November 2008 - Haskell

announce: Workflow-0.1
by Alberto G. Corona 11 Nov '08

11 Nov '08

I needed to to define multiuser web workflows in the most transparent way. I wondered if a state monad could transparently bring automatic checkpointing of each action and automatic resume after failure. In this way a long living computation could be expressed in a single monadic computation. Additionally, for inter process communications, this package includes a primitive for activating a workflow whenever any action result meet certain condition. There are also primitives for start/restart processes, retrieval of intermediate results and unsafe IO actions inside the state monad... http://hackage.haskell.org/cgi-bin/hackage-scripts/package/Workflow Cabal description: Transparent low level support (state logging, resume of the computation, wait for data condition) for long living, event driven processes. Workflow give the two first services to any monadic computation of type (a-> m a) usually m=IO f x >>=\x'-> g x' >>= \x''->... z by prefixing the user with the method "step": step f x >>= \x'-> step g x' >>= \x''->... This means that a workflow can be described with the familiar "do" notation. In principle, there is no other limitation on the syntax but the restriction (a -> m a): All computations consume and produce the same type of data. do notation is supported fully. Workflow export a few primitives that bring the following services: - transparent checkpointing of each step in permanent storage using TCache (step) - resume of the monadic computation at the last checkpoint after soft or hard interruption - use of versioning techniques for storing object changes (using RefSerialize) - retrieval of the object at any previous step - suspend the computation (waitFor) until the input object meet certain conditions. useful for inter-workflow comunications. At the end of the workflow all the intermediate data is erased. see demos and the header of Control.TCache for documentation. This is a piece of code is a loop that imput numbers (demo.hs). there is another process, that check the numbers entered and return Finish when match the desired number. that is detected by this thread and finalize. When number of tries are 9, The process finish, this is detected by the other process and finalizes also. That ilustrates the use of event handling (waitFor) and step execution. askNumbers name d = do step2 $ threadDelay 5000 -- wait for the other tread to process. r <- step (waitFor anything) d -- get the last value of the object with key "try-finish", to look for the other thread actions case r of Finish msg -> step2 $ print msg --the other thread sent a finalize response Try 9 num -> step1 $ return $ Finish "sorry, no more guesses" --send finalization to the wait thread _ -> do nd <- step (askNumber name) d askNumbers name nd where anything= \_-> True

1 0

Announce: FieldTrip library (functional 3D) and mailing list
by Conal Elliott 09 Nov '08

09 Nov '08

FieldTrip [1] is a library for functional 3D graphics. It is intended for building static, animated, and interactive 3D geometry, efficient enough for real-time synthesis and display. Since FieldTrip is functional, one describes what models are, not how to render them (being rather than doing). Surfaces are described as functions from 2D space to 3D space. As such, they are intrinsically curved rather than faceted. Surface rendering tessellates adaptively, caching tessellations in an efficient, infinite data structure (from the MemoTrie library) for reuse. Surface normals are computed automatically and exactly, using the derivative tools in the vector-space library. For animation or interaction, FieldTrip can be used with the Reactive [2] library for functional reactive programming (and possibly other animation frameworks). By design, FieldTrip is completely orthogonal to any formulation or implementation of FRP. The reactive-fieldtrip [3] library links Reactive and FieldTrip. FieldTrip now has a mailing list [4] and a feature/bug tracker [5]. [1] http://haskell.org/haskellwiki/FieldTrip [2] http://haskell.org/haskellwiki/reactive [3] http://haskell.org/haskellwiki/reactive-fieldtrip [4] http://www.haskell.org/mailman/listinfo/FieldTrip [5] http://trac.haskell.org/FieldTrip

