- xmonad - Haskell.org

Issue 563 in xmonad: xmonad-contrib build fails on MultiToggle.hs
by codesite-noreply＠google.com 01 May '14

01 May '14

Status: New Owner: ---- New issue 563 by Ian...(a)gmail.com: xmonad-contrib build fails on MultiToggle.hs http://code.google.com/p/xmonad/issues/detail?id=563 What steps will reproduce the problem? 1.cabal install --gobal xmonad-contrib [ 10 of 226] Compiling XMonad.Layout.MultiToggle ( XMonad/Layout/MultiToggle.hs, dist/build/XMonad/Layout/MultiToggle.o ) XMonad/Layout/MultiToggle.hs:162:9: Could not deduce (HList b w0) arising from the ambiguity check for '??' from the context (HList b w) bound by the type signature for (??) :: HList b w => a -> b -> HCons a b at XMonad/Layout/MultiToggle.hs:162:9-42 The type variable 'w0' is ambiguous In the ambiguity check for: forall a b w. HList b w => a -> b -> HCons a b To defer the ambiguity check to use sites, enable AllowAmbiguousTypes In the type signature for '??': (??) :: HList b w => a -> b -> HCons a b Failed to install xmonad-contrib-0.11.2 cabal: Error: some packages failed to install: xmonad-contrib-0.11.2 failed during the building phase. The exception was: ExitFailure 1 What version of the product are you using? On what operating system? Ubuntu 13.10 ghc 7.7.20131127 xmonad-contrib-0.11.2 -- You received this message because this project is configured to send all issue notifications to this address. You may adjust your notification preferences at: https://code.google.com/hosting/settings

1 8

New XMonad layout based on bspwm
by Ben Weitzman 01 May '14

01 May '14

Hi, I've written a binary space partition layout based of bspwm. Each time a window is inserted, it splits the current window into two. You can resize, rotate, and swap the leafs of the BSP tree around. Attached is the darcs patch. Cheers, Ben

3 4

Re: [xmonad] Partial-width tiling
by philip.deboer＠gmail.com 28 Apr '14

28 Apr '14

Thanks, that's exactly what I was looking for. ------Original Message------ From: Paul Fertser To: Philip (GMail) Cc: xmonad(a)haskell.org Subject: Re: [xmonad] Partial-width tiling Sent: 28 Apr 2014 2:09 AM Hi, On Sat, Apr 26, 2014 at 09:35:06PM -0400, Philip DeBoer wrote: > Is there a mode in which tiles do not fill the whole screen width, but allow > blank spaces? Please see if http://xmonad.org/xmonad-docs/xmonad-contrib/XMonad-Layout-Gaps.html can do what you want. It allows to toggle gaps as well as dynamically resize them. HTH -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:fercerpav@gmail.com Sent from my BlackBerry device on the Rogers Wireless Network

1 0

Partial-width tiling
by Philip DeBoer 28 Apr '14

28 Apr '14

Is there a mode in which tiles do not fill the whole screen width, but allow blank spaces? For example, I use the ResizableTile layout, but in order to resize windows I need multiple windows open. I would like to be able to resize a window without opening multiple windows. The use-case is for reading text --- I often find that the line-length is too long, for example on websites or even man pages. A hack is to open an xterm and use that to fill part of the space. A better solution would just fill the empty space with a transparent window (and not require another program to load!). I am not looking for tiling per se, and would be happy just to see my background in the unfilled space. Is there already a layout that would do this? Thanks for suggestions! Philip

3 2

Issue 565 in xmonad: xmonad-contrib--0.11.2 does not compile on GHC 7.8 rc2
by codesite-noreply＠google.com 07 Apr '14

