- Nhc-bugs - Haskell.org

building on Debian 3.0
by Richard Uhtenwoldt 19 Feb '03

19 Feb '03

The web site lists these two places to get Debian packages (.debs): ix86-Linux for Debian: http://people.debian.org/~bfulgham/nhc98 http://www-i2.informatik.rwth-aachen.de/Software/Haskell/debian/ --but neither link leads anywhere fruitful. So, I decide to build from nhc98src-1.14a.tar.gz on my Debian 3.0 ("Woody") machine, getting the following fatal error: sh /n/cs/nhc98-1.14a/targets/ix86-Linux/hmake3.config hmake-config: Warning: Config file not found: '/n/cs/nhc98-1.14a/lib/ix86-Linux/hmakerc' hmake-config: Starting new config from scratch. sh: /usr/bin/ghc-pkg-5.02.2: No such file or directory On my system, /usr/bin/ghc-pkg is a symlink to /etc/alternatives/ghc-pkg which is a symlink to /usr/lib/ghc-5.02.2/bin/ghc-pkg which is a symlink to ghc-pkg-5.02.2 (Yes, I do that many symlinks is stupid.) Please tell me the easiest way to get basic NHC installed.

4 3

Get money online!
by A friend! 19 Feb '03

19 Feb '03

Members earn $0.10 for every direct and indirect referral. This means that you do not only gain money for every person you refer, but you also get paid for the referrals referred by your referrals and then for their referrals and so on, 10 levels deep. The table on the right is an example which demonstrates how your earnings will accumulate. There is a single life-time membership fee of US $1.49. There are no other hidden fees. The payment of the life-time fee (US$1.49) is a membership requirement. It has to be paid immediately after registration whereupon your account will automatically be confirmed (after receipt of this payment). You can withdraw the profits from your account as soon as your balance is at least $1. It usually takes 48-72 hours to complete the withdawing procedure. http://www.goldendimes.com/affiliate/join.html?wtskin

