Getting segmentation fault on stack/cabal -any command, including stack --install-ghc, On windows.

Michael McCulloch

20 Oct 2017 20 Oct '17

10:02 a.m.

Hello. After searching around I can't find people with a similar issue (Maybe I'm looking in the wrong places?). I installed Haskell platform 8.2.1, using Stack 1.5.1, Cabal 2.0.0.0. Windows 10 Fall Creators Update( This issue was also occurring pre FCU). The issue also occurs with 8.0.2a Prior to FCU, I could run ghci directly, but now i get: Access violation in generated code when reading 00000000046710f6 Can anyone help me out? -- Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com

Attachments:

attachment.html (text/html — 1.3 KB)

Show replies by date

Tamar Christina

20 Oct 20 Oct

6:08 p.m.

Hi Michael, Does this happen only with 8.2.1? Can you try a clean vanilla GHC? https://downloads.haskell.org/~ghc/8.2.1/ghc-8.2.1-x86_64-unknown-mingw32.ta... just to rule out any issues with toolings. if it still happens, does ghci -v3 show anything? if it still crashes can you run procdump on GHC directly and return the dump? https://docs.microsoft.com/en-us/sysinternals/downloads/procdump with "procdump -e 1 -x <pathtobinfolder>\ghc --interactive" Thanks, Tamar ---- On Fri, 20 Oct 2017 14:02:31 +0000 Michael McCulloch wrote ----

...

Hello. After searching around I can't find people with a similar issue (Maybe I'm looking in the wrong places?). I installed Haskell platform 8.2.1, using Stack 1.5.1, Cabal 2.0.0.0. Windows 10 Fall Creators Update( This issue was also occurring pre FCU). The issue also occurs with 8.0.2a Prior to FCU, I could run ghci directly, but now i get: Access violation in generated code when reading 00000000046710f6 Can anyone help me out?-- Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com _______________________________________________ Glasgow-haskell-users mailing list Glasgow-haskell-users@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/glasgow-haskell-users

Michael McCulloch

7:51 p.m.

Previously to FCU, the issue was also occuring with ghc8.0.2(a), however, it would appear that it is working again. I have provided the output of ghci -v3 *8.2.1). I was unable to run procdump, it was giving me directory does not exist, even when placed in the bin folder. On Fri, Oct 20, 2017 at 4:08 PM Tamar Christina wrote:

...

Hi Michael,

Does this happen only with 8.2.1?

Can you try a clean vanilla GHC?

https://downloads.haskell.org/~ghc/8.2.1/ghc-8.2.1-x86_64-unknown-mingw32.ta...

just to rule out any issues with toolings.

if it still happens, does ghci -v3 show anything?

if it still crashes can you run procdump on GHC directly and return the dump?

https://docs.microsoft.com/en-us/sysinternals/downloads/procdump

with "procdump -e 1 -x <pathtobinfolder>\ghc --interactive"

Thanks, Tamar

---- On Fri, 20 Oct 2017 14:02:31 +0000 Michael McCulloch < michael.james.mcculloch@gmail.com> wrote ----

...
Hello. After searching around I can't find people with a similar issue (Maybe I'm looking in the wrong places?). I installed Haskell platform 8.2.1, using Stack 1.5.1, Cabal 2.0.0.0. Windows 10 Fall Creators Update( This issue was also occurring pre FCU). The issue also occurs with 8.0.2a Prior to FCU, I could run ghci directly, but now i get: Access violation in generated code when reading 00000000046710f6 Can anyone help me out?-- Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com _______________________________________________ Glasgow-haskell-users mailing list Glasgow-haskell-users@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/glasgow-haskell-users

--

Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com

Tamar Christina

10:54 p.m.

---- On Fri, 20 Oct 2017 23:51:43 +0000 Michael McCulloch wrote ----

...

Previously to FCU, the issue was also occuring with ghc8.0.2(a), however, it would appear that it is working again. I have provided the output of ghci -v3 *8.2.1).

Thanks, this is quite early on, does <ghc folder>\mingw\bin\gcc --version work?

