[Git][ghc/ghc][wip/dcoutts/issue-26717] 198 commits: Use attribute((dllimport)) for external RTS symbol declarations

1 Jul 2026

      Duncan Coutts pushed to branch wip/dcoutts/issue-26717 at Glasgow Haskell Compiler / GHC

Commits:
9a9ae4df by Duncan Coutts at 2026-05-05T14:44:37-04:00
Use __attribute__((dllimport)) for external RTS symbol declarations

This is needed to be hygenic about DLL symbol imports and exports.
The attribute is ignored on platforms other than Windows.

Use of the attribute however means that external data symbols do not
have a compile-time constant address (they are loaded using an
indirection). This means we have to adjust the rtsSyms initial linker
table so that it is a local constant in a function, rather than a global
constant. We now define it within a function that pre-populates the
symbol table with the RTS symbols.

- - - - -
2ad3e01e by Duncan Coutts at 2026-05-05T14:44:37-04:00
Fix the rts linker declarations for a few data symbols

and ensure that the (windows only) rts_IOManagerIsWin32Native data
symbol is marked as externally visible.

- - - - -
8ff4fdb5 by David Eichmann at 2026-05-05T14:44:37-04:00
Hadrian: Disable runtime pseudo relocations for RTS on windows hosts

- - - - -
96974723 by Teo Camarasu at 2026-05-05T14:45:20-04:00
ghci/TH: refactor to use IORef QState

This is a pure refactor and shouldn't modify semantics at all

- - - - -
eff6bfaf by Teo Camarasu at 2026-05-05T14:45:20-04:00
iserv: recover/getQ/putQ should behave same as internal interpreter

The internal and external interpreter should behave the same when
handling `recover`, the exeception recovery method of Q.
In practice, they diverge. In case of failure, the internal interpreter
only restores error message state to before the computation, wheras the
external interperter restores error message state *and* the state of putQ/getQ.

As far as I can tell this is a simple mistake in the implementation.
Note [TH recover with -fexternal-interpreter] describes the correct
behaviour but the implementation doesn't mirror this.

This change restores the correct behaviour by keeping the effects of
putQ in the erroring computation.

This is a breaking change since it modifies the behaviour of programs
that rely on recover ignoring putQ from failling computations when used
with the external interpreter. Although I highly doubt anyone relies on
this behaviour.

This divergence was first introduced in d00c308633fe7d216d31a1087e00e63532d87d6d.
As far as I can tell this was unintentional and tha commit was trying to solve a different bug.

Resolves #27022

- - - - -
1cb1d672 by Wen Kokke at 2026-05-06T09:53:40-04:00
rts: Add dynamic trace flags API

This commit adds an API to the RTS (exposed via Rts.h) that allows users to dynamically change the trace flags.
Prior to this commit, users were able to stop and start the profiling and heap profiling timers (via startProfTimer/stopProfTimer and startHeapProfTimer/stopHeapProfTimer).
This extends that functionality to also cover the core event types.

The getTraceFlag/setTraceFlag functions read and write the values of the trace flag cache, which is allocated by Trace.c, rather than modifying the members of RtsFlags.TraceFlags.
This is done under the assumption that the members of RtsFlags should not be modified after RTS initialisation.
Consequently, if the user modifies the trace flags using setTraceFlag, the object returned by getTraceFlags (from base) will not reflect these changes.

The trace flags are not protected by locks of any sort.
Hence, these functions are not thread-safe.
However, the trace flags are not modified by the RTS after initialisation, only read, so the race conditions introduced by one user modifying them are most likely benign.

This PR also puts the trace flag cache in a single global struct, as opposed to a collection of global variables, and changes the types of the individual flags from uint8_t to bool, as these have the same size on both Clang and GCC and are a better semantic match.
Prior to the change to uint8_t, they had type int, see 42c47cd6.
Even with its deprecation in C23, I don't think there should be any issue depending on stdbool.h.
The TRACE_X macros are redefined to access the global struct, with values cast to const bool to ensure they are read-only.

- - - - -
9d54dc94 by Wen Kokke at 2026-05-06T09:53:40-04:00
rts: Ensure TRACE_X values are used in place of RtsFlags.TraceFlags.X

- - - - -
418d737b by Wen Kokke at 2026-05-06T09:53:40-04:00
rts: Fix nonmoving-GC tracing

The current nonmoving-GC tracing functions were written in a different
style from the other tracing functions. They were directly implemented
as, e.g., a traceConcMarkEnd function that called postConcMarkEnd.
The other tracing functions are implemented as, e.g., traceThreadLabel_,
a function that posts the thread label event, and traceThreadLabel, a
macro that checks whether TRACE_scheduler is set. This commit fixes that
implementation, and ensures that the nonmoving-GC tracing functions only
emit events if nonmoving-GC tracing is enabled.

- - - - -
99f4afa4 by Wen Kokke at 2026-05-06T09:53:40-04:00
rts: Add SymI_HasProto for get/setTraceFlag

- - - - -
7e9eb8b9 by Wen Kokke at 2026-05-06T09:53:40-04:00
rts: Add SymI_HasProto for start/endEventLogging

- - - - -
3a3045fb by Wen Kokke at 2026-05-06T09:53:41-04:00
rts: Add changelog entry

- - - - -
a3b339a4 by Teo Camarasu at 2026-05-06T09:54:25-04:00
interface-stability/base: don't distinguish ws-32

The interface of base is identical when the Word size is 32bits.
Therefore, there is no need to have another file for this case.
So, we delete it.

Step towards: #26752

- - - - -
eb922183 by Duncan Coutts at 2026-05-07T14:28:50+01:00
Add a rts posix FdWakup utility module

This will be used to implement wakeupIOManager for in-RTS I/O managers.

It provides a notification/wakeup mechanism using FDs, suitable for
situations when a thread is blocked on a set of fds anyway. It uses the
classic self-pipe trick, or equivalently eventfd on supported platforms.

This will initially be used to implement prompt interrupt or shutdown of
the posix ticker thread.

- - - - -
01b0e233 by Duncan Coutts at 2026-05-07T14:28:50+01:00
Add prompt shutdown to the pthread ticker implementation.

The Linux timerfd ticker monitors a pipe which is used by exitTicker to
ensure a prompt wakeup and shutdown. The pthread ticker lacked this and
so would only exit at the next ticker wakeup (10ms by default).

This patch adds the same mechanism to the pthread ticker.

This changes the pthread ticker from waiting by using nanosleep() to
waiting using either ppoll() or select(), so that it can wait on both
a time and a file descriptor. On Linux at least, a test program to
compare the timing jitter of these APIs shows that using nanpsleep,
ppoll or select makes no statistical difference to the maximum or
average jitter.

This is a step towards unifying the posix ticker implementations, so
that we can have just one portable one (albeit with some limited cpp).
It is also a step towards using the ticker as part of a more general
implementation of wakeUpRts, since this will require a method to wake
the rts from a signal handler context (ctl-c handler).

- - - - -
bc41d646 by Duncan Coutts at 2026-05-07T14:28:50+01:00
Update ticker header commentary

It was antique and didn't apply even to the previous implementation, and
certainly not to the updated one.

- - - - -
4ed9a386 by Duncan Coutts at 2026-05-07T14:28:50+01:00
Remove the timerfd-based ticker implementation

There does not appear to be any remaining advantage on Linux to using
the timerfd ticker implementation over the portable one (using ppoll on
Linux for precise timing).

The eventfd implementation was originally added at a time when Linux was
still using a signal based implementation. So it made sense at the time.
See (closed) issue #10840.

- - - - -
97504fa6 by Duncan Coutts at 2026-05-07T14:28:50+01:00
Consolidate to a single posix ticker implementation

Previously we had four implementations, two using signals and two using
threads. Having just one should make behaviour more consistent between
platforms, and should make maintenance easier.

- - - - -
1e60023b by Facundo Domínguez at 2026-05-07T18:01:16-04:00
Generalize so_inline to specify which bindings should be preserved

This commit generalizes the so_inline option of the simple optimizer
so we can indicate with a predicate the specific bindings that should
be kept.

This feature is important for the LiquidHaskell plugin, which relies on the
simple optimizer to make core programs easier to read, but needs to preserve
bindings that are relevant for verification.

See https://gitlab.haskell.org/ghc/ghc/-/issues/24386 for the full discussion.

- - - - -
44cf9cd7 by Wolfgang Jeltsch at 2026-05-12T09:48:18-04:00
Move the `Text.Read` implementation into `base`

- - - - -
4ac3f7d6 by Vladislav Zavialov at 2026-05-12T09:49:03-04:00
EPA: Use AnnParen for tuples and sums

Summary of changes

* Do not use AnnParen in XListTy, replace it with EpToken "[" and "]"
* Specialise AnnParen to tuple/sums by dropping the AnnParensSquare
  and keeping only AnnParens and AnnParensHash
* Use AnnParen in XExplicitTuple
* Use AnnParen in XExplicitTupleTy
* Use AnnParen in XTuplePat
* Use AnnParen in XExplicitSum (via AnnExplicitSum)
* Use AnnParen in XSumPat (via EpAnnSumPat)

This is a refactoring with no user-facing changes.

- - - - -
1bdcddec by Duncan Coutts at 2026-05-12T09:49:48-04:00
Add minimal dlltool support to ghc-toolchain

The dlltool is a tool that can create dll import libraries from .def
files. These .def files list the exported symbols of dlls. Its somewhat
like gnu linker scripts, but more limited.

We will need dlltool to build the rts and ghc-internal libraries as DLLs
on Windows. The rts and ghc-internal libraries have a recursive
dependency on each other. Import libraries can be used to resolve
recursive dependencies between dlls. We will use an import library for
the rts when linking the ghc-internal library.

- - - - -
f7fc3770 by Duncan Coutts at 2026-05-12T09:49:48-04:00
Add minimal dlltool support into ./configure

Find dlltool, and hopefully support finding it within the bundled llvm
toolchain on windows.

- - - - -
e4e22bfb by Duncan Coutts at 2026-05-12T09:49:48-04:00
Update the default host and target files for dlltool support

- - - - -
5666c8f9 by Duncan Coutts at 2026-05-12T09:49:48-04:00
Add dlltool as a hadrian builder

Optional except on windows.

- - - - -
5e14fe3f by Duncan Coutts at 2026-05-12T09:49:48-04:00
Update and generate libHSghc-internal.def from .def.in file

The only symbol that the rts imports from the ghc-internal package now
is init_ghc_hs_iface. So the rts only needs an import lib that defines
that one symbol.

Also, remove the libHSghc-prim.def because it is redundant. The rts no
longer imports anything from ghc-prim.

Keep libHSffi.def for now. We may yet need it once it is clear how
libffi is going to be built/used for ghc.

- - - - -
3d91e4a6 by Duncan Coutts at 2026-05-12T09:49:48-04:00
Add rule to build libHSghc-internal.dll.a and link into the rts

On windows only, with dynamic linking.

This is needed because on windows, all symbols in dlls must be resolved.
No dangling symbols allowed. References to external symbols must be
explicit. We resolve this with an import library. We create an import
library for ghc-internal, a .dll.a file. This is a static archive
containing .o files that define the symbols we need, and crucially have
".idata" sections that specifies the symbols the dll imports and from
where.

Note that we do not install this libHSghc-internal.dll.a, and it does
not need to list all the symbols exported by that package. We create a
special purpose import lib and only use it when linking the rts dll, so
it only has to list the symbols that the rts uses from ghc-internal
(which is exactly one symbol: init_ghc_hs_iface).

- - - - -
c8dae539 by Alice Rixte at 2026-05-12T09:50:52-04:00
Script for downloading and copying `base-exports` file

- - - - -
5fab2238 by Wolfgang Jeltsch at 2026-05-12T21:24:27+03:00
Introduce a cache of home module name providers

This contribution introduces to the module graph a cache that maps home
module names to sets of units providing them and changes the finder to
use that cache. This is a performance optimization, especially for
multi-home-unit builds.

The particular changes are as follows:

  * In `GHC.Unit.Module.Graph`, `ModuleGraph` is extended with a new
    field `mg_home_module_name_providers_map`, exposed as
    `mgHomeModuleNameProvidersMap`. This is a cache that assigns to each
    home module name the set of IDs of home units that define it.
    Operations that construct module graphs are updated such that this
    cache stays synchronized.

  * In `GHC.Unit.Finder`, `findImportedModule` is changed to pull
    `mgHomeModuleNameProvidersMap` from `hsc_mod_graph` and pass it to
    `findImportedModuleNoHsc`, which now does not search home units in
    arbitrary order but prioritizes those units that the cache mentions
    as potential providers of the requested module.

In addition, this contribution adds variants of the two multi-component
compiler performance tests that use 100 units instead of 20, because
with just 20 units the benefits from caching of home module name
providers are still negligible.

The following table shows the total time needed for running both
multi-component tests before and after this contribution and with
different numbers of units:

| # of units | Before | After |
|-----------:|-------:|------:|
|         20 |   0:12 |  0:12 |
|        100 |   0:47 |  0:42 |
|        200 |   3:05 |  2:08 |

Note that there seems to be a general overhead of 12 seconds that is not
attributable to the actual tests, so that the real running times should
be 12 seconds smaller than shown above.

Resolves #27055.

Metric Decrease:
    MultiComponentModules
    MultiComponentModulesRecomp

Co-authored-by: Matthew Pickering <matthewtpickering@gmail.com>
Co-authored-by: Fendor <fendor@posteo.de>

- - - - -
38b76b2f by Cheng Shao at 2026-05-13T17:48:48-04:00
testsuite: mark T22159 as fragile

This patch marks T22159 as fragile on Windows for issue described in #27248.
Before we get to the bottom of those failures, this unblocks newer
Windows runners.

- - - - -
50188615 by Ian Duncan at 2026-05-14T13:45:07+02:00
AArch64: use ASR not LSR for MO_U_Shr at W8/W16

The unsigned right shift (MO_U_Shr) for sub-word widths (W8, W16)
with a variable shift amount was emitting ASR (arithmetic/signed shift
right) after zero-extending with UXTB/UXTH. This should be LSR
(logical/unsigned shift right). After zero-extension the upper bits
happen to be 0 so ASR produces the same result, but it is semantically
wrong and would break if the zero-extension were ever optimized away.
Includes assembly output test (grep for lsr) and runtime test
verifying unsigned right shift of Word8 and Word16 values.

- - - - -
28666fbf by Vladislav Zavialov at 2026-05-19T12:44:05-04:00
Add type families: Tuple, Constraints, Tuple#, Sum# (#27179)

These type families map tuples of types to the corresponding Tuple<N>,
Tuple<N>#, CTuple<N>, and Sum<N># types. Some examples at N=2:

	Tuple (Int, Bool)          = Tuple2 Int Bool
	Constraints (Show a, Eq a) = CTuple2 (Show a) (Eq a)
	Tuple# (Int#, Float#)      = Tuple2# Int# Float#
	Sum# (Int#, Float#)        = Sum2# Int# Float#

See GHC Proposal #145 "Non-punning list and tuple syntax".

To make the Sum# instance at N=64 possible, this patch also introduces
the Sum64# constructor declaration and bumps mAX_SUM_SIZE from 63 to 64.

Metric Increase:
    ghc_experimental_dir

- - - - -
41c2448b by Wen Kokke at 2026-05-19T12:44:53-04:00
rts: Add IPE event class for -l

This commit adds a new IPE event class to the -l RTS flag.
Previously, IPE events were enabled unconditionally.
However, the IPE events can easily grow to hundreds or thousands of megabytes.
With the new event class you can pass, e.g., -l-I to disable IPE events.

- - - - -
62536551 by Wen Kokke at 2026-05-19T12:44:53-04:00
ghc-internal: Add TraceFlags.traceIPE

- - - - -
e45312d1 by Wen Kokke at 2026-05-19T12:44:53-04:00
testsuite: Add test for TraceFlags.traceIpe

- - - - -
4768d9aa by Wen Kokke at 2026-05-19T12:44:53-04:00
ghc-internal: Add DebugFlags.ipe

- - - - -
bc1b5c69 by Wen Kokke at 2026-05-19T12:44:53-04:00
testsuite: Add test for DebugFlags.ipe

- - - - -
0da1543f by Duncan Coutts at 2026-05-19T12:45:37-04:00
Document removal of the signal-based interval timer

Update mentions within the RTS section of the users guide.

Add a changelog entry.

- - - - -
b2911514 by Duncan Coutts at 2026-05-19T12:45:37-04:00
Fix section for an recent changelog entry

- - - - -
d6d76a7a by David Eichmann at 2026-05-19T12:46:19-04:00
ghc-toolchain: implement llvm program versioning logic

- - - - -
2dd36fa3 by Wolfgang Jeltsch at 2026-05-20T04:49:52-04:00
Turn `Trustworthy` into `Safe` in `base` where possible

- - - - -
f4399dd1 by Wolfgang Jeltsch at 2026-05-20T04:50:37-04:00
Make the current `base` buildable with GHC 10.0

- - - - -
1a7de232 by Duncan Coutts at 2026-05-20T12:26:25-04:00
Hadrian: remove legacy rts .so symlinks

For compatibility with the old makefile based build system, hadrian had
rules to generate symlinks from unversioned to versioned names for the
rts .so/.dynlib file, like libHSrts-ghcx.y.so -> libHSrts-1.0.3-ghcx.y.so

We no longer need these symlinks since the makefile build system has
been retired some time ago. The need for these symlinks is awkward on
windows where we cannot (in practice) create symlinks. So rather than
make them conditional (non-windows), just remove them entirely.

- - - - -
286f1adf by fendor at 2026-05-20T12:27:09-04:00
Fix regression T27202: `:load` and `:add` work in GHCi

To fix the regression there are conceptually two major things that we
fix:

* We don't remove the `importDirs` from `interactive-session`
* When `:add`ing a module, we don't try to find them via PackageImports
    * The PackageImport is wrong as we can't know the package-name at
      this stage in ghc/UI.hs

What does it mean to not remove the `importDirs` from
`interactive-session`?
It means that, given some initial `DynFlags`, we will use those
`importDirs` in `interactive-session`.

The initial `DynFlags`, however, depend on how you initialise the GHC
session.
For a simple session, initialised by

    ghc -isrc -this-unit-id main

It is simple, just use the `DynFlags` given on the cli.
Thus, `main` and `interactive-session` will have the same `DynFlags`,
except for the `homeUnitId` and `interactive-session` depends on `main`
by construction of the GHCi session.

What about a multiple home unit session, though?

    ghc -unit @unit1 -unit @unit2

What are the `DynFlags` in this cli invocation? It shouldn't be either
`@unti1` nor `@unit2`, as the order shouldn't matter or any other
implicit condition.

For consistency, we decide that the initial `DynFlags` are the top
`DynFlags` on the cli, ignoring `-unit` flags.
Thus, in this example, there are no `importsDirs` regardless of what we
might find in `@unit1` and `@unit2`.

