August 2014 - ghc-tickets

[GHC] #8919: Why is xhtml library installed but not exported to users?
by GHC 20 Sep '17

20 Sep '17

#8919: Why is xhtml library installed but not exported to users? ------------------------------------+------------------------------------- Reporter: simons | Owner: Type: bug | Status: new Priority: normal | Milestone: 7.8.1 Component: Build System | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: Other Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- GHC 7.8.1-rc2 installs the xhtml library, but doesn't export it, i.e. it's completely invisible to users. Is there a particular reason why this setup is necessary? If GHC needs that library internally anywhere, would it be possible to link it statically and *not* install it? Or, if that's not possible, if the library needs to be installed, please make it visible to users. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8919> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 27

[GHC] #9281: Rewrite `integer-gmp` to use only non-allocating GMP functions
by GHC 20 Sep '17

20 Sep '17

#9281: Rewrite `integer-gmp` to use only non-allocating GMP functions -------------------------------------+------------------------------------- Reporter: hvr | Owner: hvr Type: task | Status: new Priority: normal | Milestone: 7.10.1 Component: libraries (other) | Version: Keywords: integer-gmp | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | -------------------------------------+------------------------------------- After some promising results with a proof-of-concept implementation, I'm optimistic we can rewrite `integer-gmp` to use only non-allocating GMP lib functions without suffering from serious regressions. If successful, this would - allow to avoid the custom GMP allocator hack, and thus - avoid issues when linking against other C libraries using GMP, - simplify code, as we would perform all heap allocations in Haskell code (and never inside Cmm/C code as its done now), - and finally maybe even remove a few more superfluous temporary heap allocations. This rewrite can be done incrementally. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9281> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 32

[GHC] #9157: cmm common block not eliminated
by GHC 20 Sep '17

20 Sep '17

#9157: cmm common block not eliminated ------------------------------------+------------------------------------- Reporter: wojteknar | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.2 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: Other Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- For the toTuple# function (in the attached file) GHC generates a cmm switch statement, with all the alternatives, unsurprisingly, the same. Yet, cmm common block elimination does not kick in. In this particular example, the whole case statement could be annihilated, because all alternatives lead to the same code. BTW, this is how they match in France. {{{ #!ocaml type alt = A of int | B of int | C of int | D of int let g x = match x with A v | B v | C v | D v -> v }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9157> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 12

[GHC] #8091: retry# lacks strictness information
by GHC 14 Sep '17

14 Sep '17

#8091: retry# lacks strictness information ------------------------------------+------------------------------------- Reporter: parcs | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- The `retry#` primop should be marked as returning bottom since it never actually returns anything as far as the simplifier is concerned. This change would help the simplifier eliminate unreachable code inside STM transactions. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8091> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 13

[GHC] #8532: Hyperbolic arc cosine fails on (-1) :: Complex r.
by GHC 13 Sep '17

13 Sep '17

#8532: Hyperbolic arc cosine fails on (-1) :: Complex r. -------------------------------------+------------------------------------- Reporter: leftaroundabout | Owner: Type: bug | Status: new Priority: low | Milestone: Component: libraries/base | Version: 7.6.3 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: Incorrect result Difficulty: Easy (less than 1 | at runtime hour) | Test Case: acosh(-1) :: Blocked By: | Complex Double Related Tickets: | Blocking: -------------------------------------+------------------------------------- When allowing for complex results, the hyperbolic arc cosine is continuously defined on all ℝ. In the {{{(x < (-1))}}} real ray of the complex plane, {{{acosh}}} equals {{{\z -> i * pi + acosh(abs z)}}}, which works fine for almost all arguments. Thus, {{{acosh (-1)}}} should equal {{{i * pi}}}; however due to the implementation as {{{ acosh z = log (z + (z+1) * sqrt ((z-1)/(z+1))) }}} where the denominator in the root becomes zero at {{{z = -1}}}, this comes out as {{{NaN :+ NaN}}}. Could be fixed trivially by adding a special case {{{ acosh ((-1):+0) = 0:+pi }}} to the {{{instance (RealFloat a) => Floating (Complex a)}}} in {{{Data.Complex}}}. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8532> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 13

[GHC] #8583: Associated pattern synonyms
by GHC 11 Sep '17

11 Sep '17

#8583: Associated pattern synonyms ------------------------------------+------------------------------------- Reporter: cactus | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: 5144 | Blocking: Related Tickets: | ------------------------------------+------------------------------------- The PatternSynonyms wiki page has a section on (typeclass-)associated pattern synonyms: {{{ class ListLike l where pattern Nil :: l a pattern Cons :: a -> l a -> a isNil :: l a -> Bool isNil Nil = True isNil (Cons _ _) = False append :: l a -> l a -> l a instance ListLike [] where pattern Nil = [] pattern Cons x xs = x:xs append = (++) headOf :: (ListLike l) => l a -> Maybe a headOf Nil = Nothing headOf (Cons x _) = Just x }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8583> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 18

