November 2015 - ghc-tickets

[GHC] #10686: Process stops responding to sigINT
by GHC 22 Jun '16

22 Jun '16

#10686: Process stops responding to sigINT -------------------------------------+------------------------------------- Reporter: hamish | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.10.1 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Revisions: | -------------------------------------+------------------------------------- Every now and then the leksah-server process has required a kill -9 it to get rid of it. Now Leksah is using the threaded RTS it seems to be happening in Leksah too. It is worse in Leksah because child processes inherit the behaviour and do not terminate when sent Leksah sends them sigINT (which Leksah does very frequently). Once the problem arrises it continues until the Leksah is restarted. Both leksah-server and Leksah start child processes using the process package. I think process package and the GHC GC both call blockUserSignals and it only has one place to store savedSignals. My guess is that two calls go into blockUserSignals from different threads before unblockUserSignals is called on either. The result is that when unblockUserSignals is called it does nothing (because savedSignals was overwritten). Perhaps savedSignals could use some kind of thread local storage? Also docs seem to indicate sigprocmask should not be used at all in multithreaded processes. Perhaps the GHC RTS should use pthread_sigprocmask instead? If the calling process delegates Ctrl+C the problem might be largely hidden. The sigINT signal is enabled again in the child fork and the parent will get an exception if the child is terminated with a sigINT. However I believe the parent is still left in a state where it will no longer respond to sigINT if the child process terminates normally (assuming two calls in a row were made to blockUserSignals at some point). The work around for now in Leksah is to reenable sigINT before each createProcess call. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10686> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 2

[GHC] #11081: Implement Introspective Template Haskell
by GHC 22 Jun '16

22 Jun '16

#11081: Implement Introspective Template Haskell -------------------------------------+------------------------------------- Reporter: goldfire | Owner: Type: feature | Status: new request | Priority: normal | Milestone: ⊥ Component: Template | Version: 7.10.2 Haskell | Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Rev(s): | Wiki Page: | TemplateHaskell/Introspective -------------------------------------+------------------------------------- This ticket is to track commentary and reactions to TemplateHaskell/Introspective, and to help the proposal not get lost. Contrary to the title of this ticket, it is not yet resolved that Introspective Template Haskell should ever be implemented. But with some of the support that it's gotten, it seemed appropriate to make a ticket. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/11081> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 9

[GHC] #8713: libdl, libpthread may be unwanted too
by GHC 21 Jun '16

21 Jun '16

#8713: libdl, libpthread may be unwanted too -------------------------------------+------------------------------------- Reporter: ip1981 | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: libraries/unix | Version: 7.6.3 Keywords: | Operating System: Other Architecture: x86_64 (amd64) | Type of failure: GHC doesn't work Difficulty: Moderate (less | at all than a day) | Test Case: Blocked By: | Blocking: Related Tickets: | -------------------------------------+------------------------------------- I have GHC on an unusual system [1] libdl.so.1, librt.so.1 and some others are "filter libraries": they do not provide real functions (almost all is in libc.so.1), but to make thing work libFOO.so are GNU ld linker scripts: thus linking is successful, libFOO.so.1 is not linked in :-) Unfortunately, runtime linker (ld.so.1) does not understand GNU ld linker scripts. And I get errors like this: {{{ # ghci -package unix GHCi, version 7.6.3: http://www.haskell.org/ghc/ :? for help Loading package ghc-prim ... linking ... done. Loading package integer-gmp ... linking ... done. Loading package base ... linking ... done. Loading package array-0.4.0.1 ... linking ... done. Loading package deepseq-1.3.0.1 ... linking ... done. Loading package bytestring-0.10.0.2 ... linking ... done. Loading package old-locale-1.0.0.5 ... linking ... done. Loading package time-1.4.0.1 ... linking ... done. Loading package unix-2.7.0.0 ... <command line>: can't load .so/.DLL for: /usr/lib/gcc/x86_64-pc-solaris2.11/4.7/../../../x86_64-illumos/libdl.so (ld.so.1: ghc: fatal: /usr/lib/gcc/x86_64-pc- solaris2.11/4.7/../../../x86_64-illumos/libdl.so: unknown file type) }}} The unix package v2.6 had the same issue with librt.so too, in version 2.7 libdl.so remains. I use the attached patch for GHC 7.6.3 to fix this issue. In general I suggest to use AC_SEARCH_LIBS instead of AC_CHECK_LIB [1] http://osdyson.org -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8713> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 18