...

I was unable to run procdump, it was giving me directory does not exist, even when placed in the bin folder.

Hmm that's odd, and you're running this from a normal cmd prompt? a dump would really be helpful here.

...

On Fri, Oct 20, 2017 at 4:08 PM Tamar Christina wrote: -- Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com Hi Michael,

Does this happen only with 8.2.1?

Can you try a clean vanilla GHC? https://downloads.haskell.org/~ghc/8.2.1/ghc-8.2.1-x86_64-unknown-mingw32.ta...

just to rule out any issues with toolings.

if it still happens, does ghci -v3 show anything?

if it still crashes can you run procdump on GHC directly and return the dump?

https://docs.microsoft.com/en-us/sysinternals/downloads/procdump

with "procdump -e 1 -x <pathtobinfolder>\ghc --interactive"

Thanks, Tamar

---- On Fri, 20 Oct 2017 14:02:31 +0000 Michael McCulloch wrote ----

...
Hello. After searching around I can't find people with a similar issue (Maybe I'm looking in the wrong places?). I installed Haskell platform 8.2.1, using Stack 1.5.1, Cabal 2.0.0.0. Windows 10 Fall Creators Update( This issue was also occurring pre FCU). The issue also occurs with 8.0.2a Prior to FCU, I could run ghci directly, but now i get: Access violation in generated code when reading 00000000046710f6 Can anyone help me out?-- Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com _______________________________________________ Glasgow-haskell-users mailing list Glasgow-haskell-users@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/glasgow-haskell-users

Tamar Christina

21 Oct 21 Oct

3:54 p.m.

Hi, Could you try https://1drv.ms/u/s!AuQz_u-9HaJPmcQRFveWa9dMBi77hg ? If you can still reproduce this issue with this build start with +RTS --generate-crash-dumps and send the dump it creates. Note that this is a pre-release version of GHC 8.4 so some packages may not compile without updating version bounds. Tamar ---- On Sat, 21 Oct 2017 02:54:49 +0000 Tamar Christina wrote ----

...

---- On Fri, 20 Oct 2017 23:51:43 +0000 Michael McCulloch wrote ----

...
Previously to FCU, the issue was also occuring with ghc8.0.2(a), however, it would appear that it is working again. I have provided the output of ghci -v3 *8.2.1).

Thanks, this is quite early on, does <ghc folder>\mingw\bin\gcc --version work?

...
I was unable to run procdump, it was giving me directory does not exist, even when placed in the bin folder.

Hmm that's odd, and you're running this from a normal cmd prompt? a dump would really be helpful here.

...
On Fri, Oct 20, 2017 at 4:08 PM Tamar Christina wrote: -- Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com Hi Michael,

Does this happen only with 8.2.1?

Can you try a clean vanilla GHC? https://downloads.haskell.org/~ghc/8.2.1/ghc-8.2.1-x86_64-unknown-mingw32.ta...

just to rule out any issues with toolings.

if it still happens, does ghci -v3 show anything?

if it still crashes can you run procdump on GHC directly and return the dump?

https://docs.microsoft.com/en-us/sysinternals/downloads/procdump

with "procdump -e 1 -x <pathtobinfolder>\ghc --interactive"

Thanks, Tamar

---- On Fri, 20 Oct 2017 14:02:31 +0000 Michael McCulloch wrote ----

...
Hello. After searching around I can't find people with a similar issue (Maybe I'm looking in the wrong places?). I installed Haskell platform 8.2.1, using Stack 1.5.1, Cabal 2.0.0.0. Windows 10 Fall Creators Update( This issue was also occurring pre FCU). The issue also occurs with 8.0.2a Prior to FCU, I could run ghci directly, but now i get: Access violation in generated code when reading 00000000046710f6 Can anyone help me out?-- Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com _______________________________________________ Glasgow-haskell-users mailing list Glasgow-haskell-users@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/glasgow-haskell-users

_______________________________________________ Glasgow-haskell-users mailing list Glasgow-haskell-users@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/glasgow-haskell-users

Michael McCulloch

4:05 p.m.

