- Haskell - Haskell.org

Six PhD-positions
by Jeroen Voeten 28 Oct '02

28 Oct '02

************************************************************* * We apologize, if you receive this message more than once. * * We apologize, if this message does not concern you. * ************************************************************* Academic Research with Industrial Focus For the Boderc project the Embedded Systems Institute searches candidates for six PhD-positions. Boderc project Beyond the Ordinary: Design of Embedded Real-time Control The Boderc project focuses on distributed embedded real-time controllers of complex systems. An Oce printer is taken as a case-study and acts as a driver for the project. The target is an integral approach for a systematic architectural design, modeling, analysis, and validation methodology of such heterogeneous systems. A background in one of the basic disciplines (mechanics, electronics, computer science) and an open mind to solutions in the other domains is essential. In this project seven parties (four industrial companies: Océ Technologies, Philips CFT, AAS, Turnkiek, and three universities: Technische Universiteit Eindhoven, Universiteit Nijmegen, Universiteit Twente) co-operate with the Embedded Systems Institute. The project location will be mainly Eindhoven / Venlo. You receive an appointment as Ph.D. student for four years at one of the three participating universities. The project is partly subsidized by the Ministry of Economic Affairs. Six PhD Positions 1. Technische Universiteit Eindhoven, department of Electrical Engineering, Control Systems group. Required: interest to work on the boundary of computer science (automata, transition systems, formal verification tools) and control theory (differential equations, dynamics, simulation, optimization). Topic: combine, extend and apply the available tools in these disciplines for embedded control design. The tasks include contributing to the integral specification model and developing analysis techniques for performance evaluation and exception handling. Contact and information: dr.ir. Maurice Heemels, phone +31 40 2473587, e-mail: m.heemels(a)tue.nl 2. Technische Universiteit Eindhoven, department of Electrical Engineering, Information and Communication Systems group. Required: background in electrical engineering or computer science. He or she has a strong affinity with system-level design methodology and (formal) models of computation. Topic: development of methods and tools for system specification, system verification, performance modeling, architecture exploration and design of distributed real-time embedded control systems. Contact and information: dr.ir. Jeroen Voeten, phone +31 40 2474267, e-mail: J.P.M.Voeten(a)tue.nl 3. Technische Universiteit Eindhoven, department of Mechanical Engineering, Control Systems Technology group. Topic: modelling of (controlled) mechanics and mechatronics, and focus on model reduction for hybrid systems. In addition, the PhD student will play a leading role in experimental validation and controller evaluation. Contact and information: prof.dr.ir. Maarten Steinbuch, phone +31 40 2475444, e-mail: m.steinbuch(a)tue.nl 4. Technische Universiteit Eindhoven, department of Mechanical Engineering, Dynamics and Control group. Topic: development of analysis tools for mechatronic systems described by hybrid models. These tools should support the model validation, model reduction and the performance assessment of such systems. Contact and information: prof.dr. H. Nijmeijer, phone +31 40 2473203, e-mail: h.nijmeijer(a)tue.nl 5. Universiteit Nijmegen, faculty of Science, Mathematics and Computing Science, Informatics for Technical Applications group. Topic: to integrate UML-based software design for embedded systems into a common framework that is suitable for multi-disciplinary system engineering. This involves hybrid modeling, architectural descriptions and high-level analysis based on formal methods and tools. Contact and information: dr. Jozef Hooman, phone +31 24 3652590, e-mail: hooman(a)cs.kun.nl 6. Universiteit Twente, faculty of Electrical Engineering, Control Engineering group. Topic: distributed controller architectures for mechatronic systems. The aim is to design and validate distributed controller architectures for distributed embedded computer systems. Existing methods (e.g. multi-agent technologies, CSP-based communication abstraction software layers) can be used as starting point. Feasibility must be demonstrated using lab setups with HIL-simulation. Contact and information: dr.ir. J.F. Broenink, phone: +31 53 489 2793, e-mail: J.F.Broenink(a)utwente.nl Required profile for all six positions * Master's degree in one of the disciplines mentioned * Affinity to research with an industrial focus * Team player, open-minded * Active participation in knowledge sharing Employment * A full-time employment for four years, with an intermediate evaluation after one year. * A salary conforming the standard regulations. * Support for your personal development and career planning. * Attractive secondary labor conditions. Your reaction Information about the Boderc project may be obtained from the project manager Frans Beenker, phone: +31 40 2475020 (frans.beenker(a)embeddedsystems.nl) or from the people mentioned in the descriptions of the positions. Please send your application (letter and curriculum vitae), indicating the position(s) you apply for, to: Embedded Systems Institute Laplace Building Attn: Boderc-positions P.O. Box 513 5600 MB EINDHOVEN The Netherlands Application may also be emailed to: office(a)embeddedsystems.nl ____________________________________________________________________________ ____________________________________________________ The Embedded Systems Institute, located in Eindhoven, the Netherlands, is a research institute recently founded by a number of universities and industrial companies. For more information: www.embeddedsystems.nl

