Also, the more eager list allocation can increase residency, but I don't think it can cause a leak. On Tue, May 12, 2020, 9:48 AM David Feuer wrote:

The cost of allocating the extra pairs.

On Tue, May 12, 2020, 5:11 AM Andreas Abel wrote:

...

...

I don't know how much that'll cost in practice.

What costs are you worried about?

On 2020-05-12 00:08, David Feuer wrote:

...

In Data.List, we define

transpose :: [[a]] -> [[a]] transpose [] = [] transpose ([] : xss) = transpose xss transpose ((x : xs) : xss) = (x : [h | (h : _) <- xss]) : transpose (xs : [t | (_ : t) <- xss])

The potential difficulty is that we essentially mapMaybe over the xss list twice in the third case. So we hang on to the heads where we need the tails and the tails where we need the heads. We could fix that with something like this:

transpose ((x : xs) : xss) = (x : fronts) : transpose (xs : rears) where (fronts, rears) = unzip [(h,t) | (h : t) <- xss]

I don't know how much that'll cost in practice.

_______________________________________________ Libraries mailing list Libraries@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries

unzip should fuse with its argument, so inlining presumably won't do anything there. The pairs that unzip itself creates are actually what prevent the leak. GHC creates "selector thunks" to deconstruct them, which the garbage collector can reduce. The garbage collector will never reduce the deconstruction of list conses. On Wed, May 13, 2020, 4:27 PM Ryan Reich wrote:

Why not just inline the definition of unzip and hand-optimize away the pairs?

On Tue, May 12, 2020, 10:24 David Feuer wrote:

...

Also, the more eager list allocation can increase residency, but I don't think it can cause a leak.

On Tue, May 12, 2020, 9:48 AM David Feuer wrote:

...

The cost of allocating the extra pairs.

On Tue, May 12, 2020, 5:11 AM Andreas Abel wrote:

...

...

I don't know how much that'll cost in practice.

What costs are you worried about?

On 2020-05-12 00:08, David Feuer wrote:

...

In Data.List, we define

transpose :: [[a]] -> [[a]] transpose [] = [] transpose ([] : xss) = transpose xss transpose ((x : xs) : xss) = (x : [h | (h : _) <- xss]) : transpose (xs : [t | (_ : t) <- xss])

The potential difficulty is that we essentially mapMaybe over the xss list twice in the third case. So we hang on to the heads where we need the tails and the tails where we need the heads. We could fix that with something like this:

transpose ((x : xs) : xss) = (x : fronts) : transpose (xs : rears) where (fronts, rears) = unzip [(h,t) | (h : t) <- xss]

I don't know how much that'll cost in practice.

_______________________________________________ Libraries mailing list Libraries@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries

_______________________________________________ Libraries mailing list Libraries@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries

My suggestion was much less sophisticated even than that, and is basically what David answered with fusion. Also according to his answer, the original code of transpose lacks the laziness that unzip's actual implementation would provide. I think what that means is that his concern over allocating extra pairs is about the ones created internally by unzip when it builds the lazy heads-and-tails accessors. On Thu, May 14, 2020, 03:27 Andreas Abel wrote:

On 2020-05-13 22:27, Ryan Reich wrote:

...

Why not just inline the definition of unzip and hand-optimize away the pairs?

Isn't this what the original code of transpose is doing?

...

On Tue, May 12, 2020, 10:24 David Feuer mailto:david.feuer@gmail.com> wrote:

Also, the more eager list allocation can increase residency, but I don't think it can cause a leak.

On Tue, May 12, 2020, 9:48 AM David Feuer mailto:david.feuer@gmail.com> wrote:

The cost of allocating the extra pairs.

On Tue, May 12, 2020, 5:11 AM Andreas Abel mailto:andreas.abel@ifi.lmu.de> wrote:

> I don't know how much that'll cost in practice.

What costs are you worried about?