Hi, \ghc-8.2.1\mingw\bin\gcc --version produced no errors. the ghc 8.4 release you sent produced no errors as well. I have included the procdump output as well, in case it helps, same error mentioned before. On Sat, Oct 21, 2017 at 1:54 PM Tamar Christina wrote:

...

Hi,

Could you try https://1drv.ms/u/s!AuQz_u-9HaJPmcQRFveWa9dMBi77hg ?

If you can still reproduce this issue with this build start with +RTS --generate-crash-dumps

and send the dump it creates. Note that this is a pre-release version of GHC 8.4 so some packages may not compile without updating version bounds.

Tamar

---- On Sat, 21 Oct 2017 02:54:49 +0000 Tamar Christina wrote ----

...
---- On Fri, 20 Oct 2017 23:51:43 +0000 Michael McCulloch <

...
...
Previously to FCU, the issue was also occuring with ghc8.0.2(a), however, it would appear that it is working again. I have provided the output of ghci -v3 *8.2.1).

Thanks, this is quite early on, does <ghc folder>\mingw\bin\gcc --version work?

...
I was unable to run procdump, it was giving me directory does not exist, even when placed in the bin folder.

Hmm that's odd, and you're running this from a normal cmd prompt? a dump would really be helpful here.

...
On Fri, Oct 20, 2017 at 4:08 PM Tamar Christina

wrote:

...
-- Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com Hi Michael,

Does this happen only with 8.2.1?

Can you try a clean vanilla GHC?

https://downloads.haskell.org/~ghc/8.2.1/ghc-8.2.1-x86_64-unknown-mingw32.ta...

...
just to rule out any issues with toolings.

if it still happens, does ghci -v3 show anything?

if it still crashes can you run procdump on GHC directly and return

michael.james.mcculloch@gmail.com> wrote ---- the dump?

...
...
https://docs.microsoft.com/en-us/sysinternals/downloads/procdump

with "procdump -e 1 -x <pathtobinfolder>\ghc --interactive"

Thanks, Tamar

---- On Fri, 20 Oct 2017 14:02:31 +0000 Michael McCulloch <

michael.james.mcculloch@gmail.com> wrote ----

...
...
Hello. After searching around I can't find people with a similar issue (Maybe I'm looking in the wrong places?). I installed Haskell platform 8.2.1, using Stack 1.5.1, Cabal 2.0.0.0. Windows 10 Fall Creators Update( This issue was also occurring pre FCU). The issue also occurs with 8.0.2a Prior to FCU, I could run ghci directly, but now i get: Access violation in generated code when reading 00000000046710f6 Can anyone help me out?-- Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com _______________________________________________ Glasgow-haskell-users mailing list Glasgow-haskell-users@haskell.org

http://mail.haskell.org/cgi-bin/mailman/listinfo/glasgow-haskell-users

...
_______________________________________________ Glasgow-haskell-users mailing list Glasgow-haskell-users@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/glasgow-haskell-users

--

Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com

Tamar Christina

6:57 p.m.

Ah, sorry, try "procdump -e 1 -ma -x . <pathtobinfolder>\ghc --interactive" the arguments to procdump changed. It's good that it's fixed in 8.4 at least, but would be good to know what it is. Could you also try the rc for 8.2.2? https://downloads.haskell.org/~ghc/8.2.2-rc1/ghc-8.2.1.20170929-x86_64-unkno... ---- On Sat, 21 Oct 2017 20:05:34 +0000 Michael McCulloch wrote ----

...

Hi, \ghc-8.2.1\mingw\bin\gcc --version produced no errors. the ghc 8.4 release you sent produced no errors as well. I have included the procdump output as well, in case it helps, same error mentioned before.

On Sat, Oct 21, 2017 at 1:54 PM Tamar Christina wrote: -- Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com Hi,

Could you try https://1drv.ms/u/s!AuQz_u-9HaJPmcQRFveWa9dMBi77hg ?