But in this invocation:

    ghc -isrc -unit @unit1 -unit @unit2

The `interactive-session` will have the `importsDirs` `src`.
Note, `-isrc` will be inherited in `@unit1` and `@unit2`, so you need to
explicitly use `-i` to clear the `importsDirs`, in order to avoid
accidentally adding `src` as an import directory to all other home
units.

This fix has been made possible by the improvements introduced in
!15888, which avoids ambiguity when a home unit shares the `importsDirs`
with the `interactive-session`, on top of being much faster for multiple
home units.

Adds regression tests for T27202 for `:load`ing and `:add`ing modules
that are located in import directories.

- - - - -
728662de by fendor at 2026-05-20T12:27:09-04:00
Use home unit package db stacks in GHCi prompt and session unit

In order to import modules from home unit dependencies (e.g., `Data.Map`),
the ghci prompt unit needs to populate its `UnitState`.
This is tricky to handle correctly, which `PackageDBFlag`s should we use
to populate the `UnitState`?
We decide, the most intuitive solution for users is to depend on all
`PackageDBFlag`s, so that any dependency can be imported in GHCi.
This assumes consistency in the `PackageDBFlag`s, so no two home units
specify `PackageDBFlag`s that are inconsistent with each other.

We could simply concat all the `PackageDBFlag`s of the existing home
units, but later `PackageDBFlag`s shadow earlier ones, leading to the
last processed home units' `PackageDBFlag`s to shadow the earlier ones.
This is hard to fix, we need to give users the capability to provide ghc
options for the ghci prompt home unit.
However, as this is considerably more work, we decided on an
approximation that should work out most of the time.

Package Db stacks in cabal and stack follow a certain structure:

    -no-user-package-db > -package-db $cabal-store > -package-db $local-db

The first two arguments are always the same, namely the
`-no-user-package-db` and `-package-db`.
We compute the longest common prefix over all home units, and use that
as the start of the package db stack. Then, over the rest of the
`PackageDBFlag`s, we simply take the union and append them to our
initial stack.
We assume, that the rest of package dbs only defines very few, "local"
units that are usually not shadowing each other.

This allows us to get a relatively consistent package database stack for
the ghci prompt home unit.

Similar reasoning applies to the session unit in order to add modules to
the session and have dependencies available in the module.

We do something similar for `-package` flags, to make sure only the
correct units are actually visible in the ghci session.
This time, we simply take the union of all `PackageFlag`s, allowing us
to import modules from the home unit dependencies.

In the future, it would be beneficial to allow the user to provide the
exact ghc options to control the visibilities. For now, this will have
to do.

- - - - -
740d89a0 by Simon Peyton Jones at 2026-05-20T17:20:44-04:00
Do not use mkCast during typechecking

This commit fixes #27219.  The problem was that the typechecker was using
`mkCast`, whose assertion checks legitimately fail when applied to types
that contain unification variables.

- - - - -
a50fdb06 by Simon Peyton Jones at 2026-05-20T17:20:45-04:00
Major refactor of the Simplifier

The main payload of this patch is to refactor the Simplifer to avoid
repeated simplification when using Plan (AFTER) for rule rewrites.
The need for this was shown up by #26989.

See Note [Avoid repeated simplification] in GHC.Core.Opt.Simplify.Iteration.

Related refactoring:

* Refactor the two fields `sc_dup` and `sc_env` in `ApplyToVal` into one, `sc_env`.
  Reason: the envt is irrelevant in the "simplified" case, so the data type describes
  the possiblitiies much more accurately now.

* Some refactoring in `knownCon` to split off `wrapDataConFloats`.

* Refactor `lookupRule` and its auxiliary functions to return `RuleMatch`,
  a new data type. See Note [data RuleMatch] in GHC.Core. Ditto for BuiltinRule.

  This RuleMatch returns fragments of the target in rm_args and rm_floats,
  leaving `rm_rhs` to be the stuff from the RULE itself.

  Doing this has routine consequences in GHC.Core.Opt.ConstantFold. Many changes
  there but all routine.

* When doing occurrence analysis on RULEs, make the occ-info on the rule
  binders relate just to the RHS, not the LHS.  See (OUR1) in
  Note Note [OccInfo in unfoldings and rules]

  This means that Lint must not complain about the fact that the patterns
  in the RULE mentions binders that are marked dead.
  See Note [Dead occurrences] in GHC.Core.Lint.

  I changed the Core pretty-printer so that it didn't suppress dead binders,
  else I can't see those binders in RULEs.  That led to quite a lot of testsuite wibbles.

* Refactor FloatBinds, so that it is used both by
  `exprIsConApp_mabye` and by `lookupRule`
  * Move the definition of FloatBinds out of GHc.Core.Make, into GHC.Core.
  * Add FloatTick as an extra constructor.
  * Refactor `lookupRule` to use `FloatBinds` instead of `BindWrapper`.
  This refactor just shares more code.

  (Rename GHC.Core.Opt.FloatOut.FloatBinds to FloatLets, to avoid gratuitious
  name clash with GHC.Core.FloatBinds.)

Corecion optimisation

* In simpleOpt, when composing coercions, call new function `optTransCo`.
  This is much lighter weight than full blown coercion optimisation.

* Make `GHC.Core.Opt.Arity.pushCoValArg` and `pushCoTyArg` return the
  coercionLKind of the coercion. This saves recomputing that coercionLKind
  at the key call sites in GHC.Core.Opt.Simplify.Iteration.pushCast.

* Rename `addCoerce` in GHC.Core.Simplify.Iteration to become `pushCast`.

* In the `ApplyToVal` case of `pushCast` we had a very unsavoury call to `simplArg`.
  I eliminated it by adding a field `sc_cast` to `ApplyToVal` that records any
  pending casts.  Much nicer now.  See Note [The sc_cast field of ApplyToVal].

* Don't optimise coercions if the type-substitution is empty.
  See Note [Optimising coercions] in GHC.Core.Opt.Simplify.Iteration.

The fix for #26838 is dramatic.  For the test in perf/compiler/T26839 we have

   Compiler allocs:  Before: 7,363M
                     After:    688M

Compile time goes down generally.  Here are compiler-alloc changes
over 0.5%:
           CoOpt_Read(normal)    729,184,920   -0.7%
     CoOpt_Singletons(normal)    666,916,960   -4.6% GOOD
          LargeRecord(normal)  1,227,056,876   +1.1%
               T12227(normal)    256,827,604   -4.6% GOOD
               T12425(optasm)     76,879,410   -0.8%
               T12545(normal)    787,826,918  -10.8% GOOD
               T12707(normal)    775,186,464   -0.9%
               T13253(normal)    318,599,596   -0.8%
               T14766(normal)    685,857,320   -1.0%
               T15304(normal)  1,123,333,422   -2.2%
               T15630(normal)    123,142,330   -2.6%
              T15630a(normal)    123,092,100   -2.6%
               T15703(normal)    299,751,682   -2.9% GOOD
               T17516(normal)    964,072,280   +1.0%
               T18223(normal)    367,016,820   -6.2% GOOD
               T18730(optasm)    130,643,770   -3.3% GOOD
               T20261(normal)    535,608,584   -0.7%
              T21839c(normal)    340,340,436   -0.9%
               T24984(normal)     85,568,392   -1.9%
                T3064(normal)    174,631,992   -1.2%
                T3294(normal)  1,215,886,432   -0.7%
                T5030(normal)    141,449,704  -17.2% GOOD
             T5321Fun(normal)    258,484,744   -1.9%
                T8095(normal)    770,532,232   -2.7%
                T9630(normal)    858,423,408  -14.5% GOOD
               T9872c(normal)  1,591,709,448   +0.7%
  info_table_map_perf(normal) 19,700,614,458   -1.3%

                    geo. mean                  -0.7%
                    minimum                   -17.2%
                    maximum                    +1.1%

However, strangely there seems to be a 5.0% increase in CoOpt_Read in
the x86_64-linux-fedora43-validate+debug_info+ubsan job, although
there generally a /decrease/ in this test in other builds.  The baseline
value looks strange.  Anyway I'll just accept it.

Metric Decrease:
    CoOpt_Singletons
    T12227
    T12545
    T12707
    T15703
    T18223
    T18730
    T21839c
    T5030
    T9630

Metric Increase:
    CoOpt_Read

- - - - -
834623d4 by Mrjtjmn at 2026-05-20T17:21:41-04:00
users-guide: Fix weird notation in "Summary of stolen syntax"

- - - - -
6f9d7c71 by Markus Läll at 2026-05-21T15:25:34-04:00
Use "grimily" instead of "grimly"

Fixes https://gitlab.haskell.org/ghc/ghc/-/issues/27221

- - - - -
50e999ca by fendor at 2026-05-21T15:26:18-04:00
Speed up 'closure' computation in `ghc-pkg`

Cache the set of already seen `UnitId`s and use `Set` operations to
speed up 'closure' computation.

Further simplify the implementation of 'closure' to account for the
actual usage.
As a consequence, we rename 'closure' to 'brokenPackages' to reflect its
purpose better after the simplification.

- - - - -
7ecc6184 by sheaf at 2026-05-21T15:27:10-04:00
TcMPluginHandling: be more lenient when no plugins

This change ensures that, if a function such as 'typecheckModule' was
invoked with 'NoTcMPlugins', GHC doesn't spuriously complain about TcM
plugins having already been stopped, as there were none to start with.

- - - - -
72c8de5c by Simon Jakobi at 2026-05-23T18:41:42-04:00
Implement List.elem via foldr

...in order to allow specialization to Eq instances.

The implementation of notElem is updated for consistency.`

Corresponding CLC proposal:
https://github.com/haskell/core-libraries-committee/issues/412

Addresses #27096.

- - - - -
3268c610 by Alan Zimmerman at 2026-05-23T18:42:30-04:00
EPA: Fix span for qualified multiline string

Fix the span for a qualified multiline string like

  Text."""
    I'm a multiline
    Text value
    !
  """

to extend to the end of the entire string, not just the first line.

Closes #27274

- - - - -
1f096790 by Alan Zimmerman at 2026-05-23T18:43:20-04:00
EPA: Fix exact printing namespace-specified wildcards

Ensures correct printing of imports of the form

   import Data.Bool (data True(data ..))
   import Data.Bool (data True(type ..))

Closes #27291

- - - - -
56ada7c0 by Mrjtjmn at 2026-05-23T18:44:19-04:00
Fix ambiguous syntax of BangPatterns in users guide

Update documentation for the BangPatterns extension to specify
how surrounding whitespace affects interpretation of `!`.

* Only when there is whitespace before `!` and no whitespace after,
  it is recognized as a BangPattern.
* Other cases `⟨varid⟩!⟨varid⟩`, `⟨varid⟩ ! ⟨varid⟩`, `⟨varid⟩! ⟨varid⟩`
  are treated as infix operators.

- - - - -
579aa0b7 by Simon Jakobi at 2026-05-25T16:31:26-04:00
Ensure that SetOps.{minusList,unionListsOrd} can be specialized

...by marking them INLINABLE. Haddock allocates 0.1–0.3% less as a
result.

This also removes some redundant constraints on unionListsOrd.

- - - - -
cccf45da by Cheng Shao at 2026-05-25T16:32:13-04:00
wasm: ensure post-linker output is synchronous ESM

This patch fixes wasm backend's post-linker output script to ensure
it's synchronous ESM and doesn't use top-level await, which doesn't
work in ServiceWorkers. Fixes #27257.

- - - - -
8db331a3 by Zubin Duggal at 2026-05-26T04:54:03-04:00
Update to semaphore-compat 2.0.0 using v2 of the protocol

On Linux and other POSIX platforms, GHC's -jsem jobserver client now
speaks v2 of the semaphore-compat protocol, which uses Unix domain
sockets in place of POSIX named semaphores. This avoids the libc-ABI
issues that affected the old implementation. Windows is unaffected
and continues to use the v1 protocol (Win32 named semaphores); its
reported protocol version remains v1.

When GHC receives a -jsem name whose protocol version it does not
support, it emits a -Wsemaphore-version-mismatch warning and falls
back to -j<N> rather than crashing. ghc --info exposes the supported
version in a new "Semaphore version" entry so cabal-install can detect
a mismatch before invoking GHC.

Users on a cabal-install that predates the v2 update will continue to
build successfully on Linux/POSIX, but will lose the cross-process
-jsem coordination and fall back to -j<N> per GHC invocation. Users
must upgrade to a cabal-install that supports protocol v2 to recover
full parallelism.

Also fix a leak in cleanupSem (#27253): cleanupSem used to snapshot
heldTokens and release them before killing the loop, while the loop's
in-flight acquire/release children could still be mutating it.
Cleanup now runs inside the loop's own exit handler, after draining
the active child via a new activeChild TVar, so the snapshot has no
concurrent mutator.

See also:
  - GHC proposal amendment:  https://github.com/ghc-proposals/ghc-proposals/pull/673
  - cabal-install patch:     https://github.com/haskell/cabal/pull/11628
  - semaphore-compat MR:     https://gitlab.haskell.org/ghc/semaphore-compat/-/merge_requests/8

Bump semaphore-compat submodule to 2.0.0

Fixes #25087 and #27253

- - - - -
17be4f1f by Alan Zimmerman at 2026-05-26T04:54:52-04:00
EPA: Record semicolons in HsModifier

Ensure the semi colons are captured in the ParsedSource for code like

  %True;; %False;
  instance C D

It makes HsModifier (and hence HsModifierOf) LocatedA, so the semi
colons can be recorded as [TrailingAnn]

Also rename pprHsModifiers to pprLHsModifiers to match.

Closes #27294

- - - - -
8f991755 by fendor at 2026-05-26T11:02:52-04:00
Revert prog003 acceptance

We thought the commit 286f1adff3e78d775ff325caff71d0cee25d710b fixed the
test, but due to changes to ghci, modules loaded during the GHCi
session, the test was actually no longer testing what it set out to do,
"fixing" the broken test.

As modules are added to the `interactive-session` home unit, the object code needs
to be compiled with `-this-unit-id interactive-session`, otherwise the
object code won't be used.
Once this has been fixed in the test, the test fails as expected again.

- - - - -
277a3687 by mangoiv at 2026-05-26T11:03:40-04:00
libraries/process: bump submodule to v1.6.29.0

This submodule bump resolves a segfault on macos 15.
Fixes #27144

- - - - -
6779bb0c by mangoiv at 2026-05-26T11:03:40-04:00
libraries/unix: in submodule, don't pick branch 2.7

The 2.7 branch is outdated and the module has been advanced far beyond
it anyway, so remove that line.

- - - - -
4a645683 by Simon Peyton Jones at 2026-05-27T21:41:59-04:00
Trim the continuation in mkDupableContWithDmds

When there are no remaining argument demands, it means the application
is bottoming. In this case, we can trim the continuation to avoid the
panic that was observed in #27261.

See Note [Trimming the continuation for bottoming functions] in
GHC.Core.Opt.Simplify.Iteration.

- - - - -
8ab506ff by Cheng Shao at 2026-05-27T21:42:47-04:00
ghci: fix module name string lifetime in hs_hpc_module invocation

This patch makes hpcAddModule pass a properly malloced module name
string to hs_hpc_module, instead of using useAsCString which causes
use-after-free of module name string. Fixes #27297.

Co-authored-by: Codex <codex@openai.com>

- - - - -
b0233814 by sheaf at 2026-05-27T21:43:31-04:00
Relax acceptance threshold for T10421

As seen in #27289, the 1% acceptance threshold for this text was
overly narrow, resulting in spurious test failures. This commit widens
the acceptance threshold to 2%. Fixes #27289.
- - - - -
63ce5770 by Luite Stegeman at 2026-05-28T12:23:35-04:00
Fixes for black holes

 - suspend duplicate work for eager black holes
 - detect eager black holes in checkBlockingQueues
 - don't overwrite existing black holes even if they're not
     in an eager blackhole frame
 - don't deadlock on self when thunk is already blackholed

Fixes #26936

- - - - -
037a80dc by Tom McLaughlin at 2026-05-28T12:24:36-04:00
Event/Windows.hsc: rethrow exceptions in overlapped IO

This prevents the WinIO manager from swallowing exceptions in overlapped IO. It
was added to make WinIO support possible in the `network` library. See
https://gitlab.haskell.org/ghc/ghc/-/issues/27283.

We also bump __IO_MANAGER_WINIO__ to 2 so libraries can gate on this using CPP.

- - - - -
2d53bcdb by Wolfgang Jeltsch at 2026-05-28T12:25:21-04:00
Allow `downsweep` to use nodes of an existing module graph

To this end, `downsweep` has not been able to use the nodes of a module
graph obtained from a previous downsweeping round. In some GHC API
applications, downsweeping is performed somewhat incrementally and
therefore could profit from reusing such existing results. This
contribution makes this possible.

Resolves #27054.

Co-authored-by: Matthew Pickering <matthewtpickering@gmail.com>

- - - - -
f4fbb583 by Simon Jakobi at 2026-05-28T12:26:04-04:00
Add regression test for T11226

Closes #11226.

- - - - -
ed29a5e6 by Sven Tennie at 2026-05-28T17:30:36-04:00
Add optional config setting for LibDir (#19174)

Previously, the `libDir` was derived from `topDir`. This won't work for
inplace stage2 cross-compilers where binaries and libraries are in
different stage dirs (`_build/stage1/` for executables and
`_build/stage2` for libraries).

`LibDir` is set in the inplace `settings` files. For bindists, we
generate a new `settings` file with no `LibDir` entry. GHC then defaults
to use `topDir` as `libDir` again. This keeps the bindist relocatable.

If `LibDir` is a relative path, it is interpreted relatively to
`topDir`.

The global package db is part of the `lib/` folder. If we want to point
for inplace cross-compilers to the succeeding stage's folder, this is
done by setting `LibDir`. Thus, the global package db must be found
relative to `libDir`` (which may default to `topDir` or be set by
`LibDir`).

The complexity of settings becomes scary. So, add a test to ensure
`LibDir` works as expected.

- - - - -
8339cf8f by Sven Tennie at 2026-05-28T17:30:36-04:00
Add Haddock to FileSettings

Helping to understand the fields' meanings without deeper analyses.

- - - - -
4ce251e4 by Sylvain Henry at 2026-05-28T17:31:39-04:00
foundation test: skip signed minBound `quot` (-1) (#27222)

`minBound `quot` (-1)` for fixed-width signed integers is platform
dependent: the mathematical result -minBound is not representable in
the type. On x86, IDIV traps; LLVM's sdiv is undefined behaviour in
this case; on AArch64/RISC-V, SDIV wraps to minBound.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

- - - - -
b8ba7e61 by Simon Jakobi at 2026-05-28T17:32:23-04:00
Prevent dictionary-passing in checkTyEqRhs

...by pre-specializing it to TcM.

