August 2016 - ghc-tickets

[GHC] #11592: Self-kinded type varialbe accepted
by GHC 10 Jan '17

10 Jan '17

#11592: Self-kinded type varialbe accepted -------------------------------------+------------------------------------- Reporter: simonpj | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.10.3 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- Found when chasing #11407 {{{ data T (a::a) = Blah -- Accepted data S (b :: a) a = ... -- Rejected with: variable ‘a’ used as a kind variable before being bound -- as a type variable. Perhaps reorder your variables? }}} But `T` should be rejected too, for the same reason as `S` -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11592> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 6

[GHC] #11040: Split SRT tables on Mac OS
by GHC 10 Jan '17

10 Jan '17

#11040: Split SRT tables on Mac OS ----------------------------------------+--------------------------------- Reporter: olsner | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.10.2 Keywords: | Operating System: MacOS X Architecture: Unknown/Multiple | Type of failure: None/Unknown Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: ----------------------------------------+--------------------------------- Split off from https://phabricator.haskell.org/D1242#inline-11490 Mac uses subsections via symbols to allow dead code stripping, but doesn't seem to do anything special with the SRT tables (in `HscMain.doCodeGen`), so either I'm missing something or Mac doesn't actually get much useful dead code stripping at all from the subsections feature because the SRT tables would keep everything alive. Perhaps Mac should just always do SRT splitting. Looks like you need to manually add `-optl-Wl,-dead_strip` to test this, since that's not enabled by default. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11040> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 4

[GHC] #11551: Get doctests into testsuite
by GHC 10 Jan '17

10 Jan '17

#11551: Get doctests into testsuite -------------------------------------+------------------------------------- Reporter: lwm | Owner: Type: task | Status: new Priority: normal | Milestone: Component: Core | Version: 7.10.3 Libraries | Keywords: | Operating System: Unknown/Multiple documentation, doctest | Architecture: | Type of failure: Documentation Unknown/Multiple | bug Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- It seems like a bit of a shame not to have Mr.Orlitzky's lovely doctests not running with the testsuite. Or perhaps to at least have some sort of `make doctest`. If there is some interest to get this working, I'd like to take a look at submitting a patch. Here are the previous documentation patches I can find: https://phabricator.haskell.org/p/mjo/ I can see the following files that have doctests: {{{ ruby-2.2.1 ~/work/contributing/ghc (master) [12:35:44] lwm$ grep -R "=== __Examples__" libraries/base/ | uniq grep: libraries/base/Data/Maybe.hs:-- ==== __Examples__ libraries/base/Data/Either.hs:-- ==== __Examples__ libraries/base/Data/List.hs:-- ==== __Examples__ libraries/base/Data/Functor.hs:-- ==== __Examples__ libraries/base/Data/Bool.hs:-- ==== __Examples__ libraries/base/Data/Char.hs:-- ==== __Examples__ libraries/base/GHC/Unicode.hs:-- ==== __Examples__ libraries/base/Text/Printf.hs:-- ==== __Examples__ }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11551> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 7

[GHC] #8761: Make pattern synonyms work with Template Haskell
by GHC 10 Jan '17

10 Jan '17

#8761: Make pattern synonyms work with Template Haskell ------------------------------------+------------------------------------- Reporter: goldfire | Owner: Type: feature request | Status: new Priority: normal | Milestone: Component: Template Haskell | Version: 7.8.1-rc1 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- Template Haskell has no support for pattern synonyms. This should be added. Specifically: * Create syntax in `Language.Haskell.TH.Syntax` and corresponding functions in `Language.Haskell.TH.Lib` * Support in !DsMeta for desugaring pattern synonym quotations. See `rep_bind`. * Support in Convert for splicing in pattern synonyms. * Support in !TcSplice for reifying pattern synonyms. See `reifyThing`. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8761> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 26

[GHC] #12511: template-haskell's Language.Haskell.Syntax module should be Trustworthy
by GHC 08 Jan '17

08 Jan '17

#12511: template-haskell's Language.Haskell.Syntax module should be Trustworthy -------------------------------------+------------------------------------- Reporter: int-e | Owner: Type: feature | Status: new request | Priority: normal | Milestone: Component: libraries | Version: 8.0.1 (other) | Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- The reason why this module isn't inferred safe is that it uses `unsafePerformIO` to create a global `IORef`. From a SafeHaskell perspective, this module isn't very useful in itself, but its unsafety prevents other modules that import it to provide class instances from being inferred as safe. A concrete example is https://hackage.haskell.org/package/exceptions-0.8.3/docs/src/Control- Monad-Catch.html#line-186 -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/12511> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 6

