July 2008 - cabal-devel

[Hackage] #245: Cabal gets paths wrong in INCLUDEs
by Hackage 26 Aug '08

26 Aug '08

#245: Cabal gets paths wrong in INCLUDEs ----------------------------+----------------------------------------------- Reporter: guest | Owner: Type: defect | Status: new Priority: normal | Milestone: Component: Cabal library | Version: 1.2.3.0 Severity: normal | Keywords: Difficulty: normal | Ghcversion: 6.8.2 Platform: | ----------------------------+----------------------------------------------- The Pugs project recently uncovered a bit of a problem with GHC 6.8.x. To quote: - {-# INCLUDE -} seems to require either a very relative or an absolute path. That is, you have to make the path listed inside an INCLUDE ('dist/build/Pugs/Embed/Parrot_hsc.h') in the file dist/build/Pugs/Embed/Parrot.hs absolute or completely relative - that is, the first line needs to look like either '{-# INCLUDE "Parrot_hsc.h" #-}' or '{-# INCLUDE "/home/gwern/bin/pugs/dist/build/Pugs/Embed/Parrot_hsc.h" #-}'. The particular problem is that 'dist/build/Pugs/Embed/Parrot_hsc.c:#include "Parrot_hsc.h"' is being translated to the (broken) 'dist/build/Pugs/Embed/Parrot.hs:{-# INCLUDE "dist/build/Pugs/Embed/Parrot_hsc.h" #-}'. The relevant files and notes can be found in the Pugs SVN repo, in src/Pugs/Embed/, and the files of interest are Haskell.hs Parrot.hsc Parrot_hsc.c Parrot_hsc.h Perl5.hs Pugs.hs -- gwern -- Ticket URL: <http://hackage.haskell.org/trac/hackage/ticket/245> Hackage <http://haskell.org/cabal/> Hackage: Cabal and related projects

