September 2016 - ghc-tickets

[GHC] #10613: Mechanism for checking that we only enter single-entry thunks once
by GHC 10 Apr '17

10 Apr '17

#10613: Mechanism for checking that we only enter single-entry thunks once -------------------------------------+------------------------------------- Reporter: bgamari | Owner: Type: feature | Status: new request | Milestone: Priority: normal | Version: 7.10.1 Component: Compiler | Operating System: Unknown/Multiple Keywords: | Type of failure: Other Architecture: | Blocked By: Unknown/Multiple | Related Tickets: Test Case: | Blocking: | Differential Revisions: | -------------------------------------+------------------------------------- During this week's GHC call it came up that it would be nice to have a linting mechanism for verifying that we only enter single-entry thunks once, as currently this invariant appears to be completely unchecked. Currently we do not record whether a thunk is intended to be single-entry when we emit its code. Moreover, I don't believe there is any room for this left in the info table to record this fact. There are two ways I can think of accomodating this, * stealing a bit from the thunk type field * add a flags field to `StgDebugInfo` such that the lint requires the `debug` way As far as implementing the check itself, I think it should be rather straightforward. When we enter a thunk we simply want to check whether it is single-entry. If it is then we replace it with a special type of `BLACKHOLE`-like thunk which crashes the program (or merely emits a warning) on entry. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10613> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 26

[GHC] #8816: Make SPARC registerised again.
by GHC 10 Apr '17

10 Apr '17

#8816: Make SPARC registerised again. -----------------------------------+--------------------------------- Reporter: kgardas | Owner: Type: feature request | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.3 Keywords: | Operating System: Solaris Architecture: sparc | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | -----------------------------------+--------------------------------- It looks like recent GHC switched to unregisterised build on SPARC by default. This is kind of regression with the past GHCs where registerised builds were supported. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8816> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 7

[GHC] #12396: Panic when specializing in another module
by GHC 08 Apr '17

08 Apr '17

#12396: Panic when specializing in another module -------------------------------------+------------------------------------- Reporter: crockeea | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 8.0.1 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: Compile-time Unknown/Multiple | crash Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- In the attached example (which requires `criterion` and `deepseq`), when compiled with `ghc -O2 -funfolding-use-threshold1000 Main.hs`, I get the following error on `Main.hs`: {{{ ghc: panic! (the 'impossible' happened) (GHC version 8.0.1 for x86_64-unknown-linux): StgCmmEnv: variable not found $d(%,%)_aaTF local binds for: $trModule $sfool $trModule1 $trModule2 $wlvl_rgY8 lvl_rgY9 lvl1_rgYa lvl3_rgYc lvl4_rgYd lvl5_rgYe lvl6_rgYf lvl7_rgYg lvl8_rgYh lvl9_rgYi lvl10_rgYj lvl11_rgYk lvl12_rgYl lvl13_rgYm lvl14_rgYn lvl15_rgYo lvl16_rgYp lvl17_rgYq lvl18_rgYr lvl19_rgYs lvl20_rgYt lvl21_rgYu lvl22_rgYv lvl23_rgYw lvl24_rgYx lvl25_rgYy lvl26_rgYz lvl27_rgYA lvl28_rgYB lvl29_rgYC lvl30_rgYD lvl31_rgYE lvl32_rgYF lvl33_rgYG lvl34_rgYH lvl35_rgYI lvl36_rgYJ lvl37_rgYK lvl38_rgYL lvl39_rgYM lvl40_rgYN lvl41_rgYO lvl42_rgYP lvl43_rgYQ lvl44_rgYR lvl45_rgYS lvl46_rgYT lvl47_rgYU lvl48_rgYV lvl49_rgYW lvl50_rgYX lvl51_rgYY lvl52_rgYZ lvl53_rgZ0 lvl54_rgZ1 lvl55_rgZ2 lvl56_rgZ3 lvl57_rgZ4 lvl58_rgZ5 lvl59_rgZ6 lvl60_rgZ7 lvl61_rgZ8 lvl62_rgZ9 lvl63_rgZa lvl64_rgZb lvl65_rgZc lvl66_rgZd ww1_rgZe ww2_rgZf ww3_rgZg ww4_rgZh pinfo_rgZi pinfo1_rgZj pinfo2_rgZk pinfo3_rgZl lvl67_rgZm lvl68_rgZn lvl69_rgZo $wgo12_rgZp eta_sh1k wild_sh1l v_sh1m sat_sh1n }}} I initially found this bug when I added a `SPECIALIZE` pragma for `fool` in `Main.hs`. However, I need `funfolding-use-threshold1000` and the constraint synonym `UCRTElt` in `Foo.hs` to trigger the bug. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/12396> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 5

