- xmonad - Haskell.org

Issue 599 in xmonad: documentation on building xmonad is missing
by codesite-noreply＠google.com 21 Apr '15

21 Apr '15

Status: New Owner: ---- New issue 599 by Ian...@gmail.com: documentation on building xmonad is missing https://code.google.com/p/xmonad/issues/detail?id=599 What steps will reproduce the problem? 1. http://xmonad.org/ 2. http://xmonad.org/download.html 3. run darcs get commands 4. http://xmonad.org/intro.html 5. This only explains how to build sources from hackage. 6. Look in the README file of the darcs sources. 7. Same as #5, except it also says how to install from a tarbal from http://code.haskell.org Also in the README is "Building: Building is quite straightforward" ... It then says how to install dependencies, then skips straight to running xmonad without actually saying how to build. -- You received this message because this project is configured to send all issue notifications to this address. You may adjust your notification preferences at: https://code.google.com/hosting/settings

1 4

Issue 600 in xmonad: conflicting install instructions
by codesite-noreply＠google.com 21 Apr '15

21 Apr '15

Status: New Owner: ---- New issue 600 by Ian...@gmail.com: conflicting install instructions https://code.google.com/p/xmonad/issues/detail?id=600 What steps will reproduce the problem? 1. http://xmonad.org 2. follow link to http://xmonad.org/download.html 3. read: cabal install http://code.haskell.org/xmonad/xmonad.tar.gz 4. follow link to http://xmonad.org/intro.html 5. read conflicting instruction: cabal install xmonad Let's at least have a consistently documented and supported way to build, especially since building xmonad is quite prone to being broken in different circumstances. -- You received this message because this project is configured to send all issue notifications to this address. You may adjust your notification preferences at: https://code.google.com/hosting/settings

1 4

Issue 601 in xmonad: xmonad-contrib fails to build with cabal install
by codesite-noreply＠google.com 20 Apr '15

20 Apr '15

Status: New Owner: ---- New issue 601 by Ian...@gmail.com: xmonad-contrib fails to build with cabal install https://code.google.com/p/xmonad/issues/detail?id=601 What steps will reproduce the problem? 1. cabal install xmonad 2. cabal install xmonad-contrib Building xmonad-contrib-0.11.4... Preprocessing library xmonad-contrib-0.11.4... [ 1 of 226] Compiling XMonad.Util.StringProp ( XMonad/Util/StringProp.hs, dist/dist-sandbox-bce91598/build/XMonad/Util/StringProp.o ) [ 2 of 226] Compiling XMonad.Util.Replace ( XMonad/Util/Replace.hs, dist/dist-sandbox-bce91598/build/XMonad/Util/Replace.o ) [ 3 of 226] Compiling XMonad.Util.CustomKeys ( XMonad/Util/CustomKeys.hs, dist/dist-sandbox-bce91598/build/XMonad/Util/CustomKeys.o ) [ 4 of 226] Compiling XMonad.Layout.ThreeColumns ( XMonad/Layout/ThreeColumns.hs, dist/dist-sandbox-bce91598/build/XMonad/Layout/ThreeColumns.o ) [ 5 of 226] Compiling XMonad.Layout.StackTile ( XMonad/Layout/StackTile.hs, dist/dist-sandbox-bce91598/build/XMonad/Layout/StackTile.o ) [ 6 of 226] Compiling XMonad.Layout.Spiral ( XMonad/Layout/Spiral.hs, dist/dist-sandbox-bce91598/build/XMonad/Layout/Spiral.o ) [ 7 of 226] Compiling XMonad.Layout.Roledex ( XMonad/Layout/Roledex.hs, dist/dist-sandbox-bce91598/build/XMonad/Layout/Roledex.o ) [ 8 of 226] Compiling XMonad.Layout.ResizableTile ( XMonad/Layout/ResizableTile.hs, dist/dist-sandbox-bce91598/build/XMonad/Layout/ResizableTile.o ) [ 9 of 226] Compiling XMonad.Layout.OneBig ( XMonad/Layout/OneBig.hs, dist/dist-sandbox-bce91598/build/XMonad/Layout/OneBig.o ) [ 10 of 226] Compiling XMonad.Layout.MultiToggle ( XMonad/Layout/MultiToggle.hs, dist/dist-sandbox-bce91598/build/XMonad/Layout/MultiToggle.o ) [ 11 of 226] Compiling XMonad.Layout.MultiColumns ( XMonad/Layout/MultiColumns.hs, dist/dist-sandbox-bce91598/build/XMonad/Layout/MultiColumns.o ) [ 12 of 226] Compiling XMonad.Layout.MosaicAlt ( XMonad/Layout/MosaicAlt.hs, dist/dist-sandbox-bce91598/build/XMonad/Layout/MosaicAlt.o ) [ 13 of 226] Compiling XMonad.Layout.Mosaic ( XMonad/Layout/Mosaic.hs, dist/dist-sandbox-bce91598/build/XMonad/Layout/Mosaic.o ) [ 14 of 226] Compiling XMonad.Layout.LayoutBuilder ( XMonad/Layout/LayoutBuilder.hs, dist/dist-sandbox-bce91598/build/XMonad/Layout/LayoutBuilder.o ) [ 15 of 226] Compiling XMonad.Layout.HintedGrid ( XMonad/Layout/HintedGrid.hs, dist/dist-sandbox-bce91598/build/XMonad/Layout/HintedGrid.o ) [ 16 of 226] Compiling XMonad.Layout.Simplest ( XMonad/Layout/Simplest.hs, dist/dist-sandbox-bce91598/build/XMonad/Layout/Simplest.o ) [ 17 of 226] Compiling XMonad.Util.Stack ( XMonad/Util/Stack.hs, dist/dist-sandbox-bce91598/build/XMonad/Util/Stack.o ) [ 18 of 226] Compiling XMonad.Layout.Groups ( XMonad/Layout/Groups.hs, dist/dist-sandbox-bce91598/build/XMonad/Layout/Groups.o ) [ 19 of 226] Compiling XMonad.Layout.GridVariants ( XMonad/Layout/GridVariants.hs, dist/dist-sandbox-bce91598/build/XMonad/Layout/GridVariants.o ) [ 20 of 226] Compiling XMonad.Layout.Grid ( XMonad/Layout/Grid.hs, dist/dist-sandbox-bce91598/build/XMonad/Layout/Grid.o ) [ 21 of 226] Compiling XMonad.Layout.FixedColumn ( XMonad/Layout/FixedColumn.hs, dist/dist-sandbox-bce91598/build/XMonad/Layout/FixedColumn.o ) [ 22 of 226] Compiling XMonad.Layout.Dishes ( XMonad/Layout/Dishes.hs, dist/dist-sandbox-bce91598/build/XMonad/Layout/Dishes.o ) [ 23 of 226] Compiling XMonad.Util.Invisible ( XMonad/Util/Invisible.hs, dist/dist-sandbox-bce91598/build/XMonad/Util/Invisible.o ) XMonad/Util/Invisible.hs:31:59: Not in scope: type constructor or class ‘Applicative’ cabal: Error: some packages failed to install: xmonad-contrib-0.11.4 failed during the building phase. The exception was: ExitFailure 1 tried with ghc 7.8.3 and 7.8.4 cabal-install version 1.20.0.3 Tried to install to a sandbox -- You received this message because this project is configured to send all issue notifications to this address. You may adjust your notification preferences at: https://code.google.com/hosting/settings

