April 2018 - ghc-tickets

[GHC] #14830: Use test instead of cmp for comparison against zero.
by GHC 20 Oct '18

20 Oct '18

#14830: Use test instead of cmp for comparison against zero. -------------------------------------+------------------------------------- Reporter: AndreasK | Owner: (none) Type: task | Status: new Priority: low | Milestone: Component: Compiler | Version: (NCG) | Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- For comparisons `test r, r` and `cmp r, $0` are interchangeable at least on x86. However using test leads to slightly smaller code. (Saves a byte per comparison). A good starting point is stmtToInstrs in compiler/nativeGen/X86/CodeGen starting with how CmmCondBranch is compiled to Instructions. From there it should be not too hard to track down the required changes. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/14830> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 3

[GHC] #11307: Regresssion: parsing type operators
by GHC 17 Oct '18

17 Oct '18

#11307: Regresssion: parsing type operators -------------------------------------+------------------------------------- Reporter: alanz | Owner: Type: bug | Status: new Priority: normal | Milestone: 8.0.1 Component: Compiler | Version: 7.11 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- GHC 7.10.3 will parse (but not type-check) the following {{{#!hs {-# LANGUAGE TypeOperators #-} type family (r1 :++: r2); infixr 5 :++: type instance r :++: Nil = r type instance r1 :++: r2 :> a = (r1 :++: r2) :> a }}} Current master (c7830bdb14e0a85a78617314156d101155fdf7aa) fails with {{{#!hs /tmp/Foo.hs:5:15: error: Malformed head of type or class declaration: r1 :++: r2 :> a }}} @simonpj comment on ghc-devs mailing list > `| type instance r1 :++: r2 :> a = (r1 :++: r2) :> a` > > What do you expect this to mean? I suppose you could hope that GHC will > unravel the fixity of :++: and :>, to determine whether you are giving an > instance for :++: or for :>? > > That sounds reasonable, but it's not trivial. > > Currently the LHS of a 'type instance' decl is ultimately a TyFamEqn, and > it looks like this: > > {{{#!hs > data TyFamEqn name pats > = TyFamEqn > { tfe_tycon :: Located name > , tfe_pats :: pats > , tfe_rhs :: LHsType name } > }}} > > So we've already decided (in the parser) what the type-function name is. > But we can't do that in this case, because the parser doesn't understand > fixity. > > To deal with this we'd need to change to > > {{{#!hs > data TyFamEqn name pats > = TyFamEqn > { tfe_lhs :: LHSType name > , tfe_rhs :: LHsType name } > }}} > > so that the LHS was just a type. Now the renamer can re-jiggle its > fixities in the usual way, and only in the type checker will we need to > decide exactly which type it's an instance of. Easy! > > This might be a good change to make! It's a bit like in ClsInstDecl, you'll > see that the instance cid_poly_ty is just a LHsSigType, i.e. not decomposed > into which class it is. > -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11307> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 6

[GHC] #13600: surprising error message with bang pattern
by GHC 15 Oct '18

15 Oct '18

#13600: surprising error message with bang pattern -------------------------------------+------------------------------------- Reporter: andrewufrank | Owner: (none) Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 8.0.2 Keywords: | Operating System: Linux Architecture: x86_64 | Type of failure: Poor/confusing (amd64) | error message Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- the following code {{{ f3 :: [Int] -> IO Int f3 x = return (sum x) f4 :: [Int] -> IO Int f4 !x = return (sum x) }}} gives `The type signature for ‘f4’ lacks an accompanying binding` for the second function (the two functions are exactly the same except for the added bang). I do not understand bang patterns well, but would expect a more instructive error message. without the type definition, the second function f4 compiles with the bang). -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/13600> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 20

[GHC] #12430: TypeFamilyDependencies accepts invalid injectivity annotation
by GHC 15 Oct '18

