Hannes Siebenhandl pushed to branch wip/fendor/homeunit-is-just at Glasgow Haskell Compiler / GHC Commits: 749d2448 by Luite Stegeman at 2026-09-15T14:07:01-04:00 rts: handle large CONSTR closures in compacting GC The function update_fwd_large in the compacting GC could run into an unexpected object with the following error: internal error: update_fwd_large: unknown/strange object 1 Closure type 1 is CONSTR. This patch adds cases for CONSTR and CONSTR_NOCAF. This is the same problem as #27434 (large AP closures, fixed by cca0d58963), which missed this case. Fixes #27649 - - - - - 177d6155 by Luite Stegeman at 2026-09-15T14:07:02-04:00 testsuite: fix T27434 test with compacting GC Ensure that the interpreter is actually run with the compacting GC - - - - - 5796aa63 by Luite Stegeman at 2026-09-15T14:07:49-04:00 rts: initialise the stack frame header for mask_frame and apply_mask_frame We must leave the stack in consistent state before jumping to mask_frame or apply_mask_frame because they may result. Failing to do so could lead to a crash if there were waiting exceptions. Fixes #27651 - - - - - 2486cc92 by Simon Peyton Jones at 2026-09-15T14:08:36-04:00 Re-introduce the "weird SpecDict" case In this commit commit f80375dd4945350a1d784e436975b48b9c736eaf Author: Simon Peyton Jones <simon.peytonjones@gmail.com> Date: Sun Jun 29 15:26:58 2025 +0100 Refactor of Specialise.hs I removed a test for a dictionary with unbound type variables. This turned out to be wrong; see #27629. So this MR re-introduces it. - - - - - 8e09a46f by Duncan Coutts at 2026-09-15T20:11:35-04:00 Refactor (and rename) removeFromQueues, to simplify I/O managers Rename it to unblockAndAppendToRunQueue which better reflects what it is intended to do. The post-condition for unblockAndAppendToRunQueue is that the TSO is on the run queue or it is in the process of migrating to another cap. Previously it achieved that by always directly adding the TSO to the run queue itself. But this actually made things more complicated for the I/O managers, because it meant they needed a separate code path for notifying for cancellation compared to notifying for completion. The general notification code would always add the TSO to the run queue itself. So the improvement is to allow different cases in unblockAndAppendToRunQueue to achieve the same outcome in different ways: either directly adding to the run queue or calling helper functions that do so themselves. This then allows the new I/O managers to share code between the sync and async cancellation, and to reuse their notifyIOCompletion helpers for cancellation. This avoids a source of bugs where the completion path may be updated but the cancellation path may be forgotten, or similarly in future for sync/async operations. Update all the existing in-RTS I/O managers, and the posix timeout code. - - - - - d668782c by Duncan Coutts at 2026-09-15T20:11:35-04:00 Document that awaitCompletedTimeoutsOrIO expects an empty run queue This was true before but implicit and not relied on much. It's better to be explicit, and allow things to depend on it. - - - - - 11d938bb by Duncan Coutts at 2026-09-15T20:11:35-04:00 Store the I/O opcode and fd in the StgAsyncIOOp This will be useful in several I/O managers and it is handy for logging and debugging. It also doesn't increase the size of the StgAsyncIOOp structure. There was enough spare padding space already. Update the poll I/O manager to set the new fields. Add a helper function to convert the enum IOReadOrWrite into the enum IOOpCode. Also change IOReadOrWrite to be an enum without