1 2

WaylandMonad
by Auke Booij 18 Apr '15

18 Apr '15

A few weeks ago, I sent in a Google Summer of Code application for the haskell.org organization to work on porting Xmonad to wayland. The haskell organization has asked me to find a mentor for my application, which is the main reason for this email. If you are 1. an adult (sorry kids, Google's rules) 2. experienced with the Xmonad source 3. interested in wayland 4. willing to spend some time this summer on mentoring me then please contact me or someone in the haskell community to discuss mentoring options. The deadline for proposal matching is the 24th of April, so please contact me within this week (or better yet, as soon as possible). Without a mentor, I cannot get accepted for GSoC. I am already up to speed on wayland, so I think any Xmonad developer with some free time would make a great mentor. I attached my GSoC application below. Any comment on making Xmonad work on wayland is welcome as well. My current plan is to fork Xmonad and replace all the X bits by wayland bits - see also my proposal below. Greetings, Auke. Abstract === XMonad has, for a long time, been a flagship product of the Haskell community. With the arrival of wayland, XMonad is bound to look stuck in the past, and it's time for a port. Thanks to my previous work on wayland-related haskell libraries, this is now a viable project. Proposal === Background --- X11 has long been the de facto standard way for applications to display graphical user interfaces on the screen. For various reasons, a new project called wayland has been started, that can be seen as a successor of the X ecosystem, or at least can be seen as something that will play a very important role. Among others, GNOME is already working on wayland support, and plans to make it fully supported by version 3.18. This shows the relevance of wayland. XMonad is a flagship product of the Haskell community that is often cited as an example of the applicability of Haskell: its real world value. XMonad is a compositor (aka window manager) for the X11 ecosystem. In the new wayland ecosystem, one cannot reuse X11 compositors: they need to be partially rewritten. Goal --- I intend to fork XMonad and make it into a wayland compositor. Since the general ideas behind the X11 and the wayland protocol are not too different, this should be doable: we are still working with pointers and windows and input and output and renderings and messages. However, the wayland setup is technically very different from X11, since the central X11 server has been replaced by the compositor itself, and this means some very foundational code will need to be rewritten. I am the author of hayland [1], the haskell bindings to the wayland C library, as well as haskell-xkbcommon [2], the haskell bindings to the xkbcommon C library. With these two projects in place, the time is ripe for a wayland compositor written in haskell: the preliminaries are mostly there. As part of this project, I will have to invest some time in these two bindings projects as well (since they are quite new and have had little testing). For this reason, I intend to keep the scope of this project limited, and focus on getting some version of XMonad running on Wayland. I do not intend to change the architecture of XMonad, except wherever this would not require much more investment of time, and only as wished by the community. In other words: if you have anything that I should change about XMonad, and it is easy to switch to this new thing, then I'll use it. Any serious architectural changes will need to take place in a later stage. Deliverables --- - A working wayland compositor written in wayland, based on XMonad - Documentation of the source code (i.e. a technical document), user documentation (where this differs from XMonad) - Roadmap for further work: how should this project be continued into a next iteration of the XMonad project? Roadmap --- April/May: properly work my way through the XMonad source, and document things that will need changing June: Hack until it's working June+July: More hacking, also documentation August: Prepare a proper release, clean up code Bio --- I am currently studying for a Master of Logic in Amsterdam, and have a Master of Advanced Studies in Mathematics from Cambridge, UK, a BSc in Applied Mathematics and a BSc in Electrical Engineering (both from TU Delft). I have previously successfully finished GSoC (2010, with Gentoo) and SOCIS (in 2013, with PyBRML) (SOCIS is a GSoC-like program managed by the European Space Agency). I am the author of hayland [1], the haskell bindings to the wayland C library, as well as haskell-xkbcommon [2], the haskell bindings to the xkbcommon C library. The name of this fork is up for discussion. [1] https://github.com/tulcod/haskell-wayland [2] https://github.com/tulcod/haskell-xkbcommon

5 5

trying again: Dynamic properties patch
by Brandon Allbery 18 Apr '15

18 Apr '15

As an attachment this time, apparently gmail mangled the previous attempt(s). This patch somewhat hackily enables matching things such as browser windows where the title isn't set properly until "long" after the window is mapped, because of the way HTML+DOM allows it to be set dynamically by scripts or etc. -- brandon s allbery kf8nh sine nomine associates allbery.b(a)gmail.com ballbery(a)sinenomine.net unix, openafs, kerberos, infrastructure, xmonad http://sinenomine.net

