May 2017 - ghc-tickets

[GHC] #12953: Use computed gotos in the interpreter when the compiler supports it
by GHC 22 Jan '19

22 Jan '19

#12953: Use computed gotos in the interpreter when the compiler supports it -------------------------------------+------------------------------------- Reporter: dobenour | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Runtime | Version: 8.0.1 System | Keywords: interpreter | Operating System: Unknown/Multiple Architecture: | Type of failure: Runtime Unknown/Multiple | performance bug Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- We can use computed gotos to speed up the interpreter on systems that support them. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/12953> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 5

[GHC] #9251: ghc does not expose brancheless max/min operations as primops
by GHC 22 Jan '19

22 Jan '19

#9251: ghc does not expose brancheless max/min operations as primops ------------------------------------+------------------------------------- Reporter: carter | Owner: carter Type: task | Status: new Priority: normal | Milestone: 7.10.1 Component: Compiler | Version: 7.8.2 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: #9246 | ------------------------------------+------------------------------------- It was pointed out in #9246 that GHC currently does not expose primops for Max and Min on various unlifted types such as Float# and Double# and Int# and Word#, but that on most modern CPU architectures there is instruction level support for these operations. (Eg, Float# and #Double min and max can be provided on any 64bit x86 system pretty easily ) This ticket is to track doing that task. I'll probably do it one of the next two weekends to get back in the GHC hacking groove, or maybe this should be used as a "getting started" ticket for a new contributor? -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9251> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 23

[GHC] #13452: Lock .tix file
by GHC 19 Jan '19

19 Jan '19

#13452: Lock .tix file -------------------------------------+------------------------------------- Reporter: dfeuer | Owner: (none) Type: bug | Status: new Priority: normal | Milestone: 8.4.1 Component: Code Coverage | Version: 8.0.1 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- The HPC documentation [https://downloads.haskell.org/~ghc/latest/docs/html/users_guide/profiling.h… #caveats-and-shortcomings-of-haskell-program-coverage warns] that > HPC does not attempt to lock the `.tix` file, so multiple concurrently running binaries in the same directory will exhibit a race condition. This sounds like something that shouldn't be too terribly hard to fix, once we determine exactly how we want to deal with contention. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/13452> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 5

[GHC] #9279: Optimisation bug
by GHC 18 Jan '19

18 Jan '19

#9279: Optimisation bug ------------------------------+-------------------------------------------- Reporter: simonmar | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.2 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: Runtime performance bug Unknown/Multiple | Test Case: Difficulty: Unknown | Blocking: Blocked By: | Related Tickets: | ------------------------------+-------------------------------------------- I have a strange problem with a local function binding that is not being inlined. I've attached the repro code, build it like this: {{{ $ ghc -O2 Haxl/Core/Monad.hs }}} There are several modules, but the one with the problem is `Haxl/Core/Monad.hs`. In particular `Haxl.Core.Monad.$fApplicativeGenHaxl2`, which contains this fragment: {{{ let { $wa4_s6YQ $wa4_s6YQ = \ w_s6YF _ ww1_s6YM _ _ w1_s6YI -> case GHC.Prim.readMutVar# ipv7_X5Ne w1_s6YI of _ { (# ipv10_X5QO, ipv11_X5QQ #) -> case ipv11_X5QQ of _ { Haxl.Core.Monad.IVarFull a2_a3kK -> case lvl6_r7qi of wild3_00 { }; Haxl.Core.Monad.IVarEmpty dt2_d4Vs -> case GHC.Prim.writeMutVar# ipv7_X5Ne (Haxl.Core.Monad.IVarFull w_s6YF) ipv10_X5QO of s2#_a5OR { __DEFAULT -> case GHC.Prim.readMutVar# dt2_d4Vs s2#_a5OR of _ { (# ipv12_X5R0, ipv13_X5R2 #) -> case GHC.Prim.readMutVar# ww1_s6YM ipv12_X5R0 of _ { (# ipv14_X5SS, ipv15_X5SU #) -> letrec { go_a5ti go_a5ti = \ ds10_a5tj -> case ds10_a5tj of _ { [] -> ipv15_X5SU; : y_a5to ys_a5tp -> GHC.Types.: (y_a5to w_s6YF) (go_a5ti ys_a5tp) }; } in case go_a5ti ipv13_X5R2 of x'_a5P6 { __DEFAULT -> case GHC.Prim.writeMutVar# ww1_s6YM x'_a5P6 ipv14_X5SS of s2#1_a5P7 { __DEFAULT -> (# s2#1_a5P7, Haxl.Core.Monad.cacheRequest6 #) } } } } } } } } in let { a2_s6lH a2_s6lH = \ w_s6YF _ w2_s6YH w3_s6YI -> case w2_s6YH of _ { Haxl.Core.Monad.SchedState ww1_s6YL ww2_s6YM ww3_s6YN ww4_s6YO -> $wa4_s6YQ w_s6YF ww1_s6YL ww2_s6YM ww3_s6YN ww4_s6YO w3_s6YI } } in }}} I want `$wa4` to be inlined at its single occurrence in `a2`. I believe the reason it is not being inlined is that `a2` is a wrapper, but the situation seems silly because the wrapper isn't going away either, so we have a redundant closure being built (this is in my inner loop). -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9279> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 26

