April 2017 - ghc-tickets

[GHC] #11514: Impredicativity is still sneaking in
by GHC 21 Mar '19

21 Mar '19

#11514: Impredicativity is still sneaking in -------------------------------------+------------------------------------- Reporter: goldfire | Owner: goldfire Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 8.1 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- This is erroneously accepted: {{{ {-# LANGUAGE RankNTypes #-} module Bug where foo :: forall a. (Show a => a -> a) -> () foo = undefined }}} `undefined` is being instantiated at `(Show a => a -> a) -> ()`, which requires impredicativity. GHC does the right thing (reject!) if we try to instantiate with a type involving proper foralls. I imagine this is a simple missing check. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11514> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 4

[GHC] #13101: Enable GHC to be loaded into GHCi
by GHC 18 Mar '19

18 Mar '19

#13101: Enable GHC to be loaded into GHCi -------------------------------------+------------------------------------- Reporter: bgamari | Owner: Type: task | Status: new Priority: normal | Milestone: Component: Compiler | Version: 8.0.1 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- It would be very helpful for development to be able to load GHC itself into GHCi. In principle this shouldn't be so hard since GHC is just another Haskell program. However, in practice there are a number of modules which use unboxed tuples, which the interpreter does not support. However, it should be possible to the convince GHC to use object code for just these modules and interpret the rest. I have a few attempts at this here (https://gist.github.com/bgamari/bd53e4fd6f3323599387ffc7b11d1a1e) See the following related mailing list threads, * https://mail.haskell.org/pipermail/ghc-devs/2017-January/013545.html * https://mail.haskell.org/pipermail/ghc-devs/2016-March/011555.html -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/13101> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 5

[GHC] #12770: Shrink list of RUNPATH entries for GHC libraries
by GHC 15 Mar '19

15 Mar '19

#12770: Shrink list of RUNPATH entries for GHC libraries -------------------------------------+------------------------------------- Reporter: slyfox | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 8.0.1 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- Recently Cabal/GHC acquired '''dynamic-library-dirs''' file tag support in ''' .conf''' files. Cabal-HEAD when used with GHC-HEAD puts all shared libraries into a single directory except the GHC itself (a fallout of https://github.com/haskell/cabal/issues/4046 ). In https://github.com/haskell/cabal/issues/4046#issuecomment-256603828 Christiaan explains our current sources of RUNPATH tags. Basically, current GHC dynamic library layout is still per-directory: {{{ /usr/lib64/ghc-8.1.20161026/Cabal-1.25.0.0/libHSCabal-1.25.0.0-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/array-0.5.1.1/libHSarray-0.5.1.1-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/base-4.9.0.0/libHSbase-4.9.0.0-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/binary-0.8.3.0/libHSbinary-0.8.3.0-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/bytestring-0.10.8.1/libHSbytestring-0.10.8.1-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/compact-1.0.0.0/libHScompact-1.0.0.0-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/containers-0.5.7.1/libHScontainers-0.5.7.1-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/deepseq-1.4.2.0/libHSdeepseq-1.4.2.0-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/directory-1.2.6.2/libHSdirectory-1.2.6.2-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/filepath-1.4.1.0/libHSfilepath-1.4.1.0-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/ghc-8.1/libHSghc-8.1-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/ghc-boot-8.1/libHSghc- boot-8.1-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/ghc-boot-th-8.1/libHSghc-boot- th-8.1-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/ghc-prim-0.5.0.0/libHSghc- prim-0.5.0.0-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/ghci-8.1/libHSghci-8.1-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/haskeline-0.7.2.3/libHShaskeline-0.7.2.3-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/hoopl-3.10.2.1/libHShoopl-3.10.2.1-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/hpc-0.6.0.3/libHShpc-0.6.0.3-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/integer-gmp-1.0.0.1/libHSinteger- gmp-1.0.0.1-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/pretty-1.1.3.3/libHSpretty-1.1.3.3-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/process-1.4.2.0/libHSprocess-1.4.2.0-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/rts/libHSrts-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/rts/libHSrts_debug-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/rts/libHSrts_l-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/rts/libHSrts_thr-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/rts/libHSrts_thr_debug-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/rts/libHSrts_thr_l-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/template-haskell-2.11.0.0/libHStemplate- haskell-2.11.0.0-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/terminfo-0.4.0.2/libHSterminfo-0.4.0.2-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/time-1.6.0.1/libHStime-1.6.0.1-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/transformers-0.5.2.0/libHStransformers-0.5.2.0-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/unix-2.7.2.0/libHSunix-2.7.2.0-ghc8.1.20161026.so /usr/lib64/ghc-8.1.20161026/xhtml-3000.2.1/libHSxhtml-3000.2.1-ghc8.1.20161026.so }}} Could we store them exactly as Cabal does? Namely {{{ dynamic-library-dirs: /usr/lib64/x86_64-linux-ghc-8.1.20161026 }}} Then for globally installed packages (how distributions usually build packages) we would have exactly one RUNPATH. Currently we have: {{{ $ readelf -a /usr/bin/read-idiii | grep RUNPATH 0x000000000000001d (RUNPATH) Library runpath: [/usr/lib64/ghc-8.1.20161026/array-0.5.1.1:/usr/lib64/ghc-8.1.20161026/base-4.9.0.0:/usr/lib64/ghc-8.1.20161026/binary-0.8.3.0:/usr/lib64/ghc-8.1.20161026/bytestring-0.10.8.1:/usr/lib64/ghc-8.1.20161026/containers-0.5.7.1:/usr/lib64/ghc-8.1.20161026/deepseq-1.4.2.0:/usr/lib64/ghc-8.1.20161026/directory-1.2.6.2:/usr/lib64/ghc-8.1.20161026/filepath-1.4.1.0:/usr/lib64/ghc-8.1.20161026 /ghc-prim-0.5.0.0:/usr/lib64/ghc-8.1.20161026/integer- gmp-1.0.0.1:/usr/lib64/ghc-8.1.20161026/process-1.4.2.0:/usr/lib64/ghc-8.1.20161026/rts:/usr/lib64/ghc-8.1.20161026/time-1.6.0.1:/usr/lib64/ghc-8.1.20161026/transformers-0.5.2.0:/usr/lib64/ghc-8.1.20161026/unix-2.7.2.0:/usr/lib64/x86_64 -linux-ghc-8.1.20161026] }}} And that could be just single {{{ /usr/lib64/x86_64-linux-ghc-8.1.20161026 }}} It's close to ticket #11587. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/12770> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 3

