- Haskell-Cafe - Haskell.org

Boulder Haskell Programmers, Next Meeting July 17
by Peter Jones 09 Jul '13

09 Jul '13

The Boulder Haskell Programmer Group is getting together on July 17 at 6:30pm. All experience levels are welcome. Agenda: * 6:30--7:00: Social/beer time. * 7:00--7:30: What do we want from this group? * 7:30--8:30: Introduction to Haskell Types. * 8:30--9:00: Whatever! http://www.meetup.com/Boulder-Haskell-Programmers/events/125427022/ -- Peter Jones, Founder, Devalot.com Defending the honor of good code

1 0

Open Source project suitable for 2-3 persons this fall?
by Anders Bech Mellson 09 Jul '13

09 Jul '13

Is there any project that needs working this fall which could be used as a university project? I am in the university (M.Sc. in software development), so I am mainly looking for project ideas (preferably concrete ones). We are 2-3 students that have ~10 hours pr week for 3 months to work on a project. Is there a listing somewhere with project ideas for contributing to the Haskell community? Thanks in advance, Anders

6 5

ERP/CRM solution with Haskell ?
by Loïc Maury 09 Jul '13

09 Jul '13

Hello all, I don't know if it's the good mailing list to post, if not my apologize for that. I am actually looking for an ERP/CRM solution. Is there a solution (like dolibarr or openerp), but in Haskell to do that ? Thank you Loïc

1 0

Harder Question - Chapter 4 - 4.12 - haskell the craft of functional programming - Second Edition
by Manoel Menezes 09 Jul '13

09 Jul '13

Hi everybody! I am trying to solve the question for a long time: [*4.12 Harder] Find out the maximum number of pieces we can get by making a given* *number of flat (that is planar) cuts through a solid block. It is not the same* *answer as we calculated for straight-line cuts of a flat piece of paper.* I find out that this function has the following results: f 0 = 1 f 1 = 2 f 2 = 4 f 3 = 8 That is, from 0 to 3, the flat cuts all the pieces in two other pieces, so the number of pieces is doubled. But, starting from f 4, the flat can not cuts all the pieces, in case of f 4, the flat can cut 6 out of the 8 pieces, resulting in 12 pieces plus 2 pieces 2 = 14 pieces. But I can not reach a general case. Can anybody help me to find out the solution? Thank you very much! Manoel Menezes. __________________________________ Manoel Messias da Silva Menezes Jr M.Sc.in Computer Science Federal University of Pernambuco System Analyst - Petrobras

2 1

Probabilistic functional programming with Baysig/BayesHive
by Tom Nielsen 09 Jul '13

09 Jul '13

Dear cafe, I would like to announce that the Baysig programming language and the BayesHive analytics environment (http://bayeshive.com) are now available for beta testers. Baysig is a new probabilistic, functional and typed programming language that attempts to realise the vision of "fully Bayesian computing". That is, in Baysig almost all the work in data processing consists of building a probabilistic model of the incoming data. Almost everything else -- optimal decisions, categorisation, measuring hidden parameters or states, forecasting, testing hypothesis -- becomes trivial. This paradigm can in principle be applied to a large number of domains, although for the moment we are focusing on models that are based on continuous parameters. It will therefore be of interest to users of statistics and dynamical systems models, including in finance, physics and life sciences. To analyse data in Baysig, you write a program in the random-number supply monad that generates simulated data. A special construct, "estimate", then applies Bayes' theorem to this program and returns the probability distribution of the model parameters given observed data. The "estimate" procedure is difficult to implement in Haskell or similar languages, which encouraged us to develop a new language. However, in many respects Baysig should feel like Haskell, and we hope that Baysig will encourage the Haskell community to experiment with statistical modelling. We have built a web-based environment to help users, including those with little-to-no programming experience, use Baysig, at bayeshive.com. This web application allows you to upload data from spreadsheets or timeseries, and to build statistical models with a point-and-click web interface which ends up generating Baysig code. Code and the results of running it are collected in shareable and editable literate programming documents. We would appreciate any feedback from the Haskell community before releasing our platform to unsuspecting statisticians and researchers. Almost everything is written in Haskell, including the Baysig compiler. The BayesHive website is written using Yesod, with which we are mostly happy. We also use the Stan package (mc-stan.org) and the web front-end is written using AngularJS. For the moment the Baysig language is only available through the BayesHive web interface, but that will change. If you want to run Baysig on your own computer, please send me an email at tomn(a)openbrain.org. Finally, both the BayesHive web application and the Baysig language implementation are still prototypes and very much work-in-progress. We promise to work hard at fixing the bugs you find! Links: BayesHive, including a few videos: http://bayeshive.com Baysig quick tour ("QuickBAYSIG"): http://bayeshive.com/helppage/Baysig%20quick%20tour:%20fundamentals More documentation: http://bayeshive.com/help Regards, Tom Nielsen OpenBrain Ltd.

