October 2010 - xmonad

Re: Issue 240 in xmonad: recompilation fails silently
by codesite-noreply＠google.com 31 Dec '12

31 Dec '12

Updates: Status: Patch Owner: SpencerJanssen Comment #3 on issue 240 by vogt.adam: recompilation fails silently http://code.google.com/p/xmonad/issues/detail?id=240 Attached is a patch to accomplish the same indirectly by checking that the target executable is actually updated. But given that we have enough trouble to include the code for popping up an xmessage to welcome new users, then this patch might not be worth including since it addresses a rarer issue with somewhat more code. Attachments: check-that-the-expected-xmonad__arch__os-is-actually-updated_.dpatch 12.1 KB -- You received this message because you are listed in the owner or CC fields of this issue, or because you starred this issue. You may adjust your issue notification preferences at: http://code.google.com/hosting/settings

1 2

Re: Issue 211 in xmonad: Error output inconsistency
by codesite-noreply＠google.com 31 Dec '12

31 Dec '12

Comment #1 on issue 211 by byorgey: Error output inconsistency http://code.google.com/p/xmonad/issues/detail?id=211 Status? This seems like a pretty simple change, do other developers have an opinion on this? -- You received this message because you are listed in the owner or CC fields of this issue, or because you starred this issue. You may adjust your issue notification preferences at: http://code.google.com/hosting/settings

1 1

Issue 360 in xmonad: shellPromptHere from XMonad.Actions.SpawnOn freezes upon files with Chinese names
by codesite-noreply＠google.com 15 Dec '12

15 Dec '12

Status: New Owner: ---- New issue 360 by wei.hoo: shellPromptHere from XMonad.Actions.SpawnOn freezes upon files with Chinese names http://code.google.com/p/xmonad/issues/detail?id=360 What steps will reproduce the problem? 1. Bind a key combination to shellPromptHere 2. mkdir /tmp/new; cd /tmp/new 3. touch 1; touch 测试 4. Invoke shellPromptHere, type in "emacs /tmp/new/", press TAB What is the expected output? What do you see instead? Observe that the shell prompt window freezes. No keybindings are accepted, such as C-a, C-e, C-g. However, XMonad keybindings are still effective. At this point we have to press M-q to restart XMonad. What version of the product are you using? On what operating system? xmonad-darcs and xmona-contrib-darcs on Arch Linux. GHC-6.12. Are you using an xmonad.hs? Please attach it and the output of "xmonad --recompile". Please provide any additional information below. If we remove /tmp/new/1 and only keep /tmp/new/测试, typing "emacs /tmp/new/ [TAB]" doesn't freeze the shell prompt. The Chinese-named file isn't shown in the completion, but we can still press C-g to cancel the shell prompt. The font I'm using does support Chinese. PS: I kind of remember this wasn't a problem with ghc-6.10, but I'm not sure. Attachments: xmonad.hs 6.8 KB -- You received this message because you are listed in the owner or CC fields of this issue, or because you starred this issue. You may adjust your issue notification preferences at: http://code.google.com/hosting/settings

1 1

Re: Issue 177 in xmonad: xmonad does not follow ICCCM and ignores WM_TAKE_FOCUS protocol
by codesite-noreply＠google.com 04 Dec '12

04 Dec '12

Comment #24 on issue 177 by vogt.adam: xmonad does not follow ICCCM and ignores WM_TAKE_FOCUS protocol http://code.google.com/p/xmonad/issues/detail?id=177 Geoff Reedy's last patch doesn't apply cleanly against latest darcs (due to the merging of extensible state stuff). Attached is a patch bundle including the old ones that probably works as the old one did. Attachments: track-currently-processing-event.dpatch 16.1 KB -- You received this message because you are listed in the owner or CC fields of this issue, or because you starred this issue. You may adjust your issue notification preferences at: http://code.google.com/hosting/settings

4 108

Issue 346 in xmonad: xmonad will not render dialog windows.
by codesite-noreply＠google.com 09 Sep '12

09 Sep '12

Status: New Owner: ---- New issue 346 by Monkey.Andrew: xmonad will not render dialog windows. http://code.google.com/p/xmonad/issues/detail?id=346 What steps will reproduce the problem? Opening (so far) any gtk application's open dialog (file > open), and the dialog will not render, as if it were an invisible window. The proof of its existence lies in how it steals focus from its parent window and how the cursor changes when on top of it. When I move the dialog window, it appears and I can interact with it normally from there on out. This has happened with chromium, firefox, openoffice, and gvbam. What is the expected output? What do you see instead? See above. What version of the product are you using? On what operating system? 0.9 on archlinux Are you using an xmonad.hs? Please attach it and the output of "xmonad --recompile". main=do xmonad $ defaultConfig { terminal ="urxvt -bg black -fg white +sb -tr -sh 50" , modMask =mod4Mask , borderWidth=3 Please provide any additional information below. -- You received this message because you are listed in the owner or CC fields of this issue, or because you starred this issue. You may adjust your issue notification preferences at: http://code.google.com/hosting/settings