1 0

Haskell2LaTeX
by Ian Lynagh 27 Oct '02

27 Oct '02

Hi all, This is just a quick note to let you know that Haskell2LaTeX, my undergraduate project, is available from http://web.comlab.ox.ac.uk/oucl/work/ian.lynagh/Haskell2LaTeX/ In a nutshell it parses the code in a literate Haskell script and then writes it out again with the embedded Haskell nicely typeset. I don't think I can explain any better in this medium, so go take a look :-) Enjoy Ian

2 1

Evidence Elimination
by Alejandro Russo 25 Oct '02

25 Oct '02

I try the follow line in hugs (mode 98 enable) Prelude> :t (let f = \x -> x == x in ( f 'a', f 123 ) ) ERROR: Illegal Haskell 98 class constraint in inferred type *** Expression : let {...} in (f 'a',f 123) *** Type : Num Char => (Bool,Bool) Prelude> This happend because Num Char can never be satisfied with a predicate evidence. However in hugs without 98 mode the result of the previos line is : Prelude> :t ( let f = \x -> x == x in (f 'a' , f 123 ) ) let {...} in (f 'a',f 123) :: Num Char => (Bool,Bool) This (maybe) indicates how hugs make evidence elimination in runtime while Haskell 98 don´t do that. I don´t have a clear idea about this, please someone can help me?. Thanks. Alejandro Russo Teacher in Computer Science Rosario National University Argentina

2 1

Call for Papers: 8th ERCIM Workshop on Formal Methods for Industrial Critical Systems
by Wan.Fokkink＠cwi.nl 25 Oct '02