On 2020-05-12 00:08, David Feuer wrote: > In Data.List, we define > > transpose :: [[a]] -> [[a]] > transpose [] = [] > transpose ([] : xss) = transpose xss > transpose ((x : xs) : xss) = (x : [h | (h : _) <- xss]) : transpose (xs > : [t | (_ : t) <- xss]) > > The potential difficulty is that we essentially mapMaybe over the xss > list twice in the third case. So we hang on to the heads where we need > the tails and the tails where we need the heads. We could fix that with > something like this: > > transpose ((x : xs) : xss) = (x : fronts) : transpose (xs : rears) > where > (fronts, rears) = unzip [(h,t) | (h : t) <- xss] > > I don't know how much that'll cost in practice. > > _______________________________________________ > Libraries mailing list > Libraries@haskell.org mailto:Libraries@haskell.org > http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries >

_______________________________________________ Libraries mailing list Libraries@haskell.org mailto:Libraries@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries

_______________________________________________ Libraries mailing list Libraries@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries

Hopefully I'm not fooling myself...how about this? --- transpose :: [[a]] -> [[a]] transpose [] = [] transpose (r1 : rrest) = zipWith' (:) (:[]) id r1 (transpose rrest) zipWith' :: (a -> b -> c) -> (a -> c) -> (b -> c) -> ([a] -> [b] -> [c]) zipWith' _ _ fb [] bs = fb <$> bs zipWith' _ fa _ as [] = fa <$> as zipWith' f fa fb (a : as) (b : bs) = f a b : zipWith' f fa fb as bs main = do mapM_ (print . transpose) [ [[1,2,3]], [[1,2,3],[4,5,6]], [[1,2,3],[4,5,6],[7,8,9]], [[10,11],[20],[],[30,31,32]] ] --- I see the output: --- [[1],[2],[3]] [[1,4],[2,5],[3,6]] [[1,4,7],[2,5,8],[3,6,9]] [[10,20,30],[11,31],[32]] --- which is correct (the last example is the one from the haddocks). I was concerned that the definition of zipWith' (which is akin to the Map function unionWith) is not compatible with the build/fold fusion rule, but the implementation of zipWith itself is basically the same. Ryan On Thu, May 14, 2020 at 1:17 PM David Feuer wrote:

Right. I still think it might be the right thing to do, though. I'm not a big fan of general-purpose library functions that have any unnecessary memory leak hazard. The biggest counterargument is that real code is unlikely to run into that problem.

On Thu, May 14, 2020, 3:35 PM Ryan Reich wrote:

...

My suggestion was much less sophisticated even than that, and is basically what David answered with fusion. Also according to his answer, the original code of transpose lacks the laziness that unzip's actual implementation would provide.

I think what that means is that his concern over allocating extra pairs is about the ones created internally by unzip when it builds the lazy heads-and-tails accessors.

On Thu, May 14, 2020, 03:27 Andreas Abel wrote:

...

On 2020-05-13 22:27, Ryan Reich wrote:

...

Why not just inline the definition of unzip and hand-optimize away the pairs?

Isn't this what the original code of transpose is doing?

...

On Tue, May 12, 2020, 10:24 David Feuer mailto:david.feuer@gmail.com> wrote:

Also, the more eager list allocation can increase residency, but I don't think it can cause a leak.

On Tue, May 12, 2020, 9:48 AM David Feuer mailto:david.feuer@gmail.com> wrote:

The cost of allocating the extra pairs.

On Tue, May 12, 2020, 5:11 AM Andreas Abel mailto:andreas.abel@ifi.lmu.de> wrote:

> I don't know how much that'll cost in practice.

What costs are you worried about?

On 2020-05-12 00:08, David Feuer wrote: > In Data.List, we define > > transpose :: [[a]] -> [[a]] > transpose [] = [] > transpose ([] : xss) = transpose xss > transpose ((x : xs) : xss) = (x : [h | (h : _) <- xss]) : transpose (xs > : [t | (_ : t) <- xss]) > > The potential difficulty is that we essentially mapMaybe over the xss > list twice in the third case. So we hang on to the heads where we need > the tails and the tails where we need the heads. We could fix that with > something like this: > > transpose ((x : xs) : xss) = (x : fronts) : transpose (xs : rears) > where > (fronts, rears) = unzip [(h,t) | (h : t) <- xss] > > I don't know how much that'll cost in practice. > > _______________________________________________ > Libraries mailing list > Libraries@haskell.org mailto:Libraries@haskell.org > http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries >

_______________________________________________ Libraries mailing list Libraries@haskell.org mailto:Libraries@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries

_______________________________________________ Libraries mailing list Libraries@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries

How about the following variant? transpose = takeWhile (not . null) . foldr (foldr f id) (repeat []) where f x xs ~(y:ys) = (x:y) : xs ys Although I don’t really understand the memory leak situation, I think you might be able to get the pair behaviour with a stream type: data Stream a = a :< Stream a streamToList :: Stream [a] -> [[a]] streamToList ([] :< _ ) = [] streamToList (x :< xs) = x : streamToList xs transpose = streamToList . foldr (foldr f id) (fix ([] :<)) where f x xs ~(y :< ys) = (x:y) :< xs ys And you could turn the streamToList function into a good producer like so: streamToList :: Stream [a] -> [[a]] streamToList xs = build (\c n -> let go ([] :< _ ) = n go (x :< xs) = c x (go xs) in go xs) The other advantage of this of course is that transpose becomes a good consumer.