[GHC] #10053: problem in ghci calling main after loading compiled code
by GHC 06 Apr '17

06 Apr '17

#10053: problem in ghci calling main after loading compiled code -------------------------------------+------------------------------------- Reporter: George | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: GHCi | Version: 7.10.1-rc2 Keywords: | Operating System: MacOS X Architecture: x86_64 | Type of failure: Incorrect result (amd64) | at runtime Test Case: | Blocked By: Blocking: | Related Tickets: Differential Revisions: | -------------------------------------+------------------------------------- ghci GHCi, version 7.10.0.20150123: http://www.haskell.org/ghc/ :? for help Prelude> :load rsa Ok, modules loaded: Main. Prelude Main> :show modules Main ( rsa.hs, rsa.o ) Prelude Main> main Too late for parseStaticFlags: call it before runGhc or runGhcT *** Exception: ExitFailure 1 Prelude Main> note, there is no failure if I load interpreted code -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10053> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 26

[GHC] #11544: SCC call-stack from `error` missing call-sites
by GHC 05 Apr '17

05 Apr '17

#11544: SCC call-stack from `error` missing call-sites -------------------------------------+------------------------------------- Reporter: gridaphobe | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Profiling | Version: 8.0.1-rc1 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- For some reason the `-prof` stack that `error` attaches only includes the top-level CAF. This is with the default build settings (which I believe are the release settings?) {{{ $ cat Foo.hs main = print (foo [1]) foo xs = tail (tail xs) $ ./inplace/bin/ghc-stage2 --make -prof -fprof-auto-calls Foo.hs [1 of 1] Compiling Main ( Foo.hs, Foo.o ) [flags changed] Linking Foo ... $ ./Foo Foo: Prelude.tail: empty list CallStack (from -prof): GHC.List.CAF (<entire-module>) }}} I would expect to at least see the call-site of `foo` (if not also `tail`) in the stack. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11544> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 3

[GHC] #11425: The GHC API doesn't provide a good hscTarget option for tooling
by GHC 05 Apr '17

05 Apr '17

#11425: The GHC API doesn't provide a good hscTarget option for tooling -------------------------------------+------------------------------------- Reporter: bgamari | Owner: Type: feature | Status: new request | Priority: high | Milestone: 8.2.1 Component: GHC API | Version: 7.10.3 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: Other Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- Tools like ghc-mod typically just want `TypecheckedModule`s. Sadly, the GHC API currently doesn't provide a good way to get at these in all cases (see this [https://github.com/DanielG/ghc-mod/issues/205|ghc-mod ticket]). Each of the options we offer are cursed with their own limitations (largely quoting from the ghc-mod ticket), == HscNothing == At first glance this looks like what you would want. But... * Pros * Doesn't generate code of any sort and is therefore rather lightweight * Cons * It lacks support for Template Haskell * Has trouble with `foreign export`s * [https://github.com/DanielG/ghc-mod/pull/145|Fails} to issue pattern match checker warnings == HscInterpreted == Okay, so `HscNothing` doesn't work. Maybe `HscInterpreted` is better? * Pros * Supports Template Haskell * Cons * Can't deal with unboxed tuples (#1257) * Slower as we need to produce unnecessary bytecode * Large memory footprint * Also can't deal with `foreign export`s == HscAsm == * Pros * Supports all compilable code * Cons * Slow * Produces `.o` files This is quite unfortunate. It seems like we need something in between `HscNothing` and `HscInterpreted` which is willing to use the interpreter to evaluate Template Haskell splices when necessary, but doesn't produce bytecode. Unfortunately it's unclear what to do about `foreign export` (but arguably most tools would be fine with some approximate representation). -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11425> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 7

[GHC] #8373: Cross-compiling from x86_64-unknown-linux-gnu to x86_64-sun-solaris2
by GHC 04 Apr '17