1 0

Error when building nhc with cygwin and win2000
by Magnus Lindberg 13 Feb '03

13 Feb '03

Hello! I've tried to install nhc98 on win2000 using Cygwin. However, I get an error message (see the last rows in the first text extract below). I have tested to compile with both GHC and GCC but I always get the same error message. (I run configure with: `$ configure' and `$ configure --buildwith=gcc') Can anyone tell me what I am doing wrong / what the error is? I think that the heap profiling tools seem useful that's why I would like tor try nhc. Keen regards Magnus Lindberg `make' results in: .... make[1]: Entering directory `/cygdrive/f/Unex_progs/Haskell/nhc98src-1.14a/nhc98 -1.14a/src/prelude/ix86-CYGWIN_NT-5.0' rm -f *.hi rm -f DErrNo.hc rm -f /cygdrive/f/Unex_progs/Haskell/nhc98src-1.14a/nhc98-1.14a/targets/ix86 -CYG WIN_NT-5.0/obj/prelude/DErrNo/*.o *.o rm -f rm -f /cygdrive/f/Unex_progs/Haskell/nhc98src-1.14a/nhc98-1.14a/script/nhc98 -cpp -c + CTS -lib -redefine -CTS +RTS -H32M -RTS -o /cygdrive/f/Unex_progs/Haskell/nhc 98src-1.14a/nhc98-1.14a/targets/ix86-CYGWIN_NT-5.0/obj/prelude/DErrNo/ DErrNo.o D ErrNo.hs Signal 11 Signal 11 Signal 11 make[1]: *** [/cygdrive/f/Unex_progs/Haskell/nhc98src-1.14a/nhc98-1.14a/targets/ ix86-CYGWIN_NT-5.0/obj/prelude/DErrNo/DErrNo.o] Error 1 make[1]: Leaving directory `/cygdrive/f/Unex_progs/Haskell/nhc98src-1.14a/nhc98- 1.14a/src/prelude/ix86-CYGWIN_NT-5.0' make: *** [targets/ix86-CYGWIN_NT-5.0/compiler-gcc] Error 2 Magnus_Linbrg@LEOMAHEO /cygdrive/f/Unex_progs/Haskell/nhc98src-1.14a/nhc98-1.1 4a $ / When I then run `make install' some files are not found (well, not too strange since `make' didn't work?) : Executables and object lib files go into: /usr/local/lib/nhc98/ix86-CYGWIN_NT-5.0 (created) /usr/local/lib/hmake/ix86-CYGWIN_NT-5.0 (created) ./ ... ./Prelude.a ./Runtime.a mv: cannot stat `MkProg.exe': No such file or directory mv: cannot stat `Older.exe': No such file or directory mv: cannot stat `hmakerc': No such file or directory mv: cannot stat `HInteractive.exe': No such file or directory mv: cannot stat `MkConfig.exe': No such file or directory Adjusting... hmakerc exec: /cygdrive/f/Unex_progs/Haskell/nhc98src-1.14a/nhc98-1.14a/lib/ix86-CYG WIN_ NT-5.0/MkConfig: not found exec: /cygdrive/f/Unex_progs/Haskell/nhc98src-1.14a/nhc98-1.14a/lib/ix86-CYG WIN_ NT-5.0/MkConfig: not found (This error message is harmless) exec: /cygdrive/f/Unex_progs/Haskell/nhc98src-1.14a/nhc98-1.14a/lib/ix86-CYG WIN_ NT-5.0/MkConfig: not found exec: /cygdrive/f/Unex_progs/Haskell/nhc98src-1.14a/nhc98-1.14a/lib/ix86-CYG WIN_ NT-5.0/MkConfig: not found hood.jar And when I later run nhc98: $ nhc98 Example.hs Signal 11 Signal 11 Signal 11 Or hmake: $ hmake Example.hs /usr/local/lib/hmake/ix86-CYGWIN_NT-5.0/MkProg: not found rm: cannot remove `/cygdrive/c/DOCUME~1/MAGNUS~1/LOKALA~1/Temp/hmake1376': No su ch file or directory Stop - hmake dependency error.

2 1

Re: [nhc-bugs] Compiling on SunOS 5.8 x86.
by Malcolm Wallace 07 Feb '03

07 Feb '03

I'm forwarding Marcus Gabriel's message about gcc-3.2 on Solaris, in case it is useful to others. ---- Begin forwarded message: From: "Marcus D. Gabriel" <mdg(a)wanadoo.fr> Thank you for the quick reply. I received also the patch; thank you for the quick patch. It worked on SunOS 5.8 with gcc 3.2 compiling nhc98 1.14a under i386 At work, I did _not_ have problems with SunOS 5.7, 5.8, 5.9 with gcc 3.2 compiling nhc98 1.14a under sparc Cheers, - Marcus P.S. First time something called a mangler fix a problem for me ;). ----