[GHC] #11371: Bogus in-scope set in substitutions
by GHC 12 Mar '19

12 Mar '19

#11371: Bogus in-scope set in substitutions -------------------------------------+------------------------------------- Reporter: simonpj | Owner: Type: bug | Status: new Priority: high | Milestone: 8.2.1 Component: Compiler | Version: 7.10.3 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- Bartosz [https://mail.haskell.org/pipermail/ghc- devs/2016-January/010892.html reports] that substitution isn't working properly for him. He cites this Note in `TyCoRep`: {{{ -- Note [Generating the in-scope set for a substitution] -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- If we want to substitute [a -> ty1, b -> ty2] I used to -- think it was enough to generate an in-scope set that includes -- fv(ty1,ty2). But that's not enough; we really should also take the -- free vars of the type we are substituting into! Example: -- (forall b. (a,b,x)) [a -> List b] -- Then if we use the in-scope set {b}, there is a danger we will rename -- the forall'd variable to 'x' by mistake, getting this: -- (forall x. (List b, x, x)) -- Urk! This means looking at all the calls to mkOpenTCvSubst.... }}} I think this is an outright bug that has been lurking for ages, and which Bartosz has just managed to tickle. Things to do: * We should add an ASSERT to substTy (and similar functions): **when calling `substTy subst ty` it should be the case that the in-scope set in the substitution is a superset of** * **The free vars of the range of the substitution** * **The free vars of ty minus the domain of the substitution** That ASSERT could be added to the immediate callers of `subst_ty` in `TyCoRep`. (Bartosz: if you add that you should find that it trips before the bug you are actually getting.) * How to fix it properly? The places to look are: everywhere that uses (transitively) one of the `mkOpenTCvSubst` or `zipOpenTCvSubst` functions. * Many calls to `mkOpenTCvSubst` produce a substitution that is only applied to closed types; or at least to types whose only free variables are the ones in the domain of the substitution. Example: the call to `zipOpenTCvSubst` in `DataCon.dataConInstSig`. These ones will all satisfy the ASSERT[[BR]][[BR]] * In other cases, we already have the in-scope set in hand. Example: in `CoreLint.lintTyApp` we find a call to `substTyWith`. But Lint carries an in-scope set, so it would be easy to pass it to `substTyWith`.[[BR]][[BR]] * Finally there may be cases where we really have to take the free vars of the type we are substituting into, and add them to the in-scope set. Doubtless all this applies to substituting in coercions too, and indeed into expressions. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11371> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 64