On 15 May 2020, at 01:15, David Feuer wrote:

That doesn't look like it works on infinite lists.

On Thu, May 14, 2020, 8:09 PM Ryan Reich mailto:ryan.reich@gmail.com> wrote: Hopefully I'm not fooling myself...how about this?

--- transpose :: [[a]] -> [[a]] transpose [] = [] transpose (r1 : rrest) = zipWith' (:) (:[]) id r1 (transpose rrest)

zipWith' :: (a -> b -> c) -> (a -> c) -> (b -> c) -> ([a] -> [b] -> [c]) zipWith' _ _ fb [] bs = fb <$> bs zipWith' _ fa _ as [] = fa <$> as zipWith' f fa fb (a : as) (b : bs) = f a b : zipWith' f fa fb as bs

main = do mapM_ (print . transpose) [ [[1,2,3]], [[1,2,3],[4,5,6]], [[1,2,3],[4,5,6],[7,8,9]], [[10,11],[20],[],[30,31,32]] ] ---

I see the output: --- [[1],[2],[3]] [[1,4],[2,5],[3,6]] [[1,4,7],[2,5,8],[3,6,9]] [[10,20,30],[11,31],[32]] ---

which is correct (the last example is the one from the haddocks).

I was concerned that the definition of zipWith' (which is akin to the Map function unionWith) is not compatible with the build/fold fusion rule, but the implementation of zipWith itself is basically the same.

Ryan

On Thu, May 14, 2020 at 1:17 PM David Feuer mailto:david.feuer@gmail.com> wrote: Right. I still think it might be the right thing to do, though. I'm not a big fan of general-purpose library functions that have any unnecessary memory leak hazard. The biggest counterargument is that real code is unlikely to run into that problem.

On Thu, May 14, 2020, 3:35 PM Ryan Reich mailto:ryan.reich@gmail.com> wrote: My suggestion was much less sophisticated even than that, and is basically what David answered with fusion. Also according to his answer, the original code of transpose lacks the laziness that unzip's actual implementation would provide.

I think what that means is that his concern over allocating extra pairs is about the ones created internally by unzip when it builds the lazy heads-and-tails accessors.

On Thu, May 14, 2020, 03:27 Andreas Abel mailto:andreas.abel@ifi.lmu.de> wrote: On 2020-05-13 22:27, Ryan Reich wrote:

...

Why not just inline the definition of unzip and hand-optimize away the pairs?

Isn't this what the original code of transpose is doing?

...

On Tue, May 12, 2020, 10:24 David Feuer mailto:david.feuer@gmail.com mailto:david.feuer@gmail.com>> wrote:

Also, the more eager list allocation can increase residency, but I don't think it can cause a leak.

On Tue, May 12, 2020, 9:48 AM David Feuer mailto:david.feuer@gmail.com mailto:david.feuer@gmail.com>> wrote:

The cost of allocating the extra pairs.

On Tue, May 12, 2020, 5:11 AM Andreas Abel mailto:andreas.abel@ifi.lmu.de mailto:andreas.abel@ifi.lmu.de>> wrote:

> I don't know how much that'll cost in practice.

What costs are you worried about?

On 2020-05-12 00:08, David Feuer wrote: > In Data.List, we define > > transpose :: [[a]] -> [[a]] > transpose [] = [] > transpose ([] : xss) = transpose xss > transpose ((x : xs) : xss) = (x : [h | (h : _) <- xss]) : transpose (xs > : [t | (_ : t) <- xss]) > > The potential difficulty is that we essentially mapMaybe over the xss > list twice in the third case. So we hang on to the heads where we need > the tails and the tails where we need the heads. We could fix that with > something like this: > > transpose ((x : xs) : xss) = (x : fronts) : transpose (xs : rears) > where > (fronts, rears) = unzip [(h,t) | (h : t) <- xss] > > I don't know how much that'll cost in practice. > > _______________________________________________ > Libraries mailing list > Libraries@haskell.org mailto:Libraries@haskell.org mailto:Libraries@haskell.org> > http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries >

_______________________________________________ Libraries mailing list Libraries@haskell.org mailto:Libraries@haskell.org mailto:Libraries@haskell.org> http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries

_______________________________________________ Libraries mailing list Libraries@haskell.org mailto:Libraries@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries

_______________________________________________ Libraries mailing list Libraries@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries

Never mind, that one is broken. I should probably not write these late in the evening. On Thu, May 14, 2020 at 10:30 PM Ryan Reich wrote:

So it doesn't, but this one does (*):

--- transpose :: [[a]] -> [[a]] transpose [] = [] transpose [r] = map (:[]) r transpose (r1 : rrest) = zip' r1 (transpose rrest) where zip' [] bs = bs zip' (a : as) ~(b : bs) = (a : b) : zip' as bs

main = do mapM_ (print . transpose) [ [[1,2,3]], [[1,2,3],[4,5,6]], [[1,2,3],[4,5,6],[7,8,9]], [[10,11],[20],[],[30,31,32]] ] print $ take 10 $ transpose [[0 ..]] --print $ map (take 10) $ transpose (repeat [0]) print $ take 3 $ map (take 3) $ transpose (repeat [0..]) ---

It's true that this implementation will make the commented line diverge. *However*, (*) the stock implementation of transpose also diverges! Try it: head <$> transpose (repeat [0]) in ghci will print [0 and then loop. So I think this one is okay by that standard. Does it do better at allocation than the existing one or the one with unzip?

It's actually not even well-defined what the transpose would be if we allow infinitely many rows and also use the "condensing" property where the columns skip over nonexistent terms in the rows. How would you even prove that transpose (repeat [0]) has length 1? You'd have to rule out the existence of any second term in any of the infinitely many rows. Of course, in this example there is a fast way to do that, but the rows could be anything, so the problem is uncomputable. This logic is also why the final test above actually does terminate: because we find the requisite number of elements early on (in fact, instantly, since the rows are all infinite).

This actually raises the question of whether transpose even "should" care about infinitely many rows or columns (I know, the behavior is standardized; pretend we're discussing a new alternative transpose' that explicitly only does finite lists). </rant>

Ryan

On Thu, May 14, 2020 at 5:15 PM David Feuer wrote:

...

That doesn't look like it works on infinite lists.

On Thu, May 14, 2020, 8:09 PM Ryan Reich wrote:

...

Hopefully I'm not fooling myself...how about this?

--- transpose :: [[a]] -> [[a]] transpose [] = [] transpose (r1 : rrest) = zipWith' (:) (:[]) id r1 (transpose rrest)

zipWith' :: (a -> b -> c) -> (a -> c) -> (b -> c) -> ([a] -> [b] -> [c]) zipWith' _ _ fb [] bs = fb <$> bs zipWith' _ fa _ as [] = fa <$> as zipWith' f fa fb (a : as) (b : bs) = f a b : zipWith' f fa fb as bs

main = do mapM_ (print . transpose) [ [[1,2,3]], [[1,2,3],[4,5,6]], [[1,2,3],[4,5,6],[7,8,9]], [[10,11],[20],[],[30,31,32]] ] ---

I see the output: --- [[1],[2],[3]] [[1,4],[2,5],[3,6]] [[1,4,7],[2,5,8],[3,6,9]] [[10,20,30],[11,31],[32]] ---

which is correct (the last example is the one from the haddocks).

I was concerned that the definition of zipWith' (which is akin to the Map function unionWith) is not compatible with the build/fold fusion rule, but the implementation of zipWith itself is basically the same.

Ryan

On Thu, May 14, 2020 at 1:17 PM David Feuer wrote:

...

Right. I still think it might be the right thing to do, though. I'm not a big fan of general-purpose library functions that have any unnecessary memory leak hazard. The biggest counterargument is that real code is unlikely to run into that problem.

On Thu, May 14, 2020, 3:35 PM Ryan Reich wrote:

...

My suggestion was much less sophisticated even than that, and is basically what David answered with fusion. Also according to his answer, the original code of transpose lacks the laziness that unzip's actual implementation would provide.

I think what that means is that his concern over allocating extra pairs is about the ones created internally by unzip when it builds the lazy heads-and-tails accessors.

On Thu, May 14, 2020, 03:27 Andreas Abel wrote:

...