1 0

Re: [nhc-bugs] building on Debian 3.0
by Brent Fulgham 07 Feb '03

07 Feb '03

Richard, I'm cc'ing the nhc-bugs list because I think my answer might be helpful to others. Apologies for this breach of protocol: On Thu, 06 Feb 2003 23:07:58 -0800 Richard Uhtenwoldt <ru(a)river.org> wrote: > Brent Fulgham writes: > > >ftp://ftp.debian.org/debian/pool/main/n/nhc98/nhc98_1.4-8_i386.deb > >ftp://ftp.debian.org/debian/pool/main/n/nhc98/nhc98-doc_1.4-8_all.deb > >ftp://ftp.debian.org/debian/pool/main/h/hmake/hmake_3.06-2_i386.deb > >ftp://ftp.debian.org/debian/pool/main/h/hat/hat_2.00-5_i386.deb > > >Or, you can adjust your /etc/apt/sources.lst to point to the "testing" > >branch of Debian and use apt-get to install and handle dependencies > >for you. > > I see from dkpg that the nhc98 binary package requires a newer libc6, > installation of which caused dpkg to want to de-install the old libc6, > even tho the minor version number's different. I assume upgrading the > libc6 would cause the many packages that depend on libc6 to need > upgrading, too. (or is that a wrong assumption?). [ ... snip ... ] > my plan is to try to work around the build bug in the non-debianized > source tarball, as the less-disruptive way to get nhc on my system > --unless you've a better idea. > I belive I do. If you visit each of the locations I gave, you can also get the Debian source files: ftp://ftp.debian.org/debian/pool/main/n/nhc98/nhc98_1.14-8.dsc ftp://ftp.debian.org/debian/pool/main/n/nhc98/nhc98_1.14-8.diff.gz ftp://ftp.debian.org/debian/pool/main/n/nhc98/nhc98_1.14.orig.tar.gz ftp://ftp.debian.org/debian/pool/main/h/hmake/hmake_3.06-2.dsc ftp://ftp.debian.org/debian/pool/main/h/hmake/hmake_3.06-2.diff.gz ftp://ftp.debian.org/debian/pool/main/h/hmake/hmake_3.06.orig.tar.gz ftp://ftp.debian.org/debian/pool/main/h/hat/hat_2.00-5.dsc ftp://ftp.debian.org/debian/pool/main/h/hat/hat_2.00-5.diff.gz ftp://ftp.debian.org/debian/pool/main/h/hat/hat_2.00.orig.tar.gz Download all 9 of these files (or just the first 6 if you only want to get nhc98 and hmake). You can then build the exact packages I provide to the main distribution, except using your library versions. This will insure no incompatibilities with your system setup, but will also put the package in conformance with the Debian set-up, so you don't have to worry about future upgrades, etc. Just do the following (after making sure you have installed the "dpkg-dev" package): bash# dpkg-source -x nhc98_1.14-8.dsc bash# cd nhc98-1.14 bash# dpkg-buildpackage -rfakeroot -or- bash# sudo dpkg-buildpackage You may get some errors at this point complaining about some tools you may not have installed. Just get them from your Debian CD-ROM or elsewhere and continue the build. If it complains about Java, you can override with the "-d" command: dpkg-buildpackage -d And it will attempt to build without it. Just repeat this for the other packages you are interested in. I think this is a good approach, since the packages are known to build properly (because the autobuilders for other architectures have to use them), so this is probably the least-effort way to get a build for your system. Good luck and have fun! -Brent

1 0

Build problem with m68K architecture
by Brent Fulgham 06 Feb '03

06 Feb '03

The m68K architecture (pre-powerpc apple computers) won't build. This problem has been around since nhc98-1.10: > Automatic build of nhc98_1.10-3 on ipmsun1 by sbuild/m68k 1.159 > Build started at 20020212-0953 > ****************************************************************************** [...] > gcc -c -I../Kernel -I/build/buildd/nhc98-1.10/include -O3 -o /build/buildd/nhc98-1.10/targets/m68k-Linux/obj/runtime/Integer/mpn_div.o mpn_div.c > mpn_div.c: In function `_mpn_div': > mpn_div.c:136: `asm' operand requires impossible reload > make[3]: *** [/build/buildd/nhc98-1.10/targets/m68k-Linux/obj/runtime/Integer/mpn_div.o] Error 1 > make[3]: Leaving directory `/build/buildd/nhc98-1.10/src/runtime/Integer' > make[2]: *** [afile] Error 2 > make[2]: Leaving directory `/build/buildd/nhc98-1.10/src/runtime' > make[1]: *** [targets/m68k-Linux/runtime] Error 2 > make[1]: Leaving directory `/build/buildd/nhc98-1.10' > make: *** [build-stamp] Error 2 > ****************************************************************************** > Build finished at 20020212-1005 > FAILED [dpkg-buildpackage died] > ------------------------------------------------------------------------------ But continues through today: > Automatic build of nhc98_1.10-3 on ipmsun1 by sbuild/m68k 1.159 > Build started at 20020212-0953 > ****************************************************************************** [...] > gcc -c -I../Kernel -I/build/buildd/nhc98-1.10/include -O3 -o /build/buildd/nhc98-1.10/targets/m68k-Linux/obj/runtime/Integer/mpn_div.o mpn_div.c > mpn_div.c: In function `_mpn_div': > mpn_div.c:136: `asm' operand requires impossible reload > make[3]: *** [/build/buildd/nhc98-1.10/targets/m68k-Linux/obj/runtime/Integer/mpn_div.o] Error 1 > make[3]: Leaving directory `/build/buildd/nhc98-1.10/src/runtime/Integer' > make[2]: *** [afile] Error 2 > make[2]: Leaving directory `/build/buildd/nhc98-1.10/src/runtime' > make[1]: *** [targets/m68k-Linux/runtime] Error 2 > make[1]: Leaving directory `/build/buildd/nhc98-1.10' > make: *** [build-stamp] Error 2 > ****************************************************************************** > Build finished at 20020212-1005 > FAILED [dpkg-buildpackage died] > ------------------------------------------------------------------------------ Any ideas on how to correct? -Brent