1 5

proptotype of make style dep stuff
by Duncan Coutts 24 Aug '08

24 Aug '08

All, At the recent Haskell Hackathon after ICFP, one of the issues that filled a lot of the thinking and drinking time of the Cabal hackers present was the issue of dependency analysis. I'd like to present some initial ideas and code that arose out of discussions, particularly between Lennart Kolmodin, Thomas Schilling and myself. The code I'm presenting was written jointly with them. This message is going to be one of those crazy literate Haskell programs. The code is also available here: darcs get http://haskell.org/~duncan/cabal/dep-experiment/ One thing we debated for some time was whether we needed support for dynamic or just static dependencies. The distinction here is whether one can always construct the entire dependency graph before running any expensive actions like pre-processors or compilers. If we assume that users do not need to specify every module in their package then it's easy to construct examples where it is impossible to construct the entire dependency graph without running pre-processors. So one of the requirements of this design is that we can interleave discovery of the dependency graph with running actions. We would also like to be able to specify and test the implementation. So allowing testing without having to do IO would be an advantage. We also want it to be fairly generic and extensible with respect to the kinds of actions and rules we can express. We want people to be able to extend the system with their own custom pre-processors for example. So let's dive in... > data Graph m = Graph [Rule m] [Target] We'll use an explicit representation of a dependency graph. This representation is not efficient but it's fairly simple. We have a set of rules and a set of targets which we're currently chasing but have not yet got rules to cover. So we would start our make procedure with a graph with no rules and just the targets we wish to build. > data Rule m = Rule { > targets :: [Target], > depends :: [Target], > action :: m [Target] > } A rule has a list of targets and a list of dependencies and an action. So a rule is not a simple edge or node in a dependency graph. It is a bundle of edges with an associated action. The reason we need multiple targets is because many build actions produce multiple output files, think .o and .hi files as the primary example. So a Rule says that there is a dependency or edge between every target and every dependency. This representation is mostly lifted from Neil Mitchel's make code. The difference is in the handling of dynamic dependencies. Here, the action can return a list of targets and this is used in our implementation of dynamic dependencies. I will come back to how that works later. Note also that the Rule and thus the Graph type are parameterised by a type m. This will be the monad that the actions work in. It will allow us to use it with a testing monad that does no IO and enables QuickCheck specifications and also later with a monad that can actually to IO and run programs. > instance Show (Rule m) where > show (Rule ts ds _) = "Rule " ++ show ts ++ " " ++ show ds ++ " (<action>)" We need to be able to show rules, though we cannot show the associated action of course. > type Target = FilePath We've talked about Targets already without saying what they are. Initially we are using the simplification that a target is just a FilePath. We currently do not distinguish different kinds of targets, so called resolved or unresovled targets. We will need a notion of a thing that we depend on, but which we have not yet nailed down to a particular concrete object like a file. It will be necessary later to make have that notion to support search paths and other indirections. We will also later want to have more than a single name space for targets, since not every target corresponds directly to a file. > type DepGenerator m = Target -> m [Rule m] A dependency generator is a function that given a target produces for us one or more rules that 'cover' that target. That is there is one rule that has that target in its targets list. It may also fail if there is no way to find a rule. Again the action is in some monad, so it may go and do actions in the monad like searching the file system. It presumably will also consult some rule schema that say how to make a rule for any file of a particular kind. This is one way we can separate the dependency chasing from the main make algorithm. > make :: Monad m > => DepGenerator m > -> Graph m > -> m () So we come to the make algorithm. As I mentioned before it is parametrised by some Monad m. It takes one of these dependency generation functions and the current Graph. Initially we expect the Graph will have no rules and just the initial targets (which might for example be the .hi/.o files corresponding to the exposed modules in a library). > make gen (Graph [] []) = return () If the graph is completely empty we're done. This will always happen in the end because we remove rules when we've run their actions. > make gen (Graph rules (t:ts)) = do > rules' <- gen t > make gen (Graph (rules' ++ rules) ts) We prefer expanding the graph to running actions. This is because expanding the graph gives us more choice about which actions to run later (possibly in parallel). It also means that when it is possible to generate the whole graph as in the static depgraph approach, that we do just that. So we pick the first unresolved dependency and we ask the dep generator to make some rules that tell us how to build that as a target. We add those rules to our rule set and carry on. There are some requirements on the returned rules here. For one thing they must actually 'cover' the target we were asking about. Secondly they must extend our current graph in a connected way without overlapping any targets. These are all (ill-specified) invariants of the dep graph, that it must be connected and it must not be ambiguous which rule to use to generate a particular target. No doubt there are other invariants that we should specify and check. > make gen (Graph rules []) = > case selectReadyRule rules of > (rule, rules') -> do > dyntargets <- action rule > make gen (Graph (markCompletedDeps (targets rule) dyntargets rules') > (newDeps dyntargets rules')) Ok, now for the interesting and slightly more tricky bit. If we are done for the moment expanding the graph then we turn to reducing the graph by running actions. > selectReadyRule :: [Rule m] -> (Rule m, [Rule m]) > selectReadyRule rules = > case partition (null . depends) rules of > (rule:rules',rules'') -> (rule, rules' ++ rules'') > ([], _) -> error "selectReadyRule: no rules ready to go!?!" We first of all select a rule that is read to be run. A rule is ready if it has no remaining dependencies. This should always be the case if the graph is not empty and has no dangling dependencies and is not cyclic. This property is something our graph invariants should tell us. Note that this is where we have the opportunity for parallelism as we can pick all the rules with no dependencies. For the moment we will just pick one rule. We run the rule's action and get back a list of targets. I mentioned earlier that these targets are to do with the way we've chosen to implement dynamic dependencies. Lets look at that in more detail now. It is perhaps best explained with an example, in pseudo-make syntax: foo.o foo.hi : foo.hs $(include foo.dep) ghc -c foo.hs foo.dep : foo.hs gatherdeps foo.hs > foo.dep What we mean by this is that foo.dep will contain the dependencies of foo.hs that we discover by reading foo.hs and looking at it's imports. They are dynamic in the sense that we can only discover the dependencies once foo.hs exists, since it may be generated by a pre-processor. Then we say that foo.o foo.hi depend on all the dependencies given in foo.dep, which of course requires foo.dep to be up to date. So what happens while we're reducing this graph is that we replace the dependency foo.dep with it's contents. We do that when we run the action that brings foo.dep up to date. So let us express the above rules in our notation: r1 = Rule { targets = ["foo.o", "foo.hi"], depends = ["foo.hs", "foo.dep"], action = ghc "foo.hs" } r2 = Rule { targets = ["foo.dep"], depends = ["foo.hs"], action = return ["bar.hi"] } Obviously the dep action would not be a constant like that but would read the .hs file to find the imports, and cache them in the .dep file. But it would return them all in a list like that. Recalling where we were in our make algorithm... > make gen (Graph rules []) = > case selectReadyRule rules of > (rule, rules') -> do > dyntargets <- action rule > make gen (Graph (markCompletedDeps (targets rule) dyntargets rules') > (newDeps dyntargets rules')) So we have run the rules action which means we can assume the rule's targets are up to date. So we can go and cross off all those targets where they appear as dependencies in other rules. In addition if this action returned any dependencies then we have to go insert those in replacement of the completed target. > markCompletedDeps :: [Target] -> [Target] -> [Rule m] -> [Rule m] > markCompletedDeps targets dyntargets = map updateDepends > where updateDepends rule@Rule { depends = ds } > | length ds == length ds' = rule > | otherwise = rule { depends = dyntargets ++ ds' } > where ds' = ds \\ targets So we do that just by going through all the rules and for each one checking if any of the completed targets occurred in that rule's depends list. If it did we also insert any dynamic targets that the action may have produced. > newDeps :: [Target] -> [Rule m] -> [Target] > newDeps ts rules = [ t | t <- ts, all (\rule -> t `notElem` targets rule) rules ] These dynamic targets may also in fact be completely new targets which were not already in the graph. If this is the case then we have to find out which ones are new and add the to the list of unresolved targets in the Graph before calling make again. In that case we would go back to expanding the graph. So that's it. That's the make algorithm. Now lets try it out... We're going to implement a monad to use make on. It's going to be a simulation of a file system rather than a monad that does real IO and uses the real file system. This will make testing easier. > data State = State { > currentTime :: Timestamp, > filesystem :: FileSystem > } The monad will be a state monad with the state consisting of the current state of the filesystem and the current time. > type FileSystem = Map.Map FilePath File > type Timestamp = Int A filesystem is just a map of paths to files and a timestamp is just an integer. The time will increase monotonically with each interesting action on the filesystem. > data File = File { > timestamp :: Timestamp, > content :: [String] > } > deriving Show A file has a timestamp of when it was created or last modified and it has content which we model as just a list of strings. For different kinds of files we will interpret theses strings differently. > emptyState = State 1 Map.empty The initial state is an empty filesystem at time 1. > instance Show State where > show (State _ tr) = > '\n' : (unlines $ map show $ Map.keys tr) We can show states, just listing the paths in the filesystem. > type Trace = [(Action, State)] It will be useful in specifying the behaviour of make to have specifications that can quantify over all actions in the execution. So we have a Trace which is a history of all actions and the state of the system at the time of that action. > newtype Make a = Make { unMake :: WriterT Trace (Monad.State State) a } > deriving (Functor, Monad, MonadState State, MonadWriter Trace) Our Make monad is then a state monad with the current state and it's also a Writer monad producing the Trace. > runMake :: Make () -> Trace > runMake = > snd . fst . flip runState emptyState . runWriterT . unMake Running an action in this monad gives us the action's Trace. > data Action = Stat FilePath > | ReadFile FilePath > | WriteFile FilePath [String] > deriving Show The actions we can get in a trace are all primitives actions on the filesystem. We distinguish stats from file reads though it is not yet clear if this is necessary. > log :: Action -> Make () > log action = do > state <- get > tell [(action, state)] We can insert actions into the log. > stat :: FilePath -> Make (Maybe Timestamp) > stat path = do > log (Stat path) > State _ filesystem <- get > case Map.lookup path filesystem of > Just file -> return (Just (timestamp file)) > Nothing -> return Nothing Stating a file tests for its existance. If it does exist we get back the file's timestamp but not it's content. > readFile :: FilePath -> Make File > readFile path = do > log (ReadFile path) > State _ filesystem <- get > case Map.lookup path filesystem of > Just file -> return file > Nothing -> fail $ "file does not exist: " ++ path Reading a file gets the File, that is the timestamp and the content. > writeFile :: FilePath -> [String] -> Make () > writeFile path content = do > log (WriteFile path content) > State curtime filesystem <- get > let file = File curtime content > put $ State (curtime + 1) (Map.insert path file filesystem) To write a file you supply the content and the timestamp gets set as the current time. The world timestamp gets incremented at this point. > exists :: FilePath -> Make Bool > exists path = isJust <$> stat path > touch :: FilePath -> Make () > touch path = writeFile path [] A couple convenience functions in terms of the primitives. So now we can write some programs that run in our Make monad and interact with our filesystem. > ghc :: FilePath -> Make () > ghc file = > case splitExtension file of > (baseFile,".hs") -> do > File _ imports <- readFile file > mapM_ readFile (map (<.