[GHC] #9646: Strange performance bug
by GHC 20 Jun '16

20 Jun '16

#9646: Strange performance bug -------------------------------------+------------------------------------- Reporter: erikd | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.3 Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Unknown | Type of failure: Runtime Blocked By: | performance bug Related Tickets: | Test Case: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- I've been chasing a weird performance bug for about a week now. I've reduced the testcase to the following git repo: https://github.com/erikd/ghc-perfbug-test The Readme.md file in that repo contains an explanation of how to reproduce the issue. The benchmark program in the repo uses Criterion to test the performance of one particular function. Running the program in a particular way results into two significanlty different results. The commands are: {{{ make clean bench-integer.html cp -f bench-integer.html bench-integer-slow.html touch New3/GHC/Integer/Natural.hs && make bench-integer.html }}} The results for one function in the file `New3/GHC/Integer/Natural.hs` is 8 times slower in the first test that the second while the other test function always executes at about the speed. I haven't been able to test this with ghc-7.6.3 because the code uses `isTrue#` which isn't available in 7.6.3. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9646> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 26

[GHC] #9682: Implement "Add bifunctor related classes to base"-Proposal
by GHC 18 Jun '16

18 Jun '16

#9682: Implement "Add bifunctor related classes to base"-Proposal -------------------------------------+------------------------------------- Reporter: hvr | Owner: ekmett Type: task | Status: new Priority: normal | Milestone: 7.10.1 Component: Core Libraries | Version: Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Moderate (less | Type of failure: than a day) | None/Unknown Blocked By: | Test Case: Related Tickets: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- See [http://www.haskell.org/pipermail/libraries/2014-April/022844.html original libraries@ proposal] for more details -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9682> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 10

[GHC] #10448: Implement rest of "Add bifunctor related classes to base"-Proposal
by GHC 18 Jun '16

18 Jun '16

#10448: Implement rest of "Add bifunctor related classes to base"-Proposal -------------------------------------+------------------------------------- Reporter: hvr | Owner: ekmett Type: task | Status: new Priority: normal | Milestone: 7.12.1 Component: | Version: libraries/base | Operating System: Unknown/Multiple Keywords: | Type of failure: None/Unknown Architecture: | Blocked By: Unknown/Multiple | Related Tickets: #9682 Test Case: | Blocking: | Differential Revisions: Phab:D336 | -------------------------------------+------------------------------------- Cloned from #9682: ---- See [http://www.haskell.org/pipermail/libraries/2014-April/022844.html original libraries@ proposal] for more details -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10448> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 9

[GHC] #10382: Template Haskell quotes should work with stage 1 compiler
by GHC 18 Jun '16

18 Jun '16

#10382: Template Haskell quotes should work with stage 1 compiler -------------------------------------+------------------------------------- Reporter: ezyang | Owner: ezyang Type: feature | Status: new request | Milestone: 7.12.1 Priority: normal | Version: 7.11 Component: Template | Operating System: Unknown/Multiple Haskell | Type of failure: None/Unknown Keywords: | Blocked By: Architecture: | Related Tickets: Unknown/Multiple | Test Case: | Blocking: | Differential Revisions: | -------------------------------------+------------------------------------- Right now, you must enable the `TemplateHaskell` extension to use quotes, and `TemplateHaskell` is not supported by the stage 1 compiler. But there actually is no good reason why this should be the case: quoting doesn't require any user-written code to be loaded up and run, so it should be doable by the stage 1 compiler. I propose adding a new extension, `Quotation`, which turns on JUST quotation and works with the stage 1 compiler. This will solve len's problem https://github.com/ekmett/lens/issues/496 where they want to rename some syntax using quotation, but don't want break compilation on a stage 1 compiler. See also #10279. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10382> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 27