a typedef, for consistency with other enumerations in IOManager.h - - - - - bfa87882 by Duncan Coutts at 2026-09-15T20:11:36-04:00 Add a new I/O manager based on select() Yes, this is the second such I/O manager, but it is a modern re-implementation based on the new in-RTS I/O manager infrastructure. So it is cleaner and faster than the old select I/O manager. Why do we need another I/O manager based on select? Why isn't the poll() one good enough as a baseline portable unix I/O manager? Because macOS. Apple Inc. is why we cannot have nice things. The man page for poll on macOS documents the fact that it does not work. At least, it does not work for all files. Specifically, it does not work for device files. Whereas macOS select() does work for device files. Aaaaarg! We _do_ want to deprecate and remove the old select I/O manager, but due to macOS we cannot do that until we have a replacement. This is that replacement. Until of course a nice new k-queue I/O manager arrives, which could become the new default for macOS and FreeBSD. Interestingly, this select I/O manager is actually faster than the poll one, on Linix, in some circumstances: specifically when many Haskell threads are waiting on the same fd. The poll I/O manager does O(n) work for n threads waiting on I/O, whereas the select one does O(fds) work for the number of fds that threads are waiting on. Usually this is 1:1, so it's not noticable, but one can concoct extreme benchmarks to show the difference. - - - - - 8e9de15a by Duncan Coutts at 2026-09-15T20:11:36-04:00 Minor updates in the poll I/O manager to keep in sync with select This keeps it in sync with select one. The changes are based on code review while implementing the new select I/O manager. The two I/O managers are so similar in structure that it makes sense to try to minimise the diff between them. This should aid understanding, and fixes to both in future. - - - - - 222668bb by Duncan Coutts at 2026-09-15T20:11:36-04:00 Document the new select I/O manager in the user guide in the RTS section about I/O managers. And add a changelog entry. - - - - - 0f48735b by Cheng Shao at 2026-09-15T20:12:23-04:00 Revert "wasm: workaround WebKit bug in dyld" This reverts commit c9b8465c2c338176fcab9d197e9d31f4aee11f68. The underlying webkit bug has been fixed in https://commits.webkit.org/314219@main. Closes #27564. - - - - - 809294f1 by Luite Stegeman at 2026-09-15T20:13:08-04:00 rts: make stg_threadLabelzh return a valid pointer for unlabeled threads. This fixes a segfault in the GC caused by stg_threadLabelzh returning a 0 pointer in a GC pointer field. stg_threadLabelzh returns a tuple of type (# Int#, ByteArray# #). If a thread has no label, the second field is unused. We must still return a valid heap object pointer. Instead of returning 0, we now return stg_DEAD_SLOT_closure. fixes #27618 - - - - - e2d57026 by Luite Stegeman at 2026-09-15T20:13:54-04:00 JS: fix selector thunk handling fix a bug where entering a selector thunk could lead to a crash if the selected field was still a thunk. fixes #27788 - - - - - 1b4a622f by sheaf at 2026-09-17T02:39:13-04:00 Improvements to type/data family handling This commit makes several improvements to the treatment of type and data families in GHC: - We consistently use "type family" instead of "type synonym family" to avoid a confusion with type synonyms. For example: - OpenSynFamilyTyCon ==> OpenTypeFamilyTyCon - ClosedSynFamilyTyCon => ClosedTypeFamilyTyCon - Various functions that were specific to data families have been renamed to make this clear. For example: - tyConFamInst_maybe ==> tyConDataFamInst_maybe - isFamInstTyCon ==> isDataFamInstTyCon - 'FamTyConFlav' has been refactored so that all closed type families share a single 'ClosedTypeFamilyTyCon' constructor. The corresponding 'IfaceFamTyConFlav' type was updated similarly. This is then used to tidy up the implementation of GHC.Core.FamInstEnv.reduceTyFamApp_maybe. - - - - - c5aa9098 by sheaf at 2026-09-17T02:39:13-04:00 Small refactor of lookupFamInstEnv This commit reworks the code for looking up family instances in GHC.Core.FamInstEnv, reducing duplication a little bit. No change in behaviour. - - - - - a3ad4588 by sheaf at 2026-09-17T02:39:14-04:00 Use a type family for boxing unboxed types This commit overhauls the way in which unboxed types are boxed, as per the updated Note [Boxing constructors] in GHC.Builtin.WiredIn.Types.Box. The main change is to allow boxing to be parametrised by representation, e.g. making 'Box ty' a valid type. We achieve this by implementing 'Box' using a closed type family: newtype Box (a :: TYPE r) = Box (BoxTF r) type BoxTF :: RuntimeRep -> Type type family BoxTF r where BoxTF IntRep = BoxInt BoxTF Int8Rep = BoxInt8 BoxTF WordRep = BoxWord BoxTF LiftedRep = Any @Type BoxTF (TupleRep [r1, r2]) = (BoxTF r1, BoxTF r2) ... BoxTF (SumRep rs) = BoxSum rs This new design solves the following problems: - It allows boxing a type whose 'RuntimeRep' has not yet been determined (e.g. because we only learn the 'RuntimeRep' after constraint solving). That is, 'Box @r a' is a perfectly valid type even if 'r' is an unfilled metavariable. This is a requirement to fix #25065 (in which we need to box a type whose 'RuntimeRep' is only filled in during constraint solving). - It handles boxing of unboxed tuples and unboxed sums, via recursive boxing. See Note [Boxing TupleRep and SumRep] in GHC.Builtin.WiredIn.Types.Box. 'Box', 'BoxTF' and all of the boxing data constructors are defined in a new 'ghc-internal' module, 'GHC.Internal.Box'. This module contains nothing but wired-in declarations, and GHC never loads its interface on account of a wired-in thing (GHC.Builtin.Modules.isWiredInOnlyModule); see Note [Loading instances for wired-in things] in GHC.Iface.Load. The individual boxing data constructors are deliberately left as an internal implementation detail, and not exported. The intended API is via the two new magic 'Id's: box :: forall {r} (a :: TYPE r). a -> Box a unbox :: forall {r} (a :: TYPE r). Box a -> a exported from 'GHC.PrimOps' (in 'ghc-experimental'). The old boxing data types (IntBox, WordBox, FloatBox, DoubleBox, DictBox) are no longer exported from base (CLC proposal #421). We use this new design to consistently desugar: - parallel comprehensions (GHC.HsToCore.ListComp.{deListComp,dsMcStmt}) - then/group/using statements (GHC.HsToCore.ListComp.{dsTransStmt,dsMcStmt}) - recursive do blocks (mdo/rec) (GHC.HsToCore.Expr.dsDo) - arrows (GHC.HsToCore.Arrows) by consistently using 'box'/'unbox' to deal with unboxed types being put into big tuples. We also adapt 'GHC.Tc.Gen.Match.