[GHC] #9748: Disambiguate IO actions in GHCi with :set +t
by GHC 06 Jan '17

06 Jan '17

#9748: Disambiguate IO actions in GHCi with :set +t -------------------------------------+------------------------------------- Reporter: Iceland_jack | Owner: Type: feature request | Status: new Priority: low | Milestone: Component: GHCi | Version: 7.8.2 Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Easy (less than 1 | Type of failure: hour) | None/Unknown Blocked By: | Test Case: Related Tickets: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- Currently GHCi's `:set +t` displays the same type for the following: {{{#!hs % ghci -ignore-dot-ghci GHCi, version 7.8.2: http://www.haskell.org/ghc/ :? for help Loading package ghc-prim ... linking ... done. Loading package integer-gmp ... linking ... done. Loading package base ... linking ... done. Prelude> :set +t Prelude> 'a' 'a' it :: Char Prelude> return 'a' 'a' it :: Char Prelude> return 'a' :: IO Char 'a' it :: Char }}} A user at `#haskell-beginners` ran into a problem where they mistook an expression that defaulted to IO for a pure expression (`Id . even <$> pure 5`), `:set +t` was suggested but ended up showing the incorrect type: {{{#!hs ghci> Id . even <$> pure 5 Id False it :: Id Bool }}} This is bad for pedagogical reasons, it would be an improvement to display the following: {{{#!hs Prelude> :set +t Prelude> 'a' 'a' it :: Char Prelude> return 'a' 'a' it :: Char <- return 'a' :: IO Char Prelude> return 'a' :: IO Char 'a' it :: Char <- return 'a' :: IO Char }}} mirroring existing syntax: {{{#!hs Prelude> :set -XScopedTypeVariables Prelude> a :: Char <- return 'a' :: IO Char a :: Char }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9748> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 8

[GHC] #10352: Properly link Haskell shared libs on ELF systems
by GHC 05 Jan '17

05 Jan '17

#10352: Properly link Haskell shared libs on ELF systems -------------------------------------+------------------------------------- Reporter: duncan | Owner: Type: task | Status: new Priority: normal | Milestone: Component: Package | Version: 7.11 system | Operating System: Linux Keywords: | Type of failure: None/Unknown Architecture: | Blocked By: Unknown/Multiple | Related Tickets: Test Case: | Blocking: | Differential Revisions: | -------------------------------------+------------------------------------- Since the early days of building Haskell shared libs on Linux we have been using a scheme that is really a bit of a hack. We should do it properly. In my blog post on this from 2009 (http://www.well-typed.com/blog/30/) I said: > If we use ldd again to look at the libfoo.so that we've made we will notice that it is missing a dependency on the rts library. This is problem that we've yet to sort out, so for the moment we can just add the dependency ourselves: > > $ ghc --make -dynamic -shared -fPIC Foo.hs -o libfoo.so \ > -lHSrts-ghc6.11 -optl-Wl,-rpath,/opt/ghc/lib/ghc-6.11/ > > The reason it's not linked in yet is because we need to be able to switch which version of the rts we're using without having to relink every library. For example we want to be able to switch between the debug, threaded and normal rts versions. It's quite possible to do this and it just needs a bit more rearranging in the build system to sort it out. Once it's done you'll even be able to switch rts at runtime, eg: > > $ LD_PRELOAD=/opt/ghc/lib/ghc-6.11/libHSrts_debug-ghc6.11.so > $ ./Hello So in general, if a shared lib requires symbols from another shared lib then it should depend on it. In ELF terminology that means a NEEDED entry to say this lib needs that other lib. This is important to be able to link and load these shared libraries, otherwise they can have dangling dependencies. But we don't do this. For the specific case of the RTS we do not link Haskell shared libs against the RTS. So they have lots of dangling symbols. These libraries cannot be loaded on their own, e.g. with `dlopen()`. This is bad, and has other knock-on consequences. Why don't we link to the RTS? It's because historically (with static linking) GHC had had the ability to select the flavour of the RTS when final executables are linked, not when intermediate libraries are created. This works because the RTS flavours share a common ABI. This is a useful feature as it lets us select the SMP or debug or other RTS at final link time. So when we made up the first shared lib scheme on ELF we had to support this. Our initial scheme was like this: don't link Haskell library DSOs against the RTS, only like the final exe against the RTS. Each RTS flavour has a separate SONAME, e.g. `libHSrts_thr-ghc7.8.4.so` or `libHSrts_debug- ghc7.8.4.so`. This works because the runtime linker looks at the final exe first and loads the RTS, and then when other libs are loaded the symbols all resolve. Why can't we link all the libraries against the RTS? Currently each RTS flavour has a different SONAME, which is the key that the dynamic linker uses to identify each library. So if we did link all the Haskell libs against "the" RTS we would have to pick which one at the point at which we create the library, and that'd stop us from being able to choose later. So, can we use a better scheme? We want one that doesn't leave dangling undefined references in intermediate Haskell libs, and is also compatible with the ability to select the flavour of the RTS at final exe link time (or even override it at load time). Yes we can! The first thing to note is that to be interchangeable, all the RTS flavours (that share a compatible ABI) need to have the same SONAME. So for example, all the (non-profiling) RTS DSO files have to have the internal SONAME of `libHSrts-ghc7.8.4.so`. Once they all have the same SONAME, then it's ok for all the Haskell libs to specify a NEEDED dependency on that rts SONAME. But if they have the same SONAME, what do the files get called, where do they live and how are they found? The trick is to make use of the search path. Put each RTS flavour in a different directory, but otherwise with the same filename, e.g. `lib/rts-1.0/thr/libHSrts-ghc7.8.4.so`, `lib/rts-1.0/debug/libHSrts-ghc7.8.4.so` etc. Each library DSO and exe has its list of NEEDED entries, and it has an RPATH entry used to find those libraries if they're not loaded yet. The key is the "if they're not loaded yet" bit. Remember that the linker uses the SONAME as the key to decide if the lib is loaded yet or not. So the libraries could all have an RPATH entry to say to look for the RTS in the directory containing the default RTS flavour. But then the top level exe (or foreign/export shared lib) can also link to the RTS directly (ie an NEEDED entry) and can specify an RPATH which can be for any of the rts flavours. When the linker loads the top level exe, it will loads the selected RTS using the exe's RPATH, and then when the linker sees other Haskell libs that have a NEEDED entry on the RTS it will ignore them because the RTS's SONAME is already loaded. So concretely, instead of: lib/ghc-${ver}/rts-1.0/libHSrts-ghc${ver}.so lib/ghc-${ver}/rts-1.0/libHSrts_thr-ghc${ver}.so lib/ghc-${ver}/rts-1.0/libHSrts_debug-ghc${ver}.so lib/ghc-${ver}/rts-1.0/libHSrts_l-ghc${ver}.so lib/ghc-${ver}/rts-1.0/libHSrts_thr_l-ghc${ver}.so lib/ghc-${ver}/rts-1.0/libHSrts_thr_debug-ghc${ver}.so each with a different SONAME we'd have lib/ghc-${ver}/rts-1.0/libHSrts-ghc${ver}.so lib/ghc-${ver}/rts-1.0/thr/libHSrts-ghc${ver}.so lib/ghc-${ver}/rts-1.0/debug/libHSrts-ghc${ver}.so lib/ghc-${ver}/rts-1.0/l/libHSrts-ghc${ver}.so lib/ghc-${ver}/rts-1.0/thr_l/libHSrts-ghc${ver}.so lib/ghc-${ver}/rts-1.0/thr_debug/libHSrts-ghc${ver}.so each with the same SONAME When linking libs we would always use `-lHSrts -rpath lib/ghc-${ver}/rts-1.0` When linking exes (or shared libs for external consumption) we would use both `-lHSrts` and `-rpath lib/ghc-${ver}/${rtsflavour}/rts-1.0`. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10352> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 22