If you can still reproduce this issue with this build start with +RTS --generate-crash-dumps

and send the dump it creates. Note that this is a pre-release version of GHC 8.4 so some packages may not compile without updating version bounds.

Tamar

---- On Sat, 21 Oct 2017 02:54:49 +0000 Tamar Christina wrote ----

...
---- On Fri, 20 Oct 2017 23:51:43 +0000 Michael McCulloch wrote ----

...
Previously to FCU, the issue was also occuring with ghc8.0.2(a), however, it would appear that it is working again. I have provided the output of ghci -v3 *8.2.1).

Thanks, this is quite early on, does <ghc folder>\mingw\bin\gcc --version work?

...
I was unable to run procdump, it was giving me directory does not exist, even when placed in the bin folder.

Hmm that's odd, and you're running this from a normal cmd prompt? a dump would really be helpful here.

...
On Fri, Oct 20, 2017 at 4:08 PM Tamar Christina wrote: -- Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com Hi Michael,

Does this happen only with 8.2.1?

Can you try a clean vanilla GHC? https://downloads.haskell.org/~ghc/8.2.1/ghc-8.2.1-x86_64-unknown-mingw32.ta...

just to rule out any issues with toolings.

if it still happens, does ghci -v3 show anything?

if it still crashes can you run procdump on GHC directly and return the dump?

https://docs.microsoft.com/en-us/sysinternals/downloads/procdump

with "procdump -e 1 -x <pathtobinfolder>\ghc --interactive"

Thanks, Tamar

---- On Fri, 20 Oct 2017 14:02:31 +0000 Michael McCulloch wrote ----

...
Hello. After searching around I can't find people with a similar issue (Maybe I'm looking in the wrong places?). I installed Haskell platform 8.2.1, using Stack 1.5.1, Cabal 2.0.0.0. Windows 10 Fall Creators Update( This issue was also occurring pre FCU). The issue also occurs with 8.0.2a Prior to FCU, I could run ghci directly, but now i get: Access violation in generated code when reading 00000000046710f6 Can anyone help me out?-- Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com _______________________________________________ Glasgow-haskell-users mailing list Glasgow-haskell-users@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/glasgow-haskell-users

_______________________________________________ Glasgow-haskell-users mailing list Glasgow-haskell-users@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/glasgow-haskell-users

Michael McCulloch

7:24 p.m.

Here you go, the dumps for both. https://1drv.ms/u/s!AhjXZn763iGDtSiB7bBfJCmOfxQO On Sat, Oct 21, 2017 at 4:57 PM Tamar Christina wrote:

...

Ah, sorry,

try "procdump -e 1 -ma -x . <pathtobinfolder>\ghc --interactive"

the arguments to procdump changed.

It's good that it's fixed in 8.4 at least, but would be good to know what it is.

Could you also try the rc for 8.2.2?

https://downloads.haskell.org/~ghc/8.2.2-rc1/ghc-8.2.1.20170929-x86_64-unkno...

---- On Sat, 21 Oct 2017 20:05:34 +0000 Michael McCulloch < michael.james.mcculloch@gmail.com> wrote ----

...
Hi, \ghc-8.2.1\mingw\bin\gcc --version produced no errors. the ghc 8.4 release you sent produced no errors as well. I have included the procdump output as well, in case it helps, same error mentioned before.

On Sat, Oct 21, 2017 at 1:54 PM Tamar Christina wrote: -- Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com Hi,

Could you try https://1drv.ms/u/s!AuQz_u-9HaJPmcQRFveWa9dMBi77hg ?

If you can still reproduce this issue with this build start with +RTS --generate-crash-dumps

and send the dump it creates. Note that this is a pre-release version of GHC 8.4 so some packages may not compile without updating version bounds.

Tamar

---- On Sat, 21 Oct 2017 02:54:49 +0000 Tamar Christina < tamar@zhox.com> wrote ----

...
---- On Fri, 20 Oct 2017 23:51:43 +0000 Michael McCulloch <

michael.james.mcculloch@gmail.com> wrote ----

...
...
Previously to FCU, the issue was also occuring with ghc8.0.2(a), however, it would appear that it is working again. I have provided the output of ghci -v3 *8.2.1).

