- cabal-devel - Haskell.org

Re: Windows Install Issues for erf (and statistics)
by Simon Marlow 23 Sep '09

23 Sep '09

On 22/09/2009 17:37, Lennart Augustsson wrote: > I'll look into it at work tomorrow. The problem I had before was that > it worked in ghc, but not ghci. > If there's no bug report I'll file one. I wouldn't say it was a bug - the function really doesn't exist, and the library really does refer to it (AIUI). The reason that ghc behaves differently from ghci is that you don't have to link all the symbols from a .a library. The same problem will occur in ghc if the package is compiled to a shared library or DLL. Cheers, Simon > -- Lennart > > On Wed, Sep 23, 2009 at 12:17 AM, Bryan O'Sullivan<bos(a)serpentine.com> wrote: >> On Tue, Sep 22, 2009 at 5:43 AM, Simon Marlow<marlowsd(a)gmail.com> wrote: >>> >>> Are you sure the problem you had isn't just that the C erfc function is >>> not available on Windows? >> >> I looked for it, and I can't find any documentation on MSDN, outside of >> Excel functions. >> >> I have a BSD-licensed C implementation of the function, so we can get that >> package working on all platforms if desired. Lennart? >>

1 1

Re: Windows Install Issues for erf (and statistics)
by Simon Marlow 23 Sep '09

23 Sep '09

On 23/09/2009 10:35, Dominic.Steinitz(a)barclayscapital.com wrote: > > >> -----Original Message----- >> From: Simon Marlow [mailto:marlowsd@gmail.com] >> Sent: 22 September 2009 13:44 >> To: Dominic Steinitz >> Cc: Lennart Augustsson; Steinitz, Dominic: Markets (LDN); > cabal-devel(a)haskell.org; libraries(a)haskell.org >> Subject: Re: Windows Install Issues for erf (and statistics) >> >> Are you sure the problem you had isn't just that the C erfc function > is not available on Windows? >> >> Oh, perhaps the problem that Lennart is referring to is that when GHCi > loads up a package it requires that all the symbols in> the package can > be resolved, whereas when you statically link a .a library we only have > to resolve the symbols required by the> library modules that the > program actually refers to. > > That may be it. If I use ghc all works: > > C:\p4wksp\steinitd_fpf_virgin_ws\FPF_Dev.br\src>ghc > -package-conf=..\ThirdParty\ghc\ghc-6.10.1\fpf.package.conf --make > Paths.hs -o Paths.exe > > C:\p4wksp\steinitd_fpf_virgin_ws\FPF_Dev.br\src>Paths.exe > [0.0,-0.3701728565440763,-0.43078071862053197,-1.2205246923473059,-1.294 > 0085383906827] > > But if I use ghci: > > Prelude> :l Paths.hs > [1 of 1] Compiling Main ( Paths.hs, interpreted ) > Ok, modules loaded: Main. > *Main> main > Loading package syb ... linking ... done. > Loading package base-3.0.3.0 ... linking ... done. > Loading package bytestring-0.9.1.4 ... linking ... done. > Loading package Win32-2.2.0.0 ... linking ... done. > Loading package old-locale-1.0.0.1 ... linking ... done. > Loading package time-1.1.2.2 ... linking ... done. > Loading package uvector-0.1.0.4 ... linking ... done. > Loading package erf-1.0.0.0 ... linking ...<interactive>: > C:/p4wksp/steinitd_fpf_virgin_ws/FPF_Dev.br/src/../thirdparty/haskell_pa > ckages\erf-1.0.0.0\ghc-6.10.1\HSerf-1.0.0.0.o: unknown symbol `_erfc' > : unable to load package `erf-1.0.0.0' > > >> So one workaround would be to link in a dummy erfc() function, or > alternatively hack the erf pacakge so that it omits the >> offending parts on Windows. > > I'll probably do the latter for the time being but is there something > that could be done to ghci to stop it complaining in the case of other > similar situations? It would mean doing some kind of lazy linking, and would be pretty tricky I think. In any case, it will only fail again when we start using shared libraries with GHCi, so I don't think it's worth tackling. (or maybe it will work with shared libraries; either way I don't think we should worry about doing anything in GHC's linker :-) Cheers, Simon