> "hi") imports) > mapM_ touch $ map (baseFile <.>) ["o", "hi"] > _ -> fail $ "ghc didn't get a .hs file: " ++ file You never realised ghc was so simple eh? So it reads the .hs file. We interpret the content of the .hs file to be a list of module imports. So we map those to paths of .hi files and go and read the .hi files of the imported modules. Finally we write the output .o and .hi files. So we'll want to try it out with our make code. Let's construct an example with a couple modules, a main module foo.hs which imports module Bar from Bar.hs. > test = do > writeFile "foo.hs" ["Bar"] > touch "Bar.hs" > make gen (Graph [] ["foo.hi"]) So there we have it, foo.hs imports Bar and Bar.hs imports nothing. We then want to make foo.hi which will involve building both modules. Of course we need our dependency generator function gen and some rule schema that say how to build .hi files. > gen :: DepGenerator Make > gen target > | ext == ".hi" = return [hiFileRuleSchema file > ,depFileRuleSchema file > ,fileExistsRuleSchema (file <.> "hs")] > > where (file, ext) = splitExtension target For this example we can assume we only have to find rules to cover .hi files. We'll generate three rules, one to compile the .hi and .o file from the .hs file. Though it also depends on the .dep file. So we need another to generate the .dep from the .hs. Finally we need a rule that generates the .hs from nothing. > fileExistsRuleSchema :: FilePath -> Rule Make > fileExistsRuleSchema file = Rule { > targets = [file], > depends = [], > action = readFile file >> return [] > } Our system does not allow dangling dependencies, so even the simple case of a source file needs a rule. Of course it is a trivial rule as it has no depends. The action asserts that the file exists and does not generate any dynamic dependencies. Note that an alternative system to caching deps in using dep files would be for the .hs rule to return the dynamic deps directly. > hiFileRuleSchema :: FilePath -> Rule Make > hiFileRuleSchema file = Rule { > targets = [file <.> "hi", file <.> "o"], > depends = [file <.> "hs", file <.> "dep"], > action = ghc (file <.> "hs") >> return [] > } So the .hi .o rule runs ghc on the .hs file. > depFileRuleSchema :: FilePath -> Rule Make > depFileRuleSchema file = Rule { > targets = [file <.> "dep"], > depends = [file <.> "hs"], > action = do > yep <- exists (file <.> "dep") > if yep > then do File _ deps <- readFile (file <.> "dep") > return deps > else do File _ imports <- readFile (file <.> "hs") > let deps = map (<.> "hi") imports > writeFile (file <.> "dep") deps > return deps > } The .dep rule makes the .dep file from the .hs file. The action is a bit more complicated. Actually I now notice that it's wrong :-). It's caching the dependencies of the .hs file in the .dep file, but it is not re-reading the dependencies if the cached ones are stale. However, in either case it returns the list of dependencies. These get substituted for the *.dep file in the hi rule. So that's the whole system. Here's the result of evaluating > map fst (runMake test) WriteFile "foo.hs" ["Bar"] WriteFile "Bar.hs" [] ReadFile "foo.hs" Stat "foo.dep" ReadFile "foo.hs" WriteFile "foo.dep" ["Bar.hi"] ReadFile "Bar.hs" Stat "Bar.dep" ReadFile "Bar.hs" WriteFile "Bar.dep" [] ReadFile "Bar.hs" WriteFile "Bar.o" [] WriteFile "Bar.hi" [] ReadFile "foo.hs" ReadFile "Bar.hi" WriteFile "foo.o" [] WriteFile "foo.hi" [] The trace shows us discovering the dependencies of foo.hs and going and compiling Bar.hs. We could also inspect the state of the filesystem at the end, or indeed at any intermediate stage. So what's next... We want to write some specifications, both of what make should do and some internal invariants about the graph. For example what specification would detect the bug above about .dep files not being re-generated when they are stale? We should also be able to make performance specifications like saying that (any >> make >> make) extends the trace of (any >> make) with just file stats/reads and no writes. This should correspond to saying that make should be able to find out quickly that there is nothing to be done in a built tree just by checking timestamps and cached deps. We've not actually implemented checking if actions need to run or if they are already up to date with respect to their dependencies. This can be integrated into a smart Rule constructor that wraps the action with checks on the timestamps of the target and depends. It probably does not need to be integrated into the core make algorithm, it can just blindly run actions (though if we want to allow continuous builds we will have to revisit this). Again we ought to be able to construct specifications that check that we do not needlessly run actions but only do them when targets are out of date with respect to their dependencies. We should construct well known tricky examples, like search path shadowing problems and make sure our specifications catch such bugs. We currently have not looked at search paths. This makes things harder and probably requires a distinction between resolved and unresolved Targets. We currently do not cope with extra targets that we discover dynamically, like _stub.c files that pop out of compilation. We will have to track these as we at least have to link _stub.o files and in the case of c2hs producing .c files we may have to do further actions to compile them too. Then there's .hi boot files and what to do when we detect cycles. Lots of fun. So we'd appreciate comments, review and especially help with specifying, building and verifying a more realistic model before we move to an implementation using IO and invoking real programs. darcs get http://haskell.org/~duncan/cabal/dep-experiment/ patches gladly accepted. Of course there are existing systems which solve similar problems and people have had goes already at implementing dep analysis directly in Cabal. We don't want to ignore existing stuff but it's important we have something we can all understand and specify and verify. And extend. It's a tall order. Duncan