07 Apr '14

Status: New Owner: ---- New issue 565 by StevensE...(a)gmail.com: xmonad-contrib--0.11.2 does not compile on GHC 7.8 rc2 http://code.google.com/p/xmonad/issues/detail?id=565 What steps will reproduce the problem? 1. Install GHC 7.8-rc2 2. cabal install --with-compiler=ghc-7.8.0.20140228 xmonad-contrib What is the expected output? What do you see instead? I expect to see a successful compile. Instead I see: Downloading xmonad-contrib-0.11.2... Configuring xmonad-contrib-0.11.2... Building xmonad-contrib-0.11.2... Preprocessing library xmonad-contrib-0.11.2... [ 1 of 226] Compiling XMonad.Util.StringProp ( XMonad/Util/StringProp.hs, dist/build/XMonad/Util/StringProp.o ) [ 2 of 226] Compiling XMonad.Util.Replace ( XMonad/Util/Replace.hs, dist/build/XMonad/Util/Replace.o ) [ 3 of 226] Compiling XMonad.Util.CustomKeys ( XMonad/Util/CustomKeys.hs, dist/build/XMonad/Util/CustomKeys.o ) [ 4 of 226] Compiling XMonad.Layout.ThreeColumns ( XMonad/Layout/ThreeColumns.hs, dist/build/XMonad/Layout/ThreeColumns.o ) [ 5 of 226] Compiling XMonad.Layout.StackTile ( XMonad/Layout/StackTile.hs, dist/build/XMonad/Layout/StackTile.o ) [ 6 of 226] Compiling XMonad.Layout.Spiral ( XMonad/Layout/Spiral.hs, dist/build/XMonad/Layout/Spiral.o ) [ 7 of 226] Compiling XMonad.Layout.Roledex ( XMonad/Layout/Roledex.hs, dist/build/XMonad/Layout/Roledex.o ) [ 8 of 226] Compiling XMonad.Layout.ResizableTile ( XMonad/Layout/ResizableTile.hs, dist/build/XMonad/Layout/ResizableTile.o ) [ 9 of 226] Compiling XMonad.Layout.OneBig ( XMonad/Layout/OneBig.hs, dist/build/XMonad/Layout/OneBig.o ) [ 10 of 226] Compiling XMonad.Layout.MultiToggle ( XMonad/Layout/MultiToggle.hs, dist/build/XMonad/Layout/MultiToggle.o ) XMonad/Layout/MultiToggle.hs:162:9: Could not deduce (HList b w0) arising from the ambiguity check for '??' from the context (HList b w) bound by the type signature for (??) :: HList b w => a -> b -> HCons a b at XMonad/Layout/MultiToggle.hs:162:9-42 The type variable 'w0' is ambiguous In the ambiguity check for: forall a b w. HList b w => a -> b -> HCons a b To defer the ambiguity check to use sites, enable AllowAmbiguousTypes In the type signature for '??': (??) :: HList b w => a -> b -> HCons a b cabal: Error: some packages failed to install: xmonad-contrib-0.11.2 failed during the building phase. The exception was: ExitFailure 1 What version of the product are you using? On what operating system? xmonad-contrib-0.11.2 Please provide any additional information below. There are two things that need to be done. Write down the incompatibility in the .cabal file for xmonad-contrib and fix this in a later version. -- You received this message because this project is configured to send all issue notifications to this address. You may adjust your notification preferences at: https://code.google.com/hosting/settings

1 1

Re: Issue 97 in xmonad: xmonad stops responding to keyboard input after running xscreensaver
by codesite-noreply＠google.com 31 Mar '14

31 Mar '14

Updates: Status: Invalid Comment #29 on issue 97 by byorgey: xmonad stops responding to keyboard input after running xscreensaver http://code.google.com/p/xmonad/issues/detail?id=97 I'm closing this since 1) it hasn't happened to me in a very long time 2) no one seems to have reported a similar problem for a year 3) it was never even clear whether this really was an xmonad problem---I suspect it wasn't. Feel free to reopen if you are having a similar issue and none of the solutions proposed in the comments work for you. -- You received this message because you are listed in the owner or CC fields of this issue, or because you starred this issue. You may adjust your issue notification preferences at: http://code.google.com/hosting/settings

1 11

HiDPI, xmonad and PyCharm
by Jonas Brunsgaard 23 Mar '14

23 Mar '14

Does any of you have a solution for using PyCharm/IntelliJ or other JetBrians programs with xmonad and HiDPI displays. I have a resolution of 2880x1800 and text and icons are totally unreadable. In Gnome 3.1x it is better and I am not sure why. I have tried to start java with java options having -Dis.hidpi=true, but with no success :/ Does anybody here have experience with such a setup or an idea how to approach the problem? Any ideas are welcome, even the long shots :) -- brunsgaard

2 1

How are you Xmonad?
by Imam Toufique 22 Mar '14

22 Mar '14

http://metafizikbilgiler.com/evrimdini/home/webpages/evrimdini.com/htdocs/p… wnyrodeo ============== Drugs instantiate sex, lies and videotapes. -- the ARs

1 0

insertPosition and floating windows
by Eyal Erez 19 Mar '14

19 Mar '14

Hi, I would like to have new windows leave the current window in place. I can achieve this with: manageHook = insertPosition Below Newer <+> composeAll myManageHook However, this causes some floating windows (e.g. vlc open file dialog) to flicker like crazy. I found the following post which claims this is an issue with composeAll, but I am a Haskell newb and don't know enough to figure out what this means. https://bbs.archlinux.org/viewtopic.php?id=94060 Could someone please help me figure this out? Thank you, -- *Eyal Erez <**oneself(a)gmail.com* <oneself(a)gmail.com>*>* There are 10 types of people, those who know binary and those who don't.

2 1

Adding side tabs to XMonad.Layout.Tabbed
by Arjun Comar 16 Mar '14

16 Mar '14

Hi all, Attached is a patch that adds side tabs to XMonad.Layout.Tabbed. It's a relatively simple change and I've added documentation for the newly added functions, keeping the same format as the equivalent functions already present in the file. Thanks, Arjun

3 6