May 2015 - ghc-tickets

[GHC] #9136: Constant folding in Core could be better
by GHC 02 Oct '18

02 Oct '18

#9136: Constant folding in Core could be better ------------------------------+-------------------------------------------- Reporter: simonpj | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.2 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: Runtime performance bug Unknown/Multiple | Test Case: Difficulty: Unknown | Blocking: Blocked By: | Related Tickets: | ------------------------------+-------------------------------------------- Constant folding in Core is still a bit feeble. For example, when staring at the code for `nofib/shootout/k-nucleotide` I saw this expression: {{{ (x +# 8) -# 1 }}} which would be relatively easy to optimise. The difficulty is knowing where to stop. What about `(8 +# x) -# 1`? Anyway, this ticket is to record the issue. Currently constant folding is done by the built-in RULES in `compiler/prelude/PrelRules`. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9136> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 31

[GHC] #8226: Remove the old style -- # Haddock comments.
by GHC 01 Oct '18

01 Oct '18

#8226: Remove the old style -- # Haddock comments. ------------------------------------+------------------------------------- Reporter: Fuuzetsu | Owner: Type: task | Status: new Priority: normal | Milestone: 7.8.1 Component: Compiler | Version: 7.7 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- Haddock 0.x supported -- # style comments for Haddock pragma and while this seems to have been long forgotten and not documented, it's still kicking in the lexer. I think this is a good time to get rid of these all together. Relevant Haddock ticket http://trac.haskell.org/haddock/ticket/171 I'll hopefully send in patches removing these from the lexer/parser tomorrow, if all goes well (unless anyone feels eager to do it, then please, you're most welcome to do so!). -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8226> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 11

[GHC] #8400: Migrate the RTS to use libuv (or libev, or libevent)
by GHC 29 Sep '18

29 Sep '18

#8400: Migrate the RTS to use libuv (or libev, or libevent) ----------------------------------------------+---------------------------- Reporter: schyler | Owner: Type: feature request | simonmar Priority: normal | Status: new Component: Runtime System | Milestone: Keywords: | Version: Architecture: Unknown/Multiple | Operating System: Difficulty: Project (more than a week) | Unknown/Multiple Blocked By: | Type of failure: Related Tickets: 635, 7353 | None/Unknown | Test Case: | Blocking: ----------------------------------------------+---------------------------- This is mainly a reference discussion ticket. libuv (https://github.com/joyent/libuv) is a lightweight library which allows asynchronous IO across OpenBSD, Linux, Darwin, Windows etc by utilizing the fastest implementation on each system (epoll, kqueue, IOCP, event ports). These specialized IO polling methods are '''much''' faster on their respective platforms than just using select() like the RTS currently does. Additionally, it also provides cross platform threads, mutex, condition vars, terminal input/output and term settings w/ cross platform ANSI escape code handling, thread pools, cross platform HRC's etc. It's currently significantly faster than libevent and slightly faster than libev (and no doubt faster than rolling our own stuff). Because it's maintained and utilized heavily by Node.js it's in extremely active and maintained development. Rewriting a portion of the RTS to utilize libuv would have the following benefits; * We could ditch basically all of our platform specific code. Everything under rts/win32 and rts/posix, except the SEH stuff, could be deleted. * libuv is tuned for speed on each platform. This would be an optimization to all our async IO stuff. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8400> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 29