On 2020-05-13 22:27, Ryan Reich wrote: > Why not just inline the definition of unzip and hand-optimize away the > pairs?

Isn't this what the original code of transpose is doing?

> On Tue, May 12, 2020, 10:24 David Feuer mailto:david.feuer@gmail.com> wrote: > > Also, the more eager list allocation can increase residency, but I > don't think it can cause a leak. > > On Tue, May 12, 2020, 9:48 AM David Feuer < david.feuer@gmail.com > mailto:david.feuer@gmail.com> wrote: > > The cost of allocating the extra pairs. > > On Tue, May 12, 2020, 5:11 AM Andreas Abel > mailto:andreas.abel@ifi.lmu.de> wrote: > > > I don't know how much that'll cost in practice. > > What costs are you worried about? > > On 2020-05-12 00:08, David Feuer wrote: > > In Data.List, we define > > > > transpose :: [[a]] -> [[a]] > > transpose [] = [] > > transpose ([] : xss) = transpose xss > > transpose ((x : xs) : xss) = (x : [h | (h : _) <- xss]) : > transpose (xs > > : [t | (_ : t) <- xss]) > > > > The potential difficulty is that we essentially mapMaybe > over the xss > > list twice in the third case. So we hang on to the heads > where we need > > the tails and the tails where we need the heads. We could > fix that with > > something like this: > > > > transpose ((x : xs) : xss) = (x : fronts) : transpose (xs > : rears) > > where > > (fronts, rears) = unzip [(h,t) | (h : t) <- xss] > > > > I don't know how much that'll cost in practice. > > > > _______________________________________________ > > Libraries mailing list > > Libraries@haskell.org mailto:Libraries@haskell.org > > http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries > > > > _______________________________________________ > Libraries mailing list > Libraries@haskell.org mailto:Libraries@haskell.org > http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries > > > _______________________________________________ > Libraries mailing list > Libraries@haskell.org > http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries >

Carter, imagine the list elements are thunks and that each of them, when forced, produces a large structure (e.g., a vector of length 10^7). Does that help your imagination? On Fri, May 15, 2020, 12:41 PM Carter Schonwald wrote:

David : call me unimaginative, but can you share an example that can trigger the space Leak ? At least conceptually I’m being a tad thick about it though I think I see what you’re pointing at.

On Fri, May 15, 2020 at 4:24 AM Ryan Reich wrote:

...

Never mind, that one is broken. I should probably not write these late in the evening.

On Thu, May 14, 2020 at 10:30 PM Ryan Reich wrote:

...

So it doesn't, but this one does (*):

--- transpose :: [[a]] -> [[a]] transpose [] = [] transpose [r] = map (:[]) r transpose (r1 : rrest) = zip' r1 (transpose rrest) where zip' [] bs = bs zip' (a : as) ~(b : bs) = (a : b) : zip' as bs

main = do mapM_ (print . transpose) [ [[1,2,3]], [[1,2,3],[4,5,6]], [[1,2,3],[4,5,6],[7,8,9]], [[10,11],[20],[],[30,31,32]] ] print $ take 10 $ transpose [[0 ..]] --print $ map (take 10) $ transpose (repeat [0]) print $ take 3 $ map (take 3) $ transpose (repeat [0..]) ---

It's true that this implementation will make the commented line diverge. *However*, (*) the stock implementation of transpose also diverges! Try it: head <$> transpose (repeat [0]) in ghci will print [0 and then loop. So I think this one is okay by that standard. Does it do better at allocation than the existing one or the one with unzip?

It's actually not even well-defined what the transpose would be if we allow infinitely many rows and also use the "condensing" property where the columns skip over nonexistent terms in the rows. How would you even prove that transpose (repeat [0]) has length 1? You'd have to rule out the existence of any second term in any of the infinitely many rows. Of course, in this example there is a fast way to do that, but the rows could be anything, so the problem is uncomputable. This logic is also why the final test above actually does terminate: because we find the requisite number of elements early on (in fact, instantly, since the rows are all infinite).

This actually raises the question of whether transpose even "should" care about infinitely many rows or columns (I know, the behavior is standardized; pretend we're discussing a new alternative transpose' that explicitly only does finite lists). </rant>

Ryan

On Thu, May 14, 2020 at 5:15 PM David Feuer wrote:

...

That doesn't look like it works on infinite lists.

On Thu, May 14, 2020, 8:09 PM Ryan Reich wrote:

...

