April 2014 - ghc-tickets

[GHC] #8123: GHCi warns about -eventlog even though it's sometimes necessary
by GHC 19 Jul '15

19 Jul '15

#8123: GHCi warns about -eventlog even though it's sometimes necessary -------------------------+------------------------------------------------- Reporter: akio | Owner: Type: bug | Status: new Priority: | Milestone: normal | Version: 7.6.3 Component: GHCi | Operating System: Linux Keywords: | Type of failure: Incorrect warning at Architecture: | compile-time x86_64 (amd64) | Test Case: Difficulty: | Blocking: Unknown | Blocked By: | Related Tickets: | -------------------------+------------------------------------------------- If I invoke GHCi as {{{ghci -eventlog}}}, it says: {{{Warning: -debug, -threaded and -ticky are ignored by GHCi}}}. However, the flag does make a difference, in that GHCi will be able to load object files that were compiled using {{{-eventlog}}}. For this reason, I don't think {{{-eventlog}}} should trigger the warning. Also runghc has the same issue. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8123> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 4

[GHC] #8709: `make 1` does not work (well)
by GHC 10 Jul '15

10 Jul '15

#8709: `make 1` does not work (well) ------------------------------------+------------------------------------- Reporter: goldfire | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Build System | Version: 7.7 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- Say I do a `sync-all pull` and then fix a bunch of merge errors. The changes mean that I need to recompile the stage-1 compiler. So, I dutifully `make distclean` and start rebuilding. I then find a bunch of compiler errors in my edited code. Now, I'd like to start the fix error/recompile loop. BUT, when I do `make 1` in the `compiler/` directory, I get errors: {{{ rae:13:49:29 ~/Documents/ghc/compiler> make 1 make -C .. stage=1 all_ghc_stage1 compiler_dist_NO_BUILD_DEPS=YES compiler_dist-boot_NO_BUILD_DEPS=YES compiler_dist- install_NO_BUILD_DEPS=YES NO_GENERATED_MAKEFILE_RULES=YES OMIT_PHASE_0=YES OMIT_PHASE_1=YES compiler_stage1_NO_BUILD_DEPS=YES compiler_stage2_NO_BUILD_DEPS=YES compiler_stage3_NO_BUILD_DEPS=YES ghc_stage1_NO_BUILD_DEPS=YES ghc_stage2_NO_BUILD_DEPS=YES ghc_stage3_NO_BUILD_DEPS=YES ONLY_DEPS_FOR="compiler_stage1 ghc_stage1" ===--- building final phase make -r --no-print-directory -f ghc.mk phase=final all_ghc_stage1 libraries/old-time/ghc.mk:5: libraries/old-time/dist-install/package- data.mk: No such file or directory libraries/haskell98/ghc.mk:5: libraries/haskell98/dist-install/package- data.mk: No such file or directory libraries/haskell2010/ghc.mk:5: libraries/haskell2010/dist-install /package-data.mk: No such file or directory libraries/random/ghc.mk:5: libraries/random/dist-install/package-data.mk: No such file or directory libraries/primitive/ghc.mk:5: libraries/primitive/dist-install/package- data.mk: No such file or directory libraries/vector/ghc.mk:5: libraries/vector/dist-install/package-data.mk: No such file or directory libraries/dph/dph-base/ghc.mk:5: libraries/dph/dph-base/dist-install /package-data.mk: No such file or directory libraries/dph/dph-prim-interface/ghc.mk:5: libraries/dph/dph-prim- interface/dist-install/package-data.mk: No such file or directory libraries/dph/dph-prim-seq/ghc.mk:5: libraries/dph/dph-prim-seq/dist- install/package-data.mk: No such file or directory libraries/dph/dph-prim-par/ghc.mk:5: libraries/dph/dph-prim-par/dist- install/package-data.mk: No such file or directory libraries/dph/dph-lifted-base/ghc.mk:5: libraries/dph/dph-lifted-base /dist-install/package-data.mk: No such file or directory libraries/dph/dph-lifted-boxed/ghc.mk:5: libraries/dph/dph-lifted-boxed /dist-install/package-data.mk: No such file or directory libraries/dph/dph-lifted-copy/ghc.mk:5: libraries/dph/dph-lifted-copy /dist-install/package-data.mk: No such file or directory libraries/dph/dph-lifted-vseg/ghc.mk:5: libraries/dph/dph-lifted-vseg /dist-install/package-data.mk: No such file or