July 2016 - ghc-tickets

[GHC] #9622: GHCi command to solve a constraint
by GHC 06 Sep '18

06 Sep '18

#9622: GHCi command to solve a constraint -------------------------------------+------------------------------------- Reporter: monoidal | Owner: Type: feature request | Status: new Priority: normal | Milestone: Component: Compiler (Type | Version: 7.8.3 checker) | Operating System: Keywords: | Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: Difficulty: Unknown | None/Unknown Blocked By: | Test Case: Related Tickets: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- It would be nice to have a `:solve` command for ghci that took a class constraint and returned either its derivation or an error message. A possible interface could look like so: {{{ ghci> :solve Eq (Maybe Type1, Bool) 1) instance Eq Type1 -- Defined in ‘MyModule’ 2) instance Eq a => Eq (Maybe a) -- Defined in ‘GHC.Classes’ 3) instance Eq (Maybe Type1) -- Put a ~ Int in 2) and use 1) 4) instance Eq Bool -- Defined in ‘GHC.Classes’ 5) instance (Eq a, Eq b) => Eq (a,b) -- Defined in ‘GHC.Classes’ 6) instance Eq (Maybe Type1, Bool) -- Put a ~ Maybe Type1, b ~ Bool in 5) and use 3), 4) ghci> :solve Eq (Int -> Int) No instance for Eq (Int -> Int) }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9622> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 2

[GHC] #10249: Suboptimal error message with deferred type errors
by GHC 05 Sep '18

05 Sep '18

#10249: Suboptimal error message with deferred type errors -------------------------------------+------------------------------------- Reporter: | Owner: Iceland_jack | Status: new Type: feature | Milestone: request | Version: 7.10.1 Priority: normal | Operating System: Unknown/Multiple Component: GHCi | Type of failure: None/Unknown Keywords: | Blocked By: Architecture: | Related Tickets: Unknown/Multiple | Test Case: | Blocking: | Differential Revisions: | -------------------------------------+------------------------------------- {{{#!hs $ ghci -fdefer-type-errors -ignore-dot-ghci GHCi, version 7.10.0.20150316: http://www.haskell.org/ghc/ :? for help Prelude> _ <interactive>:2:1: Warning: Found hole ‘_’ with type: IO t0 Where: ‘t0’ is an ambiguous type variable In the first argument of ‘GHC.GHCi.ghciStepIO :: IO a_aly -> IO a_aly’, namely ‘_’ In a stmt of an interactive GHCi command: it <- GHC.GHCi.ghciStepIO :: IO a_aly -> IO a_aly _ *** Exception: <interactive>:2:1: Found hole ‘_’ with type: IO t0 Where: ‘t0’ is an ambiguous type variable In the first argument of ‘GHC.GHCi.ghciStepIO :: IO a_aly -> IO a_aly’, namely ‘_’ In a stmt of an interactive GHCi command: it <- GHC.GHCi.ghciStepIO :: IO a_aly -> IO a_aly _ (deferred type error) Prelude> }}} It should ideally not expose `ghciStepIO` to the user. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10249> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 11