[GHC] #9525: +RTS -xc stack trace sometimes reported twice
by GHC 16 Jun '16

16 Jun '16

#9525: +RTS -xc stack trace sometimes reported twice -------------------------------------+------------------------------------- Reporter: osa1 | Owner: osa1 Type: bug | Status: new Priority: low | Milestone: Component: Runtime System | Version: 7.8.3 Keywords: profiling, stack | Operating System: trace, error | Unknown/Multiple Architecture: x86_64 (amd64) | Type of failure: Incorrect Difficulty: Unknown | result at runtime Blocked By: | Test Case: Related Tickets: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- Not sure if really a bug but just wanted to show. If this is a bug I'm hoping to fix this myself but I may need some guidance. Stack trace reported by `+RTS -xc` is sometimes printed twice. This program reports it only once, as expected: {{{#!haskell f :: Int -> Int f = error "hello" main = print (f 20) }}} {{{ ➜ ghc_patch ./error +RTS -xc *** Exception (reporting due to +RTS -xc): (THUNK_1_0), stack trace: Main.f, called from Main.CAF --> evaluated by: Main.main, called from Main.CAF error: hello }}} But if I change it to this: {{{#!haskell f :: Int -> Int f x = let x = x + 20 in x main = print (f 20) }}} Stack trace is reported twice: {{{ ➜ ghc_patch ./error +RTS -xc *** Exception (reporting due to +RTS -xc): (THUNK_STATIC), stack trace: Main.f.x, called from Main.f, called from Main.main, called from Main.CAF *** Exception (reporting due to +RTS -xc): (THUNK_STATIC), stack trace: Main.f.x, called from Main.f, called from Main.main, called from Main.CAF error: <<loop>> }}} Can anyone confirm that this is really a bug? -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9525> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 2