6 11

[Hackage] #269: Not having an up-to-date package list causes indexing out of bounds error
by Hackage 24 Aug '08

24 Aug '08

#269: Not having an up-to-date package list causes indexing out of bounds error ---------------------------------+------------------------------------------ Reporter: guest | Owner: Type: defect | Status: new Priority: low | Milestone: Component: cabal-install tool | Version: 1.2.3.0 Severity: normal | Keywords: Difficulty: normal | Ghcversion: 6.8.2 Platform: | ---------------------------------+------------------------------------------ Not having an up-to-date package list causes {{{ cabal: Data.ByteString.Lazy.index: index too large: 0 }}} (.. which is a bad error message.) -- Ticket URL: <http://hackage.haskell.org/trac/hackage/ticket/269> Hackage <http://haskell.org/cabal/> Hackage: Cabal and related projects

1 3

[Hackage] #223: allow per-package configuration options in config file
by Hackage 22 Aug '08

22 Aug '08

#223: allow per-package configuration options in config file ---------------------------------+------------------------------------------ Reporter: duncan | Owner: Type: enhancement | Status: new Priority: normal | Milestone: Cabal-1.4 Component: cabal-install tool | Version: 1.2.3.0 Severity: normal | Keywords: Difficulty: normal | Ghcversion: 6.8.2 Platform: | ---------------------------------+------------------------------------------ Currently only a subset of the configure command line flags can be stored in cabal-install's config file. There is no particularly good reason for this. It should be reasonably straightforward to do it generically and allow all configure options to be kept in the config file. This may require some unification of the API for managing command line flags (the Simple.Command module) and the API for loading and saving from config flags (in ParseUtils). Once this is done, it should be straightforward to keep per-package config options as well as global options in the cabal-install config file. These could be used to augment the options used when configuring a package. The order of overriding in cabal-install is currently: {{{ savedConfig `mappend` configFlags }}} That is, the configure options from the config file are overridden by the ones supplied on the command line. With per-package saved config we would extend this to: {{{ globalSavedConfig `mappend` packageSavedConfig pkg `mappend` configFlags }}} ie per-package saved, overrides global saved, but command line still overrides everything. The slightly tricky bit is in how the api for config files and command line flags should be made to work better with each other, so that one set of information can be read/written from either source. The rest should be straightforward. -- Ticket URL: <http://hackage.haskell.org/trac/hackage/ticket/223> Hackage <http://haskell.org/cabal/> Hackage: Cabal and related projects