Previously, wherever checkTyEqRhs was used in other modules, the
Core showed dictionary passing ($fMonadIOEnv). The added SPECIALIZE
pragma prevents this.

- - - - -
d603477f by David Eichmann at 2026-05-29T13:17:12-04:00
Hadrian: create a ghc-internal .def file per ghc-internal dll

The .def file generated from rts/win32/libHSghc-internal.def.in contains
the name of the ghc-internal dll. The correct dll name differs based
on if the dll is inplace/final and if using the Dynamic way. Previously,
this was not accounted for and inconsistent dlls names where used. That
led to failure when loading dlls at runtime in experiments with windows
dynamic linking.

- - - - -
1fc21753 by Sylvain Henry at 2026-05-29T13:18:14-04:00
ghc-bignum: copy backend interface haddocks to Native backend (#27305)

The haddock comments documenting the BigNat backend interface (function
contracts, expected MutableWordArray# sizes, return-value semantics, etc.)
were attached to the FFI backend module. Copy them to the Native backend
so they remain in tree once the FFI backend is removed.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

- - - - -
717059df by Sylvain Henry at 2026-05-29T13:18:14-04:00
ghc-bignum: remove FFI backend (#27305)

The FFI backend of ghc-bignum (now part of ghc-internal) had no known
users and is easy to recreate by relinking ghc-internal with a custom
backend. Remove the backend module, the bignum-ffi cabal flag, and the
ffi option from Hadrian's --bignum selector. The backend interface
documentation now lives in the Native backend module.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

- - - - -
4bb3b1d8 by Sylvain Henry at 2026-05-29T13:18:14-04:00
ghc-bignum: remove Check backend (#27305)

The Check backend of ghc-bignum (now part of ghc-internal) compared the
selected backend's output against the Native backend for validation.
It had no known users. Remove the backend module, the bignum-check
cabal flag, the bignumCheck Hadrian flavour field, and the check-
prefix in Hadrian's --bignum selector.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

- - - - -
6b3044a0 by David Eichmann at 2026-05-30T11:58:48-04:00
Add code comments to allocator code

- - - - -
f4e04210 by Matthew Pickering at 2026-05-30T11:59:34-04:00
hadrian: Refactor system-cxx-std-lib rules

I noticed a few things wrong with the hadrian rules for
`system-cxx-std-lib` rules.

* For `text` there is an ad-hoc check to depend on `system-cxx-std-lib`
outside of `configurePackage`.
* The `system-cxx-std-lib` dependency is not read from cabal files.
* Recache is not called on the packge database after the `.conf` file is
generated, a more natural place for this rule is `registerRules`.

Treating this uniformly like other packages is complicated by it not
having any source code or a cabal file. However we can do a bit better
by reporting the dependency firstly in `PackageData` and then needing
the `.conf` file in the same place as every other package in
`configurePackage`.

This commit increases the `shakeVersion`, to provide backwards
compatibility to previous builds with different PackageData.

Fixes #25303

Co-authored-by: Sven Tennie <sven.tennie@gmail.com>

- - - - -
576987d0 by Simon Jakobi at 2026-06-02T04:53:36-04:00
compiler: use nubOrd from containers

Address #27103 by replacing GHC.Utils.Misc.ordNub[On] with
Data.Containers.ListUtils.nubOrd[On].

Note that nubOrd suffers from a small inefficiency, a fix for which
will be included in the next containers release:

  https://github.com/haskell/containers/issues/1202

- - - - -
deea53c3 by David Eichmann at 2026-06-02T04:54:22-04:00
Hadrian: disable response files for GHC/Haddock builders on non-Windows

This makes debugging build errors easier on non-windows hosts.
See issue #27230

- - - - -
f2f5c6ba by Nikita Efremov at 2026-06-02T16:04:54+00:00
fix typo : compete with performance, not complete
- - - - -
5524ea0e by Wolfgang Jeltsch at 2026-06-03T08:01:26-04:00
Make the current `base` buildable with GHC 9.14

This comprises the following changes:

  * Disable some imports into `GHC.Base` for GHC 9.14
  * Disable some imports into `Prelude` for GHC 9.14
  * Disable separate `ArrowLoop` import for GHC 9.14
  * Disable `GHC.Internal.STM` import for GHC 9.14
  * Disable `GHC.Internal.Unicode.Version` import for GHC 9.14
  * Disable `GHC.Internal.TH.Monad` import for GHC 9.14
  * Add alternative `fixIO` import for GHC 9.14
  * Add alternative `unsafeCodeCoerce` import for GHC 9.14
  * Disable hiding of imported SIMD operations for GHC 9.14
  * Disable use of GHC 9.14’s `printToHandleFinalizerExceptionHandler`
  * Enable use of `getFileHash` from `ghc-internal` for GHC 9.14
  * Make `thenA` available for GHC 9.14
  * Make `thenM` available for GHC 9.14
  * Disable translation of `IoManagerFlagPoll` for GHC 9.14
  * Add `hGetNewlineMode` for GHC 9.14

- - - - -
d3438055 by Enrico Maria De Angelis at 2026-06-03T08:02:17-04:00
Fix #27067 - Clarify haddocks on `minusNaturalMaybe`

- - - - -
f9bcfac2 by sheaf at 2026-06-03T14:47:19-04:00
Avoid mkTick in Core Prep breaking ANF

As discovered in #27182, mkTick can break ANF. This patch introduces a
variant of mkTick that skips the single optimisation that could break
ANF. This is preferrable over switching to the raw Tick constructor,
as the latter may introduce spurious cost centres in profiling reports.

This is a temporary measure until we more thoroughly refactor how
mkTick works (see #27141).

See Note [mkTick breaks ANF] in GHC.CoreToStg.Prep.

Fixes #27182

- - - - -
cf1fd661 by Artem Pelenitsyn at 2026-06-03T14:48:09-04:00
clarify comment for getSizeofMutableByteArray#: we get the size in bytes, not "elements"
- - - - -
a3b431f3 by David Eichmann at 2026-06-04T10:10:19+00:00
Hadrian: convert env variable ACLOCAL_PATH to unix paths.

Convert ACLOCAL_PATH to a unix style path when invoking autoreconf.
Autoreconf doesn't handle windows paths.
See Note [Autoreconf unix paths from ACLOCAL_PATH].

Fixes #27311

- - - - -
18f6138a by Simon Jakobi at 2026-06-04T20:20:31-04:00
testsuite: Deduplicate --only test names

config.only is assumed to be a set, but supplying --only overwrote it
with the (list) argparse result, which can contain duplicates. When a
test ran, config.only.remove(name) dropped only the first occurrence,
so a duplicated name lingered and was later misreported as a
"test not found" framework failure. Store it as a set instead.

Fixes #27322

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

- - - - -
2f3cc9ff by Simon Jakobi at 2026-06-08T07:55:49-04:00
testsuite: detect fast bignum via ghc-internal, not removed ghc-bignum

The ghc-bignum package was merged into ghc-internal, so the BIGNUM_GMP
probe in test.mk ran `ghc-pkg field ghc-bignum exposed-modules`, which
fails with "cannot find package ghc-bignum". That error went to stderr
and leaked into the captured stderr of every makefile_test, causing
spurious [bad stderr] failures across the suite. The probe also silently
returned empty, so config.have_fast_bignum was wrongly False even on GMP
builds.

Probe ghc-internal's extra-libraries for the gmp library instead: the
GMP backend module is an other-module (not exposed), but GMP_LIBS adds
gmp to extra-libraries only on a GMP build, so this distinguishes the
backends. Redirect stderr to keep any future missing-package error off
the harness's stderr.

This also removes a stale comment as per suggestion from hsyl20.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

- - - - -
eb3bf6e7 by Alan Zimmerman at 2026-06-08T07:56:32-04:00
EPA: Rename Transform.anchorEof to addModuleCommentOrigDeltas

This now matches what it actually does.

- - - - -
498bb21a by David Eichmann at 2026-06-09T18:02:39-04:00
Hadrian: avoid response files when command line is short enough

This replaces the logic of always using response files on Windows.
With the new condition based on command line lenght, reponse files
can be avoided in many more cases (on windows).

Now that response files are only used in a small number of cases,
response files are always kept and the -r / --keep-response-files
command line options have been removed

The response file paths are nolonger randomized. They are placed in the
`_build/rsp` directory. This ensures they are ignored by git and we
that Hadrian reuses response file paths when rebuilding rather than
leaving stale response files around.

Update user guide putting response files in its own section

- - - - -
87f510a5 by Simon Hengel at 2026-06-09T18:03:25-04:00
Don't use non-breaking spaces

- - - - -
41a19379 by David Eichmann at 2026-06-09T18:04:11-04:00
Hadrian: remove unused wrapper scripts from windows bindist

These wrapper scripts are only installed on non-relocatable builds
which are not generally supported on windows.

- - - - -
ce01ccb6 by sheaf at 2026-06-10T05:08:48-04:00
Don't drop ticks around variables of type `IO ()`

GHC.Core.Utils.mkTick is responsible for placing a tick on a Core
expression. It contains logic for dropping SCCs (non-counting profiling
ticks) around non-function variables, as such variables cannot
meaningfully contribute to profiles. However, the logic for what counts
as a function was incorrect: it used `isFunTy` which returns 'False' for
types such as 'IO ()' where the function arrow is hidden under a
newtype.

We now use 'mightBeFunTy' instead of 'isFunTy'. This ensures we don't
drop ticks in cases we aren't sure.

On the way, we improve the documentation of 'isFunTy', 'isPiTy' and
'mightBeFunTy', and update the latter's implementation to consistently
handle unary classes.

Fixes #27225

-------------------------
Metric Decrease:
    T5642
-------------------------

- - - - -
d311c4f1 by Simon Jakobi at 2026-06-10T05:09:32-04:00
testsuite: Add regression test for #4081

Check that a strict constructor field is unboxed once outside an
enclosing loop, not re-inspected each iteration (the float-out
case-floating from 9cb20b488). Uses simonpj's `data T a = T !a` example
from the ticket; T4081.stderr captures the expected Core.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

- - - - -
333df444 by sheaf at 2026-06-10T05:10:25-04:00
Check for cabal-install >= 3.12 upfront

Starting with commit 8cb99552f607f6bc4000e45ab32532d50c8bb996, Hadrian
requires cabal-install >= 3.12 in order to use the 'cabal path' command
that was introduced in version 3.12, as per
  https://github.com/haskell/cabal/blob/a51c4ee1556d816ad86e90db7e6330dd51b0b6...

This was not reflected in the Hadrian build script, causing a delayed
build failure instead of enforcing the version requirement upfront,
which this patch does.

Fixes #27317

- - - - -
98c20394 by sheaf at 2026-06-10T05:11:09-04:00
Fix crash in Data.Data instance for HsCtxt

The Data.Data instance for HsCtxt contained an error for the 'toConstr'
method, which could trigger for example when looking at -ddump-tc-ast
traces. Replace it with the 'abstractConstr' pattern used in the rest of
the codebase.

- - - - -
5ac9ce7d by Zubin Duggal at 2026-06-10T21:26:32+05:30
hadrian: Remove old package.conf files when generating new ones

Old package.conf files might exists with different hashes, causing issues like #26661

Fixes #26661

- - - - -
c9015f09 by sheaf at 2026-06-11T12:40:28-04:00
Fix AArch64 clobbering bug for MUL2

On AArch64, the code generator could clobber one of the input operands
when computing the lower bits of a MUL2 operation. This rendered invalid
the subsequent computation of the high bits.
This commit fixes that by using a temporary register. The register
allocator can remove the redundant move in the common case when the
registers do not conflict.

Fixes #27046

- - - - -
7ab90288 by Rodrigo Mesquita at 2026-06-11T12:41:11-04:00
fix: make T27131 less flaky

It seems that T27131 fails flakily in a race where we check the flag
before the capability had the chance to process the mailbox which sets
the flag. This seemingly should only happen if the capability ends up
being the same for setting and checking the flag.

- - - - -
8965cb76 by Marc Scholten at 2026-06-12T04:53:22-04:00
haddock: render modules concurrently

- - - - -
8cc0b64a by Duncan Coutts at 2026-06-12T04:54:06-04:00
Promote HAVE_PREEMPTION from Timer.c to OSThreads.h

We will want to know about HAVE_PREEMPTION in more places.

HAVE_PREEMPTION tells us that we do have OS threads available,
irrespective of whether THREADED is defined. In particular,
HAVE_PREEMPTION is defined on all proper OSs, but not on WASM (and
hyopthetically may not be true on some other platforms like
micro-controllers, RTOSs, VM hypervisors etc).

- - - - -
cce574ed by Duncan Coutts at 2026-06-12T04:54:06-04:00
Define ACQUIRE_LOCK_ALWAYS and friends

Fix issue #27335

Like the atomic _ALWAYS variants, these lock actions are always defined,
rather than being dependent on whether we are in the THREADED case. All
the "normal" LOCK macros are defined to be no-ops when !THREADED.

The use case for the _ALWAYS variants is where we are using OS threads
even in the non-threaded RTS. This includes everything to do with the
timer/ticker thread, which is used in the non-threaded RTS too.

In particular, we will want to use this for eventlog things, because the
timer thread performs eventlogging concurrently with the main
capability, even in the non-threaded RTS.

- - - - -
1f28d1f6 by Duncan Coutts at 2026-06-12T04:54:06-04:00
Use ACQUIRE/RELEASE_LOCK_ALWAYS with eventBufMutex

Even in the non-threaded RTS the eventBufMutex is needed by both the
main capability and the timer/ticker thread, so always use the mutex.

This should fix #25165 which is about the main capability and the timer
thread posting events to the eventlog buffer concurrently and thereby
corrupting the buffer data.

- - - - -
0ff29782 by Duncan Coutts at 2026-06-12T04:54:06-04:00
Expose eventBufMutex in the EventLog interface/header

We will need it in forkProcess to ensure we don't write to the global
eventlog buffer concurrently with trying to flush eventlog buffers and
do the fork().

- - - - -
7a688395 by Duncan Coutts at 2026-06-12T04:54:07-04:00
Split flushAllCapsEventsBufs into safe and unlocked version

Following the convention that unlocked versions have a trailing _
underscore in their name. This one requires the caller to hold the
eventlog global buffer mutex. We will need this in forkProcess.

- - - - -
341ed474 by Duncan Coutts at 2026-06-12T04:54:07-04:00
Remove redundant use of stopTimer in setNumCapabilities

Historically, the comment here was:

  We must stop the interval timer while we are changing the
  capabilities array lest handle_tick may try to context switch
  an old capability. See #17289.

and

  We must disable the timer while we do this since the tick handler may
  call contextSwitchAllCapabilities, which may see the capabilities array
  as we free it.

What this refers to is that historically, when changing the number of
capabilities, the array of capabilities was reallocated to a new size,
allocating new ones and freeing the old ones, thus invalidating all
existing capbility pointers.

Strangely, for good measure the code used to call stopTimer twice (hence
the two similar comments above).

However, since commit a3eccf06292dd666b24606251a52da2b466a9612, the
capabilities array is no longer reallocated. Instead the array is
allcoated once on RTS startup to the maximum size it could ever be
allowed to be, and then capabilities get enabled/disabled at runtime. So
the capability pointers never become invalid anymore. At worst, they may
point to capabilities that are disabled.

Thus we no longer need to stop the timer (twice) while we change the
number of enabled capabilities. This also partially solves issue #27105,
which notes that stopTimer is being used as if it were synchronous, when
it is not. At least for this case, the solution is that stopTimer is not
needed at all!

- - - - -
674858e3 by Duncan Coutts at 2026-06-12T04:54:07-04:00
Remove redundant use of stopTimer in forkProcess

but replace it with taking the eventlog buffer lock during the fork.

Fixes issue #27105

The original reason to block the timer during a fork was that
historically the timer was implemented using a periodic timer signal,
and the signal itself would interrupt the fork system call (returning
EINTR). For large processes (where fork() takes a while) this could
permanently livelock: the timer always would go off before the fork
could complete, which got retried in a loop forever.

The timer is no longer implemented as a unix signal, but uses threads.
Thus the original problem no longer exists. The only remaining reason to
block the timer tick is to prevent actions taken by the tick from
interfering with the delicate process involved in fork (taking a load of
locks and pausing everything).

The only thing we need to do is to prevent the eventlog from being
written to or flushed while the fork is taking place. To achieve this
all we need to do is hold the mutex for the global eventlog buffer.

This removes the last use of stopTimer that expects stopTimer to work
synchronously (which it was not) and thus solves issue #27105. To be
clear, we solve issue #27105 not by making stopTimer synchronous, but by
eliminating the use sites that expected it to be synchronous.

- - - - -
40764930 by sheaf at 2026-06-12T14:54:43-04:00
Add type family performance test for #26426

Some GHC versions produced large numbers of coercions after typechecking
and desugaring when compiling the program in #26426:

Version | Typechecker time | Typechecker allocations | Coercions
-------:|-----------------:|------------------------:|---------:
9.6     |   47 ms          |  48 MB                  |    110k
9.8     | 1000 ms          | 486 MB                  | 10,437k
9.10    |  922 ms          | 489 MB                  | 10,436k
9.12    |  906 ms          | 482 MB                  | 10,437k
9.14    |   63 ms          |  55 MB                  |    333k
10.0    |   47 ms          |  64 MB                  |     35k

The improvement 9.12 -> 9.14 was due to commit 22d11fa818fae2c95c494fc0fac1f8cb4c6e7cb6,
while the improvement 9.14 -> 10.0 was due to commit 0b7df6db9e46df40e86fbff1a66dc10440b99db5.

As the behaviour of GHC seems better than it's ever been on this program,
we declare victory, adding this performance test to ensure we don't
regress on this program.

On the way, we update Note [Combining equalities] in GHC.Tc.SolveR.Equality
with the explanation of the 9.12 -> 9.14 improvement (getting rid of an
exponential blowup in coercion sizes), and we update
Note [Exploiting closed type families] in GHC.Tc.Solver.FunDeps with
the explanation of the 9.14 -> 10.0 improvement (bringing down coercion
size growth from cubic to quadratic).

- - - - -
0f3d0a71 by Zubin Duggal at 2026-06-12T14:55:30-04:00
compiler: mark tool messages as errors/warnings depending on the exit code

Fixes #27370

- - - - -
d9ea2d76 by mangoiv at 2026-06-13T04:41:51-04:00
libraries/process: bump submodule to v1.6.30.0

- bump the submodule to the appropriate tag
- suppress benign warning resulting from the change

- - - - -
6ebaaba3 by David Eichmann at 2026-06-13T04:42:37-04:00
ghc-toolchain: don't throw when candidate executables are not found

Fixes #27369

- - - - -
6c65e1e1 by David Eichmann at 2026-06-13T04:43:23-04:00
CI: lint-changelog checks for no-changelog label in script instead of rules

- - - - -
bab37cc6 by konsumlamm at 2026-06-13T19:10:21+02:00
Implement CLC proposal #378

Add `Data.Double` and `Data.Float` modules
Document that GHC uses IEEE 754

- - - - -
fb5246ad by fendor at 2026-06-15T18:07:23-04:00
Drop `preloadClosure` from `UnitState`

It is always hard-coded to the same value.

