Wolfgang Jeltsch pushed to branch wip/jeltsch/ghc-9-14-building-base at Glasgow Haskell Compiler / GHC Commits: 4d798b17 by Duncan Coutts at 2026-07-23T17:26:18-04:00 Eliminate STM_AWOKEN It was used as nullary closure for the block_info.closure in the case of a thread being awoken after an STM transaction. However, while it was written, it was never read, so contributed nothing to the behaviour. Furthermore, in the only place it was set (in tryWakeupThread) the why_blocked was immediately overwritten by the NotBlocked status, and the block_info was updated accordingly (by appendToRunQueue). So it didn't even serve a purpose of clarifying an intermediate state, there really was no such intermediate state. Cleaning this up will allow the BlockedOnSTM case to follow the same pattern as the other why_blocked cases that do not use the block_info, and in turn this reduces the number of different categories. - - - - - e1cece79 by Duncan Coutts at 2026-07-23T17:26:18-04:00 Document that eventlog thread stop code ThreadBlocked is no longer used It has not been used since GHC 7.0.x (2011). In 7.2 all the BlockedOn* codes were added, and these were and are used instead of ThreadBlocked. - - - - - 795db115 by Duncan Coutts at 2026-07-23T17:26:18-04:00 Add a proper mapping to eventlog external thread stop status That is the mapping from rts-internal codes, to the coes used in the status field in the eventlog EVENT_STOP_THREAD event. See issue #9003 for what goes wrong when we mess this up. In that ticket, people note that we should really not require the internal tso->why_blocked codes to leak into the external eventlog thread stop codes. The same principle applies to the StgThreadReturnCode. This change properly separates them, and explicitly maps between them using a pair of (compact, constant) tables. These tables are pretty small (with no alignment constraints) and will soon shrink so it seems a sensible tradeoff. We also introduce and use proper EVENT_STOP_THREAD constants in the event log format header. Previously there was not specification in the code for these (only in the docs): the values were encoded into the conversion code. This will allow us to renumber the internal why_blockd codes without breaking the eventlog output. - - - - - 6f1c8efa by Duncan Coutts at 2026-07-23T17:26:18-04:00 Remove unused tso->block_info.wakeup member Presumably it was used once, but not now. - - - - - 740b88a9 by Duncan Coutts at 2026-07-23T17:26:18-04:00 Document StgTSOBlockInfo to say what cases use what members In principle, tso->why_blocked is the tag for the StgTSOBlockInfo union, so we should be able to say for each union member the why_blocked cases that use that member. - - - - - 5b92eae2 by Duncan Coutts at 2026-07-23T17:26:18-04:00 Add a tso->block_info.mvar member and use it in preference to the generic block_info.closure union member, with casts. The plan is that when we know what case we're in (via tso->why_blocked) then we can always access the correct union member, and so we will only need to access block_info.closure for generic cases where we don't know or don't care. - - - - - d931715f by Duncan Coutts at 2026-07-23T17:26:18-04:00 Add a tso->block_info.unused member and use it in preference to the generic block_info.closure union member, with casts. The plan is that when we know what case we're in (via tso->why_blocked) then we can always access the correct union member, and so we will only need to access block_info.closure for generic cases where we don't know or don't care. - - - - - 47e28ebb by Duncan Coutts at 2026-07-23T17:26:18-04:00 Avoid storing to tso->block_info.closure In one case we can use a specific union member (.prev) instead. In several cases the stores were in fact redundant because of subsequent overwrites. In scavengeTSO we replace setting tso->block_info.closure to a valid closure, with an assertion that the block_info.unused is already set to END_TSO_QUEUE which is a valid (static) closure. - - - - - 96e4749d by Duncan Coutts at 2026-07-23T17:26:18-04:00 Renumber the tso->why_blocked constants We can do this now because we have separated the internal values from the external ones used in the eventlog. This lets us put them back into a deliberate order and consolodate some gaps. More importantly, it is a prepation for a slightly more sophisticated