1 0

Announce: Reactive library (FRP) and mailing list
by Conal Elliott 09 Nov '08

09 Nov '08

Reactive [1] is a library for functional reactive programming (FRP), similar to the original Fran [2] but with a more modern interface (using standard type classes) and a hybrid push/pull implementation. It is designed to be used in a variety of contexts, such as interactive 2D and 3D graphics, graphical user interfaces, web services, and automatic recompilation/re-execution. It has a simple and precise semantics based on continuous time and is built on a notion of functional future values. The semantics and implementation are described in the paper "Simply efficient functional reactivity" [3]. Reactive now has a mailing list [4] and a feature/bug tracker [5]. [1] http://haskell.org/haskellwiki/Reactive [2] http://conal.net/Fran [3] http://conal.net/papers/simply-reactive [4] http://www.haskell.org/mailman/listinfo/reactive [5] http://trac.haskell.org/reactive

2 1

Haskell Weekly News: Issue 92 - November 8, 2008
by Brent Yorgey 08 Nov '08

08 Nov '08

--------------------------------------------------------------------------- Haskell Weekly News http://sequence.complete.org/hwn/20081108 Issue 92 - November 08, 2008 --------------------------------------------------------------------------- Welcome to issue 92 of HWN, a newsletter covering developments in the [1]Haskell community. GHC 6.10 is released!! Go forth and drool over its new features. Be sure to have the editline libraries (libedit-dev on Debian/Ubuntu, for example) installed before you try building it. Announcements GHC version 6.10.1. Ian Lynagh [2]announced the release of [3]GHC version 6.10.1! This new major release features a number of significant changes, including wild-card patterns, punning, and field disambiguation in record syntax; generalised quasi-quotes; generalised SQL-like list comprehensions; view patterns; a complete reimplementation of type families; parallel garbage collection; a new extensible exception framework; a more user-friendly API; included Data Parallel Haskell (DPH); and more! See [4]the full release notes for more information. new community.haskell.org features: webspace, mailing lists. Ian Lynagh [5]announced that the community server, http://community.haskell.org/, has two new features for hosted projects: project webspace, and project mailing lists. GHC blog. Simon Marlow [6]has set up a [7]GHC blog. This is for all things related to GHC, particularly people working on GHC to blog about what they're up to. If you want a write-bit, sign up for a [8]wordpress account, let Simon know your account name, and blog away! The GHC blog should be syndicated on [9]Planet Haskell soon. Haddock 2.4.0. David Waern [10]announced a [11]new release of [12]Haddock, the Haskell documentation tool. This is a later version than the one shipped with GHC 6.10.1, which is version 2.3.0. That version will not be released on Hackage since it only builds with GHC 6.10.1 (by accident, actually). Besides adding back support for earlier GHC versions, this release contains some more fixes and support for HTML frames. htags-1.0. David Sankel [13]announced the [14]htags package, a tag file generator to enable extra functionality in editors like vim. It expands upon hasktags by using a full Haskell 98 parser and options for recursion. Haskell Quick Reference (1-page PDF). Malcolm Wallace [15]sent a 1-page Haskell quick reference prepared for a recent Haskell tutorial. Permission is granted for anyone to distribute it more widely as they wish, in the hope that it might be useful. Editable sources can be passed along if anyone would like to extend it. Proposal for associated type synonyms in Template Haskell. Thomas van Noort [16]submitted a proposal for adding associated type synonyms to Template Haskell. Comments are welcomed. announce [("InfixApplicative", 1.0), ("OpenGLCheck", 1.0), ("obj", 0.1)]. Thomas Davie [17]announced the upload of a few packages to Hackage which he has produced while working at Anygma. [18]obj-0.1 is a library for loading and writing obj 3D models; [19]OpenGLCheck-1.0 is a micro-package containing instances of Arbitrary for the data structures provided in Graphics.Rendering.OpenGL; and [20]InfixApplicative-1.0 is a second micro-package containing a pair of functions (<^) and (^>) which