Backpack Unit instantiation isn't using it any more.
Allows us to simplify the API and get rid of `improveUnit`.

- - - - -
291ce3aa by ARATA Mizuki at 2026-06-15T18:08:26-04:00
RISC-V NCG: Zero-extend the result of castFloatToWord32

According to the ISA manual, FMV.X.W sign-extends the result.
We need to truncate the result to avoid creating an exotic Word32 value.

Fixes #27300

- - - - -
011be91f by ARATA Mizuki at 2026-06-15T18:08:26-04:00
RISC-V NCG: Treat d28-d31 (ft8-ft11) as caller-saved

According to the calling convention, the registers d28-d31 (ft8-ft11) are caller-saved.

Fixes #27306

- - - - -
e8a54713 by ARATA Mizuki at 2026-06-15T18:08:26-04:00
RISC-V NCG: Set rounding mode when emitting `truncate`

If we omit the rounding mode for `fcvt`, `dyn` will be used.
We do not want that for `truncate`, so we set `rtz`.
In other places, we set `rne` because we do not use the dynamic rounding mode.

Fixes #27303

- - - - -
9438bec7 by Zubin Duggal at 2026-06-15T18:09:11-04:00
rts: fix validate build with gcc 16. `__attribute__((regparm(1)))` is ignored on x86_64 and now
gcc warns that it is ignored:

rts/sm/Evac.h:35:1: error:
     error: ‘regparm’ attribute ignored [-Werror=attributes]

See https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=ccead81bbc39668376eb5cf47066ac...

Fixes #27366

- - - - -
893e6133 by Andrew Lelechenko at 2026-06-15T23:55:36+01:00
base: more NonEmpty zips

CLC proposal: https://github.com/haskell/core-libraries-committee/issues/409

- - - - -
1314f2fd by David Eichmann at 2026-06-16T05:46:52-04:00
Hadrian: fix ghc-internal .def file name

- - - - -
7f72bcb3 by mangoiv at 2026-06-16T05:47:39-04:00
compiler: ignore camelCase and Eta reduce hlint hints

These do not cohere with the style used in GHC. After disabling them,
hlint lints are much less noisy again.

- - - - -
842bef9f by Alan Zimmerman at 2026-06-16T05:48:25-04:00
EPA: Use standard type family declaration for Anno

- - - - -
f6d30767 by Wolfgang Jeltsch at 2026-06-16T15:32:34-04:00
Fix two issues in the documentation of pipeline interruption

One issue is a typo (“interreuptible”), the other one the lack of an end
of a sentence, which has been reconstructed from the message of
633bbc1fd4762a2bb73ba1c5b9e0c279f1dd3c40, the commit that introduced
said documentation.

- - - - -
a3fa10e0 by Christian Georgii at 2026-06-16T15:33:26-04:00
Find plugins in sibling home units in multiple-home-unit sessions

In a multiple-home-unit session (e.g. `cabal repl --enable-multi-repl` or HLS), enabling a plugin with -fplugin that is defined in (or reexported by) another home unit failed with a "hidden package" error. The plugin module finder only searched the current home unit and the registered external packages, never the sibling home units.

findPluginModuleNoHsc now searches the home units that the current home unit depends on, following module reexports and respecting hidden modules, exactly as ordinary import resolution does in findImportedModuleNoHsc. To avoid two divergent copies of this logic, the shared home-unit search (the current home unit first, then its dependencies in priority order, with the accompanying ordering invariant) is extracted into findHomeModuleAmongDeps, which both findImportedModuleNoHsc and findPluginModuleNoHsc now call.

Add testsuite/tests/driver/multipleHomeUnits/plugin01, which loads a plugin as byte-code from a sibling home unit, and plugin02, in which the consumer enables a plugin reexported by a sibling home unit without depending on the plugin's own home unit directly.

Fixes #27349

- - - - -
d216412b by Ian-Woo Kim at 2026-06-16T20:25:57-04:00
Make the order of usages deterministic

It has been observed that the ordering of usages can be non-determinstic
in parallel builds. Therefore, this contribution introduces sorting of
usages based on a platform- and race-independent sorting criterion.

Resolves #26877.

Co-authored-by: Wolfgang Jeltsch <wolfgang@well-typed.com>

- - - - -
8e1cc105 by Wolfgang Jeltsch at 2026-06-16T20:25:57-04:00
Change the descriptions of two existing changelog entries

The descriptions now describe the changes in a user-friendly manner, as
opposed to describing the contributions that led to these changes in a
developer-friendly manner.

- - - - -
636c1c7a by Ian Duncan at 2026-06-16T20:26:50-04:00
AArch64: use SXTH, not SXTW, for W32 signExtendReg

signExtendReg was using SXTH (sign-extend halfword, 16-bit) for
W32-to-W64 sign extension. This should be SXTW (sign-extend word,
32-bit). SXTH only sign-extends the lower 16 bits, producing wrong
results for 32-bit values whose bit 15 differs from bit 31.

Other fixes:

  - At sub-W64, code gen for MO_S_Mul2 should use W32 registers for
    SMULL source operands as per the ARM spec (SMULL Xd, Wn, Wm),
    and not W64.

  - Ensure signExtendReg uses the source width for the source operand
    in SXTW/SXTH/SXTB instructions. GNU as requires sxtw Xd,Wn (not
    sxtw Xd,Xn), while LLVM's integrated assembler on macOS is lenient.

  - Fix overflow flag computation for `MO_S_Mul2`. The overflow bit
    was exactly inverted for sub-W64 operands.

Fixes #26978 and #27047

- - - - -
b734c75d by Igor Ranieri at 2026-06-16T20:27:32-04:00
haddock: Update CONTRIBUTING with missing step, add missing test
dependency

- - - - -
7fe4f2ec by Luite Stegeman at 2026-06-17T05:35:09-04:00
tag inference: don't confuse functions with their return values

inferTagRhs was mixing up taggedness for closures and return values
for function closures. We really shouldn't assign TagTuple to a
properly tagged function returning a tuple.

We fix this by keeping track of functions (TagFun) separately from
values (TagVal) and keeping track of their return value. TagFun is
also used for join points.

fixes #27005

- - - - -
4671c126 by Sebastian Graf at 2026-06-17T05:35:55-04:00
Seed the simplifier's in-scope set for open expressions

simplifyExpr simplifies expressions typed at the GHCi prompt and the
results of Template Haskell splices. Such an expression may be open: at a
GHCi debugger breakpoint its free variables include RuntimeUnk skolems
standing for as-yet-unknown types.

The simplifier began with an in-scope set holding only the wildcard
binder, so when it instantiated the unsafeCoerce# wrapper that GHCi
builds around a result, it formed a substitution whose range mentioned a
free skolem that was not in scope. That breaks the substitution invariant
and, in a compiler built with assertions, trips substTy's sanity check.

Seed the initial in-scope set with the free variables of the expression.
For a closed expression this adds nothing.

See Note [Seed the in-scope set for open expressions].

Fixes #17833 and its duplicate #21118.

- - - - -
67d41299 by Sebastian Graf at 2026-06-18T05:18:24-04:00
Desugar a `case` scrutinee only once (#27383, #20251)

In `dsExpr` for `HsCase` we desugared the scrutinee /twice/: once to
build the Core `case` itself, and again inside `matchWrapper`, which
re-desugared the source scrutinee (via `addHsScrutTmCs`) purely to
record long-distance information for the pattern-match checker.

For a single `case` that is merely wasteful.  But for nested cases it
is catastrophic.  Consider

    case (case (case e of ... ) of ... ) of ...

Desugaring the outer scrutinee desugars the middle `case` twice, each
of which desugars the inner `case` twice, and so on.  The work doubles
at every level, so desugaring takes O(2^n) time in the nesting depth.
That is the blowup reported in #27383; it is also what makes the
machine-generated program in #20251 take an age to compile.

The fix is simple.  `matchWrapper` is handed the scrutinee anyway, so
we give it the Core expression we have /already/ desugared, and record
the long-distance term constraint with `addCoreScrutTmCs` instead of
re-desugaring from source.  This is just what `matchSinglePatVar`
already does for single-pattern matches.

So:

* `matchWrapper` now takes `Maybe [CoreExpr]` rather than
  `Maybe [LHsExpr GhcTc]`.

* The `HsCase` equation of `dsExpr` passes the already-desugared
  `core_discrim`; the arrow desugarer passes its match variables.

* `addHsScrutTmCs` had no other use, so it is gone.

Desugaring is now linear in the nesting depth.  (The coverage checker
still runs `simpleOptExpr` over each scrutinee, which leaves the total
at O(n^2); that is ample.)  The long-distance information itself is
unchanged: the checker sees precisely the Core that backs the
generated code.

Test: deSugar/should_compile/T27383

- - - - -
fa5defde by Rodrigo Mesquita at 2026-06-18T05:19:11-04:00
fix: Save FastStrings in the PMC

There is no point in adding the unique to the occurrence FastString we
create, since it is part of the Id anyway.

Adding it to the FastString, meant each FastString was unique
unnecessarily!

In a separate branch, running the compiler on test `InstanceMatching`
observed 30000 `FastString`s created by this code path.

Plus, `fsLit "pm"` follows the existing pattern in `mkPmId`.

- - - - -
4efb4a66 by Alan Zimmerman at 2026-06-18T14:41:14-04:00
TTG: Add extension points to HsConDetails

Extend HsConDetails as

    data HsConDetails p arg rec
      = PrefixCon !(XPrefixCon p) [arg]    -- C @t1 @t2 p1 p2 p3
      | RecCon    !(XRecCon p)    rec      -- C { x = p1, y = p2 }
      | InfixCon  !(XInfixCon p)  arg arg  -- p1 `C` p2
      | XHsConDetails !(XXHsConDetails p)

    type family XPrefixCon      p
    type family XRecCon         p
    type family XInfixCon       p
    type family XXHsConDetails  p

- - - - -
c8d27dd4 by Simon Jakobi at 2026-06-18T14:41:59-04:00
CI: quiet submodule clean output in after_script and setup

The clean and cleanup_submodules functions ran 'git submodule foreach
git clean -xdf', flooding the job log with 'Entering ...' and
'Removing ...' lines. Pass --quiet to 'git submodule' and -q to 'git
clean' to drop the success output; errors are still reported.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>

- - - - -
09326ca6 by Matthew Pickering at 2026-06-20T23:41:12+02:00
Add missing req_interp modifier to T18441fail3 and T18441fail19

These tests require the interpreter but they were failing in a different
way with the javascript backend because the interpreter was disabled and
stderr is ignored by the test.

- - - - -
521e55bf by Matthew Pickering at 2026-06-20T23:41:13+02:00
hadrian: Fill in more of the default.host toolchain file

When you are building a cross compiler this file will be used to build
stage1 and it's libraries, so we need enough information here to work
accurately. There is still more work to be done (see for example, word
size is still fixed).

- - - - -
23c9b6c3 by Matthew Pickering at 2026-06-20T23:42:52+02:00
hadrian: Build stage 2 cross compilers

* Most of hadrian is abstracted over the stage in order to remove the
  assumption that the target of all stages is the same platform. This
  allows the RTS to be built for two different targets for example.
* Abstracts the bindist creation logic to allow building either normal
  or cross bindists. Normal bindists use stage 1 libraries and a stage 2
  compiler. Cross bindists use stage 2 libararies and a stage 2
  compiler.
* hadrian: Make binary-dist-dir the default build target. This allows us
  to have the logic in one place about which libraries/stages to build
  with cross compilers. Fixes #24192

New hadrian target:

* `binary-dist-dir-cross`: Build a cross compiler bindist (compiler =
  stage 1, libraries = stage 2)

This commit also contains various changes to make stage2 compilers
feasible.

-------------------------
Metric Decrease:
    LinkableUsage02
    ManyAlternatives
    ManyConstructors
    MultiComponentModulesRecomp
    MultiLayerModulesRecomp
    RecordUpdPerf
    T10421
    T12150
    T12227
    T12425
    T12707
    T13035
    T13379
    T13820
    T15703
    T16577
    T18140
    T18282
    T18698a
    T18698b
    T18923
    T1969
    T20049
    T21839c
    T3294
    T4801
    T5030
    T5321FD
    T5321Fun
    T5631
    T5642
    T6048
    T783
    T9020
    T9198
    T9233
    T9630
    T9872d
    T9961
    parsing001
    T3064

Metric Increase:
    T26989
    hard_hole_fits
-------------------------

Co-authored-by: Sven Tennie <sven.tennie@gmail.com>

- - - - -
26fed8ab by Matthew Pickering at 2026-06-20T23:42:52+02:00
ci: Test cross bindists

We remove the special logic for testing in-tree cross
compilers and instead test cross compiler bindists, like we do for all
other platforms.

- - - - -
80c8910e by Matthew Pickering at 2026-06-20T23:42:52+02:00
ci: Introduce CROSS_STAGE variable

In preparation for building and testing stage3 bindists we introduce the
CROSS_STAGE variable which is used by a CI job to determine what kind of
bindist the CI job should produce.

At the moment we are only using CROSS_STAGE=2 but in the future we will
have some jobs which set CROSS_STAGE=3 to produce native bindists for a
target, but produced by a cross compiler, which can be tested on by
another CI job on the native platform.

CROSS_STAGE=2: Build a normal cross compiler bindist
CROSS_STAGE=3: Build a stage 3 bindist, one which is a native compiler and library for the target

- - - - -
8215573d by Sven Tennie at 2026-06-20T23:42:52+02:00
ci: Increase timeout for emulators

Test runs with emulators naturally take longer than on native machines.

Generate jobs.yml

- - - - -
5acb7dbc by Matthew Pickering at 2026-06-20T23:42:52+02:00
ci: Javascript don't set CROSS_EMULATOR

There is no CROSS_EMULATOR needed to run javascript binaries, so we
don't set the CROSS_EMULATOR to some dummy value.

- - - - -
48345343 by Sven Tennie at 2026-06-20T23:42:52+02:00
Javascript skip T23697

See #22355 about how HSC2HS and the Javascript target don't play well
together.

- - - - -
5e44fd05 by Sven Tennie at 2026-06-20T23:42:52+02:00
Mark T24602 as fragile

It was skipped before (due to CROSS_EMULATOR being set, which changed
for JS), so we don't make things worse by marking it as fragile.

- - - - -
ab349ec2 by Sven Tennie at 2026-06-20T23:42:52+02:00
Fix T22744 for GHCJS

In fact, this test needs Template Haskell, not necessarily an
interpreter.

- - - - -
c73352d8 by Sven Tennie at 2026-06-20T23:42:52+02:00
haddock-test: fix GHCJS haddock test failures

Add --ghc-pkg-path flag support so haddock test runner can find
cross-prefixed ghc-pkg (e.g. javascript-unknown-ghcjs-ghc-pkg) which
is not on $PATH in cross install directories.

Skip haddockHtmlTest on GHCJS: Threaded.hs uses forkOS in a TH splice,
which GHCJS RTS doesn't support. Mark with js_skip in all.T.

- - - - -
5e814e76 by Andreas Klebinger at 2026-06-22T23:00:24-04:00
compiler: Deduplicate hscTidy

This function was accidentally duplicated during a refactor.

Fixes #27351

- - - - -
473b97eb by sheaf at 2026-06-22T23:01:22-04:00
Avoid mkTick in Core Prep breaking ANF (part II)

Hotfix for 2f9579765f55b3920ceb2e04995ff41a9d0e2d4e fixing a small
oversight in the call to tickTickedExpr from mkTick, in which we
improperly recursively called mkTick without passing on the preserve_anf
flag.

Fixes #27386

- - - - -
9284a1f7 by Simon Hengel at 2026-06-23T05:55:33-04:00
Don't use global variables to address concurrency bugs! (fixes #27234)

This was originally introduce with
88f38b03025386f0f1e8f5861eed67d80495168a to address #17922.

In this specific case a better fix would have been to synchronize on
stderr:

    withHandle_ "stderrSupportsAnsiColors" stderr $ \ _ -> do
      ...

But apparently the dependency on `terminfo` was removed in
32ab07bf3d6ce45e8ea5b55e8095174a6b42a7f0, preventing #17922 in the first
place.

- - - - -
44309cd3 by Alan Zimmerman at 2026-06-23T05:56:20-04:00
EPA: remove LocatedL / SrcSpanAnnL and  LocatedLI / SrcSpanAnnLI

This is part of a refactor towards only having LocatedA / SrcSpanAnnA

It removes the stated items, but has to add back one for BooleanFormula,
LocatedBF / SrcSpanAnnBF

This commit also use the HsConDetails RecCon extension point to
capture the braces in a record constructor

- - - - -
2f6a5534 by Simon Jakobi at 2026-06-23T15:46:20+02:00
Add -dstable-core-dump-order for stable Core dump ordering (#27296)

The order of top-level bindings in Core dumps (-ddump-simpl etc.) is the
compiler's Unique-sensitive internal processing order, so an unrelated
upstream change can reorder them and defeat a textual diff of two dumps.

This adds an opt-in flag -dstable-core-dump-order that reorders the
top-level bindings of dumps routed through dumpPassResult into a stable,
Unique-independent order, so two dumps line up across rebuilds. See
Note [Stable Core dump order] in GHC.Core.Ppr for the sort key and its
rationale.

Adds tests T27296 (binders GHC emits in non-source order by default,
asserted to come out stably ordered under the flag) and T27296b (an
untidied -ddump-float-out dump pinning the ordering of the anonymous lvl
floats by literal value).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>

- - - - -
141986e3 by mangoiv at 2026-06-24T15:51:14-04:00
compiler: refactor error reporting code for ExplicitLevelImports

Refactors error reporting code for ExplicitLevelImports to pass in a
RdrName and a GlobalReaderElt to be able to report errors that are
faithful to the source and to more precisely distinguish between names
that are in scope from different qualifications.

Fixes #27385 and #26616

- - - - -
aa7df6b6 by Simon Hengel at 2026-06-24T15:52:18-04:00
Set GHC_VERSION when calling custom pre-processors (see #25952)

(so that pre-processors can emit backwards compatible code)

- - - - -
a9e494f2 by Simon Hengel at 2026-06-24T15:54:08-04:00
Add a flag to control GHCi specific error hints (close #27409)

- - - - -
a805b2a2 by Simon Hengel at 2026-06-24T15:55:20-04:00
Reference correct package in error messages for reexported modules

(fixes #27417)

- - - - -
f235d183 by Simon Jakobi at 2026-06-25T05:51:18-04:00
Add explicit setBit/clearBit/complementBit for instance Bits Integer (#21176)

The default setBit, clearBit, and complementBit methods allocate
intermediate Integers per call. Define them explicitly via the new
integerSetBit[#], integerClearBit[#] and integerComplementBit[#], built
on the BigNat# primitives, which avoid those allocations. Allocation is not
eliminated entirely -- the negative (IN) cases would need in-place mutation,
which is left as future work.

