November 2016 - ghc-tickets

[GHC] #12848: Reduce long-term memory usage of GHCi
by GHC 25 Sep '18

25 Sep '18

#12848: Reduce long-term memory usage of GHCi ---------------------------------------+-------------------------- Reporter: arybczak | Owner: Type: feature request | Status: new Priority: normal | Milestone: Component: GHCi | Version: 8.0.1 Keywords: | Operating System: Linux Architecture: x86_64 (amd64) | Type of failure: Other Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: ---------------------------------------+-------------------------- If you take moderately sized Haskell project (let's use lens as an example) and decide to work with it using `cabal repl`, memory usage of GHCi becomes a bit problematic after a few code reloads. I compared 7.10.3 and 8.0.1 using the following steps: 1. Start GHCi with `cabal repl`. 2. Wait for all modules to load, check memory usage with `htop`. 3. Issue `find . -name '*.hs' -exec touch {} +` in src directory. 4. Issue `:r` in GHCi so it reloads all modules. 5. Repeat (3) and (4) four more times. Results: '''GHC 7.10.3''' * After `cabal repl`: 874MB * After reloading all modules (1st): 1304MB * After reloading all modules (2nd): 1763MB * After reloading all modules (3rd): 2216MB * After reloading all modules (4th): 2672MB * After reloading all modules (5th): 3121MB Basically, every time modules are reloaded memory usage increases by ~450MB, which is definitely not fun. '''GHC 8.0.1''' * After `cabal repl`: 1322MB * After reloading all modules (1st): 2144MB * After reloading all modules (2nd): 2201MB * After reloading all modules (3rd): 2208MB * After reloading all modules (4th): 2212MB * After reloading all modules (5th): 2213MB Here the initial memory usage is much higher as with 7.10.3 and there is a sharp increase after first full reload, but then it more or less plateaus. I presume this change is the result of 6ae616f5be1db6da8bc0c5e36736a76cfea46844 - upfront memory usage is probably higher due to more things being forced (and the fact that memory usage doesn't increase indefinitely is great). However, I'm still concerned about the spike after the first reload - would it be possible to get rid of (or at least decrease) it? -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/12848> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 4

[GHC] #8578: Improvements to SpinLock implementation
by GHC 25 Sep '18

25 Sep '18

#8578: Improvements to SpinLock implementation ------------------------------------+------------------------------------- Reporter: parcs | Owner: parcs Type: task | Status: new Priority: normal | Milestone: Component: Runtime System | Version: 7.7 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- The SpinLock implementation has a number of deficiencies. Here is a pair of patches that improves its implementation. Let me know what you think. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8578> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 11

[GHC] #10193: TypeRep Show instance doesn't add parens around type operators
by GHC 24 Sep '18

24 Sep '18

#10193: TypeRep Show instance doesn't add parens around type operators -------------------------------------+------------------------------------- Reporter: | Owner: pawel.nowak | Status: new Type: bug | Milestone: Priority: normal | Version: 7.10.1-rc3 Component: | Operating System: Unknown/Multiple libraries/base | Type of failure: Incorrect result Keywords: | at runtime Architecture: | Blocked By: Unknown/Multiple | Related Tickets: Test Case: | Blocking: | Differential Revisions: | -------------------------------------+------------------------------------- The following code {{{#!hs {-# LANGUAGE AutoDeriveTypeable #-} {-# LANGUAGE TypeOperators #-} import Data.Typeable data a :*: b = Pair a b main = print (typeOf (Pair 'a' 'b')) }}} prints {{{#!hs :*: Char Char }}} which is not valid Haskell. I belive it should print {{{#!hs (:*:) Char Char }}} In my particular case I am using Hint to interpret a type involving type operators. Hint uses showed TypeRep as a type annotation: {{{#!hs let type_str = show $ Data.Typeable.typeOf wit ... let expr_typesig = concat [parens e, " :: ", type_str] }}} What results in a parse error. I can write a patch if someone confirms that's the desired behavior and doesn't break anything. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10193> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 4

[GHC] #11155: Trivial error thunk gives "undefined reference to stg_ap_0_upd_info"
by GHC 23 Sep '18