can be used to provide an infix version of liftA2 applied to an operator. Graphalyze-0.5 and SourceGraph-0.3. Ivan Lazar Miljenovic [21]announced the latest versions of [22]Graphalyze and [23]SourceGraph, which fix a couple of bugs in the previous versions. zlib and bzlib 0.5 releases. Duncan Coutts [24]announced updates to the [25]zlib and [26]bzlib packages, featuring a slightly nicer extended API. The simple API that most packages use is unchanged. There is also a new parameter to control the size of the first output buffer; this lets applications save memory when they happen to have a good estimate of the output size. Discussion Efficient parallel regular expressions. Martijn van Steenbergen [27]asked about efficiently running multiple regular expressions in parallel, leading to an interesting discussion of regular expressions and various parsing methods and libraries. Problems with strictness analysis?. Patai Gergely started an informative [28]discussion about strictness, laziness, strictness analysis, and compiler optimization. If you don't know a lot about these topics but would like to learn, this thread is a good starting point! Jobs 1-year postdoc position in Chalmers Functional Programming group. John Hughes [29]announced a position for a post-doctoral researcher with the Chalmers Functional Programming Group, with a one-year tax-free stipend funded by Intel. The funded project will develop a Domain Specific Language (DSL) for high level modelling, design and analysis of hardware and microarchitectures. Blog noise [30]Haskell news from the [31]blogosphere. * Edward Kmett: [32]Still Alive. Edward is still alive but sadly lost a few recursion scheme posts. =( * >>> Max Rabkin: [33]Beautiful folding. A very cool post about composable folds! * Eric Kow (kowey): [34]timesheet helper. * Philip Wadler: [35]A bizarre function over streams. * David Sankel: [36]Introducing Reactive: Events. A very readable introduction to the Reactive library. I look forward to reading more! * "FP Lunch": [37]Numbers vs Sets. * Mark Jason Dominus: [38]Addenda to recent articles 200810. * Darcs: [39]darcs weekly news #11. * >>> Ken G.: [40]Haskell?. Ken shares some thoughts on Real World Haskell. * Real-World Haskell: [41]Some early reviews. * David Sankel: [42]freeglut + Windows + HOpenGL + HGLUT. * GHC mutterings: [43]GHC 6.10.1 is out!. * Chung-chieh Shan: [44]Cognitive jobs. * London Haskell Users Group: [45]Duncan Coutts: The Haskell Platform. The abstract for Duncan's talk at the London HUG. * Well-Typed.Com: [46]GHC 6.10.1 released!. * Well-Typed.Com: [47]Haskell Platform talk at the London Haskell Users Group. * Mark Wassell: [48]GIS with Haskell 1. * >>> phoenix: [49]Haskell Tricks: Indexing a List. Getting the index of an element satisfying a predicate by zipping. * JP Moresmau: [50]Haskell for counting votes!. JP illustrates five different voting methods with some Haskell implementations. * Ivan Lazar Miljenovic: [51]Graph Theoretic Analysis of Relationships within Discrete Data. * Braden Shepherdson: [52]Pimp Your XMonad #1: Status bars. The first in a planned series of articles on not-so-well-known ways to extend your xmonad configuration. * >>> Cory: [53]Euler and Haskell. Cory just started learning Haskell (a "fun, slightly ridiculous language") via Project Euler. * >>> Sadek Drobi: [54]Code Safety and Correctness is a matter of Mindset Cultured by the Language. * Well-Typed.Com: [55]zlib and bzlib package updates. * >>> Bryan St. Amour: [56]Haskell Solution To The Farmer Problem. * >>> Nathan Hartman: [57]Haskell, Lambert, and the Clarke Ellipsoid. Nathan has started porting a map projection library to Haskell. * David Sankel: [58]Analysis of lazy-stream programs.. Quotes of the Week * Cory: Any language which makes frequent use of monads, functors and has a wikibook describing its relation to category theory is the result of an evil genius (or several, to be precise). * mmorrow: in langs with dependent types, you can just map numbers directly to types instead of having to ride a unicycle along a tightrope while battling an unruly gang of monkeys with knives. * conal: -fsemantics-shemantics * roconnor: all sorts of wonderful things could be done if we are less anal about bottoms. No pun intended. About the Haskell Weekly News New editions are posted to [59]the Haskell