The default methods constant-folded on literal arguments via the
integerOr/integerAnd/integerXor rules, which fold literal Integers of any
size. The explicit functions have no such rule, so they (their Word-argument
wrappers, and the Bits Integer methods) are marked INLINE to expose the
underlying primops to the simplifier; see Note [INLINE for constant folding
of bit operations]. This restores folding only on the small-int (IS) path --
large literal Integers (IP/IN) are no longer constant-folded, a minor
regression for that case. T8832 covers the IS-path folding.

The new golden-output test T21176 checks all three operations against the
default implementations across the sign/size boundaries, recording each
result plus its integerCheck validity. The base and ghc-bignum interface-
stability export goldens gain the new functions.

The main changelog entry lives in changelog.d under a new ghc-internal
section (renamed from ghc-prim).

CLC proposal: https://github.com/haskell/core-libraries-committee/issues/423

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

- - - - -
202ed264 by Marc Scholten at 2026-06-25T05:52:21-04:00
haddock: use Text in documentation pipeline

This patch moves Haddock's documentation pipeline from String to Text
where the data is already textual. It avoids repeated conversions while
keeping the existing decoding behavior for invalid UTF-8 docstring
chunks.

The main changes are:

* Render and carry docstrings as Text in Haddock-facing paths.
* Use the Binary Text instance from GHC.Utils.Binary for Haddock
  interface files, and bump the Haddock binary interface version.
* Add a FastString HTML instance so XHTML rendering avoids
  intermediate String allocation.
* Keep HsDocStringChunk decoding lenient, matching the previous
  unpackHDSC behavior on invalid UTF-8 input.
* Update the xhtml submodule to 3000.4.1.0, which contains the
  apostrophe escaping fix used by the Haddock test output.

Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Assisted-by: Codex <codex@openai.com>

- - - - -
a72ff58f by mangoiv at 2026-06-25T05:53:07-04:00
compiler: rename ZonkAny to UnusedType and add pretty printing logic

ZonkAny is a hard to understand name for users who do not know how the
compiler works internally. Additionally, it is confusing that ZonkAny,
while being a concrete type *represents* a meta variable, espeically in
the compiler output.
This patch changes the name of ZonkAny to UnusedType which is closer to
its intended semantics and adds special pretty printing logic to display
this type in the same fashion the compiler displays meta variables in
other places, whenever they leak from the implementation to the user.
It also exports the type from ghc-internal:GHC.Internal.Types in order
to expose documentation.

Fixes #27390

Co-Authored-By: Sam Derbyshire <sam.derbyshire@gmail.com>

- - - - -
6813f002 by Simon Jakobi at 2026-06-26T04:51:47-04:00
Reg.Linear: drop Platform argument from most FR (FreeRegs) methods

The FR class has one instance per CPU architecture, so any
architecture-constant information its methods derived from the Platform
argument can instead be baked into the instance. This removes the now
needless Platform argument from frAllocateReg, frGetFreeRegs and
frReleaseReg.

frInitFreeRegs keeps its Platform argument: the initial allocatable set is
genuinely platform-dependent, see Note [Aarch64 Register x18 at Darwin and
Windows].

Fixes #26665

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>

- - - - -
3b2a9409 by Zubin Duggal at 2026-06-26T04:52:39-04:00
testsuite: Report fragile failures as skipped in JUnit output

- - - - -
27463426 by Rodrigo Mesquita at 2026-06-26T20:54:58-04:00
perf: Share Module in Iface Symbol Table

This commit modifies the structure of the serialized `SymbolTable Name`
to then re-use and share the `Module` (both on disk and in memory) across
all `Name`s from the same module.

The new structure looks like:

  <total name count>
  $modules.size
  for (mod, names) in $modules:
    $mod
    $names.size
    for table_ix, occ in $names
      $table_ix
      $occ

i.e. we put the module just once, followed by all names in that module.
When deserializing, we deserialize the module just once, and all the
following `Name`s are constructed with a pointer to that same decoded
`Module`.

In `hoogle-test`, we must use `DNameEnv` rather than `Map Name`,
otherwise the output fixities order was susceptible to changes in the
uniques assigned to each Names, which is not stable.

Fixes #27401

-------------------------
Metric Decrease:
    InstanceMatching
    LinkableUsage01
    LinkableUsage02
    hard_hole_fits
-------------------------

- - - - -
412f1675 by Simon Hengel at 2026-06-26T20:55:41-04:00
Rename `MCDiagnostic` to `InternalMCDiagnostic`

`MCDiagnostic` is meant to be used for compiler diagnostics.

Any code that creates `MCDiagnostic` directly, without going through
`GHC.Driver.Errors.printMessage`, sidesteps `-fdiagnostics-as-json` (see
e.g. !14616, !14475, !14492 !14548).

To avoid this in the future, this change more narrowly controls who
creates `MCDiagnostic` (see #24113).

- - - - -
6f212121 by Facundo Domínguez at 2026-06-26T20:56:27-04:00
Encapsulate options of occurAnalysePgm in a record

- - - - -
adfbb179 by Facundo Domínguez at 2026-06-26T20:56:27-04:00
Allow to configure the occurrence analyser to retain some dead bindings

This is needed by plugins that are the only consumers of a binding which
is otherwise unused in the program.

See Note [Controlling elimination of dead bindings in occurrence analysis]
added in this commit, or
https://gitlab.haskell.org/ghc/ghc/-/issues/27240 for more discussion.

- - - - -
c745b11f by Copilot at 2026-06-26T20:56:27-04:00
Address documentation feedback

- - - - -
2c2a4a2a by Copilot at 2026-06-26T20:56:27-04:00
Keep the imp_rules parameter of occurPgmAnalysePgm and add occ_opts to OccEnv

- - - - -
e2262b0e by Copilot at 2026-06-26T20:56:27-04:00
Strengthen T27240.hs with a binding that should be removed

- - - - -
5f9d9268 by Copilot at 2026-06-26T20:56:27-04:00
Move the reference #27240 to a related paragraph

- - - - -
d86d2644 by Simon Hengel at 2026-06-26T20:57:10-04:00
Remove deprecated flag `-ddump-json` (see #24113)

This was first deprecated in 9.10.1.

- - - - -
3b15ff03 by Simon Jakobi at 2026-06-27T18:48:34+02:00
Tweak mk_mod_usage_info

* Use O(log n) `elemModuleEnv` instead of O(n) `elem` to filter the
  direct imports.
* Use `nonDetModuleEnvKeys` to avoid sorting the ent_map keys twice.
* Prepend the presumably shorter list when creating all_mods with
  `(++)`. Actually this eliminates the `(++)` entirely, as it seems to
  fuse with the `filter` expression.

As a result there is a tiny speed-up when generating the .hi-files for
modules with many imports.

None of the changes affect compilation determinism as the module list
is explicitly sorted to ensure a canonical order.

- - - - -
2d0fd154 by Alan Zimmerman at 2026-06-29T11:44:00-04:00
EPA: Remove LocatedC / SrcSpanAnnC

This is part of a cleanup of the zoo of
SrcSpanAnnXXX types for exact print annotations.

This one removes SrcSpanAnnC used for storing exact print annotations
for contexts. It replaces it with an explicit `HsContext` data type
that carries the annotations and the context.

So, replace

  type HsContext pass = [LHsType pass]

with

  type HsContext pass = HsContextDetails pass (LHsType pass)

  data HsContextDetails pass arg
    = HsContext
      { hsc_ext  :: !(XHsContext pass)
      , hsc_ctxt :: [arg]
      }
    | XHsContextDetails !(XXHsContextDetails pass)

We need the parameterised HsContextDetails because it is used both for
HsQual carrying 'LHsExpr p' and "normal" contexts carrying 'LHsType p'.

- - - - -
cca0d589 by Luite Stegeman at 2026-06-30T13:33:40-04:00
rts: handle large AP closures in compacting GC

The function update_fwd_large in the compacting GC could run into
an unexpected object with the following error:

  internal error: update_fwd_large: unknown/strange object  24

Closure type 24 is the AP closure, which was not handled in
upd_fwd_large. This patch adds handling them.

fixes #27434

- - - - -
42935858 by Luite Stegeman at 2026-06-30T13:33:40-04:00
testsuite: use compacting_gc way instead of hardcoding +RTS -c

- - - - -
bf7b5ce6 by Alan Zimmerman at 2026-06-30T13:34:23-04:00
EPA: Remove LocatedLW from LStmtLR

HsDo already had its XDo extension point for an
AnnList, which also appeared in LocatedLW.
So we remove the redundant one and use the one inside HsDo
as originally intended.

Also delete LocatedLC/LocatedLS as they were unused

- - - - -
d7cfea49 by Recursion Ninja at 2026-06-30T21:37:12-04:00
Decoupling 'L.H.S' from 'GHC.Types.SourceText'

  * Migrated 'IntegralLit'   to 'L.H.S.Lit'.
  * Migrated 'FractionalLit' to 'L.H.S.Lit'.
  * Migrated 'StringLiteral' to 'L.H.S.Lit'.
  * Added TTG extension points to the types above.
  * Added nice export list to 'GHC.Hs.Lit'.
  * Added 'rnOverLitVal' and 'tcOverLitVal' functions to 'GHC.Hs.Lit'.
  * Added instance 'Anno (StringLiteral (GhcPass p)) = SrcSpanAnnN'
  * Moved [Notes] about 'SourceText' from 'L.H.S.*' to 'GHC.*'.
  * Removed all references to 'SourceText' from 'L.H.S'.
  * Removed the trailing comma record field from  'StringLiteral'
  * Renamed exported functions for nomenclature consistency.
  * Deprecated the renamed functions

Fixes #26953

- - - - -
a1f2558b by Recursion Ninja at 2026-06-30T21:37:12-04:00
Monomorphising GHC pass parameters where appropriate

- - - - -
7bf9e3c5 by Teo Camarasu at 2026-06-30T21:38:03-04:00
Make Q abstract

This patch aims to clearly demarcate the internal and external interfaces
of Q.
In the past the `Quasi` typeclass was both part of the external,
public-facing interface, and was used to give the implementation of `Q`.

Now we separate out these two distinct roles. `Quasi` continues to exist
in the public interface, but we introduce a new `MetaHandlers` type,
which is equivalent to `Dict Quasi`.

`Q a` is now defined to be `MetaHandlers -> IO a`, and, crucially,
the constructor and the new `MetaHandlers` type are not exposed from the
public interface.

This gives us the ability to vary the interface on the GHC side without
forcing a breaking change on the `template-haskell` side.
Similarly `template-haskell` has more freedom to change the `Quasi`
typeclass without needing any changes in `lib:ghc`.

Implements https://github.com/ghc-proposals/ghc-proposals/pull/700

Resolves #27341

- - - - -
4262af36 by L0neGamer at 2026-06-30T21:38:56-04:00
generically defines mconcat in terms of internal type's Semigroup instance

add changelog entry

use simpler definition for mconcat

`nonEmpty` isn't available yet; inline branches in case

add test case

fixup generically defines mconcat in terms of internal type's Semigroup instance

add comment on Generically and deriving mishaps

swap mconcat to foldr version

add some strictness testing for mconcat

add to `base` changelog entry

- - - - -
e22ad997 by Cheng Shao at 2026-06-30T21:39:43-04:00
hadrian/rts: fix unregisterised build for gcc 15+

This patch fixes unregisterised build for gcc 15+:

- Pass -optc-Wno-error in hadrian when +werror enables -optc-Werror,
  see added comment for details.
- For RTS functions that the codegen would emit calls, ensure their
  real prototype is hidden when the header is included in .hc fies
  (IN_STG_CODE), and the dummy prototype is provided to match the EFF_
  convention.

In the future we should get rid of EFF_ (#14647) and remove these
hacks, but for now this patch makes unregisterised work again on newer
toolchains. Fixes #27404.

Co-authored-by: Codex <codex@openai.com>

- - - - -
3f00f234 by Cheng Shao at 2026-06-30T21:40:32-04:00
compiler: fix missing handling of CmmUnsafeForeignCall node in LayoutStack

This patch fixes missing handling of `CmmUnsafeForeignCall` middle
node in the `LayoutStack` pass.

Before proc-points splitting, this pass computes liveliness of local
registers, and spills those alive across a Cmm native call onto the
stack. It need to traverse all middle nodes in each block and check
whether a local register is an assignee, if so then the previous
mapping in `sm_regs` is invalidated and needs to be dropped. However,
it didn't handle `CmmUnsafeForeignCall` node which may also assign to
a local register. When proc-points splitting is enabled, this can
produce an invalid basic block that doesn't properly backup the
updated local register to the stack before doing a Cmm call, resulting
in completely invalid runtime behavior.

The patch also adds a `T27447` regression test. With no-TNTC or with
LLVM backend, without the fix the test case would output a stale
0x1111111111111111 value, instead of the expected 0x2222222222222222
output.

Fixes #27447.

Co-authored-by: Codex <codex@openai.com>

- - - - -
0880c57f by Duncan Coutts at 2026-07-01T10:46:59+01:00
Eliminate STM_AWOKEN

It was used as nullary closure for the block_info.closure in the case of
a thread being awoken after an STM transaction.

However, while it was written, it was never read, so contributed nothing
to the behaviour. Furthermore, in the only place it was set (in
tryWakeupThread) the why_blocked was immediately overwritten by the
NotBlocked status, and the block_info was updated accordingly (by
appendToRunQueue).

So it didn't even serve a purpose of clarifying an intermediate state,
there really was no such intermediate state.

Cleaning this up will allow the BlockedOnSTM case to follow the same
pattern as the other why_blocked cases that do not use the block_info,
and in turn this reduces the number of different categories.

- - - - -
9bb7b2e5 by Duncan Coutts at 2026-07-01T10:47:00+01:00
Document that eventlog thread stop code ThreadBlocked is no longer used

It has not been used since GHC 7.0.x (2011). In 7.2 all the BlockedOn*
codes were added, and these were and are used instead of ThreadBlocked.

- - - - -
1b9d06b5 by Duncan Coutts at 2026-07-01T10:47:00+01:00
Add a proper mapping to eventlog external thread stop status

That is the mapping from rts-internal codes, to the coes used in the
status field in the eventlog EVENT_STOP_THREAD event.

See issue #9003 for what goes wrong when we mess this up. In that
ticket, people note that we should really not require the internal
tso->why_blocked codes to leak into the external eventlog thread stop
codes. The same principle applies to the StgThreadReturnCode.

This change properly separates them, and explicitly maps between them
using a pair of (compact, constant) tables. These tables are pretty
small (with no alignment constraints) and will soon shrink so it seems
a sensible tradeoff.

We also introduce and use proper EVENT_STOP_THREAD constants in the
event log format header. Previously there was not specification in the
code for these (only in the docs): the values were encoded into the
conversion code.

This will allow us to renumber the internal why_blockd codes without
breaking the eventlog output.

- - - - -
6ed73317 by Duncan Coutts at 2026-07-01T10:47:00+01:00
Remove unused tso->block_info.wakeup member.

Presumably it was used once, but not now.

- - - - -
7cf31052 by Duncan Coutts at 2026-07-01T10:47:00+01:00
Document StgTSOBlockInfo to say what cases use what members

In principle, tso->why_blocked is the tag for the StgTSOBlockInfo union,
so we should be able to say for each union member the why_blocked cases
that use that member.

- - - - -
d28862dc by Duncan Coutts at 2026-07-01T10:47:00+01:00
Add a tso->block_info.mvar member and use it

in preference to the generic block_info.closure union member, with
casts.

The plan is that when we know what case we're in (via tso->why_blocked)
then we can always access the correct union member, and so we will only
need to access block_info.closure for generic cases where we don't know
or don't care.

- - - - -
bbc8bb77 by Duncan Coutts at 2026-07-01T10:47:00+01:00
Add a tso->block_info.unused member and use it

in preference to the generic block_info.closure union member, with
casts.

The plan is that when we know what case we're in (via tso->why_blocked)
then we can always access the correct union member, and so we will only
need to access block_info.closure for generic cases where we don't know
or don't care.

- - - - -
c265dc6d by Duncan Coutts at 2026-07-01T10:47:00+01:00
Avoid storing to tso->block_info.closure

In one case we can use a specific union member (.prev) instead. In
several cases the stores were in fact redundant because of subsequent
overwrites.

In scavengeTSO we replace setting tso->block_info.closure to a valid
closure, with an assertion that the block_info.unused is already set to
END_TSO_QUEUE which is a valid (static) closure.

- - - - -
5c9efdd8 by Duncan Coutts at 2026-07-01T10:47:00+01:00
Renumber the tso->why_blocked constants

We can do this now because we have separated the internal values from
the external ones used in the eventlog.

This lets us put them back into a deliberate order and consolodate some
gaps.

More importantly, it is a prepation for a slightly more sophisticated
encoding.

- - - - -
c29120d9 by Duncan Coutts at 2026-07-01T10:47:00+01:00
Define constants for the existing stg_threadStatuszh return codes

The stg_threadStatuszh reuses the internal tso->why_blocked codes but
also extends them with a couple previously magic values. This is awkward
since we need to know what those magic values are so we don't
accidentally use those values to mean something else. By pulling a
definition up to where the why_blocked codes are defined we will be able
to avoid mistakenly assining those codes some meaning (or just changing
the BlockedThreadComplete, BlockedThreadKilled code if necessary).

- - - - -
337a2236 by Duncan Coutts at 2026-07-01T10:47:00+01:00
Extend the tso->why_blocked encoding to indicate block_info closures

We use some bit tricks to cheaply and generically test if a
tso->why_blocked tag implies that the corresponding tso->block_info will
contain a non-trivial valid closure (i.e. not just block_info.unused set
to END_TSO_QUEUE).

In particular we arrange for most why_blocked values to naturally have a
distinguishing bit, but for the BlockedOn{Read,Write,Delay} cases, they
can come in either non-closure or closure forms. We allow an additional
bit to distinguish these cases. The non-closure forms are only from
legacy I/O managers: select and win32-legacy. So this extra bit
mechanism will be able to be retired once the legacy I/O managers are
themselves retired.

This means in a few places we need to untag the why_blocked value before
inspecting it, but in most places we do not.

- - - - -
64b4fa2a by Duncan Coutts at 2026-07-01T10:47:00+01:00
Use BlockInfoForceNonClosure in the select I/O manager

- - - - -
95864f75 by Duncan Coutts at 2026-07-01T10:47:00+01:00
Use BlockInfoForceNonClosure in the win32-legacy I/O manager

for the BlockedOn{Read,Write} since these use the non-heap allocated
StgAsyncIOResult.