[GHC] #10069: CPR related performance issue
by GHC 09 Mar '19

09 Mar '19

#10069: CPR related performance issue -------------------------------------+------------------------------------- Reporter: pacak | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.10.1-rc2 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: Runtime Unknown/Multiple | performance bug Test Case: | Blocked By: Blocking: | Related Tickets: Differential Revisions: | -------------------------------------+------------------------------------- By default CRP analysis can be too aggressive in trying to pass as much as possible in unboxed tuples, in general it's not a problem but when one big datatype is passed to several consumers it might end up pushed to stack several times instead of once - to heap, things are getting worse when there are sufficient fields to cause stack overflow which otherwise is possible to avoid - in our codebase adding one field with ExistentialQuantification (unused, but that prevents ghc from doing CRP transformation) reduces number of stack overflow by a factor of 1000 and increases overall performance by 10%. In provided example performance for both A and B should be identical and yet B is consistently faster by 3-5% It's possible to increase this performance gap by adding more and more fields. I was able to replicate this issue in ghc 7.8.3 and 7.10,1rc2 {{{#!hs {-# LANGUAGE ExistentialQuantification #-} module Blah where import Criterion import Criterion.Main import Data.Typeable data A = A () !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int data B = forall rep. (Typeable rep) => B rep !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int !Int a :: A a = A () 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 b :: B b = B () 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 {-# NOINLINE a1 #-} a1 :: A -> Int a1 (A _ f1 f2 f3 f4 f5 f6 f7 f8 g1 g2 g3 g4 g5 g6 g7 g8 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _) = f1 {-# NOINLINE a2 #-} a2 :: A -> Int a2 (A _ f1 f2 f3 f4 f5 f6 f7 f8 g1 g2 g3 g4 g5 g6 g7 g8 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _) = f2 {-# NOINLINE a3 #-} a3 :: A -> Int a3 (A _ f1 f2 f3 f4 f5 f6 f7 f8 g1 g2 g3 g4 g5 g6 g7 g8 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _) = f3 {-# NOINLINE a4 #-} a4 :: A -> Int a4 (A _ f1 f2 f3 f4 f5 f6 f7 f8 g1 g2 g3 g4 g5 g6 g7 g8 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _) = f4 {-# NOINLINE b1 #-} b1 :: B -> Int b1 (B _ f1 f2 f3 f4 f5 f6 f7 f8 g1 g2 g3 g4 g5 g6 g7 g8 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _) = f1 {-# NOINLINE b2 #-} b2 :: B -> Int b2 (B _ f1 f2 f3 f4 f5 f6 f7 f8 g1 g2 g3 g4 g5 g6 g7 g8 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _) = f2 {-# NOINLINE b3 #-} b3 :: B -> Int b3 (B _ f1 f2 f3 f4 f5 f6 f7 f8 g1 g2 g3 g4 g5 g6 g7 g8 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _) = f3 {-# NOINLINE b4 #-} b4 :: B -> Int b4 (B _ f1 f2 f3 f4 f5 f6 f7 f8 g1 g2 g3 g4 g5 g6 g7 g8 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _) = f4 {-# NOINLINE fa #-} fa :: A -> Int fa a = a1 a + a2 a + a3 a + a4 a {-# NOINLINE fb #-} fb :: B -> Int fb b = b1 b + b2 b + b3 b + b4 b main :: IO () main = defaultMain [ bgroup "single call" [ bench "A" $ whnf fa a , bench "B" $ whnf fb b ] ] }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10069> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 39

[GHC] #11441: RFC: Inline intermediate languages (Core, STG, Cmm, even StrictCore)
by GHC 08 Mar '19