04 Apr '17

#8373: Cross-compiling from x86_64-unknown-linux-gnu to x86_64-sun-solaris2 ----------------------------------+---------------------------------------- Reporter: AlainODea | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: Keywords: | Operating System: Unknown/Multiple Architecture: x86_64 (amd64) | Type of failure: Building GHC failed Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ----------------------------------+---------------------------------------- During a cross-build from '''x86_64-unknown-linux-gnu''' to '''x86_64-sun- solaris2''' it tries to run '''/home/alain_odea/Documents/ghc/inplace/lib/bin/mkGmpDerivedConstants''' on my host/build machine and fails. Since it's a Solaris binary not a Linux binary it would need to be run on a Solaris host. If I run the following script to configure and run my cross-build: {{{ #!/bin/bash export TARGET=x86_64-sun-solaris2.11 export PREFIX=$HOME/Documents/gcc/cross/$TARGET export SYSROOT=$PREFIX/sysroot export PATH=$PATH:$PREFIX/bin export GCC=$PREFIX/bin/$TARGET-gcc export LD=$PREFIX/bin/$TARGET-ld export NM=$PREFIX/bin/$TARGET-nm export OBJDUMP=$PREFIX/bin/$TARGET-objdump # cabal install happy alex haddock # sudo apt-get update # sudo apt-get install --assume-yes ghc libncurses5-dev \ # mesa-common-dev freeglut3-dev libedit-dev git clone git://github.com/ghc/ghc pushd ghc echo "Stage1Only = YES" >> mk/build.mk cp mk/build.mk{.sample,} ./sync-all --no-dph get perl boot patch -d libraries/haskeline/ -p1 < \ ../ghc-patches/0001-Include-termios.h-for- solaris2-host.-Fixes-8366.patch cp $SYSROOT/opt/local/include/gmp.h libraries/integer-gmp/gmp/ ./configure \ --host=x86_64-unknown-linux-gnu \ --build=x86_64-unknown-linux-gnu \ --target=x86_64-sun-solaris2 \ --with-gcc=$GCC \ --with-ld=$LD \ --with-nm=$NM \ --with-objdump=$OBJDUMP make }}} I get the following failure output: {{{ ~/Documents/ghc ~/Documents patching file System/Console/Haskeline/Backend/Posix.hsc Reversed (or previously applied) patch detected! Assume -R? [n] Apply anyway? [n] Skipping patch. 1 out of 1 hunk ignored -- saving rejects to file System/Console/Haskeline/Backend/Posix.hsc.rej checking for gfind... no checking for find... /usr/bin/find checking for sort... /usr/bin/sort checking for GHC version date... inferred 7.7.20130924 checking for ghc... /usr/local/bin/ghc checking version of ghc... 7.6.3 checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-sun-solaris2 GHC build : x86_64-unknown-linux GHC host : x86_64-unknown-linux GHC target : x86_64-sun-solaris2 configure: Building in-tree ghc-pwd checking for path to top of build tree... /home/alain_odea/Documents/ghc checking for x86_64-unknown-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for llc... no checking for opt... no checking whether #! works in shell scripts... yes checking for perl... /usr/bin/perl checking version of gcc... 4.7.3 checking whether C compiler is clang... no checking whether C compiler has an LLVM back end... no checking whether ld is GNU ld... yes checking whether ld understands --build-id... yes checking whether ld understands -no_compact_unwind... yes checking whether ld understands -filelist... no checking Setting up CFLAGS, LDFLAGS, IGNORE_LINKER_LD_FLAGS and CPPFLAGS... done checking Setting up CONF_CC_OPTS_STAGE0, CONF_GCC_LINKER_OPTS_STAGE0, CONF_LD_LINKER_OPTS_STAGE0 and CONF_CPP_OPTS_STAGE0... done checking Setting up CONF_CC_OPTS_STAGE1, CONF_GCC_LINKER_OPTS_STAGE1, CONF_LD_LINKER_OPTS_STAGE1 and CONF_CPP_OPTS_STAGE1... done checking Setting up CONF_CC_OPTS_STAGE2, CONF_GCC_LINKER_OPTS_STAGE2, CONF_LD_LINKER_OPTS_STAGE2 and CONF_CPP_OPTS_STAGE2... done checking for extra options to pass gcc when compiling via C... -fwrapv checking how to run the C preprocessor... gcc -E checking for .subsections_via_symbols... no checking whether your assembler supports .ident directive... yes checking for GNU non-executable stack support... yes checking for a working context diff... diff -U 1 checking for a BSD-compatible install... /usr/bin/install -c checking for ar... /usr/bin/ar checking whether /usr/bin/ar is GNU ar... yes checking for ar arguments... q checking whether /usr/bin/ar supports @file... yes checking for x86_64-unknown-linux-gnu-ranlib... no checking for ranlib... ranlib configure: WARNING: using cross tools not prefixed with host triplet checking