mailing list as well as to [60]the Haskell Sequence and [61]Planet Haskell. [62]RSS is also available, and headlines appear on [63]haskell.org. To help create new editions of this newsletter, please see the information on [64]how to contribute. Send stories to byorgey at cis dot upenn dot edu. The darcs repository is available at darcs get [65]http://code.haskell.org/~byorgey/code/hwn/ . References 1. http://haskell.org/ 2. http://article.gmane.org/gmane.comp.lang.haskell.glasgow.user/15591 3. http://www.haskell.org/ghc/ 4. http://haskell.org/ghc/docs/6.10.1/html/users_guide/release-6-10-1.html 5. http://article.gmane.org/gmane.comp.lang.haskell.general/16600 6. http://article.gmane.org/gmane.comp.lang.haskell.glasgow.user/15603 7. http://ghcmutterings.wordpress.com/ 8. http://wordpress.com/ 9. http://planet.haskell.org/ 10. http://www.haskell.org//pipermail/haskell-cafe/2008-November/050271.html 11. http://hackage.haskell.org/cgi-bin/hackage-scripts/package/haddock-2.4.0 12. http://www.haskell.org/haddock 13. http://article.gmane.org/gmane.comp.lang.haskell.general/16582 14. http://hackage.haskell.org/cgi-bin/hackage-scripts/package/htags 15. http://article.gmane.org/gmane.comp.lang.haskell.cafe/47344 16. http://article.gmane.org/gmane.comp.lang.haskell.cafe/47301 17. http://article.gmane.org/gmane.comp.lang.haskell.cafe/47241 18. http://hackage.haskell.org/cgi-bin/hackage-scripts/package/obj 19. http://hackage.haskell.org/cgi-bin/hackage-scripts/package/OpenGLCheck 20. http://hackage.haskell.org/cgi-bin/hackage-scripts/package/InfixApplicative 21. http://article.gmane.org/gmane.comp.lang.haskell.cafe/47171 22. http://hackage.haskell.org/cgi-bin/hackage-scripts/package/Graphalyze 23. http://hackage.haskell.org/cgi-bin/hackage-scripts/package/SourceGraph 24. http://article.gmane.org/gmane.comp.lang.haskell.cafe/47144 25. http://hackage.haskell.org/cgi-bin/hackage-scripts/package/zlib 26. http://hackage.haskell.org/cgi-bin/hackage-scripts/package/bzlib 27. http://thread.gmane.org/gmane.comp.lang.haskell.cafe/47242 28. http://thread.gmane.org/gmane.comp.lang.haskell.cafe/47183 29. http://article.gmane.org/gmane.comp.lang.haskell.general/16596 30. http://planet.haskell.org/ 31. http://haskell.org/haskellwiki/Blog_articles 32. http://comonad.com/reader/2008/still-alive/ 33. http://squing.blogspot.com/2008/11/beautiful-folding.html 34. http://koweycode.blogspot.com/2008/11/timesheet-wishlist.html 35. http://wadler.blogspot.com/2008/11/bizarre-function-over-streams.html 36. http://netsuperbrain.com/blog/posts/introducing-reactive-events/ 37. http://sneezy.cs.nott.ac.uk/fplunch/weblog/?p=114 38. http://blog.plover.com/addenda/200810.html 39. http://blog.darcs.net/2008/11/darcs-weekly-news-11.html 40. http://monolith149daily.blogspot.com/2008/11/haskell.html 41. http://www.realworldhaskell.org/blog/2008/11/06/some-early-reviews/ 42. http://netsuperbrain.com/blog/posts/freeglut-windows-hopengl-hglut/ 43. http://ghcmutterings.wordpress.com/2008/11/05/ghc-6101-is-out/ 44. http://conway.rutgers.edu/~ccshan/wiki/blog/posts/Cognitive_jobs/ 45. http://www.londonhug.net/2008/11/04/duncan-coutts-the-haskell-platform/ 46. http://blog.well-typed.com/2008/11/ghc-6101-released/ 47. http://blog.well-typed.com/2008/11/haskell-platform-talk-at-the-london-hask… 48. http://pound-stone.blogspot.com/2008/11/gis-with-haskell-1.html 49. http://phoenixblitz.blogspot.com/2008/11/haskell-tricks-indexing-list.html 50. http://jpmoresmau.blogspot.com/2008/11/haskell-for-counting-votes.html 51. http://ivanmiljenovic.wordpress.com/2008/11/03/graph-theoretic-analysis-of-… 52. http://braincrater.wordpress.com/2008/11/02/pimp-your-xmonad-1-status-bars/ 53. http://onag.blogspot.com/2008/11/euler-and-haskell.html 54. http://sadekdrobi.com/2008/11/02/code-safety-and-correctness-is-a-matter-of… 55. http://blog.well-typed.com/2008/11/zlib-and-bzlib-package-updates/ 56. http://bryanstamour.com/?p=49 57. http://parsemymonad.blogspot.com/2008/10/haskell-lambert-and-clarke-ellipso… 58. http://netsuperbrain.com/blog/posts/analysis-of-lazy-stream-programs/ 59. http://www.haskell.org/mailman/listinfo/haskell 60. http://sequence.complete.org/ 61. http://planet.haskell.org/ 62. http://sequence.complete.org/node/feed 63. http://haskell.org/ 64. http://haskell.org/haskellwiki/HWN 65. http://code.haskell.org/~byorgey/code/hwn/