[GHC] #11126: Entered absent arg in a Repa program
by GHC 18 Jan '19

18 Jan '19

#11126: Entered absent arg in a Repa program -------------------------------------+------------------------------------- Reporter: tuplanolla | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.10.2 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: Incorrect result Unknown/Multiple | at runtime Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- Consider the following program. {{{#!hs module Main where import Data.Array.Repa data Stuff = !(Array U DIM1 Double) `With` !Double deriving Show through :: Maybe Double -> Stuff -> Stuff m `through` (a `With` _) = let b = a +^ (negate `smap` sumS (extend (Z :. All :. (1 :: Int)) a)) c = maybe b (const (negate `smap` a)) m in computeUnboxedS c `With` sumAllS b main :: IO () main = print $ Just 1 `through` (fromListUnboxed (Z :. 1) [1] `With` 1) }}} It should produce the following result once run. {{{#!hs AUnboxed (Z :. 1) (fromList [-1.0]) `With` 0.0 }}} However, when built using `repa-3.4.0.1` and compiled with the options `-O3 -Wall -funfolding-keeness-factor1000 -funfolding-use-threshold1000`, it crashes as follows. {{{#!hs Main: Oops! Entered absent arg arr2 Array D DIM1 Double }}} Adding `-fno-strictness` to the compiler options or removing strictness annotations from the code makes the problem disappear, so this looks like a strictness analyzer problem. The libraries used were * `QuickCheck-2.8.1`, * `array-0.5.1.0`, * `base-4.8.1.0`, * `bytestring-0.10.6.0`, * `containers-0.5.6.2`, * `deepseq-1.4.1.1`, * `ghc-prim-0.4.0.0`, * `integer-gmp-1.0.0.0`, * `pretty-1.1.2.0`, * `primitive-0.6`, * `random-1.1`, * `repa-3.4.0.1`, * `template-haskell-2.10.0.0`, * `tf-random-0.5`, * `time-1.5.0.1`, * `transformers-0.4.2.0` and * `vector-0.10.12.3`. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11126> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 23

[GHC] #10918: Float once-used let binding into a recursive function
by GHC 18 Jan '19