2 1

GHC trac
by Marios Titas 09 Jul '13

09 Jul '13

I just noticed that the GHC trac was moved to http://ghc.haskell.org/trac/ghc/ and I cannot login with my old credentials. Were the old accounts transferred to the new trac? Also, the registration page [1] does not work. [1] http://ghc.haskell.org/trac/ghc/register

1 1

Parsec error message not making any sense
by Fredrik Karlsson 09 Jul '13

09 Jul '13

Dear list, I have a Parsec parser that fails and gives the following error message: *Main> parseFromFile textgridfile testFile Left "/Users/frkkan96/Documents/src/ume/umecore/testing/testdata/testdata.TextGrid" (line 35, column 5): unexpected "t" expecting "intervals [" Now, this is perfectly understandable, but line 35, col 5 in the file being parsed looks like the supplies image - there is no 't' there. Any ideas on what is going on? The parser I am using is: data VariableLine = VariableLine String String deriving Show data TierType = IntervalTier | PointTier deriving Show data Tier = Tier String deriving Show data LabelFile = LabelFile Double Double deriving Show data Label = Label String TierType Double Double String deriving Show haskelldef = makeTokenParser haskellDef textgridfile :: Parser (LabelFile, [[Label]]) textgridfile = do h <- header ll <- many1 tier return $ (h,ll) header :: Parser LabelFile header = do string headTS1 start <- try (float haskelldef) <|> (fmap fromInteger $ integer haskelldef ) string "xmax = " end <- try (float haskelldef) <|> (fmap fromInteger $ integer haskelldef ) string "tiers? <exists> \n" string "size = " integer haskelldef string "item []:" whiteSpace haskelldef return $ LabelFile start end tier :: Parser [Label] tier = do whiteSpace haskelldef string "item [" integer haskelldef string "]:" whiteSpace haskelldef try (string "class = \"IntervalTier\"") <|> string "class = \"TextTier\"" whiteSpace haskelldef string "name = " char '"' name <- many quotedChar char '"' <?> "quote at end of cell" whiteSpace haskelldef string "xmin = " try (float haskelldef) <|> (fmap fromInteger $ integer haskelldef ) whiteSpace haskelldef string "xmax = " try (float haskelldef) <|> (fmap fromInteger $ integer haskelldef ) string "intervals: size = " <|> string "points: size = " integer haskelldef whiteSpace haskelldef labelList <- many1 (interval name) return $ labelList interval :: String -> Parser Label interval tierName = do whiteSpace haskelldef string "intervals [" integer haskelldef string "]:" whiteSpace haskelldef string "xmin = " start <- try (float haskelldef) <|> (fmap fromInteger $ integer haskelldef ) whiteSpace haskelldef string "xmax = " end <- try (float haskelldef) <|> (fmap fromInteger $ integer haskelldef ) whiteSpace haskelldef string "text = " char '"' text <- many quotedChar char '"' <?> "quote at end of cell" return $ Label tierName IntervalTier start end text which fails on the attached input file. I can't see how 't' is found?? What am I doing wrong? /Fredrik -- "Life is like a trumpet - if you don't put anything into it, you don't get anything out of it."

2 3

ANNOUNCE: Ajhc Haskell Compiler 0.8.0.7 Release
by Kiwamu Okabe 09 Jul '13

09 Jul '13

We are happy to announce Ajhc 0.8.0.7. You can program interrupt handler with Haskell language on this release. But not yet collect (big) patch sets, the changes will be merged to jhc. You can get Ajhc using "cabal install ajhc" command. The usage is found at Ajhc's project web site http://ajhc.metasepi.org/. The source code at https://github.com/ajhc/ajhc/tags. Welcome sending any bugs or your ideas to https://github.com/ajhc/ajhc/issues. ## An example of interrupt handler written with Haskell <https://github.com/ajhc/demo-cortex-m3/tree/master/stm32f3-discovery> The demo for Cortex-M4 has main context and intrrupt context. The main context waits time expire with polling counter. <https://github.com/ajhc/demo-cortex-m3/blob/master/stm32f3-discovery/hs_src…> The interrupt context is called from clock exception, and decrement counter. <https://github.com/ajhc/demo-cortex-m3/blob/master/stm32f3-discovery/hs_src…> ## Other changes * Guard StablePtr critical section. * Add _JHC_JGC_SAVING_MALLOC_HEAP option for getting smaller malloc heap. * Link forkIO to forkOS. Enjoy! :) - - - Metasepi team

5 6

Linux users needed for OpenGL extensions survey
by Brian Lewis 09 Jul '13

09 Jul '13

Hi, I'm doing a survey to find out how well various OpenGL extensions are supported, to know where to focus efforts on Haskell game software. If you run Linux on your desktop and want to help, here's how: 1.) Save the information like this: $ glxinfo > SOMENAME.glxinfo ... where SOMENAME is your name, or nickname, or the computer's name, whatever you like. If you don't have glxinfo, you might need to install mesa-utils on Ubuntu, or mesa-demos on Arch. 2.) Ensure the file contains information about OpenGL extensions supported by your graphics card. 3.) Attach it to me *off list*. If you have questions, please ask me *off list*. If there's interest, I'll make the survey results available. Thanks!

3 2

Announcing postgresql-libpq-0.8.2.3
by Leon Smith 09 Jul '13

09 Jul '13

I just fixed a fairly serious performance problem with postgresql-libpq's binding to PQescapeStringConn; in was exhibiting a non-linear slowdown when more strings are escaped and retained. https://github.com/lpsmith/postgresql-libpq/commit/adf32ff26cdeca0a12fa5965… If you are using postgresql-libpq's escapeStringConn, or a library that uses it (e.g. postgresql-simple, or persistent-postgresql), I do recommend upgrading. You may or may not see a performance improvement, depending on your particular use case, but if you do it can be quite substantial. It's not entirely clear to me what the root cause really is, but it certainly appears as though it's related to the (direct) use of mallocBytes, which was replaced with (indirect) calls to mallocForeignPtrBytes / mallocPlainForeignPtrBytes (through the bytestring package). In this case, it resulted in an asymptotic improvement in time complexity of some algorithms. Best, Leon

2 2