encoding. - - - - - 8f62661c by Duncan Coutts at 2026-07-23T17:26:18-04:00 Define constants for the existing stg_threadStatuszh return codes The stg_threadStatuszh reuses the internal tso->why_blocked codes but also extends them with a couple previously magic values. This is awkward since we need to know what those magic values are so we don't accidentally use those values to mean something else. By pulling a definition up to where the why_blocked codes are defined we will be able to avoid mistakenly assining those codes some meaning (or just changing the BlockedThreadComplete, BlockedThreadKilled code if necessary). - - - - - 42c69ae2 by Duncan Coutts at 2026-07-23T17:26:18-04:00 Extend the tso->why_blocked encoding to indicate block_info closures We use some bit tricks to cheaply and generically test if a tso->why_blocked tag implies that the corresponding tso->block_info will contain a non-trivial valid closure (i.e. not just block_info.unused set to END_TSO_QUEUE). In particular we arrange for most why_blocked values to naturally have a distinguishing bit, but for the BlockedOn{Read,Write,Delay} cases, they can come in either non-closure or closure forms. We allow an additional bit to distinguish these cases. The non-closure forms are only from legacy I/O managers: select and win32-legacy. So this extra bit mechanism will be able to be retired once the legacy I/O managers are themselves retired. This means in a few places we need to untag the why_blocked value before inspecting it, but in most places we do not. - - - - - 7c64632b by Duncan Coutts at 2026-07-23T17:26:18-04:00 Use BlockInfoForceNonClosure in the select I/O manager - - - - - 8fd7104a by Duncan Coutts at 2026-07-23T17:26:18-04:00 Use BlockInfoForceNonClosure in the win32-legacy I/O manager for the BlockedOn{Read,Write} since these use the non-heap allocated StgAsyncIOResult. - - - - - e0da603b by Duncan Coutts at 2026-07-23T17:26:18-04:00 Enforce the why_blocked and block_info rules in checkTSO We now check the cases wher IsBlockInfoClosure should hold, the cases that are supposed to use block_info.unused == END_TSO_QUEUE, and which cases are allowed to use BlockInfoForceNonClosure. This partially enforces the use of why_blocked as a tag for the block_info union. We could be stricter and check for the correct expected info table for the closure cases. - - - - - 1dd0f381 by Duncan Coutts at 2026-07-23T17:26:18-04:00 Use IsBlockInfoClosure to simplify several tests In GC and generic traversal we need to know if we should look at the block_info.closure or not. Now we can do just that using a cheap bit test on the why_blocked tag. This fixes issue 26717, where the problem was that some GC modes did not know when to look at block_info.closure, because the poll I/O manager uses a closure for BlockedOn{Read,Write} while the select I/O manager uses a non-closure. Now this information is in the why_blocked tag itself. - - - - - 7a00ffbc by Duncan Coutts at 2026-07-23T17:26:18-04:00 Remove the now-unused scavengeTSOIOManager The GC no longer has to delegate to the I/O manager, since it can use IsBlockInfoClosure to decide things itself. - - - - - 522a481f by Duncan Coutts at 2026-07-23T17:26:18-04:00 Remove duplicate assertion - - - - - 0874d965 by Duncan Coutts at 2026-07-23T17:26:18-04:00 Follow atomic access rules more consistently for tso->why_blocked The rule is this: store block_info *before* why_blocked store why_blocked using store release load why_blocked using load acquire load block_info *after* why_blocked This is a an atomic store release / load acquire pair and (if the reads are in a separate thread to the writes, and the read receives the value stored) then this guarantees a full "happens before" relationship of these stores and loads. In some cases, we do not need a full load acquire, because we don't read the block_info at all and so do not need any ordering. In this case we just need an atomic relaxed load. This was being followed in most places, but not all. If there's good reason in any case that we don't need atomic access, then we should document that in a comment. In the absence of that I think it's easier to follow the rule everywhere. - - - - - 8f0bdbe1 by Duncan Coutts at 2026-07-23T17:26:19-04:00 Add a changelog entry - - - - - 4fdfe757 by Alan Zimmerman at 2026-07-23T17:27:06-04:00 EPA: Keep decls together in ClassDecl Similar to 1718230f4d3d19d8c49c0e5d496cb0fb6f399528 for HsValBindsLR, this commit updates ClassDecl so that it no longer splits out the assorted `LHsDecl GhcPs` until the renamer. It does this by inserting a type family (separate from the classic TTG one) for this. So data TyClDecl ... | ClassDecl { ... tcdDecls :: XClassDecls pass with type instance XClassDecls GhcPs = [LHsDecl GhcPs] type instance XClassDecls GhcRn = ClassDeclX GhcRn type instance XClassDecls GhcTc = ClassDeclX GhcTc data ClassDeclX pass = ClassDeclX { tcdSigs :: [LSig pass], -- ^ Methods' signatures tcdMeths :: LHsBinds pass, -- ^ Default methods tcdATs :: [LFamilyDecl pass], -- ^ Associated types; tcdATDefs :: [LTyFamDefltDecl pass], -- ^ Associated type defaults tcdDocs :: [LDocDecl pass] -- ^ Haddock docs } - - - - - f586c885 by Simon Jakobi at 2026-07-24T18:05:00-04:00 ci: Use shallow submodule clones by default Limit submodule clones to depth one to reduce CI checkout costs. Keep fetching full submodule history for the submodule lint jobs, which inspect commits across a range. Assisted-by: gpt-5.6-sol via Codex CLI - - - - - 306120d2 by Duncan Coutts at 2026-07-24T18:05:43-04:00 Fix flaky test T3994 on FreeBSD On current FreeBSD versions, calling getpgid on a zombie process fails. In T3994, if we're really unlucky with delays and scheduling then we can end up in exactly that situation. Just catch that specific exception and ignore it. It's rare, and not our fault. - - - - - 7b116a0b by Cheng Shao at 2026-07-24T18:06:24-04:00 ci: add missing workaround for docker permissions in lint jobs Some lint jobs use ci-images with default user `ghc`, and the gitlab ci docker executor requires the `sudo chown` workaround to fix workspace directory permission issue. This patch adds the missing workarounds for the lint jobs. Fixes #27554. Co-authored-by: Codex <codex@openai.com> - - - - - 815149f3 by Andrzej Rybczak at 2026-07-25T15:06:43+00:00 Add -Wdefaulted-callstack Adds a new warning, -Wdefaulted-callstack, which warns when an implicit CallStack parameter is defaulted to the empty stack. In particular, this includes call sites where a function with a HasCallStack constraint is called from a definition that does *not* provide one. At such call sites the call stack is cut off and does not include the enclosing definition's callers, which can be a source of surprise if the user wants complete call stacks. Closes #27077. - - - - - f6f2343f by Zubin Duggal at 2026-07-25T17:40:51-04:00 UniqueDFM: alter should preserve insertion order Before it always inserting new elements at the end. This is problematic because instances get inserted into the map with `alterF`, which can change ordering of how instances are printed with `:info` depending on the order in which we consult interfaces I expect `alter id k = id` and `alter (fmap f) k = adjust f k`. Moving keys to the end breaks that (`adjust` already preserves position). Fixes #27532 - - - - - 5d0ab71a by fendor at 2026-07-27T17:31:05-04:00 Introduce global unit database cache As a first step for better sharing of `UnitInfo` across `UnitEnv`, we introduce a new datatype called `ExternalUnitDatabases`. It primarily serves as an in-memory representation of *all* `UnitDatabase`s across `UnitEnv`. This means, if multiple `HomeUnitEnv`s depend on the same database, one way or another, we make sure that we don't parse from disk every time. Instead, we store the in-memory representation in `ExternalUnitDatabases`. `ExternalUnitDatabaseCache` is the equivalent of `ExternalUnitState` in the `UnitEnv`. It is a mutable variable wrapping `ExternalUnitDatabases`. The mutable `ExternalUnitDatabaseCache` is used in `initUnits` to make sure we don't parse the same unit database multiple times. Almost by accident, we change the semantics of `initUnits` to honour modifications to `packageDBFlags`. The inability to change `packageDBFlags` while also reusing the already parsed `UnitDatabase`s was reported in #26423 as a bug. Hence, we think this behaviour change is warranted and acceptable, especially since it comes with a breaking change to the `initUnits` API. Add regression test for #26423 Closes #26423 - - - - - 6cce494a by fendor at 2026-07-27T17:31:05-04:00 Introduce UnitIndex for global external unit caching `UnitInfo`s have been observed to cause a lot of memory usage in #27500. Especially with multiple home units, as the same (external) units are processed from scratch, even though most of the time we end up with exactly the same `UnitInfo`. We introduce a `UnitEnv` global cache that allows us to store external unit information that is used across all `HomeUnitEnv`s. The most important change in this commit is the introduction of the `UnitIndex`. It stores a global mapping of `UnitId` -> `UnitInfo`, and `initUnits` always uses the cached `UnitInfo` entry to populate each `HomeUnitEnv`'s `UnitState`. This allows us to ensure the following property:
Each `UnitInfo` should be alive exactly once in GHC.
All `UnitState`s should reference 'UnitInfo's stored in the 'UnitIndex'. This ensured by calling 'initUnits' with the 'UnitIndex'. In addition, the `ExternalUnitDatabases` may also hold a reference to each on-disk representation of `UnitInfo`. This means, we impose an hard upper bound on the number of `UnitInfo`s alive in the GHC session:
The number of alive `UnitInfo`s closure objects must be the sum of all loaded unit database times two.
We add performance regression tests that make sure the number of live `UnitInfo` cannot exceed this threshold. Closes #27500 ------------------------- Metric Decrease: MultiComponentModules MultiComponentModulesRecomp MultiComponentModulesRecomp100 mhu-perf LinkableUsage02 ------------------------- These metrics increases are especially notable, as we are not even sharing anything big but merely the global package database with 50 entries. It shows how careful sharing of `UnitInfo` can improve memory usage. We expect this to be much more notable when the whole cabal package database is shared across multiple home units. `LinkableUsage02` metric decreases on unreg and i386 platform, only. --- Technical details To share the `UnitInfo`s correctly, it is important that we extract the `WireMap` into the `UnitIndex`. At the moment of writing, `WireMap` must be globally the same for all `HomeUnitEnv`s. This is important, as we could otherwise not cache the "fully-resolved" `UnitInfo`, as we don't change the `UnitId` or `unitAbiHash` when resolving wired-in units. Thus, there could be ambiguities, when the `WireMap` is not the same for all `UnitState`s across the `UnitEnv`. We consider a `UnitInfo` fully-resolved, if wired-in units have been updated, the `UnitInfo` has been validated and variables in the unit config, such as `${pkgroot}` have been resolved. Updating the wired-in units requires the `WireMap` to be globally the same. - - - - - f8e3bee9 by Zubin Duggal at 2026-07-27T17:31:49-04:00 testsuite: skip runtime stats tests on debugged compilers Debugged flavours build the boot libraries without optimisation, so the runtime numbers do not match the baselines. - - - - - 1e326770 by Zubin Duggal at 2026-07-27T17:31:50-04:00 testsuite: mark #20706 tests fragile rather than broken Whether the static linux linker issues manifest depends on the host toolchain. - - - - - c0b13cbe by Zubin Duggal at 2026-07-27T17:31:50-04:00 testsuite: exclude libnuma from mostly-static It needs static system libraries (libnuma.a) that many platforms do not ship. Fixes #26914 - - - - - bee1913d by Alan Zimmerman at 2026-07-28T16:42:29-04:00 EPA: ClsInstDecl with decls as [LHsDecl GhcPs] in GhcPs Similar to 4fdfe75731e01dad7d7fa474c2703d0d3965afb1, this commit changes the as-parsed representation of class instance declarations to [LHsDecl GhcPs], and only separates them by type from the renamer onward. This also allows us to remove all the AnnSortKey machinery for exact printing, as it is now no longer needed. - - - - - 72c55eee by Cheng Shao at 2026-07-28T16:43:11-04:00 hadrian: implement and use writeFileAtomic to fix race condition This patch implements `writeFileAtomic` in hadrian and change all invocations of shake non-atomic `writeFile'` to use `writeFileAtomic`, to avoid multiple hadrian concurrent invocations overwriting the same in-tree generated file not in the build root directory. Fixes #27536. Additional notes: - `writeFileChanged`/`writeFileChangedBS` cannot be made atomic since it involves reading the file's older version, so their uses are left alone. It doesn't affect #27536 given their outputs are contained in the build root directory. - It's possible to shrink this patch by only making