whether ln -s works... yes checking for gsed... no checking for sed... /bin/sed checking for time... /usr/bin/time checking for gnutar... no checking for gtar... no checking for tar... /bin/tar checking for gpatch... no checking for patch... /usr/bin/patch checking for dtrace... no checking for HsColour... /home/alain_odea/.cabal/bin/HsColour checking for xmllint... no configure: WARNING: cannot find xmllint in your PATH, you will not be able to validate your documentation checking for xsltproc... no configure: WARNING: cannot find xsltproc in your PATH, you will not be able to build the HTML documentation checking for dblatex... no configure: WARNING: cannot find dblatex in your PATH, you will not be able to build the PDF and PS documentation checking for ghc-pkg matching /usr/local/bin/ghc... /usr/local/bin/ghc-pkg checking for happy... /home/alain_odea/.cabal/bin/happy checking for version of happy... 1.19.0 checking for alex... /home/alain_odea/.cabal/bin/alex checking for version of alex... 3.1.0 checking for ANSI C header files... (cached) yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking bfd.h usability... no checking bfd.h presence... no checking for bfd.h... no checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking dirent.h usability... yes checking dirent.h presence... yes checking for dirent.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking grp.h usability... yes checking grp.h presence... yes checking for grp.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking nlist.h usability... yes checking nlist.h presence... no configure: WARNING: nlist.h: accepted by the compiler, rejected by the preprocessor! configure: WARNING: nlist.h: proceeding with the compiler's result checking for nlist.h... yes checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking pwd.h usability... yes checking pwd.h presence... yes checking for pwd.h... yes checking signal.h usability... yes checking signal.h presence... yes checking for signal.h... yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking sys/mman.h usability... yes checking sys/mman.h presence... yes checking for sys/mman.h... yes checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking sys/timeb.h usability... yes checking sys/timeb.h presence... yes checking for sys/timeb.h... yes checking sys/timers.h usability... no checking sys/timers.h presence... no checking for sys/timers.h... no checking sys/times.h usability... yes checking sys/times.h presence... yes checking for sys/times.h... yes checking sys/utsname.h usability... yes checking sys/utsname.h presence... yes checking for sys/utsname.h... yes checking sys/wait.h usability... yes checking sys/wait.h presence... yes checking for sys/wait.h... yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking time.h usability... yes checking time.h presence... yes checking for time.h... yes checking utime.h usability... yes checking utime.h presence... yes checking for utime.h... yes checking windows.h usability... no checking windows.h presence... no checking for windows.h... no checking winsock.h usability... no checking winsock.h presence... no checking for winsock.h... no checking sched.h usability... yes checking sched.h presence... yes checking for sched.h... yes checking for sys/cpuset.h... no checking whether time.h and sys/time.h may both be included... yes checking for long long... yes checking size of char... 1 checking size of double... 8 checking size of float... 4 checking size of int... 4 checking size of long... 8 checking size of long long... 8 checking size of short... 2 checking size of unsigned char... 1 checking size of unsigned int... 4 checking size of unsigned long... 8 checking size of unsigned long long... 8 checking size of unsigned short... 2 checking size of void *... 8 checking for char... yes checking alignment of char... 1 checking for double... yes checking alignment of double... 8 checking for float... yes checking alignment of float... 4 checking for int... yes checking alignment of int... 4 checking for long... yes checking alignment of long... 8 checking for long long... (cached) yes checking alignment of long long... 8 checking for short... yes checking alignment of short... 