September 2015 - ghc-tickets

[GHC] #10647: Notice about lack of SIMD support.
by GHC 12 Jul '16

12 Jul '16

#10647: Notice about lack of SIMD support. -------------------------------------+------------------------------------- Reporter: mniip | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.4 Keywords: | Operating System: Linux Architecture: x86_64 | Type of failure: Compile-time (amd64) | crash Test Case: | Blocked By: Blocking: | Related Tickets: Differential Revisions: | -------------------------------------+------------------------------------- In some cases, when SIMD primitives are used without the `-fllvm` flag, instead of giving the friendly `SIMD vector instructions require the LLVM back-end.`, GHC crashes with varying messages. The simplest example is {{{#!hs {-# LANGUAGE MagicHash #-} module Foo where import GHC.Prim data V = V Int8X16# }}} In 7.8.4 this crashes with {{{ ghc: panic! (the 'impossible' happened) (GHC version 7.8.4 for x86_64-unknown-linux): Size.intSize W128 }}} According to osa1, in HEAD this still crashes, but with {{{ ghc-stage2: panic! (the 'impossible' happened) (GHC version 7.11.20150717 for x86_64-unknown-linux): Format.intFormat W128 }}} -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10647> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 7

[GHC] #8308: Resurrect ticky code for counting constructor arity
by GHC 12 Jul '16

12 Jul '16

#8308: Resurrect ticky code for counting constructor arity ----------------------------------------------+---------------------------- Reporter: jstolarek | Owner: Type: task | Status: new Priority: normal | Milestone: Component: Profiling | Version: 7.7 Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Moderate (less than a day) | Type of failure: Other Blocked By: | Test Case: Related Tickets: | Blocking: ----------------------------------------------+---------------------------- There is a dead piece of ticky profiling code that computes histograms of data constructor arities (including tuples) and size of vector returns. The function responsible is `bumpHistogram` in [[GhcFile(compiler/codeGen/StgCmmTicky.hs)]], which masks the commented out function `bumpHistogramE`. We can improve ticky profiling by resurrecting this dead code. There are following things that need to be done: 1. Replace current no-op `bumpHistogram` with `bumpHistogramE`. Note that current implementation of `bumpHistogramE` computes constructor arity at runtime. This is unnecessary because we know arity at compile time so we can avoid runtime check by doing sth like this: {{{ bumpHistogram lbl n = do let offset = n `min` 8 emit (addToMem cLong (cmmIndexExpr cLongWidth (CmmLit (CmmLabel (mkRtsDataLabel lbl))) (CmmReg (CmmInt (fromIntegral offset) cLongWidth))) 1) }}} Note that `mkRtsDataLabel` function does not exist anymore but we should be able to replace that call with `mkCmmDataLabel rtsPackageId lbl` (speculation). 2. We need to declare arrays that will store histogram values. Declarations of variables used for storing ticky statistics are in [[GhcFile(includes/stg/Ticky.h)]]. We also need to initialize the declared array to contain only zeros. 3. Having declared the arrays we need to fix printing of computed arities. This is done in [[GhcFile(rts/Ticky.c)]]. Note that there is a lot of code that is commented out (`/* krc: comment out some of this stuff temporarily */`) or disabled with `#if FALSE` pragma. We need to resurect *some* of it. There is a `PR_HST` macro for printing one histogram entry. This seems bad. We should probably rework the part of code responsible for printing out results of historgams. 4. Current code counts arities from 0 to 8. Everything above 8 is put into the same bin as 8. This magical 8 is spread all over the code. We should declare a constant that is visible both in Haskell sources (see `bumpHistogram` in 1.) and RTS files and have all code behave properly depending on that constant - we should have loops instead of statically printing 9 elements of histogram array. 5. Some ticky functions that count arity histograms are not used. For example `tickyReturnNewCon` should probably be called by `cgConApp` like this: {{{ ; emit =<< fcode_init ; tickyReturnNewCon ; emitReturn [idInfoToAmode idinfo] } }}} The above is a an outline, which should be fairly accurate, but unexpected things may show up along the way. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8308> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 22

[GHC] #10886: Remove the magic from `Any`
by GHC 11 Jul '16

11 Jul '16

#10886: Remove the magic from `Any` -------------------------------------+------------------------------------- Reporter: goldfire | Owner: goldfire Type: task | Status: new Priority: normal | Milestone: 8.0.1 Component: Compiler | Version: 7.10.2 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Revisions: | -------------------------------------+------------------------------------- The `Any` type used to be very highly magical: a poly-kinded type in a mono-kinded world. Then it became only normally magical: a datatype with a return kind of `k` (instead of `*`). Then it became only a bit magical: a closed type family with no equations. Now that we have non-magical empty closed type families, I believe that we can remove the last bit of magic and just define {{{ type family Any :: k where { } }}} somewhere (`GHC.Types`?), wire it in (like, e.g., `Bool`), and be done with it. Objections? -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10886> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 14