[GHC] #8809: Prettier error messages?
by GHC 26 Sep '18

26 Sep '18

#8809: Prettier error messages? ------------------------------------+------------------------------------- Reporter: joelteon | Owner: Type: feature request | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.9 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- `clang` has very nice-looking error messages. {{{ #!html <pre>pretty.c:6:7: warning: incompatible pointer to integer conversion passing 'char [14]' to parameter of type 'int' [-Wint-conversion] foo("Hello, world!"); ^~~~~~~~~~~~~~~ pretty.c:1:14: note: passing argument to parameter 'i' here void foo(int i) { ^ 1 warning generated.</pre> }}} `ghc`'s error messages are not so good. {{{ #!html <pre>ugly.hs:7:18: Couldn't match expected type ‘()’ with actual type ‘[Char]’ In the first argument of ‘f’, namely ‘"Hello, world!"’ In the second argument of ‘($)’, namely ‘f "Hello, world!"’ In the expression: print $ f "Hello, world!"</pre> }}} In my opinion, there are three independent improvements that could be made to GHC error messages and warnings: color, context and whitespace. Currently they're blobs of text. Consider all three applied to error messages: {{{ #!html <pre>ugly.hs:7:18: error: Argument to 'f' is type '[Char]' but expected 'Int' main = print $ f "Hello, world!" ^~~~~~~~~~~~~~~ ugly.hs:3:1: note: type of 'f' is given here: f :: () -> IO () ^~</pre> }}} or {{{ #!html <pre>ugly.hs: note: type of 'f' is inferred: f :: forall m. Monad m => () -> m () ^~</pre> }}} In my opinion, context and whitespace are more important that color. Even without color, compare this error message to the one shown above: {{{ ugly.hs:7:18: error: Argument to 'f' is type '[Char]' but expected 'Int' main = print $ f "Hello, world!" ^~~~~~~~~~~~~~~ ugly.hs:3:1: note: type of 'f' is given here: f :: () -> IO () ^~ }}} In my opinion this is much easier to visually process than GHC's current messages. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8809> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 79

[GHC] #8578: Improvements to SpinLock implementation
by GHC 24 Sep '18

24 Sep '18

#8578: Improvements to SpinLock implementation ------------------------------------+------------------------------------- Reporter: parcs | Owner: parcs Type: task | Status: new Priority: normal | Milestone: Component: Runtime System | Version: 7.7 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- The SpinLock implementation has a number of deficiencies. Here is a pair of patches that improves its implementation. Let me know what you think. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8578> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 11

[GHC] #10193: TypeRep Show instance doesn't add parens around type operators
by GHC 24 Sep '18

24 Sep '18

#10193: TypeRep Show instance doesn't add parens around type operators -------------------------------------+------------------------------------- Reporter: | Owner: pawel.nowak | Status: new Type: bug | Milestone: Priority: normal | Version: 7.10.1-rc3 Component: | Operating System: Unknown/Multiple libraries/base | Type of failure: Incorrect result Keywords: | at runtime Architecture: | Blocked By: Unknown/Multiple | Related Tickets: Test Case: | Blocking: | Differential Revisions: | -------------------------------------+------------------------------------- The following code {{{#!hs {-# LANGUAGE AutoDeriveTypeable #-} {-# LANGUAGE TypeOperators #-} import Data.Typeable data a :*: b = Pair a b main = print (typeOf (Pair 'a' 'b')) }}} prints {{{#!hs :*: Char Char }}} which is not valid Haskell. I belive it should print {{{#!hs (:*:) Char Char }}} In my particular case I am using Hint to interpret a type involving type operators. Hint uses showed TypeRep as a type annotation: {{{#!hs let type_str = show $ Data.Typeable.typeOf wit ... let expr_typesig = concat [parens e, " :: ", type_str] }}} What results in a parse error. I can write a patch if someone confirms that's the desired behavior and doesn't break anything. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10193> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 4

[GHC] #8281: The impossible happened: primRepToFFIType
by GHC 21 Sep '18

21 Sep '18

#8281: The impossible happened: primRepToFFIType -----------------------------------+--------------------------------------- Reporter: tibbe | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.2 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: Compile-time crash Unknown/Multiple | Test Case: Difficulty: Unknown | Blocking: Blocked By: | Related Tickets: | -----------------------------------+--------------------------------------- I ran into this error while trying to use GHCi on the hashable package: {{{ $ cabal repl Preprocessing library hashable-1.2.0.10... GHCi, version 7.6.2: http://www.haskell.org/ghc/ :? for help Loading package ghc-prim ... linking ... done. Loading package integer-gmp ... linking ... done. Loading package base ... linking ... done. Loading package array-0.4.0.1 ... linking ... done. Loading package deepseq-1.3.0.1 ... linking ... done. Loading package bytestring-0.10.0.2 ... linking ... done. Loading package text-0.11.3.1 ... linking ... done. Loading object (static) dist/build/cbits/fnv.o ... done Loading object (static) dist/build/cbits/getRandomBytes.o ... done final link ... done [1 of 4] Compiling Data.Hashable.RandomSource ( Data/Hashable/RandomSource.hs, interpreted ) [flags changed] [2 of 4] Compiling Data.Hashable.Class ( Data/Hashable/Class.hs, interpreted ) [flags changed] ghc: panic! (the 'impossible' happened) (GHC version 7.6.2 for x86_64-apple-darwin): primRepToFFIType Please report this as a GHC bug: http://www.haskell.org/ghc/reportabug }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8281> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 37