1 15

Issue 380 in xmonad: Infer shiftMask given keysyms that otherwise will not be received
by codesite-noreply＠google.com 15 Aug '12

15 Aug '12

Status: Accepted Owner: ---- Labels: Type-Defect Priority-Low New issue 380 by vogt.adam: Infer shiftMask given keysyms that otherwise will not be received http://code.google.com/p/xmonad/issues/detail?id=380 What steps will reproduce the problem? A keybinding to (0, xK_plus) doesn't work What is the expected output? What do you see instead? Instead you have to bind to: (shiftMask, xK_equal) Maybe doing this correctly regardless of the keymap isn't possible, but perhaps a reasonable approximation can be done like this: * if the keymap contains 'unreachable keys' like "M-+", grab "M-+" and "M-S-=" * if we actually get a "M-+", ungrab the "M-S-=", and run the normal action for "M-+" This can be done with a handleEventHook outside of core, but for users, the current workaround is probably easier having an optional handleEventHook to EZConfig (note how uncommon the use of the optional startupHook from that module is). -- You received this message because you are listed in the owner or CC fields of this issue, or because you starred this issue. You may adjust your issue notification preferences at: http://code.google.com/hosting/settings

1 1

Issue 340 in xmonad: Error In Passing Clicks in Multi-Head non-Xinerama Setup
by codesite-noreply＠google.com 11 Aug '12

11 Aug '12

Status: New Owner: ---- New issue 340 by llcawthorne: Error In Passing Clicks in Multi-Head non-Xinerama Setup http://code.google.com/p/xmonad/issues/detail?id=340 What steps will reproduce the problem? 1. Set 'Option "Xinerama" "0"' in xorg.conf in a multi-head non-xrandr setup. 2. Run xmonad on the primary display 3. Run another copy of xmonad, or another WM on the secondary display. What is the expected output? What do you see instead? I should be able to re-enter a window managed by XMonad and click on things after leaving it. There are two different setups that respond slightly differently. 1) Xmonad on DISPLAY 0.0 and No WM on DISPLAY 0.1 (or Openbox). I can leave the XMonad display perfectly every time and click on things on the secondary display. The problem pops up when XMonad needs to re-accept control of the pointer. I come back to my main screen and clicks are not accepted by whatever window I entered into. Buttons highlight like I am over them; links get little boxes around them, but clicks do not register. The problem can be remedied by moving my mouse over any other window on the same display, and things "catch up". Ex: DISPLAY=0.0. I usually run Firefox, and three terminals. DISPLAY=0.1. I usually have Thunderbird open. If I go to Thunderbird, I never have any problem getting there (as long as I am not running XMonad on display 0.1 also). If I come back from thunderbird to Firefox (which is in the master tile), I cannot successfully click anything. If I move my mouse over to a terminal (with or without clicking on it) and then back to Firefox, I can click things fine. 2) Running xmonad on Display 0.0 and Display 0.1 Same as above, except I have problems moving to each display. Previous Example but: If I leave Display 0.0 and go to Thunderbird, I cannot click anything. Once again, messages shadow when the mouse is over them, as do buttons in Thunderbird. If I hit Mod+Shift+Return at this point, the terminal will open on Display 0.0, even though I am on Display 0.1 with my pointer. Now, if I move my pointer back to Display 0.0, I cannot click on Firefox and if I hit Mod+Shift+Return the terminal will open on Display 0.1 even though the mouse is on Display 0.0. Everything is back to normal if I mouse over a terminal and back to Firefox. (This was especially annoying until I figured out what was going on.. Now I run with a clock open on Display 0.1 so I have a second window to mouse over on the way to read my e-mail, because otherwise I had no way to make Thunderbird start receiving clicks). Things work the same with application other than Firefox/Thunderbird termimal in both examples, they are just what I tend to have open. What version of the product are you using? On what operating system? Xmonad 0.8 or Xmonad 0.9. Gentoo Linux or ArchLinux. Are you using an xmonad.hs? Please attach it and the output of "xmonad --recompile". Problem exists with default xmonad.hs or with a custom xmonad.hs (or with a randomly grabbed off the website xmonad.hs). Please provide any additional information below. I can set "Xinerama" "1" and there is no problem; I just don't particularly care for Xinerama. A) It turns off compositing. B) I cannot (at least don't know how to) launch apps to other screens from a prompt (ie 'DISPLAY=:0.2 mplayer -fs South.Park.S01312.avi'). Also, I generally use three monitors, but I can recreate the problem with the secondary card and tertiary monitor removed from my configuration, so it has not been mentioned here. (Things get even stranger when I try running xmonad on all three displays without Xinerama). If you need more info than my wordy description, I have a forum post on the ArchLinux boards and sent a message to the mailing list a bit back relating to this problem. (Note that the first few messages of the posting were before I figured out clearly what was happening). http://bbs.archlinux.org/viewtopic.php?id=83789 -- You received this message because you are listed in the owner or CC fields of this issue, or because you starred this issue. You may adjust your issue notification preferences at: http://code.google.com/hosting/settings