[GHC] #10311: package name returned from tyConPackage is garbled
by GHC 08 Jul '16

08 Jul '16

#10311: package name returned from tyConPackage is garbled -------------------------------------+------------------------------------- Reporter: j.waldmann | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.10.1 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Blocked By: Test Case: | Related Tickets: Blocking: | Differential Revisions: | -------------------------------------+------------------------------------- I am using tyConPackage (etc.) to programmatically generate links to haddock documentation (e.g., from a typed edit widget). This is now broken: {{{ import Data.Map import Data.Typeable tyConPackage $ typeRepTyCon $ typeOf $ fromList [(1,2)] in ghc-7.8.4: "containers-0.5.5.1" in ghc-7.10.1: "conta_47ajk3tbda43DFWyeF3oHQ" }}} and I don't see how to get the actual package name. Cf. http://stackoverflow.com/questions/29638177/tyconpackage-changed-from- ghc-7-8-to-ghc-7-10 -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10311> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 11

[GHC] #9625: ghc: panic using --enable-executable-dynamic
by GHC 08 Jul '16

08 Jul '16

#9625: ghc: panic using --enable-executable-dynamic -------------------------------------+------------------------------------- Reporter: CoreyOConnor | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.3 Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Unknown | Type of failure: Compile- Blocked By: | time crash Related Tickets: | Test Case: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- (from: https://github.com/haskell/cabal/issues/2039) Using --enable-executable-dynamic leads to a ghc panic. Reproduction steps: 1. clone https://github.com/coreyoconnor/executable-dynamic-issue 2. cabal configure --enable-tests --enable-executable-dynamic 3. cabal test Expected results: Test executes and passes. Actual results: {{{ ghc: panic! (the 'impossible' happened) (GHC version 7.8.2 for x86_64 -unknown-linux): Don't understand library name verify-foo }}} Actual results varies based on the name of "verify-foo" test suite. Other names tried: "verifyFoo", "VerifyFoo". All of which also fail. Removing "--enable-executable-dynamic" results in a pass regardless of test suite name. Reproduced on GHC 7.8.2, GHC 7.8.3, Cabal 1.18, Cabal 1.20. Ubuntu. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9625> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 7

[GHC] #9078: Segfault with makeStableName
by GHC 28 Jun '16

28 Jun '16

#9078: Segfault with makeStableName ------------------------------------+------------------------------------- Reporter: robertce | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.2 Keywords: | Operating System: Unknown/Multiple Architecture: Unknown/Multiple | Type of failure: None/Unknown Difficulty: Unknown | Test Case: Blocked By: | Blocking: Related Tickets: | ------------------------------------+------------------------------------- Calling `makeStableName` on the same object many times causes a segfault. The following triggers this behaviour on both OSX and Linux-x86_64, provided it is compiled (it doesn't seem to occur if the call to `makeStableName` is interpreted). {{{ module Main where import Control.Monad import System.Mem.StableName main :: IO () main = replicateM_ 100000 (makeStableName foo) foo :: Int foo = 1 }}} It seems to happen largely at random. The 100000 calls to `makeStableName` in the above example essentially guarantee its occurrence, but I have observed it happen with far fewer. The reason this bug was discovered is it is causing frequent failures in Accelerate on 7.8.2. See [https://github.com/AccelerateHS/accelerate/issues/162] In that case it seems to be causing more `strange closure type` errors than segfaults, but I assume it is the same root cause. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9078> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 24

[GHC] #10686: Process stops responding to sigINT
by GHC 22 Jun '16

22 Jun '16

#10686: Process stops responding to sigINT -------------------------------------+------------------------------------- Reporter: hamish | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.10.1 Keywords: | Operating System: Unknown/Multiple Architecture: | Type of failure: None/Unknown Unknown/Multiple | Test Case: | Blocked By: Blocking: | Related Tickets: Differential Revisions: | -------------------------------------+------------------------------------- Every now and then the leksah-server process has required a kill -9 it to get rid of it. Now Leksah is using the threaded RTS it seems to be happening in Leksah too. It is worse in Leksah because child processes inherit the behaviour and do not terminate when sent Leksah sends them sigINT (which Leksah does very frequently). Once the problem arrises it continues until the Leksah is restarted. Both leksah-server and Leksah start child processes using the process package. I think process package and the GHC GC both call blockUserSignals and it only has one place to store savedSignals. My guess is that two calls go into blockUserSignals from different threads before unblockUserSignals is called on either. The result is that when unblockUserSignals is called it does nothing (because savedSignals was overwritten). Perhaps savedSignals could use some kind of thread local storage? Also docs seem to indicate sigprocmask should not be used at all in multithreaded processes. Perhaps the GHC RTS should use pthread_sigprocmask instead? If the calling process delegates Ctrl+C the problem might be largely hidden. The sigINT signal is enabled again in the child fork and the parent will get an exception if the child is terminated with a sigINT. However I believe the parent is still left in a state where it will no longer respond to sigINT if the child process terminates normally (assuming two calls in a row were made to blockUserSignals at some point). The work around for now in Leksah is to reenable sigINT before each createProcess call. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/10686> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 2