writes outside the build root directory atomic. But I think it's not worth the effort for fine grained distinction here, and atomic writes within the build root directory should also improve robustness of a hadrian build. - In the longer term we do want to make a ghc build only generate files within the build root directory, though that's a lot of work and outside the scope of this particular bugfix. Co-authored-by: Codex <codex@openai.com> - - - - - 46d4f963 by Sylvain Henry at 2026-07-29T06:38:40-04:00 RTS: correctly mark slop bytes when shrinking large arrays (#19048) Correctly mark slop bytes even when profiling is off so that heap census doesn't traverse garbage-collected closures. - - - - - 4762a8bf by Simon Jakobi at 2026-07-29T06:39:23-04:00 Add -XLazyFieldAnnotations (GHC proposal 752) Unbundle the prefix `~` lazy field annotation syntax from StrictData. The new LazyFieldAnnotations extension controls whether `~` is accepted on constructor fields. StrictData (and Strict, transitively) imply the new extension. See https://github.com/ghc-proposals/ghc-proposals/blob/master/proposals/0752-la.... Closes #24455. Assisted-by: Claude Opus 4.8 - - - - - 0b6dcc84 by Simon Jakobi at 2026-07-29T06:40:04-04:00 testsuite: Relax T24471 residency tolerance T24471 peak residency fluctuates enough on i386 to cause spurious failures. Use the standard residency tolerance while retaining the existing allocation threshold. See https://gitlab.haskell.org/ghc/ghc/-/work_items/24471#note_682303. Assisted-by: gpt-5.6-sol via Codex CLI - - - - - 90e95b34 by Cheng Shao at 2026-07-29T06:40:45-04:00 compiler: fix missing top-level procedure labels in cmm dumps This patch fixes missing top-level procedure labels in some intermediate Cmm pass dumps. Fixes #27553. Co-authored-by: Codex <codex@openai.com> - - - - - 360a5946 by sheaf at 2026-07-29T06:41:35-04:00 Add some type-family-heavy performance tests FamAppCachePerf stress-tests the performance of lookups in the type family application cache. T27336 is a minimisation extracted from the reported reproducer. SimplCastPerf is a measure of coercion growth due to the simplifier calling mkTransCo without re-optimising the result. - - - - - 3ec9e2b9 by Mike Pilgrem at 2026-07-31T08:21:33-04:00 GHC Guide: Improve docs on response files - - - - - e5b2a1f7 by sheaf at 2026-07-31T08:22:23-04:00 Disable Core Lint for TcPlugin_RewritePerf This is a compiler performance test, but the test source hard-coded -dcore-lint, defeating the measurement. ------------------------- Metric Decrease: TcPlugin_RewritePerf ------------------------- - - - - - 85b10c00 by Alan Zimmerman at 2026-07-31T22:09:47+01:00 EPA: Remove LocatedP from OverlapMode We have type LocatedP = GenLocated SrcSpanAnnP type SrcSpanAnnP = EpAnn AnnPragma As the first step in removing this in favour of LocatedA which only captures location, comments and trailing annotations, we remove it from OverlapMode We do this by moving the AnnPragma into the TTG extension point instead. - - - - - c9a34a00 by Viktor Dukhovni at 2026-08-02T04:34:17-04:00 Fix note typo - - - - - 4f2a21f7 by Andreas Klebinger at 2026-08-02T22:46:46-04:00 Apply oneShot Monad trick to STG LintM - - - - - 21e4b89d by Andreas Klebinger at 2026-08-02T22:46:46-04:00 stgLint: Use a single reader env for read only arguments. - - - - - d415f38a by Alan Zimmerman at 2026-08-02T22:47:27-04:00 EPA: Remove LocatedP from CType The next step of removing use of LocatedP by moving the AnnPragma for CType into its TTG extension point instead. - - - - - 8fc6f882 by Simon Jakobi at 2026-08-05T14:53:41-04:00 testsuite: Don't crash on non-UTF-8 test output read_stdout, read_stderr_for, read_comp_stderr and read_diff decoded strictly (the first three with UTF-8, read_diff with the locale encoding), so a test emitting invalid UTF-8 (binary output, or a crash truncating a multi-byte character) raised UnicodeDecodeError and was reported as a framework failure instead of its actual result. Decode with errors='replace', like read_no_crs and safe_print. Assisted-by: Claude Fable 5 - - - - - 56534866 by Simon Jakobi at 2026-08-05T14:53:41-04:00 testsuite: Colorize the test summary, also in CI The summary headings were plain, and SUMMARY was colored unconditionally, so the escapes also ended up in the file written by --summary-file. Color is now