[GHC] #10756: Allow users to indicate inaccessible patterns
by GHC 04 Sep '18

04 Sep '18

#10756: Allow users to indicate inaccessible patterns -------------------------------------+------------------------------------- Reporter: edsko | Owner: Type: feature | Status: new request | Priority: normal | Milestone: Component: Compiler | Version: 7.10.2 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Revisions: | -------------------------------------+------------------------------------- Consider {{{#!hs {-# LANGUAGE KindSignatures #-} {-# LANGUAGE GADTs #-} data Elem :: * -> * -> * where EZ :: Elem (f , fs) f ES :: Elem fs f -> Elem (f', fs) f elemAbsurd :: Elem () f -> a elemAbsurd _ = error "inaccessible" }}} This catch-all in `elemAbsurd` is very unfortunate, because if I change my datatype and not all cases are inaccessible anymore the type checker will not be warning me. Although of course there is recent work by SPJ et al on inferring more inaccessible cases, I think it would be tremendously useful for users to be able to indicate that patterns are in fact inaccesible. I'd be very happy if I could write {{{#!hs elemAbsurd :: Elem () f -> a elemAbsurd EZ = inaccessible elemAbsurd (ES _) = inaccessible }}} Note that ghc ''can already detect that these patterns are in fact inaccessible'': it won't let me write the above: {{{ T.hs:12:12: Couldn't match type ‘()’ with ‘(f, fs)’ Inaccessible code in a pattern with constructor EZ :: forall f fs. Elem (f, fs) f, in an equation for ‘elemAbsurd’ }}} So I think it should be very very simple to change the type checker to allow to write cases like this if and only if the RHS is a specially designated symbol "inaccessible", which could be defined simply as {{{#!hs inaccessible :: a inaccessible = error "inaccessible" }}} in `GHC.Prim` or something. This would seem like very little work, and a correspondingly tiny patch, but with quite a large payoff. Future work in automatically detecting inaccessible cases would not make existing code using this style wrong, it just means that we have to write fewer inaccessible cases by hand; but even with more sophisticated inference algorithms for inaccessible cases there will still be inaccessible cases remaining. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10756> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 15

[GHC] #8414: ghc-pkg prevents dynamic library only packages
by GHC 04 Sep '18

04 Sep '18

#8414: ghc-pkg prevents dynamic library only packages ------------------------------------+------------------------------------- Reporter: AndreasVoellmy | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: ghc-pkg | Version: Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: Other Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- GHC supports compiling Haskell libraries as dynamic libraries and building executables against dynamic libraries. GHCi seems to support loading modules from dynamic libraries, too. So it would seem that it should be possible to have packages that only include dynamic libraries, omitting the .a and .o files typically generated. cabal-install allows building dynamic libraries only, for example with the command "cabal install --disable-library-vanilla --enable-shared --disable-library-profiling". However, ghc-pkg register refuses to install the package without the .a files present. This seems to be a bug with ghc-pkg. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8414> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 6

[GHC] #10374: Can't build GHC with a dynamic only GHC installation
by GHC 04 Sep '18

04 Sep '18

#10374: Can't build GHC with a dynamic only GHC installation -------------------------------------+------------------------------------- Reporter: jessicah | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Build | Version: 7.10.1 System | Operating System: Unknown/Multiple Keywords: | Type of failure: Building GHC Architecture: | failed Unknown/Multiple | Blocked By: Test Case: | Related Tickets: Blocking: | Differential Revisions: | -------------------------------------+------------------------------------- When an installation of GHC doesn't include the vanilla "way", GHC cannot be built from this existing installation of GHC. E.g. using the following mk/build.mk: {{{ V = 0 GhcLibWays = dyn SRC_HC_OPTS = -O -H64m GhcStage1HcOpts = -O -fasm GhcStage2HcOpts = -O2 -fasm GhcHcOpts = -Rghc-timing GhcLibHcOpts = -O2 DYNAMIC_BY_DEFAULT = YES NoFibWays = STRIP_CMD = : }}} Steps to reproduce: 1. build & install GHC using above configuration 2. rebuild GHC using above configuration, --with-ghc pointing to the installation created in step 1 -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10374> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 5

[GHC] #8441: Allow family instances in an hs-boot file
by GHC 02 Sep '18

02 Sep '18

#8441: Allow family instances in an hs-boot file ------------------------------------+------------------------------------- Reporter: goldfire | Owner: Type: feature request | Status: new Priority: low | Milestone: Component: Compiler | Version: 7.7 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- Compiling an .hs-boot file with a data instance leads to this error: {{{ Illegal family instance in hs-boot file }}} Yet, data instances make good sense in an hs-boot file, in case another module wants to access a constructor declared in the instance. Furthermore, it may sometimes be desirable to allow type family instances in a hs-boot file, as well, in case some including modules need the instance for type simplification. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8441> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 10

