place. So, I wondered why this bug never showed in the testsuite and decided to test: {{{ /opt/ghc/7.6.3/src/ghc/testsuite (ghc-7.6)$ make WAY=dyn TEST=10queens … =====> 10queens(dyn) 1834 of 3403 [0, 0, 0] cd ./programs/10queens && '/opt/ghc/7.6.3/src/ghc/inplace/bin/ghc-stage2' -fforce-recomp -dcore-lint -dcmm-lint -dno-debug-output -no-user-package- db -rtsopts -fno-ghci-history --make -o 10queens Main -O -dynamic >10queens.comp.stderr 2>&1 cd ./programs/10queens && ./10queens </dev/null >10queens.run.stdout 2>10queens.run.stderr OVERALL SUMMARY for test run started at Fri Jan 31 09:42:45 CET 2014 3403 total tests, which gave rise to 13561 test cases, of which 0 caused framework failures 13560 were skipped 1 expected passes 0 had missing libraries 0 expected failures 0 unexpected passes 0 unexpected failures }}} However, when I run the `10queens` program myself: {{{ /opt/ghc/7.6.3/src/ghc/testsuite (ghc-7.6)$ tests/programs/10queens/10queens dyld: Library not loaded: /usr/local/lib/ghc-7.6.3.20130421/base-4.6.0.1/libHSbase-4.6.0.1-ghc7.6.3.20130421.dylib Referenced from: /opt/ghc/7.6.3/src/ghc/testsuite/tests/programs/10queens/10queens Reason: image not found Trace/BPT trap: 5 }}} I get a similar error as the one reported above. Due to commit f7be53ac9dac85b83e7fe5ecede01b98a572ba48, these errors will no longer show in GHC 7.8. However, I feel that the testsuite is now giving a false sense of security in terms of dynamic linking. Obviously dynamic linking was broken in 7.6, but the testsuite did not catch it! Sadly, this behaviour can now only be verified in the 7.6 branch, and not in 7.8 or HEAD. Hopefully somebody more knowledgeable of the testsuite can comment why dynamic linking worked when an executable was run "within" the testsuite, whilst being broken when run normally. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8721> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 6

[GHC] #9450: GHC instantiates Data instances before checking hs-boot files
by GHC 11 May '17

11 May '17

#9450: GHC instantiates Data instances before checking hs-boot files -------------------------------------+------------------------------------- Reporter: alanz | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.3 Keywords: boot,deriving | Operating System: Architecture: x86_64 (amd64) | Unknown/Multiple Difficulty: Unknown | Type of failure: Compile- Blocked By: | time crash Related Tickets: | Test Case: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- When compiling a file with deriving instances in it and making use of boot files, it appears that the derivation is attempted before the boot files are checked for consistency. This can lead to GHC panics, as when compiling GHC after this commit https://github.com/alanz/ghc/commit/c73182ca7345f0debba47d0b17a907bcac27c41f In the attached files, if you try to load HsLit.lhs into ghci it will complain about the missing Data instance, not about the boot file inconsistency. If you remove the Data from the deriving clause of HsOverLit, it complains about the boot file inconsistency. I have not managed to reproduce the original panic in this stripped down environment, but if it is needed to more fully understand the problem I can try again to do that. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9450> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 8