[GHC] #8317: Optimize tagToEnum# at Core level
by GHC 29 Aug '17

29 Aug '17

#8317: Optimize tagToEnum# at Core level ------------------------------------+------------------------------------- Reporter: jstolarek | Owner: Type: task | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.7 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: #6135 | ------------------------------------+------------------------------------- Old comparison primops that returned Bool were implemented by inserting call to `tagToEnum#` in the code generator. This call to `tagToEnum#` was later optimized away by a special case in the code geenrator (see [[GhcFile(compiler/codeGen/StgCmmExpr.hs)]], Note [case on bool])). Now that we have new comparison primops (see #6135) we no longer insert `tagToEnum#` in the code generator - all uses of `tagToEnum#` come from explicit calls in a source program. But we still have that special case in the code generator to optimize away `tagToEnum#`. We should drop that special case in the code generator and handle scrutinizing of `tagToEnum#` at the Core level by: 1. removing call to `tagToEnum#` in the scrutinee 2. adding calls to `dataToTag#` in case branches 3. constant-folding inserted `dataToTag#` Here is an example. This Haskell code: {{{ if tagToEnum# (a ># b) then E1 else E2 }}} will be translated to this Core: {{{ case tagToEnum# (a ># b) of True -> E1 False -> E2 }}} and optimized like this: {{{ case a ># b of dataToTag# True -> E1 dataToTag# False -> E2 }}} ====> {{{ case a ># b of 1 -> E1 0 -> E2 }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8317> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 8

[GHC] #9352: Allow `State# s` argument/result types in `ccall` FFI imports
by GHC 16 Aug '17

16 Aug '17

#9352: Allow `State# s` argument/result types in `ccall` FFI imports -------------------------------------+------------------------------------- Reporter: hvr | Owner: Type: feature request | Status: new Priority: normal | Milestone: 7.10.1 Component: Compiler (Type | Version: 7.8.2 checker) | Operating System: Keywords: | Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: Difficulty: Unknown | None/Unknown Blocked By: | Test Case: Related Tickets: #9218 | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- This ticket is to allowing code like {{{#!hs {-# LANGUAGE UnliftedFFITypes #-} {-# LANGUAGE MagicHash #-} module M where import GHC.Exts foreign import ccall unsafe "foo" c_foo :: Int# -> State# s -> State# s foreign import ccall unsafe "bar" c_foo :: Int# -> State# s -> (# State# s, Int# #) }}} See also discussion in #9218 -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9352> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 10

[GHC] #8472: Primitive string literals prevent optimization
by GHC 16 Aug '17

16 Aug '17

#8472: Primitive string literals prevent optimization ------------------------------+-------------------------------------------- Reporter: akio | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.6.3 Keywords: | Operating System: Linux Architecture: x86_64 | Type of failure: Runtime performance bug (amd64) | Test Case: Difficulty: Unknown | Blocking: Blocked By: | Related Tickets: | ------------------------------+-------------------------------------------- Using an Addr# literal seems to result in less aggressive optimization. If I compile the attached program like this: {{{ ghc -O2 -fforce-recomp -ddump-simpl addr.hs }}} the code is optimized nicely. Everything are inlined into {{{t}}}, intermediate pairs are eliminated, etc. However, when I replace the Int# literals in the code with Addr# literals by defining the {{{ADDR}}} macro: {{{ ghc -O2 -fforce-recomp -ddump-simpl -DADDR addr.hs }}} GHC now creates 2 extra top-level bindings, each of which allocates a pair. I don't see why the presence of Addr# literals should prevent inlining, so I'm reporting a bug. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8472> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 24

[GHC] #8147: Exponential behavior in instance resolution on fixpoint-of-sum
by GHC 08 Aug '17

08 Aug '17

#8147: Exponential behavior in instance resolution on fixpoint-of-sum -------------------------+------------------------------------------------- Reporter: | Owner: jkoppel | Status: new Type: bug | Milestone: Priority: | Version: 7.6.3 normal | Operating System: Unknown/Multiple Component: | Type of failure: Compile-time performance bug Compiler | Test Case: Keywords: | Blocking: performance, | Architecture: | Unknown/Multiple | Difficulty: | Unknown | Blocked By: | Related Tickets: | -------------------------+------------------------------------------------- Doing instance resolution on a fixpoint-of-sum type takes a very long time. This is possibly the same issue as issue #5642. These are the numbers I see for various n: {{{ 10 : 0.329s 20 : 0.479s 40 : 0.935s 80 : 2.821s 160 : 11.694s 320 : 1m30.39s 640: Ran for over 1 hour without terminating }}} This uses a couple of attached support files. Apologies for not being able to reduce further. {{{ -- Test.hs {-# LANGUAGE MultiParamTypeClasses, FlexibleInstances, UndecidableInstances, OverlappingInstances, TypeOperators, DeriveFunctor, TemplateHaskell #-} module Test where import Control.Monad import Lib import TH {- With n=3, produces data X1 e = X1 e deriving (Functor) data X2 e = X2 e deriving (Functor) data X3 e = X3 e deriving (Functor) type X = X1 :+: X2 :+: X3 -} $(let n = 320 in liftM concat $ sequence [liftM concat $ mapM mkDec $ map (('X':).show) [1..n] , makeSumType "X" (map (('X':).show) [1..n])]) data Y0 e = Y0 e deriving ( Functor ) type X' = Y0 :+: X class Lift f g where lift' :: f (Fix g) -> Fix g instance (Lift f g, Lift f' g) => Lift (f :+: f') g where lift' x = case x of L e -> lift' e R e -> lift' e instance (Functor f, f :<: g) => Lift f g where lift' = In . inj cata :: (Functor f) => (f a -> a) -> Fix f -> a cata f = f . fmap (cata f) . out lift :: Fix X -> Fix X' lift = cata lift' }}} Virtually all the time is spent in compiling lift. For example, with n=640, commenting out lift makes it compile in around 2 seconds. Interestingly, when I add the following code, compilation times only increase by 10-20%. In the original code where I encountered this issue, doing so doubles compilation time. {{{ instance Lift Y0 X where lift' = undefined lower :: Fix X' -> Fix X lower = cata lift' }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8147> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 6