[GHC] #8279: bad alignment in code gen yields substantial perf issue
by GHC 29 Aug '18

29 Aug '18

#8279: bad alignment in code gen yields substantial perf issue ------------------------------+-------------------------------------------- Reporter: carter | Owner: Type: bug | Status: new Priority: highest | Milestone: Component: Compiler | Version: 7.7 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: Runtime performance bug Unknown/Multiple | Test Case: Difficulty: Unknown | Blocking: Blocked By: | Related Tickets: | ------------------------------+-------------------------------------------- independently, a number of folks have noticed that in various ways, GHC currently has quite a few different memory alignment related performance problems that can have >= 10% perf impact! Nicolas Frisby notes {{{ On my laptop, a program showed a consistent slowdown with -fdicts-strict I didn't find any obvious causes in the Core differences, so I turned to Intel's Performance Counter Monitor for measurements. After trying a few counters, I eventuall saw that there are about an order of magnitude more misaligned memory loads with -fdicts-strict than without, so I think that may be a significant part of the slowdown. I'm not sure if these are code or data reads. Can anyone suggest how to validate this hypothesis about misaligned reads? A subsequent commit has changed the behavior I was seeing, so I'm not interested in alternatives means to determine if -fdicts-strict is somehow at fault — I'm just asking specifically about data/code memory alignment in GHC and how to diagnose/experiment with it. }}} Reid Barton has independently noted {{{ so I did a nofib run with llvm libraries, ghc quickbuild so there's this really simple benchmark tak, https://github.com/ghc/nofib/blob/master/imaginary/tak/Main.hs it doesn't use any libraries at all in the main loop because the Ints all get unboxed but it's still 8% slower with quick-llvm (vs -fasm) weird right? [14:36:30] <carter> could you post the asm it generates for that function? [14:36:49] <rwbarton> well it's identical between the two versions <rwbarton> but they get linked at different offsets because some llvm sections are different sizes <rwbarton> if I add a 128-byte symbol to the .text section to move it to the same address... then the llvm libs version is just as fast <rwbarton> well, apparently 404000 is good and 403f70 is bad <rwbarton> I guess I can test other alignments easily enough <rwbarton> I imagine it wants to start on a cache line <rwbarton> but I don't know if it's just a coincidence that it worked with the ncg libraries <rwbarton> that it got a good location <rwbarton> for this program every 32-byte aligned address is 10+% faster than any merely 16-byte aligned address <rwbarton> and by alignment I mean alignment of the start of the Haskell code section <carter> haswell, sandybridge, ivy bridge, other? <rwbarton> dunno <rwbarton> I have similar results on Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz <rwbarton> and on Quad-Core AMD Opteron(tm) Processor 2374 HE <carter> ok <rwbarton> trying a patch now that aligns all *_entry symbols to 32 bytes }}} the key point in there is that on the tak benchmark, better alignment for the code made a 10% perf differnce on TAk on Core2 and opteron cpus! benjamin scarlet and Luite are speculating that this may be further induced by Tables next to code (TNC) accidentally creating bad alignment so theres cache line pollution / conflicts between the L1 Instruction- cache and data-caches. So one experiment would be to have the TNC transform pad after the table so the function entry point starts on the next cacheline? -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8279> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 26

[GHC] #11350: Allow visible type application in patterns
by GHC 28 Aug '18

28 Aug '18

#11350: Allow visible type application in patterns -------------------------------------+------------------------------------- Reporter: Iceland_jack | Owner: Type: feature | Status: new request | Priority: normal | Milestone: Component: Compiler | Version: 8.1 Keywords: | Operating System: Unknown/Multiple TypeApplications PatternSynonyms | Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- Constructors (and pattern synonyms) when treated as expressions may be applied to types: {{{#!hs {-# LANGUAGE TypeApplications #-} Nothing :: Maybe a Nothing @() :: Maybe () pattern Pair :: a -> a -> (a, a) pattern Pair x y = (x, y) Pair :: a -> a -> (a, a) Pair @Int :: Int -> Int -> (Int, Int) }}} But using them in patterns won't parse: {{{#!hs -- parse error in pattern: @Int maybeToList :: Maybe Int -> [Int] maybeToList (Nothing @Int) = [] maybeToList (Just @Int x) = [x] -- parse error in pattern: @Int add :: (Int, Int) -> Int add (Pair @Int x y) = x + y }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11350> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 23