{tcMcStmt,tcDoStmt}' to create fresh /representation-polymorphic/ type variables for the binders that we are going to put into a big tuple (previously, GHC only allowed lifted types in that position). These desugaring of box and unbox is explained in Note [Desugaring box & unbox] in GHC.Core.Make.Box. Roughly speaking, the desugaring looks like: box @r @ty e ==> K e unbox @r @ty e ==> case e of K x -> x where 'K' is the boxing data constructor at RuntimeRep 'r'. It's slightly more complicated than that in practice: we first need to insert a cast (see Note [The canonical type of a RuntimeRep]) using the new 'CanonicalProv' 'UnivCoProvenance', and unboxed tuples/sums need recursive logic explained in Note [box/unbox for unboxed tuples and sums], including a specific 'BoxSum' datatypes for unboxed sum (which also needed a wired-in type-level list indexing type family (!!)). The desugaring happens in two ways: - Occurrences of 'box'/'unbox' emitted by the typechecker are eliminated in the 'ds_app_var' case of GHC.HsToCore.Expr. - Other code that needs to box/unbox emits the appropriate code inline. This includes the big tuple machinery of GHC.Core.Make used by the desugarer (GHC.HsToCore.{Utils,Binds,Arrows,ListComp}) as well as the float-out pass (GHC.Core.Opt.SetLevels). Core Lint checks that no occurrence of 'box'/'unbox' survives desugaring. On the way, we overhaul the litany of big tuple functions by introducing data BigTupleLayout = BoxedElements | BareElements to distinguish the two kinds of "big tuples" that GHC routinely deals with; for example 'mkBigCoreVarTupSolo' becomes 'mkBigCoreVarTup BareElements'. All of this code is moved to the new module GHC.Core.Make.BigTuple. Fixes #20864 #22336 #22473 #25065 #27331 ------------------------- Metric Decrease: T9872a ------------------------- - - - - - 4cf7628a by Evgeny Malyshev at 2026-09-17T02:39:56-04:00 Fix the CompactionFailed documentation link to compact The old Haddock reference links into base instead of ghc-compact. Use an explicit URL because ghc-compact depends on base, not vice versa. Fixes #27558 Assisted-By: OpenAI Codex - - - - - 098bba70 by Facundo Domínguez at 2026-09-17T14:57:41-04:00 Remove the call to hoistFlag from processCmdLineP This call was undesirable because it was causing a reconstruction of the list of flag processors. Even relying on list fusion would not be sufficient because we want to replace the list with a data structure with faster lookups to address #25763. The removal is done in two moves: * We move CmdLineP to CmdLine.hs * Then we move the effect of hoisting to processArgs via a new function hoistEwM - - - - - e01799c7 by Facundo Domínguez at 2026-09-17T14:57:42-04:00 Do not create duplicate flag processors for the -W flag This makes simpler implementing the command line parser with a trie map holding flag processors. If we were to allow duplicate flag processors for any flag, the trie map would need to be a multimap. - - - - - 3875b257 by Facundo Domínguez at 2026-09-17T14:57:42-04:00 Replace the list of flag processors with a trie map in `processArgs` Previously `GHC.Driver.CmdLine.findArg` was called for each command-line argument, doing a linear search on the list of flag processors each time. This was somewhat costly as the list of flag processor has near 2000 elements. A lookup with a trie map is faster in general, but the speed up is only noticeable when calling `GHC.Driver.CmdLine.processArgs` sufficient times, so the amount of lookups piles up. This could happen in large projects with many units each having many dependencies. If only a module needs to be recompiled, the user still needs to wait for all of the flag parsing to complete. The benchmark at testsuite/tests/perf/compiler/cmdline-parser shows a 10x speed up when using the trie. The trie map is implemented in `GHC.Data.StringTrie`. The design is explained in Note [Processing command line argument fast] in GHC.Driver.Session. The commit also: * adds two property-based tests for trie map operations, * adds a benchmark of the command line parser, and * renames the predicate `arg_ok` to `valid_flag_suffix` to decide what flag processor should be used when there are multiple matching prefixes on a flag. Fixes #25763. - - - - - 5236634a by Andreas Klebinger at 2026-09-17T14:58:24-04:00 Compile Word64{Map,Set} with -O2 always. This is the hottest code and even if we build GHC with -O0 otherwise -O2 pays off for these modules. Fixes #27814. - - - - - 545fd4fb by ARATA Mizuki at 2026-09-22T15:03:24-04:00 Change the C types of hs_{bitrev,bswap}{16,32} to match the Haskell types bitReverse{16,32}# and byteSwap{16,32}# have the type Word# -> Word#, but their C correspondents took and returned StgWord{16,32}. The mismatch on bitReverse16# led to the problem reported in #27299. Although no similar issue is reported for bitReverse32# and byteSwap{16,32}#, it seemed wise to change them proactively. This commit fixes the mismatch by changing the C type. Fixes #27299 - - - - - bf17f289 by fendor at 2026-09-22T15:04:05-04:00 Don't lose instances from shadowed imported modules with the same name When we look for instances below the current module, we need to check the unit id as well when we check for whether the module is the current module, otherwise we ignore modules we import that have the same name as the import module. Adds regression test. - - - - - 53eead15 by Wolfgang Jeltsch at 2026-09-24T20:12:03-04:00 Correct the documentation of `explicitUnits` Resolves #27787. - - - - - 35bf6f4b by Simon Jakobi at 2026-09-24T20:12:49-04:00 Remove stale specHeader bullet from Note [Don't make fillers for constraint types] The Note said that Specialise.specHeader also calls mkAbsentFiller. abfc224a27c removed that call: the specialiser no longer drops dead arguments at all, see Note [Do not drop dead args from specialisations] in GHC.Core.Opt.Specialise. Assisted-by: Claude Fable 5.1 - - - - - 1abef1ef by Wolfgang Jeltsch at 2026-09-25T17:02:07-04:00 Improve the `mhu-closure` makefile - - - - - a79a68ea by Wolfgang Jeltsch at 2026-09-25T17:02:07-04:00 Make `ghci-multi` hide all unneeded packages - - - - - d6e72450 by Wolfgang Jeltsch at 2026-09-25T17:02:07-04:00 Improve the definition of the home unit closure property - - - - - c9a2766d by Wolfgang Jeltsch at 2026-09-25T17:02:07-04:00 Re-implement the home unit closure check Compared to the previous implementation, the new one has the following advantages: * It is correct. - It distinguishes between units that have the same unit ID but different ABI hashes. - When `-hide-all-packages` is not used, it considers as home unit dependencies also units that are made implicitly available because they are in the package database. * It seems to be faster in usual settings. - In particular, it does not have a preparation phase in which it merges the dependency information from all home units, so that its running time does not grow linearly with the size of the package database in normal Cabal scenarios. * It is (hopefully) clearer. * It is better documented. - - - - - fa96acf8 by Wolfgang Jeltsch at 2026-09-25T17:02:07-04:00 Remove erroneous GHC flag in `hadrian-multi` The flag was `-Werror=-Wno-error=incomplete-record-selectors`. Its purpose was to permit incomplete record selectors, but because of the illegal combination of `-Werror=` and `-Wno-error` it was ignored, without any negative consequences. - - - - - 9f48a5b9 by Alan Zimmerman at 2026-09-25T17:02:50-04:00 EPA: Add specific layout field to AnnList Up to now AnnList has effectively served to represent lists of things having layout, regardless of whether they do or not. In Haskell, layout is optional in many places, as there is also an