1 3

Re: Issue 276 in xmonad: switching keyboard focus to a wine app is odd
by codesite-noreply＠google.com 28 Feb '12

28 Feb '12

Comment #2 on issue 276 by byorgey: switching keyboard focus to a wine app is odd http://code.google.com/p/xmonad/issues/detail?id=276 What is it about the way xmonad and wine interact that cause this? Obviously keyboard focus works fine for (almost) all other applications, so what's different about wine? -- You received this message because you are listed in the owner or CC fields of this issue, or because you starred this issue. You may adjust your issue notification preferences at: http://code.google.com/hosting/settings

1 4

Re: Issue 339 in xmonad: Support for toggling totem movie player fullscreen
by codesite-noreply＠google.com 02 Jan '12

02 Jan '12

Updates: Summary: Support for toggling totem movie player fullscreen Status: Accepted Labels: -Priority-Low Priority-Medium Comment #5 on issue 339 by wirtwo...(a)gmail.com: Support for toggling totem movie player fullscreen http://code.google.com/p/xmonad/issues/detail?id=339 Nice work audunskaugen. Thanks for researching this and providing the _NET_WM_STATE_FULLSCREEN event hook (totemFullscreen.hs sample xmonad.hs). IMO, this will be good to get into contrib soon to make it available for more usage, testing and further development. There are some aspects to improve so if anyone wants to take on ownership and submit a patch addressing them that would be great. Otherwise if no action in a week or so I'll send a patch to add it to EwmhDesktops as is, initially as a standalone 'fullscreenEventHook'. Eventually, though, I think it would be good to include an improved version in the standard ewmhDesktopsEventHook, plus having it available by itself. (sjanssen feedback on IRC when asked for thoughts as to where to put this: "enabling the full screen event hook in EWMH would be fine, and would probably make sense.") As is it gives more function for totem users and surely some other similar apps too than the current (0.9) situation, but also with some additional work it seems like it can cover uses of the doFullFloat manageHooks with isFullscreen and the fullscreen query alexey attached to http://code.google.com/p/xmonad/issues/detail?id=333 It seems it covers tiled to fullscreen and back usage plus allowing multihead users to focus other screens without affecting fullscreened apps. In my quick tests it works for totem, flash, mplayer, mplayer-plugin, gnome-mplayer plugin. (This is with all fullscreen manageHooks disabled.) It doesn't seem to help with ooimpress unfortunately, nor evince. Areas to address: * Toggling seems less smooth than it should be. In my tests it appears that the window untiles, goes to hinted float size, then finally fullscreen although it's hard to tell as it's very rapid. There is some glitch anyway that I didn't research yet as to cause. Also other tiled windows from the same workspace look briefly as if they are composited with the fullscreen app since they change size to fill the space as the fullscreen app floats. Not sure how much improvement can practically be made here, but hopefully can something close to the nice mapping with fullscreen manageHook. * Whether a window starts out tiled or floating, once toggled fullscreen and back it restores to tiled state. My reading of wm-spec and probably most users expectations is that floats return to float instead. I don't think PositionStore would be needed for this but didn't look into it yet either. audunskaugen, thanks again. If you'd like please send a darcs patch to X.Hooks.EwmhDesktops, or if you want to be credited by some other name you are welcome to email me privately with your preference and I'll include in any patch I prepare. -- You received this message because you are listed in the owner or CC fields of this issue, or because you starred this issue. You may adjust your issue notification preferences at: http://code.google.com/hosting/settings

1 12

Issue 410 in xmonad: Real fullscreen support without floating
by codesite-noreply＠google.com 24 Dec '11

24 Dec '11

Status: New Owner: ---- New issue 410 by demelier.david: Real fullscreen support without floating http://code.google.com/p/xmonad/issues/detail?id=410 The mplayer fullscreen bug is a quite famous right now. Some people use NoBorders as workaround, but the window is still moveable. I mean real fullscreen as the window can't be moved by the user and of course won't have any borders without any workaround. This applies for mplayer's fullscreen mode, not for SDL.

1 3