Hopefully I'm not fooling myself...how about this?

--- transpose :: [[a]] -> [[a]] transpose [] = [] transpose (r1 : rrest) = zipWith' (:) (:[]) id r1 (transpose rrest)

zipWith' :: (a -> b -> c) -> (a -> c) -> (b -> c) -> ([a] -> [b] -> [c]) zipWith' _ _ fb [] bs = fb <$> bs zipWith' _ fa _ as [] = fa <$> as zipWith' f fa fb (a : as) (b : bs) = f a b : zipWith' f fa fb as bs

main = do mapM_ (print . transpose) [ [[1,2,3]], [[1,2,3],[4,5,6]], [[1,2,3],[4,5,6],[7,8,9]], [[10,11],[20],[],[30,31,32]] ] ---

I see the output: --- [[1],[2],[3]] [[1,4],[2,5],[3,6]] [[1,4,7],[2,5,8],[3,6,9]] [[10,20,30],[11,31],[32]] ---

which is correct (the last example is the one from the haddocks).

I was concerned that the definition of zipWith' (which is akin to the Map function unionWith) is not compatible with the build/fold fusion rule, but the implementation of zipWith itself is basically the same.

Ryan

On Thu, May 14, 2020 at 1:17 PM David Feuer wrote:

...

Right. I still think it might be the right thing to do, though. I'm not a big fan of general-purpose library functions that have any unnecessary memory leak hazard. The biggest counterargument is that real code is unlikely to run into that problem.

On Thu, May 14, 2020, 3:35 PM Ryan Reich wrote:

> My suggestion was much less sophisticated even than that, and is > basically what David answered with fusion. Also according to his answer, > the original code of transpose lacks the laziness that unzip's actual > implementation would provide. > > I think what that means is that his concern over allocating extra > pairs is about the ones created internally by unzip when it builds the lazy > heads-and-tails accessors. > > On Thu, May 14, 2020, 03:27 Andreas Abel > wrote: > >> On 2020-05-13 22:27, Ryan Reich wrote: >> > Why not just inline the definition of unzip and hand-optimize >> away the >> > pairs? >> >> Isn't this what the original code of transpose is doing? >> >> > On Tue, May 12, 2020, 10:24 David Feuer > > mailto:david.feuer@gmail.com> wrote: >> > >> > Also, the more eager list allocation can increase residency, >> but I >> > don't think it can cause a leak. >> > >> > On Tue, May 12, 2020, 9:48 AM David Feuer < >> david.feuer@gmail.com >> > mailto:david.feuer@gmail.com> wrote: >> > >> > The cost of allocating the extra pairs. >> > >> > On Tue, May 12, 2020, 5:11 AM Andreas Abel >> > mailto:andreas.abel@ifi.lmu.de> >> wrote: >> > >> > > I don't know how much that'll cost in practice. >> > >> > What costs are you worried about? >> > >> > On 2020-05-12 00:08, David Feuer wrote: >> > > In Data.List, we define >> > > >> > > transpose :: [[a]] -> [[a]] >> > > transpose [] = [] >> > > transpose ([] : xss) = transpose xss >> > > transpose ((x : xs) : xss) = (x : [h | (h : _) <- >> xss]) : >> > transpose (xs >> > > : [t | (_ : t) <- xss]) >> > > >> > > The potential difficulty is that we essentially >> mapMaybe >> > over the xss >> > > list twice in the third case. So we hang on to the >> heads >> > where we need >> > > the tails and the tails where we need the heads. >> We could >> > fix that with >> > > something like this: >> > > >> > > transpose ((x : xs) : xss) = (x : fronts) : >> transpose (xs >> > : rears) >> > > where >> > > (fronts, rears) = unzip [(h,t) | (h : t) <- >> xss] >> > > >> > > I don't know how much that'll cost in practice. >> > > >> > > _______________________________________________ >> > > Libraries mailing list >> > > Libraries@haskell.org > Libraries@haskell.org> >> > > >> http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries >> > > >> > >> > _______________________________________________ >> > Libraries mailing list >> > Libraries@haskell.org mailto:Libraries@haskell.org >> > http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries >> > >> > >> > _______________________________________________ >> > Libraries mailing list >> > Libraries@haskell.org >> > http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries >> > >> > _______________________________________________ Libraries mailing list Libraries@haskell.org http://mail.haskell.org/cgi-bin/mailman/listinfo/libraries