2 1

[patch] Dynamic window property matching
by Brandon Allbery 18 Apr '15

18 Apr '15

1 patch for repository http://code.haskell.org/XMonadContrib: Fri Apr 10 15:34:49 EDT 2015 allbery.b(a)gmail.com * dynamicproperty Run a ManageHook from handleEventHook when a window property changes. You would use this to match e.g. browser windows whose title is not "final" until after the on-load hooks of the loaded document complete. New patches: [dynamicproperty allbery.b@gmail.com**20150410193449 Ignore-this: 7f58cbd7fadeffa96a3b635d14a51d4b Run a ManageHook from handleEventHook when a window property changes. You would use this to match e.g. browser windows whose title is not "final" until after the on-load hooks of the loaded document complete. ] { addfile ./XMonad/Hooks/DynamicProperty.hs hunk ./XMonad/Hooks/DynamicProperty.hs 1 +----------------------------------------------------------------------------- +-- | +-- Module : XMonad.Hooks.DynamicProperty +-- Copyright : (c) Brandon S Allbery, 2014 +-- License : BSD3-style (see LICENSE) +-- +-- Maintainer : allbery.b(a)gmail.com +-- Stability : unstable +-- Portability : not portable +-- +-- Module to apply a ManageHook to an already-mapped window when a property +-- changes. This would commonly be used to match browser windows by title, +-- since the final title will only be set after (a) the window is mapped, +-- (b) its document has been loaded, (c) all load-time scripts have run. +-- (Don't blame browsers for this; it's inherent in HTML and the DOM. And +-- changing title dynamically is explicitly permitted by ICCCM and EWMH; +-- you don't really want to have your editor window umapped/remapped to +-- show the current document and modified state in the titlebar, do you?) +-- +-- This is a handleEventHook that triggers on a PropertyChange event. It +-- currently ignores properties being removed, in part because you can't +-- do anything useful in a ManageHook involving nonexistence of a property. +-- +----------------------------------------------------------------------------- + +module XMonad.Hooks.DynamicProperty where + +import XMonad +import Data.Monoid +import Control.Applicative +import Control.Monad (when) + +-- | +-- Run a 'ManageHook' when a specific property is changed on a window. Note +-- that this will run on any window which changes the property, so you should +-- be very specific in your 'MansgeHook' matching (lots of windows change +-- their titles on the fly!): +-- +-- dynamicPropertyChange "WM_NAME" (className =? "Iceweasel" <&&> title =? "whatever" --> doShift "2") +-- +-- Note that the fixity of (-->) won't allow it to be mixed with ($), so you +-- can't use the obvious $ shorthand. +-- +-- > dynamicPropertyChange "WM_NAME" $ title =? "Foo" --> doFloat -- won't work! +-- +-- Consider instead phrasing it like any +-- other 'ManageHook': +-- +-- > , handleEventHook = dynamicPropertyChange "WM_NAME" myDynHook <+> handleEventHook baseConfig +-- > +-- > {- ... -} +-- > +-- > myDynHook = composeAll [...] +-- +dynamicPropertyChange :: String -> ManageHook -> Event -> X All +dynamicPropertyChange prop hook PropertyEvent { ev_window = w, ev_atom = a, ev_propstate = ps } = do + pa <- getAtom prop + when (ps == propertyNewValue && a == pa) $ do + g <- appEndo <$> userCodeDef (Endo id) (runQuery hook w) + windows g + return (All False) -- so anything else also processes it + +-- | A shorthand for the most common case, dynamic titles +dynamicTitle :: ManageHook -> Event -> X All +-- strictly, this should also check _NET_WM_NAME. practically, both will +-- change and each gets its own PropertyEvent, so we'd need to record that +-- we saw the event for that window and ignore the second one. Instead, just +-- trust that nobody sets only _NET_WM_NAME. (I'm sure this will prove false, +-- since there's always someone who can't bother being compliant.) +dynamicTitle = dynamicPropertyChange "WM_NAME" hunk ./xmonad-contrib.cabal 167 XMonad.Hooks.DynamicBars XMonad.Hooks.DynamicHooks XMonad.Hooks.DynamicLog + XMonad.Hooks.DynamicProperty XMonad.Hooks.DebugStack XMonad.Hooks.EwmhDesktops XMonad.Hooks.FadeInactive } Context: [minor doc fixes to X.C.Mate Daniel Wagner <me(a)dmwit.com>**20150330180752 Ignore-this: f35c2e5068adcf5a04727557078c8a6f ] [mate-comment-fixup allbery.b@gmail.com**20150330160523 Ignore-this: 687b5edc9220469f3e58abcfd4f6449c Correct the docstrings / comments in X.C.Mate, which still referenced gnomeConfig. Also update the session manager configuration to use dconf and a current (on Mint at least) path for the session config. ] [Add the ability to specify padding used with Maximize Peter Jones <pjones(a)devalot.com>**20150309232939 Ignore-this: 71ac5db4513da0b7a45eb82ec184f4e3 ] [Don't restore windows when changing workspaces Peter Jones <pjones(a)devalot.com>**20150310201709 Ignore-this: 5333205aa1a9fbc5c7844fad69561517 ] [New layout modifier: Hidden Peter Jones <pjones(a)devalot.com>**20150309223036 Ignore-this: 5534fe18e642d1691a9b3f99341e082d A layout modifer that is meant to work with the BinarySpacePartition layout. By removing windows from the window set and adding them back at a later time, you can move windows to a different branch of the BSP tree. ] [Fixes to warnings with BSP layout anton.pirogov@gmail.com**20150315100041 Ignore-this: 7642710fdb2a866150875f2d521d19fd ] [Improved BinarySpacePartition, added Equalize,Balance and FocusParent and mouse resize support anton.pirogov@gmail.com**20150312145220 Ignore-this: 31b5d7bf38e5b391df266906deb5e382 ] [New layout module X.L.Dwindle nzeh@cs.dal.ca**20150315130913 Ignore-this: a1507e9eda6e6cabd679c2c3b50d9a38 This adds three layouts: Spiral is a reimplementation of X.L.Spiral.spiral with a (to me) more intuitive splitting policy. Dwindle is similar but pushes the smaller windows into a corner rather than into the center. Squeeze just stacks windows vertically or horizontally using geometrically decreasing sizes. ] [address warnings in P.Pass Adam Vogt <vogt.adam(a)gmail.com>**20150313015636 Ignore-this: 52e03c09c4d5339085e0306044de8977 ] [X.L.AvoidFloats more useful default settings ankaan@gmail.com**20150310212022 Ignore-this: af6535bace9219619858751eeeff6520 Changed default settings with the simple layout modifier. Instead of asking for a bool indicating if all windows should be avoided, no such bool is asked for. No windows are avoided by default. I think this will be a more useful default setting since it would be annoying if dialogue windows are avoided. The same functionality is possible with the advanced constructor. This will be easier for new users. This will break configurations using the old module, but this will not be much of an issue since the module has not been added to the repo as of this writing. ] [Resolve minor conflict in xmonad-contrib.cabal ankaan@gmail.com**20150306175436 Ignore-this: 24ae68c08107a574199b055989d38347 ] [X.L.AvoidFloats, like avoidStruts but for floats ankaan@gmail.com**20150306171702 Ignore-this: 3722d7787dd2429313f92f85f3ae1251 Checks for floating windows within the layout area and finds a maximum area rectangle within that does not overlap with any of the floating windows. This rectangle is used for all non-floating windows. This new functionality introduced problems with the recommended configuration of one of my other modules (X.A.FloatSnap.) A new and more reliable method of distinguishing between clicks and drags where therefore introduced in the new module X.A.AfterDrag. This does not break any prior use of FloatSnap, but will require changes in configuration if used together with AvoidFloats. (This is mentioned in the docs for AvoidFloats and I recommend using the new configuration method even if AvoidFloats is not in use.) ] [X.L.LayoutBuilder place active on top ankaan@gmail.com**20150306164200 Ignore-this: 69d718d0d044ee59a877fa0e63edc474 Make sure that the active layout area is placed on top of all other areas when placing windows. This makes overlapping areas usable. ] [Add rearrangers to X.A.GridSelect Dmitri Iouchtchenko <johnnyspoon(a)gmail.com>**20130123044038 Ignore-this: ef0dc68e9b725953e69e7b039fe06e9a ] [Avoid repainting elements in X.A.GridSelect Dmitri Iouchtchenko <johnnyspoon(a)gmail.com>**20130123043850 Ignore-this: 8e926cebc8d458a06a05f7457ae40b68 ] [Give a name to the initial state in X.A.GridSelect Dmitri Iouchtchenko <johnnyspoon(a)gmail.com>**20130121061324 Ignore-this: 989ae20ccc3d5b1392f0694d5c62e759 ] [Add XMonad.Config.Bepo (Yorick Laupa) Adam Vogt <vogt.adam(a)gmail.com>**20150310214314 Ignore-this: 71dcf03f9ff80b645531004f95e9c600 ] [add instance Default WallpaperConf Adam Vogt <vogt.adam(a)gmail.com>**20150310214246 Ignore-this: 18e74f249b35726acd4b923ecce3085 ] [XMonad.Prompt.Pass: Handle hierachical password stores Joachim Breitner <mail(a)joachim-breitner.de>**20150218091816 Ignore-this: 2f0a02613780067d324b04a8cdb9c0ed pass stores its passwords in directories, so the contents of the directory store needs to be enumerated recursively. Alexander Sulfrian provided this patch on the mailinglist, which I tested (it works) and cleaned up slightly. ] [remove warnings and text dependency from H.WallpaperSetter Adam Vogt <vogt.adam(a)gmail.com>**20150310192933 Ignore-this: e637d782c13bed48bafbc1458b3f983f ] [Added the new hook WallpaperSetter anton.pirogov@gmail.com**20150228162335 Ignore-this: 7cbb2ab0d8f9f606f50253deebcf4163 ] [adjust an import to