1 8

[Hackage] #276: Add support for convenience libraries
by Hackage 17 Aug '08

17 Aug '08

#276: Add support for convenience libraries ----------------------------+----------------------------------------------- Reporter: rl | Owner: Type: enhancement | Status: new Priority: normal | Milestone: Component: Cabal library | Version: 1.2.3.0 Severity: normal | Keywords: Difficulty: normal | Ghcversion: 6.8.2 Platform: | ----------------------------+----------------------------------------------- I'd like to have a package with several binaries which all use a convenience library included in that same package. The convenience library should NOT be installed. For this to work, Cabal needs two things. Firstly, it must allow dependencies within a package such that I could describe the library and have the binaries depend on it. Secondly, it should have an "installable" flag, similar to "buildable". A thing that's not installable would be built but not installed. The same mechanism could be used for package-internal tools. -- Ticket URL: <http://hackage.haskell.org/trac/hackage/ticket/276> Hackage <http://haskell.org/cabal/> Hackage: Cabal and related projects

1 2

[Hackage] #184: cabal-install should report build results to hackage server
by Hackage 15 Aug '08

15 Aug '08

#184: cabal-install should report build results to hackage server ----------------------------+----------------------------------------------- Reporter: duncan | Owner: Type: enhancement | Status: new Priority: normal | Milestone: Component: cabal-install | Version: 1.2.2.0 Severity: normal | Keywords: Difficulty: normal | Ghcversion: 6.4.2 Platform: Linux | ----------------------------+----------------------------------------------- One way to get a lot more testing data on hackage packages is if cabal- install could report back to the hackage server about build successes and failures. This information should be kept by hackage and used to distill information about which platforms configurations a package builds successfully and which it does not. This should provide useful information to developers to enable them to discover problems more quickly and useful information to users. An important consideration is privacy. Users should always have the option to not report anything and any information they report that is kept should not contain identifying information. This is particularly important when it comes to build logs which may contain paths etc. It should be clear to users what information they are reporting to the can decide for themselves if it meets their privacy needs. Since cabal can be used to build private code it is vital that it reports only on packages that were obtained from the hackage server. It is also vital that the information is sent to the correct hackage server. It's possible to set up private hackage server instances and it'd may be useful to collect build information "in house" too. So what information would be helpful? * build success or failure (qualified by what failed, build, docs, tests) * package name and version * hash of .cabal file just to make sure it's the same one we're all talking about and to detect local modifications. * precise versions of dependent packages that the package was built with. * os and arch strings * compiler flavour and version * versions of important build tools * In the case of a build failure, some part of the build log would be helpful. This is the most problematic part from a privacy point of view. This is quite a bit of raw data and we can expect to have many hundreds of such reports for popular packages. How can we distill useful information from this kind of data? I expect we would want to do some statistical analysis where we look for common traits in the results. The data forms a multi-dimensional space of boolean values. By looking down the rows/columns of this space we should be able to identify trends. For example if it always fails with ghc-6.8.x, or always fails on Windows. Excluding those obvious failures we then may be able to say that it does work on mac osx (except ghc-6.8.1) or that it does work with regex-posix-0.92 (except on windows), etc. This should allow us to give a summary saying yes/no to various properties of the environment. For failure cases developers should be able to get access to the more detailed data including build logs. -- Ticket URL: <http://hackage.haskell.org/trac/hackage/ticket/184> Hackage <http://haskell.org/cabal/> Hackage: Cabal and related projects

1 6

[Hackage] #304: cabal-install does not allow tildes in hackage server URIs
by Hackage 15 Aug '08

15 Aug '08

#304: cabal-install does not allow tildes in hackage server URIs ----------------------------------+----------------------------------------- Reporter: nfrisby | Owner: Type: defect | Status: new Priority: normal | Milestone: Component: cabal-install tool | Version: 1.2.3.0 Severity: normal | Keywords: Difficulty: very easy (<1 hour) | Ghcversion: 6.8.2 Platform: | ----------------------------------+----------------------------------------- We're using an internal hackage server, and the Hackage.Config.parseRepo function has been a small hurdle. It does not allow tildes in the URL for the repo, yet obtaining a URL without a tilde requires us to participate in some people process. I bounced the request off Lemmih, and he thinks it's just an oversight. I've attached a patch. -- Ticket URL: <http://hackage.haskell.org/trac/hackage/ticket/304> Hackage <http://haskell.org/cabal/> Hackage: Cabal and related projects