23 Sep '18

#11155: Trivial error thunk gives "undefined reference to stg_ap_0_upd_info" -------------------------------------+------------------------------------- Reporter: simonpj | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.10.2 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- This error popped up when Alan was coding the solution for #11028. The error is utterly unrelated to what Alan was working on. Here's a reproducer {{{ {-# OPTIONS_GHC -O -fno-full-laziness #-} module Main where foo :: Bool {-# NOINLINE foo #-} foo = error "rk" bar x = let t :: Char t = case foo of { True -> 'v'; False -> 'y' } in [t] main = print (bar ()) }}} Just compile that and you get {{{ Foo.o: In function `c1Sm_info': (.text+0x29a): undefined reference to `stg_ap_0_upd_info' }}} Why do we get that unresolved symbol? The STG code for `bar` looks like {{{ Main.bar :: forall t_aup. t_aup -> [GHC.Types.Char] [GblId, Arity=1, Str=DmdType <L,A>m2, Unf=OtherCon []] = \r srt:SRT:[rf :-> Main.foo] [x_s1RR] let { sat_s1RT [Occ=Once] :: GHC.Types.Char [LclId, Str=DmdType] = \u srt:SRT:[rf :-> Main.foo] [] Main.foo; } in : [sat_s1RT GHC.Types.[]]; }}} Look at that: an updatable thunk saying `sat_s1RT = Main.foo`! The error message is terrible, but the problem is a thunk whose only payload is a single variable. Why does that happen? The Core is {{{ bar = \ (@ t_aup) _ -> let t::Char = case foo of wild_00 { } in : @ Char t ([] @ Char) }}} The `case` is needed to change `foo`'s type from `Bool` to `Char`. The Core-to-STG pass drops the empty case alternatives as useless (rightly), but leaves a bare variable as the RHS, which confuses the code generator. We should clearly substitute `Main.foo` for `t`, either in Core-to-STG, or during code generation. Why hasn't this happened before now? It is quite hard to provoke, because floating the thunk for `t` to top level stops it happening. So it only happens if you switch off full laziness (as my test case here does), or if some very delicate inlining happens after the last float-out. The latter is very rare, but it's what happened to Alan. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11155> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 16

[GHC] #8281: The impossible happened: primRepToFFIType
by GHC 21 Sep '18

21 Sep '18

#8281: The impossible happened: primRepToFFIType -----------------------------------+--------------------------------------- Reporter: tibbe | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.2 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: Compile-time crash Unknown/Multiple | Test Case: Difficulty: Unknown | Blocking: Blocked By: | Related Tickets: | -----------------------------------+--------------------------------------- I ran into this error while trying to use GHCi on the hashable package: {{{ $ cabal repl Preprocessing library hashable-1.2.0.10... GHCi, version 7.6.2: http://www.haskell.org/ghc/ :? for help Loading package ghc-prim ... linking ... done. Loading package integer-gmp ... linking ... done. Loading package base ... linking ... done. Loading package array-0.4.0.1 ... linking ... done. Loading package deepseq-1.3.0.1 ... linking ... done. Loading package bytestring-0.10.0.2 ... linking ... done. Loading package text-0.11.3.1 ... linking ... done. Loading object (static) dist/build/cbits/fnv.o ... done Loading object (static) dist/build/cbits/getRandomBytes.o ... done final link ... done [1 of 4] Compiling Data.Hashable.RandomSource ( Data/Hashable/RandomSource.hs, interpreted ) [flags changed] [2 of 4] Compiling Data.Hashable.Class ( Data/Hashable/Class.hs, interpreted ) [flags changed] ghc: panic! (the 'impossible' happened) (GHC version 7.6.2 for x86_64-apple-darwin): primRepToFFIType Please report this as a GHC bug: http://www.haskell.org/ghc/reportabug }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8281> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 37

[GHC] #11671: Allow labels starting with uppercase with OverloadedLabels
by GHC 21 Sep '18

21 Sep '18

#11671: Allow labels starting with uppercase with OverloadedLabels -------------------------------------+------------------------------------- Reporter: inaki | Owner: Type: feature | Status: new request | Priority: normal | Milestone: Component: Compiler | Version: 8.0.1-rc1 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- The following program {{{#!hs {-# LANGUAGE OverloadedLabels, DataKinds, FlexibleInstances, MultiParamTypeClasses #-} import GHC.OverloadedLabels instance IsLabel "Three" Int where fromLabel _ = 3 test :: Int test = #Three main :: IO () main = print test }}} fails to compile in ghc 8.0 with a parse error (while it works as expected if we replace "Three" -> "three"). This may be a conscious design decision, but if not I figured I would ask if it would be possible to allow such labels starting with uppercase letters. I run into this when working on adding support for OverloadedLabels to the gobject-introspection bindings (autogenerated bindings for gtk, etc.), where it would be natural in a few places to write overloaded labels starting with a capital letter. Not hugely important, but sometimes aesthetically more pleasing (imho), and I am not aware of a good reason to forbid them. Perhaps there is one? -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11671> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 18