[GHC] #9622: GHCi command to solve a constraint
by GHC 06 Sep '18

06 Sep '18

#9622: GHCi command to solve a constraint -------------------------------------+------------------------------------- Reporter: monoidal | Owner: Type: feature request | Status: new Priority: normal | Milestone: Component: Compiler (Type | Version: 7.8.3 checker) | Operating System: Keywords: | Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: Difficulty: Unknown | None/Unknown Blocked By: | Test Case: Related Tickets: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- It would be nice to have a `:solve` command for ghci that took a class constraint and returned either its derivation or an error message. A possible interface could look like so: {{{ ghci> :solve Eq (Maybe Type1, Bool) 1) instance Eq Type1 -- Defined in ‘MyModule’ 2) instance Eq a => Eq (Maybe a) -- Defined in ‘GHC.Classes’ 3) instance Eq (Maybe Type1) -- Put a ~ Int in 2) and use 1) 4) instance Eq Bool -- Defined in ‘GHC.Classes’ 5) instance (Eq a, Eq b) => Eq (a,b) -- Defined in ‘GHC.Classes’ 6) instance Eq (Maybe Type1, Bool) -- Put a ~ Maybe Type1, b ~ Bool in 5) and use 3), 4) ghci> :solve Eq (Int -> Int) No instance for Eq (Int -> Int) }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9622> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 2

[GHC] #10249: Suboptimal error message with deferred type errors
by GHC 05 Sep '18

05 Sep '18

#10249: Suboptimal error message with deferred type errors -------------------------------------+------------------------------------- Reporter: | Owner: Iceland_jack | Status: new Type: feature | Milestone: request | Version: 7.10.1 Priority: normal | Operating System: Unknown/Multiple Component: GHCi | Type of failure: None/Unknown Keywords: | Blocked By: Architecture: | Related Tickets: Unknown/Multiple | Test Case: | Blocking: | Differential Revisions: | -------------------------------------+------------------------------------- {{{#!hs $ ghci -fdefer-type-errors -ignore-dot-ghci GHCi, version 7.10.0.20150316: http://www.haskell.org/ghc/ :? for help Prelude> _ <interactive>:2:1: Warning: Found hole ‘_’ with type: IO t0 Where: ‘t0’ is an ambiguous type variable In the first argument of ‘GHC.GHCi.ghciStepIO :: IO a_aly -> IO a_aly’, namely ‘_’ In a stmt of an interactive GHCi command: it <- GHC.GHCi.ghciStepIO :: IO a_aly -> IO a_aly _ *** Exception: <interactive>:2:1: Found hole ‘_’ with type: IO t0 Where: ‘t0’ is an ambiguous type variable In the first argument of ‘GHC.GHCi.ghciStepIO :: IO a_aly -> IO a_aly’, namely ‘_’ In a stmt of an interactive GHCi command: it <- GHC.GHCi.ghciStepIO :: IO a_aly -> IO a_aly _ (deferred type error) Prelude> }}} It should ideally not expose `ghciStepIO` to the user. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10249> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 11

[GHC] #8414: ghc-pkg prevents dynamic library only packages
by GHC 04 Sep '18

04 Sep '18

#8414: ghc-pkg prevents dynamic library only packages ------------------------------------+------------------------------------- Reporter: AndreasVoellmy | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: ghc-pkg | Version: Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: Other Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- GHC supports compiling Haskell libraries as dynamic libraries and building executables against dynamic libraries. GHCi seems to support loading modules from dynamic libraries, too. So it would seem that it should be possible to have packages that only include dynamic libraries, omitting the .a and .o files typically generated. cabal-install allows building dynamic libraries only, for example with the command "cabal install --disable-library-vanilla --enable-shared --disable-library-profiling". However, ghc-pkg register refuses to install the package without the .a files present. This seems to be a bug with ghc-pkg. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8414> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 6