1 2

[Hackage] #229: Build C sources using the system's C compiler directly
by Hackage 15 Aug '08

15 Aug '08

#229: Build C sources using the system's C compiler directly ----------------------------+----------------------------------------------- Reporter: guest | Owner: Type: enhancement | Status: new Priority: normal | Milestone: Component: Cabal library | Version: 1.2.3.0 Severity: normal | Keywords: Difficulty: normal | Ghcversion: 6.8.2 Platform: | ----------------------------+----------------------------------------------- Currently Cabal builds C sources by going via ghc. On some platforms this introduces some limitations (Windows especially, I think). See this conversation for an example where it would be useful: http://www .mail-archive.com/haskell-cafe(a)haskell.org/msg37179.html -- Ticket URL: <http://hackage.haskell.org/trac/hackage/ticket/229> Hackage <http://haskell.org/cabal/> Hackage: Cabal and related projects

1 3

[Hackage] #225: allow installing just specific bits, like just docs
by Hackage 15 Aug '08

15 Aug '08

#225: allow installing just specific bits, like just docs ----------------------------+----------------------------------------------- Reporter: duncan | Owner: Type: enhancement | Status: new Priority: normal | Milestone: Component: Cabal library | Version: 1.2.3.0 Severity: normal | Keywords: Difficulty: normal | Ghcversion: 6.8.2 Platform: | ----------------------------+----------------------------------------------- Sometimes people would like to build and install just part of a cabal project, e.g. the documentation or one of the libraries or binaries. Specific use-cases are packaging for OS distro's and generating Haddock docs for code that was installed without it (cf the current state of Debian-stable). Igloo proposes the following user interface: ----- As long as docs, license and binaries can be (de)selected individually I don't really mind. If you want a concrete suggestion, we could have `--foo` and `--no-foo` for each thing, with the default being `--all` and the command line being processed left-to-right, e.g. {{{ cabal install --no-haddock-interfaces --docs --no-html }}} would install * all (which wouldn't actually contain anything) * docs (which wouldn't actually contain anything) * haddock-interfaces * license * everything under binaries ----- I broadly agree, but am slightly concerned there are dependencies amongst the various things that his syntax does not respect (e.g. one may need to install the libraries - e.g. one depending on a foreign library - in order to get a binary working). So either we have to vet the command lines or coarsen the flags. I hope Duncan and Igloo can draw on their packaging experience and determine what is actually useful. -- Ticket URL: <http://hackage.haskell.org/trac/hackage/ticket/225> Hackage <http://haskell.org/cabal/> Hackage: Cabal and related projects

1 6

[Hackage] #212: Overhaul Cabal's testsuite
by Hackage 15 Aug '08

15 Aug '08

#212: Overhaul Cabal's testsuite ----------------------------------+----------------------------------------- Reporter: duncan | Owner: Type: task | Status: new Priority: normal | Milestone: Component: Cabal library | Version: 1.2.3.0 Severity: normal | Keywords: Difficulty: very hard (<1 week) | Ghcversion: 6.8.2 Platform: | ----------------------------------+----------------------------------------- The current testsuite based on HUnit is almost completely bitrotted. Anyone who wants to take this on has essentially a completely clean slate to work from. The current system is split into two parts. There are hunit tests in many of the modules guarded by #ifdef DEBUG. Then there are external tests in the `tests/` subdirectory. The #ifdef DEBUG style is annoying since it involves using more CPP than seem really necessary. A couple notes from the old `TODO` file: {{{ ** add a make target or command for tests we know will fail? ** setup test suite to run on --push? ** redirect non-hunit outputs to a file? }}} One possibility that is available to us now that was not before is using the hackage collection as part of a regression test. For example it should always be possible to parse all the `.cabal` files in the index. -- Ticket URL: <http://hackage.haskell.org/trac/hackage/ticket/212> Hackage <http://haskell.org/cabal/> Hackage: Cabal and related projects

1 3