[GHC] #8713: libdl, libpthread may be unwanted too
by GHC 21 Jun '16

21 Jun '16

#8713: libdl, libpthread may be unwanted too -------------------------------------+------------------------------------- Reporter: ip1981 | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: libraries/unix | Version: 7.6.3 Keywords: | Operating System: Other Architecture: x86_64 (amd64) | Type of failure: GHC doesn't work Difficulty: Moderate (less | at all than a day) | Test Case: Blocked By: | Blocking: Related Tickets: | -------------------------------------+------------------------------------- I have GHC on an unusual system [1] libdl.so.1, librt.so.1 and some others are "filter libraries": they do not provide real functions (almost all is in libc.so.1), but to make thing work libFOO.so are GNU ld linker scripts: thus linking is successful, libFOO.so.1 is not linked in :-) Unfortunately, runtime linker (ld.so.1) does not understand GNU ld linker scripts. And I get errors like this: {{{ # ghci -package unix GHCi, version 7.6.3: http://www.haskell.org/ghc/ :? for help Loading package ghc-prim ... linking ... done. Loading package integer-gmp ... linking ... done. Loading package base ... linking ... done. Loading package array-0.4.0.1 ... linking ... done. Loading package deepseq-1.3.0.1 ... linking ... done. Loading package bytestring-0.10.0.2 ... linking ... done. Loading package old-locale-1.0.0.5 ... linking ... done. Loading package time-1.4.0.1 ... linking ... done. Loading package unix-2.7.0.0 ... <command line>: can't load .so/.DLL for: /usr/lib/gcc/x86_64-pc-solaris2.11/4.7/../../../x86_64-illumos/libdl.so (ld.so.1: ghc: fatal: /usr/lib/gcc/x86_64-pc- solaris2.11/4.7/../../../x86_64-illumos/libdl.so: unknown file type) }}} The unix package v2.6 had the same issue with librt.so too, in version 2.7 libdl.so remains. I use the attached patch for GHC 7.6.3 to fix this issue. In general I suggest to use AC_SEARCH_LIBS instead of AC_CHECK_LIB [1] http://osdyson.org -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/8713> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 18

[GHC] #9646: Strange performance bug
by GHC 20 Jun '16

20 Jun '16

#9646: Strange performance bug -------------------------------------+------------------------------------- Reporter: erikd | Owner: Type: bug | Status: new Priority: normal | Milestone: Component: Compiler | Version: 7.8.3 Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Unknown | Type of failure: Runtime Blocked By: | performance bug Related Tickets: | Test Case: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- I've been chasing a weird performance bug for about a week now. I've reduced the testcase to the following git repo: https://github.com/erikd/ghc-perfbug-test The Readme.md file in that repo contains an explanation of how to reproduce the issue. The benchmark program in the repo uses Criterion to test the performance of one particular function. Running the program in a particular way results into two significanlty different results. The commands are: {{{ make clean bench-integer.html cp -f bench-integer.html bench-integer-slow.html touch New3/GHC/Integer/Natural.hs && make bench-integer.html }}} The results for one function in the file `New3/GHC/Integer/Natural.hs` is 8 times slower in the first test that the second while the other test function always executes at about the speed. I haven't been able to test this with ghc-7.6.3 because the code uses `isTrue#` which isn't available in 7.6.3. -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9646> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 26

[GHC] #9682: Implement "Add bifunctor related classes to base"-Proposal
by GHC 18 Jun '16

18 Jun '16

#9682: Implement "Add bifunctor related classes to base"-Proposal -------------------------------------+------------------------------------- Reporter: hvr | Owner: ekmett Type: task | Status: new Priority: normal | Milestone: 7.10.1 Component: Core Libraries | Version: Keywords: | Operating System: Architecture: Unknown/Multiple | Unknown/Multiple Difficulty: Moderate (less | Type of failure: than a day) | None/Unknown Blocked By: | Test Case: Related Tickets: | Blocking: | Differential Revisions: -------------------------------------+------------------------------------- See [http://www.haskell.org/pipermail/libraries/2014-April/022844.html original libraries@ proposal] for more details -- Ticket URL: <http://ghc.haskell.org/trac/ghc/ticket/9682> GHC <http://www.haskell.org/ghc/> The Glasgow Haskell Compiler

1 10