2 1

bugfix for gcc-3.x
by Malcolm Wallace 05 Feb '03

05 Feb '03

To any users of nhc98 who have reported faults when trying to build or use the compiler in conjuction with gcc-3.x. We have finally found the cause of the fault, and a fix. A source-code patch for nhc98-1.14 is attached, and is also available for download from the website. Technical details: It appears that gcc has changed the way it aligns statically declared arrays of pointers, from 4-byte boundaries in (gcc-2.x) to 32-byte boundaries (in gcc-3.x). Unfortunately, nhc98 was relying very heavily on the 4-byte alignment. As it turns out, the alignment can be restored to 4-byte boundaries without any ill effects, by using an "evil mangler"(TM) on the assembly code. Regards, Malcolm P.S. The phrase "evil mangler" is trademark of GHC. :-)

1 0

Compiling on SunOS 5.8 x86.
by Marcus D. Gabriel 05 Feb '03

05 Feb '03

I am boot-strapping on SunOS 5.8, i386, nhc98 1.14a with no Haskell compiler available. The nhc98comp command yields a core on a signal 6 and 11. Before I investiage further, is nhc98 1.14a known to build for SunOS 5.8 x86 or are there any known problems with x86 or SunOS 5.8, 5.9? Thanks in advance, - Marcus -- Marcus D. Gabriel, Ph.D. Email: mdg(a)wanadoo.fr 213 ter, rue de Mulhouse Fax: +33.3.89.69.05.08 F68300 Saint Louis FRANCE

2 1

Own your Hong Kong Fax Line
by sales＠mbfax.com 30 Jan '03

30 Jan '03

We found your company on www.cs.york.ac.uk's website and believe that our Hong Kong Fax Line service will assist your company to promote your products and services in Hong Kong. You will have your own fax number in Hong Kong to receive faxes and all faxes received will be converted into image files and forwarded to your email address. It is just like you have a virtual office in Hong Kong. The monthly service charge is US$20.00 for unlimited fax receiving plus 200 free pages of fax sending to Hong Kong every month. Details can be found on http://www.mbfax.com/hk-faxline.html or email to info(a)mbfax.com Man Bond Communications Limited Phone : 852-2780-3257 Fax : 852-2385-2631 Webpage: http://www.mbfax.com Block F1, 13/F., Tuen Mun Industrial Centre No. 76, Pui To Road, Tuen Mun Hong Kong ********************************************************************* If you wish to be removed from our list, please return our email with Removal at the Subject: line. *********************************************************************

1 0

nhc98 and Hat
by Kate Krastev 21 Jan '03

21 Jan '03

Hi there, I am using nhc98 (installed in my own directory) and just compiled Hat separately I try to run Hat with hmake -hat hello but gives me : Warning: -package hat library not found. (tried -I and -P options but did not help) What have I done wrong? Thanks in advance, Kate Krastev -- Kate Krastev PhD Student Computing Department Macquarie University Phone: (02) 9850 6345

1 0