15 Oct '18

#12430: TypeFamilyDependencies accepts invalid injectivity annotation -------------------------------------+------------------------------------- Reporter: vagarenko | Owner: Type: bug | Status: new Priority: high | Milestone: Component: Compiler | Version: 8.0.1 (Type checker) | Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: GHC accepts Unknown/Multiple | invalid program Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- Consider this code (depends on singletons-2.2): {{{#!hs {-# LANGUAGE TypeFamilies, DataKinds, PolyKinds, TypeOperators, KindSignatures, TypeInType, TypeFamilyDependencies, UndecidableInstances #-} module Bug where import Data.Kind (Type) import Data.Singletons.Prelude (Map, SndSym0) import GHC.TypeLits (Nat) data Payload = A | B newtype NewType a = NewType Int type NatList = [(Nat, Payload)] type StripNatList (natList :: NatList) = Map SndSym0 natList type family Family (natList :: NatList) = (r :: Type) | r -> natList where Family '[] = () Family xs = NewType (StripNatList xs) }}} Why GHC is okay with injectivity annotation for `Family`: `r -> natList`? These two types: {{{#!hs type Foo = Family '[ '(0, 'A), '(1, 'B)] type Bar = Family '[ '(0, 'A), '(0, 'B)] }}} are obviously map to the same type: {{{#!hs *Bug Data.Singletons.Prelude> :kind! Foo Foo :: * = NewType ('A :$$$ '['B]) *Bug Data.Singletons.Prelude> :kind! Bar Bar :: * = NewType ('A :$$$ '['B]) }}} ---- If inline `StripNatList` inside `Family` definition: {{{#!hs type family Family (natList :: NatList) = (r :: Type) | r -> natList where Family '[] = () Family xs = NewType (Map SndSym0 xs) }}} or change `StripNatList` definition to type family: {{{#!hs type family StripNatList (natList :: NatList) where StripNatList '[] = '[] StripNatList ('(n, x) ': xs) = x ': StripNatList xs }}} compilation expectedly fails with `Type family equation violates injectivity annotation.` ---- Moreover, if I remove `NewType` from `Family` and change result kind: {{{#!hs type family Family (natList :: NatList) = (r :: [Payload]) | r -> natList where Family xs = StripNatList xs }}} it fails with correct error regardless of `StripNatList` definition. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/12430> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 6

[GHC] #14341: Show instance for TypeReps is a bit broken
by GHC 15 Oct '18

15 Oct '18

#14341: Show instance for TypeReps is a bit broken -------------------------------------+------------------------------------- Reporter: dfeuer | Owner: (none) Type: bug | Status: new Priority: normal | Milestone: Component: Core | Version: 8.2.1 Libraries | Keywords: Typeable | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): Phab:D4084 | Wiki Page: -------------------------------------+------------------------------------- There are two problems. 1. Showing typereps of tuples can produce unnecessary parentheses: {{{ Prelude K T> typeRep @(Int, Maybe Bool) (Int,(Maybe Bool)) }}} The fix is trivial. 2. Showing typereps of ticked (i.e., lifted) tuples and lists gives hard- to-read results, because it does not use the usual special syntax: {{{ Prelude K T> typeRep @'(Int, Maybe Bool) '(,) * * Int (Maybe Bool) Prelude K T> typeRep @'[1,2,3] ': Nat 1 (': Nat 2 (': Nat 3 ('[] Nat))) }}} Fixing the lifted tuple case is trivial. Fixing the lifted list case is slightly less trivial, but not hard. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/14341> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 6

[GHC] #14088: Allow users to omit`forall`
by GHC 15 Oct '18

15 Oct '18

#14088: Allow users to omit`forall` -------------------------------------+------------------------------------- Reporter: Iceland_jack | Owner: (none) Type: feature | Status: new request | Priority: normal | Milestone: Component: Compiler | Version: 8.2.1 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- Just an idea I wanted to get out there, I don't think it causes parsing ambiguity {{{#!hs -- id :: forall a. a -> a id :: a. a -> a -- everywhere :: (forall b. Term b => b -> b) -> (forall a. Term a => a -> a) everywhere :: (b. Term b => b -> b) -> (a. Term a => a -> a) }}} I think it looks beautiful but clearly more difficult to Google or grep for. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/14088> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 5