- - - - -
35c83271 by Duncan Coutts at 2026-07-01T10:47:00+01:00
Enforce the why_blocked and block_info rules in checkTSO

We now check the cases wher IsBlockInfoClosure should hold, the cases
that are supposed to use block_info.unused == END_TSO_QUEUE, and which
cases are allowed to use BlockInfoForceNonClosure.

This partially enforces the use of why_blocked as a tag for the
block_info union. We could be stricter and check for the correct
expected info table for the closure cases.

- - - - -
8bcc9975 by Duncan Coutts at 2026-07-01T10:47:00+01:00
Use IsBlockInfoClosure to simplify several tests

In GC and generic traversal we need to know if we should look at the
block_info.closure or not. Now we can do just that using a cheap bit
test on the why_blocked tag.

This fixes issue 26717, where the problem was that some GC modes did not
know when to look at block_info.closure, because the poll I/O manager
uses a closure for BlockedOn{Read,Write} while the select I/O manager
uses a non-closure. Now this information is in the why_blocked tag
itself.

- - - - -
375d01be by Duncan Coutts at 2026-07-01T10:47:00+01:00
Remove the now-unused scavengeTSOIOManager

The GC no longer has to delegate to the I/O manager, since it can use
IsBlockInfoClosure to decide things itself.

- - - - -
c286ac1e by Duncan Coutts at 2026-07-01T10:47:00+01:00
Remove duplicate assertion

- - - - -
150e78ec by Duncan Coutts at 2026-07-01T10:47:00+01:00
Follow atomic access rules more consistently for tso->why_blocked

The rule is this:

store block_info *before* why_blocked
store why_blocked using store release

load why_blocked using load acquire
load block_info *after* why_blocked

This is a an atomic store release / load acquire pair and (if the reads
are in a separate thread to the writes, and the read receives the value
stored) then this guarantees a full "happens before" relationship of
these stores and loads.

In some cases, we do not need a full load acquire, because we don't read
the block_info at all and so do not need any ordering. In this case we
just need an atomic relaxed load.

This was being followed in most places, but not all. If there's good
reason in any case that we don't need atomic access, then we should
document that in a comment. In the absence of that I think it's easier
to follow the rule everywhere.

- - - - -
613756e4 by Duncan Coutts at 2026-07-01T10:47:00+01:00
Add a changelog entry

- - - - -

926 changed files:

- .gitlab-ci.yml
- .gitlab/ci.sh
- .gitlab/generate-ci/gen_ci.hs
- .gitlab/jobs.yaml
- .gitmodules
- boot
- + changelog.d/26616
- + changelog.d/AbstractQ
- + changelog.d/T17833
- + changelog.d/T21176
- + changelog.d/T26716
- + changelog.d/T26978
- + changelog.d/T26979
- + changelog.d/T27022
- + changelog.d/T27046
- + changelog.d/T27047
- + changelog.d/T27182.md
- + changelog.d/T27202
- + changelog.d/T27225
- + changelog.d/T27261
- + changelog.d/T27308
- + changelog.d/T27317
- + changelog.d/T27359
- + changelog.d/T27386
- + changelog.d/add_can_drop_to_occurence_analyser
- + changelog.d/bump-process
- changelog.d/config
- + changelog.d/deterministic-usage-order
- + changelog.d/dynamic-trace-flags
- + changelog.d/elem-via-foldr-27096
- + changelog.d/fix-blackhole-handling
- + changelog.d/fix-compacting-gc-ap-27434
- + changelog.d/fix-exponential-case-desugar-27383
- + changelog.d/fix-layout-stack-fcall
- + changelog.d/fix-plugin-finder-multi-home-unit.md
- + changelog.d/fix-unreg
- + changelog.d/generically-mconcat
- + changelog.d/ghc-api-epa-parens
- + changelog.d/ghc-pkg-faster-closure
- changelog.d/hadrian-response-files.md
- + changelog.d/hadrian-stale-package-confs-26661
- + changelog.d/hadrian-system-cxx-std-lib-25303
- + changelog.d/interactive-error-hints
- + changelog.d/ipe-event-class
- + changelog.d/jobserver-leak-fix
- + changelog.d/lib-add-tuple-tyfam-27179
- + changelog.d/libdir-setting
- + changelog.d/module-graph-reuse-in-downsweep
- + changelog.d/more-efficient-home-unit-imports-finding
- + changelog.d/no-more-timer-signal
- + changelog.d/pp-set-ghc-version
- + changelog.d/reexported-module-errors
- + changelog.d/remove-bignum-check-backend
- + changelog.d/remove-bignum-ffi-backend
- + changelog.d/remove-ddump-json-flag
- + changelog.d/rts_symlinks.md
- + changelog.d/semaphore-v2
- + changelog.d/so_inline_is_a_predicate
- + changelog.d/stable-core-dump-order-27296
- + changelog.d/stage2-cross-compilers
- + changelog.d/tag-inference-27005
- + changelog.d/tool-messages-27370
- + changelog.d/unused-type
- + changelog.d/wasm-fix-serviceworker
- + changelog.d/windows-rethrow-overlapped-exception
- compiler/.hlint.yaml
- compiler/GHC/Builtin/Names.hs
- compiler/GHC/Builtin/Types.hs
- compiler/GHC/Builtin/Utils.hs
- compiler/GHC/Builtin/primops.txt.pp
- compiler/GHC/Cmm/LayoutStack.hs
- compiler/GHC/CmmToAsm/AArch64/CodeGen.hs
- compiler/GHC/CmmToAsm/AArch64/Instr.hs
- compiler/GHC/CmmToAsm/AArch64/Ppr.hs
- compiler/GHC/CmmToAsm/BlockLayout.hs
- compiler/GHC/CmmToAsm/RV64/CodeGen.hs
- compiler/GHC/CmmToAsm/RV64/Instr.hs
- compiler/GHC/CmmToAsm/RV64/Ppr.hs
- compiler/GHC/CmmToAsm/RV64/Regs.hs
- compiler/GHC/CmmToAsm/Reg/Linear.hs
- compiler/GHC/CmmToAsm/Reg/Linear/FreeRegs.hs
- compiler/GHC/CmmToAsm/Reg/Linear/JoinToTargets.hs
- compiler/GHC/CmmToAsm/Reg/Linear/X86.hs
- compiler/GHC/CmmToAsm/Reg/Linear/X86_64.hs
- compiler/GHC/CmmToAsm/X86/RegInfo.hs
- compiler/GHC/CmmToAsm/X86/Regs.hs
- compiler/GHC/CmmToLlvm/Base.hs
- compiler/GHC/Core.hs
- compiler/GHC/Core/Coercion.hs
- compiler/GHC/Core/Coercion/Opt.hs
- compiler/GHC/Core/Lint.hs
- compiler/GHC/Core/Make.hs
- compiler/GHC/Core/Opt/Arity.hs
- compiler/GHC/Core/Opt/ConstantFold.hs
- compiler/GHC/Core/Opt/FloatIn.hs
- compiler/GHC/Core/Opt/FloatOut.hs
- compiler/GHC/Core/Opt/Monad.hs
- compiler/GHC/Core/Opt/OccurAnal.hs
- compiler/GHC/Core/Opt/Simplify.hs
- compiler/GHC/Core/Opt/Simplify/Env.hs
- compiler/GHC/Core/Opt/Simplify/Iteration.hs
- compiler/GHC/Core/Opt/Simplify/Utils.hs
- compiler/GHC/Core/Opt/SpecConstr.hs
- compiler/GHC/Core/Opt/Specialise.hs
- compiler/GHC/Core/Ppr.hs
- compiler/GHC/Core/Rules.hs
- compiler/GHC/Core/SimpleOpt.hs
- compiler/GHC/Core/TyCo/Subst.hs
- compiler/GHC/Core/Type.hs
- compiler/GHC/Core/Utils.hs
- compiler/GHC/CoreToStg/Prep.hs
- compiler/GHC/Data/BooleanFormula.hs
- compiler/GHC/Data/IOEnv.hs
- compiler/GHC/Data/List/NonEmpty.hs
- compiler/GHC/Data/List/SetOps.hs
- compiler/GHC/Driver/Backend.hs
- compiler/GHC/Driver/Backpack.hs
- compiler/GHC/Driver/Config.hs
- compiler/GHC/Driver/Config/Core/Lint.hs
- compiler/GHC/Driver/Config/Interpreter.hs
- compiler/GHC/Driver/Downsweep.hs
- compiler/GHC/Driver/DynFlags.hs
- compiler/GHC/Driver/Errors.hs
- compiler/GHC/Driver/Errors/Ppr.hs
- compiler/GHC/Driver/Errors/Types.hs
- compiler/GHC/Driver/Flags.hs
- compiler/GHC/Driver/Main/Interactive.hs
- compiler/GHC/Driver/Main/Passes.hs
- compiler/GHC/Driver/Main/Passes.hs-boot
- compiler/GHC/Driver/Make.hs
- compiler/GHC/Driver/MakeAction.hs
- compiler/GHC/Driver/MakeSem.hs
- compiler/GHC/Driver/Pipeline.hs
- compiler/GHC/Driver/Session.hs
- compiler/GHC/Driver/Session/Units.hs
- compiler/GHC/Hs.hs
- compiler/GHC/Hs/Binds.hs
- compiler/GHC/Hs/Decls.hs
- compiler/GHC/Hs/DocString.hs
- compiler/GHC/Hs/Dump.hs
- compiler/GHC/Hs/Expr.hs
- compiler/GHC/Hs/ImpExp.hs
- compiler/GHC/Hs/Instances.hs
- compiler/GHC/Hs/Lit.hs
- compiler/GHC/Hs/Pat.hs
- compiler/GHC/Hs/Stats.hs
- compiler/GHC/Hs/Type.hs
- compiler/GHC/Hs/Utils.hs
- compiler/GHC/HsToCore/Arrows.hs
- compiler/GHC/HsToCore/Docs.hs
- compiler/GHC/HsToCore/Errors/Ppr.hs
- compiler/GHC/HsToCore/Errors/Types.hs
- compiler/GHC/HsToCore/Expr.hs
- compiler/GHC/HsToCore/Foreign/JavaScript.hs
- compiler/GHC/HsToCore/Match.hs
- compiler/GHC/HsToCore/Match.hs-boot
- compiler/GHC/HsToCore/Match/Constructor.hs
- compiler/GHC/HsToCore/Match/Literal.hs
- compiler/GHC/HsToCore/Monad.hs
- compiler/GHC/HsToCore/Pmc.hs
- compiler/GHC/HsToCore/Pmc/Desugar.hs
- compiler/GHC/HsToCore/Pmc/Solver.hs
- compiler/GHC/HsToCore/Pmc/Solver/Types.hs
- compiler/GHC/HsToCore/Quote.hs
- compiler/GHC/HsToCore/Ticks.hs
- compiler/GHC/HsToCore/Usage.hs
- compiler/GHC/Iface/Binary.hs
- compiler/GHC/Iface/Errors.hs
- compiler/GHC/Iface/Errors/Ppr.hs
- compiler/GHC/Iface/Errors/Types.hs
- compiler/GHC/Iface/Ext/Ast.hs
- compiler/GHC/Iface/Load.hs
- compiler/GHC/Iface/Recomp.hs
- compiler/GHC/Iface/Syntax.hs
- compiler/GHC/Iface/Type.hs
- compiler/GHC/Iface/Warnings.hs
- compiler/GHC/IfaceToCore.hs
- compiler/GHC/Linker/Unit.hs
- compiler/GHC/Parser.y
- compiler/GHC/Parser/Annotation.hs
- compiler/GHC/Parser/Errors/Ppr.hs
- compiler/GHC/Parser/Errors/Types.hs
- compiler/GHC/Parser/HaddockLex.x
- compiler/GHC/Parser/Lexer.x
- compiler/GHC/Parser/PostProcess.hs
- compiler/GHC/Parser/PostProcess/Haddock.hs
- compiler/GHC/Parser/Types.hs
- compiler/GHC/Rename/Bind.hs
- compiler/GHC/Rename/Env.hs
- compiler/GHC/Rename/Expr.hs
- compiler/GHC/Rename/HsType.hs
- compiler/GHC/Rename/Lit.hs
- compiler/GHC/Rename/Module.hs
- compiler/GHC/Rename/Names.hs
- compiler/GHC/Rename/Pat.hs
- compiler/GHC/Rename/Splice.hs
- compiler/GHC/Rename/Splice.hs-boot
- compiler/GHC/Rename/Unbound.hs
- compiler/GHC/Rename/Utils.hs
- compiler/GHC/Runtime/Debugger/Breakpoints.hs
- compiler/GHC/Runtime/Eval/Types.hs
- compiler/GHC/Runtime/Heap/Inspect.hs
- compiler/GHC/Settings.hs
- compiler/GHC/Settings/Constants.hs
- compiler/GHC/Settings/IO.hs
- compiler/GHC/Stg/EnforceEpt.hs
- compiler/GHC/Stg/EnforceEpt/Rewrite.hs
- compiler/GHC/Stg/EnforceEpt/TagSig.hs
- compiler/GHC/Stg/EnforceEpt/Types.hs
- compiler/GHC/Stg/Pipeline.hs
- compiler/GHC/StgToJS/Ids.hs
- compiler/GHC/SysTools/Cpp.hs
- compiler/GHC/SysTools/Process.hs
- compiler/GHC/SysTools/Tasks.hs
- compiler/GHC/SysTools/Terminal.hs
- compiler/GHC/Tc/Deriv.hs
- compiler/GHC/Tc/Deriv/Generate.hs
- compiler/GHC/Tc/Errors.hs
- compiler/GHC/Tc/Errors/Ppr.hs
- compiler/GHC/Tc/Errors/Types.hs
- compiler/GHC/Tc/Gen/App.hs
- compiler/GHC/Tc/Gen/Bind.hs
- compiler/GHC/Tc/Gen/Export.hs
- compiler/GHC/Tc/Gen/Head.hs
- compiler/GHC/Tc/Gen/HsType.hs
- compiler/GHC/Tc/Gen/Match.hs
- compiler/GHC/Tc/Gen/Pat.hs
- compiler/GHC/Tc/Gen/Sig.hs
- compiler/GHC/Tc/Gen/Splice.hs
- compiler/GHC/Tc/Gen/Splice.hs-boot
- compiler/GHC/Tc/Module.hs
- compiler/GHC/Tc/Solver/Equality.hs
- compiler/GHC/Tc/Solver/FunDeps.hs
- compiler/GHC/Tc/TyCl.hs
- compiler/GHC/Tc/TyCl/PatSyn.hs
- compiler/GHC/Tc/TyCl/Utils.hs
- compiler/GHC/Tc/Types.hs
- compiler/GHC/Tc/Types/Evidence.hs
- compiler/GHC/Tc/Utils/Backpack.hs
- compiler/GHC/Tc/Utils/Env.hs
- compiler/GHC/Tc/Utils/Instantiate.hs
- compiler/GHC/Tc/Utils/Monad.hs
- compiler/GHC/Tc/Utils/TcMType.hs
- compiler/GHC/Tc/Utils/TcType.hs
- compiler/GHC/Tc/Utils/Unify.hs
- compiler/GHC/Tc/Zonk/Type.hs
- compiler/GHC/ThToHs.hs
- compiler/GHC/Types/Error.hs
- − compiler/GHC/Types/Error.hs-boot
- compiler/GHC/Types/Error/Codes.hs
- compiler/GHC/Types/Hint.hs
- compiler/GHC/Types/Hint/Ppr.hs
- compiler/GHC/Types/Id/Make.hs
- compiler/GHC/Types/Name/Cache.hs
- compiler/GHC/Types/Name/Reader.hs
- compiler/GHC/Types/PkgQual.hs
- compiler/GHC/Types/RepType.hs
- compiler/GHC/Types/SourceError.hs
- compiler/GHC/Types/SourceText.hs
- compiler/GHC/Types/Unique.hs
- compiler/GHC/Types/Unique/Supply.hs
- compiler/GHC/Unit.hs
- compiler/GHC/Unit/Finder.hs
- compiler/GHC/Unit/Finder/Types.hs
- compiler/GHC/Unit/Info.hs
- compiler/GHC/Unit/Module/Deps.hs
- compiler/GHC/Unit/Module/Env.hs
- compiler/GHC/Unit/Module/Graph.hs
- compiler/GHC/Unit/Module/Warnings.hs
- compiler/GHC/Unit/State.hs
- compiler/GHC/Unit/Types.hs
- compiler/GHC/Utils/Error.hs
- compiler/GHC/Utils/Logger.hs
- compiler/GHC/Utils/Misc.hs
- compiler/GHC/Utils/Outputable.hs
- compiler/Language/Haskell/Syntax.hs
- compiler/Language/Haskell/Syntax/Binds.hs
- compiler/Language/Haskell/Syntax/Binds/InlinePragma.hs
- compiler/Language/Haskell/Syntax/Decls.hs
- compiler/Language/Haskell/Syntax/Decls/Foreign.hs
- compiler/Language/Haskell/Syntax/Expr.hs
- compiler/Language/Haskell/Syntax/Extension.hs
- compiler/Language/Haskell/Syntax/ImpExp.hs
- compiler/Language/Haskell/Syntax/Lit.hs
- compiler/Language/Haskell/Syntax/Pat.hs
- compiler/Language/Haskell/Syntax/Type.hs
- configure.ac
- distrib/configure.ac.in
- docs/users_guide/bugs.rst
- docs/users_guide/debugging.rst
- docs/users_guide/eventlog-formats.rst
- docs/users_guide/exts/stolen_syntax.rst
- docs/users_guide/exts/template_haskell.rst
- docs/users_guide/ghci.rst
- docs/users_guide/javascript.rst
- docs/users_guide/phases.rst
- docs/users_guide/profiling.rst
- docs/users_guide/runtime_control.rst
- docs/users_guide/using-warnings.rst
- docs/users_guide/using.rst
- ghc/GHCi/UI.hs
- ghc/GHCi/UI/Exception.hs
- ghc/Main.hs
- hadrian/README.md
- hadrian/bindist/config.mk.in
- hadrian/build-cabal
- hadrian/cfg/default.host.target.in
- hadrian/cfg/default.target.in
- + hadrian/cfg/system.config.host.in
- hadrian/cfg/system.config.in
- + hadrian/cfg/system.config.target.in
- hadrian/doc/user-settings.md
- hadrian/hadrian.cabal
- hadrian/src/Base.hs
- + hadrian/src/BindistConfig.hs
- hadrian/src/Builder.hs
- hadrian/src/CommandLine.hs
- hadrian/src/Context.hs
- hadrian/src/Expression.hs
- hadrian/src/Flavour.hs
- hadrian/src/Flavour/Type.hs
- hadrian/src/Hadrian/Builder.hs
- hadrian/src/Hadrian/Builder/Ar.hs
- hadrian/src/Hadrian/Haskell/Cabal/Parse.hs
- hadrian/src/Hadrian/Haskell/Cabal/Type.hs
- hadrian/src/Hadrian/Haskell/Hash.hs
- hadrian/src/Hadrian/Oracles/Path.hs
- hadrian/src/Hadrian/Oracles/TextFile.hs
- hadrian/src/Hadrian/Utilities.hs
- hadrian/src/Main.hs
- hadrian/src/Oracles/Flag.hs
- hadrian/src/Oracles/Flavour.hs
- hadrian/src/Oracles/Setting.hs
- hadrian/src/Oracles/TestSettings.hs
- hadrian/src/Packages.hs
- hadrian/src/Rules.hs
- hadrian/src/Rules/BinaryDist.hs
- hadrian/src/Rules/CabalReinstall.hs
- hadrian/src/Rules/Changelog.hs
- hadrian/src/Rules/Compile.hs
- hadrian/src/Rules/Documentation.hs
- hadrian/src/Rules/Generate.hs
- hadrian/src/Rules/Gmp.hs
- hadrian/src/Rules/Library.hs
- hadrian/src/Rules/Program.hs
- hadrian/src/Rules/Register.hs
- hadrian/src/Rules/Rts.hs
- hadrian/src/Rules/Test.hs
- hadrian/src/Settings.hs
- hadrian/src/Settings/Builders/Cabal.hs
- hadrian/src/Settings/Builders/Common.hs
- hadrian/src/Settings/Builders/Configure.hs
- hadrian/src/Settings/Builders/DeriveConstants.hs
- hadrian/src/Settings/Builders/Ghc.hs
- hadrian/src/Settings/Builders/Hsc2Hs.hs
- hadrian/src/Settings/Builders/RunTest.hs
- hadrian/src/Settings/Builders/SplitSections.hs
- hadrian/src/Settings/Default.hs
- hadrian/src/Settings/Flavours/GhcInGhci.hs
- hadrian/src/Settings/Flavours/Performance.hs
- hadrian/src/Settings/Flavours/QuickCross.hs
- hadrian/src/Settings/Packages.hs
- hadrian/src/Settings/Program.hs
- hadrian/src/Settings/Warnings.hs
- libraries/base/base.cabal.in
- libraries/base/changelog.md
- libraries/base/src/Control/Applicative.hs
- libraries/base/src/Control/Arrow.hs
- libraries/base/src/Control/Exception.hs
- libraries/base/src/Control/Monad.hs
- libraries/base/src/Control/Monad/IO/Class.hs
- libraries/base/src/Data/Array/Byte.hs
- libraries/base/src/Data/Data.hs
- + libraries/base/src/Data/Double.hs
- libraries/base/src/Data/Fixed.hs
- + libraries/base/src/Data/Float.hs
- libraries/base/src/Data/Functor/Classes.hs
- libraries/base/src/Data/Functor/Compose.hs
- libraries/base/src/Data/List/NonEmpty.hs
- libraries/base/src/Data/Version.hs
- libraries/base/src/GHC/Base.hs
- libraries/base/src/GHC/ByteOrder.hs
- libraries/base/src/GHC/Conc.hs
- libraries/base/src/GHC/Conc/Sync.hs
- libraries/base/src/GHC/Exts.hs
- libraries/base/src/GHC/Fingerprint.hs
- libraries/base/src/GHC/IO/Handle.hs
- libraries/base/src/GHC/RTS/Flags.hs
- libraries/base/src/GHC/Unicode.hs
- libraries/base/src/GHC/Weak.hs
- libraries/base/src/GHC/Weak/Finalize.hs
- libraries/base/src/Numeric.hs
- libraries/base/src/Prelude.hs
- libraries/base/src/System/IO.hs
- libraries/base/src/System/Mem/Weak.hs
- libraries/base/src/System/Timeout.hs
- libraries/base/src/Text/Read.hs
- libraries/base/tests/all.T
- libraries/base/tests/perf/ElemNoFusion_O1.stderr
- libraries/base/tests/perf/ElemNoFusion_O2.stderr
- libraries/ghc-bignum/changelog.md
- libraries/ghc-bignum/ghc-bignum.cabal
- + libraries/ghc-boot/GHC/Data/ShortByteString.hs
- libraries/ghc-boot/GHC/Settings/Utils.hs
- libraries/ghc-boot/ghc-boot.cabal.in
- libraries/ghc-experimental/src/Data/Sum/Experimental.hs
- libraries/ghc-experimental/src/Data/Tuple/Experimental.hs
- libraries/ghc-experimental/src/GHC/PrimOps.hs
- libraries/ghc-internal/bignum-backend.rst
- libraries/ghc-internal/ghc-internal.cabal.in
- libraries/ghc-internal/src/GHC/Internal/Base.hs
- libraries/ghc-internal/src/GHC/Internal/Bignum/Backend.hs
- − libraries/ghc-internal/src/GHC/Internal/Bignum/Backend/Check.hs
- − libraries/ghc-internal/src/GHC/Internal/Bignum/Backend/FFI.hs
- libraries/ghc-internal/src/GHC/Internal/Bignum/Backend/Native.hs
- − libraries/ghc-internal/src/GHC/Internal/Bignum/Backend/Selected.hs
- libraries/ghc-internal/src/GHC/Internal/Bignum/Integer.hs
- libraries/ghc-internal/src/GHC/Internal/Bits.hs
- libraries/ghc-internal/src/GHC/Internal/Conc/Sync.hs
- libraries/ghc-internal/src/GHC/Internal/Event/Windows.hsc
- libraries/ghc-internal/src/GHC/Internal/Exts.hs
- libraries/ghc-internal/src/GHC/Internal/Float.hs
- libraries/ghc-internal/src/GHC/Internal/Generics.hs
- libraries/ghc-internal/src/GHC/Internal/IO/Encoding.hs
- libraries/ghc-internal/src/GHC/Internal/Lexeme.hs
- libraries/ghc-internal/src/GHC/Internal/List.hs
- libraries/ghc-internal/src/GHC/Internal/Natural.hs
- libraries/ghc-internal/src/GHC/Internal/RTS/Flags.hsc
- libraries/ghc-internal/src/GHC/Internal/TH/Lib.hs
- libraries/ghc-internal/src/GHC/Internal/TH/Monad.hs
- − libraries/ghc-internal/src/GHC/Internal/Text/Read.hs
- libraries/ghc-internal/src/GHC/Internal/Types.hs
- libraries/ghci/GHCi/Coverage.hs
- libraries/ghci/GHCi/Run.hs
- libraries/ghci/GHCi/TH.hs
- libraries/process
- libraries/semaphore-compat
- libraries/template-haskell/Language/Haskell/TH/Syntax.hs
- libraries/xhtml
- m4/find_llvm_prog.m4
- m4/fp_find_nm.m4
- m4/fp_setup_windows_toolchain.m4
- m4/ghc_toolchain.m4
- m4/prep_target_file.m4
- rts/.gitignore
- rts/Capability.c
- rts/IOManager.c
- rts/IOManager.h
- rts/IPE.c
- rts/Linker.c
- rts/LinkerInternals.h
- rts/Messages.c
- rts/PrimOps.cmm
- rts/RaiseAsync.c
- rts/RaiseAsync.h
- rts/RtsFlags.c
- rts/RtsSymbols.c
- rts/RtsSymbols.h
- rts/STM.c
- rts/Schedule.c
- rts/StgMiscClosures.cmm
- rts/ThreadPaused.c
- rts/Threads.c
- rts/Timer.c
- rts/Trace.c
- rts/Trace.h
- rts/TraverseHeap.c
- rts/Updates.h
- rts/eventlog/EventLog.c
- rts/eventlog/EventLog.h
- rts/include/Cmm.h
- rts/include/rts/Constants.h
- rts/include/rts/EventLogFormat.h
- rts/include/rts/EventLogWriter.h
- rts/include/rts/Flags.h
- rts/include/rts/NonMoving.h
- rts/include/rts/OSThreads.h
- rts/include/rts/storage/ClosureMacros.h
- rts/include/rts/storage/TSO.h
- rts/include/stg/MiscClosures.h
- rts/linker/Elf.c
- + rts/posix/FdWakeup.c
- + rts/posix/FdWakeup.h
- rts/posix/Poll.c
- rts/posix/Select.c
- rts/posix/Ticker.c
- rts/posix/Timeout.c
- − rts/posix/ticker/Pthread.c
- − rts/posix/ticker/TimerFd.c
- rts/rts.cabal
- rts/sm/BlockAlloc.c
- rts/sm/Compact.c
- rts/sm/Evac.h
- rts/sm/MBlock.c
- rts/sm/NonMoving.c
- rts/sm/NonMovingMark.c
- rts/sm/Sanity.c
- rts/sm/Scav.c
- rts/win32/AsyncMIO.c
- + rts/win32/libHSghc-internal.def.in
- testsuite/driver/junit.py
- testsuite/driver/runtests.py
- testsuite/driver/testlib.py
- testsuite/ghc-config/ghc-config.hs
- testsuite/mk/test.mk
- testsuite/tests/MiniQuickCheck.hs
- testsuite/tests/annotations/should_fail/annfail03.stderr
- testsuite/tests/annotations/should_fail/annfail04.stderr
- testsuite/tests/annotations/should_fail/annfail06.stderr
- testsuite/tests/annotations/should_fail/annfail09.stderr
- + testsuite/tests/cmm/should_run/T27447.hs
- + testsuite/tests/cmm/should_run/T27447.stdout
- + testsuite/tests/cmm/should_run/T27447_cmm.cmm
- testsuite/tests/cmm/should_run/all.T
- testsuite/tests/codeGen/should_compile/T25177.stderr
- + testsuite/tests/codeGen/should_gen_asm/aarch64-shl-subword.asm
- + testsuite/tests/codeGen/should_gen_asm/aarch64-shl-subword.hs
- + testsuite/tests/codeGen/should_gen_asm/aarch64-sxth-mul2.asm
- + testsuite/tests/codeGen/should_gen_asm/aarch64-sxth-mul2.cmm
- + testsuite/tests/codeGen/should_gen_asm/aarch64-sxtw.asm
- + testsuite/tests/codeGen/should_gen_asm/aarch64-sxtw.cmm
- + testsuite/tests/codeGen/should_gen_asm/aarch64-ushr-subword.asm
- + testsuite/tests/codeGen/should_gen_asm/aarch64-ushr-subword.hs
- testsuite/tests/codeGen/should_gen_asm/all.T
- testsuite/tests/codeGen/should_run/T16617.hs
- testsuite/tests/codeGen/should_run/T16617.stdout
- + testsuite/tests/codeGen/should_run/T27046.hs
- + testsuite/tests/codeGen/should_run/T27046_cmm.cmm
- + testsuite/tests/codeGen/should_run/aarch64-subword-ops.hs
- + testsuite/tests/codeGen/should_run/aarch64-subword-ops.stdout
- + testsuite/tests/codeGen/should_run/aarch64-sxtw-cmm.cmm
- + testsuite/tests/codeGen/should_run/aarch64-sxtw-run.hs
- + testsuite/tests/codeGen/should_run/aarch64-sxtw-run.stdout
- + testsuite/tests/codeGen/should_run/aarch64-ushr-subword-run.hs
- + testsuite/tests/codeGen/should_run/aarch64-ushr-subword-run.stdout
- testsuite/tests/codeGen/should_run/all.T
- testsuite/tests/core-to-stg/T14895.stderr
- testsuite/tests/count-deps/CountDepsAst.stdout
- testsuite/tests/count-deps/CountDepsParser.stdout
- testsuite/tests/deSugar/should_compile/T13208.stdout
- + testsuite/tests/deSugar/should_compile/T27383.hs
- testsuite/tests/deSugar/should_compile/all.T
- testsuite/tests/diagnostic-codes/codes.stdout
- testsuite/tests/driver/T16167.stderr
- − testsuite/tests/driver/T16167.stdout
- + testsuite/tests/driver/T27370/Makefile
- + testsuite/tests/driver/T27370/T27370.hs
- + testsuite/tests/driver/T27370/T27370.pp
- + testsuite/tests/driver/T27370/T27370.stderr
- + testsuite/tests/driver/T27370/all.T
- testsuite/tests/driver/all.T
- testsuite/tests/driver/fat-iface/fat014.stdout
- testsuite/tests/driver/json2.stderr
- − testsuite/tests/driver/json_dump.hs
- − testsuite/tests/driver/json_dump.stderr
- + testsuite/tests/driver/multipleHomeUnits/plugin01/all.T