fix the build Adam Vogt <vogt.adam(a)gmail.com>**20150310182403 Ignore-this: 72f67dd2cb1cc6900269383124844c2b ] [merge conflicts in X.L.Spacing Adam Vogt <vogt.adam(a)gmail.com>**20150310182046 Ignore-this: f0830d6483d30d643e7e182e310ec042 I should have just applied Anton Pirogov March 4 patch. ] [Added messages to adjust the gap dynamically anton.pirogov@gmail.com**20150304082520 Ignore-this: 52b590c820db765796de41f38fffdf3c ] [X.L.Spacing needs -XPatternGuards now Adam Vogt <vogt.adam(a)gmail.com>**20150310181248 Ignore-this: d6b2b76fddbd9ad066e7cb39933f055a ] [add ConfirmPrompt (Antoine Beaupré) Adam Vogt <vogt.adam(a)gmail.com>**20150310181036 Ignore-this: 65d74f05e82c66a3ff4f021d19ceb626 ] [Added messages to adjust the gap dynamically anton.pirogov@gmail.com**20150303210143 Ignore-this: 891ca1ccca183d6af8e4aa4bf6d843fb ] [add another extension to actually fix the build with ghc-7.10-RC1 Adam Vogt <vogt.adam(a)gmail.com>**20150124111939 Ignore-this: 26d6f1b4cb6d573ccf49e6baeca853e4 ] [BinarySpacePartition downstream changes benweitzman@gmail.com**20141110202259 Ignore-this: 42ecc2b07388ba0c7b3eac980256c17b Pulled in changes from my repo for this layout on github ( https://github.com/benweitzman/BinarySpacePartition) Includes a new mode for resizing windows in a more intuitive way, also contains a bug fix that was preventing users from resiving a window up. Includes changes from github users egasimus (Adam Avramov) and SolitaryCipher (Nick) ] [add XF86AudioMicMute to EZConfig (#582) Adam Vogt <vogt.adam(a)gmail.com>**20141222045306 Ignore-this: 1c91505b303e53b94da624230b3c893c ] [Generalize new workspace addition functions to support arbitrary insertion. nrujac@gmail.com**20141219002309 Ignore-this: 9f8c14b5aa9d398b3f167da0af1a8650 The current DynamicWorkspaces module only supports adding new workspaces at the start of the list of workspaces. This means when binding workspaces to keys based on the position in the list, key bindings can change as workspaces are added in removed in a far more destructive way than necessary. Instead, supporting appending and arbitrary insertion allows the user to determine where the new workspace should be added. This patch is a straight generalization of the addHiddenWorkspace' function. Rather than always using `(:)` to insert the new workspace into the list of workspaces, this patches causes it to use an arbitrary list insertion function instead. A few new functions are added to prevent breakage of external code while exported functions are left unchanged. List of new functions: appendWorkspace appendWorkspacePrompt addWorkspaceAt addHiddenWorkspaceAt Existing functions were modified to call their generalized brethren where possible without changing functionality. This patch should not change behavior for any existing users of this module. ] [address another bitSize/finiteBitSize warning Adam Vogt <vogt.adam(a)gmail.com>**20141222033300 Ignore-this: 549e519d25080c77e605dc983f0d239e ] [X.L.Master: Add FixMaster layout modifier Anton Vorontsov <anton(a)enomsg.org>**20141220011339 Ignore-this: 82e9736853287f753248af41843ceb6b This layout modifier is useful for the case if you desire to add a master pane that has fixed width (it's fixed even if there is just one window opened). Especially nice feature if you don't want to have too wide terminal in a master pane. The layout is implemented as an addition to Master layout, so it reuses most of the code. ] [filepath dependency for P.Pass was left out Adam Vogt <vogt.adam(a)gmail.com>**20141221214129 Ignore-this: 98e63d7b17ac6ebabd8a6b081f5194a1 ] [remove unused imports Adam Vogt <vogt.adam(a)gmail.com>**20140815051234 Ignore-this: b2e5be31b70e6d31827e76bd8c00d200 ] [fix build with ghc-6.12 Adam Vogt <vogt.adam(a)gmail.com>**20140815051214 Ignore-this: d4c4da527db6c8affc151dc210631b85 ] [use FiniteBitSize with ghc >= 7.8 Adam Vogt <vogt.adam(a)gmail.com>**20140815051136 Ignore-this: 90f855fd72406fb3d2640a133d499188 ] [Layout.Spacing: Outer window edges now get as much spacing as inner ones Felix Crux <felixc(a)felixcrux.com>**20141219223646 Ignore-this: 61363e97939fe857876c8252ac5f0302 Layout.Spacing applies a customizable amount of space around the outside of each window. At window edges where two windows meet, the total distance between them is therefore twice the customized value (one space value from each window). At the edge of the screen, however, the spacing is only applied once. This results in uneven amounts of spacing and differently-sized gaps on the screen. This patch extends the Spacing layout to include a further gap all around the edge of the screen, thus making all spaces around windows equal in size. ] [add filepath package dependency needed by Prompt.Pass Adam Vogt <vogt.adam(a)gmail.com>**20140909145216 Ignore-this: 588ec76e7fccb4219361da7024c98db4 filepath comes with ghc, and it's used by xmonad-core anyways ] [X.C.Prime: doc tweaks Devin Mullins <devin.mullins(a)gmail.com>**20141002075939 Ignore-this: 20d6b829b810f48b5e4b4c161b39b312 ] [X.A.Navigation2D: add convenience functions for setting config & keybindings Devin Mullins <devin.mullins(a)gmail.com>**20141002075757 Ignore-this: ed01137f03a531f73315ed503d1eb6ef 1. Added 'additionalNav2DKeys' which adds keybindings for the cartesian product of direction keys and (modifier, action) pairs given. 2. Added 'navigation2D' which combines that with 'withNavigation2DConfig'. 3. Added 'additionalNav2DKeysP' and 'navigation2DP' which do the same, but use the 'additionalKeysP' syntax. ] [X.C.Prime: doc fixes Devin Mullins <devinmullins(a)gmail.com>**20141001075855 Ignore-this: dbbe00791b04df61dcd595c50333fba ] [X.C.Prime: add 'withScreens' and friends Devin Mullins <devinmullins(a)gmail.com>**20141001075250 Ignore-this: eba37b1ff3da265a4dcc509f538fce4d The screen equivalent of 'withWorkspaces' lets you more easily define keys that move/swap between screens. Also, rename wsKeyspecs to wsKeys, and make a couple of doc tweaks. ] [Implement proper handling of dynamically changing hostname Anton Vorontsov <anton(a)enomsg.org>**20140901072158 Ignore-this: 2aeac6d2161e666d40cda6a09f78b208 The module implements a proper way of finding out whether the window is remote or local. Just checking for a hostname and WM_CLIENT_MACHINE being equal is often not enough because the hostname is a changing subject (without any established notification mechanisms), and thus WM_CLIENT_MACHINE and the hostname can diverge even for a local window. This module solves the problem. As soon as there is a new window created, we check the hostname and WM_CLIENT_MACHINE, and then we cache the result into the XMONAD_REMOTE property. Notice that XMonad itself does not know anything about hostnames, nor does it have any dependency on Network.* modules. For this module it is not a problem: you can provide a mean to get the hostname through your config file (see usage). Or, if you don't like the hassle of handling dynamic hostnames (suppose your hostname never changes), it is also fine: this module will fallback to using environment variables. ] [Add Stoppable layout for power saving Anton Vorontsov <anton(a)enomsg.org>**20140901072141 Ignore-this: a52805d9f3095cd7af48507847ed2fe3 This module implements a special kind of layout modifier, which when applied to a layout, causes xmonad to stop all non-visible processes. In a way, this is a sledge-hammer for applications that drain power. For example, given a web browser on a stoppable workspace, once the workspace is hidden the web browser will be stopped. Note that the stopped application won't be able to communicate with X11 clipboard. For this, the module actually stops applications after a certain delay, giving a chance for a user to complete copy-paste sequence. By default, the delay equals to 15 seconds, it is configurable via 'Stoppable' constructor. The stoppable modifier prepends a mark (by default equals to "Stoppable") to the layout description (alternatively, you can choose your own mark and use it with 'Stoppable' constructor). The stoppable layout (identified by a mark) spans to multiple workspaces, letting you to create groups of stoppable workspaces that only stop processes when none of the workspaces are visible, and conversely, unfreezing all processes even if one of the stoppable workspaces are visible. To stop the process we use signals, which works for most cases. For processes that tinker with signal handling (debuggers), another (Linux-centric) approach may be used. See https://www.kernel.org/doc/Documentation/cgroups/freezer-subsystem.txt ] [X.C.Prime: doc changes Devin Mullins <devinmullins(a)gmail.com>**20140925203037 Ignore-this: 51204c1a9f2e6ed21228d2910417fd21 ] [X.C.Prime: add withWorkspaces et al. Devin Mullins <devinmullins(a)gmail.com>**20140925203034 Ignore-this: 65f691270110cc5de13c950d9dcb0c17 This allows easier configuration of workspaces and their keybindings. Required generalizing the 'Prime' type, so lots of other lines changed in rather trivial ways. ] [X.C.Prime: add ifThenElse binding Devin Mullins <devinmullins(a)gmail.com>**20140924191509 Ignore-this: ae775c418c27301b9c12d2a233502cec This is necessary for if-then-else support in the user's config. ] [X.C.Prime: doc fixes Devin Mullins <devinmullins(a)gmail.com>**20140915080601 Ignore-this: 15e3c445a99d3b2d3a235aa76119797 ] [X.C.Prime: fix 'def' hyperlink in doc Devin Mullins <devinmullins(a)gmail.com>**20140914075352 