18 Jan '19

#10918: Float once-used let binding into a recursive function -------------------------------------+------------------------------------- Reporter: nomeata | Owner: Type: task | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.10.2 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | -------------------------------------+------------------------------------- Consider this code {{{#!hs let x = f x0 in let go 10 = x go i = go (i+1) in go (0::Int) }}} Currently, this is pretty much the core that comes out at the end. But what we want to see instead is {{{#!hs let go 10 = let x = f x 0 in x go i = go (i+1) in go (0::Int) }}} In general, we do not want to float a binding into a recursive function, because we would risk doing the allocation and/or evaluation of it multiple times. But in this case, we can see that it is going to be used at most once, so it is safe to do so. Even more: In the slightly less contrived examples that I was looking at, the call to `x` was happening in the a less likely code path, so this way we’d avoid doing the allocation in most cases, a clear win. It might be enough to simply make `CallArity` (or rather the cardinality analysis done by call arity) tell the rest of the compiler that it found that `x` is called at most once, and hopefully the simplifier knows what to make of that information. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10918> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 14

[GHC] #11301: Using GHC's parser and rendering the results is unreasonably difficult
by GHC 18 Jan '19

18 Jan '19

#11301: Using GHC's parser and rendering the results is unreasonably difficult -------------------------------------+------------------------------------- Reporter: bitemyapp | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: GHC API | Version: 7.10.2 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- After a couple hours, 30-some browser tabs, and attempting to use ghc- simple to paper over some annoyances with GHC's API (dynFlags/session- stuff, particularly), I gave up. I then opened up haskell-src-exts and found the function I wanted in a minute or two. {{{#!hs import qualified Language.Haskell.Exts.Parser as P parsePls' :: String -> IO () parsePls' s = print $ P.parseExp s }}} This is where I got stuck: {{{ Prelude> parsePls "1 + 1" Too late for parseStaticFlags: call it before runGhc or runGhcT }}} This is the code I was working with before I gave up on GHC: {{{#!hs module ParsePls where import DynFlags import FastString import qualified GHC import qualified GhcMonad as GM import HsSyn import Lexer import Outputable import Parser import RdrName import SrcLoc import StaticFlags import StringBuffer import qualified Language.Haskell.GHC.Simple as S import qualified Language.Haskell.GHC.Simple.Types as ST import System.Environment main :: IO () main = do [expr] <- getArgs parsePls expr parsePls :: String -> IO () parsePls s = do initStaticOpts let sbuf = stringToStringBuffer s srcloc = mkRealSrcLoc (mkFastString s) 1 1 (dynflags, _) <- S.getDynFlagsForConfig ST.defaultConfig -- dynflags <- undefined -- GHC.getSessionDynFlags -- unP :: P a -> PState -> ParseResult a -- mkPState :: DynFlags -> StringBuffer -> RealSrcLoc -> PState -- parseExpression :: P (LHsExpr RdrName) -- type LHsExpr id = Located (HsExpr id) -- Defined in ‘HsExpr’ let parseResult = unP parseExpression (mkPState dynflags sbuf srcloc) case parseResult of POk _ (L _ mdl) -> print $ showPpr dynflags mdl PFailed ss _ -> do putStrLn "Error occurred!" print ss }}} Is there a reason it has to be this difficult? -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11301> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 7

[GHC] #11606: name shadowing warnings don't trigger on standalone declarations in ghci
by GHC 17 Jan '19

17 Jan '19

#11606: name shadowing warnings don't trigger on standalone declarations in ghci -------------------------------------+------------------------------------- Reporter: rwbarton | Owner: Type: bug | Status: new Priority: high | Milestone: 8.0.1 Component: GHCi | Version: 7.10.3 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- The name shadowing warnings in ghci catch shadowing from top-level binds and `let` statements, but not from standalone declarations (new in 8.0). {{{ rwbarton@morphism:/tmp$ ~/ghc-HEAD/bin/ghci -fwarn-name-shadowing GHCi, version 8.1.20160212: http://www.haskell.org/ghc/ :? for help Prelude> a <- return () Prelude> a <- return () <interactive>:2:1: warning: This binding for ‘a’ shadows the existing binding defined at <interactive>:1:1 Prelude> let b = return () Prelude> let b = return () <interactive>:4:5: warning: This binding for ‘b’ shadows the existing binding defined at <interactive>:3:5 Prelude> c = return () Prelude> c = return () Prelude> }}} I'm hoping this can be fixed for 8.0, since I would also very much like to turn on name shadowing warnings in ghci by default (in the interactive flags), to reduce confusion from examples like the below, which is now possible for the first time in 8.0: {{{ Prelude> fact 0 = 1 Prelude> fact n = n * fact (n-1) Prelude> fact 5 ^C^CInterrupted. Prelude> -- why did it run forever? }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11606> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 14

