Hi, I use sublime with sublime-haskell. m. On Fri, Nov 8, 2013 at 8:55 PM, Tommy Thorn wrote:

I use both kinds: Emacs + haskell-mode and Emacs For Mac OS X + haskell-mode.

:)

Tommy

On Nov 8, 2013, at 11:44 , Corentin Dupont wrote:

...

Hi cafe, I would like to know which IDE are you using? I use Leksah, I like the GUI design and constant compilation process. However, the development seems to be slowing down: last version date from early 2012. The installation process is very painful.

There is FPComplete IDE coming up, but it's commercial. I'm experimenting with it, anyway: how to compile using cabal files? It doesn't seem to recognize them. Will there be an off-line version?

I'm interested to know if you are using vim to develop: which extension are you using? I'm interested in continuous compilation, project files browsing, code completion, search-in-files.

Best, Corentin

_______________________________________________ Haskell-Cafe mailing list Haskell-Cafe@haskell.org http://www.haskell.org/mailman/listinfo/haskell-cafe

_______________________________________________ Haskell-Cafe mailing list Haskell-Cafe@haskell.org http://www.haskell.org/mailman/listinfo/haskell-cafe

I'm a vimer :) although I use it a lot to do small editing on random files, I've never used it as a dev environment. On Fri, Nov 8, 2013 at 9:08 PM, David Thomas wrote:

I use vim, though I think if you know neither vim nor emacs, emacs might be a better choice for Haskell.

On Fri, Nov 8, 2013 at 11:57 AM, Miro Karpis wrote:

...

Hi, I use sublime with sublime-haskell.

m.

On Fri, Nov 8, 2013 at 8:55 PM, Tommy Thorn wrote:

...

I use both kinds: Emacs + haskell-mode and Emacs For Mac OS X + haskell-mode.

:)

Tommy

On Nov 8, 2013, at 11:44 , Corentin Dupont wrote:

...

Hi cafe, I would like to know which IDE are you using? I use Leksah, I like the GUI design and constant compilation process. However, the development seems to be slowing down: last version date from early 2012. The installation process is very painful.

There is FPComplete IDE coming up, but it's commercial. I'm experimenting with it, anyway: how to compile using cabal files? It doesn't seem to recognize them. Will there be an off-line version?

I'm interested to know if you are using vim to develop: which extension are you using? I'm interested in continuous compilation, project files browsing, code completion, search-in-files.

Best, Corentin

_______________________________________________ Haskell-Cafe mailing list Haskell-Cafe@haskell.org http://www.haskell.org/mailman/listinfo/haskell-cafe

_______________________________________________ Haskell-Cafe mailing list Haskell-Cafe@haskell.org http://www.haskell.org/mailman/listinfo/haskell-cafe

_______________________________________________ Haskell-Cafe mailing list Haskell-Cafe@haskell.org http://www.haskell.org/mailman/listinfo/haskell-cafe

_______________________________________________ Haskell-Cafe mailing list Haskell-Cafe@haskell.org http://www.haskell.org/mailman/listinfo/haskell-cafe

Well, as the maintainer I suppose I should mention EclipseFP. It doesn't have partial compilation but can rebuild your project when you save a file, so you see the impact of your changes. It uses Cabal settings and has a Cabal editor. It provides code completion, and you can search and rename across files and projects within your workspace. I dont't have a huge amount of time at the moment to develop new big things, but I try to fix bugs as they're reported and release a version every three months or so. I use it of course for all my Haskell developments. Of course you need to have a JRE and download/install Eclipse, and I know Eclipse is not everybody's cup of tea. JP On Fri, Nov 8, 2013 at 10:01 PM, Александр Сухарев wrote:

I’m too, but I use it alot. And here are some pretty useful vim plugins

set nocompatible filetype off

set rtp+=~/.vim/bundle/vundle/ call vundle#rc()

Bundle 'gmarik/vundle'

Bundle 'bling/vim-airline' Bundle 'Shougo/unite.vim' Bundle 'kien/ctrlp.vim' Bundle 'scrooloose/nerdtree' Bundle 'majutsushi/tagbar' Bundle 'tpope/vim-sensible' Bundle 'tpope/vim-unimpaired'

" { Edit Bundle 'terryma/vim-multiple-cursors' Bundle 'scrooloose/syntastic' Bundle 'sjl/gundo.vim' Bundle 'scrooloose/nerdcommenter' Bundle 'godlygeek/tabular' Bundle 'Raimondi/delimitMate' " }