[GHC] #11295: Figure out what LLVM passes are fruitful
by GHC 19 Sep '18

19 Sep '18

#11295: Figure out what LLVM passes are fruitful -------------------------------------+------------------------------------- Reporter: bgamari | Owner: Type: task | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.10.3 (LLVM) | Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- Builds using GHC's LLVM backend are currently substantially slower than GHC's own native code generator. There are a few possible reasons for this, 1. the cost of forking processes and serializing/parsing LLVM's intermediate representation 2. the cost of the more powerful optimizations responsible for LLVM's (hopefully) better code generation 3. the cost of redundant optimizations overlapping effort already expended by GHC Given that some architecture (e.g. ARM) are only supported by LLVM and therefore suffer considerably at the hand of our slow builds, we should try to reduce # -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11295> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 20

[GHC] #12100: GHC 8.0.1 build segmentation fault in haddock
by GHC 19 Sep '18

19 Sep '18

#12100: GHC 8.0.1 build segmentation fault in haddock -------------------------------------+------------------------------------- Reporter: ilovezfs | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 8.0.1 Keywords: | Operating System: MacOS X Architecture: | Type of failure: Building GHC Unknown/Multiple | failed Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- Skylake iMac OS X 10.11.5. Xcode 7.3.1. march=native. This happens each time I attempt to build 8.0.1. The release candidates were not affected: {{{ "inplace/bin/ghc-stage2" -hisuf dyn_hi -osuf dyn_o -hcsuf dyn_hc -fPIC -dynamic -H32m -O -Wall -hide-all-packages -i -iutils/haddock/driver -iutils/haddock/haddock-api/src -iutils/haddock/haddock- library/vendor/attoparsec-0.12.1.1 -iutils/haddock/haddock-library/src -iutils/haddock/dist/build -iutils/haddock/dist/build/autogen -Iutils/haddock/dist/build -Iutils/haddock/dist/build/autogen -optP- DIN_GHC_TREE -optP-include -optPutils/haddock/dist/build/autogen/cabal_macros.h -package-id Cabal-1.24.0.0 -package-id array-0.5.1.1 -package-id base-4.9.0.0 -package-id bytestring-0.10.8.1 -package-id containers-0.5.7.1 -package-id deepseq-1.4.2.0 -package-id directory-1.2.6.2 -package-id filepath-1.4.1.0 -package-id ghc-8.0.1 -package-id ghc-boot-8.0.1 -package-id transformers-0.5.2.0 -package-id xhtml-3000.2.1 -funbox-strict-fields -Wall -fwarn-tabs -O2 -threaded -XHaskell2010 -no-user-package-db -rtsopts -Wno-unused-imports -Wno-deprecations -Wnoncanonical-monad- instances -odir utils/haddock/dist/build -hidir utils/haddock/dist/build -stubdir utils/haddock/dist/build -c utils/haddock/haddock- library/src/Documentation/Haddock/Types.hs -o utils/haddock/dist/build/Documentation/Haddock/Types.dyn_o "inplace/bin/ghc-stage2" -hisuf dyn_hi -osuf dyn_o -hcsuf dyn_hc -fPIC -dynamic -H32m -O -Wall -hide-all-packages -i -iutils/haddock/driver -iutils/haddock/haddock-api/src -iutils/haddock/haddock- library/vendor/attoparsec-0.12.1.1 -iutils/haddock/haddock-library/src -iutils/haddock/dist/build -iutils/haddock/dist/build/autogen -Iutils/haddock/dist/build -Iutils/haddock/dist/build/autogen -optP- DIN_GHC_TREE -optP-include -optPutils/haddock/dist/build/autogen/cabal_macros.h -package-id Cabal-1.24.0.0 -package-id array-0.5.1.1 -package-id base-4.9.0.0 -package-id bytestring-0.10.8.1 -package-id containers-0.5.7.1 -package-id deepseq-1.4.2.0 -package-id directory-1.2.6.2 -package-id filepath-1.4.1.0 -package-id ghc-8.0.1 -package-id ghc-boot-8.0.1 -package-id transformers-0.5.2.0 -package-id xhtml-3000.2.1 -funbox-strict-fields -Wall -fwarn-tabs -O2 -threaded -XHaskell2010 -no-user-package-db -rtsopts -Wno-unused-imports -Wno-deprecations -Wnoncanonical-monad- instances -odir utils/haddock/dist/build -hidir utils/haddock/dist/build -stubdir utils/haddock/dist/build -c utils/haddock/dist/build/autogen/Paths_haddock.hs -o utils/haddock/dist/build/Paths_haddock.dyn_o "inplace/bin/ghc-stage2" -hisuf dyn_hi -osuf dyn_o -hcsuf dyn_hc -fPIC -dynamic -H32m -O -Wall -hide-all-packages -i -iutils/haddock/driver -iutils/haddock/haddock-api/src -iutils/haddock/haddock- library/vendor/attoparsec-0.12.1.1 -iutils/haddock/haddock-library/src -iutils/haddock/dist/build -iutils/haddock/dist/build/autogen -Iutils/haddock/dist/build -Iutils/haddock/dist/build/autogen -optP- DIN_GHC_TREE -optP-include -optPutils/haddock/dist/build/autogen/cabal_macros.h -package-id Cabal-1.24.0.0 -package-id array-0.5.1.1 -package-id base-4.9.0.0 -package-id bytestring-0.10.8.1 -package-id containers-0.5.7.1 -package-id deepseq-1.4.2.0 -package-id directory-1.2.6.2 -package-id filepath-1.4.1.0 -package-id ghc-8.0.1 -package-id ghc-boot-8.0.1 -package-id transformers-0.5.2.0 -package-id xhtml-3000.2.1 -funbox-strict-fields -Wall -fwarn-tabs -O2 -threaded -XHaskell2010 -no-user-package-db -rtsopts -Wno-unused-imports -Wno-deprecations -Wnoncanonical-monad- instances -odir utils/haddock/dist/build -hidir utils/haddock/dist/build -stubdir utils/haddock/dist/build -c utils/haddock/haddock- library/src/Documentation/Haddock/Utf8.hs -o utils/haddock/dist/build/Documentation/Haddock/Utf8.dyn_o make[1]: *** [utils/haddock/dist/build/Haddock/Backends/Hyperlinker/Types.dyn_o] Segmentation fault: 11 make[1]: *** Waiting for unfinished jobs.... make[1]: *** [utils/haddock/dist/build/Documentation/Haddock/Types.dyn_o] Segmentation fault: 11 make[1]: *** [utils/haddock/dist/build/Haddock/GhcUtils.dyn_o] Segmentation fault: 11 make[1]: *** [utils/haddock/dist/build/Paths_haddock.dyn_o] Segmentation fault: 11 make[1]: *** [utils/haddock/dist/build/ResponseFile.dyn_o] Segmentation fault: 11 make: *** [all] Error 2 }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/12100> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 12