Ignore-this: a1de1d81a5f140ab7d90edbf393e9bda ] [XMonad.Config.Prime, a do-notation for config Devin Mullins <devinmullins(a)gmail.com>**20140914064828 Ignore-this: f7397aa6e6efe5d76acebfa22c567baa Note that the use of RebindableSyntax is because of the need to vary the layoutHook type throughout the config. The alternative, using the existential Layout type, was rejected because it required TemplateHaskell in order to look nice, and TemplateHaskell is not portable. I've tried to make a version of (>>) that also worked on normal monads, but have had no luck as of yet. Maybe some intrepid soul can add it later. ] [X.P.Shell: fix doc typo me@twifkak.com**20130317115516 Ignore-this: bdd385a9142ed039a917d135e76293fe ] [reverse workspaces, so that switching to a dynamic workspace group restores the focus to the screen that was focused at group creation time nwfilardo@gmail.com**20140913174118 Ignore-this: b74c02b1892159694827e35122c2d517 ] [add filepath dependency, needed by new X.P.Pass module me@twifkak.com**20140913070926 Ignore-this: fec97086c1e66cf8a036265bd1a970a8 ] [add-new-xmonad-prompt-pass eniotna.t@gmail.com**20140829131928 Ignore-this: 11e85dfe3d24cef88d8d89f4e7b1ec0b This module provides 3 <XMonad.Prompt> to ease passwords manipulation (generate, read, remove): - one to lookup passwords in the password-storage. - one to generate a password for a given password label that the user inputs. - one to delete a stored password for a given password label that the user inputs. All those prompts benefit from the completion system provided by the module <XMonad.Prompt>. The password store is setuped through an environment variable PASSWORD_STORE_DIR. If this is set, use the content of the variable. Otherwise, the password store is located on user's home @$HOME\/.password-store@. Source: - The password storage implementation is < http://git.zx2c4.com/password-store the password-store cli>. - Inspired from <http://babushk.in/posts/combining-xmonad-and-pass.html> ] [use Data.Map instead of Data.Map.Strict to support containers < 0.5 Adam Vogt <vogt.adam(a)gmail.com>**20140815043141 Ignore-this: 436d18657d8499f4ce57311e84503d9f ] [config-mate allbery.b@gmail.com**20140803020659 Ignore-this: d5de258c0a28cd5ba64a59cf37cd480a Initial support for the Mate desktop environment (http://mate-desktop.org) Based on existing Gnome 2 support, since Mate is a maintained fork of Gnome 2. ] [debug-managehook allbery.b@gmail.com**20140803020601 Ignore-this: 51f9255b496cca79e4a53e274c400ecc A set of hooks, and convenience combinators, to help with ManageHook debugging. Ordinary users may well want to use debugManageHookOn in normal configs, specifying a key sequence which can be pressed before running a command in order to capture debug information just for that command's main window. This is especially useful when trying to diagnose issues such as programs that do not play well with SpawnOn, or ManageHook matching on 'title' when the program does not set the window title until after it is mapped. ] [debug-debug allbery.b@gmail.com**20140803020530 Ignore-this: cbb2b1d99293e3a4d02a256c2733aeb0 Various fixes and enhancements to DebugWindow and DebugStack. ManageDebug requires these fixes, but some of them are significant even if not using ManageDebug. ] [derive Applicative instances to suppress AMP warning Adam Vogt <vogt.adam(a)gmail.com>**20140710163950 Ignore-this: c2110d07bccc61462c3fbf73c900aaa1 ] [clean up cabal file and drop support for base < 3 Adam Vogt <vogt.adam(a)gmail.com>**20140710013255 Ignore-this: 76b142e2b114604feac9b8e41cf71ab ] [add-duck-duck-go-search-engine eniotna.t@gmail.com**20140617174246 Ignore-this: 29bbfb2d07d9ddf36bf0268a4e255f81 ] [XSelection: getSelection: fix connection exhaustion bug (issue #573); include warning gwern@gwern.net**20140601025019 Ignore-this: add21190fc07338b243c2241cc746119 ] [Fix dbus-send call in XMonad.Config.Gnome md143rbh7f@gmail.com**20140129032114 Ignore-this: ed62458b55c8b34b77f73027eeee1a73 dbus-send --print-reply=string is invalid, but it was silently ignored until recently: http://cgit.freedesktop.org/dbus/dbus/commit/tools/dbus-send.c?id=c690ee435… I've changed XMonad.Config.Gnome to run --print-reply=literal, since that's what the old behavior was. ] [warning police (unused variables) Adam Vogt <vogt.adam(a)gmail.com>**20140505001242 Ignore-this: a15b4d844b1da4f1f1f9b6095c968705 ] [This patch makes the Ssh extension works with **user** arguments in ssh, .e.g ssh admin@localhost. linxray@gmail.com**20140504091120 Ignore-this: 297673e11d3049c4f127aac3e172d361 ] [remove trailing whitespace in L.BinarySpacePartition Adam Vogt <vogt.adam(a)gmail.com>**20140501011943 Ignore-this: 8dd677978992e0854801b8f254463dc2 ] [replace Bound with the equivalent Direction2D Adam Vogt <vogt.adam(a)gmail.com>**20140501011540 Ignore-this: b1f1c256aba07f70918fe1d693c8087b ] [remove unused extension in BSP Adam Vogt <vogt.adam(a)gmail.com>**20140501011455 Ignore-this: a4962486b2aa3980536bff19a537451e ] [Add BinarySpacePartition layout benweitzman@gmail.com**20140430205848 Ignore-this: a85d1dc51bf54c59ae2bd9d948cc1088 ] [X.Actions.DynamicWorkspaceGroups: export new function addRawWSGroup Brent Yorgey <byorgey(a)cis.upenn.edu>**20140428142901 Ignore-this: a487882c9571bf91ff921d6561bb4cc6 ] [Remove unneeded context with the IfMax layout instance Adam Vogt <vogt.adam(a)gmail.com>**20140422221105 Ignore-this: 3b8ac316f56df6a84420754db769fb0 Extra constraints on instances are about as useful as -XDataTypeContexts ] [Adding side tabs and replacing TabbarLocation with Direction2D. nrujac@gmail.com**20140219200811 Ignore-this: edabeec973b4e0d61515818367689843 ] [warning police Daniel Wagner <daniel(a)wagner-home.com>**20140316183747 Ignore-this: fd16435ccdd3fee8924723cc690cc239 ] [New module: XMonad.Util.WindowState Dmitry Bogatov <KAction(a)gnu.org>**20140218100229 Ignore-this: 14a6fa263c423cd8cca3b2645b3930d7 Save almost arbitary data per window ] [Add side tabs to the tabbed layout. nrujac@gmail.com**20140213215247 Ignore-this: f81bafe9cb75a30ed6bbbe68cf5d66c0 ] [SpawnNamedPipe hlint cleanup cwills.dev@gmail.com**20140202213613 Ignore-this: dbb68c4c5522026bd108d0158e747b48 ] [document and cleanup SpawnNamedPipe cwills.dev@gmail.com**20140202211000 Ignore-this: b264278f1f1ab1f18b37245a5ff33136 ] [Added SpawnNamedPipe cwills.dev@gmail.com**20140202143415 Ignore-this: 87797ffffc8d0fd088482bd0c5baf0e ] [Make commandToComplete in XMonad.Prompt.Shell complete last word md143rbh7f@gmail.com**20140130200050 Ignore-this: b0fe22fdd7b9409835fd0ca069f2e01a The following change from 2013-02-09 breaks shell completion for me: hunk ./XMonad/Prompt/Shell.hs 65 + commandToComplete _ c = c It seems to be passing the entire string into compgen in order to get the file completions, but it should only pass the last word. I propose reverting this change. Comments are appreciated. ] [expose and document X.L.IndependentScreens.marshallSort Daniel Wagner <daniel(a)wagner-home.com>**20140128212844 Ignore-this: 90c1437c6ffe1dbd8f4a4ed192097ec ] [ServerMode properly indent Adam Vogt <vogt.adam(a)gmail.com>**20131219201440 Ignore-this: 761b39c3e3c90b6123f068e8b1d34e5d ] [remove ServerMode tabs Adam Vogt <vogt.adam(a)gmail.com>**20131219201000 Ignore-this: f21448c248ec0ac289c309ed964ebcff ] [fix -Wall ServerMode Adam Vogt <vogt.adam(a)gmail.com>**20131219181030 Ignore-this: 708dd5fc60f43dee3d1da085002052f ] [documentation note that ServerMode is similar to wmctrl Adam Vogt <vogt.adam(a)gmail.com>**20131219180748 Ignore-this: 3215bdf1c698c798eca8ed7f62a0f591 ] [Generalized XMonad.Hooks.ServerMode polson2@hawk.iit.edu**20131216025100 Ignore-this: e58da3b168a1058f32982833ea25a739 ] [IfMax-Layout Ilya Portnov <portnov84(a)rambler.ru>**20131201072634 Ignore-this: dac53f2a0505e740f05fdf03f1db0c21 This adds a new ("conditional") layout, IfMax, which simply runs one layout, if there are <= N windows, and else runs another layout. ] [fix UrgencyHook and add filterUrgencyHook Adam Vogt <vogt.adam(a)gmail.com>**20130924224738 Ignore-this: 3b7c62275701e6758397977c5c09b744 ] [export XMonad.Hooks.UrgencyHook.clearUrgency (issue 533) Adam Vogt <vogt.adam(a)gmail.com>**20130923031349 Ignore-this: dafe5763d9abcfa606f5c1a8cf5c57d6 ] [minor documentation fix: manageDocks doesn't do anything with struts, so don't claim it does Daniel Wagner <daniel(a)wagner-home.com>**20130814125106 Ignore-this: a2610d6c1318ac0977abfc21d1b91632 ] [don't pretend to be LG3D in X.C.Dmwit because this confuses modern GTK Daniel Wagner <daniel(a)wagner-home.com>**20130813211636 Ignore-this: 8f728dc1b4bf5e472d99419cc5920e51 ] [XMonad.Actions.UpdatePointer: generalise updatePointer Liyang HU <git(a)liyang.hu>**20130730071007 Ignore-this: 3374a62b6c63dcc152dbf843cd0577f0 ] [XMonad.Actions.UpdatePointer: document TowardsCentre Liyang HU <git(a)liyang.hu>**20130730053746 Ignore-this: 2d684b12e4fff0ebec254bea4a4546a3 ] [Haddock formatting in H.Minimize Adam Vogt <vogt.adam(a)gmail.com>**20130723155658 Ignore-this: 5db3186a51dec58f78954466ded339cb ] [Bump version (and xmonad dependency) to 0.12 Adam Vogt <vogt.adam(a)gmail.com>**20130720205857 Ignore-this: ce165178ca916223501f266339f1de39 This makes a breakage due to missing patches in core a bit more obvious. Previously you would have a build failure regarding some missing identifiers (def re-exported by XMonad from Data.Default), while after applying