[GHC] #12005: Constraint instances not shown in `:info`
by GHC 13 Oct '18

13 Oct '18

#12005: Constraint instances not shown in `:info` -------------------------------------+------------------------------------- Reporter: Iceland_jack | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.10.3 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- {{{ $ ghci -ignore-dot-ghci -XKindSignatures -XRank2Types -XConstraintKinds -XAllowAmbiguousTypes -XInstanceSigs GHCi, version 8.1.20160428: http://www.haskell.org/ghc/ :? for help Prelude> import Data.Kind Prelude Data.Kind> class Defer (p :: Constraint) where defer :: (p => r) -> r Prelude Data.Kind> instance Defer () where defer :: r -> r; defer = id Prelude Data.Kind> :i Defer class Defer (p :: Constraint) where defer :: (p => r) -> r {-# MINIMAL defer #-} -- Defined at <interactive>:2:1 }}} Same happens with the [https://github.com/ekmett/constraints/blob/master/src/Data/Constraint/Defer… Data.Constraint.Deferrable] which defines: {{{#!hs instance (Typeable a, Typeable b) => Deferrable (a ~ b) instance (Deferrable a, Deferrable b) => Deferrable (a, b) instance (Deferrable a, Deferrable b, Deferrable c) => Deferrable (a, b, c) }}} but no instances are shown: {{{ ghci> import Data.Constraint.Deferrable ghci> :i Deferrable class Deferrable (p :: Constraint) where deferEither :: proxy p -> (p => r) -> Either String r {-# MINIMAL deferEither #-} -- Defined in ‘Data.Constraint.Deferrable’ }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/12005> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 6

[GHC] #15053: Compiler panic on invalid syntax (unterminated pragma)
by GHC 13 Oct '18

13 Oct '18

#15053: Compiler panic on invalid syntax (unterminated pragma) -------------------------------------+------------------------------------- Reporter: AndreasK | Owner: (none) Type: bug | Status: new Priority: normal | Milestone: 8.6.1 Component: Compiler | Version: 8.2.2 (Parser) | Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: Compile-time Unknown/Multiple | crash or panic Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- The following minimal example causes a compiler panic. {{{ {-# OPTIONS_GHC -O1 } " #-} }}} {{{ ghc-stage2.exe: panic! (the 'impossible' happened) (GHC version 8.5.20180413 for x86_64-unknown-mingw32): getOptions'.parseToks: Couldn't read "\r\n\"\r\n " as String Please report this as a GHC bug: http://www.haskell.org/ghc/reportabug }}} Happens in HEAD and 8.2.2 at least. Double quotes seem to confuse the parser. Also panics if there are two doublequotes. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/15053> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 8

[GHC] #14907: Error message: (%, %) shows up when with accidental paren
by GHC 13 Oct '18

13 Oct '18

#14907: Error message: (%,%) shows up when with accidental paren -------------------------------------+------------------------------------- Reporter: Iceland_jack | Owner: (none) Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 8.5 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: Poor/confusing Unknown/Multiple | error message Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: -------------------------------------+------------------------------------- I accidentally wrote an extra closing parens in instance declaration {{{#!hs $ ghci -ignore-dot-ghci -XRankNTypes GHCi, version 8.2.1: http://www.haskell.org/ghc/ :? for help Prelude> class (Category (Src f), forall xx. xx => Eq xx)) => Functor f <interactive>:1:8: error: Unexpected type ‘Category (Src f)’ In the class declaration for ‘GHC.Classes.(%,%)’ A class declaration should have form class GHC.Classes.(%,%) a b where ... Prelude> }}} `(%,%)` shouldn't show up here, same happens on 8.5.20180105 -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/14907> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 6

[GHC] #8763: forM_ [1..N] does not get fused (10 times slower than go function)
by GHC 13 Oct '18

13 Oct '18

#8763: forM_ [1..N] does not get fused (10 times slower than go function) ------------------------------+-------------------------------------------- Reporter: nh2 | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: Runtime performance bug Unknown/Multiple | Test Case: Difficulty: Unknown | Blocking: Blocked By: | Related Tickets: | ------------------------------+-------------------------------------------- Apparently idiomatic code like {{{forM_ [1.._N]}}} does not get fused away. This can give serious performance problems when unnoticed. {{{ -- Slow: forM_ [0.._N-1] $ \i -> do ... -- Around 10 times faster: loop _N $ \i -> do ... {-# INLINE loop #-} loop :: (Monad m) => Int -> (Int -> m ()) -> m () loop bex f = go 0 where go !n | n == bex = return () | otherwise = f n >> go (n+1) }}} Full code example: https://gist.github.com/nh2/8905997 - the relevant alternatives are commented. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8763> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 86