decided per output sink via term_color.colored_if; see the comments in term_color. CI logs are not a tty, but GitLab's log viewer renders ANSI colors, so add --force-colors and pass it in .gitlab/ci.sh. Assisted-by: Claude Opus 5 - - - - - bceb541a by Simon Jakobi at 2026-08-05T14:53:42-04:00 testsuite: Repeat unexpected failure output in the summary Finding out why a test failed meant scrolling back through a possibly very long log to the point where the test ran. The summary now repeats the captured output of unexpected failures, before the statistics, so the most interesting part is at the end of the log (#16720). Output mismatches report their diff instead of the mismatching stream (see Note [Redundant output in test results]). The repeated output is bounded per stream, and skipped altogether beyond MAX_SUMMARY_OUTPUT_TESTS failure blocks. Tests failing identically in several ways share one block. Test results now report a source-relative directory, stable regardless of where the run was started from. Assisted-by: Claude Fable 5 - - - - - 2ab02c57 by Ben Gamari at 2026-08-05T14:54:24-04:00 base: Don't drop exception context in SomeException(toException) For reasons that are lost to time, the implementation of [CLC #200] that was merged inappropriately dropped `ExceptionContext` in the `toException` implementation given to `SomeException`. Fix this infelicity. [CLC #200]: https://github.com/haskell/core-libraries-committee/issues/200 - - - - - 126ce574 by Vladislav Zavialov at 2026-08-05T14:55:05-04:00 Test case for #20902 Starting with GHC 9.14.1 (the first major release to include 51e3ec83), and from point releases GHC 9.10.2 and GHC 9.12.3 (backports cc4470be68 and b30f25591e), all examples in this ticket are handled as expected. - - - - - b14d8d59 by Alan Zimmerman at 2026-08-05T14:55:46-04:00 EPA: Remove LocatedP, last use in WarningTxt The last step of removing LocatedP, by moving the AnnPragma for WarningTxt into its TTG extension point instead. This also allows us to remove LocatedP and SrcSpanAnnP - - - - - 70b58c8f by Vladislav Zavialov at 2026-08-05T14:56:27-04:00 Test cases for #18725 Starting with GHC 9.4 (the first release to include 268efcc9a4), the program in this ticket no longer panics. A standalone kind signature breaks the recursive loop, so the type constructor can be used in a kind within its own group. T18725a checks that this is accepted with the signature present, while T18725b confirms it is still rejected without it. - - - - - 561bab24 by Wolfgang Jeltsch at 2026-08-06T21:29:42+03:00 Add test for `base` being buildable with released GHCs - - - - - a7f11d65 by Wolfgang Jeltsch at 2026-08-06T21:29:42+03:00 Switch to GHC 9.14.2 - - - - - 429c6cce by Wolfgang Jeltsch at 2026-08-06T21:29:42+03:00 Make .gitlab/base-ci.sh` executable - - - - - 248 changed files: - .gitlab-ci.yml - + .gitlab/base-ci.sh - .gitlab/ci.sh - + changelog.d/27532 - + changelog.d/T26423 - + changelog.d/T26716 - + changelog.d/T27455 - + changelog.d/fix-cmm-dump-labels - + changelog.d/fix-heap-census-large-arrays-19048 - + changelog.d/lazy-field-annotations - + changelog.d/unit-index - + changelog.d/warn-defaulted-callstack - compiler/GHC.hs - compiler/GHC/Builtin/Utils.hs - compiler/GHC/Cmm/Pipeline.hs - compiler/GHC/Driver/Backpack.hs - compiler/GHC/Driver/Env.hs - compiler/GHC/Driver/Flags.hs - compiler/GHC/Driver/Main/Hsc.hs - compiler/GHC/Driver/Main/Interactive.hs - compiler/GHC/Driver/Main/Passes.hs - compiler/GHC/Driver/Session.hs - compiler/GHC/Driver/Session/Units.hs - compiler/GHC/Hs/Decls.hs - compiler/GHC/Hs/Decls/Overlap.hs - compiler/GHC/Hs/Dump.hs - compiler/GHC/Hs/Instances.hs - compiler/GHC/Hs/Stats.hs - compiler/GHC/Hs/Utils.hs - compiler/GHC/HsToCore/Docs.hs - compiler/GHC/HsToCore/Quote.hs - compiler/GHC/Iface/Ext/Ast.hs - compiler/GHC/Iface/Syntax.hs - compiler/GHC/Iface/Warnings.hs - compiler/GHC/Parser.y - compiler/GHC/Parser/Annotation.hs - compiler/GHC/Parser/PostProcess.hs - compiler/GHC/Parser/PostProcess/Haddock.hs - compiler/GHC/Rename/Module.hs - compiler/GHC/Rename/Names.hs - compiler/GHC/Stg/Lint.hs - compiler/GHC/Tc/Deriv.hs - compiler/GHC/Tc/Errors/Ppr.hs - compiler/GHC/Tc/Errors/Types.hs - compiler/GHC/Tc/Solver/Default.hs - compiler/GHC/Tc/Solver/Dict.hs - compiler/GHC/Tc/TyCl.hs - compiler/GHC/Tc/TyCl/Class.hs - compiler/GHC/Tc/TyCl/Instance.hs - compiler/GHC/Tc/Types/Evidence.hs - compiler/GHC/Tc/Types/Origin.hs - compiler/GHC/Tc/Utils/Env.hs - compiler/GHC/Tc/Utils/Instantiate.hs - compiler/GHC/Tc/Utils/Unify.hs - compiler/GHC/ThToHs.hs - compiler/GHC/Types/Error/Codes.hs - compiler/GHC/Types/ForeignCall.hs - compiler/GHC/Types/Unique.hs - compiler/GHC/Types/Unique/DFM.hs - compiler/GHC/Unit/Env.hs - + compiler/GHC/Unit/External/Database.hs - + compiler/GHC/Unit/External/Index.hs - + compiler/GHC/Unit/External/ModuleOrigin.hs - + compiler/GHC/Unit/External/Providers.hs - + compiler/GHC/Unit/External/Query.hs - + compiler/GHC/Unit/External/Substitution.hs - + compiler/GHC/Unit/External/Validate.hs - + compiler/GHC/Unit/External/Visibility.hs - + compiler/GHC/Unit/External/Wired.hs - compiler/GHC/Unit/Home/Graph.hs - compiler/GHC/Unit/Info.hs - compiler/GHC/Unit/Module/Warnings.hs - compiler/GHC/Unit/State.hs - compiler/GHC/Unit/State.hs-boot - compiler/GHC/Unit/Types.hs - compiler/Language/Haskell/Syntax/Binds.hs - compiler/Language/Haskell/Syntax/Decls.hs - compiler/ghc.cabal.in - docs/users_guide/eventlog-formats.rst - docs/users_guide/exts/strict.rst - docs/users_guide/using-warnings.rst - docs/users_guide/using.rst - ghc/GHCi/UI.hs - hadrian/src/Hadrian/Builder/Ar.hs - hadrian/src/Hadrian/Utilities.hs - hadrian/src/Rules/BinaryDist.hs - hadrian/src/Rules/CabalReinstall.hs - hadrian/src/Rules/Documentation.hs - hadrian/src/Rules/Generate.hs - hadrian/src/Rules/Library.hs - hadrian/src/Rules/Nofib.hs - hadrian/src/Rules/Program.hs - hadrian/src/Rules/Register.hs - hadrian/src/Rules/Rts.hs - hadrian/src/Rules/SourceDist.hs - hadrian/src/Rules/Test.hs - hadrian/src/Rules/ToolArgs.hs - libraries/base/changelog.md - libraries/base/src/GHC/Stack.hs - libraries/ghc-heap/GHC/Exts/Heap/FFIClosures_ProfilingDisabled.hsc - libraries/ghc-heap/GHC/Exts/Heap/FFIClosures_ProfilingEnabled.hsc - libraries/ghc-internal/src/GHC/Internal/Conc/Sync.hs - libraries/ghc-internal/src/GHC/Internal/Exception/Type.hs - libraries/ghc-internal/src/GHC/Internal/Ix.hs - libraries/ghc-internal/src/GHC/Internal/LanguageExtensions.hs - libraries/ghc-internal/src/GHC/Internal/Stack.hs - rts/Apply.cmm - rts/IOManager.c - rts/IOManager.h - rts/ZeroSlop.c → rts/MarkSlop.c - rts/Messages.c - rts/PrimOps.cmm - rts/Printer.c - rts/ProfHeap.c - rts/RaiseAsync.c - rts/RaiseAsync.h - rts/RtsFlags.c - rts/STM.c - rts/Schedule.c - rts/StgMiscClosures.cmm - rts/ThreadPaused.c - rts/Threads.c - rts/Trace.c - rts/Trace.h - rts/TraverseHeap.c - rts/include/Cmm.h - rts/include/rts/Constants.h - rts/include/rts/EventLogFormat.h - rts/include/rts/storage/ClosureMacros.h - rts/include/rts/storage/TSO.h - rts/include/stg/MiscClosures.h - rts/posix/Poll.c - rts/posix/Select.c - rts/posix/Timeout.c - rts/rts.cabal - rts/sm/Compact.c - rts/sm/NonMovingMark.c - rts/sm/Sanity.c - rts/sm/Scav.c - rts/sm/Storage.c - rts/win32/AsyncMIO.c - testsuite/driver/runtests.py - testsuite/driver/term_color.py - testsuite/driver/testlib.py - testsuite/tests/count-deps/CountDepsParser.stdout - + testsuite/tests/deSugar/should_run/LazyFieldAnnotationsSemantics.hs - + testsuite/tests/deSugar/should_run/LazyFieldAnnotationsSemantics.stdout - testsuite/tests/deSugar/should_run/all.T - + testsuite/tests/driver/T26423/Hello.hs - + testsuite/tests/driver/T26423/Makefile - + testsuite/tests/driver/T26423/T26423.hs - + testsuite/tests/driver/T26423/T26423.stderr - + testsuite/tests/driver/T26423/T26423.stdout - + testsuite/tests/driver/T26423/all.T - + testsuite/tests/driver/T26423/test/Test.hs - + testsuite/tests/driver/T26423/test/test.pkg - testsuite/tests/driver/T4437.hs - + testsuite/tests/driver/TUnitInfo/Foo.hs - + testsuite/tests/driver/TUnitInfo/Makefile - + testsuite/tests/driver/TUnitInfo/all.T - + testsuite/tests/driver/TUnitInfo/genMhu.sh - + testsuite/tests/driver/TUnitInfo/generic-unit-info-space-mhu.stdout - + testsuite/tests/driver/TUnitInfo/generic-unit-info-space-single.stdout - + testsuite/tests/driver/TUnitInfo/generic-unit-info-space.hs - + testsuite/tests/driver/TUnitInfo/generic-unit-info-space.stdout - testsuite/tests/driver/all.T - testsuite/tests/driver/mostly-static/Makefile - testsuite/tests/ghc-e/should_fail/T18441fail7.stderr - testsuite/tests/ghc-e/should_run/ghc-e005.stderr - testsuite/tests/ghci/T13786/all.T - testsuite/tests/ghci/T16793/T16793.stdout - testsuite/tests/ghci/T18060/T18060.stdout - + testsuite/tests/ghci/T27532/Makefile - + testsuite/tests/ghci/T27532/T27532.stdout - + testsuite/tests/ghci/T27532/T27532j4.stdout - + testsuite/tests/ghci/T27532/a.script - + testsuite/tests/ghci/T27532/all.T - + testsuite/tests/ghci/T27532/b.script - + testsuite/tests/ghci/T27532/genT27532Modules - testsuite/tests/ghci/linking/all.T - testsuite/tests/ghci/linking/dyn/all.T - testsuite/tests/ghci/scripts/ListTuplePunsPpr.stdout - testsuite/tests/ghci/scripts/T4175.stdout - testsuite/tests/ghci/scripts/T8469.stdout - testsuite/tests/ghci/scripts/T8535.stdout - testsuite/tests/ghci/scripts/T9881.stdout - testsuite/tests/ghci/scripts/ghci020.stdout - testsuite/tests/ghci/scripts/ghci064.stdout - testsuite/tests/ghci/should_run/T10145.stdout - testsuite/tests/ghci/should_run/T18594.stdout - testsuite/tests/haddock/haddock_examples/haddock.Test.stderr - testsuite/tests/haddock/should_compile_flag_haddock/T17544.stderr - testsuite/tests/haddock/should_compile_flag_haddock/T17544_kw.stderr - testsuite/tests/interface-stability/base-exports.stdout - testsuite/tests/interface-stability/base-exports.stdout-javascript-unknown-ghcjs - testsuite/tests/interface-stability/base-exports.stdout-mingw32 - testsuite/tests/interface-stability/template-haskell-exports.stdout - testsuite/tests/package/T20010/all.T - testsuite/tests/parser/should_compile/DumpRenamedAst.stderr - testsuite/tests/parser/should_compile/DumpSemis.stderr - testsuite/tests/parser/should_compile/T20452.stderr - testsuite/tests/partial-sigs/should_compile/ExtraConstraints3.stderr - + testsuite/tests/perf/compiler/FamAppCachePerf.hs - + testsuite/tests/perf/compiler/SimplCastPerf.hs - + testsuite/tests/perf/compiler/T27336.hs - testsuite/tests/perf/compiler/all.T - testsuite/tests/plugins/all.T - testsuite/tests/printer/Test24533.stdout - testsuite/tests/process/T3994.hs - testsuite/tests/roles/should_compile/Roles14.stderr - testsuite/tests/roles/should_compile/Roles3.stderr - testsuite/tests/roles/should_compile/Roles4.stderr - testsuite/tests/roles/should_compile/T8958.stderr - + testsuite/tests/rts/T19048.hs - + testsuite/tests/rts/T19048.stdout - testsuite/tests/rts/all.T - testsuite/tests/rts/linker/all.T - + testsuite/tests/saks/should_compile/T18725a.hs - testsuite/tests/saks/should_compile/all.T - + testsuite/tests/saks/should_fail/T18725b.hs - + testsuite/tests/saks/should_fail/T18725b.stderr - testsuite/tests/saks/should_fail/all.T - testsuite/tests/tcplugins/TcPlugin_RewritePerf.hs - testsuite/tests/tcplugins/TcPlugin_RewritePerf.stderr - + testsuite/tests/th/T20902.hs - testsuite/tests/th/all.T - + testsuite/tests/typecheck/should_compile/LazyFieldAnnotations.hs - testsuite/tests/typecheck/should_compile/T18406b.stderr - testsuite/tests/typecheck/should_compile/T18529.stderr - + testsuite/tests/typecheck/should_compile/WarnDefaultedCallStack.hs - + testsuite/tests/typecheck/should_compile/WarnDefaultedCallStack.stderr - testsuite/tests/typecheck/should_compile/all.T - testsuite/tests/typecheck/should_fail/LazyFieldsDisabled.stderr - + testsuite/tests/typecheck/should_fail/LazyFieldsDisabledStrictData.hs - + testsuite/tests/typecheck/should_fail/LazyFieldsDisabledStrictData.stderr - testsuite/tests/typecheck/should_fail/T5300.stderr - testsuite/tests/typecheck/should_fail/all.T - utils/check-exact/ExactPrint.hs - utils/check-exact/Utils.hs - utils/haddock/haddock-api/src/Haddock.hs - utils/haddock/haddock-api/src/Haddock/Backends/Hoogle.hs - utils/haddock/haddock-api/src/Haddock/Backends/LaTeX.hs - utils/haddock/haddock-api/src/Haddock/Backends/Xhtml/Decl.hs - utils/haddock/haddock-api/src/Haddock/Convert.hs - utils/haddock/haddock-api/src/Haddock/GhcUtils.hs - utils/haddock/haddock-api/src/Haddock/Interface/Create.hs - utils/haddock/haddock-api/src/Haddock/Interface/Rename.hs - utils/haddock/haddock-api/src/Haddock/Types.hs The diff was not included because it is too large. View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/409524ee2ee85f108fa73be9c30c9e3... -- View it on GitLab: https://gitlab.haskell.org/ghc/ghc/-/compare/409524ee2ee85f108fa73be9c30c9e3... You're receiving this email because of your account on gitlab.haskell.org. Manage all notifications: https://gitlab.haskell.org/-/profile/notifications | Help: https://gitlab.haskell.org/help