March 2010 - xmonad - Haskell.org

Issue 366 in xmonad: XMonad.Layout.NoFrillsDecoration depends on SimpleDecoration
by codesite-noreply＠google.com 29 Sep '10

29 Sep '10

Status: New Owner: ---- New issue 366 by j...(a)kitenet.net: XMonad.Layout.NoFrillsDecoration depends on SimpleDecoration http://code.google.com/p/xmonad/issues/detail?id=366 What steps will reproduce the problem? 1.import XMonad.Layout.NoFrillsDecoration 2.do not import XMonad.Layout.SimpleDecoration 3. What is the expected output? What do you see instead? xmonad.hs:41:10: Not in scope: `defaultTheme' xmonad.hs:42:4: Not in scope: `activeColor' xmonad.hs:43:4: Not in scope: `inactiveColor' xmonad.hs:44:4: Not in scope: `activeBorderColor' xmonad.hs:45:4: Not in scope: `inactiveBorderColor' Etc. This goes away if SimpleDecoration is also imported. What version of the product are you using? On what operating system? 0.9 Are you using an xmonad.hs? Please attach it and the output of "xmonad --recompile". Please provide any additional information below. -- You received this message because you are listed in the owner or CC fields of this issue, or because you starred this issue. You may adjust your issue notification preferences at: http://code.google.com/hosting/settings

1 3

Re: Issue 311 in xmonad: using noBorders on tabbed layout freezes tab bar on workspace change
by codesite-noreply＠google.com 12 Sep '10

12 Sep '10

Updates: Status: Accepted Labels: Type-Defect Component-Contrib Comment #5 on issue 311 by byorgey: using noBorders on tabbed layout freezes tab bar on workspace change http://code.google.com/p/xmonad/issues/detail?id=311 (No comment was entered for this change.) -- You received this message because you are listed in the owner or CC fields of this issue, or because you starred this issue. You may adjust your issue notification preferences at: http://code.google.com/hosting/settings

1 2

Issue 336 in xmonad: xmonad won't start: Irrefutable pattern failed for pattern (Data.Maybe.Just nbc_)
by codesite-noreply＠google.com 26 Aug '10

26 Aug '10

Status: New Owner: ---- New issue 336 by flazzarino: xmonad won't start: Irrefutable pattern failed for pattern (Data.Maybe.Just nbc_) http://code.google.com/p/xmonad/issues/detail?id=336 What steps will reproduce the problem? 1. last line of ~/.xinitrc: exec /Users/franco/.cabal/bin/xmonad What is the expected output? What do you see instead? I expect to have xmonad launch but i get this error in console 11/13/09 2:36:51 PM org.x.startx[7572] xmonad-i386-darwin: XMonad/Main.hsc:(82,14)-(84,41): Irrefutable pattern failed for pattern (Data.Maybe.Just nbc_) What version of the product are you using? On what operating system? xmonad 0.9 (installed via cabal) ghc-version (6.10.4) installed via the package OSX 10.6.2 (Snow Leopard) Are you using an xmonad.hs? Please attach it and the output of "xmonad --recompile". import XMonad main = xmonad defaultConfig #no output Please provide any additional information below. on a mailing list i've seen hints that X cannot support the colors gray and red but i'm using a very stock snow leopard X11, only fullscreen is turned on -- You received this message because you are listed in the owner or CC fields of this issue, or because you starred this issue. You may adjust your issue notification preferences at: http://code.google.com/hosting/settings

1 10

Issue 382 in xmonad: fontforge should by default open stacked
by codesite-noreply＠google.com 26 Aug '10

26 Aug '10

Status: New Owner: ---- New issue 382 by artistenator: fontforge should by default open stacked http://code.google.com/p/xmonad/issues/detail?id=382 What steps will reproduce the problem? 1. open up fontforge 2. 3. What is the expected output? What do you see instead? gimp automatically opens in stacking mode, as that is gimp's natural environment. fontforge, which has a similar interface, should too. instead xmonad tiles it. Please use labels and text to provide additional information. If this error is due to a module from XMonadContrib, please tag this issue with 'Component-Contrib' below. -- You received this message because you are listed in the owner or CC fields of this issue, or because you starred this issue. You may adjust your issue notification preferences at: http://code.google.com/hosting/settings

3 5

Issue 349 in xmonad: Chromium gives BadWindow (invalid Window parameter)
by codesite-noreply＠google.com 02 Aug '10