directory libraries/ghc-prim/ghc.mk:4: libraries/ghc-prim/dist-install/package- data.mk: No such file or directory libraries/integer-gmp/ghc.mk:4: libraries/integer-gmp/dist-install /package-data.mk: No such file or directory libraries/base/ghc.mk:4: libraries/base/dist-install/package-data.mk: No such file or directory libraries/filepath/ghc.mk:4: libraries/filepath/dist-install/package- data.mk: No such file or directory libraries/array/ghc.mk:4: libraries/array/dist-install/package-data.mk: No such file or directory libraries/deepseq/ghc.mk:4: libraries/deepseq/dist-install/package- data.mk: No such file or directory libraries/bytestring/ghc.mk:4: libraries/bytestring/dist-install/package- data.mk: No such file or directory libraries/containers/ghc.mk:4: libraries/containers/dist-install/package- data.mk: No such file or directory libraries/old-locale/ghc.mk:4: libraries/old-locale/dist-install/package- data.mk: No such file or directory libraries/time/ghc.mk:4: libraries/time/dist-install/package-data.mk: No such file or directory libraries/unix/ghc.mk:4: libraries/unix/dist-install/package-data.mk: No such file or directory libraries/directory/ghc.mk:4: libraries/directory/dist-install/package- data.mk: No such file or directory libraries/process/ghc.mk:4: libraries/process/dist-install/package- data.mk: No such file or directory libraries/hpc/ghc.mk:4: libraries/hpc/dist-install/package-data.mk: No such file or directory libraries/pretty/ghc.mk:4: libraries/pretty/dist-install/package-data.mk: No such file or directory libraries/template-haskell/ghc.mk:4: libraries/template-haskell/dist- install/package-data.mk: No such file or directory libraries/Cabal/Cabal/ghc.mk:4: libraries/Cabal/Cabal/dist-install /package-data.mk: No such file or directory libraries/binary/ghc.mk:4: libraries/binary/dist-install/package-data.mk: No such file or directory libraries/bin-package-db/ghc.mk:4: libraries/bin-package-db/dist-install /package-data.mk: No such file or directory libraries/hoopl/ghc.mk:4: libraries/hoopl/dist-install/package-data.mk: No such file or directory libraries/transformers/ghc.mk:4: libraries/transformers/dist-install /package-data.mk: No such file or directory libraries/xhtml/ghc.mk:4: libraries/xhtml/dist-install/package-data.mk: No such file or directory libraries/terminfo/ghc.mk:4: libraries/terminfo/dist-install/package- data.mk: No such file or directory libraries/haskeline/ghc.mk:4: libraries/haskeline/dist-install/package- data.mk: No such file or directory libraries/integer-gmp/gmp/ghc.mk:49: libraries/integer-gmp/gmp/config.mk: No such file or directory utils/hsc2hs/ghc.mk:16: utils/hsc2hs/dist-install/package-data.mk: No such file or directory utils/ghc-pkg/ghc.mk:66: utils/ghc-pkg/dist-install/package-data.mk: No such file or directory utils/dll-split/ghc.mk:18: utils/dll-split/dist-install/package-data.mk: No such file or directory utils/ghc-pwd/ghc.mk:8: utils/ghc-pwd/dist-install/package-data.mk: No such file or directory utils/ghc-cabal/ghc.mk:67: utils/ghc-cabal/dist-install/package-data.mk: No such file or directory utils/hpc/ghc.mk:18: utils/hpc/dist-install/package-data.mk: No such file or directory utils/runghc/ghc.mk:28: utils/runghc/dist-install/package-data.mk: No such file or directory utils/mkUserGuidePart/ghc.mk:18: utils/mkUserGuidePart/dist/package- data.mk: No such file or directory utils/compare_sizes/ghc.mk:8: utils/compare_sizes/dist-install/package- data.mk: No such file or directory make[2]: *** No rule to make target `libraries/integer-gmp/gmp/config.mk'. Stop. make[1]: *** [all_ghc_stage1] Error 2 make: *** [1] Error 2 }}} Using `make stage=1` works fine, but computing the dependencies each time is annoying. In past experience, I've seen that, once the stage-1 compiler builds to completion at least once, `make 1` works just fine -- it just fails after a `clean`. I don't recall having this problem with `make 2`. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8709> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 2