this patch it will be clear that xmonad-core needs to be updated. ] [Fix issue 551 by also getting manpath without -g flag. Adam Vogt <vogt.adam(a)gmail.com>**20130716030536 Ignore-this: ded2d51eb7b7697c0fdfaa8158d612df Instead of taking Ondrej's approach of figuring out which man (man-db or http://primates.ximian.com/~flucifredi/man/) is used by the system, just try both sets of flags. ] [Escape dzen markup and remove xmobar tags from window titles by default. Adam Vogt <vogt.adam(a)gmail.com>**20130708144813 Ignore-this: cf56bff752fbf78ea06d5c0cb755f615 The issue was that window titles, such as those set by, for example a browser, could set the window title to display something like <action=malicious shell command>normal title</action> Which could be executed by xmobar (or dzen). This adds a ppTitleSanitize which does the above functions. This way when users override ppTitle, the benefits are not lost. Thanks to Raúl Benencia and Joachim Breitner for bringing this to my attention. ] [DynamicBars-use-ExtensibleState gopsychonauts@gmail.com**20130618074755 Ignore-this: afacba51af2be8ede65b9bcf9b002a7 Hooks.DynamicBars was previously using an MVar and the unsafePerformIO hack ( http://www.haskell.org/haskellwiki/Top_level_mutable_state ) to store bar state. Since ExtensibleState exists to solve these sorts of problems, I've switched the file over to use unsafePerformIO instead. Some functions' types had to be changed to allow access to XState, but the public API is unchanged. ] [Catch exceptions when finding commands on PATH in Prompt.Shell Thomas Tuegel <ttuegel(a)gmail.com>**20130616230219 Ignore-this: 5a4d08c80301864bc14ed784f1054c3f ] [Fix haddock parse error in X.A.LinkWorkspaces Adam Vogt <vogt.adam(a)gmail.com>**20130528133448 Ignore-this: 42f05cf8ca9e6d1ffae3bd20666d87ab ] [use Data.Default wherever possible, and deprecate the things it replaces Daniel Wagner <daniel(a)wagner-home.com>**20130528013909 Ignore-this: 898458b1d2868a70dfb09faf473dc7aa ] [eliminate references to defaultConfig Daniel Wagner <daniel(a)wagner-home.com>**20130528005825 Ignore-this: 37ae613e4b943e99c5200915b9d95e58 ] [minimal change needed to get xmonad-contrib to build with xmonad's data-default patch Daniel Wagner <daniel(a)wagner-home.com>**20130528001040 Ignore-this: 291e4f6cd74fc2b808062e0369665170 ] [Remove unneeded XSync call in Layout.ShowWName Francesco Ariis <fa-ml(a)ariis.it>**20130517153341 Ignore-this: 4d107c680572eff464c8f6ed9fabdd41 ] [Remove misleading comment: we definitely don't support ghc-6.6 anymore Adam Vogt <vogt.adam(a)gmail.com>**20130514215851 Ignore-this: 2d071cb05709a16763d039222264b426 ] [Fix module name in comment of X.L.Fullscreen Adam Vogt <vogt.adam(a)gmail.com>**20130514215727 Ignore-this: cb5cf18c301c5daf5e1a2527da1ef6bf ] [Minor update to cabal file (adding modules & maintainership) Adam Vogt <vogt.adam(a)gmail.com>**20130514215632 Ignore-this: 82785e02e544e1f797799bed5b5d9be2 ] [Remove trailing whitespace in X.A.LinkWorkspaces Adam Vogt <vogt.adam(a)gmail.com>**20130514215421 Ignore-this: 5015ab4468e7931876eb66b019af804c ] [Update documentation of LinkWorkspaces Module quesel@informatik.uni-oldenburg.de**20110328072813 Ignore-this: da863534931181f551c9c54bc4076c05 ] [Added a module for linking workspaces quesel@informatik.uni-oldenburg.de**20110210165018 Ignore-this: 1dba2164cc3387409873d33099596d91 This module provides a way to link certain workspaces in a multihead setup. That way, when switching to the first one the other heads display the linked workspaces. ] [Cache results from calcGap in ManageDocks Adam Vogt <vogt.adam(a)gmail.com>**20130425155811 Ignore-this: e5076fdbdfc68bc159424dd4e0f14456 http://www.haskell.org/pipermail/xmonad/2013-April/013670.html ] [Remove unnecessary contexts from L.MultiToggle Adam Vogt <vogt.adam(a)gmail.com>**20130217163356 Ignore-this: 6b0e413d8c3a58f62088c32a96c57c51 ] [Generalises modWorkspace to take any layout-transforming function gopsychonauts@gmail.com**20130501151425 Ignore-this: 28c7dc1f6216bb1ebdffef5434ccbcbd modWorkspace already was capable of modifying the layout with an arbitrary layout -> layout function, but its original type restricted it such that it could only apply a single LayoutModifier; this was often inconvenient, as for example it was not possible simply to compose LayoutModifiers for use with modWorkspace. This patch also reimplements onWorkspaces in terms of modWorkspaces, since with the latter's less restrictive type this is now possible. ] [since XMonad.Config.Dmwit mentions xmobar, we should include the associated .xmobarrc file Daniel Wagner <daniel(a)wagner-home.com>**20130503194055 Ignore-this: 2f6d7536df81eb767262b79b60eb1b86 ] [warning police Daniel Wagner <daniel(a)wagner-home.com>**20130502012700 Ignore-this: ae7412ac77c57492a7ad6c5f8f50b9eb ] [XMonad.Config.Dmwit Daniel Wagner <daniel(a)wagner-home.com>**20130502012132 Ignore-this: 7402161579fd2e191b60a057d955e5ea ] [minor fixes to the haddock markup in X.L.IndependentScreens Daniel Wagner <daniel(a)wagner-home.com>**20130411193849 Ignore-this: b6a139aa43fdb39fc1b86566c0c34c7a ] [add whenCurrentOn to X.L.IndependentScreens Daniel Wagner <daniel(a)wagner-home.com>**20130408225251 Ignore-this: ceea3d391f270abc9ed8e52ce19fb1ac ] [Allow to specify the initial gaps' states in X.L.Gaps Paul Fertser <fercerpav(a)gmail.com>**20130222072232 Ignore-this: 31596d918d0050e36ce3f64f56205a64 ] [should bump X11 dependency, too, to make sure we have getAtomName Daniel Wagner <daniel(a)wagner-home.com>**20130225180527 Ignore-this: 260711f27551f18cc66afeb7b4846b9f ] [getAtomName is now defined in the X11 library Daniel Wagner <daniel(a)wagner-home.com>**20130225180323 Ignore-this: 3b9e17c234679e98752a47c37132ee4e ] [Allow to limit maximum row count in X.Prompt completion window Paul Fertser <fercerpav(a)gmail.com>**20130221122050 Ignore-this: 923656f02996f2de2b1336275392c5f9 On a keyboard-less device (such as a smartphone), where one has to use an on-screen keyboard, the maximum completion window height must be limited to avoid overlapping the keyboard. ] [Note in U.NameActions that xmonad core can list default keys now Adam Vogt <vogt.adam(a)gmail.com>**20130217233026 Ignore-this: 937bff636fa88171932d5192fe8e290b ] [Export U.NamedActions.addDescrKeys per evaryont's request. Adam Vogt <vogt.adam(a)gmail.com>**20130217232619 Ignore-this: a694a0a3ece70b52fba6e8f688d86344 ] [Add EWMH DEMANDS_ATTENTION support to UrgencyHook. Maarten de Vries <maarten(a)de-vri.es>**20130212181229 Ignore-this: 5a4b314d137676758fad9ec8f85ce422 Add support for the _NET_WM_STATE_DEMANDS_ATTENTION atom by treating it the same way as the WM_HINTS urgency flag. ] [Unconditionally set _NET_WORKAREA in ManageDocks Adam Vogt <vogt.adam(a)gmail.com>**20130117180851 Ignore-this: 9f57e53fba9573d8a92cf153beb7fe7a ] [spawn command when no completion is available (if alwaysHighlight is True); changes commandToComplete in Prompt/Shell to complete the whole word instead of using getLastWord c.lopez@kmels.net**20130209190456 Ignore-this: ca7d354bb301b555b64d5e76e31d10e8 ] [order-unindexed-ws-last matthewhague@zoho.com**20120703222726 Ignore-this: 4af8162ee8b16a60e8fd62fbc915d3c0 Changes the WorkspaceCompare module's comparison by index to put workspaces without an index last (rather than first). ] [SpawnOn modification for issue 523 Adam Vogt <vogt.adam(a)gmail.com>**20130114014642 Ignore-this: 703f7dc0f800366b752f0ec1cecb52e5 This moves the function to help clean up the `Spawner' to the ManageHook rather than in functions like spawnOn. Probably it makes no difference, the reason is because there's one manageSpawn function but many different so this way there are less functions to write. ] [Update L.TrackFloating.useTransient example code Adam Vogt <vogt.adam(a)gmail.com>**20130112041239 Ignore-this: e4e31cf1db742778c1d59d52fdbeed7a Suggest useTransient goes to the right of trackFloating which is the configuration actually tested. ] [Adapt ideas of issue 306 patch to a new modifier in L.TrackFloating Adam Vogt <vogt.adam(a)gmail.com>**20130112035701 Ignore-this: d54d27b71b97144ef0660f910fd464aa ] [Make X.A.CycleWS not rely on hidden WS order Dmitri Iouchtchenko <johnnyspoon(a)gmail.com>**20130109023328 Ignore-this: 8717a154b33253c5df4e9a0ada4c2c3e ] [Add X.H.WorkspaceHistory Dmitri Iouchtchenko <johnnyspoon(a)gmail.com>**20130109023307 Ignore-this: c9e7ce33a944facc27481dde52c7cc80 ] [Allow removing arbitrary workspaces Dmitri Iouchtchenko <johnnyspoon(a)gmail.com>**20121231214343 Ignore-this: 6fce4bd3d0c5337e5122158583138e74 ] [Remove first-hidden restriction from X.A.DynamicWorkspaces.removeWorkspace' Dmitri Iouchtchenko <johnnyspoon(a)gmail.com>**20121231214148 Ignore-this: 55fb0859e9a5f476a834ecbdb774aac8 ] [Add authorspellings file for `darcs show authors'. Adam Vogt <vogt.adam(a)gmail.com>**20130101040031 Ignore-this: c3198072ebc6a71d635bec4d8e2c78fd This authorspellings file includes a couple people who've contributed to xmonad (not XMonadContrib). When people have multiple addresses, the most recent one has been picked. ] [TAG 0.11 Adam Vogt <vogt.adam(a)gmail.com>**20130101014231 Ignore-this: 57cf32412fd1ce912811cb7fafe930f5 ] Patch bundle hash: 670d7e477470a517eb62278dd012400269244bdc -- brandon s allbery kf8nh sine nomine associates allbery.b(a)gmail.com ballbery(a)sinenomine.net unix, openafs, kerberos, infrastructure, xmonad http://sinenomine.net