1 0

ANN: new community.haskell.org features: webspace, mailing lists
by Ian Lynagh 07 Nov '08

07 Nov '08

Hi all, The Community server, http://community.haskell.org/, has two new features for hosted projects. The first is project webspace. You can now make a website for your project visible at http://projects.haskell.org/yourproject/ See http://community.haskell.org/admin/using_project.html#projectweb for details. The second is mailing lists. You can now create a yourproject(a)projects.haskell.org mailing list. See http://community.haskell.org/admin/using_project.html#mailinglists for details. For more details about the community server, and to request an account, please see the website at http://community.haskell.org/ Thanks Ian, on behalf of the community admin team

2 1

ANNOUNCE: lhs2tex-1.14
by Andres Loeh 07 Nov '08

07 Nov '08

lhs2TeX version 1.14 ==================== We are pleased to announce a new release of lhs2TeX, a preprocessor to generate LaTeX code from literate Haskell sources. lhs2TeX includes the following features: * Highly customized output. * Liberal parser -- no restriction to Haskell 98. * Generate multiple versions of a program or document from a single source. * Active documents: call Haskell to generate parts of the document (useful for papers on Haskell). * A manual explaining all the important aspects of lhs2TeX. Changes (w.r.t. lhs2TeX 1.13) ----------------------------- * Compatible with cabal-1.6; traditional configure/make installation should still work. * Unicode support. * Support for Agda's lexing rules (via --agda flag). * Minor bugfixes. Requirements and Download ------------------------- A source distribution is available from http://people.cs.uu.nl/andres/lhs2tex/ and, of course, via Hackage: http://hackage.haskell.org/cgi-bin/hackage-scripts/package/lhs2tex Should work on all major platforms, but has mainly been tested on Linux. Binaries will be made available on request. You need a recent version of GHC (6.8.{2,3} are tested, older versions might work) to build lhs2TeX, and, of course, you need a TeX distribution to make use of lhs2TeX's output. The program includes a configuration that is suitable for use with LaTeX. In theory, there should be no problem to generate code for other TeX flavors, such as plainTeX or ConTeXt. Happy lhs2TeXing, Andres Loeh and Ralf Hinze -- Andres Loeh, Universiteit Utrecht mailto:andres@cs.uu.nl mailto:mail@andres-loeh.de http://www.andres-loeh.de