[GHC] #9248: Document -XHaskell98 and -XHaskell2010 in flag reference
by GHC 05 Jan '17

05 Jan '17

#9248: Document -XHaskell98 and -XHaskell2010 in flag reference ------------------------------------+------------------------------------- Reporter: goldfire | Owner: goldfire Type: bug | Status: new Priority: normal | Milestone: Component: Documentation | Version: 7.8.2 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9248> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 3

[GHC] #12426: Allow smart constructors their own types
by GHC 05 Jan '17

05 Jan '17

#12426: Allow smart constructors their own types -------------------------------------+------------------------------------- Reporter: dfeuer | Owner: Type: feature | Status: new request | Priority: normal | Milestone: 8.2.1 Component: Compiler | Version: 8.0.1 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- GHC currently offers one-way pattern synonyms allowing general deconstruction with nice syntax. And it offers bidirectional pattern synonyms, which toss in construction functions that start with capital letters. Unfortunately, it forces the construction and deconstruction sides to share a type. This is sometimes rather unfortunate. The documentation itself points out the limitation with regard to matching numeric literals (where deconstruction requires `Eq`). Another example is Edward Yang's `NF` type, whose smart constructor (but not deconstructor) requires `NFData`. I think the easiest fix is to allow a type signature in the `where` clause of a pattern synonym definition. {{{#!hs pattern X :: Eq a => a -> Foo pattern X q <- ... where X :: X a => a -> Foo X a = ... }}} Ideally, I'd like to offer the other one-way (constructor without pattern) as well, but I care less about that. }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/12426> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 2

[GHC] #11096: Builtin encoder/decoder should be used for Latin-1
by GHC 05 Jan '17

05 Jan '17

#11096: Builtin encoder/decoder should be used for Latin-1 -------------------------------------+------------------------------------- Reporter: bgamari | Owner: hvr Type: feature | Status: new request | Priority: normal | Milestone: 8.0.1 Component: Compiler | Version: 7.10.2 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- Filed on behalf of hvr. Currently `mkTextEncoding'` delegates decoding/encoding from/to latin-1 to `iconv`. This shouldn't be necessary as we have latin-1 an encoder in `base`. Let's use it. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11096> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 4