02 Aug '10

Status: New Owner: ---- New issue 349 by ninternity: Chromium gives BadWindow (invalid Window parameter) http://code.google.com/p/xmonad/issues/detail?id=349 What steps will reproduce the problem? 1. Using the Chromium package, "chromium-browser" What is the expected output? A running chromium instance. What do you see instead? The program 'chromium-browser' received an X Window System error. This probably reflects a bug in the program. The error was 'BadWindow (invalid Window parameter)'. (Details: serial 116 error_code 3 request_code 20 minor_code 0) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) What version of the product are you using? On what operating system? xmonad 0.9, installed from Hackage Xubuntu 9.10 Are you using an xmonad.hs? Please attach it and the output of "xmonad --recompile". Please provide any additional information below. Error does not happen when using xfce + Xubuntu 9.10, nor in xmonad 0.9 + Xubuntu 9.04. Chromium version: 4.0.267.0~svn20091208r34059-0ubuntu1~ucd1~karmic Attachments: xmonad.hs 1.6 KB xmonad_recompile_out 238 bytes -- You received this message because you are listed in the owner or CC fields of this issue, or because you starred this issue. You may adjust your issue notification preferences at: http://code.google.com/hosting/settings

1 1

Issue 333 in xmonad: mplayer doesn't go fullscreen
by codesite-noreply＠google.com 27 Jul '10

27 Jul '10

Status: New Owner: ---- New issue 333 by polux2001: mplayer doesn't go fullscreen http://code.google.com/p/xmonad/issues/detail?id=333 What steps will reproduce the problem? 1. install ubuntu 9.10 2. cabal install xmonad 3. mplayer somevideo 4. press F What is the expected output? What do you see instead? Nothing happens. This doesn't occur with other WM (metacity). Are you using an xmonad.hs? Please attach it and the output of "xmonad --recompile". I'm using a customized xmonad.hs but the problem occurs with Config.hs found in he distribution. -- You received this message because you are listed in the owner or CC fields of this issue, or because you starred this issue. You may adjust your issue notification preferences at: http://code.google.com/hosting/settings

1 13

Issue 347 in xmonad: Feature request: Adding new Topics as you go
by codesite-noreply＠google.com 21 May '10

21 May '10

Status: New Owner: ---- New issue 347 by quesel: Feature request: Adding new Topics as you go http://code.google.com/p/xmonad/issues/detail?id=347 Hi, it would be a nice feature if one would be able to add new topics on the fly. I have a static config containing lots of topics, but sometimes I have a task that requires a new topic and I dont want to add it to my config but just add it temporarily. Therefore, it would be nice, if there was a way to easily combine X.A.TopicSpaces with X.A.DynamicWorkspaces and X.Prompt. Something like a keybind that pops-up two prompts, one for the topic name and one for the action and then creates this new topic, and one for deleting topics... Best Regards, Jan -- You received this message because you are listed in the owner or CC fields of this issue, or because you starred this issue. You may adjust your issue notification preferences at: http://code.google.com/hosting/settings

1 4

darcs patch: X.A.TopicSpace: new viewMethod field
by Brent Yorgey 20 May '10

20 May '10

I've attached a small patch which adds a 'viewMethod' field to TopicSpace configs, allowing the user to choose what method (usually view or greedyView) is used to view workspaces. This will not break any configs (except for those silly enough to use an explicit TopicConfig constructor instead of overriding fields in the default config record) since the default is the same as the old behavior. -Brent

4 6

Issue 376 in xmonad: TwinView issues
by codesite-noreply＠google.com 12 May '10

12 May '10

Status: New Owner: ---- New issue 376 by dripstone.blendercn: TwinView issues http://code.google.com/p/xmonad/issues/detail?id=376 What steps will reproduce the problem? 1. Enable Nvidia TwinView 2. Put some windows on main screen, and some on another screen 3. Switch between different workspaces using mod 1, mod 2 ... What is the expected output? What do you see instead? It is easy to get windows messed up. A window which should show on main screen can jump to another screen. What version of the product are you using? On what operating system? 0.9 -- You received this message because you are listed in the owner or CC fields of this issue, or because you starred this issue. You may adjust your issue notification preferences at: http://code.google.com/hosting/settings

1 15

darcs patch: Add a way to update the modifier in X.L.LayoutModifier
by Daniel Schoepe 05 May '10

05 May '10

Sat Aug 22 23:39:58 CEST 2009 Daniel Schoepe <daniel.schoepe(a)gmail.com> * Add a way to update the modifier in X.L.LayoutModifier This patch adds the possibility to update the state of a layout modifier when modifying the underlying layout before it is run(i.e. using modifyLayout). The modified state is also passed to the subsequent call of redoLayout, whose return takes precedence if both functions return modified states of the layout modifier.

6 9