1 0

[Hackage] #580: -Wno-attributes rejected by gcc while testing for libraries during configure
by Hackage 22 Sep '09

22 Sep '09

#580: -Wno-attributes rejected by gcc while testing for libraries during configure ---------------------------------+------------------------------------------ Reporter: brian0 | Owner: Type: defect | Status: new Priority: normal | Milestone: Component: cabal-install tool | Version: 1.6.0.2 Severity: normal | Keywords: Difficulty: unknown | Ghcversion: Platform: Windows | ---------------------------------+------------------------------------------ Windows GHC 6.10.4 Cabal 0.6.2 cabal-install 0.6.2 During configure, I think cabal-install is testing for the existence of various libraries by compiling empty "main() {}" C sources. But the command it constructs to do the compile contains -Wno-attributes, which gcc 3.4.5 doesn't understand. > cabal configure -v3 ... ("C:\\brian\\tools\\ghc-6.10.4\\gcc.exe",["-BC:\\brian\\tools\\ghc-6.10.4 \\gcc- lib","-IC:\\brian\\tools\\ghc-6.10.4\\include\\mingw","C:\\DOCUME~1\\ADMINI~1\\LOCALS~1\\Temp\\388.c","-o","C:\\DOCUME~1\\ADMINI~1\\LOCALS~1\\Temp\\388","-lwxmsw28","-LC:\\SourceCode\\Libraries\\wxWidgets2.8\\lib\\gcc_dll","-mthreads ","-Wno-attributes","-fmessage-length=0","-pipe","-Wno-ctor-dtor- privacy"]) C:\brian\tools\ghc-6.10.4\gcc.exe returned ExitFailure 1 with error message: cc1.exe: error: unrecognized command line option "-Wno-attributes" cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C -- Ticket URL: <http://hackage.haskell.org/trac/hackage/ticket/580> Hackage <http://haskell.org/cabal/> Hackage: Cabal and related projects

1 2

Re: Windows Install Issues for erf (and statistics)
by Simon Marlow 22 Sep '09

22 Sep '09

I couldn't find anything - happy to look into it if someone points me to the ticket. Cheers, Simon On 20/09/2009 12:22, Lennart Augustsson wrote: > I complained about the very same thing, I think there's even a ghc bug > report about it. > It's something about how symbols are looked up and loaded in ghci. > I've not been able to come up with a workaround either. > > -- Lennart > > On Sun, Sep 20, 2009 at 3:37 PM, Dominic Steinitz<dominic(a)steinitz.org> wrote: >> The package statistics uses the package erf. Doing cabal install statistics >> works fine but when I try to use anything I get: >> >>> Loading package syb ... linking ... done. >>> Loading package base-3.0.3.0 ... linking ... done. >>> Loading package erf-1.0.0.0 ... linking ...<interactive>: >>> C:\Program Files\Haskell\erf-1.0.0.0\ghc-6.10.1\HSerf-1.0.0.0.o: unknown >>> symbol >>> `_erfc' >>> : unable to load package `erf-1.0.0.0' >> >> I assume that erf is looking for some C functions which are available on >> linux but not windows. >> >> I'm not sure what the solution is. Should cabal complain? Should there be >> some documentation on the erf homepage telling windows users what to do? Or >> at least that it doesn't work on windows? >> >> Dominic. >> >> _______________________________________________ >> Libraries mailing list >> Libraries(a)haskell.org >> http://www.haskell.org/mailman/listinfo/libraries >> > _______________________________________________ > Libraries mailing list > Libraries(a)haskell.org > http://www.haskell.org/mailman/listinfo/libraries