3 2

ANNOUNCE: Haddock version 2.4.0
by David Waern 06 Nov '08

06 Nov '08

-------------------------------------------- -- Haddock 2.4.0 -------------------------------------------- A new version of Haddock, the Haskell documentation tool, is out. This is a later version than the one shipped with GHC 6.10.1, which is version 2.3.0. That version will not be released on Hackage since it only builds with GHC 6.10.1 (by accident, actually). Besides adding back support for earlier GHC versions, this release contains some more fixes and support for HTML frames. Please use the bug tracker to submit bug reports or feature requests. -------------------------------------------- -- Changes in version 2.4.0 -------------------------------------------- * Add framed view of the HTML documentation * Build with GHC 6.8.2 and 6.8.3 again * Support images in documentation comments again * Small improvements to the Hoogle output * A few bugs has been fixed -------------------------------------------- -- Changes in version 2.3.0 -------------------------------------------- * Support for GHC 6.10.1 * Slightly improved space usage * Fix a bug that made hidden modules show up in the contents & index pages * Fix a bug that made Haddock load modules twice * Improvements to the Hoogle output -------------------------------------------- -- Links -------------------------------------------- Homepage: http://www.haskell.org/haddock Hackage page: http://hackage.haskell.org/cgi-bin/hackage-scripts/package/haddock-2.4.0 Bugtracker and wiki: http://trac.haskell.org/haddock Mailing list: haskelldoc(a)haskell.org Code repository: http://code.haskell.org/haddock -------------------------------------------- -- Contributors -------------------------------------------- The persons who contributed to the 2.3.0 and 2.4.0 releases are: Clemens Fruhwirth Peter Gavin Ian Lynagh Neil Mitchell Luke Plant Thomas Schilling David Waern -------------------------------------------- -- Get Involved -------------------------------------------- We welcome new contributors. To get involved, start by grabbing the code: http://code.haskell.org/haddock Then take a look at the bug and feature tracker for things to work on: http://trac.haskell.org/haddock

2 1

1-year postdoc position in Chalmers Functional Programming group
by John Hughes 05 Nov '08

05 Nov '08

The Chalmers Functional Programming Group would like to recruit a post-doctoral researcher for a one-year tax-free stipend funded by Intel. The funded project will develop a Domain Specific Language (DSL) for high level modelling, design and analysis of hardware and microarchitectures. We will concentrate on providing language support for the abstractions involved. Intel funded the following research proposal by Mary Sheeran and Koen Claessen from the FP group and Per Larsson-Edefors from the VLSI group: http://www.cs.chalmers.se/~ms/IntelProp.pdf Our contact person at Intel is Carl Seger, who is visiting faculty at our Department. We have been working with Intel for some years, and find the contact to be very stimulating. Our most recent project was on Wired, a DSL for low level hardware design, documented in Emil Axelsson's recent PhD thesis: http://www.cs.chalmers.se/~emax/documents/PhD_thesis.pdf We are looking for a researcher with a very strong background and research record in functional programming, and preferably also in domain specific languages. We will work in Haskell, given the expertise available in the group. We feel that knowledge of functional programming is most important, but of course an interest in hardware or architectural modelling would also be an advantage. We would like to get the project underway on Jan. 1 2009 or as soon as possible thereafter. For further information about the project, our group and Chalmers, please contact Mary Sheeran (ms at chalmers.se). An application, which should be sent by email to both Mary and Koen Claessen (koen at chalmers.se), should consist of your CV, a list of publications with links to relevant papers, and a brief description of your research to date. The deadline for applications is December 1 2008. To be eligible, you must have a doctorate from a non-Swedish University. We will plan to interview suitable candidates. The Chalmers Functional Programming group has as its senior members John Hughes, Mary Sheeran, Koen Claessen, Patrik Jansson and Björn von Sydow, as well as around 8 post-docs and doctoral students. Much of our work has centred on DSLs (QuickCheck, Lava, Wired) and we are embarking on both this project and a project with Ericsson to develop a DSL for Digital Signal Processing algorithm design. One of our doctoral students, Joel Svensson, is developing a DSL for GPU programming. We provide an excellent research environment, and can also strongly recommend Göteborg as a great place to live. The project is initially funded for a year, but we are hopeful of obtaining continued funding for this work. John Hughes