[GHC] #8206: Add support for Portable Native Client
by GHC 05 Jul '15

05 Jul '15

#8206: Add support for Portable Native Client -------------------------------------------------+------------------------- Reporter: guest | Owner: Alex Type: feature request | Sayers Priority: normal | Status: new Component: Compiler | Milestone: Keywords: NaCl PNaCl Portable Native | Version: Client pexe | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Project (more than a week) | Type of failure: Blocked By: | None/Unknown Related Tickets: | Test Case: | Blocking: -------------------------------------------------+------------------------- == Motivation == [http://www.chromium.org/nativeclient/pnacl/building-and-testing-portable- native-client Portable Native Client] (PNaCl) is a feature in Google Chrome which (roughly) allows it to use LLVM bitcode like browsers use javascript today. The bitcode is downloaded, validated, compiled, and (safely) executed, with access to an API for manipulating the DOM of the page which loaded it. The dream: Haskell executed in the browser at near- native speed. Unfortunately, while GHC has an LLVM backend, the bitcode it generates doesn't satisfy the PNaCl validator. == Portable Native Client == The user visits a page with an <embed> tag pointing to a "pexe" - a PNaCl bitcode file. The bitcode is downloaded and streamed first into a code validator, and then into a compiler. The resulting machine code is then executed as a memory-protected process. The [https://developers.google.com /native-client/pepperc/ Pepper API], a library Google provides, provides access to the browser for things like connecting to websockets, playing audio, and communicating with javascript running on the page. PNaCl is present in Chrome 29 (go to chrome://flags to enable it), and will be enabled for arbitrary sources (the "open web") in Chrome 30. Mozilla have announced that they don't intend to support Native Client. == The Easily-Fixed == The pexe bitcode format is a frozen subset of LLVM bitcode. The PNaCl toolchain provides `pnacl-finalize`, which translates LLVM bitcode into pexe bitcode. PNaCl [http://www.chromium.org/nativeclient/pnacl/bitcode- abi##callingconventions only allows] the standard "ccc" calling convention, whereas GHC likes to use its own "cc 10" calling convention. You can make GHC use ccc by using an unregisterised build, for a slow-down factor of about 2. It seems likely that code-next-to-tables will upset the validator. If so, this can be turned off for a small performance hit. == The Not-So-Easily-Fixed == The validator requires that requests for IO are sent to Pepper. PNaCl also requires that you use newlib instead of glibc. Spawning new processes is forbidden (although creating pthreads is fine). It also seems likely that the validator with take umbrage at calls to `mmap`, which the GHC runtime uses to request memory allocation. It seems, therefore, that significant chunks of the RTS will have to be ported. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8206> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 7

[GHC] #8353: Easy way to defer type errors
by GHC 04 Jul '15

04 Jul '15

#8353: Easy way to defer type errors ------------------------------------+------------------------------------- Reporter: goldfire | Owner: Type: feature request | Status: new Priority: normal | Milestone: Component: GHCi | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- A number of comments I've heard recently have focused on the joy of `-fdefer-type-errors`, especially for newcomers to Haskell. However, in GHCi, one has to 1. be aware that `-fdefer-type-errors` exists 2. know the `:set ...` syntax to turn it on, and then 3. is stuck with this setting on until they turn it off Instead, I propose new `:load!` and `:reload!` commands (abbreviated to `:l!` and `:r!`) which turn on `-fdefer-type-errors` just for that one command. When a load or reload fails, the error message could suggest these alternate forms. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8353> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 10

[GHC] #8881: No way to unsubscribe a bug
by GHC 04 Jul '15

04 Jul '15

#8881: No way to unsubscribe a bug ------------------------------------+------------------------------------- Reporter: nomeata | Owner: hvr Type: feature request | Status: new Priority: normal | Milestone: Component: Trac & Git | Version: Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- The current trac settings are so that when I comment on a bug, I am automatically subscribed to it. This is good, but there should be way to unsubscribe from a bug as well. Also, and I’m not sure if this is the same thing or not, if I put myself in the “Observer” list (possibly wrong translation), I cannot undo that. Generally, we might give our users more permissions, e.g. to edit ticket descriptions (and not just the summary). -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8881> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 4

[GHC] #8620: build of head on Mac 10.9 with xcode 5 fails with
by GHC 03 Jul '15

03 Jul '15

#8620: build of head on Mac 10.9 with xcode 5 fails with ----------------------------------+--------------------------------- Reporter: George | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.3 Keywords: | Operating System: MacOS X Architecture: x86_64 (amd64) | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ----------------------------------+--------------------------------- make -j3 fails with Configuring ghc-bin-7.7.20131217... Warning: 'data-dir: ..' is a relative path outside of the source tree. This will not work when generating a tarball with 'sdist'. ghc.mk:100: *** Make has restarted itself 2 times; is there a makefile bug? See http://ghc.haskell.org/trac/ghc/wiki/Building/Troubleshooting#Makehasrestar… for details. Stop. make: *** [all] Error 2 -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8620> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 13

[GHC] #8363: Order matters for unused import warnings when reexporting identifiers
by GHC 01 Jul '15