2 checking for unsigned char... yes checking alignment of unsigned char... 1 checking for unsigned int... yes checking alignment of unsigned int... 4 checking for unsigned long... yes checking alignment of unsigned long... 8 checking for unsigned long long... yes checking alignment of unsigned long long... 8 checking for unsigned short... yes checking alignment of unsigned short... 2 checking for void *... yes checking alignment of void *... 8 checking for WinExec... no checking for GetModuleFileName... no checking return type of signal handlers... void checking for getclock... no checking for getrusage... yes checking for gettimeofday... yes checking for setitimer... yes checking for siginterrupt... yes checking for sysconf... yes checking for times... yes checking for ctime_r... yes checking for sched_setaffinity... no checking for setlocale... yes checking whether ctime_r is declared... yes checking for closedir in -lmingwex... no checking for atan in -lm... yes checking for xmalloc in -liberty... no checking for bfd_uncompress_section_contents in -lbfd... no checking for dlopen in -ldl... yes checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking for pid_t... yes checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... cross configure: WARNING: result yes guessed because of cross compilation checking for working vfork... (cached) yes checking for an ANSI C-conforming const... yes checking whether byte ordering is bigendian... no checking whether float word order is big endian... no checking for nlist in -lelf... yes checking leading underscore in symbol names... no checking whether __attribute__((visibility("hidden"))) is supported... yes checking for clock_gettime in -lrt... yes checking for clock_gettime... yes checking for timer_settime... yes checking for timer_create... yes checking for printf$LDBLStub... no checking sys/eventfd.h usability... no checking sys/eventfd.h presence... yes configure: WARNING: sys/eventfd.h: present but cannot be compiled configure: WARNING: sys/eventfd.h: check for missing prerequisite headers? configure: WARNING: sys/eventfd.h: see the Autoconf documentation configure: WARNING: sys/eventfd.h: section "Present But Cannot Be Compiled" configure: WARNING: sys/eventfd.h: proceeding with the compiler's result configure: WARNING: ## ----------------------------------------------- ## configure: WARNING: ## Report this to glasgow-haskell-bugs(a)haskell.org ## configure: WARNING: ## ----------------------------------------------- ## checking for sys/eventfd.h... no checking for eventfd... no checking for PAPI_library_init in -lpapi... no checking papi.h usability... no checking papi.h presence... no checking for papi.h... no checking for __mingw_vfprintf... no configure: creating ./config.status config.status: creating mk/config.mk config.status: creating mk/install.mk config.status: creating mk/project.mk config.status: creating compiler/ghc.cabal config.status: creating ghc/ghc-bin.cabal config.status: creating utils/runghc/runghc.cabal config.status: creating settings config.status: creating docs/users_guide/ug-book.xml config.status: creating docs/users_guide/ug-ent.xml config.status: creating docs/index.html config.status: creating libraries/prologue.txt config.status: creating distrib/configure.ac config.status: creating mk/config.h config.status: mk/config.h is unchanged ---------------------------------------------------------------------- Configure completed successfully. Building GHC version : 7.7.20130924 Build platform : x86_64-unknown-linux Host platform : x86_64-unknown-linux Target platform : x86_64-sun-solaris2 Bootstrapping using : /usr/local/bin/ghc which is version : 7.6.3 Using gcc : /home/alain_odea/Documents/gcc/cross/x86_64 -sun-solaris2.11/bin/x86_64-sun-solaris2.11-gcc which is version : 4.7.3 Building a cross compiler : YES ld : /home/alain_odea/Documents/gcc/cross/x86_64-sun- solaris2.11/bin/x86_64-sun-solaris2.11-ld Happy : /home/alain_odea/.cabal/bin/happy (1.19.0) Alex : /home/alain_odea/.cabal/bin/alex (3.1.0) Perl : /usr/bin/perl dblatex : xsltproc : Using LLVM tools llc : opt : HsColour : /home/alain_odea/.cabal/bin/HsColour Building DocBook HTML documentation : NO Building DocBook PS documentation : NO Building DocBook PDF documentation : NO ---------------------------------------------------------------------- For a standard build of GHC (fully optimised with profiling), type (g)make. To make changes to the default build