[GHC] #11284: Lambda-lifting fails in simple Text example
by GHC 18 Sep '18

18 Sep '18

#11284: Lambda-lifting fails in simple Text example -------------------------------------+------------------------------------- Reporter: bgamari | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.10.3 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- Consider the example, {{{#!hs import Data.Char (isSpace) import Data.List (foldl') import GHC.Exts (build) import qualified Data.Text as T longestWord :: T.Text -> Int longestWord t = foldl' max 0 $ map T.length $ fusedWords t fusedWords :: T.Text -> [T.Text] fusedWords t0 = build $ \cons nil -> let go !t | T.null t = nil | otherwise = let (w, rest) = T.span (not . isSpace) t in cons w (go $ T.dropWhile isSpace rest) in go t0 }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11284> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 21

[GHC] #10859: Generated Eq instance associates && wrongly
by GHC 18 Sep '18

18 Sep '18

#10859: Generated Eq instance associates && wrongly -------------------------------------+------------------------------------- Reporter: nomeata | Owner: simonpj Type: bug | Status: new Priority: low | Milestone: Component: Compiler | Version: 7.10.2 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: #10858 Differential Revisions: | -------------------------------------+------------------------------------- Currently, we derive this code for `(==)`: {{{ (==) (ImportDecl a1_acXi a2_acXj a3_acXk a4_acXl a5_acXm a6_acXn a7_acXo a8_acXp) (ImportDecl b1_acXq b2_acXr b3_acXs b4_acXt b5_acXu b6_acXv b7_acXw b8_acXx) = (((((((((a1_acXi == b1_acXq)) && ((a2_acXj == b2_acXr))) && ((a3_acXk == b3_acXs))) && ((a4_acXl == b4_acXt))) && ((a5_acXm == b5_acXu))) && ((a6_acXn == b6_acXv))) && ((a7_acXo == b7_acXw))) && ((a8_acXp == b8_acXx))) }}} To me this looks wrongly associated: Since `&&` is strict in the left but lazy in the right argument, shouldn’t this be associated the other way around? The compiler might clean it up later, but why not produce it correctly right away? The culprit is this line: {{{ = foldl1 and_Expr (zipWith3Equal "nested_eq" nested_eq tys as bs) }}} and I was just about to change that ot `foldr1`, but then I did some git- archeology and found that Simon changed that deliberately from `foldr1` to `foldl1` in changeset:8de16184643ea3c2f9f30b5eaed18db6ef247760. Simon, do you still recall what you were thinking when you applied this commit ... 18½years ago? :-) -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10859> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 7