01 Jul '15

#8363: Order matters for unused import warnings when reexporting identifiers ------------------------------------+------------------------------------- Reporter: bergmark | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.7 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- Import order seem to change whether unused import warnings trigger when a module re-exports an identifier, with another module importing it and another module exporting the same identifier. Reproduction: {{{ module Foo ( (<$>) , g ) where import Control.Applicative g :: Int g = 1 }}} {{{ module Main where import Control.Applicative import Foo main :: IO () main = print =<< ((+2) <$> return g) }}} {{{ $ ghc -fwarn-unused-imports Main.hs [1 of 2] Compiling Foo ( Foo.hs, Foo.o ) [2 of 2] Compiling Main ( Main.hs, Main.o ) Linking Main ... }}} If Main is not using `g` then this gives a warning that the import of `Foo` is redundant. If we switch the order of the imports we do get the warning: {{{ module Main where import Foo import Control.Applicative main :: IO () main = print =<< ((+2) <$> return g) }}} {{{ > ghc -fwarn-unused-imports Main.hs [1 of 2] Compiling Foo ( Foo.hs, Foo.o ) [2 of 2] Compiling Main ( Main.hs, Main.o ) Main.hs:4:1: Warning: The import of `Control.Applicative' is redundant except perhaps to import instances from `Control.Applicative' To import instances alone, use: import Control.Applicative() Linking Main ... }}} I expected both versions of Main to produce the same warning. Tested on GHC 7.7.20130824 and 7.4.2. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8363> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 4

[GHC] #8222: CTYPE pragma on newtype is ignored
by GHC 01 Jul '15

01 Jul '15

#8222: CTYPE pragma on newtype is ignored --------------------------+------------------------------------------------ Reporter: akio | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: | Version: 7.6.3 Compiler | Operating System: Linux Keywords: | Type of failure: Incorrect result at runtime Architecture: x86_64 | Test Case: (amd64) | Blocking: Difficulty: | Unknown | Blocked By: | Related Tickets: | --------------------------+------------------------------------------------ User's guide includes an example where a CTYPE pragma is used for a newtype. {{{ newtype {-# CTYPE "useconds_t" #-} T = ... }}} However, in the following program, the CTYPE pragma seems to be ignored: {{{ {-# LANGUAGE CApiFFI #-} import Foreign.Ptr foreign import capi unsafe "sys/socket.h CMSG_DATA" c_CMSG_DATA :: Ptr Cmsg -> Ptr a newtype {-# CTYPE "sys/socket.h" "struct cmsghdr" #-} Cmsg = Cmsg () main = return () }}} Save this as {{{capi.hs}}}, then compile it like: {{{ ghc capi.hs -fforce-recomp -keep-tmp-files -tmpdir . }}} Then GHC creates a C file: {{{ #define IN_STG_CODE 0 #include "Rts.h" #include "Stg.h" #ifdef __cplusplus extern "C" { #endif #include <sys/socket.h> void* ghczuwrapperZC0ZCmainZCMainZCCMSGzuDATA(void* a1) {return CMSG_DATA(a1);} #ifdef __cplusplus } #endif }}} The argument type of the wrapper function is {{{void *}}}, but it should be {{{struct cmsghdr *}}}. If I replace {{{newtype}}} with {{{data}}} in capi.hs, the wrapper function gets the correct type. I can see this problem in HEAD and in 7.6.3. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8222> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 2

[GHC] #8144: Interface hashes include time stamp of included .h file when CPP is used
by GHC 25 Jun '15

25 Jun '15

#8144: Interface hashes include time stamp of included .h file when CPP is used -------------------------+------------------------------------------------- Reporter: nh2 | Owner: Type: bug | Status: new Priority: | Milestone: normal | Version: 7.6.3 Component: | Operating System: Unknown/Multiple Compiler | Type of failure: Compile-time performance bug Keywords: | Test Case: Architecture: | Blocking: Unknown/Multiple | Difficulty: | Unknown | Blocked By: | Related Tickets: | -------------------------+------------------------------------------------- See https://github.com/nh2/ghc-bug-time-dependent-interface-hashes for a fast test case. Having '''Test.hs''': {{{ {-# LANGUAGE CPP #-} module Test () where }}} and an empty '''cabal_macros.h''', {{{ touch cabal_macros.h ghc -c Test.hs -optP-include -optPcabal_macros.h }}} will generate you a different interface hash ''most of the time'' in '''ghc --show-iface Test.hi'''. It looks like the modification time of the .h file makes it into the interface hash, but only at second resolution, and you get ''compilation IS NOT required'' if you manage to run it twice per second. I think the interface hash should be independent from the time stamp of the header file. This bug can trigger unnecessary recompilation and makes compilations with identical inputs non-deterministic. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8144> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 34

[GHC] #8785: Replace hooks API in the RTS with something better
by GHC 16 Jun '15

16 Jun '15

#8785: Replace hooks API in the RTS with something better ------------------------------------+------------------------------------- Reporter: simonmar | Owner: simonmar Type: task | Status: new Priority: high | Milestone: 7.10.1 Component: Runtime System | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- Hooks rely on static linking behaviour which doesn't always work: we have to disable -Bsymbolic for the RTS on Linux (see `compiler/main/SysTools.lhs`) and it apparently doesn't work at all on Mac (#8754). So instead of hooks we should be passing in information when we initialize the RTS, like we already do for some other things (`-rtsopts` etc.). -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8785> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 3