2 2

Re: [xmonad] xmonad with emacs
by Steve Quezadas 17 Apr '15

17 Apr '15

Ok, I found out the conflict that I thought was attributable to xmonad. As a reminder, "control-space" is a keybinding under emacs for the set-mark-command feature which allows a user to select text. For some reason, control-space wasn't working when emacs was under x-monad, but was working when it was using Ubuntu unity. Actually, the conflict over the keybinding happened with ibus. ibus somehow maps control-space and prevents emacs from using that key command. When I disabled ibus, the problem stopped. so it wasn't xmonad's fault. I am putting this on the maillist just in case other people have this problem, they can look it up through keywords or whatever. - Steve PS I really LOVE x-monad. It's so much more efficient with larger monitors. Keep up the good work guys! > Yes; I was looking for what you just told me, that you were using Unity > which presumably loads a keymap. (I have no idea which one, though.) > xmonad will be using the server default. > > Unfortunately, control expansions are special-cased in both xkb and > xmodmap and can't be specified --- which makes me wonder how you managed > to lose it, unless the real problem is whatever terminal emulator you're > getting (given gnomeConfig, presumably gnome-terminal) was handling it > itself, and has different settings when not running in a Gnome 3 > session. (You cannot use xmonad, or any window manager that is not a > Gnome Shell derivative (gnome-shell, or the Unity or Cinnamon forks > thereof), with Gnome 3. This is not something we have any control over.) > > MATE's fork of gnome-terminal does the right thing under xmonad --- but > I am using a MATE session (since it's a fork of Gnome 2, it still allows > alternative window managers). I also don't see a way to control it from > its preferences or keyboard shortcuts. Gnome 3's gnome-terminal may > differ, though.