alternative syntax using braces and semi-colons, which is free-form. This commit introduces AnnListLayout, a data structure capturing this distinction. It is deliberately set up similarly to EpLayout, so that these two can be merged in time. The transition is done mechanically, where AnnListBraces is not used yet, the original Nothing case maps to AnnListNoLayout, and the Just case to AnnListLayout. Later commits will fine tune these against the actual parser layout. - - - - - e108bd77 by fendor at 2026-09-29T11:35:06+02:00 `HomeUnitEnv` should always have a concrete `HomeUnit` The `HomeUnit` describes what kind of home unit a particular `HomeUnitEnv` is and its `UnitId`. To get a `HomeUnit`, we need to initialise the `UnitState` via `initUnits` otherwise, we can't tell whether the `HomeUnit` is a definite one, or an indefinite one, for example a backpack signature file. That's why previously we maintained a `Maybe HomeUnit`. However, a `HomeUnitEnv` always has at least a `UnitId` (accessible via `DynFlags`). We can fake a `HomeUnit` until we have actually initialised the home unit and assume it is not a backpack unit. This avoids many partial functions that should have never been partial in the first case. - - - - - 6251dc45 by fendor at 2026-09-29T11:40:20+02:00 Use `panic` instead of dummy value for initial HomeUnit - - - - - 231 changed files: - .gitlab-ci.yml - + changelog.d/25763-cmdline-opt - + changelog.d/26610 - + changelog.d/T27629 - + changelog.d/T27788-js-selector - + changelog.d/boxing-family - + changelog.d/clc-421 - + changelog.d/fix-compacting-gc-constr-27649 - + changelog.d/fix-control0-mask-trampoline - + changelog.d/fix-threadlabel-segfault-27618 - + changelog.d/select-io-manager - compiler/GHC.hs - compiler/GHC/Builtin.hs - compiler/GHC/Builtin/KnownKeys.hs - compiler/GHC/Builtin/Modules.hs - compiler/GHC/Builtin/Uniques.hs - compiler/GHC/Builtin/WiredIn/Ids.hs - compiler/GHC/Builtin/WiredIn/Prim.hs - compiler/GHC/Builtin/WiredIn/TypeLits.hs - compiler/GHC/Builtin/WiredIn/Types.hs - + compiler/GHC/Builtin/WiredIn/Types/Box.hs - compiler/GHC/Core/Coercion.hs - compiler/GHC/Core/Coercion/Axiom.hs - compiler/GHC/Core/DataCon.hs - compiler/GHC/Core/FamInstEnv.hs - compiler/GHC/Core/Lint.hs - compiler/GHC/Core/Make.hs - + compiler/GHC/Core/Make/BigTuple.hs - + compiler/GHC/Core/Make/Box.hs - compiler/GHC/Core/Opt/SetLevels.hs - compiler/GHC/Core/Opt/Specialise.hs - compiler/GHC/Core/Opt/WorkWrap/Utils.hs - compiler/GHC/Core/TyCo/Ppr.hs - compiler/GHC/Core/TyCo/Rep.hs - compiler/GHC/Core/TyCon.hs - compiler/GHC/Core/Type.hs - compiler/GHC/CoreToStg.hs - compiler/GHC/CoreToStg/AddImplicitBinds.hs - + compiler/GHC/Data/StringTrie.hs - compiler/GHC/Data/Word64Map/Internal.hs - compiler/GHC/Data/Word64Map/Strict/Internal.hs - compiler/GHC/Data/Word64Set/Internal.hs - compiler/GHC/Driver/Backpack.hs - compiler/GHC/Driver/CmdLine.hs - compiler/GHC/Driver/Downsweep.hs - compiler/GHC/Driver/Env.hs - compiler/GHC/Driver/Errors/Ppr.hs - compiler/GHC/Driver/Errors/Types.hs - compiler/GHC/Driver/Main/Compile.hs - compiler/GHC/Driver/Main/Hsc.hs - compiler/GHC/Driver/Main/Passes.hs - compiler/GHC/Driver/Make.hs - compiler/GHC/Driver/Pipeline/Execute.hs - compiler/GHC/Driver/Session.hs - compiler/GHC/Driver/Session/Units.hs - compiler/GHC/Hs/Utils.hs - compiler/GHC/HsToCore/Arrows.hs - compiler/GHC/HsToCore/Binds.hs - compiler/GHC/HsToCore/Expr.hs - compiler/GHC/HsToCore/ListComp.hs - compiler/GHC/HsToCore/Usage.hs - compiler/GHC/HsToCore/Utils.hs - compiler/GHC/Iface/Decl.hs - compiler/GHC/Iface/Errors.hs - compiler/GHC/Iface/Load.hs - compiler/GHC/Iface/Rename.hs - compiler/GHC/Iface/Syntax.hs - compiler/GHC/Iface/Tidy.hs - compiler/GHC/IfaceToCore.hs - compiler/GHC/Linker/Deps.hs - compiler/GHC/Parser.y - compiler/GHC/Parser/Annotation.hs - compiler/GHC/Parser/PostProcess.hs - compiler/GHC/Rename/Names.hs - compiler/GHC/Stg/Lint.hs - compiler/GHC/StgToJS/Apply.hs - compiler/GHC/StgToJS/CodeGen.hs - compiler/GHC/StgToJS/Linker/Linker.hs - compiler/GHC/StgToJS/Symbols.hs - compiler/GHC/Tc/Deriv.hs - compiler/GHC/Tc/Deriv/Generate.hs - compiler/GHC/Tc/Deriv/Generics.hs - compiler/GHC/Tc/Gen/HsType.hs - compiler/GHC/Tc/Gen/Match.hs - compiler/GHC/Tc/Gen/Pat.hs - compiler/GHC/Tc/Gen/Splice.hs - compiler/GHC/Tc/Instance/Family.hs - compiler/GHC/Tc/Instance/Typeable.hs - compiler/GHC/Tc/Module.hs - compiler/GHC/Tc/Solver/Default.hs - compiler/GHC/Tc/Solver/FunDeps.hs - compiler/GHC/Tc/TyCl.hs - compiler/GHC/Tc/TyCl/Instance.hs - compiler/GHC/Tc/Utils/Backpack.hs - compiler/GHC/Tc/Utils/Env.hs - compiler/GHC/Tc/Utils/Monad.hs - compiler/GHC/Types/CompleteMatch.hs - compiler/GHC/Types/Id.hs - compiler/GHC/Types/Id/Info.hs - compiler/GHC/Types/Id/Make.hs - compiler/GHC/Types/TyThing.hs - compiler/GHC/Types/TyThing/Ppr.hs - compiler/GHC/Types/Unique.hs - compiler/GHC/Unit/Env.hs - compiler/GHC/Unit/Finder.hs - compiler/GHC/Unit/Home.hs - compiler/GHC/Unit/Home/Graph.hs - compiler/GHC/Unit/State.hs - compiler/ghc.cabal.in - docs/users_guide/runtime_control.rst - ghc/GHC/Driver/Session/Mode.hs - ghc/GHCi/UI.hs - hadrian/ghci-multi-cabal.in - libraries/base/src/GHC/Base.hs - libraries/base/src/GHC/Exts.hs - libraries/base/src/GHC/RTS/Flags.hs - libraries/ghc-internal/ghc-internal.cabal.in - libraries/ghc-internal/include/RtsIfaceSymbols.h - + libraries/ghc-internal/src/GHC/Internal/Box.hs - libraries/ghc-internal/src/GHC/Internal/Exts.hs - libraries/ghc-internal/src/GHC/Internal/IO/Exception.hs - libraries/ghc-internal/src/GHC/Internal/RTS/Flags.hsc - libraries/ghc-internal/src/GHC/Internal/TypeNats.hs - libraries/ghc-internal/src/GHC/Internal/Types.hs - linters/lint-codes/LintCodes/Static.hs - rts/ContinuationOps.cmm - rts/IOManager.c - rts/IOManager.h - rts/IOManagerInternals.h - rts/Prelude.h - rts/PrimOps.cmm - rts/RaiseAsync.c - rts/StgMiscClosures.cmm - rts/configure.ac - rts/include/rts/Flags.h - rts/include/rts/RtsToHsIface.h - rts/include/rts/storage/Closures.h - rts/include/stg/MiscClosures.h - rts/include/stg/Prim.h - rts/posix/Poll.c - rts/posix/Poll.h - + rts/posix/SelectBis.c - + rts/posix/SelectBis.h - rts/posix/Timeout.c - rts/posix/Timeout.h - rts/prim/bitrev.c - rts/prim/bswap.c - rts/rts.cabal - rts/sm/Compact.c - rts/sm/Evac.c - testsuite/tests/MiniQuickCheck.hs - testsuite/tests/arrows/should_run/all.T - + testsuite/tests/arrows/should_run/arrowrun005.hs - + testsuite/tests/arrows/should_run/arrowrun005.stdout - testsuite/tests/count-deps/CountDepsParser.stdout - + testsuite/tests/deSugar/should_compile/T25065a.hs - testsuite/tests/deSugar/should_compile/all.T - + testsuite/tests/deSugar/should_run/T20864.hs - + testsuite/tests/deSugar/should_run/T20864.stdout - + testsuite/tests/deSugar/should_run/T25065b.hs - + testsuite/tests/deSugar/should_run/T25065b.stdout - testsuite/tests/deSugar/should_run/all.T - testsuite/tests/driver/all.T - testsuite/tests/driver/multipleHomeUnits/mhu-closure/Makefile - testsuite/tests/driver/multipleHomeUnits/mhu-closure/mhu-closure.stderr - testsuite/tests/driver/multipleHomeUnits/mhu-closure/mhu-closure.stdout - + testsuite/tests/driver/stringtrie.hs - + testsuite/tests/driver/stringtrie.stdout - testsuite/tests/ghc-api/exactprint/T22919.stderr - testsuite/tests/ghc-api/exactprint/ZeroWidthSemi.stderr - + testsuite/tests/ghci/prog-mhu008/Makefile - + testsuite/tests/ghci/prog-mhu008/a/M.hs - + testsuite/tests/ghci/prog-mhu008/all.T - + testsuite/tests/ghci/prog-mhu008/b/M.hs - + testsuite/tests/ghci/prog-mhu008/prog-mhu008.script - + testsuite/tests/ghci/prog-mhu008/prog-mhu008.stdout - + testsuite/tests/ghci/prog-mhu008/unitA - + testsuite/tests/ghci/prog-mhu008/unitB - + testsuite/tests/indexed-types/should_run/T27331.hs - + testsuite/tests/indexed-types/should_run/T27331.stdout - + testsuite/tests/indexed-types/should_run/T27331b.hs - + testsuite/tests/indexed-types/should_run/T27331b.stdout - + testsuite/tests/indexed-types/should_run/T27331b_Plugin.hs - testsuite/tests/indexed-types/should_run/all.T - testsuite/tests/interface-stability/base-exports.stdout - testsuite/tests/interface-stability/base-exports.stdout-javascript-unknown-ghcjs - testsuite/tests/interface-stability/base-exports.stdout-mingw32 - testsuite/tests/interface-stability/ghc-experimental-exports.stdout - testsuite/tests/interface-stability/ghc-experimental-exports.stdout-mingw32 - testsuite/tests/interface-stability/ghc-prim-exports.stdout - testsuite/tests/interface-stability/ghc-prim-exports.stdout-mingw32 - + testsuite/tests/javascript/T27788.hs - + testsuite/tests/javascript/T27788.stdout - testsuite/tests/javascript/all.T - testsuite/tests/linters/notes.stdout - testsuite/tests/module/mod185.stderr - testsuite/tests/parser/should_compile/DumpParsedAst.stderr - testsuite/tests/parser/should_compile/DumpParsedAstComments.stderr - testsuite/tests/parser/should_compile/DumpRenamedAst.stderr - testsuite/tests/parser/should_compile/DumpSemis.stderr - testsuite/tests/parser/should_compile/KindSigs.stderr - testsuite/tests/parser/should_compile/T15279.stderr - testsuite/tests/parser/should_compile/T20718.stderr - testsuite/tests/parser/should_compile/T20846.stderr - + testsuite/tests/perf/compiler/T25763.stderr - testsuite/tests/perf/compiler/all.T - + testsuite/tests/primops/should_run/T27299.hs - + testsuite/tests/primops/should_run/T27299.stdout - testsuite/tests/primops/should_run/all.T - testsuite/tests/printer/Test20297.stdout - testsuite/tests/printer/Test24533.stdout - + testsuite/tests/rts/T27618.hs - + testsuite/tests/rts/T27618.stdout - + testsuite/tests/rts/T27649.hs - + testsuite/tests/rts/T27649.stdout - testsuite/tests/rts/all.T - + testsuite/tests/rts/continuations/T27651.hs - + testsuite/tests/rts/continuations/T27651.stdout - testsuite/tests/rts/continuations/all.T - testsuite/tests/simplCore/should_compile/Makefile - + testsuite/tests/simplCore/should_compile/T27629.hs - + testsuite/tests/simplCore/should_compile/T27629.stderr - + testsuite/tests/simplCore/should_compile/T27629Plugin.hs - testsuite/tests/simplCore/should_compile/all.T - + testsuite/tests/warnings/should_fail/WExpectedNoArgError.stderr - testsuite/tests/warnings/should_fail/all.T - utils/check-exact/ExactPrint.hs - utils/check-exact/Main.hs - utils/check-exact/Transform.hs - utils/haddock/haddock-api/src/Haddock/Convert.hs - utils/jsffi/dyld.mjs The diff was not included because it is too large. View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/b2dba136e0f750545c0908b99a9a39a... -- View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/b2dba136e0f750545c0908b99a9a39a... You're receiving this email because of your account on gitlab.haskell.org. Manage all notifications: https://gitlab.haskell.org/-/profile/notifications | Help: https://gitlab.haskell.org/help