[GHC] #8733: I/O manager causes unnecessary syscalls in send/recv loops
by GHC 26 Aug '18

26 Aug '18

#8733: I/O manager causes unnecessary syscalls in send/recv loops ------------------------------------+------------------------------------- Reporter: tibbe | Owner: simonmar Type: bug | Status: new Priority: normal | Milestone: Component: Runtime System | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- Network applications often call send followed by recv, to send a message and then read an answer. This causes syscall traces like this one: {{{ recvfrom(13, ) -- Haskell thread A sendto(13, ) -- Haskell thread A recvfrom(13, ) = -1 EAGAIN -- Haskell thread A epoll_ctl(3, ) -- Haskell thread A (a job for the IO manager) recvfrom(14, ) -- Haskell thread B sendto(14, ) -- Haskell thread B recvfrom(14, ) = -1 EAGAIN -- Haskell thread B epoll_ctl(3, ) -- Haskell thread B (a job for the IO manager) }}} The recvfrom call always fails, as the response from the partner we're communicating with won't be available right after we send the request. We ought to consider descheduling the thread as soon as sending is "done". The hard part is to figure out when that is. See http://www.yesodweb.com/blog/2014/02/new-warp for a real world example. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8733> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 21

[GHC] #11470: Support changing cross compiler target at runtime
by GHC 24 Aug '18

24 Aug '18

#11470: Support changing cross compiler target at runtime -------------------------------------+------------------------------------- Reporter: ezyang | Owner: Type: feature | Status: new request | Priority: normal | Milestone: Component: Compiler | Version: 7.10.3 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- Relevant mailing list thread: https://mail.haskell.org/pipermail/ghc- devs/2016-January/011064.html At the moment, GHC's cross-compiling support requires you to build a cross-compiler for every target platform from scratch. (https://ghc.haskell.org/trac/ghc/wiki/CrossCompilation) There are two reasons for this: 1. GHC uses a configure script to interrogate the GCC toolchain about the vagaries of cross-compilation, some parameters of which get baked into various build system scripts and header files and such. Some of this information wends its way into the final built GHC executable. 2. GHC needs to build the boot libraries, using the stage 1 compiler, targeting the cross compiler. It would be very useful to move this configuration from configure time to run time, so that a user can use GHC as a cross-compiler without having to recompile GHC. That is, we would like to (1) ensure that any information from the configure script can alternately be supplemented at runtime, (2) that users can cross-compile the boot libraries on-demand (since GHC won't ship with the ARM versions of the boot libraries), and (3) rearchitect GHC internally so that it handles knows to keep separate the interface files/package database for various cross compilation targets. Such a change will make cross-compiling more convenient (the iOS cross- compiler currently requires GHC to be built twice, once for ARM and once for the simulator!) and will also pave the way for supporting Template Haskell and compiler plugins in the cross-compiler, since a GHC that knows how to deal with both the target and host platforms can simply ensure that it only loads code built for the host platform (a user can then, if necessary, build code twice, once for the host for Template Haskell, and once for the target). Unclear points of design: * How should GHC get the information about the GCC cross-compiler toolchain (which currently is gotten by `configure`?) Preferably, not by running a `configure` script every time you invoke it. What is this information anyway? * How should GHC rebuild the boot libraries? Maybe `cabal-install` can simply handle this for you. Note: please update the top of this ticket as the design becomes clearer. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11470> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 11