[GHC] #8825: ghc can't determine gcc version on ru_RU locale
by GHC 14 Jun '16

14 Jun '16

#8825: ghc can't determine gcc version on ru_RU locale ------------------------------------+------------------------------------- Reporter: slyfox | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.1-rc1 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- Current ghc spits warnings time to time: {{{ <no location info>: Warning: Couldn't figure out linker information! Make sure you're using GNU gcc, or clang }}} It's because my default locale is '''LANG=ru_RU.UTF-8''' [1] {{{ ... gcc версия 4.8.2 (Gentoo 4.8.2-r1 p1.4-ssptest, pie-0.5.9-ssptest) }}} versus '''LANG=C''' {{{ ... gcc version 4.8.2 (Gentoo 4.8.2-r1 p1.4-ssptest, pie-0.5.9-ssptest) }}} [1]: {{{ $ gcc -v Используются внутренние спецификации. COLLECT_GCC=/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.2/gcc COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-pc-linux-gnu/4.8.2/lto-wrapper Целевая архитектура: x86_64-pc-linux-gnu Параметры конфигурации: /subvolumes/var_tmp/portage/sys- devel/gcc-4.8.2-r1/work/gcc-4.8.2/configure --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/usr --bindir=/usr/x86_64-pc-linux- gnu/gcc-bin/4.8.2 --includedir=/usr/lib/gcc/x86_64-pc-linux- gnu/4.8.2/include --datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.2 --mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.2/man --infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.2/info --with-gxx- include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.8.2/include/g++-v4 --with- python-dir=/share/gcc-data/x86_64-pc-linux-gnu/4.8.2/python --enable- languages=c,c++,fortran --enable-obsolete --enable-secureplt --disable- werror --with-system-zlib --enable-nls --without-included-gettext --enable-checking=release --with-bugurl=https://bugs.gentoo.org/ --with- pkgversion='Gentoo 4.8.2-r1 p1.4-ssptest, pie-0.5.9-ssptest' --enable- libstdcxx-time --enable-shared --enable-threads=posix --enable- __cxa_atexit --enable-clocale=gnu --enable-multilib --with-multilib- list=m32,m64 --disable-altivec --disable-fixed-point --enable-targets=all --disable-libgcj --enable-libgomp --disable-libmudflap --disable-libssp --enable-lto --without-cloog Модель многопоточности: posix gcc версия 4.8.2 (Gentoo 4.8.2-r1 p1.4-ssptest, pie-0.5.9-ssptest) }}} [2]: While LANG=C output: {{{ $ LANG=C gcc -v Using built-in specs. COLLECT_GCC=/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.2/gcc COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-pc-linux-gnu/4.8.2/lto-wrapper Target: x86_64-pc-linux-gnu Configured with: /subvolumes/var_tmp/portage/sys- devel/gcc-4.8.2-r1/work/gcc-4.8.2/configure --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/usr --bindir=/usr/x86_64-pc-linux- gnu/gcc-bin/4.8.2 --includedir=/usr/lib/gcc/x86_64-pc-linux- gnu/4.8.2/include --datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.2 --mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.2/man --infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.2/info --with-gxx- include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.8.2/include/g++-v4 --with- python-dir=/share/gcc-data/x86_64-pc-linux-gnu/4.8.2/python --enable- languages=c,c++,fortran --enable-obsolete --enable-secureplt --disable- werror --with-system-zlib --enable-nls --without-included-gettext --enable-checking=release --with-bugurl=https://bugs.gentoo.org/ --with- pkgversion='Gentoo 4.8.2-r1 p1.4-ssptest, pie-0.5.9-ssptest' --enable- libstdcxx-time --enable-shared --enable-threads=posix --enable- __cxa_atexit --enable-clocale=gnu --enable-multilib --with-multilib- list=m32,m64 --disable-altivec --disable-fixed-point --enable-targets=all --disable-libgcj --enable-libgomp --disable-libmudflap --disable-libssp --enable-lto --without-cloog Thread model: posix gcc version 4.8.2 (Gentoo 4.8.2-r1 p1.4-ssptest, pie-0.5.9-ssptest) }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8825> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 13

[GHC] #10117: Change the scheme for reporting redundant imports
by GHC 14 Jun '16

14 Jun '16

#10117: Change the scheme for reporting redundant imports -------------------------------------+------------------------------------- Reporter: simonpj | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.4 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Blocked By: Test Case: | Related Tickets: Blocking: | Differential Revisions: | -------------------------------------+------------------------------------- The current scheme for reporting redundant imports is given on the [wiki:Commentary/Compiler/UnusedImports unused imports page]. [wiki:Migration/7.10#GHCsaysTheimportof...isredundant The 7.10 migration page] describes a hack to avoid redundant-import warnings during migration, without using CPP. The hack works for {{{ module Foo (Int, Word, Monoid(..)) where import Data.Monoid import Data.Word import Prelude }}} (the hack is putting `import Prelude` at the bottom). To understand why, read the specification on the [wiki:Commentary/Compiler/UnusedImports unused imports page]. But it fails for {{{ module Foo (Int, Word, Monoid(..)) where import Data.Monoid (Monoid(..)) import Data.Word (Word) import Prelude }}} because the specification treats itemised imports like `import Data.Word(Word)` differently to "import all" imports. The question: '''is there alternative spec (vs the one on the [wiki:Commentary/Compiler/UnusedImports unused imports page]) that would support the behaviour desired here, without having other undesirable consequences?''' -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10117> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 10