08 Mar '19

#11441: RFC: Inline intermediate languages (Core, STG, Cmm, even StrictCore) -------------------------------------+------------------------------------- Reporter: Iceland_jack | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.10.3 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- Allow intermediate code inline. == Inline ''Core'' == Typeable/WithTypeable: > {{{#!hs > withTypeable :: TTypeRep a -> (Typeable a => r) -> r > }}} > > Currently, `withTypeable` cannot be written in Haskell, but it is straightforward to write in Core. Can we fix this? [http://www.seas.upenn.edu/~sweirich/papers/wadlerfest2016.pdf A reflection on types] (''2016''): > We cannot implement ''withTypeable'' in Haskell source. But we ''can'' implement it in GHC's statically-typed intermediate language, System FC. The definition is simple, roughly like this: > > {{{#!hs > withTypeable tr k = k tr -- Not quite right > }}} > > Its second argument ''k'' expects a ''Typeable'' dictionary as its value argument. But since > a ''Typeable'' dictionary is represented by a ''TypeRep'', we can simply pass ''tr'' to ''k''. > When written in System FC there is a type-safe coercion to move from ''TypeRep a'' to ''Typeable a'', > but that coercion is erased at runtime. Since the definition can be statically type checked, > ''withTypeable'' does not form part of the trusted code base. == Inline ''Cmm'' == Edkward Kmett writes his own `.cmm` [https://github.com/ekmett/concurrent/blob/master/cbits/hashmap.cmm hither], [https://github.com/ekmett/concurrent/blob/master/cbits/array.cmm yon]. == Inline ''Strict Core'' == Should [http://research.microsoft.com/en-us/um/people/simonpj/papers /strict-core/tacc-hs09.pdf Types are calling conventions] (''2009'') be implemented: > === '''4.4 The ''`seq`'' function''' === > > A nice feature of Strict Core,,ANF,, is that it is possible to give a straightforward definition of the primitive ''seq'' function of Haskell: > {{{#!hs > seq : {a:* -> b:* -> {a} -> {b} -> b} > = { \a:*. \b:*. \x:{a}. \y:{b}. let _:a = x <> in y <> } > }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11441> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 9

[GHC] #11315: GHC doesn't restore split objects
by GHC 08 Mar '19

08 Mar '19

#11315: GHC doesn't restore split objects -------------------------------------+------------------------------------- Reporter: snowleopard | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.10.3 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- While working on the new Shake-based build system I came across an annoying problem related to missing split objects ([#note see note]). I still don't fully understand the reasons behind the problem, but I found that GHC doesn't restore missing split objects, as explained in the example below. I think this is a bug, but maybe this is actually a missing feature. I think it shouldn't be difficult to fix. {{{#!hs module Test (test) where test :: Int test = 0 }}} I compile the above with `ghc -split-objs Test.hs` and get two split object files in `Test_o_split`. Then if I delete any of these files, or even the whole folder, and rerun `ghc -split-objs Test.hs` the compiler doesn't bother to restore split objects, pretending that everything is up- to-date. However, if I delete `Test.o` all object files are restored. Another related issue reported by Neil Mitchell (which may be worth a separate ticket) is that even if we corrupt `Test.o` and rerun `ghc -split-objs Test.hs`, the compiler doesn't restore the object file (nor missing split objects) to the consistent state. ---- [=#note Note:] The problem I have is described here: https://github.com/snowleopard/shaking-up-ghc/issues/30. It's not necessary to follow the link to understand this ticket, however I'd appreciate any insight you might have about the reasons behind the problem and/or a possible solution. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11315> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 6

[GHC] #9832: Get rid of PERL dependency of `ghc-split`
by GHC 08 Mar '19

08 Mar '19

#9832: Get rid of PERL dependency of `ghc-split` -------------------------------------+------------------------------------- Reporter: hvr | Owner: Type: task | Status: new Priority: normal | Milestone: 7.12.1 Component: Compiler | Version: Keywords: | Operating System: Windows Architecture: Unknown/Multiple | Type of failure: Difficulty: Unknown | None/Unknown Blocked By: | Test Case: Related Tickets: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- (writeme) -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9832> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 37

[GHC] #8964: split_marker_entry assert breaks -split-objs and -ddump-opt-cmm
by GHC 08 Mar '19

08 Mar '19

#8964: split_marker_entry assert breaks -split-objs and -ddump-opt-cmm -------------------------------------+------------------------------------- Reporter: ezyang | Owner: Type: bug | Status: new Priority: lowest | Milestone: ⊥ Component: Compiler | Version: 7.9 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: Compile-time Difficulty: Easy (less than 1 | crash hour) | Test Case: Blocked By: | Blocking: Related Tickets: | -------------------------------------+------------------------------------- ...since the pretty-printer attempts to force the blocks list of the split_marker_entry proc. I'm not really sure what the right way to fix this is: just provide an empty block list, or hack the pretty-printer to treat split markers specially. But should be easy to fix. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8964> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 5

[GHC] #8685: -split-objs doesn't work for executables
by GHC 08 Mar '19

08 Mar '19

#8685: -split-objs doesn't work for executables ------------------------------------+------------------------------------- Reporter: refold | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Driver | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- While investigating [this bug report](https://github.com/haskell/cabal/issues/1611), I've noticed that the `-split-objs` option only works for libraries, but not for executables. That is, unlike in the case of libraries, the driver feeds only `A.o B.o ...` files to the linker instead of `A_split_0.o A_split_1.o ... B_split_0.o B_split_1.o ...`. It'd be nice if `-split-objs` could be changed to also work on executables. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8685> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 5