Thanks, this is quite early on, does <ghc folder>\mingw\bin\gcc --version work?

...
I was unable to run procdump, it was giving me directory does not exist, even when placed in the bin folder.

Hmm that's odd, and you're running this from a normal cmd prompt? a dump would really be helpful here.

...
On Fri, Oct 20, 2017 at 4:08 PM Tamar Christina

wrote:

...
-- Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com Hi Michael,

Does this happen only with 8.2.1?

Can you try a clean vanilla GHC?

https://downloads.haskell.org/~ghc/8.2.1/ghc-8.2.1-x86_64-unknown-mingw32.ta...

...
just to rule out any issues with toolings.

if it still happens, does ghci -v3 show anything?

if it still crashes can you run procdump on GHC directly and

return the dump?

...
https://docs.microsoft.com/en-us/sysinternals/downloads/procdump

...
with "procdump -e 1 -x <pathtobinfolder>\ghc --interactive"

Thanks, Tamar

---- On Fri, 20 Oct 2017 14:02:31 +0000 Michael McCulloch <

michael.james.mcculloch@gmail.com> wrote ----

...
...
Hello. After searching around I can't find people with a similar issue (Maybe I'm looking in the wrong places?). I installed Haskell platform 8.2.1, using Stack 1.5.1, Cabal 2.0.0.0. Windows 10 Fall Creators Update( This issue was also occurring pre FCU). The issue also occurs with 8.0.2a Prior to FCU, I could run ghci directly, but now i get: Access violation in generated code when reading 00000000046710f6 Can anyone help me out?-- Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com _______________________________________________ Glasgow-haskell-users mailing list Glasgow-haskell-users@haskell.org

http://mail.haskell.org/cgi-bin/mailman/listinfo/glasgow-haskell-users

...
_______________________________________________ Glasgow-haskell-users mailing list Glasgow-haskell-users@haskell.org

http://mail.haskell.org/cgi-bin/mailman/listinfo/glasgow-haskell-users

...
--

Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com

Tamar Christina

22 Oct 22 Oct

4:51 a.m.

Hi Michael, It seems your problem is with HitmanPro that you have installed. ExceptionAddress: 00007ffcc2b368ce (ntdll!RtlVirtualUnwind+0x000000000000001e) ExceptionCode: c0000005 (Access violation) ExceptionFlags: 00000000 NumberParameters: 2 Parameter[0]: 0000000000000000 Parameter[1]: 00000000046710f6 Attempt to read from address 00000000046710f6 0:000> lmvm hmpalert Browse full module list start end module name 00007ffc`ba4b0000 00007ffc`ba595000 hmpalert (export symbols) hmpalert.dll Loaded symbol image file: hmpalert.dll Image path: C:\Windows\System32\hmpalert.dll Image name: hmpalert.dll Browse all global symbols functions data Timestamp: Mon Jul 17 15:53:17 2017 (596CCF5D) CheckSum: 000F490C ImageSize: 000E5000 File version: 3.6.8.604 Product version: 3.6.8.604 File flags: 0 (Mask 3F) File OS: 40004 NT Win32 File type: 2.0 Dll File date: 00000000.00000000 Translations: 0400.04b0 CompanyName: SurfRight B.V. ProductName: HitmanPro.Alert InternalName: hmpalert.dll OriginalFilename: hmpalert_x64.dll ProductVersion: 3.6.8.604 FileVersion: 3.6.8.604 FileDescription: HitmanPro.Alert 64-bit Support Library LegalCopyright: © 2013-2017 SurfRight, a Sophos company Comments: Incorporates Threatstar Exploit Mitigation Platform (EMP) It seems HitmanPro is injecting itself into GHC's address space by throwing a signal and forcing the process to halt. GHC prior to the upcoming 8.4 release interprets this as one of it's needed dependencies crashing and so aborts the process before Hitman can handle the signal it threw. Until GHC 8.4 comes out, to get it working you should exclude the GHC binaries from Hitman's scanning. Cheers, Tamar ---- On Sat, 21 Oct 2017 23:24:11 +0000 Michael McCulloch wrote ----

...