" { Git Bundle 'airblade/vim-gitgutter' Bundle 'tpope/vim-fugitive' " }

" reStructuredText Bundle 'Rykka/riv.vim' " Markdown Bundle 'plasticboy/vim-markdown'

" Bundle 'Valloric/YouCompleteMe’ " Bundle 'Shougo/vimproc.vim'

" { Haskell " Bundle 'urso/haskell_syntax.vim' " Bundle 'eagletmt/ghcmod-vim' Bundle 'Twinside/vim-haskellConceal' Bundle 'vim-scripts/haskell.vim' Bundle 'Twinside/vim-haskellFold' Bundle 'bitc/lushtags' Bundle 'vim-scripts/Darcs' " }

" { Dash Bundle 'rizzatti/funcoo.vim' Bundle 'rizzatti/dash.vim' " }

filetype plugin indent on

...

2013/11/9 Corentin Dupont

...

I'm a vimer :) although I use it a lot to do small editing on random files, I've never used it as a dev environment.

On Fri, Nov 8, 2013 at 9:08 PM, David Thomas wrote:

...

I use vim, though I think if you know neither vim nor emacs, emacs might be a better choice for Haskell.

On Fri, Nov 8, 2013 at 11:57 AM, Miro Karpis wrote:

...

Hi, I use sublime with sublime-haskell.

m.

On Fri, Nov 8, 2013 at 8:55 PM, Tommy Thorn wrote:

...

I use both kinds: Emacs + haskell-mode and Emacs For Mac OS X + haskell-mode.

:)

Tommy

On Nov 8, 2013, at 11:44 , Corentin Dupont wrote:

...

Hi cafe, I would like to know which IDE are you using? I use Leksah, I like the GUI design and constant compilation process. However, the development seems to be slowing down: last version date from early 2012. The installation process is very painful.

There is FPComplete IDE coming up, but it's commercial. I'm experimenting with it, anyway: how to compile using cabal files? It doesn't seem to recognize them. Will there be an off-line version?

I'm interested to know if you are using vim to develop: which extension are you using? I'm interested in continuous compilation, project files browsing, code completion, search-in-files.

Best, Corentin

_______________________________________________ Haskell-Cafe mailing list Haskell-Cafe@haskell.org http://www.haskell.org/mailman/listinfo/haskell-cafe

_______________________________________________ Haskell-Cafe mailing list Haskell-Cafe@haskell.org http://www.haskell.org/mailman/listinfo/haskell-cafe

_______________________________________________ Haskell-Cafe mailing list Haskell-Cafe@haskell.org http://www.haskell.org/mailman/listinfo/haskell-cafe

_______________________________________________ Haskell-Cafe mailing list Haskell-Cafe@haskell.org http://www.haskell.org/mailman/listinfo/haskell-cafe

_______________________________________________ Haskell-Cafe mailing list Haskell-Cafe@haskell.org http://www.haskell.org/mailman/listinfo/haskell-cafe

_______________________________________________ Haskell-Cafe mailing list Haskell-Cafe@haskell.org http://www.haskell.org/mailman/listinfo/haskell-cafe

-- JP Moresmau http://jpmoresmau.blogspot.com/

I am usually an emacs+evil windows user, but the first time I tried to set things up for haskell, I failed. I still use emacs for small scripts I use eclipseFP for other projects for the following reasons: - it was easy to set-up - it has a lot features out of the box - I can use Vrapper to get vim keybindings - autocomplete - HLint support - stylish haskell integration - unit tests support with HTF - cabal file edition I never used eclipse before, but I did not find it too painful. The trade-off with emacs configuration difficulty was more than enough for me. Thank you JP Moresmau! On 9 November 2013 22:34, Vagif Verdi wrote:

Emacs + haskell-mode gives you:

- cabal project loading, support sandboxing. - autocomplete (using generated TAGS file with hasktags) - code navigation. You click on a function and it jumps to its definition. - navigation of top level functions (imenu) - type info - error and warning jumps - import management - ghci - hoogle and hayoo help integration - hlint integration

You can do continuous compilation using emacs fly-mode.

On Friday, November 8, 2013 11:44:44 AM UTC-8, Corentin Dupont wrote:

...

Hi cafe, I would like to know which IDE are you using? I use Leksah, I like the GUI design and constant compilation process. However, the development seems to be slowing down: last version date from early 2012. The installation process is very painful.