- + testsuite/tests/driver/multipleHomeUnits/plugin01/appunit
- + testsuite/tests/driver/multipleHomeUnits/plugin01/p/MyPlugin.hs
- + testsuite/tests/driver/multipleHomeUnits/plugin01/pluginunit
- + testsuite/tests/driver/multipleHomeUnits/plugin01/q/App.hs
- + testsuite/tests/driver/multipleHomeUnits/plugin02/all.T
- + testsuite/tests/driver/multipleHomeUnits/plugin02/appunit
- + testsuite/tests/driver/multipleHomeUnits/plugin02/p/MyPlugin.hs
- + testsuite/tests/driver/multipleHomeUnits/plugin02/pluginunit
- + testsuite/tests/driver/multipleHomeUnits/plugin02/q/App.hs
- + testsuite/tests/driver/multipleHomeUnits/plugin02/r/RexLib.hs
- + testsuite/tests/driver/multipleHomeUnits/plugin02/reexportunit
- testsuite/tests/ffi/should_run/all.T
- + testsuite/tests/generics/T27245.hs
- + testsuite/tests/generics/T27245.stdout
- testsuite/tests/generics/all.T
- + testsuite/tests/ghc-api/T24386.hs
- testsuite/tests/ghc-api/T25121_status.stdout
- + testsuite/tests/ghc-api/T27240.hs
- + testsuite/tests/ghc-api/T27273.hs
- testsuite/tests/ghc-api/all.T
- testsuite/tests/ghc-api/annotations-literals/literals.stdout
- testsuite/tests/ghc-api/annotations-literals/parsed.hs
- + testsuite/tests/ghc-api/downsweep/IncrementalDownsweep.hs
- + testsuite/tests/ghc-api/downsweep/IncrementalDownsweep.modules/A.hs
- + testsuite/tests/ghc-api/downsweep/IncrementalDownsweep.modules/B.hs
- + testsuite/tests/ghc-api/downsweep/IncrementalDownsweep.modules/C.hs
- + testsuite/tests/ghc-api/downsweep/IncrementalDownsweep.modules/D.hs
- + testsuite/tests/ghc-api/downsweep/IncrementalDownsweep.modules/X.hs
- + testsuite/tests/ghc-api/downsweep/IncrementalDownsweep.modules/Y.hs
- + testsuite/tests/ghc-api/downsweep/IncrementalDownsweep.modules/Z.hs
- + testsuite/tests/ghc-api/downsweep/IncrementalDownsweep.stdout
- testsuite/tests/ghc-api/downsweep/OldModLocation.hs
- testsuite/tests/ghc-api/downsweep/PartialDownsweep.hs
- testsuite/tests/ghc-api/downsweep/all.T
- testsuite/tests/ghc-api/exactprint/T22919.stderr
- testsuite/tests/ghc-api/exactprint/Test20239.stderr
- testsuite/tests/ghc-api/exactprint/ZeroWidthSemi.stderr
- testsuite/tests/ghc-api/fixed-nodes/InterfaceModuleGraph.hs
- + testsuite/tests/ghc-api/settings/LibDir.hs
- + testsuite/tests/ghc-api/settings/LibDir.stdout
- + testsuite/tests/ghc-api/settings/all.T
- testsuite/tests/ghc-e/should_fail/all.T
- testsuite/tests/ghci.debugger/scripts/all.T
- testsuite/tests/ghci/prog-mhu002/prog-mhu002c.stdout
- + testsuite/tests/ghci/prog-mhu006/Makefile
- + testsuite/tests/ghci/prog-mhu006/a/A.hs
- + testsuite/tests/ghci/prog-mhu006/all.T
- + testsuite/tests/ghci/prog-mhu006/b/B.hs
- + testsuite/tests/ghci/prog-mhu006/prog-mhu006a.script
- + testsuite/tests/ghci/prog-mhu006/prog-mhu006a.stdout
- + testsuite/tests/ghci/prog-mhu006/unitA
- + testsuite/tests/ghci/prog-mhu006/unitB
- testsuite/tests/ghci/prog003/prog003.script
- testsuite/tests/ghci/prog018/prog018.stdout
- testsuite/tests/ghci/prog020/Makefile
- testsuite/tests/ghci/prog020/all.T
- testsuite/tests/ghci/prog020/ghci.prog020.script → testsuite/tests/ghci/prog020/ghci.prog020a.script
- testsuite/tests/ghci/prog020/ghci.prog020.stderr → testsuite/tests/ghci/prog020/ghci.prog020a.stderr
- testsuite/tests/ghci/prog020/ghci.prog020.stdout → testsuite/tests/ghci/prog020/ghci.prog020a.stdout
- + testsuite/tests/ghci/prog020/ghci.prog020b.script
- + testsuite/tests/ghci/prog020/ghci.prog020b.stderr
- + testsuite/tests/ghci/prog020/ghci.prog020b.stdout
- + testsuite/tests/ghci/prog023/Makefile
- + testsuite/tests/ghci/prog023/all.T
- + testsuite/tests/ghci/prog023/prog023a.script
- + testsuite/tests/ghci/prog023/prog023a.stdout
- + testsuite/tests/ghci/prog023/prog023b.script
- + testsuite/tests/ghci/prog023/prog023b.stdout
- + testsuite/tests/ghci/prog023/src/A.hs
- + testsuite/tests/ghci/prog024/Makefile
- + testsuite/tests/ghci/prog024/all.T
- + testsuite/tests/ghci/prog024/prog024a.script
- + testsuite/tests/ghci/prog024/prog024a.stdout
- + testsuite/tests/ghci/prog024/prog024b.script
- + testsuite/tests/ghci/prog024/prog024b.stdout
- + testsuite/tests/ghci/prog024/prog024c.script
- + testsuite/tests/ghci/prog024/prog024c.stderr
- + testsuite/tests/ghci/prog024/prog024c.stdout
- + testsuite/tests/ghci/prog024/prog024d.script
- + testsuite/tests/ghci/prog024/prog024d.stderr
- + testsuite/tests/ghci/prog024/prog024d.stdout
- + testsuite/tests/ghci/prog024/prog024e.script
- + testsuite/tests/ghci/prog024/prog024e.stdout
- + testsuite/tests/ghci/prog024/prog024f.script
- + testsuite/tests/ghci/prog024/prog024f.stdout
- + testsuite/tests/ghci/prog024/src/A.hs
- + testsuite/tests/ghci/prog024/src/B.hs
- + testsuite/tests/ghci/prog025/Makefile
- + testsuite/tests/ghci/prog025/a/A.hs
- + testsuite/tests/ghci/prog025/all.T
- + testsuite/tests/ghci/prog025/prog025a.script
- + testsuite/tests/ghci/prog025/prog025a.stdout
- + testsuite/tests/ghci/prog025/prog025b.script
- + testsuite/tests/ghci/prog025/prog025b.stdout
- + testsuite/tests/ghci/prog025/testpkg/Test.hs
- + testsuite/tests/ghci/prog025/testpkg/testpkg-0.1.0.0.pkg
- + testsuite/tests/ghci/prog025/testpkg/testpkg-0.2.0.0.pkg
- + testsuite/tests/ghci/prog025/unitA
- testsuite/tests/ghci/scripts/ListTuplePunsPprNoAbbrevTuple.stdout
- testsuite/tests/ghci/scripts/T13997.stdout
- testsuite/tests/ghci/scripts/T1914.stdout
- testsuite/tests/ghci/scripts/T20217.stdout
- testsuite/tests/ghci/scripts/T8042.stdout
- testsuite/tests/ghci/scripts/T8042recomp.stdout
- testsuite/tests/ghci/scripts/all.T
- testsuite/tests/ghci/scripts/ghci024.stdout
- testsuite/tests/ghci/scripts/ghci024.stdout-mingw32
- testsuite/tests/ghci/should_run/T10920.stderr
- testsuite/tests/haddock/haddock_testsuite/Makefile
- testsuite/tests/haddock/haddock_testsuite/all.T
- testsuite/tests/haddock/should_compile_flag_haddock/T17544.stderr
- testsuite/tests/haddock/should_compile_flag_haddock/T17544_kw.stderr
- testsuite/tests/haddock/should_compile_flag_haddock/T24221.stderr
- + testsuite/tests/interface-stability/.gitignore
- testsuite/tests/interface-stability/README.mkd
- testsuite/tests/interface-stability/base-exports.stdout
- testsuite/tests/interface-stability/base-exports.stdout-javascript-unknown-ghcjs
- testsuite/tests/interface-stability/base-exports.stdout-mingw32
- − testsuite/tests/interface-stability/base-exports.stdout-ws-32
- + testsuite/tests/interface-stability/download-base-exports.sh
- testsuite/tests/interface-stability/ghc-bignum-exports.stdout
- testsuite/tests/interface-stability/ghc-experimental-exports.stdout
- testsuite/tests/interface-stability/ghc-experimental-exports.stdout-mingw32
- testsuite/tests/interface-stability/ghc-prim-exports.stdout
- testsuite/tests/interface-stability/ghc-prim-exports.stdout-mingw32
- testsuite/tests/interface-stability/template-haskell-exports.stdout
- testsuite/tests/javascript/closure/all.T
- testsuite/tests/linters/notes.stdout
- testsuite/tests/module/mod185.stderr
- testsuite/tests/numeric/should_compile/T15547.stderr
- testsuite/tests/numeric/should_compile/T20347.stderr
- testsuite/tests/numeric/should_compile/T20374.stderr
- testsuite/tests/numeric/should_compile/T20376.stderr
- + testsuite/tests/numeric/should_run/T21176.hs
- + testsuite/tests/numeric/should_run/T21176.stdout
- + testsuite/tests/numeric/should_run/T21176.stdout-ws-32
- testsuite/tests/numeric/should_run/all.T
- testsuite/tests/numeric/should_run/foundation.hs
- testsuite/tests/overloadedrecflds/should_compile/DRFPatSynExport.stdout
- + testsuite/tests/package/ImportReexport.hs
- + testsuite/tests/package/ImportReexport.stderr
- testsuite/tests/package/all.T
- testsuite/tests/parser/should_compile/DumpParsedAst.stderr
- testsuite/tests/parser/should_compile/DumpParsedAstComments.stderr
- testsuite/tests/parser/should_compile/DumpRenamedAst.stderr
- testsuite/tests/parser/should_compile/DumpSemis.stderr
- testsuite/tests/parser/should_compile/KindSigs.stderr
- testsuite/tests/parser/should_compile/ListTuplePunsSuccess1.hs
- testsuite/tests/parser/should_compile/T14189.stderr
- testsuite/tests/parser/should_compile/T15323.stderr
- testsuite/tests/parser/should_compile/T20452.stderr
- testsuite/tests/parser/should_compile/T20718.stderr
- testsuite/tests/parser/should_compile/T20718b.stderr
- testsuite/tests/parser/should_compile/T20846.stderr
- testsuite/tests/parser/should_compile/T23315/T23315.stderr
- testsuite/tests/parser/should_compile/all.T
- + testsuite/tests/parser/should_fail/ListTuplePunsFail6.hs
- + testsuite/tests/parser/should_fail/ListTuplePunsFail6.stderr
- testsuite/tests/parser/should_fail/all.T
- testsuite/tests/parser/should_run/ListTuplePunsConstraints.hs
- testsuite/tests/perf/compiler/Makefile
- testsuite/tests/perf/compiler/T11068.stdout
- + testsuite/tests/perf/compiler/T26426.hs
- + testsuite/tests/perf/compiler/T26989.hs
- + testsuite/tests/perf/compiler/T26989a.hs
- testsuite/tests/perf/compiler/all.T
- testsuite/tests/perf/compiler/genMultiComp.py
- + testsuite/tests/perf/should_run/T11226.hs
- + testsuite/tests/perf/should_run/T11226.stdout
- testsuite/tests/perf/should_run/all.T
- testsuite/tests/pmcheck/should_compile/T12957.stderr
- testsuite/tests/printer/AnnotationNoListTuplePuns.stdout
- testsuite/tests/printer/Makefile
- testsuite/tests/printer/PprModifiers.hs
- + testsuite/tests/printer/PprQualifiedStrings.hs
- testsuite/tests/printer/T18052a.stderr
- testsuite/tests/printer/T18791.stderr
- testsuite/tests/printer/Test10309.hs
- testsuite/tests/printer/Test20297.stdout
- testsuite/tests/printer/Test24533.stdout
- + testsuite/tests/printer/Test27291.hs
- testsuite/tests/printer/all.T
- + testsuite/tests/profiling/should_compile/T27182.hs
- + testsuite/tests/profiling/should_compile/T27386.hs
- testsuite/tests/profiling/should_compile/all.T
- + testsuite/tests/profiling/should_run/T27225.hs
- + testsuite/tests/profiling/should_run/T27225.stdout
- + testsuite/tests/profiling/should_run/T27225b.hs
- + testsuite/tests/profiling/should_run/T27225b.stdout
- testsuite/tests/profiling/should_run/all.T
- testsuite/tests/profiling/should_run/caller-cc/CallerCc1.prof.sample
- testsuite/tests/profiling/should_run/callstack001.stdout
- testsuite/tests/profiling/should_run/scc001.prof.sample
- testsuite/tests/profiling/should_run/staticcallstack002.stdout
- testsuite/tests/quasiquotation/qq001/qq001.stderr
- testsuite/tests/quasiquotation/qq002/qq002.stderr
- testsuite/tests/quasiquotation/qq003/qq003.stderr
- testsuite/tests/quasiquotation/qq004/qq004.stderr
- testsuite/tests/quotes/LiftErrMsg.stderr
- testsuite/tests/quotes/LiftErrMsgDefer.stderr
- testsuite/tests/quotes/LiftErrMsgTyped.stderr
- testsuite/tests/quotes/T10384.stderr
- testsuite/tests/quotes/T5721.stderr
- testsuite/tests/quotes/TH_localname.stderr
- testsuite/tests/rename/should_compile/T1792_imports.stdout
- testsuite/tests/rename/should_compile/T18264.stdout
- testsuite/tests/rename/should_compile/T4239.stdout
- + testsuite/tests/rts/T25275/DebugIpe.hs
- + testsuite/tests/rts/T25275/T25275_A.stdout
- + testsuite/tests/rts/T25275/T25275_B.stdout
- + testsuite/tests/rts/T25275/T25275_C.stdout
- + testsuite/tests/rts/T25275/T25275_D.stdout
- + testsuite/tests/rts/T25275/TraceIpe.hs
- + testsuite/tests/rts/T25275/all.T
- testsuite/tests/rts/T27131.hs
- testsuite/tests/rts/T27131.stdout
- + testsuite/tests/rts/T27434.hs
- + testsuite/tests/rts/T27434.stdout
- testsuite/tests/rts/all.T
- testsuite/tests/showIface/DocsInHiFile1.stdout
- testsuite/tests/showIface/DocsInHiFileTH.stdout
- testsuite/tests/showIface/NoExportList.stdout
- testsuite/tests/simplCore/should_compile/DsSpecPragmas.stderr
- testsuite/tests/simplCore/should_compile/Makefile
- testsuite/tests/simplCore/should_compile/RewriteHigherOrderPatterns.stderr
- testsuite/tests/simplCore/should_compile/T13156.stdout
- testsuite/tests/simplCore/should_compile/T15205.stderr
- testsuite/tests/simplCore/should_compile/T18668.stderr
- testsuite/tests/simplCore/should_compile/T19246.stderr
- testsuite/tests/simplCore/should_compile/T19599.stderr
- testsuite/tests/simplCore/should_compile/T19599a.stderr
- testsuite/tests/simplCore/should_compile/T21917.stderr
- testsuite/tests/simplCore/should_compile/T23074.stderr
- testsuite/tests/simplCore/should_compile/T24359a.stderr
- testsuite/tests/simplCore/should_compile/T25160.stderr
- testsuite/tests/simplCore/should_compile/T25718c.stderr-ws-32
- testsuite/tests/simplCore/should_compile/T25718c.stderr-ws-64
- testsuite/tests/simplCore/should_compile/T26051.stderr
- testsuite/tests/simplCore/should_compile/T26116.stderr
- testsuite/tests/simplCore/should_compile/T26615.stderr
- + testsuite/tests/simplCore/should_compile/T27261.hs
- + testsuite/tests/simplCore/should_compile/T27261_aux.hs
- + testsuite/tests/simplCore/should_compile/T27296.hs
- + testsuite/tests/simplCore/should_compile/T27296.stdout
- + testsuite/tests/simplCore/should_compile/T27296b.hs
- + testsuite/tests/simplCore/should_compile/T27296b.stdout
- + testsuite/tests/simplCore/should_compile/T4081.hs
- + testsuite/tests/simplCore/should_compile/T4081.stderr
- testsuite/tests/simplCore/should_compile/T4201.stdout
- testsuite/tests/simplCore/should_compile/T8331.stderr
- testsuite/tests/simplCore/should_compile/T8832.hs
- testsuite/tests/simplCore/should_compile/T8832.stdout
- testsuite/tests/simplCore/should_compile/T8848a.stderr
- testsuite/tests/simplCore/should_compile/all.T
- testsuite/tests/simplCore/should_compile/spec004.stderr
- + testsuite/tests/simplCore/should_run/T27005.hs
- + testsuite/tests/simplCore/should_run/T27005.stdout
- + testsuite/tests/simplCore/should_run/T27005_aux.hs
- testsuite/tests/simplCore/should_run/all.T
- testsuite/tests/simplStg/should_compile/T24806.hs
- testsuite/tests/simplStg/should_compile/T24806.stderr
- + testsuite/tests/simplStg/should_compile/T27005b.hs
- + testsuite/tests/simplStg/should_compile/T27005b.stderr
- testsuite/tests/simplStg/should_compile/all.T
- testsuite/tests/simplStg/should_compile/inferTags004.hs
- testsuite/tests/simplStg/should_compile/inferTags004.stderr
- + testsuite/tests/simplStg/should_run/T27005a.hs
- + testsuite/tests/simplStg/should_run/T27005a.stdout
- testsuite/tests/simplStg/should_run/all.T
- testsuite/tests/splice-imports/SI03.stderr
- testsuite/tests/splice-imports/SI05.stderr
- testsuite/tests/splice-imports/SI08.stderr
- testsuite/tests/splice-imports/SI08_oneshot.stderr
- testsuite/tests/splice-imports/SI16.stderr
- testsuite/tests/splice-imports/SI18.stderr
- testsuite/tests/splice-imports/SI20.stderr
- testsuite/tests/splice-imports/SI25.stderr
- testsuite/tests/splice-imports/SI28.stderr
- testsuite/tests/splice-imports/SI29.stderr
- testsuite/tests/splice-imports/SI31.stderr
- testsuite/tests/splice-imports/SI36.stderr
- testsuite/tests/splice-imports/T26088.stderr
- testsuite/tests/splice-imports/T26090.stderr
- + testsuite/tests/splice-imports/T26616.hs
- + testsuite/tests/splice-imports/T26616.stderr
- testsuite/tests/splice-imports/all.T
- testsuite/tests/th/T16976z.stderr
- testsuite/tests/th/T17820a.stderr
- testsuite/tests/th/T17820b.stderr
- testsuite/tests/th/T17820c.stderr
- testsuite/tests/th/T17820d.stderr
- testsuite/tests/th/T17820e.stderr
- testsuite/tests/th/T21547.stderr
- testsuite/tests/th/T23829_hasty.stderr
- testsuite/tests/th/T23829_hasty_b.stderr
- testsuite/tests/th/T23829_tardy.ghc.stderr
- testsuite/tests/th/T24111.stdout
- testsuite/tests/th/T26098_local.stderr
- testsuite/tests/th/T26098_quote.stderr
- testsuite/tests/th/T26098_splice.stderr
- testsuite/tests/th/T26099.stderr
- testsuite/tests/th/T26568.stderr
- + testsuite/tests/th/T27022.hs
- + testsuite/tests/th/T27022.stdout
- testsuite/tests/th/T5795.stderr
- testsuite/tests/th/all.T
- testsuite/tests/typecheck/should_compile/T13032.stderr
- + testsuite/tests/typecheck/should_compile/T23135.hs
- testsuite/tests/typecheck/should_compile/all.T
- testsuite/tests/typecheck/should_compile/subsumption_sort_hole_fits.stderr
- testsuite/tests/typecheck/should_fail/T13292.stderr
- testsuite/tests/typecheck/should_fail/T21130.stderr
- + testsuite/tests/typecheck/should_fail/T27390-explicit-kinds.stderr
- + testsuite/tests/typecheck/should_fail/T27390.hs
- + testsuite/tests/typecheck/should_fail/T27390.stderr
- + testsuite/tests/typecheck/should_fail/T27390a.hs
- testsuite/tests/typecheck/should_fail/all.T
- utils/check-exact/ExactPrint.hs
- utils/check-exact/Main.hs
- utils/check-exact/Preprocess.hs
- utils/check-exact/Transform.hs
- utils/check-exact/Utils.hs
- utils/ghc-pkg/Main.hs
- utils/ghc-toolchain/exe/Main.hs
- utils/ghc-toolchain/src/GHC/Toolchain/Program.hs
- utils/ghc-toolchain/src/GHC/Toolchain/Target.hs
- utils/ghc-toolchain/src/GHC/Toolchain/Utils.hs
- utils/haddock/CONTRIBUTING.md
- utils/haddock/haddock-api/haddock-api.cabal
- utils/haddock/haddock-api/src/Haddock.hs
- utils/haddock/haddock-api/src/Haddock/Backends/Hoogle.hs
- utils/haddock/haddock-api/src/Haddock/Backends/Hyperlinker.hs
- utils/haddock/haddock-api/src/Haddock/Backends/Hyperlinker/Parser.hs
- utils/haddock/haddock-api/src/Haddock/Backends/LaTeX.hs
- utils/haddock/haddock-api/src/Haddock/Backends/Xhtml.hs
- utils/haddock/haddock-api/src/Haddock/Backends/Xhtml/Decl.hs
- utils/haddock/haddock-api/src/Haddock/Backends/Xhtml/DocMarkup.hs
- utils/haddock/haddock-api/src/Haddock/Backends/Xhtml/Meta.hs
- utils/haddock/haddock-api/src/Haddock/Backends/Xhtml/Names.hs
- utils/haddock/haddock-api/src/Haddock/Backends/Xhtml/Utils.hs
- utils/haddock/haddock-api/src/Haddock/Convert.hs
- utils/haddock/haddock-api/src/Haddock/Doc.hs
- utils/haddock/haddock-api/src/Haddock/GhcUtils.hs
- utils/haddock/haddock-api/src/Haddock/Interface/AttachInstances.hs
- utils/haddock/haddock-api/src/Haddock/Interface/Create.hs
- utils/haddock/haddock-api/src/Haddock/Interface/Json.hs
- utils/haddock/haddock-api/src/Haddock/Interface/LexParseRn.hs
- utils/haddock/haddock-api/src/Haddock/Interface/ParseModuleHeader.hs
- utils/haddock/haddock-api/src/Haddock/Interface/Rename.hs
- utils/haddock/haddock-api/src/Haddock/Interface/RenameType.hs
- utils/haddock/haddock-api/src/Haddock/InterfaceFile.hs
- utils/haddock/haddock-api/src/Haddock/Options.hs
- utils/haddock/haddock-api/src/Haddock/Parser.hs
- utils/haddock/haddock-api/src/Haddock/Types.hs
- utils/haddock/haddock-api/src/Haddock/Utils.hs
- utils/haddock/haddock-api/src/Haddock/Utils/Json.hs
- utils/haddock/haddock-api/src/Haddock/Utils/Json/Parser.hs
- utils/haddock/haddock-api/src/Haddock/Utils/Json/Types.hs
- utils/haddock/haddock-library/src/Documentation/Haddock/Doc.hs
- utils/haddock/haddock-library/src/Documentation/Haddock/Markup.hs
- utils/haddock/haddock-library/src/Documentation/Haddock/Parser.hs
- utils/haddock/haddock-library/src/Documentation/Haddock/Parser/Util.hs
- utils/haddock/haddock-library/src/Documentation/Haddock/Types.hs
- utils/haddock/haddock-library/test/Documentation/Haddock/ParserSpec.hs
- utils/haddock/haddock-test/haddock-test.cabal
- utils/haddock/haddock-test/src/Test/Haddock/Config.hs
- utils/haddock/html-test/ref/Hash.html
- utils/haddock/html-test/ref/Test.html
- utils/haddock/html-test/ref/TypeFamilies3.html
- utils/jsffi/prelude.mjs

The diff was not included because it is too large.

View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/40f43b8952e55d497b046491a0a9718...

-- 
View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/40f43b8952e55d497b046491a0a9718...
You're receiving this email because of your account on gitlab.haskell.org.

[Git][ghc/ghc][wip/dcoutts/issue-26717] 198 commits: Use __attribute__((dllimport)) for external RTS symbol declarations

Duncan Coutts (＠dcoutts)

[Git][ghc/ghc][wip/dcoutts/issue-26717] 198 commits: Use attribute((dllimport)) for external RTS symbol declarations