configuration, copy the file mk/build.mk.sample to mk/build.mk, and edit the settings in there. For more information on how to configure your GHC build, see http://hackage.haskell.org/trac/ghc/wiki/Building + test -f mk/config.mk.old + cmp -s mk/config.mk mk/config.mk.old touch -r mk/config.mk.old mk/config.mk + test -f mk/project.mk.old + cmp -s mk/project.mk mk/project.mk.old touch -r mk/project.mk.old mk/project.mk + test -f compiler/ghc.cabal.old + cmp -s compiler/ghc.cabal compiler/ghc.cabal.old touch -r compiler/ghc.cabal.old compiler/ghc.cabal ===--- building phase 0 make -r --no-print-directory -f ghc.mk phase=0 phase_0_builds utils/ghc-pkg/ghc.mk:46: warning: overriding commands for target `install_utils/ghc-pkg_dist_wrapper' utils/ghc-pkg/ghc.mk:37: warning: ignoring old commands for target `install_utils/ghc-pkg_dist_wrapper' "inplace/bin/ghc-cabal" configure ghc stage1 "" --with- ghc="/usr/local/bin/ghc" --with-ghc-pkg="/usr/local/bin/ghc-pkg" --flags=stage1 --constraint "ghc == 7.7" --package- db=/home/alain_odea/Documents/ghc/libraries/bootstrapping.conf --disable- library-for-ghci --disable-library-vanilla --disable-library-profiling --disable-shared --with-hscolour="/home/alain_odea/.cabal/bin/HsColour" --configure-option=CFLAGS=" -fno-stack-protector " --configure- option=LDFLAGS=" " --configure-option=CPPFLAGS=" " --configure- option=--host=x86_64-sun-solaris2 --constraint "Cabal == 1.18.1" --constraint "hpc == 0.6.0.1" --constraint "bin-package-db == 0.0.0.0" --constraint "hoopl == 3.10.0.0" --constraint "transformers == 0.3.0.0" --constraint "terminfo == 0.3.2.5" --with-gcc="/usr/bin/gcc" --configure- option=--with-cc="/usr/bin/gcc" --with-ar="/usr/bin/ar" --with- ranlib="ranlib" --with-alex="/home/alain_odea/.cabal/bin/alex" --with- happy="/home/alain_odea/.cabal/bin/happy" Configuring ghc-bin-7.7.20130924... Warning: 'data-dir: ..' is a relative path outside of the source tree. This will not work when generating a tarball with 'sdist'. utils/ghc-pkg/ghc.mk:46: warning: overriding commands for target `install_utils/ghc-pkg_dist_wrapper' utils/ghc-pkg/ghc.mk:37: warning: ignoring old commands for target `install_utils/ghc-pkg_dist_wrapper' make[1]: Nothing to be done for `phase_0_builds'. ===--- building phase 1 make -r --no-print-directory -f ghc.mk phase=1 phase_1_builds utils/ghc-pkg/ghc.mk:46: warning: overriding commands for target `install_utils/ghc-pkg_dist_wrapper' utils/ghc-pkg/ghc.mk:37: warning: ignoring old commands for target `install_utils/ghc-pkg_dist_wrapper' "cp" settings inplace/lib/settings "inplace/bin/ghc-cabal" check utils/runghc A 'license-file' is not specified. "inplace/bin/ghc-cabal" configure utils/runghc dist-install "" --with- ghc="/home/alain_odea/Documents/ghc/inplace/bin/ghc-stage1" --with-ghc- pkg="/home/alain_odea/Documents/ghc/inplace/bin/ghc-pkg" --disable- library-for-ghci --disable-library-vanilla --disable-library-profiling --disable-shared --with-hscolour="/home/alain_odea/.cabal/bin/HsColour" --configure-option=CFLAGS=" -fno-stack-protector " --configure- option=LDFLAGS=" " --configure-option=CPPFLAGS=" " --configure- option=--host=x86_64-sun-solaris2 --with- gcc="/home/alain_odea/Documents/gcc/cross/x86_64-sun- solaris2.11/bin/x86_64-sun-solaris2.11-gcc" --with- ld="/home/alain_odea/Documents/gcc/cross/x86_64-sun-solaris2.11/bin/x86_64 -sun-solaris2.11-ld" --configure-option=--with- cc="/home/alain_odea/Documents/gcc/cross/x86_64-sun-solaris2.11/bin/x86_64 -sun-solaris2.11-gcc" --with-ar="/usr/bin/ar" --with-ranlib="ranlib" --with-alex="/home/alain_odea/.cabal/bin/alex" --with- happy="/home/alain_odea/.cabal/bin/happy" Configuring runghc-7.7.20130924... ===--- building final phase make -r --no-print-directory -f ghc.mk phase=final all rts/ghc.mk:506: rts/dist/build/.depend-v-dyn-l-debug-thr-thr_debug-thr_l- debug_dyn-thr_dyn-thr_debug_dyn-l_dyn-thr_l_dyn.c_asm: No such file or directory libraries/ghc-prim/ghc.mk:4: libraries/ghc-prim/dist- install/build/.depend-v-dyn.haskell: No such file or directory libraries/ghc-prim/ghc.mk:4: libraries/ghc-prim/dist- install/build/.depend-v-dyn.c_asm: No such file or directory libraries/integer-gmp/ghc.mk:4: libraries/integer-gmp/dist- install/build/.depend-v-dyn.haskell: No such file or directory libraries/integer-gmp/ghc.mk:4: libraries/integer-gmp/dist- install/build/.depend-v-dyn.c_asm: No such file or directory utils/ghc-pkg/ghc.mk:46: warning: overriding commands for target `install_utils/ghc-pkg_dist_wrapper' utils/ghc-pkg/ghc.mk:37: warning: ignoring old commands for target `install_utils/ghc-pkg_dist_wrapper' "rm" -f libraries/integer- gmp/mkGmpDerivedConstants/dist/build/.depend.c_asm.tmp gcc -E -fno-stack-protector -Ilibraries/integer-gmp/gmp -Ilibraries/integer-gmp/mkGmpDerivedConstants/dist -MM -x c libraries /integer-gmp/mkGmpDerivedConstants/mkGmpDerivedConstants.c -MF libraries /integer-gmp/mkGmpDerivedConstants/dist/build/.depend.c_asm.bit sed -e 's|\\|/|g' -e 's| /$| \\|' -e "1s|\.o|\.dyn_o|" -e "1s|^|libraries /integer-gmp/mkGmpDerivedConstants/|" -e "1s|libraries/integer- gmp/mkGmpDerivedConstants/|libraries/integer- gmp/mkGmpDerivedConstants/dist/build/|" -e "1s|dist/build/dist/build|dist/build|g" -e "s|/home/alain_odea/Documents/ghc/||g" libraries/integer- gmp/mkGmpDerivedConstants/dist/build/.depend.c_asm.bit >> libraries /integer-gmp/mkGmpDerivedConstants/dist/build/.depend.c_asm.tmp && true "rm" -f libraries/integer- gmp/mkGmpDerivedConstants/dist/build/.depend.c_asm.bit echo "libraries/integer- gmp/mkGmpDerivedConstants_dist_depfile_c_asm_EXISTS = YES" >> libraries /integer-gmp/mkGmpDerivedConstants/dist/build/.depend.c_asm.tmp mv libraries/integer- gmp/mkGmpDerivedConstants/dist/build/.depend.c_asm.tmp libraries/integer- gmp/mkGmpDerivedConstants/dist/build/.depend.c_asm "/home/alain_odea/Documents/gcc/cross/x86_64-sun-solaris2.11/bin/x86_64 -sun-solaris2.11-gcc" -fno-stack-protector -Ilibraries /integer-gmp/gmp -Ilibraries/integer-gmp/mkGmpDerivedConstants/dist -c libraries/integer-gmp/mkGmpDerivedConstants/mkGmpDerivedConstants.c -o libraries/integer- gmp/mkGmpDerivedConstants/dist/build/mkGmpDerivedConstants.dyn_o "inplace/bin/ghc-stage1" -o libraries/integer- gmp/mkGmpDerivedConstants/dist/build/tmp/mkGmpDerivedConstants -hisuf dyn_hi -osuf dyn_o -hcsuf dyn_hc -fPIC -dynamic -H32m -O -i -ilibraries/integer-gmp/mkGmpDerivedConstants/. -ilibraries/integer- gmp/mkGmpDerivedConstants/dist/build -ilibraries/integer- gmp/mkGmpDerivedConstants/dist/build/autogen -Ilibraries/integer- gmp/mkGmpDerivedConstants/dist/build -Ilibraries/integer- gmp/mkGmpDerivedConstants/dist/build/autogen -no-user-package-db -rtsopts -odir libraries/integer-gmp/mkGmpDerivedConstants/dist/build -hidir libraries/integer-gmp/mkGmpDerivedConstants/dist/build -stubdir libraries/integer-gmp/mkGmpDerivedConstants/dist/build -fno-use-rpaths -optl-Wl,-z -optl-Wl,origin -no-auto-link-packages -no-hs-main libraries /integer-gmp/mkGmpDerivedConstants/dist/build/mkGmpDerivedConstants.dyn_o Warning: -rtsopts and -with-rtsopts have no effect with -no-hs-main. Call hs_init_ghc() from your main() function to set these options. "cp" -p libraries/integer- gmp/mkGmpDerivedConstants/dist/build/tmp/mkGmpDerivedConstants inplace/lib/bin/mkGmpDerivedConstants "rm" -f inplace/lib/mkGmpDerivedConstants echo '#!/bin/sh' >> inplace/lib/mkGmpDerivedConstants echo 'executablename="/home/alain_odea/Documents/ghc/inplace/lib/bin/mkGmpDerivedConstants"' >> inplace/lib/mkGmpDerivedConstants echo 'datadir="/home/alain_odea/Documents/ghc/inplace/lib"' >> inplace/lib/mkGmpDerivedConstants echo 'bindir="/home/alain_odea/Documents/ghc/inplace/bin"' >> inplace/lib/mkGmpDerivedConstants echo 'topdir="/home/alain_odea/Documents/ghc/inplace/lib"' >> inplace/lib/mkGmpDerivedConstants echo 'pgmgcc="/home/alain_odea/Documents/gcc/cross/x86_64-sun- solaris2.11/bin/x86_64-sun-solaris2.11-gcc"' >> inplace/lib/mkGmpDerivedConstants echo 'export LD_LIBRARY_PATH=":$LD_LIBRARY_PATH"' >> inplace/lib/mkGmpDerivedConstants echo 'exec "$executablename" ${1+"$@"}' >> inplace/lib/mkGmpDerivedConstants chmod +x inplace/lib/mkGmpDerivedConstants inplace/lib/mkGmpDerivedConstants > libraries/integer- gmp/mkGmpDerivedConstants/dist/GmpDerivedConstants.h inplace/lib/mkGmpDerivedConstants: 8: exec: /home/alain_odea/Documents/ghc/inplace/lib/bin/mkGmpDerivedConstants: not found make[1]: *** [libraries/integer- gmp/mkGmpDerivedConstants/dist/GmpDerivedConstants.h] Error 127 make[1]: *** Deleting file `libraries/integer- gmp/mkGmpDerivedConstants/dist/GmpDerivedConstants.h' make: *** [all] Error 2 ~/Documents }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8373> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 4