There is FPComplete IDE coming up, but it's commercial. I'm experimenting with it, anyway: how to compile using cabal files? It doesn't seem to recognize them. Will there be an off-line version?

I'm interested to know if you are using vim to develop: which extension are you using? I'm interested in continuous compilation, project files browsing, code completion, search-in-files.

Best, Corentin

_______________________________________________ Haskell-Cafe mailing list Haskell-Cafe@haskell.org http://www.haskell.org/mailman/listinfo/haskell-cafe

-- Simon

I use emacs + haskell-mode and some plugs developing in emacs very useful! 2013/11/11 Ketil Malde

...

Emacs + haskell-mode gives you:

[lots of goodies I need to learn more about]

...

You can do continuous compilation using emacs fly-mode.

After starting to use ghc-mod, I never looked back. Having trouble spots being automatically highlighted is really a huge improvement over the old write-compile-debug cycle. Other benefits, like automatic type signature insertion is also nice, of course.

(I haven't really tried anything else, so perhaps this is standard fare these days. Just wanted to voice my appreciation, I guess :-)

-k -- If I haven't seen further, it is by standing in the footprints of giants _______________________________________________ Haskell-Cafe mailing list Haskell-Cafe@haskell.org http://www.haskell.org/mailman/listinfo/haskell-cafe

I use Leksah, that provides much of the things mentioned here except perhaps hLint integration. Another nice feature is that it can rebuild the tree of project dependencies when something changes. 2013/11/12 m00nlight

The haskell-mode 13.7 of Emacs will eat all the cpu resource on my computer when I configure the indent of haskell mode. Does any one encounter the same issue ?

-- -- Best Regards From Emacs Like Excellent Browser: Conkeror

At 2013-11-12 00:53:52,"Thanatos xiao" wrote:

I use emacs + haskell-mode and some plugs developing in emacs very useful!

2013/11/11 Ketil Malde

...

...

Emacs + haskell-mode gives you:

[lots of goodies I need to learn more about]

...

You can do continuous compilation using emacs fly-mode.

After starting to use ghc-mod, I never looked back. Having trouble spots being automatically highlighted is really a huge improvement over the old write-compile-debug cycle. Other benefits, like automatic type signature insertion is also nice, of course.

(I haven't really tried anything else, so perhaps this is standard fare these days. Just wanted to voice my appreciation, I guess :-)

-k -- If I haven't seen further, it is by standing in the footprints of giants _______________________________________________ Haskell-Cafe mailing list Haskell-Cafe@haskell.org http://www.haskell.org/mailman/listinfo/haskell-cafe

<#1424a223dde85978_> _______________________________________________ Haskell-Cafe mailing list Haskell-Cafe@haskell.org http://www.haskell.org/mailman/listinfo/haskell-cafe

-- Alberto.

Edgar, for tags I use ctags (exuberant) with the following tag file: --langdef=haskell --langmap=haskell:.hs --regex-haskell=/^module[ \s]([a-zA-Z0-9]*)[ \s]where/\1/m,module/ --regex-haskell=/^import[ \s](.*)/\1/i,import/ --regex-haskell=/^class[ \s](.*)where/\1/t,typeclasses/ --regex-haskell=/^instance[ \s](.*)where/\1/c,classes/ --regex-haskell=/^data[ \s]([a-zA-Z0-9]*)[ \s]/\1/d,data/ --regex-haskell=/^([ \sa-zA-Z0-9]*)[ \s]::[ \s](.*)$/\1/f,functions/ And then using tagbar I customize my .vimrc with: " TagBar nmap <Leader>tb :TagbarOpenAutoClose<CR> let g:tagbar_type_haskell = { \ 'ctagstype' : 'Haskell', \ 'kinds' : [ \ 'm:module', \ 'i:import', \ 'd:data', \ 't:typeclasses', \ 'c:instances', \ 'f:functions', \ ] \ } It could probably be improved but it works well enough to jump around to symbols. On Sat, Nov 23, 2013 at 3:09 AM, Edgar Klerks wrote:

If you use conque, you can run a GHCI session in vim: http://code.google.com/p/conque/ That works pretty well.

Neocomplcache +ghcmod + neco-ghc delivers good support for auto-completion.

Syntastic will annotate errors in your source file.

Gundo for reverting and viewing local changes, vim stores internally a tree with changes. With some configuration it can remember changes for days. The only drawback is that you can always hit u, because your last weeks changes are still remembered.