1 0

ANN: The Haskell-Beginners mailing list has now been added to the fa.haskell Usenet gateway.
by Benjamin L.Russell 05 Nov '08

05 Nov '08

With the help of Kjetil Torgrim Homme, the administrator for the gateway at fa.* (including fa.haskell) (see "fa.* groups - news.groups | Google Groups" at http://groups.google.com/group/news.groups/msg/cce2e80da2f608ca) as well as some critical information from Jeffrey M. Vinocur on comp.lang.haskell and comp.lang.functional (see "adding a mailing list to fa.haskell? - comp.lang.functional | Google Groups" at http://groups.google.com/group/comp.lang.functional/browse_thread/thread/ce…) and some account management on my part, the Haskell-Beginners mailing list has finally been added to the fa.haskell Usenet newsgroup! fa.haskell - nntpnews.net http://www.nntpnews.net/f2460/ Previously, only the Haskell and Haskell-Cafe mailing lists were echoed. You can now read Haskell-Beginners even when the Gmane mailing list archive (see http://www.gmane.org/) is down with a newsreader on fa.haskell (although, since the gateway is unidirectional, you cannot post with fa.haskell--use the mailing list or Gmane for that). Many thanks to Jeffrey M. Vinocur on comp.lang.haskell and comp.lang.functional for his timely information on who was in charge of fa.haskell, and to Kjetil Torgrim Homme, the administrator of fa.haskell. Without their help, this addition would not have been possible. -- Benjamin L. Russell

1 0

Re: ANNOUNCE: GHC version 6.10.1 - MacOS installer
by Brandon S. Allbery KF8NH 05 Nov '08

05 Nov '08

On 2008 Nov 4, at 20:26, Jason Dagit wrote: > On Tue, Nov 4, 2008 at 4:26 PM, Manuel M T Chakravarty > <chak(a)cse.unsw.edu.au> wrote: >> Jason Dagit: >>> I'm on OSX and I currently have ghc-6.6.1 and ghc-6.8.3 (installed >>> from a pkg). I would like to add ghc-6.10.1 to my system. I tried >>> to >>> do this with RC1 of 6.10, but I found that it uninstalled my >>> ghc-6.8.3. >>> >>> What will I need to do to get both 6.8.3 and 6.10.1? >> >> Are you sure it does deinstall the 6.8 compiler? Or does it just >> overwrite >> the symbolic links in /usr/bin? To check, have a look at >> >> /Library/Frameworks/GHC.framework/Versions >> >> After installing 6.10, there should be a 608/ and a 610/ >> directory. This >> certainly happens on my Mac and I am not aware of an option to >> change that >> behaviour. > > I haven't tried the 6.10.1 install, but after using the 6.8.3 pkg > followed by the 6.10 RC1 pkg, followed by the 6.8.3 pkg, I have just > 608 in the directory you mention. I expect if you used the OSX installer then /Library/Receipts is screwing you (it wipes the old files listed in the .bom file). Try finding and removing the receipt directory and bom file before installing. -- brandon s. allbery [solaris,freebsd,perl,pugs,haskell] allbery(a)kf8nh.com system administrator [openafs,heimdal,too many hats] allbery(a)ece.cmu.edu electrical and computer engineering, carnegie mellon university KF8NH

1 0