1 0

xmonad: xmonad-extras 0.12 fails to build
by Dave Macias 16 Apr '15

16 Apr '15

This is my first time posting here so i hope im doing this right. Just updated ghc to 7.10.1 and had to rebuild xmonad, xmonad-contrib, and xmobar. I also use xmonad-extras but it failed during the build. I tried using cabal and also from source but both give same output: $ cabal install xmonad-extras Resolving dependencies... Configuring xmonad-extras-0.12... Building xmonad-extras-0.12... Failed to install xmonad-extras-0.12 Build log ( /home/dvmacias/.cabal/logs/xmonad-extras-0.12.log ): Configuring xmonad-extras-0.12... Building xmonad-extras-0.12... Preprocessing library xmonad-extras-0.12... [1 of 2] Compiling XMonad.Util.WindowPropertiesRE ( XMonad/Util/WindowPropertiesRE.hs, dist/build/XMonad/Util/WindowPropertiesRE.o ) [2 of 2] Compiling XMonad.Actions.Volume ( XMonad/Actions/Volume.hs, dist/build/XMonad/Actions/Volume.o ) XMonad/Actions/Volume.hs:173:23: Ambiguous occurrence ‘<*’ It could refer to either ‘XMonad.Actions.Volume.<*’, defined at XMonad/Actions/Volume.hs:66:4 or ‘Prelude.<*’, imported from ‘Prelude’ at XMonad/Actions/Volume.hs:15:8-28 (and originally defined in ‘GHC.Base’) XMonad/Actions/Volume.hs:173:43: Ambiguous occurrence ‘<*’ It could refer to either ‘XMonad.Actions.Volume.<*’, defined at XMonad/Actions/Volume.hs:66:4 or ‘Prelude.<*’, imported from ‘Prelude’ at XMonad/Actions/Volume.hs:15:8-28 (and originally defined in ‘GHC.Base’) XMonad/Actions/Volume.hs:200:62: Ambiguous occurrence ‘<*’ It could refer to either ‘XMonad.Actions.Volume.<*’, defined at XMonad/Actions/Volume.hs:66:4 or ‘Prelude.<*’, imported from ‘Prelude’ at XMonad/Actions/Volume.hs:15:8-28 (and originally defined in ‘GHC.Base’) XMonad/Actions/Volume.hs:215:32: Ambiguous occurrence ‘<*’ It could refer to either ‘XMonad.Actions.Volume.<*’, defined at XMonad/Actions/Volume.hs:66:4 or ‘Prelude.<*’, imported from ‘Prelude’ at XMonad/Actions/Volume.hs:15:8-28 (and originally defined in ‘GHC.Base’) XMonad/Actions/Volume.hs:225:58: Ambiguous occurrence ‘<*’ It could refer to either ‘XMonad.Actions.Volume.<*’, defined at XMonad/Actions/Volume.hs:66:4 or ‘Prelude.<*’, imported from ‘Prelude’ at XMonad/Actions/Volume.hs:15:8-28 (and originally defined in ‘GHC.Base’) cabal: Error: some packages failed to install: xmonad-extras-0.12 failed during the building phase. The exception was: ExitFailure 1 I got to look at the log but it just has what i pasted above. System is Arch 3.19.2-1-ARCH Any input is appreciated. Thanks dave

5 9

Re: [xmonad] Two patches related to XMonad.Prompt
by Brent Yorgey 16 Apr '15

16 Apr '15

OK, I've made some progress figuring out what is going on. In short: the searchPredicate field is never used in XMonad.Prompt! The only place the searchPredicate is used is in XMonad.Prompt.Window, in the definition of the doPrompt function. So this will work if you happen to be using a prompt to pick a window, but not for any other sort of prompt. This actually seems like a bug in XMonad.Prompt. At some point someone added a searchPredicate field to the XPConfig, but forgot to actually use it to filter completion results. Norbert, is this something you could look into? I've looked through XMonad.Prompt briefly but not sure where the right place is for this to go. I'll probably get around to it eventually if no one else does. -Brent On Fri, Apr 3, 2015 at 6:08 PM Brent Yorgey <byorgey(a)gmail.com> wrote: > Hmm, I tried it out but can't seem to get it to work. Mysterious. The > patches are definitely applied, my xmonad.hs includes definitions for > sorter and searchPredicate, it compiles cleanly, but when I open a prompt > it has the same behavior as before. > > I'll try to spend some more time tracking down what is going on but just > wanted to briefly report. > > -Brent > > On Mon, Mar 23, 2015 at 2:39 PM Brent Yorgey <byorgey(a)gmail.com> wrote: > >> >> >> ---------- Forwarded message --------- >> From: Norbert Zeh <nzeh(a)cs.dal.ca> >> Date: 12:59pm, Sat, Mar 14, 2015 >> Subject: [xmonad] Two patches related to XMonad.Prompt >> To: xmonad(a)haskell.org <xmonad(a)haskell.org> >> >> >> Hi folks, >> >> I really got used to using emacs ido mode, which offers a pretty powerful >> and intuitive fuzzy matching of completions, so I wanted to port the same >> to XMonad.Prompt. This required two patches, included in the attached >> patch bundles: >> >> (1) Completions should be sortable by how well they match the current >> query string. This turned out to be a very easy addition of a 'sorter' >> function to XPConfig, which is parameterized by the current query string. >> The default is 'const id', that is, no sorting is done, which is exactly >> the old behaviour of XMonad.Prompt. >> >> (2) A new module XMonad.Prompt.FuzzyMatch that implements the fuzzy >> matching. The exact rules for matching and sorting of matches are >> explained in its documentation. >> >> As usual, let me know if anything needs to straightened out before these >> patches can be applied. >> >> Cheers, >> Norbert >> _______________________________________________ >> xmonad mailing list >> xmonad(a)haskell.org >> http://mail.haskell.org/cgi-bin/mailman/listinfo/xmonad >> >

2 2

Re: [xmonad] xmonad with emacs
by Steve Quezadas 15 Apr '15

15 Apr '15

Oh, sorry, I meant to reply to the list, not you individually! The "reply to" command is not working right for some reason. I will check when I get home to see if my windows manager is somehow mucking things up. - Steve On 4/14/2015 11:50 AM, Tikhon Jelvis wrote: > Oh, I'm sorry, I assumed the `-- more changes' comment was a placeholder > for, well, more changes! If that's all you have, it's probably an issue > with something besides XMonad itself—Brandon's suggestion sounds > plausible. I'm not sure how to check that myself, I'm afraid. > > Also, I don't know if you did this on purpose, but you only sent this > message to me, not to the whole list. Keeping the conversation on the > list proper could be useful because other people might be able to help. > (It's something it took me a while to get used to myself, and I'm still > not too certain on good list etiquette :P.) > > On Tue, Apr 14, 2015 at 11:44 AM, Steve Quezadas <steve(a)thestever.net > <mailto:steve@thestever.net>> wrote: > > Interesting. I've used Emacs with XMonad and never had this problem. > > Are you running Emacs in X mode or in a terminal emulator? Also, > what > happens if you try this with as close to a stock XMonad as possible: > comment out all the parts of your config except for the modMask > setting. > > > I am using xmonad is x mode (I think, I'm basically using a > graphical user interface). My config is as stock as they come. This > is the whole thing: > > import XMonad > import XMonad.Config.Gnome > > main = xmonad gnomeConfig > { modMask = mod4Mask -- Use Super instead of Alt > -- more changes > } > > > The only one line that's differnt is the modMask line which remaps > the "alt" key to "super" key for xmonad stuff. > > - Steve > >

1 0