For searching in files, I use ack.vim.

And for moving to files, I use ctrl-p, which let you open files with little typing.

You should also look into sessions (a vim feature). With this you can save your current development environment and start from there.

Bundle 'neocomplcache' Bundle 'surround.vim' Bundle 'eagletmt/neco-ghc' Bundle "eagletmt/ghcmod-vim" Bundle 'ctrlp.vim' Bundle 'ack.vim' Bundle 'Gundo' Bundle 'scrooloose/syntastic' Bundle "Shougo/vimproc"

There are a lot of different plugins I use, but these have proven themselves useful, also for general development.

I miss a program for creating tagfiles for haskell. This would be handy, because you can jump quickly to definition file with this.

Greets,

Edgar

On Fri, Nov 8, 2013 at 8:44 PM, Corentin Dupont

...

wrote:

...

Hi cafe, I would like to know which IDE are you using? I use Leksah, I like the GUI design and constant compilation process. However, the development seems to be slowing down: last version date from early 2012. The installation process is very painful.

There is FPComplete IDE coming up, but it's commercial. I'm experimenting with it, anyway: how to compile using cabal files? It doesn't seem to recognize them. Will there be an off-line version?

I'm interested to know if you are using vim to develop: which extension are you using? I'm interested in continuous compilation, project files browsing, code completion, search-in-files.

Best, Corentin

_______________________________________________ Haskell-Cafe mailing list Haskell-Cafe@haskell.org http://www.haskell.org/mailman/listinfo/haskell-cafe

_______________________________________________ Haskell-Cafe mailing list Haskell-Cafe@haskell.org http://www.haskell.org/mailman/listinfo/haskell-cafe

-- Schell Scivally http://blog.efnx.com http://github.com/schell http://twitter.com/schellsan

I'm using emacs just for basic text file editing, no auto-completion, no flymake, etc. I find it quite dificult to navigate between files of a project and have no time to configure emacs to work as an IDE. There are lots of plugins pointed out in the wiki and such, but there's a lack of step-by-step tutorials or packages that works out of the box. I always need to search the entire web for the lines I need to punch into .emacs file. It's already hard to maintain brain's memory for other stuff, having to learn my way thru emacs was time consuming and yet if I would start a fresh-install of it, I probably would need to search the entire web again.

Hi, Mateusz Kowalczyk wrote:

Nowadays, with a recent-enough emacs you can do ‘M-x install-package’ which does everything for you.

Which packages should I install this way to get decent Haskell support? Tillmann

I've installed haskell-mode and some others from the package manager. Yet I have no auto-completion, no go-to-definition, no overview, no function lookup/search. I use Eclipse for Java, and it works out of the box. The lack of an easy-to-setup IDE is something I really miss in "Haskell environment". How much time would it take to setup emacs as an IDE for Haskell? Considering I'm pretty newby as emacs.

If you're used to Eclipse, why don't you give EclipseFP a try? I'm not saying it's perfect and of course it's not out of the box in Eclipse, but maybe it could suit you better. Feel free to post issues on the Github issues tracker or the sourceforge discussion. Thanks JP On Mon, Nov 25, 2013 at 2:21 PM, Thiago Negri wrote:

I've installed haskell-mode and some others from the package manager. Yet I have no auto-completion, no go-to-definition, no overview, no function lookup/search.

I use Eclipse for Java, and it works out of the box. The lack of an easy-to-setup IDE is something I really miss in "Haskell environment".

How much time would it take to setup emacs as an IDE for Haskell? Considering I'm pretty newby as emacs.

_______________________________________________ Haskell-Cafe mailing list Haskell-Cafe@haskell.org http://www.haskell.org/mailman/listinfo/haskell-cafe

-- JP Moresmau http://jpmoresmau.blogspot.com/

On Sat, Nov 23, 2013 at 12:09:23PM +0100, Edgar Klerks wrote:

I miss a program for creating tagfiles for haskell. This would be handy, because you can jump quickly to definition file with this.

There are a few of those on hackage: http://hackage.haskell.org/packages/search?terms=hasktags I've tried hasktags in the past and it's worked well for me. /M -- Magnus Therning OpenPGP: 0xAB4DFBA4 email: magnus@therning.org jabber: magnus@therning.org twitter: magthe http://therning.org/magnus I invented the term Object-Oriented, and I can tell you I did not have C++ in mind. -- Alan Kay