[GHC] #12091: 'Variable not in scope" when using GHCi with `-fobject-code`
by GHC 17 Jan '19

17 Jan '19

#12091: 'Variable not in scope" when using GHCi with `-fobject-code` -------------------------------------+------------------------------------- Reporter: thomie | Owner: Type: bug | Status: new Priority: high | Milestone: Component: GHCi | Version: 8.0.1 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: #7253 Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- Since b98ff3ccb14e36145404f075349c8689762a2913 was landed (#7253), you don't need `let` to define stuff in GHCi: {{{ $ ghci Prelude> x = 3 Prelude> x 3 }}} But when using `-fobject-code`, this results in an error: {{{ $ ghci -fobject-code Prelude> x = 3 Prelude> x <interactive>:2:1: error: Variable not in scope: x }}} Very strange. CC @roshats, who implemented this feature, but the bug is probably in some part of the code he didn't touch. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/12091> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 9

[GHC] #13191: Make liftA2 a method of Applicative
by GHC 16 Jan '19

16 Jan '19

#13191: Make liftA2 a method of Applicative -------------------------------------+------------------------------------- Reporter: dfeuer | Owner: dfeuer Type: feature | Status: new request | Priority: normal | Milestone: 8.2.1 Component: Core | Version: 8.0.1 Libraries | Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): Phab:D3031 | Wiki Page: -------------------------------------+------------------------------------- Some functors support implementations of `liftA2` that are considerably faster than the usual definition. Furthermore, some people see `liftA2` as more intuitive and fundamental to the idea of `Applicative` than `<*>` is. This has been discussed on the libraries list in https://mail.haskell.org/pipermail/libraries/2017-January/027579.html and (as an official proposal) in https://mail.haskell.org/pipermail/libraries/2017-January/027612.html. All who expressed an opinion favored the proposal. One (David Menendez) specified that his support was weak. The others (Conal Elliot, Kris Nuttycombe, Wren Romano, Bardur Arantsson, and Mario Blažević) either supported the proposal strongly or merely indicated they were "+1". Conal Elliot wrote: [[BR]] [[BR]] > +1. > > I also sometimes define a specialized `liftA2` and then use it to define > `(<*>)`, which then gets used to define the real `liftA2`. > > I think of `liftA2` as playing a role similar to `foldMap` and `traverse`, while > `(<*>)` corresponds to `fold` and `sequenceA`. The first three self- compose > nicely: `liftA2.liftA2.liftA2`, `foldMap.foldMap.foldMap`, and > `traverse.traverse.traverse`. With functor composition, it's so much nicer to > write `liftA2.liftA2` (in the style of `Functor`, `Foldable`, and `Traversable`) > rather than `liftA2 (<*>)`. [[BR]] Wren Romano wrote [[BR]] [[BR]] > I'm also all for adding liftA2 to the class and have noticed this > inefficiency/asymmetry when working on the class hierarchies for other > languages [[BR]] Kris NuttyCombe wrote [[BR]] [[BR]] > I'm in favor of this change. From my perspecive, liftA2 is actually the > fundamental Applicative operation, an <*> is merely a convenient > isomorphism. When I'm teaching, showing the symmetry between the following > always seems to help students: > > fmap :: (a -> b) -> f a -> f b > liftA2 :: (a -> b -> c) -> f a -> f b -> f c > flip (>>=) :: (a -> f b) -> f a -> f b > > <*> is obviously exceptionally useful in practice. But liftA2 seems like the > more essential shape of that operation. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/13191> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 2