Here you go, the dumps for both. https://1drv.ms/u/s!AhjXZn763iGDtSiB7bBfJCmOfxQO

On Sat, Oct 21, 2017 at 4:57 PM Tamar Christina wrote: -- Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com Ah, sorry,

try "procdump -e 1 -ma -x . <pathtobinfolder>\ghc --interactive"

the arguments to procdump changed.

It's good that it's fixed in 8.4 at least, but would be good to know what it is.

Could you also try the rc for 8.2.2?

https://downloads.haskell.org/~ghc/8.2.2-rc1/ghc-8.2.1.20170929-x86_64-unkno...

---- On Sat, 21 Oct 2017 20:05:34 +0000 Michael McCulloch wrote ----

...
Hi, \ghc-8.2.1\mingw\bin\gcc --version produced no errors. the ghc 8.4 release you sent produced no errors as well. I have included the procdump output as well, in case it helps, same error mentioned before.

On Sat, Oct 21, 2017 at 1:54 PM Tamar Christina wrote: -- Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com Hi,

Could you try https://1drv.ms/u/s!AuQz_u-9HaJPmcQRFveWa9dMBi77hg ?

If you can still reproduce this issue with this build start with +RTS --generate-crash-dumps

and send the dump it creates. Note that this is a pre-release version of GHC 8.4 so some packages may not compile without updating version bounds.

Tamar

---- On Sat, 21 Oct 2017 02:54:49 +0000 Tamar Christina wrote ----

...
---- On Fri, 20 Oct 2017 23:51:43 +0000 Michael McCulloch wrote ----

...
Previously to FCU, the issue was also occuring with ghc8.0.2(a), however, it would appear that it is working again. I have provided the output of ghci -v3 *8.2.1).

Thanks, this is quite early on, does <ghc folder>\mingw\bin\gcc --version work?

...
I was unable to run procdump, it was giving me directory does not exist, even when placed in the bin folder.

Hmm that's odd, and you're running this from a normal cmd prompt? a dump would really be helpful here.

...
On Fri, Oct 20, 2017 at 4:08 PM Tamar Christina wrote: -- Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com Hi Michael,

Does this happen only with 8.2.1?

Can you try a clean vanilla GHC? https://downloads.haskell.org/~ghc/8.2.1/ghc-8.2.1-x86_64-unknown-mingw32.ta...

just to rule out any issues with toolings.

if it still happens, does ghci -v3 show anything?

if it still crashes can you run procdump on GHC directly and return the dump?

https://docs.microsoft.com/en-us/sysinternals/downloads/procdump

with "procdump -e 1 -x <pathtobinfolder>\ghc --interactive"

Thanks, Tamar

---- On Fri, 20 Oct 2017 14:02:31 +0000 Michael McCulloch wrote ----

...
Hello. After searching around I can't find people with a similar issue (Maybe I'm looking in the wrong places?). I installed Haskell platform 8.2.1, using Stack 1.5.1, Cabal 2.0.0.0. Windows 10 Fall Creators Update( This issue was also occurring pre FCU). The issue also occurs with 8.0.2a Prior to FCU, I could run ghci directly, but now i get: Access violation in generated code when reading 00000000046710f6 Can anyone help me out?-- Michael McCulloch c: (403) 629-9645 e: michael.james.mcculloch@gmail.com _______________________________________________ Glasgow-haskell-users mailing list Glasgow-haskell-users@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/glasgow-haskell-users

_______________________________________________ Glasgow-haskell-users mailing list Glasgow-haskell-users@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/glasgow-haskell-users

2767

Age (days ago)

2769

Last active (days ago)

List overview

Download

8 comments

2 participants

participants (2)

Michael McCulloch
Tamar Christina