3 3

[Hackage] #586: haddock and hssource for executables
by Hackage 22 Sep '09

22 Sep '09

#586: haddock and hssource for executables ---------------------------------+------------------------------------------ Reporter: bastl | Owner: Type: defect | Status: new Priority: normal | Milestone: Component: cabal-install tool | Version: Severity: normal | Keywords: Difficulty: unknown | Ghcversion: Platform: Linux | ---------------------------------+------------------------------------------ "cabal haddock --executables" produces documentation for all modules Main depends on. "cabal haddock --executables --hyperlink-with-source" only generates source for main (but links to the dependent modules, which results in broken links.) Cabal 1.6.0.3, cabal-install 0.6.2 ghc 6.10.3 ubuntu 9.04 -- Ticket URL: <http://hackage.haskell.org/trac/hackage/ticket/586> Hackage <http://haskell.org/cabal/> Hackage: Cabal and related projects

1 1

[Hackage] #320: cooperation with Windows Vista's User Access Control
by Hackage 20 Sep '09

20 Sep '09

#320: cooperation with Windows Vista's User Access Control ----------------------------+----------------------------------------------- Reporter: Toxaris | Owner: Type: enhancement | Status: new Priority: normal | Milestone: Component: Cabal library | Version: 1.4.0.1 Severity: normal | Keywords: Difficulty: normal | Ghcversion: 6.8.2 Platform: Windows | ----------------------------+----------------------------------------------- Installation of a cabal package under Windows Vista with UAC activated may fail even when working as administrator, because cabal doesn't request the necessary rights to write to, e.g., "c:\Program Files\Haskell\<whatever>". A workaround is to start an "Administrator console" to start Cabal from a process which already acquired admin privileges. Cabal should request the necessary rights instead of failing. cabal-install should check in advance whether the target destination is writeable and fail early or request the necessary rights. (currently, cabal-install fails after compiling all dependencies. After starting cabal-install again from an Administrator console, everything has to be build again). {{{ C:\Downloads\Haskell\typeof-0.1.1>runhaskell Setup install Setup: C:\Program Files\Haskell\doc\typeof-0.1.1: copyFile: permission denied (P ermission denied) }}} -- Ticket URL: <http://hackage.haskell.org/trac/hackage/ticket/320> Hackage <http://haskell.org/cabal/> Hackage: Cabal and related projects

1 9

patch applied (cabal): Update dependencies
by Ian Lynagh 20 Sep '09

20 Sep '09

Sun Sep 20 08:24:11 PDT 2009 Ian Lynagh <igloo(a)earth.li> * Update dependencies M ./Cabal.cabal -3 +3 View patch online: http://darcs.haskell.org/cabal/_darcs/patches/20090920152411-3fd76-4b6970a3…

1 0

patch applied (cabal): Simplify the use of simplifyVersionRange
by Duncan Coutts 20 Sep '09

20 Sep '09

Sun Sep 20 08:34:33 PDT 2009 Duncan Coutts <duncan(a)haskell.org> * Simplify the use of simplifyVersionRange Ignore-this: fd41587284e064b185cd1db423ddf493 Use the simplifyDependency wrapper M ./Distribution/Simple/Configure.hs -5 +4 View patch online: http://darcs.haskell.org/cabal/_darcs/patches/20090920153433-adfee-fdf2408a…

1 0

patch applied (cabal): Fix Integer defaulting
by Duncan Coutts 20 Sep '09

20 Sep '09

Sun Sep 20 08:32:49 PDT 2009 Duncan Coutts <duncan(a)haskell.org> * Fix Integer defaulting Ignore-this: a747789b708b34cf3589a4c5a9fdb9cd M ./Distribution/Version.hs -1 +1 View patch online: http://darcs.haskell.org/cabal/_darcs/patches/20090920153249-adfee-05505269…

1 0

patch applied (cabal): Don't simplify empty/inconsistent version ranges
by Duncan Coutts 20 Sep '09

20 Sep '09

Sun Sep 20 08:16:47 PDT 2009 Duncan Coutts <duncan(a)haskell.org> * Don't simplify empty/inconsistent version ranges Ignore-this: aeddcb5625dd29963036c07be5a9c2da They all get squashed to ">1 && <1" which while canonical is not helpful. M ./Distribution/Version.hs -3 +15 M ./tests/Test/Distribution/Version.hs -1 +3 View patch online: http://darcs.haskell.org/cabal/_darcs/patches/20090920151647-adfee-0ee1bdf5…

1 0