25 Oct '02

Working Group on Formal Methods for Industrial Critical Systems Eighth International Workshop on Formal Methods for Industrial Critical Systems (FMICS 03) http://www.inrialpes.fr/vasy/fmics/workshop-8/ Submission deadline: March 24 2003 Norwegian University of Science and Technology Trondheim, Norway, June 5-7, 2003 Colocated with ERCIM meeting SCOPE OF THE WORKSHOP The aim of the FMICS workshops is to provide a forum for researchers who are interested in the development and application of formal methods in industry. In particular, these workshops are intended to bring together scientists who are active in the area of formal methods and interested in exchanging their experiences in the industrial usage of these methods. These workshops also strive to promote research and development for the improvement of formal methods and tools for industrial applications. Topics include, but are not restricted to: - Tools for the design and development of formal descriptions - Verification and validation of complex, distributed, real-time systems and embedded systems - Verification and validation methods that aim at circumventing shortcomings of existing methods in respect to their industrial applicability - Formal methods based conformance, interoperability and performance testing - Case studies and project reports on formal methods related projects with industrial participation (e.g. safety critical systems, mobile systems, object-based distributed systems) - Application of formal methods in standardization and industrial forums Previous workshops of the ERCIM working group on Formal Methods for Industrial Critical Systems were held in Oxford (March 1996), Cesena (July 1997), Amsterdam (May 1998), Trento (July 1999), Berlin (April 2000), Paris (July 2001), and Malaga (July 2002). PROGRAMME COMMITTEE Finn Arge Aagesen (Norwegian Univ. of Science and Technology, No) Thomas Arts co-chair (IT-Univ. in Gothenburg, Se) Gilles Barthe (INRIA Sophia-Antipolis, Fr) Armin Biere (ETH Zürich, Ch) Jonathan Bowen (South Bank University, Uk) Lubos Brim (Masaryk Univ., Cz) Andrew Butterfield (Dublin Univ., Ie) Muffy Calder (Univ. of Glasgow, Uk) Dennis Dams (Bell Labs, USA) Wan Fokkink co-chair (CWI, Nl) Leszek Holenderski (Philips, Nl) Diego Latella (CNRA/ISTI Pisa, It) Martin Leucker (Uppsala Univ., Se) Radu Mateescu (INRIA Rhone-Alpes, Fr) Pedro Merino Gómez (Malaga Univ., Es) Ina Schieferdecker (GMD FOKUS, De) Antti Valmari (Tampere Univ. of Technology, Fi) -------------------------------------------------------------------------------- LOCAL ORGANISING COMMITTEE The Norwegian university of science and technology hosts the workshop with the following organizing committee: Finn Arve Aagesen (local orgnization chair) Frank Lie Jarle Kotsbak -------------------------------------------------------------------------------- IMPORTANT DATES Deadline for submission: March 24, 2003 Accept/Reject notification: May 5, 2003 Final manuscript: May 19, 2003 Workshop: June 5-7, 2003 -------------------------------------------------------------------------------- SUBMISSIONS Papers submitted to FMICS 03 must be in English and present original research that is unpublished and not submitted for publication elsewhere. The proceedings of the workshop will be published physically by the University of Trondheim and electronically in elseviers ENTCS electronic notes. High quality papers sent to FMICS are candidate for publication in a special issue of the journal for Software Tools for Technology Transfer (STTT). Papers submitted to FMICS 03 should be between 10 and 16 pages, with a clear abstract and list of keywords. Papers should be submitted by e-mail to fmics03(a)ituniv.se. The format should be either standard PostScript (printable by any PostScript device) or PDF (Adobe's Portable Document Format). In both cases, one should use only vectorial ("Type 1") fonts and not bitmap fonts. In case of acceptance of a paper at least one author must present the contribution at the workshop, otherwise it will be removed from the list of publications. It is expected that a special journal issue will be devoted to a sampling of papers presented at FMICS 2003. Since 1998, six special issues related to FMICS have been published (or will appear) in prestigious journals such as Formal Aspects of Computing, Formal Methods in System Design, and Science of Computer Programming.

1 0

RE: Rational sequence
by Simon Peyton-Jones 25 Oct '02

25 Oct '02

| > I definitely can't do that at this stage. I have never liked | > Float/Double/Ratio being in Enum, but there is no possibility of | > removing them now. A year or two ago, maybe. | | Just to clarify: Did you mean for Haskell 98 or did you mean forever? Thanks for raising that I definitely mean "just for Haskell 98" I am not trying to say anything about Haskell-beyond-H98. In fact I have always personally thought it was wrong to have Float/Double/Ratio in Enum at all, but the majority view was otherwise a couple of years ago (for H98). But for post-H98, the field is wide open. Simon

1 0

RE: Rational sequence
by Simon Peyton-Jones 25 Oct '02

25 Oct '02

| | It's inconsistent to remove the "+1/2" for numericEnumFromTo but to leave | the "+(n'-n)" for numericEnumFromThenTo. I think you probably mean to | remove both (actually, all three). | | I wouldn't recommend these changes for Float and Double (the increments | are there to account for arithmetic inexactness), but they do make a lot | of sense to me for (Ratio a), which is exact. Is is too late to consider | such a change? Yes, I think it is. (Too late, that is.) Adding succ/pred makes Ratio exactly consistent with Float/Double. Anything more is opening a new can of worms. Simon "desperately sitting on the lid" PJ