[GHC] #12461: Document -O3
by GHC 04 Apr '17

04 Apr '17

#12461: Document -O3 -------------------------------------+------------------------------------- Reporter: crockeea | Owner: Type: task | Status: new Priority: normal | Milestone: Component: Compiler | Version: 8.0.1 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: Documentation Unknown/Multiple | bug Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- GHC accepts the flag -O3, but I can't find any documentation on it. What does it do? -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/12461> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 4

[GHC] #9596: Create monoidal category framework for arrow desugarer
by GHC 04 Apr '17

04 Apr '17

#9596: Create monoidal category framework for arrow desugarer -------------------------------------+------------------------------------- Reporter: spacekitteh | Owner: Type: task | spacekitteh Priority: normal | Status: new Component: GHC API | Milestone: 7.10.1 Keywords: | Version: Architecture: Unknown/Multiple | Operating System: Difficulty: Project (more | Unknown/Multiple than a week) | Type of failure: Blocked By: | None/Unknown Related Tickets: | Test Case: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- I'm going to put it into a GHC namespace (GHC.Arrows.Experimental, perhaps) and put instances for Arrow and such in there as well. In a later ticket I'll work on the desugarer, converting erverything into SMC combinators rather than Arrow combinators. The basic design is [blog.spacekitteh.moe/posts/new-monoidal-cats.html here] -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9596> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 8

[GHC] #10976: Applicative Comprehensions
by GHC 02 Apr '17

02 Apr '17

#10976: Applicative Comprehensions -------------------------------------+------------------------------------- Reporter: davidar | Owner: Type: feature | Status: new request | Priority: normal | Milestone: 8.0.1 Component: Compiler | Version: Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: 8914 | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- As discussed on `ghc-devs`, when both the `MonadComprehensions` and `ApplicativeDo` language extensions are enabled, it should be possible to use comprehension-notation (in addition to do-notation) for `Applicative`s. This would allow, for example, an expression like {{{#!hs (\x y -> x + 2*y) <$> ZipList [1..10] <*> ZipList [10,20..100] }}} to also be written as {{{#!hs [ x + 2*y | x <- ZipList [1..10], y <- ZipList [10,20..100] ] }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10976> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 4