1 0

RE: Rational sequence
by Simon Peyton-Jones 25 Oct '02

25 Oct '02

| Since I suppose you also want to receive constructive suggestions, | I'd suggest to remove some instance definitions from the | report. I definitely can't do that at this stage. I have never liked Float/Double/Ratio being in Enum, but there is no possibility of removing them now. A year or two ago, maybe. The task now is see a local optimum, not a global one. We're in the low-temperature phase of annealing. Simon

2 1

RE: Rational sequence
by Simon Peyton-Jones 24 Oct '02

24 Oct '02

Folks The concrete is setting fast, but Ross points out that the instance for Enum (Ratio a) is inconsistent with that for Enum Float and Enum Double. (It's strange that these non-integral types are in Enum, but we're stuck with that.) All three use 'numericEnumFrom' etc for the enumFrom method, but Float and Double define succ and pred thus: instance Enum Float where succ x = x+1 pred x = x-1 But Ratio does not... it uses the default method for succ/pred which gives instance Integral a => Enum (Ratio a) where succ x = fromInt (1 + (toInt x)) Thus (succ (1.5 :: Float)) is 2.5 but (succ (3%2)) is 2%1 Furthermore, you'd expect that [x..y] would mean the same as [x,succ x .. y] and that is true for Float/Double but not for Ratio. So I propose to modify the instance decl for Ratio by adding explicit defns for succ/pred just like those in Float/Double. Any objections? Simon PS: CUP are typesetting the report now, assuming we can come to happy agreement about copyright etc. On that front, the CUP wheels are grinding, but they grind slow. I'll emit an update when I know something useful.

4 5

CFC: SCP Special Issue on Program Transformation
by Ralf Laemmel 24 Oct '02

24 Oct '02

Not just a few haskell@... subscribers do transformation for/with functional programming. Thanks for passing on to interested authors. -- Ralf Laemmel VU & CWI, Amsterdam, The Netherlands http://www.cs.vu.nl/~ralf/ http://www.cwi.nl/~ralf/ Special Issue on Program Transformation Science of Computer Programming Guest Editor Ralf L�mmel Call for contributions The special issue is devoted to `program transformation' in the broader context of software maintenance. That is, program transformation is meant here in the sense of automated program adaptation by executable transformations. Such transformations are used in software maintenance but also in software development in various ways, e.g., for refactoring, software migration, mass maintenance, change logging, schema evolution, aspect weaving, and others. The special issue seeks high-quality contributions studying the following dimensions of transformations: * formal aspects such as operator suites for transformations and their properties; * language design issues such as suitable language setups and meta-programming frameworks; * infra-structural issues such as the relation to front-ends, program analysis, interfaces; * software engineering aspects such as scaling, testing and maintaining transformations; * emerging fields such as unanticipated software evolution; * case studies such as lessons learned in large-scale transformation projects. Deadline for paper submissions: 1 April 2003 Author's notification: 1 July 2003 Special issue's publication: End of 2003 The submissions should be sent in PS or PDF to the guest editor via email. If you are not sure about the suitability of a given subject, or if you want to know more details about the special issue's intent, do not hesitate to contact the guest editor. The guest editor's email address is ralf@cwi.nl;or see the URL http://www.cwi.nl/~ralf/. For details about the policy of the Science of Computer Programming journal and the requirements for prospective authors, see a recent issue of the journal and check the journal's web site http://www.elsevier.com/locate/issn/01676423.

1 0

FranTk error...
by Euler Marinho 23 Oct '02

23 Oct '02

I was trying execute the "demos.lhs" in the demos directory of FranTk, but an error of kind "Error while importing DLL: ... TCLPrim.dll" occurs. How resolve it? Thanks PS 1: I´m using hugs version of december 2001, in Windows XP. So, I execute FranTk through the batch file in bin directory (According instructions of Readme file). PS 2: The TCL-TK 8.0 is installed. Euler Marinho - Ouro Preto - Minas Gerais - Brazil _________________________________________________________________ MSN Messenger: converse com os seus amigos online. http://messenger.msn.com.br

1 0